d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
056e0b5dcd
freebsd-dev/sys/netinet/sctp_pcb.c

6962 lines
194 KiB
C
Raw Normal View History

Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*-
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
* Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
Use consistent text at the begining of the files. MFC after: 3 days
2012-05-23 11:26:28 +00:00
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* this list of conditions and the following disclaimer.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* the documentation and/or other materials provided with the distribution.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <netinet/sctp_os.h>
- most all includes (#include <>) migrate to the sctp_os_bsd.h file - Finally all splxx() are removed - Count error fixed in mapping array which might cause a wrong cumack generation. - Invariants around panic for case D + printf when no invariants. - one-to-one model race condition fixed by using a pre-formed connection and then completing the work so accept won't happen on a non-formed association. - Some additional paranoia checks in sctp_output. - Locks that were missing in the accept code. Approved by: gnn
2007-01-18 09:58:43 +00:00
#include <sys/proc.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_var.h>
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
#include <netinet/sctp_sysctl.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_pcb.h>
#include <netinet/sctputil.h>
#include <netinet/sctp.h>
#include <netinet/sctp_header.h>
#include <netinet/sctp_asconf.h>
#include <netinet/sctp_output.h>
#include <netinet/sctp_timer.h>
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
#include <netinet/sctp_bsd_addr.h>
Adds new dtrace for cwnd functions and lay's groundwork for future dtrace points (rwnd flightsize etc). MFC after: 2 months
2010-11-25 13:39:55 +00:00
#include <netinet/sctp_dtrace_define.h>
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
#include <netinet/udp.h>
Fix the handling of the flowlabel and DSCP value in the SCTP_PEER_ADDR_PARAMS socket option. Honor the net.inet6.ip6.auto_flowlabel sysctl setting. Approved by: re (bz) MFC after: 1 month.
2011-09-14 08:15:21 +00:00
#ifdef INET6
#include <netinet6/ip6_var.h>
#endif
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
#include <sys/sched.h>
#include <sys/smp.h>
#include <sys/unistd.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
VNET_DEFINE(struct sctp_base_info, system_base_info);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* FIX: we don't handle multiple link local scopes */
/* "scopeless" replacement IN6_ARE_ADDR_EQUAL */
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
SCTP6_ARE_ADDR_EQUAL(struct sockaddr_in6 *a, struct sockaddr_in6 *b)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
struct sockaddr_in6 tmp_a, tmp_b;
memcpy(&tmp_a, a, sizeof(struct sockaddr_in6));
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
if (sa6_embedscope(&tmp_a, MODULE_GLOBAL(ip6_use_defzone)) != 0) {
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
return (0);
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
}
memcpy(&tmp_b, b, sizeof(struct sockaddr_in6));
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
if (sa6_embedscope(&tmp_b, MODULE_GLOBAL(ip6_use_defzone)) != 0) {
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
return (0);
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
}
return (IN6_ARE_ADDR_EQUAL(&tmp_a.sin6_addr, &tmp_b.sin6_addr));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void
sctp_fill_pcbinfo(struct sctp_pcbinfo *spcb)
{
/*
* We really don't need to lock this, but I will just because it
* does not hurt.
*/
SCTP_INP_INFO_RLOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
spcb->ep_count = SCTP_BASE_INFO(ipi_count_ep);
spcb->asoc_count = SCTP_BASE_INFO(ipi_count_asoc);
spcb->laddr_count = SCTP_BASE_INFO(ipi_count_laddr);
spcb->raddr_count = SCTP_BASE_INFO(ipi_count_raddr);
spcb->chk_count = SCTP_BASE_INFO(ipi_count_chunk);
spcb->readq_count = SCTP_BASE_INFO(ipi_count_readq);
spcb->stream_oque = SCTP_BASE_INFO(ipi_count_strmoq);
spcb->free_chunks = SCTP_BASE_INFO(ipi_free_chunks);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_RUNLOCK();
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
* Addresses are added to VRF's (Virtual Router's). For BSD we
* have only the default VRF 0. We maintain a hash list of
* VRF's. Each VRF has its own list of sctp_ifn's. Each of
* these has a list of addresses. When we add a new address
* to a VRF we lookup the ifn/ifn_index, if the ifn does
* not exist we create it and add it to the list of IFN's
* within the VRF. Once we have the sctp_ifn, we add the
* address to the list. So we look something like:
*
* hash-vrf-table
* vrf-> ifn-> ifn -> ifn
* vrf |
* ... +--ifa-> ifa -> ifa
* vrf
*
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* We keep these separate lists since the SCTP subsystem will
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* point to these from its source address selection nets structure.
* When an address is deleted it does not happen right away on
* the SCTP side, it gets scheduled. What we do when a
* delete happens is immediately remove the address from
* the master list and decrement the refcount. As our
* addip iterator works through and frees the src address
* selection pointing to the sctp_ifa, eventually the refcount
* will reach 0 and we will delete it. Note that it is assumed
* that any locking on system level ifn/ifa is done at the
* caller of these functions and these routines will only
* lock the SCTP structures as they add or delete things.
*
* Other notes on VRF concepts.
* - An endpoint can be in multiple VRF's
* - An association lives within a VRF and only one VRF.
* - Any incoming packet we can deduce the VRF for by
* looking at the mbuf/pak inbound (for BSD its VRF=0 :D)
* - Any downward send call or connect call must supply the
* VRF via ancillary data or via some sort of set default
* VRF socket option call (again for BSD no brainer since
* the VRF is always 0).
* - An endpoint may add multiple VRF's to it.
* - Listening sockets can accept associations in any
* of the VRF's they are in but the assoc will end up
* in only one VRF (gotten from the packet or connect/send).
*
*/
struct sctp_vrf *
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
sctp_allocate_vrf(int vrf_id)
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
{
struct sctp_vrf *vrf = NULL;
struct sctp_vrflist *bucket;
/* First allocate the VRF structure */
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
vrf = sctp_find_vrf(vrf_id);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (vrf) {
/* Already allocated */
return (vrf);
}
SCTP_MALLOC(vrf, struct sctp_vrf *, sizeof(struct sctp_vrf),
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_M_VRF);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (vrf == NULL) {
/* No memory */
#ifdef INVARIANTS
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
panic("No memory for VRF:%d", vrf_id);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
#endif
return (NULL);
}
/* setup the VRF */
memset(vrf, 0, sizeof(struct sctp_vrf));
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
vrf->vrf_id = vrf_id;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_INIT(&vrf->ifnlist);
vrf->total_ifa_count = 0;
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
vrf->refcount = 0;
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
/* now also setup table ids */
SCTP_INIT_VRF_TABLEID(vrf);
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
/* Init the HASH of addresses */
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
vrf->vrf_addr_hash = SCTP_HASH_INIT(SCTP_VRF_ADDR_HASH_SIZE,
&vrf->vrf_addr_hashmark);
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
if (vrf->vrf_addr_hash == NULL) {
/* No memory */
#ifdef INVARIANTS
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
panic("No memory for VRF:%d", vrf_id);
#endif
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(vrf, SCTP_M_VRF);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
return (NULL);
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* Add it to the hash table */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
bucket = &SCTP_BASE_INFO(sctp_vrfhash)[(vrf_id & SCTP_BASE_INFO(hashvrfmark))];
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_INSERT_HEAD(bucket, vrf, next_vrf);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_add_int(&SCTP_BASE_INFO(ipi_count_vrfs), 1);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (vrf);
}
struct sctp_ifn *
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
sctp_find_ifn(void *ifn, uint32_t ifn_index)
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
{
struct sctp_ifn *sctp_ifnp;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
struct sctp_ifnlist *hash_ifn_head;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* We assume the lock is held for the addresses if that's wrong
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* problems could occur :-)
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
hash_ifn_head = &SCTP_BASE_INFO(vrf_ifn_hash)[(ifn_index & SCTP_BASE_INFO(vrf_ifn_hashmark))];
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
LIST_FOREACH(sctp_ifnp, hash_ifn_head, next_bucket) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifnp->ifn_index == ifn_index) {
return (sctp_ifnp);
}
if (sctp_ifnp->ifn_p && ifn && (sctp_ifnp->ifn_p == ifn)) {
return (sctp_ifnp);
}
}
return (NULL);
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_vrf *
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
sctp_find_vrf(uint32_t vrf_id)
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
{
struct sctp_vrflist *bucket;
struct sctp_vrf *liste;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
bucket = &SCTP_BASE_INFO(sctp_vrfhash)[(vrf_id & SCTP_BASE_INFO(hashvrfmark))];
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_FOREACH(liste, bucket, next_vrf) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (vrf_id == liste->vrf_id) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (liste);
}
}
return (NULL);
}
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
void
sctp_free_vrf(struct sctp_vrf *vrf)
{
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (SCTP_DECREMENT_AND_CHECK_REFCOUNT(&vrf->refcount)) {
Fixes a memory leak when VRF's are in play. Submitted by: Prasad Narasimha (snprasad@cisco.com) Reviewed by: rrs
2008-02-22 15:08:10 +00:00
if (vrf->vrf_addr_hash) {
SCTP_HASH_FREE(vrf->vrf_addr_hash, vrf->vrf_addr_hashmark);
vrf->vrf_addr_hash = NULL;
}
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
/* We zero'd the count */
LIST_REMOVE(vrf, next_vrf);
SCTP_FREE(vrf, SCTP_M_VRF);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_vrfs), 1);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
void
sctp_free_ifn(struct sctp_ifn *sctp_ifnp)
{
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (SCTP_DECREMENT_AND_CHECK_REFCOUNT(&sctp_ifnp->refcount)) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/* We zero'd the count */
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
if (sctp_ifnp->vrf) {
sctp_free_vrf(sctp_ifnp->vrf);
}
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(sctp_ifnp, SCTP_M_IFN);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_ifns), 1);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
}
}
void
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
sctp_update_ifn_mtu(uint32_t ifn_index, uint32_t mtu)
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
{
struct sctp_ifn *sctp_ifnp;
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
sctp_ifnp = sctp_find_ifn((void *)NULL, ifn_index);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (sctp_ifnp != NULL) {
sctp_ifnp->ifn_mtu = mtu;
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
void
sctp_free_ifa(struct sctp_ifa *sctp_ifap)
{
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (SCTP_DECREMENT_AND_CHECK_REFCOUNT(&sctp_ifap->refcount)) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* We zero'd the count */
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
if (sctp_ifap->ifn_p) {
sctp_free_ifn(sctp_ifap->ifn_p);
}
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(sctp_ifap, SCTP_M_IFA);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_ifas), 1);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
}
}
static void
sctp_delete_ifn(struct sctp_ifn *sctp_ifnp, int hold_addr_lock)
{
struct sctp_ifn *found;
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
found = sctp_find_ifn(sctp_ifnp->ifn_p, sctp_ifnp->ifn_index);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (found == NULL) {
/* Not in the list.. sorry */
return;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (hold_addr_lock == 0)
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WLOCK();
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
LIST_REMOVE(sctp_ifnp, next_bucket);
LIST_REMOVE(sctp_ifnp, next_ifn);
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
SCTP_DEREGISTER_INTERFACE(sctp_ifnp->ifn_index,
sctp_ifnp->registered_af);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (hold_addr_lock == 0)
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/* Take away the reference, and possibly free it */
sctp_free_ifn(sctp_ifnp);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
void
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_mark_ifa_addr_down(uint32_t vrf_id, struct sockaddr *addr,
const char *if_name, uint32_t ifn_index)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
{
struct sctp_vrf *vrf;
struct sctp_ifa *sctp_ifap = NULL;
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_RLOCK();
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
vrf = sctp_find_vrf(vrf_id);
if (vrf == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Can't find vrf_id 0x%x\n", vrf_id);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
sctp_ifap = sctp_find_ifa_by_addr(addr, vrf->vrf_id, SCTP_ADDR_LOCKED);
if (sctp_ifap == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Can't find sctp_ifap for address\n");
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
if (sctp_ifap->ifn_p == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "IFA has no IFN - can't mark unuseable\n");
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
if (if_name) {
Cleanup comparison of interface names. MFC after: 1 month.
2011-11-18 09:01:08 +00:00
if (strncmp(if_name, sctp_ifap->ifn_p->ifn_name, SCTP_IFNAMSIZ) != 0) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "IFN %s of IFA not the same as %s\n",
Cleanup comparison of interface names. MFC after: 1 month.
2011-11-18 09:01:08 +00:00
sctp_ifap->ifn_p->ifn_name, if_name);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
} else {
if (sctp_ifap->ifn_p->ifn_index != ifn_index) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "IFA owned by ifn_index:%d down command for ifn_index:%d - ignored\n",
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ifap->ifn_p->ifn_index, ifn_index);
goto out;
}
}
sctp_ifap->localifa_flags &= (~SCTP_ADDR_VALID);
sctp_ifap->localifa_flags |= SCTP_ADDR_IFA_UNUSEABLE;
out:
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_RUNLOCK();
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
void
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_mark_ifa_addr_up(uint32_t vrf_id, struct sockaddr *addr,
const char *if_name, uint32_t ifn_index)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
{
struct sctp_vrf *vrf;
struct sctp_ifa *sctp_ifap = NULL;
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_RLOCK();
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
vrf = sctp_find_vrf(vrf_id);
if (vrf == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Can't find vrf_id 0x%x\n", vrf_id);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
sctp_ifap = sctp_find_ifa_by_addr(addr, vrf->vrf_id, SCTP_ADDR_LOCKED);
if (sctp_ifap == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Can't find sctp_ifap for address\n");
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
if (sctp_ifap->ifn_p == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "IFA has no IFN - can't mark unuseable\n");
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
if (if_name) {
Cleanup comparison of interface names. MFC after: 1 month.
2011-11-18 09:01:08 +00:00
if (strncmp(if_name, sctp_ifap->ifn_p->ifn_name, SCTP_IFNAMSIZ) != 0) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "IFN %s of IFA not the same as %s\n",
Cleanup comparison of interface names. MFC after: 1 month.
2011-11-18 09:01:08 +00:00
sctp_ifap->ifn_p->ifn_name, if_name);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
goto out;
}
} else {
if (sctp_ifap->ifn_p->ifn_index != ifn_index) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "IFA owned by ifn_index:%d down command for ifn_index:%d - ignored\n",
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ifap->ifn_p->ifn_index, ifn_index);
goto out;
}
}
sctp_ifap->localifa_flags &= (~SCTP_ADDR_IFA_UNUSEABLE);
sctp_ifap->localifa_flags |= SCTP_ADDR_VALID;
out:
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_RUNLOCK();
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
/*-
* Add an ifa to an ifn.
* Register the interface as necessary.
* NOTE: ADDR write lock MUST be held.
*/
static void
sctp_add_ifa_to_ifn(struct sctp_ifn *sctp_ifnp, struct sctp_ifa *sctp_ifap)
{
int ifa_af;
LIST_INSERT_HEAD(&sctp_ifnp->ifalist, sctp_ifap, next_ifa);
sctp_ifap->ifn_p = sctp_ifnp;
atomic_add_int(&sctp_ifap->ifn_p->refcount, 1);
/* update address counts */
sctp_ifnp->ifa_count++;
ifa_af = sctp_ifap->address.sa.sa_family;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (ifa_af) {
#ifdef INET
case AF_INET:
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_ifnp->num_v4++;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET6
case AF_INET6:
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_ifnp->num_v6++;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
break;
}
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
if (sctp_ifnp->ifa_count == 1) {
/* register the new interface */
SCTP_REGISTER_INTERFACE(sctp_ifnp->ifn_index, ifa_af);
sctp_ifnp->registered_af = ifa_af;
}
}
/*-
* Remove an ifa from its ifn.
* If no more addresses exist, remove the ifn too. Otherwise, re-register
* the interface based on the remaining address families left.
* NOTE: ADDR write lock MUST be held.
*/
static void
sctp_remove_ifa_from_ifn(struct sctp_ifa *sctp_ifap)
{
LIST_REMOVE(sctp_ifap, next_ifa);
if (sctp_ifap->ifn_p) {
/* update address counts */
sctp_ifap->ifn_p->ifa_count--;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (sctp_ifap->address.sa.sa_family) {
#ifdef INET
case AF_INET:
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_ifap->ifn_p->num_v4--;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET6
case AF_INET6:
sctp_ifap->ifn_p->num_v6--;
break;
#endif
default:
break;
}
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
Use always LIST_EMPTY instead of sometime SCTP_LIST_EMPTY, which is defined as LIST_EMPTY. Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 20:56:14 +00:00
if (LIST_EMPTY(&sctp_ifap->ifn_p->ifalist)) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
/* remove the ifn, possibly freeing it */
sctp_delete_ifn(sctp_ifap->ifn_p, SCTP_ADDR_LOCKED);
} else {
/* re-register address family type, if needed */
if ((sctp_ifap->ifn_p->num_v6 == 0) &&
(sctp_ifap->ifn_p->registered_af == AF_INET6)) {
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
SCTP_DEREGISTER_INTERFACE(sctp_ifap->ifn_p->ifn_index, AF_INET6);
SCTP_REGISTER_INTERFACE(sctp_ifap->ifn_p->ifn_index, AF_INET);
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_ifap->ifn_p->registered_af = AF_INET;
} else if ((sctp_ifap->ifn_p->num_v4 == 0) &&
(sctp_ifap->ifn_p->registered_af == AF_INET)) {
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
SCTP_DEREGISTER_INTERFACE(sctp_ifap->ifn_p->ifn_index, AF_INET);
SCTP_REGISTER_INTERFACE(sctp_ifap->ifn_p->ifn_index, AF_INET6);
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_ifap->ifn_p->registered_af = AF_INET6;
}
/* free the ifn refcount */
sctp_free_ifn(sctp_ifap->ifn_p);
}
sctp_ifap->ifn_p = NULL;
}
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
sctp_add_addr_to_vrf(uint32_t vrf_id, void *ifn, uint32_t ifn_index,
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
uint32_t ifn_type, const char *if_name, void *ifa,
struct sockaddr *addr, uint32_t ifa_flags,
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
int dynamic_add)
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
{
struct sctp_vrf *vrf;
struct sctp_ifn *sctp_ifnp = NULL;
struct sctp_ifa *sctp_ifap = NULL;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
struct sctp_ifalist *hash_addr_head;
struct sctp_ifnlist *hash_ifn_head;
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
uint32_t hash_of_addr;
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
int new_ifn_af = 0;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
#ifdef SCTP_DEBUG
SCTPDBG(SCTP_DEBUG_PCB4, "vrf_id 0x%x: adding address: ", vrf_id);
SCTPDBG_ADDR(SCTP_DEBUG_PCB4, addr);
#endif
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WLOCK();
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_ifnp = sctp_find_ifn(ifn, ifn_index);
if (sctp_ifnp) {
vrf = sctp_ifnp->vrf;
} else {
vrf = sctp_find_vrf(vrf_id);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (vrf == NULL) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
vrf = sctp_allocate_vrf(vrf_id);
if (vrf == NULL) {
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
return (NULL);
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
}
if (sctp_ifnp == NULL) {
/*
* build one and add it, can't hold lock until after malloc
* done though.
*/
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTP_MALLOC(sctp_ifnp, struct sctp_ifn *,
sizeof(struct sctp_ifn), SCTP_M_IFN);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifnp == NULL) {
#ifdef INVARIANTS
Fix some CLANG warnings. One clang warning is left due to the fact that its bogus.. nam->sa_family will not change from AF_INET6 to AF_INET (but clang thinks it does ;-D)
2010-09-05 13:41:45 +00:00
panic("No memory for IFN");
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
#endif
return (NULL);
}
- Fixes cstatic issues found by cisco sa tool (missing frees and such on error legs) - align sctp_sockstore to 64 bit boundary ..
2007-06-18 21:59:15 +00:00
memset(sctp_ifnp, 0, sizeof(struct sctp_ifn));
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifnp->ifn_index = ifn_index;
sctp_ifnp->ifn_p = ifn;
sctp_ifnp->ifn_type = ifn_type;
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
sctp_ifnp->refcount = 0;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifnp->vrf = vrf;
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
atomic_add_int(&vrf->refcount, 1);
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
sctp_ifnp->ifn_mtu = SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index, addr->sa_family);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (if_name != NULL) {
Don't copy uninitialized memory. Also simplify the comparison of interface names. MFC after: 3 days.
2011-11-13 11:53:18 +00:00
snprintf(sctp_ifnp->ifn_name, SCTP_IFNAMSIZ, "%s", if_name);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
} else {
Don't copy uninitialized memory. Also simplify the comparison of interface names. MFC after: 3 days.
2011-11-13 11:53:18 +00:00
snprintf(sctp_ifnp->ifn_name, SCTP_IFNAMSIZ, "%s", "unknown");
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
hash_ifn_head = &SCTP_BASE_INFO(vrf_ifn_hash)[(ifn_index & SCTP_BASE_INFO(vrf_ifn_hashmark))];
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_INIT(&sctp_ifnp->ifalist);
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WLOCK();
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
LIST_INSERT_HEAD(hash_ifn_head, sctp_ifnp, next_bucket);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_INSERT_HEAD(&vrf->ifnlist, sctp_ifnp, next_ifn);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_add_int(&SCTP_BASE_INFO(ipi_count_ifns), 1);
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
new_ifn_af = 1;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ifap = sctp_find_ifa_by_addr(addr, vrf->vrf_id, SCTP_ADDR_LOCKED);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifap) {
/* Hmm, it already exists? */
if ((sctp_ifap->ifn_p) &&
(sctp_ifap->ifn_p->ifn_index == ifn_index)) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Using existing ifn %s (0x%x) for ifa %p\n",
sctp_ifap->ifn_p->ifn_name, ifn_index,
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
(void *)sctp_ifap);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
if (new_ifn_af) {
/* Remove the created one that we don't want */
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_delete_ifn(sctp_ifnp, SCTP_ADDR_LOCKED);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifap->localifa_flags & SCTP_BEING_DELETED) {
/* easy to solve, just switch back to active */
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Clearing deleted ifa flag\n");
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifap->localifa_flags = SCTP_ADDR_VALID;
sctp_ifap->ifn_p = sctp_ifnp;
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
atomic_add_int(&sctp_ifap->ifn_p->refcount, 1);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
exit_stage_left:
SCTP_IPI_ADDR_WUNLOCK();
return (sctp_ifap);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
} else {
if (sctp_ifap->ifn_p) {
/*
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
* The last IFN gets the address, remove the
* old one
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
*/
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Moving ifa %p from %s (0x%x) to %s (0x%x)\n",
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
(void *)sctp_ifap, sctp_ifap->ifn_p->ifn_name,
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_ifap->ifn_p->ifn_index, if_name,
ifn_index);
/* remove the address from the old ifn */
sctp_remove_ifa_from_ifn(sctp_ifap);
/* move the address over to the new ifn */
sctp_add_ifa_to_ifn(sctp_ifnp, sctp_ifap);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
goto exit_stage_left;
} else {
/* repair ifnp which was NULL ? */
sctp_ifap->localifa_flags = SCTP_ADDR_VALID;
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Repairing ifn %p for ifa %p\n",
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
(void *)sctp_ifnp, (void *)sctp_ifap);
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_add_ifa_to_ifn(sctp_ifnp, sctp_ifap);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
goto exit_stage_left;
}
}
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_MALLOC(sctp_ifap, struct sctp_ifa *, sizeof(struct sctp_ifa), SCTP_M_IFA);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifap == NULL) {
#ifdef INVARIANTS
panic("No memory for IFA");
#endif
return (NULL);
}
- errno -> becomes error in sctp_output.c and sctputil.c - SB_CLEAR macro defined and used for sb clearing. - Fix for CMT express_sack_handling did not do proper pseudo-cumack updates. - Get rid of extraneous function that was never used ip_2_ip6_hdr() - Fixed source address selection bug (initialization problem). - Source address selection debug added.
2007-03-19 06:53:02 +00:00
memset(sctp_ifap, 0, sizeof(struct sctp_ifa));
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifap->ifn_p = sctp_ifnp;
atomic_add_int(&sctp_ifnp->refcount, 1);
- Add VRF id to sctp_ifa structure, needed mainly in panda but useful during deletes of ifa's in diff VRF's when applicable.
2007-06-15 03:16:48 +00:00
sctp_ifap->vrf_id = vrf_id;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifap->ifa = ifa;
memcpy(&sctp_ifap->address, addr, addr->sa_len);
sctp_ifap->localifa_flags = SCTP_ADDR_VALID | SCTP_ADDR_DEFER_USE;
sctp_ifap->flags = ifa_flags;
/* Set scope */
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (sctp_ifap->address.sa.sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
{
struct sockaddr_in *sin;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
sin = (struct sockaddr_in *)&sctp_ifap->address.sin;
if (SCTP_IFN_IS_IFT_LOOP(sctp_ifap->ifn_p) ||
(IN4_ISLOOPBACK_ADDRESS(&sin->sin_addr))) {
sctp_ifap->src_is_loop = 1;
}
if ((IN4_ISPRIVATE_ADDRESS(&sin->sin_addr))) {
sctp_ifap->src_is_priv = 1;
}
sctp_ifnp->num_v4++;
if (new_ifn_af)
new_ifn_af = AF_INET;
break;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
{
/* ok to use deprecated addresses? */
struct sockaddr_in6 *sin6;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
sin6 = (struct sockaddr_in6 *)&sctp_ifap->address.sin6;
if (SCTP_IFN_IS_IFT_LOOP(sctp_ifap->ifn_p) ||
(IN6_IS_ADDR_LOOPBACK(&sin6->sin6_addr))) {
sctp_ifap->src_is_loop = 1;
}
if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr)) {
sctp_ifap->src_is_priv = 1;
}
sctp_ifnp->num_v6++;
if (new_ifn_af)
new_ifn_af = AF_INET6;
break;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
default:
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
new_ifn_af = 0;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
hash_of_addr = sctp_get_ifa_hash_val(&sctp_ifap->address.sa);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if ((sctp_ifap->src_is_priv == 0) &&
(sctp_ifap->src_is_loop == 0)) {
sctp_ifap->src_is_glob = 1;
}
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WLOCK();
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
hash_addr_head = &vrf->vrf_addr_hash[(hash_of_addr & vrf->vrf_addr_hashmark)];
LIST_INSERT_HEAD(hash_addr_head, sctp_ifap, next_bucket);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifap->refcount = 1;
LIST_INSERT_HEAD(&sctp_ifnp->ifalist, sctp_ifap, next_ifa);
sctp_ifnp->ifa_count++;
vrf->total_ifa_count++;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_add_int(&SCTP_BASE_INFO(ipi_count_ifas), 1);
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
if (new_ifn_af) {
SCTP_REGISTER_INTERFACE(ifn_index, new_ifn_af);
sctp_ifnp->registered_af = new_ifn_af;
}
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (dynamic_add) {
/*
* Bump up the refcount so that when the timer completes it
* will drop back down.
*/
struct sctp_laddr *wi;
atomic_add_int(&sctp_ifap->refcount, 1);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
wi = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_laddr), struct sctp_laddr);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (wi == NULL) {
/*
* Gak, what can we do? We have lost an address
* change can you say HOSED?
*/
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Lost an address change?\n");
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
/* Opps, must decrement the count */
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_del_addr_from_vrf(vrf_id, addr, ifn_index,
if_name);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
return (NULL);
}
SCTP_INCR_LADDR_COUNT();
bzero(wi, sizeof(*wi));
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
(void)SCTP_GETTIME_TIMEVAL(&wi->start_time);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
wi->ifa = sctp_ifap;
wi->action = SCTP_ADD_IP_ADDRESS;
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_LOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
LIST_INSERT_HEAD(&SCTP_BASE_INFO(addr_wq), wi, sctp_nxt_addr);
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_UNLOCK();
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_ADDR_WQ,
(struct sctp_inpcb *)NULL,
(struct sctp_tcb *)NULL,
(struct sctp_nets *)NULL);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
} else {
/* it's ready for use */
sctp_ifap->localifa_flags &= ~SCTP_ADDR_DEFER_USE;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (sctp_ifap);
}
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
void
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
sctp_del_addr_from_vrf(uint32_t vrf_id, struct sockaddr *addr,
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
uint32_t ifn_index, const char *if_name)
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
{
struct sctp_vrf *vrf;
struct sctp_ifa *sctp_ifap = NULL;
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WLOCK();
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
vrf = sctp_find_vrf(vrf_id);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (vrf == NULL) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Can't find vrf_id 0x%x\n", vrf_id);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
goto out_now;
}
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
#ifdef SCTP_DEBUG
SCTPDBG(SCTP_DEBUG_PCB4, "vrf_id 0x%x: deleting address:", vrf_id);
SCTPDBG_ADDR(SCTP_DEBUG_PCB4, addr);
#endif
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ifap = sctp_find_ifa_by_addr(addr, vrf->vrf_id, SCTP_ADDR_LOCKED);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifap) {
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/* Validate the delete */
if (sctp_ifap->ifn_p) {
int valid = 0;
/*-
* The name has priority over the ifn_index
* if its given. We do this especially for
* panda who might recycle indexes fast.
*/
if (if_name) {
Don't copy uninitialized memory. Also simplify the comparison of interface names. MFC after: 3 days.
2011-11-13 11:53:18 +00:00
if (strncmp(if_name, sctp_ifap->ifn_p->ifn_name, SCTP_IFNAMSIZ) == 0) {
/* They match its a correct delete */
valid = 1;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
}
if (!valid) {
/* last ditch check ifn_index */
if (ifn_index == sctp_ifap->ifn_p->ifn_index) {
valid = 1;
}
}
if (!valid) {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "ifn:%d ifname:%s does not match addresses\n",
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
ifn_index, ((if_name == NULL) ? "NULL" : if_name));
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "ifn:%d ifname:%s - ignoring delete\n",
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ifap->ifn_p->ifn_index, sctp_ifap->ifn_p->ifn_name);
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
return;
}
}
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Deleting ifa %p\n", (void *)sctp_ifap);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifap->localifa_flags &= SCTP_ADDR_VALID;
sctp_ifap->localifa_flags |= SCTP_BEING_DELETED;
vrf->total_ifa_count--;
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
LIST_REMOVE(sctp_ifap, next_bucket);
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
sctp_remove_ifa_from_ifn(sctp_ifap);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
}
#ifdef SCTP_DEBUG
else {
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Del Addr-ifn:%d Could not find address:",
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
ifn_index);
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG_ADDR(SCTP_DEBUG_PCB1, addr);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
#endif
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
out_now:
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
SCTP_IPI_ADDR_WUNLOCK();
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (sctp_ifap) {
struct sctp_laddr *wi;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
wi = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_laddr), struct sctp_laddr);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (wi == NULL) {
/*
* Gak, what can we do? We have lost an address
* change can you say HOSED?
*/
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
SCTPDBG(SCTP_DEBUG_PCB4, "Lost an address change?\n");
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
/* Oops, must decrement the count */
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
sctp_free_ifa(sctp_ifap);
return;
}
SCTP_INCR_LADDR_COUNT();
bzero(wi, sizeof(*wi));
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
(void)SCTP_GETTIME_TIMEVAL(&wi->start_time);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
wi->ifa = sctp_ifap;
wi->action = SCTP_DEL_IP_ADDRESS;
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_LOCK();
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
/*
* Should this really be a tailq? As it is we will process
* the newest first :-0
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
LIST_INSERT_HEAD(&SCTP_BASE_INFO(addr_wq), wi, sctp_nxt_addr);
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_UNLOCK();
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_ADDR_WQ,
(struct sctp_inpcb *)NULL,
(struct sctp_tcb *)NULL,
(struct sctp_nets *)NULL);
}
return;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
static struct sctp_tcb *
sctp_tcb_special_locate(struct sctp_inpcb **inp_p, struct sockaddr *from,
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
struct sockaddr *to, struct sctp_nets **netp, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- fix (global) address handling in the presence of duplicates, the last interface should own the address, but the current code fumbles the handoff. This fixes that. - move address related debugs to PCB4 and add additional ones to help in debugging address problems. Approved by: re@freebsd.org (K Smith)
2007-09-21 04:19:33 +00:00
/**** ASSUMES THE CALLER holds the INP_INFO_RLOCK */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* If we support the TCP model, then we must now dig through to see
* if we can find our endpoint in the list of tcp ep's.
*/
uint16_t lport, rport;
struct sctppcbhead *ephead;
struct sctp_inpcb *inp;
struct sctp_laddr *laddr;
struct sctp_tcb *stcb;
struct sctp_nets *net;
if ((to == NULL) || (from == NULL)) {
return (NULL);
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (to->sa_family) {
#ifdef INET
case AF_INET:
if (from->sa_family == AF_INET) {
lport = ((struct sockaddr_in *)to)->sin_port;
rport = ((struct sockaddr_in *)from)->sin_port;
} else {
return (NULL);
}
break;
#endif
#ifdef INET6
case AF_INET6:
if (from->sa_family == AF_INET6) {
lport = ((struct sockaddr_in6 *)to)->sin6_port;
rport = ((struct sockaddr_in6 *)from)->sin6_port;
} else {
return (NULL);
}
break;
#endif
default:
return (NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
ephead = &SCTP_BASE_INFO(sctp_tcpephash)[SCTP_PCBHASH_ALLADDR((lport | rport), SCTP_BASE_INFO(hashtcpmark))];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Ok now for each of the guys in this bucket we must look and see:
* - Does the remote port match. - Does there single association's
* addresses match this address (to). If so we update p_ep to point
* to this ep and return the tcb from it.
*/
LIST_FOREACH(inp, ephead, sctp_hash) {
SCTP_INP_RLOCK(inp);
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
SCTP_INP_RUNLOCK(inp);
continue;
}
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (lport != inp->sctp_lport) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
SCTP_INP_RUNLOCK(inp);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
continue;
}
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
if (inp->def_vrf_id != vrf_id) {
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
SCTP_INP_RUNLOCK(inp);
continue;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* check to see if the ep has one of the addresses */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) == 0) {
/* We are NOT bound all, so look further */
int match = 0;
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "%s: NULL ifa\n", __FUNCTION__);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa->localifa_flags & SCTP_BEING_DELETED) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "ifa being deleted\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa->address.sa.sa_family ==
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
to->sa_family) {
/* see if it matches */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (from->sa_family == AF_INET) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
struct sockaddr_in *intf_addr,
*sin;
intf_addr = &laddr->ifa->address.sin;
sin = (struct sockaddr_in *)to;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (sin->sin_addr.s_addr ==
intf_addr->sin_addr.s_addr) {
match = 1;
break;
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
if (from->sa_family == AF_INET6) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sockaddr_in6 *intf_addr6;
struct sockaddr_in6 *sin6;
sin6 = (struct sockaddr_in6 *)
to;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
intf_addr6 = &laddr->ifa->address.sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
if (SCTP6_ARE_ADDR_EQUAL(sin6,
intf_addr6)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
match = 1;
break;
}
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
if (match == 0) {
/* This endpoint does not have this address */
SCTP_INP_RUNLOCK(inp);
continue;
}
}
/*
* Ok if we hit here the ep has the address, does it hold
* the tcb?
*/
stcb = LIST_FIRST(&inp->sctp_asoc_list);
if (stcb == NULL) {
SCTP_INP_RUNLOCK(inp);
continue;
}
SCTP_TCB_LOCK(stcb);
if (stcb->rport != rport) {
/* remote port does not match. */
SCTP_TCB_UNLOCK(stcb);
SCTP_INP_RUNLOCK(inp);
continue;
}
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
if (stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
SCTP_TCB_UNLOCK(stcb);
SCTP_INP_RUNLOCK(inp);
continue;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Does this TCB have a matching address? */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
if (net->ro._l_addr.sa.sa_family != from->sa_family) {
/* not the same family, can't be a match */
continue;
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (from->sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
{
struct sockaddr_in *sin, *rsin;
sin = (struct sockaddr_in *)&net->ro._l_addr;
rsin = (struct sockaddr_in *)from;
if (sin->sin_addr.s_addr ==
rsin->sin_addr.s_addr) {
/* found it */
if (netp != NULL) {
*netp = net;
}
/*
* Update the endpoint
* pointer
*/
*inp_p = inp;
SCTP_INP_RUNLOCK(inp);
return (stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
{
struct sockaddr_in6 *sin6, *rsin6;
sin6 = (struct sockaddr_in6 *)&net->ro._l_addr;
rsin6 = (struct sockaddr_in6 *)from;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
if (SCTP6_ARE_ADDR_EQUAL(sin6,
rsin6)) {
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
/* found it */
if (netp != NULL) {
*netp = net;
}
/*
* Update the endpoint
* pointer
*/
*inp_p = inp;
SCTP_INP_RUNLOCK(inp);
return (stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
default:
/* TSNH */
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
SCTP_TCB_UNLOCK(stcb);
SCTP_INP_RUNLOCK(inp);
}
return (NULL);
}
* Implement sctp_does_stcb_own_this_addr() correclty. It was taking the wrong side into account. * sctp_findassociation_ep_addr() must check the local address if available. This fixes a bug where ABORT chunks were accepted even in the case where the local was not owned by the endpoint. Thanks to brucec for pointing out a bug in my first version of the fix. MFC after: 3 days
2010-06-23 15:19:07 +00:00
static int
sctp_does_stcb_own_this_addr(struct sctp_tcb *stcb, struct sockaddr *to)
{
int loopback_scope, ipv4_local_scope, local_scope, site_scope;
int ipv4_addr_legal, ipv6_addr_legal;
struct sctp_vrf *vrf;
struct sctp_ifn *sctp_ifn;
struct sctp_ifa *sctp_ifa;
loopback_scope = stcb->asoc.loopback_scope;
ipv4_local_scope = stcb->asoc.ipv4_local_scope;
local_scope = stcb->asoc.local_scope;
site_scope = stcb->asoc.site_scope;
ipv4_addr_legal = ipv6_addr_legal = 0;
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) {
ipv6_addr_legal = 1;
if (SCTP_IPV6_V6ONLY(stcb->sctp_ep) == 0) {
ipv4_addr_legal = 1;
}
} else {
ipv4_addr_legal = 1;
}
SCTP_IPI_ADDR_RLOCK();
vrf = sctp_find_vrf(stcb->asoc.vrf_id);
if (vrf == NULL) {
/* no vrf, no addresses */
SCTP_IPI_ADDR_RUNLOCK();
return (0);
}
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) {
LIST_FOREACH(sctp_ifn, &vrf->ifnlist, next_ifn) {
if ((loopback_scope == 0) &&
SCTP_IFN_IS_IFT_LOOP(sctp_ifn)) {
continue;
}
LIST_FOREACH(sctp_ifa, &sctp_ifn->ifalist, next_ifa) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (sctp_is_addr_restricted(stcb, sctp_ifa) &&
(!sctp_is_addr_pending(stcb, sctp_ifa))) {
/*
* We allow pending addresses, where
* we have sent an asconf-add to be
* considered valid.
*/
* Implement sctp_does_stcb_own_this_addr() correclty. It was taking the wrong side into account. * sctp_findassociation_ep_addr() must check the local address if available. This fixes a bug where ABORT chunks were accepted even in the case where the local was not owned by the endpoint. Thanks to brucec for pointing out a bug in my first version of the fix. MFC after: 3 days
2010-06-23 15:19:07 +00:00
continue;
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
}
* Implement sctp_does_stcb_own_this_addr() correclty. It was taking the wrong side into account. * sctp_findassociation_ep_addr() must check the local address if available. This fixes a bug where ABORT chunks were accepted even in the case where the local was not owned by the endpoint. Thanks to brucec for pointing out a bug in my first version of the fix. MFC after: 3 days
2010-06-23 15:19:07 +00:00
switch (sctp_ifa->address.sa.sa_family) {
#ifdef INET
case AF_INET:
if (ipv4_addr_legal) {
struct sockaddr_in *sin,
*rsin;
sin = &sctp_ifa->address.sin;
rsin = (struct sockaddr_in *)to;
if ((ipv4_local_scope == 0) &&
IN4_ISPRIVATE_ADDRESS(&sin->sin_addr)) {
continue;
}
if (sin->sin_addr.s_addr == rsin->sin_addr.s_addr) {
SCTP_IPI_ADDR_RUNLOCK();
return (1);
}
}
break;
#endif
#ifdef INET6
case AF_INET6:
if (ipv6_addr_legal) {
struct sockaddr_in6 *sin6,
*rsin6;
sin6 = &sctp_ifa->address.sin6;
rsin6 = (struct sockaddr_in6 *)to;
if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr)) {
if (local_scope == 0)
continue;
if (sin6->sin6_scope_id == 0) {
if (sa6_recoverscope(sin6) != 0)
continue;
}
}
if ((site_scope == 0) &&
(IN6_IS_ADDR_SITELOCAL(&sin6->sin6_addr))) {
continue;
}
if (SCTP6_ARE_ADDR_EQUAL(sin6, rsin6)) {
SCTP_IPI_ADDR_RUNLOCK();
return (1);
}
}
break;
#endif
default:
/* TSNH */
break;
}
}
}
} else {
struct sctp_laddr *laddr;
LIST_FOREACH(laddr, &stcb->sctp_ep->sctp_addr_list, sctp_nxt_addr) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (sctp_is_addr_restricted(stcb, laddr->ifa) &&
(!sctp_is_addr_pending(stcb, laddr->ifa))) {
/*
* We allow pending addresses, where we have
* sent an asconf-add to be considered
* valid.
*/
* Implement sctp_does_stcb_own_this_addr() correclty. It was taking the wrong side into account. * sctp_findassociation_ep_addr() must check the local address if available. This fixes a bug where ABORT chunks were accepted even in the case where the local was not owned by the endpoint. Thanks to brucec for pointing out a bug in my first version of the fix. MFC after: 3 days
2010-06-23 15:19:07 +00:00
continue;
}
if (laddr->ifa->address.sa.sa_family != to->sa_family) {
continue;
}
switch (to->sa_family) {
#ifdef INET
case AF_INET:
{
struct sockaddr_in *sin, *rsin;
sin = (struct sockaddr_in *)&laddr->ifa->address.sin;
rsin = (struct sockaddr_in *)to;
if (sin->sin_addr.s_addr == rsin->sin_addr.s_addr) {
SCTP_IPI_ADDR_RUNLOCK();
return (1);
}
break;
}
#endif
#ifdef INET6
case AF_INET6:
{
struct sockaddr_in6 *sin6, *rsin6;
sin6 = (struct sockaddr_in6 *)&laddr->ifa->address.sin6;
rsin6 = (struct sockaddr_in6 *)to;
if (SCTP6_ARE_ADDR_EQUAL(sin6, rsin6)) {
SCTP_IPI_ADDR_RUNLOCK();
return (1);
}
break;
}
#endif
default:
/* TSNH */
break;
}
}
}
SCTP_IPI_ADDR_RUNLOCK();
return (0);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* rules for use
*
* 1) If I return a NULL you must decrement any INP ref cnt. 2) If I find an
* stcb, both will be locked (locked_tcb and stcb) but decrement will be done
* (if locked == NULL). 3) Decrement happens on return ONLY if locked ==
* NULL.
*/
struct sctp_tcb *
sctp_findassociation_ep_addr(struct sctp_inpcb **inp_p, struct sockaddr *remote,
struct sctp_nets **netp, struct sockaddr *local, struct sctp_tcb *locked_tcb)
{
struct sctpasochead *head;
struct sctp_inpcb *inp;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
struct sctp_tcb *stcb = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_nets *net;
uint16_t rport;
inp = *inp_p;
Use case for selecting the address family (as in other places). MFC after: 3 days
2012-07-14 20:08:03 +00:00
switch (remote->sa_family) {
#ifdef INET
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
rport = (((struct sockaddr_in *)remote)->sin_port);
Use case for selecting the address family (as in other places). MFC after: 3 days
2012-07-14 20:08:03 +00:00
break;
#endif
#ifdef INET6
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
rport = (((struct sockaddr_in6 *)remote)->sin6_port);
Use case for selecting the address family (as in other places). MFC after: 3 days
2012-07-14 20:08:03 +00:00
break;
#endif
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (NULL);
}
if (locked_tcb) {
/*
* UN-lock so we can do proper locking here this occurs when
* called from load_addresses_from_init.
*/
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
atomic_add_int(&locked_tcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_TCB_UNLOCK(locked_tcb);
}
SCTP_INP_INFO_RLOCK();
Find the endpoint for an incoming packet also if the endpoint comes from sctp_peeloff(). MFC after: 3 days
2012-11-26 16:43:32 +00:00
if ((inp->sctp_flags & SCTP_PCB_FLAGS_TCPTYPE) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_IN_TCPPOOL)) {
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Now either this guy is our listener or it's the
* connector. If it is the one that issued the connect, then
* it's only chance is to be the first TCB in the list. If
* it is the acceptor, then do the special_lookup to hash
* and find the real inp.
*/
if ((inp->sctp_socket) && (inp->sctp_socket->so_qlimit)) {
/* to is peer addr, from is my addr */
stcb = sctp_tcb_special_locate(inp_p, remote, local,
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
netp, inp->def_vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((stcb != NULL) && (locked_tcb == NULL)) {
/* we have a locked tcb, lower refcount */
SCTP_INP_DECR_REF(inp);
}
if ((locked_tcb != NULL) && (locked_tcb != stcb)) {
SCTP_INP_RLOCK(locked_tcb->sctp_ep);
SCTP_TCB_LOCK(locked_tcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
atomic_subtract_int(&locked_tcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_RUNLOCK(locked_tcb->sctp_ep);
}
SCTP_INP_INFO_RUNLOCK();
return (stcb);
} else {
SCTP_INP_WLOCK(inp);
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
goto null_return;
}
stcb = LIST_FIRST(&inp->sctp_asoc_list);
if (stcb == NULL) {
goto null_return;
}
SCTP_TCB_LOCK(stcb);
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->rport != rport) {
/* remote port does not match. */
SCTP_TCB_UNLOCK(stcb);
goto null_return;
}
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
if (stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
SCTP_TCB_UNLOCK(stcb);
goto null_return;
}
Fix a bug I introduced in r209470. MFC after: 3 days
2010-06-24 07:43:25 +00:00
if (local && !sctp_does_stcb_own_this_addr(stcb, local)) {
* Implement sctp_does_stcb_own_this_addr() correclty. It was taking the wrong side into account. * sctp_findassociation_ep_addr() must check the local address if available. This fixes a bug where ABORT chunks were accepted even in the case where the local was not owned by the endpoint. Thanks to brucec for pointing out a bug in my first version of the fix. MFC after: 3 days
2010-06-23 15:19:07 +00:00
SCTP_TCB_UNLOCK(stcb);
goto null_return;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* now look at the list of remote addresses */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef INVARIANTS
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (net == (TAILQ_NEXT(net, sctp_next))) {
panic("Corrupt net list");
}
#endif
if (net->ro._l_addr.sa.sa_family !=
remote->sa_family) {
/* not the same family */
continue;
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (remote->sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
{
struct sockaddr_in *sin,
*rsin;
sin = (struct sockaddr_in *)
&net->ro._l_addr;
rsin = (struct sockaddr_in *)remote;
if (sin->sin_addr.s_addr ==
rsin->sin_addr.s_addr) {
/* found it */
if (netp != NULL) {
*netp = net;
}
if (locked_tcb == NULL) {
SCTP_INP_DECR_REF(inp);
} else if (locked_tcb != stcb) {
SCTP_TCB_LOCK(locked_tcb);
}
if (locked_tcb) {
atomic_subtract_int(&locked_tcb->asoc.refcnt, 1);
}
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_RUNLOCK();
return (stcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
{
struct sockaddr_in6 *sin6,
*rsin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
sin6 = (struct sockaddr_in6 *)&net->ro._l_addr;
rsin6 = (struct sockaddr_in6 *)remote;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
if (SCTP6_ARE_ADDR_EQUAL(sin6,
rsin6)) {
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
/* found it */
if (netp != NULL) {
*netp = net;
}
if (locked_tcb == NULL) {
SCTP_INP_DECR_REF(inp);
} else if (locked_tcb != stcb) {
SCTP_TCB_LOCK(locked_tcb);
}
if (locked_tcb) {
atomic_subtract_int(&locked_tcb->asoc.refcnt, 1);
}
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_RUNLOCK();
return (stcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
default:
/* TSNH */
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
SCTP_TCB_UNLOCK(stcb);
}
} else {
SCTP_INP_WLOCK(inp);
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
goto null_return;
}
head = &inp->sctp_tcbhash[SCTP_PCBHASH_ALLADDR(rport,
inp->sctp_hashmark)];
if (head == NULL) {
goto null_return;
}
LIST_FOREACH(stcb, head, sctp_tcbhash) {
if (stcb->rport != rport) {
/* remote port does not match */
continue;
}
SCTP_TCB_LOCK(stcb);
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
if (stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
SCTP_TCB_UNLOCK(stcb);
continue;
}
Fix a bug I introduced in r209470. MFC after: 3 days
2010-06-24 07:43:25 +00:00
if (local && !sctp_does_stcb_own_this_addr(stcb, local)) {
* Implement sctp_does_stcb_own_this_addr() correclty. It was taking the wrong side into account. * sctp_findassociation_ep_addr() must check the local address if available. This fixes a bug where ABORT chunks were accepted even in the case where the local was not owned by the endpoint. Thanks to brucec for pointing out a bug in my first version of the fix. MFC after: 3 days
2010-06-23 15:19:07 +00:00
SCTP_TCB_UNLOCK(stcb);
continue;
}
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
/* now look at the list of remote addresses */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef INVARIANTS
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (net == (TAILQ_NEXT(net, sctp_next))) {
panic("Corrupt net list");
}
#endif
if (net->ro._l_addr.sa.sa_family !=
remote->sa_family) {
/* not the same family */
continue;
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (remote->sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
{
struct sockaddr_in *sin,
*rsin;
sin = (struct sockaddr_in *)
&net->ro._l_addr;
rsin = (struct sockaddr_in *)remote;
if (sin->sin_addr.s_addr ==
rsin->sin_addr.s_addr) {
/* found it */
if (netp != NULL) {
*netp = net;
}
if (locked_tcb == NULL) {
SCTP_INP_DECR_REF(inp);
} else if (locked_tcb != stcb) {
SCTP_TCB_LOCK(locked_tcb);
}
if (locked_tcb) {
atomic_subtract_int(&locked_tcb->asoc.refcnt, 1);
}
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_RUNLOCK();
return (stcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
{
struct sockaddr_in6 *sin6,
*rsin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
sin6 = (struct sockaddr_in6 *)
&net->ro._l_addr;
rsin6 = (struct sockaddr_in6 *)remote;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
if (SCTP6_ARE_ADDR_EQUAL(sin6,
rsin6)) {
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
/* found it */
if (netp != NULL) {
*netp = net;
}
if (locked_tcb == NULL) {
SCTP_INP_DECR_REF(inp);
} else if (locked_tcb != stcb) {
SCTP_TCB_LOCK(locked_tcb);
}
if (locked_tcb) {
atomic_subtract_int(&locked_tcb->asoc.refcnt, 1);
}
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_RUNLOCK();
return (stcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
default:
/* TSNH */
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
SCTP_TCB_UNLOCK(stcb);
}
}
null_return:
/* clean up for returning null */
if (locked_tcb) {
SCTP_TCB_LOCK(locked_tcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
atomic_subtract_int(&locked_tcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_RUNLOCK();
/* not found */
return (NULL);
}
/*
* Find an association for a specific endpoint using the association id given
* out in the COMM_UP notification
*/
struct sctp_tcb *
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_findasoc_ep_asocid_locked(struct sctp_inpcb *inp, sctp_assoc_t asoc_id, int want_lock)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* Use my the assoc_id to find a endpoint
*/
struct sctpasochead *head;
struct sctp_tcb *stcb;
uint32_t id;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (inp == NULL) {
SCTP_PRINTF("TSNH ep_associd\n");
return (NULL);
}
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
SCTP_PRINTF("TSNH ep_associd0\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (NULL);
}
id = (uint32_t) asoc_id;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
head = &inp->sctp_asocidhash[SCTP_PCBHASH_ASOC(id, inp->hashasocidmark)];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (head == NULL) {
/* invalid id TSNH */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
SCTP_PRINTF("TSNH ep_associd1\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (NULL);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
LIST_FOREACH(stcb, head, sctp_tcbasocidhash) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.assoc_id == id) {
if (inp != stcb->sctp_ep) {
/*
* some other guy has the same id active (id
* collision ??).
*/
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
SCTP_PRINTF("TSNH ep_associd2\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
if (stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
continue;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (want_lock) {
SCTP_TCB_LOCK(stcb);
}
return (stcb);
}
}
return (NULL);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctp_tcb *
sctp_findassociation_ep_asocid(struct sctp_inpcb *inp, sctp_assoc_t asoc_id, int want_lock)
{
struct sctp_tcb *stcb;
SCTP_INP_RLOCK(inp);
stcb = sctp_findasoc_ep_asocid_locked(inp, asoc_id, want_lock);
SCTP_INP_RUNLOCK(inp);
return (stcb);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
static struct sctp_inpcb *
sctp_endpoint_probe(struct sockaddr *nam, struct sctppcbhead *head,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint16_t lport, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_inpcb *inp;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
struct sctp_laddr *laddr;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
struct sockaddr_in *sin;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
#ifdef INET6
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
struct sockaddr_in6 *sin6;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
struct sockaddr_in6 *intf_addr6;
#endif
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
int fnd;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* Endpoint probe expects that the INP_INFO is locked.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
sin = NULL;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
sin6 = NULL;
#endif
switch (nam->sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin = (struct sockaddr_in *)nam;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin6 = (struct sockaddr_in6 *)nam;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
#endif
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* unsupported family */
return (NULL);
}
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (head == NULL)
return (NULL);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_FOREACH(inp, head, sctp_hash) {
SCTP_INP_RLOCK(inp);
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
SCTP_INP_RUNLOCK(inp);
continue;
}
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) &&
(inp->sctp_lport == lport)) {
/* got it */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((nam->sa_family == AF_INET) &&
(inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
SCTP_IPV6_V6ONLY(inp)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* IPv4 on a IPv6 socket with ONLY IPv6 set */
SCTP_INP_RUNLOCK(inp);
continue;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
#ifdef INET6
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* A V6 address and the endpoint is NOT bound V6 */
if (nam->sa_family == AF_INET6 &&
(inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) == 0) {
SCTP_INP_RUNLOCK(inp);
continue;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* does a VRF id match? */
fnd = 0;
if (inp->def_vrf_id == vrf_id)
fnd = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_RUNLOCK(inp);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (!fnd)
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (inp);
}
SCTP_INP_RUNLOCK(inp);
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (nam->sa_family) {
#ifdef INET
case AF_INET:
if (sin->sin_addr.s_addr == INADDR_ANY) {
/* Can't hunt for one that has no address specified */
return (NULL);
}
break;
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET6:
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/* Can't hunt for one that has no address specified */
return (NULL);
}
break;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
default:
break;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* ok, not bound to all so see if we can find a EP bound to this
* address.
*/
LIST_FOREACH(inp, head, sctp_hash) {
SCTP_INP_RLOCK(inp);
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
SCTP_INP_RUNLOCK(inp);
continue;
}
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL)) {
SCTP_INP_RUNLOCK(inp);
continue;
}
/*
* Ok this could be a likely candidate, look at all of its
* addresses
*/
if (inp->sctp_lport != lport) {
SCTP_INP_RUNLOCK(inp);
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* does a VRF id match? */
fnd = 0;
if (inp->def_vrf_id == vrf_id)
fnd = 1;
if (!fnd) {
SCTP_INP_RUNLOCK(inp);
continue;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "%s: NULL ifa\n",
__FUNCTION__);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Ok laddr->ifa:%p is possible, ",
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
(void *)laddr->ifa);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa->localifa_flags & SCTP_BEING_DELETED) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Huh IFA being deleted\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa->address.sa.sa_family == nam->sa_family) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* possible, see if it matches */
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (nam->sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (sin->sin_addr.s_addr ==
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
laddr->ifa->address.sin.sin_addr.s_addr) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_RUNLOCK(inp);
return (inp);
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
intf_addr6 = &laddr->ifa->address.sin6;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
if (SCTP6_ARE_ADDR_EQUAL(sin6,
intf_addr6)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_RUNLOCK(inp);
return (inp);
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
break;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
SCTP_INP_RUNLOCK(inp);
}
return (NULL);
}
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
static struct sctp_inpcb *
sctp_isport_inuse(struct sctp_inpcb *inp, uint16_t lport, uint32_t vrf_id)
{
struct sctppcbhead *head;
struct sctp_inpcb *t_inp;
int fnd;
head = &SCTP_BASE_INFO(sctp_ephash)[SCTP_PCBHASH_ALLADDR(lport,
SCTP_BASE_INFO(hashmark))];
LIST_FOREACH(t_inp, head, sctp_hash) {
if (t_inp->sctp_lport != lport) {
continue;
}
/* is it in the VRF in question */
fnd = 0;
if (t_inp->def_vrf_id == vrf_id)
fnd = 1;
if (!fnd)
continue;
/* This one is in use. */
/* check the v6/v4 binding issue */
if ((t_inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
SCTP_IPV6_V6ONLY(t_inp)) {
if (inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) {
/* collision in V6 space */
return (t_inp);
} else {
/* inp is BOUND_V4 no conflict */
continue;
}
} else if (t_inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) {
/* t_inp is bound v4 and v6, conflict always */
return (t_inp);
} else {
/* t_inp is bound only V4 */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
SCTP_IPV6_V6ONLY(inp)) {
/* no conflict */
continue;
}
/* else fall through to conflict */
}
return (t_inp);
}
return (NULL);
}
int
sctp_swap_inpcb_for_listen(struct sctp_inpcb *inp)
{
/* For 1-2-1 with port reuse */
struct sctppcbhead *head;
struct sctp_inpcb *tinp;
if (sctp_is_feature_off(inp, SCTP_PCB_FLAGS_PORTREUSE)) {
/* only works with port reuse on */
return (-1);
}
if ((inp->sctp_flags & SCTP_PCB_FLAGS_IN_TCPPOOL) == 0) {
return (0);
}
SCTP_INP_RUNLOCK(inp);
head = &SCTP_BASE_INFO(sctp_ephash)[SCTP_PCBHASH_ALLADDR(inp->sctp_lport,
SCTP_BASE_INFO(hashmark))];
/* Kick out all non-listeners to the TCP hash */
LIST_FOREACH(tinp, head, sctp_hash) {
if (tinp->sctp_lport != inp->sctp_lport) {
continue;
}
if (tinp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
continue;
}
if (tinp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE) {
continue;
}
if (tinp->sctp_socket->so_qlimit) {
continue;
}
SCTP_INP_WLOCK(tinp);
LIST_REMOVE(tinp, sctp_hash);
head = &SCTP_BASE_INFO(sctp_tcpephash)[SCTP_PCBHASH_ALLADDR(tinp->sctp_lport, SCTP_BASE_INFO(hashtcpmark))];
tinp->sctp_flags |= SCTP_PCB_FLAGS_IN_TCPPOOL;
LIST_INSERT_HEAD(head, tinp, sctp_hash);
SCTP_INP_WUNLOCK(tinp);
}
SCTP_INP_WLOCK(inp);
/* Pull from where he was */
LIST_REMOVE(inp, sctp_hash);
inp->sctp_flags &= ~SCTP_PCB_FLAGS_IN_TCPPOOL;
head = &SCTP_BASE_INFO(sctp_ephash)[SCTP_PCBHASH_ALLADDR(inp->sctp_lport, SCTP_BASE_INFO(hashmark))];
LIST_INSERT_HEAD(head, inp, sctp_hash);
SCTP_INP_WUNLOCK(inp);
SCTP_INP_RLOCK(inp);
return (0);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_inpcb *
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
sctp_pcb_findep(struct sockaddr *nam, int find_tcp_pool, int have_lock,
uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* First we check the hash table to see if someone has this port
* bound with just the port.
*/
struct sctp_inpcb *inp;
struct sctppcbhead *head;
int lport;
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
unsigned int i;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
struct sockaddr_in *sin;
#endif
#ifdef INET6
struct sockaddr_in6 *sin6;
#endif
switch (nam->sa_family) {
#ifdef INET
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin = (struct sockaddr_in *)nam;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
lport = sin->sin_port;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET6
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin6 = (struct sockaddr_in6 *)nam;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
lport = sin6->sin6_port;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (NULL);
}
/*
* I could cheat here and just cast to one of the types but we will
* do it right. It also provides the check against an Unsupported
* type too.
*/
/* Find the head of the ALLADDR chain */
if (have_lock == 0) {
SCTP_INP_INFO_RLOCK();
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
head = &SCTP_BASE_INFO(sctp_ephash)[SCTP_PCBHASH_ALLADDR(lport,
SCTP_BASE_INFO(hashmark))];
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
inp = sctp_endpoint_probe(nam, head, lport, vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* If the TCP model exists it could be that the main listening
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
* endpoint is gone but there still exists a connected socket for
* this guy. If so we can return the first one that we find. This
* may NOT be the correct one so the caller should be wary on the
* returned INP. Currently the only caller that sets find_tcp_pool
* is in bindx where we are verifying that a user CAN bind the
* address. He either has bound it already, or someone else has, or
* its open to bind, so this is good enough.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
if (inp == NULL && find_tcp_pool) {
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
for (i = 0; i < SCTP_BASE_INFO(hashtcpmark) + 1; i++) {
head = &SCTP_BASE_INFO(sctp_tcpephash)[i];
inp = sctp_endpoint_probe(nam, head, lport, vrf_id);
if (inp) {
break;
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (inp) {
SCTP_INP_INCR_REF(inp);
}
if (have_lock == 0) {
SCTP_INP_INFO_RUNLOCK();
}
return (inp);
}
/*
* Find an association for an endpoint with the pointer to whom you want to
* send to and the endpoint pointer. The address can be IPv4 or IPv6. We may
* need to change the *to to some other struct like a mbuf...
*/
struct sctp_tcb *
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
sctp_findassociation_addr_sa(struct sockaddr *from, struct sockaddr *to,
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
struct sctp_inpcb **inp_p, struct sctp_nets **netp, int find_tcp_pool,
uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
struct sctp_inpcb *inp = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tcb *retval;
SCTP_INP_INFO_RLOCK();
if (find_tcp_pool) {
if (inp_p != NULL) {
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
retval = sctp_tcb_special_locate(inp_p, from, to, netp,
vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
retval = sctp_tcb_special_locate(&inp, from, to, netp,
vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (retval != NULL) {
SCTP_INP_INFO_RUNLOCK();
return (retval);
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
inp = sctp_pcb_findep(to, 0, 1, vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (inp_p != NULL) {
*inp_p = inp;
}
SCTP_INP_INFO_RUNLOCK();
if (inp == NULL) {
return (NULL);
}
/*
* ok, we have an endpoint, now lets find the assoc for it (if any)
* we now place the source address or from in the to of the find
* endpoint call. Since in reality this chain is used from the
* inbound packet side.
*/
if (inp_p != NULL) {
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
retval = sctp_findassociation_ep_addr(inp_p, from, netp, to,
NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
retval = sctp_findassociation_ep_addr(&inp, from, netp, to,
NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
return retval;
}
/*
* This routine will grub through the mbuf that is a INIT or INIT-ACK and
* find all addresses that the sender has specified in any address list. Each
* address will be used to lookup the TCB and see if one exits.
*/
static struct sctp_tcb *
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_findassociation_special_addr(struct mbuf *m, int offset,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctphdr *sh, struct sctp_inpcb **inp_p, struct sctp_nets **netp,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
struct sockaddr *dst)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_paramhdr *phdr, parm_buf;
struct sctp_tcb *retval;
uint32_t ptype, plen;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
struct sockaddr_in sin4;
#endif
#ifdef INET6
struct sockaddr_in6 sin6;
#endif
#ifdef INET
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
memset(&sin4, 0, sizeof(sin4));
sin4.sin_len = sizeof(sin4);
sin4.sin_family = AF_INET;
sin4.sin_port = sh->src_port;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
#ifdef INET6
memset(&sin6, 0, sizeof(sin6));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin6.sin6_len = sizeof(sin6);
sin6.sin6_family = AF_INET6;
sin6.sin6_port = sh->src_port;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
retval = NULL;
offset += sizeof(struct sctp_init_chunk);
phdr = sctp_get_next_param(m, offset, &parm_buf, sizeof(parm_buf));
while (phdr != NULL) {
/* now we must see if we want the parameter */
ptype = ntohs(phdr->param_type);
plen = ntohs(phdr->param_length);
if (plen == 0) {
break;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ptype == SCTP_IPV4_ADDRESS &&
plen == sizeof(struct sctp_ipv4addr_param)) {
/* Get the rest of the address */
struct sctp_ipv4addr_param ip4_parm, *p4;
phdr = sctp_get_next_param(m, offset,
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
(struct sctp_paramhdr *)&ip4_parm, min(plen, sizeof(ip4_parm)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL) {
return (NULL);
}
p4 = (struct sctp_ipv4addr_param *)phdr;
memcpy(&sin4.sin_addr, &p4->addr, sizeof(p4->addr));
/* look it up */
retval = sctp_findassociation_ep_addr(inp_p,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
(struct sockaddr *)&sin4, netp, dst, NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (retval != NULL) {
return (retval);
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
}
#endif
#ifdef INET6
if (ptype == SCTP_IPV6_ADDRESS &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
plen == sizeof(struct sctp_ipv6addr_param)) {
/* Get the rest of the address */
struct sctp_ipv6addr_param ip6_parm, *p6;
phdr = sctp_get_next_param(m, offset,
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
(struct sctp_paramhdr *)&ip6_parm, min(plen, sizeof(ip6_parm)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL) {
return (NULL);
}
p6 = (struct sctp_ipv6addr_param *)phdr;
memcpy(&sin6.sin6_addr, &p6->addr, sizeof(p6->addr));
/* look it up */
retval = sctp_findassociation_ep_addr(inp_p,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
(struct sockaddr *)&sin6, netp, dst, NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (retval != NULL) {
return (retval);
}
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
offset += SCTP_SIZE32(plen);
phdr = sctp_get_next_param(m, offset, &parm_buf,
sizeof(parm_buf));
}
return (NULL);
}
static struct sctp_tcb *
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_findassoc_by_vtag(struct sockaddr *from, struct sockaddr *to, uint32_t vtag,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_inpcb **inp_p, struct sctp_nets **netp, uint16_t rport,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
uint16_t lport, int skip_src_check, uint32_t vrf_id, uint32_t remote_tag)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* Use my vtag to hash. If we find it we then verify the source addr
* is in the assoc. If all goes well we save a bit on rec of a
* packet.
*/
struct sctpasochead *head;
struct sctp_nets *net;
struct sctp_tcb *stcb;
SCTP_INP_INFO_RLOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
head = &SCTP_BASE_INFO(sctp_asochash)[SCTP_PCBHASH_ASOC(vtag,
SCTP_BASE_INFO(hashasocmark))];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (head == NULL) {
/* invalid vtag */
SCTP_INP_INFO_RUNLOCK();
return (NULL);
}
LIST_FOREACH(stcb, head, sctp_asocs) {
SCTP_INP_RLOCK(stcb->sctp_ep);
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
SCTP_INP_RUNLOCK(stcb->sctp_ep);
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
if (stcb->sctp_ep->def_vrf_id != vrf_id) {
SCTP_INP_RUNLOCK(stcb->sctp_ep);
continue;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_TCB_LOCK(stcb);
SCTP_INP_RUNLOCK(stcb->sctp_ep);
if (stcb->asoc.my_vtag == vtag) {
/* candidate */
if (stcb->rport != rport) {
SCTP_TCB_UNLOCK(stcb);
continue;
}
if (stcb->sctp_ep->sctp_lport != lport) {
SCTP_TCB_UNLOCK(stcb);
continue;
}
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
if (stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
SCTP_TCB_UNLOCK(stcb);
continue;
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* RRS:Need toaddr check here */
if (sctp_does_stcb_own_this_addr(stcb, to) == 0) {
/* Endpoint does not own this address */
SCTP_TCB_UNLOCK(stcb);
continue;
}
if (remote_tag) {
/*
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* If we have both vtags that's all we match
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
* on
*/
if (stcb->asoc.peer_vtag == remote_tag) {
/*
* If both tags match we consider it
* conclusive and check NO
* source/destination addresses
*/
goto conclusive;
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (skip_src_check) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
conclusive:
if (from) {
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
*netp = sctp_findnet(stcb, from);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
} else {
*netp = NULL; /* unknown */
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (inp_p)
*inp_p = stcb->sctp_ep;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_RUNLOCK();
return (stcb);
}
net = sctp_findnet(stcb, from);
if (net) {
/* yep its him. */
*netp = net;
SCTP_STAT_INCR(sctps_vtagexpress);
*inp_p = stcb->sctp_ep;
SCTP_INP_INFO_RUNLOCK();
return (stcb);
} else {
/*
* not him, this should only happen in rare
* cases so I peg it.
*/
SCTP_STAT_INCR(sctps_vtagbogus);
}
}
SCTP_TCB_UNLOCK(stcb);
}
SCTP_INP_INFO_RUNLOCK();
return (NULL);
}
/*
* Find an association with the pointer to the inbound IP packet. This can be
* a IPv4 or IPv6 packet.
*/
struct sctp_tcb *
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_findassociation_addr(struct mbuf *m, int offset,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
struct sockaddr *src, struct sockaddr *dst,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctphdr *sh, struct sctp_chunkhdr *ch,
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
struct sctp_inpcb **inp_p, struct sctp_nets **netp, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
int find_tcp_pool;
struct sctp_tcb *retval;
struct sctp_inpcb *inp;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (sh->v_tag) {
/* we only go down this path if vtag is non-zero */
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
retval = sctp_findassoc_by_vtag(src, dst, ntohl(sh->v_tag),
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
inp_p, netp, sh->src_port, sh->dest_port, 0, vrf_id, 0);
if (retval) {
return (retval);
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
find_tcp_pool = 0;
if ((ch->chunk_type != SCTP_INITIATION) &&
(ch->chunk_type != SCTP_INITIATION_ACK) &&
(ch->chunk_type != SCTP_COOKIE_ACK) &&
(ch->chunk_type != SCTP_COOKIE_ECHO)) {
/* Other chunk types go to the tcp pool. */
find_tcp_pool = 1;
}
if (inp_p) {
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
retval = sctp_findassociation_addr_sa(src, dst, inp_p, netp,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
find_tcp_pool, vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp = *inp_p;
} else {
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
retval = sctp_findassociation_addr_sa(src, dst, &inp, netp,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
find_tcp_pool, vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "retval:%p inp:%p\n", (void *)retval, (void *)inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (retval == NULL && inp) {
/* Found a EP but not this address */
if ((ch->chunk_type == SCTP_INITIATION) ||
(ch->chunk_type == SCTP_INITIATION_ACK)) {
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* special hook, we do NOT return linp or an
* association that is linked to an existing
* association that is under the TCP pool (i.e. no
* listener exists). The endpoint finding routine
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* will always find a listener before examining the
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* TCP pool.
*/
if (inp->sctp_flags & SCTP_PCB_FLAGS_IN_TCPPOOL) {
if (inp_p) {
*inp_p = NULL;
}
return (NULL);
}
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
retval = sctp_findassociation_special_addr(m,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
offset, sh, &inp, netp, dst);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (inp_p != NULL) {
*inp_p = inp;
}
}
}
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "retval is %p\n", (void *)retval);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (retval);
}
/*
* lookup an association by an ASCONF lookup address.
* if the lookup address is 0.0.0.0 or ::0, use the vtag to do the lookup
*/
struct sctp_tcb *
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_findassociation_ep_asconf(struct mbuf *m, int offset,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
struct sockaddr *dst, struct sctphdr *sh,
struct sctp_inpcb **inp_p, struct sctp_nets **netp, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_tcb *stcb;
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
struct sockaddr_storage remote_store;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
struct sctp_paramhdr parm_buf, *phdr;
int ptype;
int zero_address = 0;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
struct sockaddr_in *sin;
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
struct sockaddr_in6 *sin6;
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
memset(&remote_store, 0, sizeof(remote_store));
phdr = sctp_get_next_param(m, offset + sizeof(struct sctp_asconf_chunk),
&parm_buf, sizeof(struct sctp_paramhdr));
if (phdr == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_INPUT3, "%s: failed to get asconf lookup addr\n",
__FUNCTION__);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return NULL;
}
ptype = (int)((uint32_t) ntohs(phdr->param_type));
/* get the correlation address */
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (ptype) {
#ifdef INET6
case SCTP_IPV6_ADDRESS:
{
/* ipv6 address param */
struct sctp_ipv6addr_param *p6, p6_buf;
if (ntohs(phdr->param_length) != sizeof(struct sctp_ipv6addr_param)) {
return NULL;
}
p6 = (struct sctp_ipv6addr_param *)sctp_get_next_param(m,
offset + sizeof(struct sctp_asconf_chunk),
&p6_buf.ph, sizeof(*p6));
if (p6 == NULL) {
SCTPDBG(SCTP_DEBUG_INPUT3, "%s: failed to get asconf v6 lookup addr\n",
__FUNCTION__);
return (NULL);
}
sin6 = (struct sockaddr_in6 *)&remote_store;
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_port = sh->src_port;
memcpy(&sin6->sin6_addr, &p6->addr, sizeof(struct in6_addr));
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
zero_address = 1;
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case SCTP_IPV4_ADDRESS:
{
/* ipv4 address param */
struct sctp_ipv4addr_param *p4, p4_buf;
if (ntohs(phdr->param_length) != sizeof(struct sctp_ipv4addr_param)) {
return NULL;
}
p4 = (struct sctp_ipv4addr_param *)sctp_get_next_param(m,
offset + sizeof(struct sctp_asconf_chunk),
&p4_buf.ph, sizeof(*p4));
if (p4 == NULL) {
SCTPDBG(SCTP_DEBUG_INPUT3, "%s: failed to get asconf v4 lookup addr\n",
__FUNCTION__);
return (NULL);
}
sin = (struct sockaddr_in *)&remote_store;
sin->sin_family = AF_INET;
sin->sin_len = sizeof(*sin);
sin->sin_port = sh->src_port;
memcpy(&sin->sin_addr, &p4->addr, sizeof(struct in_addr));
if (sin->sin_addr.s_addr == INADDR_ANY)
zero_address = 1;
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* invalid address param type */
return NULL;
}
if (zero_address) {
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
stcb = sctp_findassoc_by_vtag(NULL, dst, ntohl(sh->v_tag), inp_p,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
netp, sh->src_port, sh->dest_port, 1, vrf_id, 0);
Fix a refcount issue. The called only decrements is stcb is NULL. MFC after: 3 days Discussed with: rrs
2012-08-05 10:47:18 +00:00
if (stcb != NULL) {
SCTP_INP_DECR_REF(*inp_p);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
stcb = sctp_findassociation_ep_addr(inp_p,
(struct sockaddr *)&remote_store, netp,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
dst, NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
return (stcb);
}
/*
* allocate a sctp_inpcb and setup a temporary binding to a port/all
* addresses. This way if we don't get a bind we by default pick a ephemeral
* port with all addresses bound.
*/
int
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
sctp_inpcb_alloc(struct socket *so, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* we get called when a new endpoint starts up. We need to allocate
* the sctp_inpcb structure from the zone and init it. Mark it as
* unbound and find a port that we can use as an ephemeral with
* INADDR_ANY. If the user binds later no problem we can then add in
* the specific addresses. And setup the default parameters for the
* EP.
*/
int i, error;
struct sctp_inpcb *inp;
struct sctp_pcb *m;
struct timeval time;
sctp_sharedkey_t *null_key;
error = 0;
SCTP_INP_INFO_WLOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
inp = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_ep), struct sctp_inpcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (inp == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTP_PRINTF("Out of SCTP-INPCB structures - no resources\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, ENOBUFS);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (ENOBUFS);
}
/* zap it */
bzero(inp, sizeof(*inp));
/* bump generations */
/* setup socket pointers */
inp->sctp_socket = so;
inp->ip_inp.inp.inp_socket = so;
Fix the handling of the flowlabel and DSCP value in the SCTP_PEER_ADDR_PARAMS socket option. Honor the net.inet6.ip6.auto_flowlabel sysctl setting. Approved by: re (bz) MFC after: 1 month.
2011-09-14 08:15:21 +00:00
#ifdef INET6
if (MODULE_GLOBAL(ip6_auto_flowlabel)) {
inp->ip_inp.inp.inp_flags |= IN6P_AUTOFLOWLABEL;
}
#endif
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
inp->sctp_associd_counter = 1;
- window update sacks sent incorrectly after shutdown which caused extra abort from peer. - RTT time calculation was not being done in express sack handling since it refered to an unused variable (rto_pending). Removed variable. - socket buffer high water access macro-ized.
2007-03-20 10:23:11 +00:00
inp->partial_delivery_point = SCTP_SB_LIMIT_RCV(so) >> SCTP_PARTIAL_DELIVERY_SHIFT;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->sctp_frag_point = SCTP_DEFAULT_MAXSEGMENT;
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
inp->sctp_cmt_on_off = SCTP_BASE_SYSCTL(sctp_cmt_on_off);
Make sure that changing the ECN sysctl does not affect exisiting associations and endpoints. MFC after: 3 months.
2011-02-03 19:59:00 +00:00
inp->sctp_ecn_enable = SCTP_BASE_SYSCTL(sctp_ecn_enable);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* init the small hash table we use to track asocid <-> tcb */
inp->sctp_asocidhash = SCTP_HASH_INIT(SCTP_STACK_VTAG_HASH_SIZE, &inp->hashasocidmark);
if (inp->sctp_asocidhash == NULL) {
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_ep), inp);
SCTP_INP_INFO_WUNLOCK();
Hopefully this fixes a LOR by making so we only hold the iterator lock during updates to the iterators work. MFC after: 1 week
2010-06-06 02:33:46 +00:00
return (ENOBUFS);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
}
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#ifdef IPSEC
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct inpcbpolicy *pcb_sp = NULL;
Commit IPv6 support for FAST_IPSEC to the tree. This commit includes only the kernel files, the rest of the files will follow in a second commit. Reviewed by: bz Approved by: re Supported by: Secure Computing
2007-07-01 11:41:27 +00:00
error = ipsec_init_policy(so, &pcb_sp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Arrange to share the policy */
inp->ip_inp.inp.inp_sp = pcb_sp;
((struct in6pcb *)(&inp->ip_inp.inp))->in6p_sp = pcb_sp;
}
if (error != 0) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_ep), inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_WUNLOCK();
return error;
}
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#endif /* IPSEC */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INCR_EP_COUNT();
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
inp->ip_inp.inp.inp_ip_ttl = MODULE_GLOBAL(ip_defttl);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_WUNLOCK();
so->so_pcb = (caddr_t)inp;
Don't check for SOCK_DGRAM anymore. Also remove multicast related code which is not necessary anymore.
2011-07-12 20:14:03 +00:00
if (SCTP_SO_TYPE(so) == SOCK_SEQPACKET) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* UDP style socket */
inp->sctp_flags = (SCTP_PCB_FLAGS_UDPTYPE |
SCTP_PCB_FLAGS_UNBOUND);
/* Be sure it is NON-BLOCKING IO for UDP */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* SCTP_SET_SO_NBIO(so); */
} else if (SCTP_SO_TYPE(so) == SOCK_STREAM) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* TCP style socket */
inp->sctp_flags = (SCTP_PCB_FLAGS_TCPTYPE |
SCTP_PCB_FLAGS_UNBOUND);
/* Be sure we have blocking IO by default */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
SCTP_CLEAR_SO_NBIO(so);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
/*
* unsupported socket type (RAW, etc)- in case we missed it
* in protosw
*/
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EOPNOTSUPP);
Found by Michael. In cases where we run out of memory (no more inp space) we don't propely NULL the INP on return. Obtained from: tuexen MFC after: 3 Days
2010-06-09 22:05:29 +00:00
so->so_pcb = NULL;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_ep), inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EOPNOTSUPP);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_default_frag_interleave) == SCTP_FRAG_LEVEL_1) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_feature_on(inp, SCTP_PCB_FLAGS_FRAG_INTERLEAVE);
sctp_feature_off(inp, SCTP_PCB_FLAGS_INTERLEAVE_STRMS);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
} else if (SCTP_BASE_SYSCTL(sctp_default_frag_interleave) == SCTP_FRAG_LEVEL_2) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_feature_on(inp, SCTP_PCB_FLAGS_FRAG_INTERLEAVE);
sctp_feature_on(inp, SCTP_PCB_FLAGS_INTERLEAVE_STRMS);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
} else if (SCTP_BASE_SYSCTL(sctp_default_frag_interleave) == SCTP_FRAG_LEVEL_0) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_feature_off(inp, SCTP_PCB_FLAGS_FRAG_INTERLEAVE);
sctp_feature_off(inp, SCTP_PCB_FLAGS_INTERLEAVE_STRMS);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
inp->sctp_tcbhash = SCTP_HASH_INIT(SCTP_BASE_SYSCTL(sctp_pcbtblsize),
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
&inp->sctp_hashmark);
if (inp->sctp_tcbhash == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTP_PRINTF("Out of SCTP-INPCB->hashinit - no resources\n");
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, ENOBUFS);
Found by Michael. In cases where we run out of memory (no more inp space) we don't propely NULL the INP on return. Obtained from: tuexen MFC after: 3 Days
2010-06-09 22:05:29 +00:00
so->so_pcb = NULL;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_ep), inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (ENOBUFS);
}
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
inp->def_vrf_id = vrf_id;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_WLOCK();
SCTP_INP_LOCK_INIT(inp);
- Update the comment lines in sctp_input.c - We need to init the INP_LOCK since otherwise for non-SMP kernels you crash when you set the TOS.
2007-06-15 19:28:58 +00:00
INP_LOCK_INIT(&inp->ip_inp.inp, "inp", "sctpinp");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_READ_INIT(inp);
SCTP_ASOC_CREATE_LOCK_INIT(inp);
/* lock the new ep */
SCTP_INP_WLOCK(inp);
/* add it to the info area */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
LIST_INSERT_HEAD(&SCTP_BASE_INFO(listhead), inp, sctp_list);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_WUNLOCK();
TAILQ_INIT(&inp->read_queue);
LIST_INIT(&inp->sctp_addr_list);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_INIT(&inp->sctp_asoc_list);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef SCTP_TRACK_FREED_ASOCS
/* TEMP CODE */
LIST_INIT(&inp->sctp_asoc_free_list);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Init the timer structure for signature change */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_OS_TIMER_INIT(&inp->sctp_ep.signature_change.timer);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->sctp_ep.signature_change.type = SCTP_TIMER_TYPE_NEWCOOKIE;
/* now init the actual endpoint default data */
m = &inp->sctp_ep;
/* setup the base timeout information */
m->sctp_timeoutticks[SCTP_TIMER_SEND] = SEC_TO_TICKS(SCTP_SEND_SEC); /* needed ? */
m->sctp_timeoutticks[SCTP_TIMER_INIT] = SEC_TO_TICKS(SCTP_INIT_SEC); /* needed ? */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
m->sctp_timeoutticks[SCTP_TIMER_RECV] = MSEC_TO_TICKS(SCTP_BASE_SYSCTL(sctp_delayed_sack_time_default));
m->sctp_timeoutticks[SCTP_TIMER_HEARTBEAT] = MSEC_TO_TICKS(SCTP_BASE_SYSCTL(sctp_heartbeat_interval_default));
m->sctp_timeoutticks[SCTP_TIMER_PMTU] = SEC_TO_TICKS(SCTP_BASE_SYSCTL(sctp_pmtu_raise_time_default));
m->sctp_timeoutticks[SCTP_TIMER_MAXSHUTDOWN] = SEC_TO_TICKS(SCTP_BASE_SYSCTL(sctp_shutdown_guard_time_default));
m->sctp_timeoutticks[SCTP_TIMER_SIGNATURE] = SEC_TO_TICKS(SCTP_BASE_SYSCTL(sctp_secret_lifetime_default));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* all max/min max are in ms */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
m->sctp_maxrto = SCTP_BASE_SYSCTL(sctp_rto_max_default);
m->sctp_minrto = SCTP_BASE_SYSCTL(sctp_rto_min_default);
m->initial_rto = SCTP_BASE_SYSCTL(sctp_rto_initial_default);
m->initial_init_rto_max = SCTP_BASE_SYSCTL(sctp_init_rto_max_default);
m->sctp_sack_freq = SCTP_BASE_SYSCTL(sctp_sack_freq_default);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
m->max_open_streams_intome = MAX_SCTP_STREAMS;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
m->max_init_times = SCTP_BASE_SYSCTL(sctp_init_rtx_max_default);
m->max_send_times = SCTP_BASE_SYSCTL(sctp_assoc_rtx_max_default);
m->def_net_failure = SCTP_BASE_SYSCTL(sctp_path_rtx_max_default);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
m->def_net_pf_threshold = SCTP_BASE_SYSCTL(sctp_path_pf_threshold);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
m->sctp_sws_sender = SCTP_SWS_SENDER_DEF;
m->sctp_sws_receiver = SCTP_SWS_RECEIVER_DEF;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
m->max_burst = SCTP_BASE_SYSCTL(sctp_max_burst_default);
1) Allow a chunk to track the cwnd it was at when sent. 2) Add separate max-bursts for retransmit and hb. These are set to sysctlable values but not settable via the socket api. This makes sure we don't blast out HB's or fast-retransmits. 3) Determine on the first data transmission on a net if its local-lan (by being under or over a RTT). This can later be used to think about different algorithms based on locallan vs big-i (experimental) 4) The cwnd should NOT be allowed to grow when an ECNEcho is seen (TCP has this same bug). We fix this in SCTP so an ECNe being seen prevents an advance of cwnd. 5) CWR's should not be sent multiple times to the same network, instead just updating the TSN being transmitted if needed. MFC after: 1 Month
2011-02-02 11:13:23 +00:00
m->fr_max_burst = SCTP_BASE_SYSCTL(sctp_fr_max_burst_default);
Cleanup the management of CC functions. MFC after: 3 months.
2011-01-19 22:10:35 +00:00
m->sctp_default_cc_module = SCTP_BASE_SYSCTL(sctp_default_cc_module);
Add stream scheduling support. This work is based on a patch received from Robin Seggelmann. MFC after: 3 months.
2011-01-23 19:36:28 +00:00
m->sctp_default_ss_module = SCTP_BASE_SYSCTL(sctp_default_ss_module);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* number of streams to pre-open on a association */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
m->pre_open_stream_count = SCTP_BASE_SYSCTL(sctp_nr_outgoing_streams_default);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Add adaptation cookie */
m->adaptation_layer_indicator = 0x504C5253;
/* seed random number generator */
m->random_counter = 1;
m->store_at = SCTP_SIGNATURE_SIZE;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_READ_RANDOM(m->random_numbers, sizeof(m->random_numbers));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_fill_random_store(m);
/* Minimum cookie size */
m->size_of_a_cookie = (sizeof(struct sctp_init_msg) * 2) +
sizeof(struct sctp_state_cookie);
m->size_of_a_cookie += SCTP_SIGNATURE_SIZE;
/* Setup the initial secret */
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_GETTIME_TIMEVAL(&time);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
m->time_of_secret_change = time.tv_sec;
for (i = 0; i < SCTP_NUMBER_OF_SECRETS; i++) {
m->secret_key[0][i] = sctp_select_initial_TSN(m);
}
sctp_timer_start(SCTP_TIMER_TYPE_NEWCOOKIE, inp, NULL, NULL);
/* How long is a cookie good for ? */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
m->def_cookie_life = MSEC_TO_TICKS(SCTP_BASE_SYSCTL(sctp_valid_cookie_life_default));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Initialize authentication parameters
*/
m->local_hmacs = sctp_default_supported_hmaclist();
m->local_auth_chunks = sctp_alloc_chunklist();
Fix the handling of the flowlabel and DSCP value in the SCTP_PEER_ADDR_PARAMS socket option. Honor the net.inet6.ip6.auto_flowlabel sysctl setting. Approved by: re (bz) MFC after: 1 month.
2011-09-14 08:15:21 +00:00
m->default_dscp = 0;
#ifdef INET6
m->default_flowlabel = 0;
#endif
Add support for the SCTP_REMOTE_UDP_ENCAPS_PORT socket option. Retire the the now unused sctp_udp_tunneling_for_client_enable sysctl variable. MFC after: 3 months.
2011-11-20 15:00:45 +00:00
m->port = 0; /* encapsulation disabled by default */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_auth_set_default_chunks(m->local_auth_chunks);
LIST_INIT(&m->shared_keys);
/* add default NULL key as key id 0 */
null_key = sctp_alloc_sharedkey();
sctp_insert_sharedkey(&m->shared_keys, null_key);
SCTP_INP_WUNLOCK(inp);
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 12);
#endif
return (error);
}
void
sctp_move_pcb_and_assoc(struct sctp_inpcb *old_inp, struct sctp_inpcb *new_inp,
struct sctp_tcb *stcb)
{
struct sctp_nets *net;
uint16_t lport, rport;
struct sctppcbhead *head;
struct sctp_laddr *laddr, *oladdr;
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
atomic_add_int(&stcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_TCB_UNLOCK(stcb);
SCTP_INP_INFO_WLOCK();
SCTP_INP_WLOCK(old_inp);
SCTP_INP_WLOCK(new_inp);
SCTP_TCB_LOCK(stcb);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
atomic_subtract_int(&stcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
new_inp->sctp_ep.time_of_secret_change =
old_inp->sctp_ep.time_of_secret_change;
memcpy(new_inp->sctp_ep.secret_key, old_inp->sctp_ep.secret_key,
sizeof(old_inp->sctp_ep.secret_key));
new_inp->sctp_ep.current_secret_number =
old_inp->sctp_ep.current_secret_number;
new_inp->sctp_ep.last_secret_number =
old_inp->sctp_ep.last_secret_number;
new_inp->sctp_ep.size_of_a_cookie = old_inp->sctp_ep.size_of_a_cookie;
/* make it so new data pours into the new socket */
stcb->sctp_socket = new_inp->sctp_socket;
stcb->sctp_ep = new_inp;
/* Copy the port across */
lport = new_inp->sctp_lport = old_inp->sctp_lport;
rport = stcb->rport;
/* Pull the tcb from the old association */
LIST_REMOVE(stcb, sctp_tcbhash);
LIST_REMOVE(stcb, sctp_tcblist);
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
if (stcb->asoc.in_asocid_hash) {
LIST_REMOVE(stcb, sctp_tcbasocidhash);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now insert the new_inp into the TCP connected hash */
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
head = &SCTP_BASE_INFO(sctp_tcpephash)[SCTP_PCBHASH_ALLADDR((lport | rport), SCTP_BASE_INFO(hashtcpmark))];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_INSERT_HEAD(head, new_inp, sctp_hash);
- most all includes (#include <>) migrate to the sctp_os_bsd.h file - Finally all splxx() are removed - Count error fixed in mapping array which might cause a wrong cumack generation. - Invariants around panic for case D + printf when no invariants. - one-to-one model race condition fixed by using a pre-formed connection and then completing the work so accept won't happen on a non-formed association. - Some additional paranoia checks in sctp_output. - Locks that were missing in the accept code. Approved by: gnn
2007-01-18 09:58:43 +00:00
/* Its safe to access */
new_inp->sctp_flags &= ~SCTP_PCB_FLAGS_UNBOUND;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now move the tcb into the endpoint list */
LIST_INSERT_HEAD(&new_inp->sctp_asoc_list, stcb, sctp_tcblist);
/*
* Question, do we even need to worry about the ep-hash since we
* only have one connection? Probably not :> so lets get rid of it
* and not suck up any kernel memory in that.
*/
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
if (stcb->asoc.in_asocid_hash) {
struct sctpasochead *lhd;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
lhd = &new_inp->sctp_asocidhash[SCTP_PCBHASH_ASOC(stcb->asoc.assoc_id,
new_inp->hashasocidmark)];
LIST_INSERT_HEAD(lhd, stcb, sctp_tcbasocidhash);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Ok. Let's restart timer. */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
sctp_timer_start(SCTP_TIMER_TYPE_PATHMTURAISE, new_inp,
stcb, net);
}
SCTP_INP_INFO_WUNLOCK();
if (new_inp->sctp_tcbhash != NULL) {
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
SCTP_HASH_FREE(new_inp->sctp_tcbhash, new_inp->sctp_hashmark);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
new_inp->sctp_tcbhash = NULL;
}
if ((new_inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) == 0) {
/* Subset bound, so copy in the laddr list from the old_inp */
LIST_FOREACH(oladdr, &old_inp->sctp_addr_list, sctp_nxt_addr) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
laddr = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_laddr), struct sctp_laddr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (laddr == NULL) {
/*
* Gak, what can we do? This assoc is really
* HOSED. We probably should send an abort
* here.
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Association hosed in TCP model, out of laddr memory\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
SCTP_INCR_LADDR_COUNT();
bzero(laddr, sizeof(*laddr));
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
(void)SCTP_GETTIME_TIMEVAL(&laddr->start_time);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
laddr->ifa = oladdr->ifa;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
atomic_add_int(&laddr->ifa->refcount, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_INSERT_HEAD(&new_inp->sctp_addr_list, laddr,
sctp_nxt_addr);
new_inp->laddr_count++;
When moving an stcb to a new inp and we copy over the list of bound addresses, update the last used address pointer. If not, it might result in a crash if the old inp goes away. MFC after: 3 days.
2011-10-10 12:28:47 +00:00
if (oladdr == stcb->asoc.last_used_address) {
stcb->asoc.last_used_address = laddr;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
/*
* Now any running timers need to be adjusted since we really don't
* care if they are running or not just blast in the new_inp into
* all of them.
*/
stcb->asoc.dack_timer.ep = (void *)new_inp;
stcb->asoc.asconf_timer.ep = (void *)new_inp;
stcb->asoc.strreset_timer.ep = (void *)new_inp;
stcb->asoc.shut_guard_timer.ep = (void *)new_inp;
stcb->asoc.autoclose_timer.ep = (void *)new_inp;
stcb->asoc.delayed_event_timer.ep = (void *)new_inp;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
stcb->asoc.delete_prim_timer.ep = (void *)new_inp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* now what about the nets? */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
net->pmtu_timer.ep = (void *)new_inp;
Update the inp stored in a HB-timer when moving an stcb to a new inp. Use only this stored inp when processing a HB timeout. This fixes a bug which results in a crash. MFC after: 3 days.
2011-10-09 14:12:17 +00:00
net->hb_timer.ep = (void *)new_inp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->rxt_timer.ep = (void *)new_inp;
}
SCTP_INP_WUNLOCK(new_inp);
SCTP_INP_WUNLOCK(old_inp);
}
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
/* sctp_ifap is used to bypass normal local address validation checks */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_inpcb_bind(struct socket *so, struct sockaddr *addr,
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
struct sctp_ifa *sctp_ifap, struct thread *p)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/* bind a ep to a socket address */
struct sctppcbhead *head;
struct sctp_inpcb *inp, *inp_tmp;
struct inpcb *ip_inp;
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
int port_reuse_active = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int bindall;
uint16_t lport;
int error;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint32_t vrf_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
lport = 0;
error = 0;
bindall = 1;
inp = (struct sctp_inpcb *)so->so_pcb;
ip_inp = (struct inpcb *)so->so_pcb;
#ifdef SCTP_DEBUG
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (addr) {
Minor cleanups of debug messages. MFC after: 3 days
2012-12-27 08:06:58 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Bind called port: %d\n",
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
ntohs(((struct sockaddr_in *)addr)->sin_port));
Minor cleanups of debug messages. MFC after: 3 days
2012-12-27 08:06:58 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Addr: ");
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG_ADDR(SCTP_DEBUG_PCB1, addr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((inp->sctp_flags & SCTP_PCB_FLAGS_UNBOUND) == 0) {
/* already did a bind, subsequent binds NOT allowed ! */
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EINVAL);
}
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
#ifdef INVARIANTS
if (p == NULL)
panic("null proc/thread");
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (addr != NULL) {
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
switch (addr->sa_family) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
case AF_INET:
{
struct sockaddr_in *sin;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
/* IPV6_V6ONLY socket? */
if (SCTP_IPV6_V6ONLY(ip_inp)) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
if (addr->sa_len != sizeof(*sin)) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
return (EINVAL);
}
sin = (struct sockaddr_in *)addr;
lport = sin->sin_port;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
/*
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
* For LOOPBACK the prison_local_ip4() call
* will transmute the ip address to the
* proper value.
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
*/
Have the jail code use the error returned to pass not constant errors. Obtained from: jamie@freebsd.org
2009-02-13 18:44:30 +00:00
if (p && (error = prison_local_ip4(p->td_ucred, &sin->sin_addr)) != 0) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, error);
return (error);
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
}
if (sin->sin_addr.s_addr != INADDR_ANY) {
bindall = 0;
}
break;
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
case AF_INET6:
{
/*
* Only for pure IPv6 Address. (No IPv4
* Mapped!)
*/
struct sockaddr_in6 *sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
sin6 = (struct sockaddr_in6 *)addr;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
if (addr->sa_len != sizeof(*sin6)) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
lport = sin6->sin6_port;
/*
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
* For LOOPBACK the prison_local_ip6() call
* will transmute the ipv6 address to the
* proper value.
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
*/
Have the jail code use the error returned to pass not constant errors. Obtained from: jamie@freebsd.org
2009-02-13 18:44:30 +00:00
if (p && (error = prison_local_ip6(p->td_ucred, &sin6->sin6_addr,
(SCTP_IPV6_V6ONLY(inp) != 0))) != 0) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, error);
return (error);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
bindall = 0;
/* KAME hack: embed scopeid */
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
if (sa6_embedscope(sin6, MODULE_GLOBAL(ip6_use_defzone)) != 0) {
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
return (EINVAL);
}
}
/* this must be cleared for ifa_ifwithaddr() */
sin6->sin6_scope_id = 0;
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
default:
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EAFNOSUPPORT);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EAFNOSUPPORT);
}
}
- Fix a comment about prison. - Fix it so the VRF is captured while locks are held. MFC after: 1 week
2008-01-28 10:34:38 +00:00
SCTP_INP_INFO_WLOCK();
SCTP_INP_WLOCK(inp);
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* Setup a vrf_id to be the default for the non-bind-all case. */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
vrf_id = inp->def_vrf_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* increase our count due to the unlock we do */
SCTP_INP_INCR_REF(inp);
if (lport) {
/*
Whitespace changes. MFC after: 10 days
2012-09-09 08:14:04 +00:00
* Did the caller specify a port? if so we must see if an ep
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* already has this one bound.
*/
/* got to be root to get at low ports */
if (ntohs(lport) < IPPORT_RESERVED) {
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
if (p && (error =
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
priv_check(p, PRIV_NETINET_RESERVEDPORT)
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
return (error);
}
}
if (p == NULL) {
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, error);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (error);
}
SCTP_INP_WUNLOCK(inp);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (bindall) {
vrf_id = inp->def_vrf_id;
inp_tmp = sctp_pcb_findep(addr, 0, 1, vrf_id);
if (inp_tmp != NULL) {
/*
* lock guy returned and lower count note
* that we are not bound so inp_tmp should
* NEVER be inp. And it is this inp
* (inp_tmp) that gets the reference bump,
* so we must lower it.
*/
SCTP_INP_DECR_REF(inp_tmp);
/* unlock info */
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if ((sctp_is_feature_on(inp, SCTP_PCB_FLAGS_PORTREUSE)) &&
(sctp_is_feature_on(inp_tmp, SCTP_PCB_FLAGS_PORTREUSE))) {
/*
* Ok, must be one-2-one and
* allowing port re-use
*/
port_reuse_active = 1;
goto continue_anyway;
}
SCTP_INP_DECR_REF(inp);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EADDRINUSE);
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
return (EADDRINUSE);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
} else {
inp_tmp = sctp_pcb_findep(addr, 0, 1, vrf_id);
if (inp_tmp != NULL) {
/*
* lock guy returned and lower count note
* that we are not bound so inp_tmp should
* NEVER be inp. And it is this inp
* (inp_tmp) that gets the reference bump,
* so we must lower it.
*/
SCTP_INP_DECR_REF(inp_tmp);
/* unlock info */
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if ((sctp_is_feature_on(inp, SCTP_PCB_FLAGS_PORTREUSE)) &&
(sctp_is_feature_on(inp_tmp, SCTP_PCB_FLAGS_PORTREUSE))) {
/*
* Ok, must be one-2-one and
* allowing port re-use
*/
port_reuse_active = 1;
goto continue_anyway;
}
SCTP_INP_DECR_REF(inp);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EADDRINUSE);
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
return (EADDRINUSE);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
continue_anyway:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_WLOCK(inp);
if (bindall) {
/* verify that no lport is not used by a singleton */
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if ((port_reuse_active == 0) &&
Whitespace changes. MFC after: 10 days
2012-09-09 08:14:04 +00:00
(inp_tmp = sctp_isport_inuse(inp, lport, vrf_id))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Sorry someone already has this one bound */
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if ((sctp_is_feature_on(inp, SCTP_PCB_FLAGS_PORTREUSE)) &&
(sctp_is_feature_on(inp_tmp, SCTP_PCB_FLAGS_PORTREUSE))) {
port_reuse_active = 1;
} else {
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EADDRINUSE);
return (EADDRINUSE);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
} else {
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
uint16_t first, last, candidate;
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
uint16_t count;
int done;
if (ip_inp->inp_flags & INP_HIGHPORT) {
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
first = MODULE_GLOBAL(ipport_hifirstauto);
last = MODULE_GLOBAL(ipport_hilastauto);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
} else if (ip_inp->inp_flags & INP_LOWPORT) {
if (p && (error =
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
priv_check(p, PRIV_NETINET_RESERVEDPORT)
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
)) {
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, error);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
return (error);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
first = MODULE_GLOBAL(ipport_lowfirstauto);
last = MODULE_GLOBAL(ipport_lowlastauto);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
} else {
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
first = MODULE_GLOBAL(ipport_firstauto);
last = MODULE_GLOBAL(ipport_lastauto);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
}
if (first > last) {
uint16_t temp;
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
temp = first;
first = last;
last = temp;
}
count = last - first + 1; /* number of candidates */
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
candidate = first + sctp_select_initial_TSN(&inp->sctp_ep) % (count);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
done = 0;
while (!done) {
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if (sctp_isport_inuse(inp, htons(candidate), inp->def_vrf_id) == NULL) {
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
done = 1;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
if (!done) {
if (--count == 0) {
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EADDRINUSE);
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
return (EADDRINUSE);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
}
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
if (candidate == last)
candidate = first;
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
else
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
candidate = candidate + 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
lport = htons(candidate);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
SCTP_INP_DECR_REF(inp);
if (inp->sctp_flags & (SCTP_PCB_FLAGS_SOCKET_GONE |
SCTP_PCB_FLAGS_SOCKET_ALLGONE)) {
/*
* this really should not happen. The guy did a non-blocking
* bind and then did a close at the same time.
*/
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EINVAL);
}
/* ok we look clear to give out this port, so lets setup the binding */
if (bindall) {
/* binding to all addresses, so just set in the proper flags */
inp->sctp_flags |= SCTP_PCB_FLAGS_BOUNDALL;
/* set the automatic addr changes from kernel flag */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_auto_asconf) == 0) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_feature_off(inp, SCTP_PCB_FLAGS_DO_ASCONF);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_feature_off(inp, SCTP_PCB_FLAGS_AUTO_ASCONF);
} else {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_feature_on(inp, SCTP_PCB_FLAGS_DO_ASCONF);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_feature_on(inp, SCTP_PCB_FLAGS_AUTO_ASCONF);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_multiple_asconfs) == 0) {
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
sctp_feature_off(inp, SCTP_PCB_FLAGS_MULTIPLE_ASCONFS);
} else {
sctp_feature_on(inp, SCTP_PCB_FLAGS_MULTIPLE_ASCONFS);
}
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/*
* set the automatic mobility_base from kernel flag (by
* micchie)
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_mobility_base) == 0) {
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
sctp_mobility_feature_off(inp, SCTP_MOBILITY_BASE);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_mobility_feature_off(inp, SCTP_MOBILITY_PRIM_DELETED);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
} else {
sctp_mobility_feature_on(inp, SCTP_MOBILITY_BASE);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_mobility_feature_off(inp, SCTP_MOBILITY_PRIM_DELETED);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
}
/*
* set the automatic mobility_fasthandoff from kernel flag
* (by micchie)
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_mobility_fasthandoff) == 0) {
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
sctp_mobility_feature_off(inp, SCTP_MOBILITY_FASTHANDOFF);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_mobility_feature_off(inp, SCTP_MOBILITY_PRIM_DELETED);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
} else {
sctp_mobility_feature_on(inp, SCTP_MOBILITY_FASTHANDOFF);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_mobility_feature_off(inp, SCTP_MOBILITY_PRIM_DELETED);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
/*
* bind specific, make sure flags is off and add a new
* address structure to the sctp_addr_list inside the ep
* structure.
*
* We will need to allocate one and insert it at the head. The
* socketopt call can just insert new addresses in there as
* well. It will also have to do the embed scope kame hack
* too (before adding).
*/
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *ifa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sockaddr_storage store_sa;
memset(&store_sa, 0, sizeof(store_sa));
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (addr->sa_family) {
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#ifdef INET
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET:
{
struct sockaddr_in *sin;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
sin = (struct sockaddr_in *)&store_sa;
memcpy(sin, addr, sizeof(struct sockaddr_in));
sin->sin_port = 0;
break;
}
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#endif
#ifdef INET6
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET6:
{
struct sockaddr_in6 *sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
sin6 = (struct sockaddr_in6 *)&store_sa;
memcpy(sin6, addr, sizeof(struct sockaddr_in6));
sin6->sin6_port = 0;
break;
}
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#endif
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* first find the interface with the bound address need to
* zero out the port to find the address! yuck! can't do
* this earlier since need port for sctp_pcb_findep()
*/
Whitespace changes. MFC after: 10 days
2012-09-09 08:14:04 +00:00
if (sctp_ifap != NULL) {
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
ifa = sctp_ifap;
Whitespace changes. MFC after: 10 days
2012-09-09 08:14:04 +00:00
} else {
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
/*
* Note for BSD we hit here always other O/S's will
* pass things in via the sctp_ifap argument
* (Panda).
*/
ifa = sctp_find_ifa_by_addr((struct sockaddr *)&store_sa,
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
vrf_id, SCTP_ADDR_NOT_LOCKED);
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ifa == NULL) {
/* Can't find an interface with that address */
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EADDRNOTAVAIL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EADDRNOTAVAIL);
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET6
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (addr->sa_family == AF_INET6) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* GAK, more FIXME IFA lock? */
if (ifa->localifa_flags & SCTP_ADDR_IFA_UNUSEABLE) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Can't bind a non-existent addr. */
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EINVAL);
}
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* we're not bound all */
inp->sctp_flags &= ~SCTP_PCB_FLAGS_BOUNDALL;
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* allow bindx() to send ASCONF's for binding changes */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_feature_on(inp, SCTP_PCB_FLAGS_DO_ASCONF);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
/* clear automatic addr changes from kernel flag */
sctp_feature_off(inp, SCTP_PCB_FLAGS_AUTO_ASCONF);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* add this address to the endpoint list */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
error = sctp_insert_laddr(&inp->sctp_addr_list, ifa, 0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (error != 0) {
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
return (error);
}
inp->laddr_count++;
}
/* find the bucket */
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if (port_reuse_active) {
/* Put it into tcp 1-2-1 hash */
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
head = &SCTP_BASE_INFO(sctp_tcpephash)[SCTP_PCBHASH_ALLADDR(lport, SCTP_BASE_INFO(hashtcpmark))];
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
inp->sctp_flags |= SCTP_PCB_FLAGS_IN_TCPPOOL;
} else {
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
head = &SCTP_BASE_INFO(sctp_ephash)[SCTP_PCBHASH_ALLADDR(lport, SCTP_BASE_INFO(hashmark))];
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* put it in the bucket */
LIST_INSERT_HEAD(head, inp, sctp_hash);
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Main hash to bind at head:%p, bound port:%d - in tcp_pool=%d\n",
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
(void *)head, ntohs(lport), port_reuse_active);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* set in the port */
inp->sctp_lport = lport;
/* turn off just the unbound flag */
inp->sctp_flags &= ~SCTP_PCB_FLAGS_UNBOUND;
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
return (0);
}
static void
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
sctp_iterator_inp_being_freed(struct sctp_inpcb *inp)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
struct sctp_iterator *it, *nit;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* We enter with the only the ITERATOR_LOCK in place and a write
* lock on the inp_info stuff.
*/
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
it = sctp_it_ctl.cur_it;
if (it && (it->vn != curvnet)) {
/* Its not looking at our VNET */
return;
}
if (it && (it->inp == inp)) {
/*
* This is tricky and we hold the iterator lock, but when it
* returns and gets the lock (when we release it) the
* iterator will try to operate on inp. We need to stop that
* from happening. But of course the iterator has a
* reference on the stcb and inp. We can mark it and it will
* stop.
*
* If its a single iterator situation, we set the end iterator
* flag. Otherwise we set the iterator to go to the next
* inp.
*
*/
if (it->iterator_flags & SCTP_ITERATOR_DO_SINGLE_INP) {
sctp_it_ctl.iterator_flags |= SCTP_ITERATOR_STOP_CUR_IT;
} else {
sctp_it_ctl.iterator_flags |= SCTP_ITERATOR_STOP_CUR_INP;
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
* Now go through and remove any single reference to our inp that
* may be still pending on the list
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_IPI_ITERATOR_WQ_LOCK();
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(it, &sctp_it_ctl.iteratorhead, sctp_nxt_itr, nit) {
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
if (it->vn != curvnet) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (it->inp == inp) {
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
/* This one points to me is it inp specific? */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (it->iterator_flags & SCTP_ITERATOR_DO_SINGLE_INP) {
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
/* Remove and free this one */
TAILQ_REMOVE(&sctp_it_ctl.iteratorhead,
it, sctp_nxt_itr);
if (it->function_atend != NULL) {
(*it->function_atend) (it->pointer, it->val);
}
SCTP_FREE(it, SCTP_M_ITER);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
it->inp = LIST_NEXT(it->inp, sctp_list);
* Fix a bug where the length of the ASCONF-ACK was calculated wrong due to using an uninitialized variable. * Fix a bug where a NULL pointer was dereferenced when interfaces come and go at a high rate. * Fix a bug where inps where not deregistered from iterators. * Fix a race condition in freeing an association. * Fix a refcount problem related to the iterator. Each of the above bug results in a panic. It shows up when interfaces come and go at a high rate. Obtained from: rrs (partly) MFC after: 3 days
2010-06-14 21:25:07 +00:00
if (it->inp) {
SCTP_INP_INCR_REF(it->inp);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
3 Fixes - a) There was a case where a ICMP message could cause us to return leaving a stuck lock on an stcb. b) The iterator needed some tweaks to fix its lock ordering. c) The ITERATOR_LOCK is no longer needed in the freeing of a stcb. Now that the timer based one is gone we don't have a multiple resume situation. Add to that that there was somewhere a path out of the freeing of an assoc that did NOT release the iterator_lock.. it was time to clean this old code up and in the process fix the lock bug. MFC after: 1 week
2010-06-11 03:54:00 +00:00
/*
* When its put in the refcnt is incremented so decr
* it
*/
SCTP_INP_DECR_REF(inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_IPI_ITERATOR_WQ_UNLOCK();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* release sctp_inpcb unbind the port */
void
sctp_inpcb_free(struct sctp_inpcb *inp, int immediate, int from)
{
/*
* Here we free a endpoint. We must find it (if it is in the Hash
* table) and remove it from there. Then we must also find it in the
* overall list and remove it from there. After all removals are
* complete then any timer has to be stopped. Then start the actual
* freeing. a) Any local lists. b) Any associations. c) The hash of
* all associations. d) finally the ep itself.
*/
struct sctp_tcb *asoc, *nasoc;
struct sctp_laddr *laddr, *nladdr;
struct inpcb *ip_pcb;
struct socket *so;
1) Optimize the cleanup and don't always depend on the timer. This is done by considering the locks we will destroy and if they are contended we consider it the same as a reference count being up. Fixing this appears to cleanup another crash that was appearing with all the timers where the socket buf lock got corrupted. 2) Fix the sysctl code to take a lot more care when looking at INP's that are in the GONE or ALLGONE state. MFC after: 1 week
2010-06-06 20:34:17 +00:00
int being_refed = 0;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_queued_to_read *sq, *nsq;
- most all includes (#include <>) migrate to the sctp_os_bsd.h file - Finally all splxx() are removed - Count error fixed in mapping array which might cause a wrong cumack generation. - Invariants around panic for case D + printf when no invariants. - one-to-one model race condition fixed by using a pre-formed connection and then completing the work so accept won't happen on a non-formed association. - Some additional paranoia checks in sctp_output. - Locks that were missing in the accept code. Approved by: gnn
2007-01-18 09:58:43 +00:00
int cnt;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_sharedkey_t *shared_key, *nshared_key;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 0);
#endif
* Fix a bug where the length of the ASCONF-ACK was calculated wrong due to using an uninitialized variable. * Fix a bug where a NULL pointer was dereferenced when interfaces come and go at a high rate. * Fix a bug where inps where not deregistered from iterators. * Fix a race condition in freeing an association. * Fix a refcount problem related to the iterator. Each of the above bug results in a panic. It shows up when interfaces come and go at a high rate. Obtained from: rrs (partly) MFC after: 3 days
2010-06-14 21:25:07 +00:00
SCTP_ITERATOR_LOCK();
/* mark any iterators on the list or being processed */
sctp_iterator_inp_being_freed(inp);
SCTP_ITERATOR_UNLOCK();
Hopefully this fixes a LOR by making so we only hold the iterator lock during updates to the iterators work. MFC after: 1 week
2010-06-06 02:33:46 +00:00
so = inp->sctp_socket;
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
/* been here before.. eeks.. get out of here */
SCTP_PRINTF("This conflict in free SHOULD not be happening! from %d, imm %d\n", from, immediate);
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 1);
#endif
return;
}
SCTP_ASOC_CREATE_LOCK(inp);
SCTP_INP_INFO_WLOCK();
SCTP_INP_WLOCK(inp);
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
if (from == SCTP_CALLED_AFTER_CMPSET_OFCLOSE) {
inp->sctp_flags &= ~SCTP_PCB_FLAGS_CLOSE_IP;
/* socket is gone, so no more wakeups allowed */
inp->sctp_flags |= SCTP_PCB_FLAGS_DONT_WAKE;
inp->sctp_flags &= ~SCTP_PCB_FLAGS_WAKEINPUT;
inp->sctp_flags &= ~SCTP_PCB_FLAGS_WAKEOUTPUT;
}
Hopefully this fixes a LOR by making so we only hold the iterator lock during updates to the iterators work. MFC after: 1 week
2010-06-06 02:33:46 +00:00
/* First time through we have the socket lock, after that no more. */
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_NEWCOOKIE, inp, NULL, NULL,
SCTP_FROM_SCTP_PCB + SCTP_LOC_1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (inp->control) {
sctp_m_freem(inp->control);
inp->control = NULL;
}
if (inp->pkt) {
sctp_m_freem(inp->pkt);
inp->pkt = NULL;
}
ip_pcb = &inp->ip_inp.inp; /* we could just cast the main pointer
* here but I will be nice :> (i.e.
* ip_pcb = ep;) */
- Get rid of the sctp_inpcb_free() "magic numbers", now they are sensible defines that tell what you are directing the function to do.
2007-05-08 15:53:03 +00:00
if (immediate == SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int cnt_in_sd;
cnt_in_sd = 0;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(asoc, &inp->sctp_asoc_list, sctp_tcblist, nasoc) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_TCB_LOCK(asoc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
/* Skip guys being freed */
cnt_in_sd++;
This fixes a bug in the close up of a socket that had un-accepted assoc's. Basically the assoc (and inp) would get stuck and never get cleaned up. MFC after: 1 week
2010-06-05 21:17:23 +00:00
if (asoc->asoc.state & SCTP_STATE_IN_ACCEPT_QUEUE) {
/*
* Special case - we did not start a
* kill timer on the asoc due to it
* was not closed. So go ahead and
* start it now.
*/
asoc->asoc.state &= ~SCTP_STATE_IN_ACCEPT_QUEUE;
sctp_timer_start(SCTP_TIMER_TYPE_ASOCKILL, inp, asoc, NULL);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_TCB_UNLOCK(asoc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
if (((SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_COOKIE_WAIT) ||
(SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_COOKIE_ECHOED)) &&
(asoc->asoc.total_output_queue_size == 0)) {
Back out last change to inpcb_free. Turns out we need to hold off freeing if there is data pending ... someone might do send/close. Which means we want the data to go and then close it after startup. Added comments to the code as well to note that this is done for a reason.
2007-06-17 19:27:46 +00:00
/*
* If we have data in queue, we don't want
* to just free since the app may have done,
* send()/close or connect/send/close. And
* it wants the data to get across first.
*/
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* Just abandon things in the front states */
if (sctp_free_assoc(inp, asoc, SCTP_PCBFREE_NOFORCE,
SCTP_FROM_SCTP_PCB + SCTP_LOC_2) == 0) {
cnt_in_sd++;
Back out last change to inpcb_free. Turns out we need to hold off freeing if there is data pending ... someone might do send/close. Which means we want the data to go and then close it after startup. Added comments to the code as well to note that this is done for a reason.
2007-06-17 19:27:46 +00:00
}
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Disconnect the socket please */
asoc->sctp_socket = NULL;
asoc->asoc.state |= SCTP_STATE_CLOSED_SOCKET;
if ((asoc->asoc.size_on_reasm_queue > 0) ||
(asoc->asoc.control_pdapi) ||
(asoc->asoc.size_on_all_streams > 0) ||
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
(so && (so->so_rcv.sb_cc > 0))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Left with Data unread */
struct mbuf *op_err;
op_err = sctp_get_mbuf_for_msg((sizeof(struct sctp_paramhdr) + sizeof(uint32_t)),
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
0, M_NOWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (op_err) {
/* Fill in the user initiated abort */
struct sctp_paramhdr *ph;
uint32_t *ippp;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(op_err) =
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_paramhdr) + sizeof(uint32_t);
ph = mtod(op_err,
struct sctp_paramhdr *);
ph->param_type = htons(
SCTP_CAUSE_USER_INITIATED_ABT);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
ph->param_length = htons(SCTP_BUF_LEN(op_err));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
ippp = (uint32_t *) (ph + 1);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
*ippp = htonl(SCTP_FROM_SCTP_PCB + SCTP_LOC_3);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
asoc->sctp_ep->last_abort_code = SCTP_FROM_SCTP_PCB + SCTP_LOC_3;
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
sctp_send_abort_tcb(asoc, op_err, SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_STAT_INCR_COUNTER32(sctps_aborted);
if ((SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_OPEN) ||
(SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_SHUTDOWN_RECEIVED)) {
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (sctp_free_assoc(inp, asoc,
SCTP_PCBFREE_NOFORCE, SCTP_FROM_SCTP_PCB + SCTP_LOC_4) == 0) {
cnt_in_sd++;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
} else if (TAILQ_EMPTY(&asoc->asoc.send_queue) &&
TAILQ_EMPTY(&asoc->asoc.sent_queue) &&
Whitespace change. MFC after: 3 days
2012-09-23 07:43:10 +00:00
(asoc->asoc.stream_queue_cnt == 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->asoc.locked_on_sending) {
goto abort_anyway;
}
if ((SCTP_GET_STATE(&asoc->asoc) != SCTP_STATE_SHUTDOWN_SENT) &&
(SCTP_GET_STATE(&asoc->asoc) != SCTP_STATE_SHUTDOWN_ACK_SENT)) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
struct sctp_nets *netp;
if (asoc->asoc.alternate) {
netp = asoc->asoc.alternate;
} else {
netp = asoc->asoc.primary_destination;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* there is nothing queued to send,
* so I send shutdown
*/
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
sctp_send_shutdown(asoc, netp);
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if ((SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_OPEN) ||
(SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_SHUTDOWN_RECEIVED)) {
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_SET_STATE(&asoc->asoc, SCTP_STATE_SHUTDOWN_SENT);
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
SCTP_CLEAR_SUBSTATE(&asoc->asoc, SCTP_STATE_SHUTDOWN_PENDING);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWN, asoc->sctp_ep, asoc,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWNGUARD, asoc->sctp_ep, asoc,
asoc->asoc.primary_destination);
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
sctp_chunk_output(inp, asoc, SCTP_OUTPUT_FROM_SHUT_TMR, SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
/* mark into shutdown pending */
struct sctp_stream_queue_pending *sp;
asoc->asoc.state |= SCTP_STATE_SHUTDOWN_PENDING;
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWNGUARD, asoc->sctp_ep, asoc,
asoc->asoc.primary_destination);
if (asoc->asoc.locked_on_sending) {
sp = TAILQ_LAST(&((asoc->asoc.locked_on_sending)->outqueue),
sctp_streamhead);
if (sp == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTP_PRINTF("Error, sp is NULL, locked on sending is %p strm:%d\n",
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
(void *)asoc->asoc.locked_on_sending,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->asoc.locked_on_sending->stream_no);
} else {
if ((sp->length == 0) && (sp->msg_is_complete == 0))
asoc->asoc.state |= SCTP_STATE_PARTIAL_MSG_LEFT;
}
}
if (TAILQ_EMPTY(&asoc->asoc.send_queue) &&
TAILQ_EMPTY(&asoc->asoc.sent_queue) &&
(asoc->asoc.state & SCTP_STATE_PARTIAL_MSG_LEFT)) {
struct mbuf *op_err;
abort_anyway:
op_err = sctp_get_mbuf_for_msg((sizeof(struct sctp_paramhdr) + sizeof(uint32_t)),
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
0, M_NOWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (op_err) {
/*
* Fill in the user
* initiated abort
*/
struct sctp_paramhdr *ph;
uint32_t *ippp;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(op_err) =
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
(sizeof(struct sctp_paramhdr) +
sizeof(uint32_t));
ph = mtod(op_err,
struct sctp_paramhdr *);
ph->param_type = htons(
SCTP_CAUSE_USER_INITIATED_ABT);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
ph->param_length = htons(SCTP_BUF_LEN(op_err));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
ippp = (uint32_t *) (ph + 1);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
*ippp = htonl(SCTP_FROM_SCTP_PCB + SCTP_LOC_5);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
asoc->sctp_ep->last_abort_code = SCTP_FROM_SCTP_PCB + SCTP_LOC_5;
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
sctp_send_abort_tcb(asoc, op_err, SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_STAT_INCR_COUNTER32(sctps_aborted);
if ((SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_OPEN) ||
(SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_SHUTDOWN_RECEIVED)) {
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (sctp_free_assoc(inp, asoc,
SCTP_PCBFREE_NOFORCE,
SCTP_FROM_SCTP_PCB + SCTP_LOC_6) == 0) {
cnt_in_sd++;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
} else {
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
sctp_chunk_output(inp, asoc, SCTP_OUTPUT_FROM_CLOSING, SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
cnt_in_sd++;
SCTP_TCB_UNLOCK(asoc);
}
/* now is there some left in our SHUTDOWN state? */
if (cnt_in_sd) {
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 2);
#endif
- When we close a socket with pending assoc's that are still shutting down, NULL out the socket pointer so we won't ever refer to a dead socket. Obtained from: Neil Wilson
2008-08-27 13:13:35 +00:00
inp->sctp_socket = NULL;
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
SCTP_INP_WUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
}
inp->sctp_socket = NULL;
if ((inp->sctp_flags & SCTP_PCB_FLAGS_UNBOUND) !=
SCTP_PCB_FLAGS_UNBOUND) {
/*
* ok, this guy has been bound. It's port is somewhere in
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
* the SCTP_BASE_INFO(hash table). Remove it!
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
LIST_REMOVE(inp, sctp_hash);
inp->sctp_flags |= SCTP_PCB_FLAGS_UNBOUND;
}
/*
* If there is a timer running to kill us, forget it, since it may
* have a contest on the INP lock.. which would cause us to die ...
*/
cnt = 0;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(asoc, &inp->sctp_asoc_list, sctp_tcblist, nasoc) {
Fix a locking issue reported by brucec@ affecting 1-to-1 style sockets which have not yet been accepted. MFC after: 3 days.
2010-11-13 12:52:44 +00:00
SCTP_TCB_LOCK(asoc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
Fix a bug in the sctp_inpcb_free. Basically if the socket was setup to do an abortive close an association that was in the accept_queue could get stuck and never freed. Now we properly start the kill timer on the socket and turn off the flag (same thing we do for the graceful close method). MFC after: 1 week
2010-06-06 16:09:12 +00:00
if (asoc->asoc.state & SCTP_STATE_IN_ACCEPT_QUEUE) {
asoc->asoc.state &= ~SCTP_STATE_IN_ACCEPT_QUEUE;
sctp_timer_start(SCTP_TIMER_TYPE_ASOCKILL, inp, asoc, NULL);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
cnt++;
Fix a locking issue reported by brucec@ affecting 1-to-1 style sockets which have not yet been accepted. MFC after: 3 days.
2010-11-13 12:52:44 +00:00
SCTP_TCB_UNLOCK(asoc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
/* Free associations that are NOT killing us */
if ((SCTP_GET_STATE(&asoc->asoc) != SCTP_STATE_COOKIE_WAIT) &&
((asoc->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) == 0)) {
struct mbuf *op_err;
uint32_t *ippp;
op_err = sctp_get_mbuf_for_msg((sizeof(struct sctp_paramhdr) + sizeof(uint32_t)),
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
0, M_NOWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (op_err) {
/* Fill in the user initiated abort */
struct sctp_paramhdr *ph;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(op_err) = (sizeof(struct sctp_paramhdr) +
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(uint32_t));
ph = mtod(op_err, struct sctp_paramhdr *);
ph->param_type = htons(
SCTP_CAUSE_USER_INITIATED_ABT);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
ph->param_length = htons(SCTP_BUF_LEN(op_err));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
ippp = (uint32_t *) (ph + 1);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
*ippp = htonl(SCTP_FROM_SCTP_PCB + SCTP_LOC_7);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
asoc->sctp_ep->last_abort_code = SCTP_FROM_SCTP_PCB + SCTP_LOC_7;
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
sctp_send_abort_tcb(asoc, op_err, SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_STAT_INCR_COUNTER32(sctps_aborted);
} else if (asoc->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) {
cnt++;
SCTP_TCB_UNLOCK(asoc);
continue;
}
if ((SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_OPEN) ||
(SCTP_GET_STATE(&asoc->asoc) == SCTP_STATE_SHUTDOWN_RECEIVED)) {
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (sctp_free_assoc(inp, asoc, SCTP_PCBFREE_FORCE, SCTP_FROM_SCTP_PCB + SCTP_LOC_8) == 0) {
cnt++;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (cnt) {
/* Ok we have someone out there that will kill us */
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&inp->sctp_ep.signature_change.timer);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 3);
#endif
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
SCTP_INP_WUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
1) Optimize the cleanup and don't always depend on the timer. This is done by considering the locks we will destroy and if they are contended we consider it the same as a reference count being up. Fixing this appears to cleanup another crash that was appearing with all the timers where the socket buf lock got corrupted. 2) Fix the sysctl code to take a lot more care when looking at INP's that are in the GONE or ALLGONE state. MFC after: 1 week
2010-06-06 20:34:17 +00:00
if (SCTP_INP_LOCK_CONTENDED(inp))
being_refed++;
if (SCTP_INP_READ_CONTENDED(inp))
being_refed++;
if (SCTP_ASOC_CREATE_LOCK_CONTENDED(inp))
being_refed++;
Ok, yet another bug in killing off all the hundreds of apitesters.. Basically we end up with attempting to destroy a lock thats contended on. A cookie echo arrives at the same time that the close is happening. The close gets the lock but the cookie echo has already passed the check for the gone flag and is then locked waiting on the create lock.. when we go to destroy it bam. For now we do the timer destroy for all calls to close.. We can probably optimize this later so that we check whats being contended on and if there is contention then do the timer thing. but this is probably safest since the inp has been removed from all lists and references and only the timer can find it.. once the locks are released all other places will instantly see the GONE flag and bail (thats what the change in sctp_input is one place that was lacking the bail code). MFC after: 1 week
2010-06-06 19:24:32 +00:00
if ((inp->refcount) ||
1) Optimize the cleanup and don't always depend on the timer. This is done by considering the locks we will destroy and if they are contended we consider it the same as a reference count being up. Fixing this appears to cleanup another crash that was appearing with all the timers where the socket buf lock got corrupted. 2) Fix the sysctl code to take a lot more care when looking at INP's that are in the GONE or ALLGONE state. MFC after: 1 week
2010-06-06 20:34:17 +00:00
(being_refed) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_CLOSE_IP)) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&inp->sctp_ep.signature_change.timer);
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 4);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_INPKILL, inp, NULL, NULL);
SCTP_INP_WUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
return;
}
inp->sctp_ep.signature_change.type = 0;
inp->sctp_flags |= SCTP_PCB_FLAGS_SOCKET_ALLGONE;
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
/*
* Remove it from the list .. last thing we need a lock for.
*/
LIST_REMOVE(inp, sctp_list);
SCTP_INP_WUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
/*
* Now we release all locks. Since this INP cannot be found anymore
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* except possibly by the kill timer that might be running. We call
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
* the drain function here. It should hit the case were it sees the
* ACTIVE flag cleared and exit out freeing us to proceed and
* destroy everything.
*/
if (from != SCTP_CALLED_FROM_INPKILL_TIMER) {
(void)SCTP_OS_TIMER_STOP_DRAIN(&inp->sctp_ep.signature_change.timer);
} else {
/* Probably un-needed */
(void)SCTP_OS_TIMER_STOP(&inp->sctp_ep.signature_change.timer);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 5);
#endif
Fix serveral bugs all having to do with freeing an sctp_inpcb: 1) Make sure not to remove the flag on the PCB until after the close() caller is back in control with the lock. Otherwise a quickly freeing assoc could kill the inpcb and cause a panic. 2) Make sure all calls to log_closing have not released the locks before calling the log function, we don't want the logging function to crash us due to a freed inpcb. 3) Make sure that when we get to the end, we release all locks (after removing them from view) and as long as we are NOT the inp-kill timer removing the inp, call the callout_drain() function so a racing timer won't later call in and cause a racing crash. MFC after: 1 week
2010-06-09 16:42:42 +00:00
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if ((inp->sctp_asocidhash) != NULL) {
SCTP_HASH_FREE(inp->sctp_asocidhash, inp->hashasocidmark);
inp->sctp_asocidhash = NULL;
}
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(sq, &inp->read_queue, next, nsq) {
- More work on making send lock contention. - Removed free-oqueue cache. - Fix counter for sq entries - Increased the amount of information retained on ASOC_TSN logging on the association. - Made it so with the ASOC_TSN logging on sending or recieving an abort we dump the log. - Went through and added invariant's around some panic's that needed them. - decrements went to atomic_subtact_int instead of add -1 - Removed residual count increment that threw off a strm oq count. - Tracks and complaints if we don't have a LAST fragment and clean up the sp structure. - Track a new stat that counts number of abandoned msgs that happen if you close without reading. - Fix lookup of frag point to be aware of a 0 assoc-id. Reviewed by: gnn
2007-04-19 11:28:43 +00:00
/* Its only abandoned if it had data left */
if (sq->length)
SCTP_STAT_INCR(sctps_left_abandon);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&inp->read_queue, sq, next);
sctp_free_remote_addr(sq->whoFrom);
if (so)
so->so_rcv.sb_cc -= sq->length;
if (sq->data) {
sctp_m_freem(sq->data);
sq->data = NULL;
}
/*
* no need to free the net count, since at this point all
* assoc's are gone.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_readq), sq);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_READQ_COUNT();
}
/* Now the sctp_pcb things */
/*
* free each asoc if it is not already closed/free. we can't use the
* macro here since le_next will get freed as part of the
* sctp_free_assoc() call.
*/
if (so) {
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#ifdef IPSEC
Unify ipsec[46]_delete_pcbpolicy in ipsec_delete_pcbpolicy. Ignoring different names because of macros (in6pcb, in6p_sp) and inp vs. in6p variable name both functions were entirely identical. Reviewed by: rwatson (as part of a larger changeset) MFC after: 6 weeks (*) (*) possibly need to leave a stub wrappers in 7 to keep the symbols.
2008-11-27 10:43:08 +00:00
ipsec_delete_pcbpolicy(ip_pcb);
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#endif /* IPSEC */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Unlocks not needed since the socket is gone now */
}
if (ip_pcb->inp_options) {
(void)sctp_m_free(ip_pcb->inp_options);
ip_pcb->inp_options = 0;
}
#ifdef INET6
if (ip_pcb->inp_vflag & INP_IPV6) {
struct in6pcb *in6p;
in6p = (struct in6pcb *)inp;
ip6_freepcbopts(in6p->in6p_outputopts);
}
#endif /* INET6 */
ip_pcb->inp_vflag = 0;
/* free up authentication fields */
if (inp->sctp_ep.local_auth_chunks != NULL)
sctp_free_chunklist(inp->sctp_ep.local_auth_chunks);
if (inp->sctp_ep.local_hmacs != NULL)
sctp_free_hmaclist(inp->sctp_ep.local_hmacs);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(shared_key, &inp->sctp_ep.shared_keys, next, nshared_key) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_REMOVE(shared_key, next);
sctp_free_sharedkey(shared_key);
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* if we have an address list the following will free the list of
* ifaddr's that are set into this ep. Again macro limitations here,
* since the LIST_FOREACH could be a bad idea.
*/
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(laddr, &inp->sctp_addr_list, sctp_nxt_addr, nladdr) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_remove_laddr(laddr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef SCTP_TRACK_FREED_ASOCS
/* TEMP CODE */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(asoc, &inp->sctp_asoc_free_list, sctp_tcblist, nasoc) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
LIST_REMOVE(asoc, sctp_tcblist);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asoc), asoc);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
SCTP_DECR_ASOC_COUNT();
}
/* *** END TEMP CODE *** */
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now lets see about freeing the EP hash table. */
if (inp->sctp_tcbhash != NULL) {
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
SCTP_HASH_FREE(inp->sctp_tcbhash, inp->sctp_hashmark);
inp->sctp_tcbhash = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Now we must put the ep memory back into the zone pool */
- Update the comment lines in sctp_input.c - We need to init the INP_LOCK since otherwise for non-SMP kernels you crash when you set the TOS.
2007-06-15 19:28:58 +00:00
INP_LOCK_DESTROY(&inp->ip_inp.inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_LOCK_DESTROY(inp);
SCTP_INP_READ_DESTROY(inp);
SCTP_ASOC_CREATE_LOCK_DESTROY(inp);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_ep), inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_EP_COUNT();
}
struct sctp_nets *
sctp_findnet(struct sctp_tcb *stcb, struct sockaddr *addr)
{
struct sctp_nets *net;
/* locate the address */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
if (sctp_cmpaddr(addr, (struct sockaddr *)&net->ro._l_addr))
return (net);
}
return (NULL);
}
int
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_is_address_on_local_host(struct sockaddr *addr, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *sctp_ifa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ifa = sctp_find_ifa_by_addr(addr, vrf_id, SCTP_ADDR_NOT_LOCKED);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifa) {
return (1);
} else {
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
/*
* add's a remote endpoint address, done with the INIT/INIT-ACK as well as
* when a ASCONF arrives that adds it. It will also initialize all the cwnd
* stats of stuff.
*/
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int
sctp_add_remote_addr(struct sctp_tcb *stcb, struct sockaddr *newaddr,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
struct sctp_nets **netp, int set_scope, int from)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* The following is redundant to the same lines in the
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
* sctp_aloc_assoc() but is needed since others call the add address
* function
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
struct sctp_nets *net, *netfirst;
int addr_inscope;
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Adding an address (from:%d) to the peer: ",
from);
SCTPDBG_ADDR(SCTP_DEBUG_PCB1, newaddr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
netfirst = sctp_findnet(stcb, newaddr);
if (netfirst) {
/*
* Lie and return ok, we don't want to make the association
* go away for this behavior. It will happen in the TCP
* model in a connected socket. It does not reach the hash
* table until after the association is built so it can't be
* found. Mark as reachable, since the initial creation will
* have been cleared and the NOT_IN_ASSOC flag will have
* been added... and we don't want to end up removing it
* back out.
*/
if (netfirst->dest_state & SCTP_ADDR_UNCONFIRMED) {
netfirst->dest_state = (SCTP_ADDR_REACHABLE |
SCTP_ADDR_UNCONFIRMED);
} else {
netfirst->dest_state = SCTP_ADDR_REACHABLE;
}
return (0);
}
addr_inscope = 1;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (newaddr->sa_family) {
#ifdef INET
case AF_INET:
{
struct sockaddr_in *sin;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
sin = (struct sockaddr_in *)newaddr;
if (sin->sin_addr.s_addr == 0) {
/* Invalid address */
return (-1);
}
/* zero out the bzero area */
memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
/* assure len is set */
sin->sin_len = sizeof(struct sockaddr_in);
if (set_scope) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_DONT_DO_PRIVADDR_SCOPE
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
stcb->ipv4_local_scope = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#else
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
if (IN4_ISPRIVATE_ADDRESS(&sin->sin_addr)) {
stcb->asoc.ipv4_local_scope = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#endif /* SCTP_DONT_DO_PRIVADDR_SCOPE */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
} else {
/* Validate the address is in scope */
if ((IN4_ISPRIVATE_ADDRESS(&sin->sin_addr)) &&
(stcb->asoc.ipv4_local_scope == 0)) {
addr_inscope = 0;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
#ifdef INET6
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET6:
{
struct sockaddr_in6 *sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
sin6 = (struct sockaddr_in6 *)newaddr;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/* Invalid address */
return (-1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
/* assure len is set */
sin6->sin6_len = sizeof(struct sockaddr_in6);
if (set_scope) {
if (sctp_is_address_on_local_host(newaddr, stcb->asoc.vrf_id)) {
stcb->asoc.loopback_scope = 1;
stcb->asoc.local_scope = 0;
stcb->asoc.ipv4_local_scope = 1;
stcb->asoc.site_scope = 1;
} else if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr)) {
/*
* If the new destination is a
* LINK_LOCAL we must have common
* site scope. Don't set the local
* scope since we may not share all
* links, only loopback can do this.
* Links on the local network would
* also be on our private network
* for v4 too.
*/
stcb->asoc.ipv4_local_scope = 1;
stcb->asoc.site_scope = 1;
} else if (IN6_IS_ADDR_SITELOCAL(&sin6->sin6_addr)) {
/*
* If the new destination is
* SITE_LOCAL then we must have site
* scope in common.
*/
stcb->asoc.site_scope = 1;
}
} else {
/* Validate the address is in scope */
if (IN6_IS_ADDR_LOOPBACK(&sin6->sin6_addr) &&
(stcb->asoc.loopback_scope == 0)) {
addr_inscope = 0;
} else if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr) &&
(stcb->asoc.local_scope == 0)) {
addr_inscope = 0;
} else if (IN6_IS_ADDR_SITELOCAL(&sin6->sin6_addr) &&
(stcb->asoc.site_scope == 0)) {
addr_inscope = 0;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
#endif
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* not supported family type */
return (-1);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
net = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_net), struct sctp_nets);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (net == NULL) {
return (-1);
}
SCTP_INCR_RADDR_COUNT();
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
bzero(net, sizeof(struct sctp_nets));
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_GETTIME_TIMEVAL(&net->start_time);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
memcpy(&net->ro._l_addr, newaddr, newaddr->sa_len);
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (newaddr->sa_family) {
#ifdef INET
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
((struct sockaddr_in *)&net->ro._l_addr)->sin_port = stcb->rport;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET6
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
((struct sockaddr_in6 *)&net->ro._l_addr)->sin6_port = stcb->rport;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
net->addr_is_local = sctp_is_address_on_local_host(newaddr, stcb->asoc.vrf_id);
if (net->addr_is_local && ((set_scope || (from == SCTP_ADDR_IS_CONFIRMED)))) {
stcb->asoc.loopback_scope = 1;
stcb->asoc.ipv4_local_scope = 1;
stcb->asoc.local_scope = 0;
stcb->asoc.site_scope = 1;
addr_inscope = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->failure_threshold = stcb->asoc.def_net_failure;
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
net->pf_threshold = stcb->asoc.def_net_pf_threshold;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (addr_inscope == 0) {
net->dest_state = (SCTP_ADDR_REACHABLE |
SCTP_ADDR_OUT_OF_SCOPE);
} else {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (from == SCTP_ADDR_IS_CONFIRMED)
/* SCTP_ADDR_IS_CONFIRMED is passed by connect_x */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->dest_state = SCTP_ADDR_REACHABLE;
else
net->dest_state = SCTP_ADDR_REACHABLE |
SCTP_ADDR_UNCONFIRMED;
}
- RTO was not being initialized to 0, thus the rtt calculation algoritm would not go through the proper initialization. - The initialization was incorrect as well, causing problems in sat networks with > 1sec RTT - Get rid of magic numbers in RTT calculations.
2007-06-08 10:57:11 +00:00
/*
* We set this to 0, the timer code knows that this means its an
* initial value
*/
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
net->rto_needed = 1;
- RTO was not being initialized to 0, thus the rtt calculation algoritm would not go through the proper initialization. - The initialization was incorrect as well, causing problems in sat networks with > 1sec RTT - Get rid of magic numbers in RTT calculations.
2007-06-08 10:57:11 +00:00
net->RTO = 0;
- Fixed cookie handling to calc an RTO when its an INIT collision case. - Fixed RTO calc to maintain a seperate variable to track if a RTO calc as been done, this allows the RTO var to be doubled during initial timeouts. - Reduces the amount of stack used by process control. - Use a constant for the peer chunk overhead. - Name change to spell candidate correctly.
2007-06-13 01:31:53 +00:00
net->RTO_measured = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.numnets++;
Add support for the SCTP_REMOTE_UDP_ENCAPS_PORT socket option. Retire the the now unused sctp_udp_tunneling_for_client_enable sysctl variable. MFC after: 3 months.
2011-11-20 15:00:45 +00:00
net->ref_count = 1;
Fixes to ECN in SCTP. 1) ECN was on an association basis, this is incorrect and will not work with CMT or for that matter if the user is sending to multiple addresses. This commit makes ECN on a per path basis. 2) Adopt the new format for the ECN internet draft. This also maintains compatability with old format chunks as well. 3) Keep track of the real time of a RTT down to micro seconds. For some future conditional features (for like a data center this is good information to have). MFC after: 1 month
2011-01-29 19:55:29 +00:00
net->cwr_window_tsn = net->last_cwr_tsn = stcb->asoc.sending_seq - 1;
Add support for the SCTP_REMOTE_UDP_ENCAPS_PORT socket option. Retire the the now unused sctp_udp_tunneling_for_client_enable sysctl variable. MFC after: 3 months.
2011-11-20 15:00:45 +00:00
net->port = stcb->asoc.port;
Add support for the spp_dscp field in the SCTP_PEER_ADDR_PARAMS socket option. Backwards compatibility is provided by still supporting the spp_ipv4_tos field. Approved by: re@ MFC after: 2 months.
2011-08-14 20:55:32 +00:00
net->dscp = stcb->asoc.default_dscp;
Fix the handling of the flowlabel and DSCP value in the SCTP_PEER_ADDR_PARAMS socket option. Honor the net.inet6.ip6.auto_flowlabel sysctl setting. Approved by: re (bz) MFC after: 1 month.
2011-09-14 08:15:21 +00:00
#ifdef INET6
Add support for the spp_dscp field in the SCTP_PEER_ADDR_PARAMS socket option. Backwards compatibility is provided by still supporting the spp_ipv4_tos field. Approved by: re@ MFC after: 2 months.
2011-08-14 20:55:32 +00:00
net->flowlabel = stcb->asoc.default_flowlabel;
Fix the handling of the flowlabel and DSCP value in the SCTP_PEER_ADDR_PARAMS socket option. Honor the net.inet6.ip6.auto_flowlabel sysctl setting. Approved by: re (bz) MFC after: 1 month.
2011-09-14 08:15:21 +00:00
#endif
Fix the enabling/disabling of Heartbeats and path MTU discovery when using the SCTP_PEER_ADDR_PARAMS socket option. Approved by: re MFC after: 1 month.
2011-09-17 08:50:29 +00:00
if (sctp_stcb_is_feature_on(stcb->sctp_ep, stcb, SCTP_PCB_FLAGS_DONOT_HEARTBEAT)) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
net->dest_state |= SCTP_ADDR_NOHB;
} else {
net->dest_state &= ~SCTP_ADDR_NOHB;
}
Fix the enabling/disabling of Heartbeats and path MTU discovery when using the SCTP_PEER_ADDR_PARAMS socket option. Approved by: re MFC after: 1 month.
2011-09-17 08:50:29 +00:00
if (sctp_stcb_is_feature_on(stcb->sctp_ep, stcb, SCTP_PCB_FLAGS_DO_NOT_PMTUD)) {
net->dest_state |= SCTP_ADDR_NO_PMTUD;
} else {
net->dest_state &= ~SCTP_ADDR_NO_PMTUD;
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
net->heart_beat_delay = stcb->asoc.heart_beat_delay;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Init the timer structure */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_OS_TIMER_INIT(&net->rxt_timer.timer);
SCTP_OS_TIMER_INIT(&net->pmtu_timer.timer);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
SCTP_OS_TIMER_INIT(&net->hb_timer.timer);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now generate a route for this guy */
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* KAME hack: embed scopeid */
if (newaddr->sa_family == AF_INET6) {
struct sockaddr_in6 *sin6;
sin6 = (struct sockaddr_in6 *)&net->ro._l_addr;
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
(void)sa6_embedscope(sin6, MODULE_GLOBAL(ip6_use_defzone));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin6->sin6_scope_id = 0;
}
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
SCTP_RTALLOC((sctp_route_t *) & net->ro, stcb->asoc.vrf_id);
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (SCTP_ROUTE_HAS_VALID_IFN(&net->ro)) {
/* Get source address */
net->ro._s_addr = sctp_source_address_selection(stcb->sctp_ep,
stcb,
(sctp_route_t *) & net->ro,
net,
0,
stcb->asoc.vrf_id);
/* Now get the interface MTU */
if (net->ro._s_addr && net->ro._s_addr->ifn_p) {
net->mtu = SCTP_GATHER_MTU_FROM_INTFC(net->ro._s_addr->ifn_p);
}
Set the MTU of an path to an approriate value if the interface MTU can't be determined. MFC after: 3 days.
2011-11-15 20:41:50 +00:00
if (net->mtu > 0) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
uint32_t rmtu;
rmtu = SCTP_GATHER_MTU_FROM_ROUTE(net->ro._s_addr, &net->ro._l_addr.sa, net->ro.ro_rt);
if (rmtu == 0) {
/*
* Start things off to match mtu of
* interface please.
*/
SCTP_SET_MTU_OF_ROUTE(&net->ro._l_addr.sa,
net->ro.ro_rt, net->mtu);
} else {
/*
* we take the route mtu over the interface,
* since the route may be leading out the
* loopback, or a different interface.
*/
net->mtu = rmtu;
}
}
Set the MTU of an path to an approriate value if the interface MTU can't be determined. MFC after: 3 days.
2011-11-15 20:41:50 +00:00
}
if (net->mtu == 0) {
switch (newaddr->sa_family) {
#ifdef INET
case AF_INET:
net->mtu = SCTP_DEFAULT_MTU;
break;
#endif
#ifdef INET6
case AF_INET6:
net->mtu = 1280;
break;
#endif
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Set the MTU of an path to an approriate value if the interface MTU can't be determined. MFC after: 3 days.
2011-11-15 20:41:50 +00:00
}
if (net->port) {
net->mtu -= (uint32_t) sizeof(struct udphdr);
}
if (from == SCTP_ALLOC_ASOC) {
stcb->asoc.smallest_mtu = net->mtu;
}
if (stcb->asoc.smallest_mtu > net->mtu) {
stcb->asoc.smallest_mtu = net->mtu;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
#ifdef INET6
if (newaddr->sa_family == AF_INET6) {
struct sockaddr_in6 *sin6;
sin6 = (struct sockaddr_in6 *)&net->ro._l_addr;
(void)sa6_recoverscope(sin6);
}
#endif
Set the MTU of an path to an approriate value if the interface MTU can't be determined. MFC after: 3 days.
2011-11-15 20:41:50 +00:00
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
/* JRS - Use the congestion control given in the CC module */
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_set_initial_cc_param != NULL)
(*stcb->asoc.cc_functions.sctp_set_initial_cc_param) (stcb, net);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT: CUC algo - set find_pseudo_cumack to TRUE (1) at beginning
* of assoc (2005/06/27, iyengar@cis.udel.edu)
*/
net->find_pseudo_cumack = 1;
net->find_rtx_pseudo_cumack = 1;
net->src_addr_selected = 0;
Fix bugs related to M_FLOWID: * Store the flowid when receiving an SCTP/IPv6 packet. * Store the flowid when receiving an SCTP packet with wrong CRC. * Initilize flowid correctly. * Put test code under INVARIANTS. MFC after: 3 months.
2011-02-07 15:04:23 +00:00
/* Choose an initial flowid. */
net->flowid = stcb->asoc.my_vtag ^
ntohs(stcb->rport) ^
ntohs(stcb->sctp_ep->sctp_lport);
#ifdef INVARIANTS
net->flowidset = 1;
#endif
When add a new remote address using sctp_add_remote_addr(), return the correct net if requested. MFC after: 3 days.
2011-10-27 22:38:48 +00:00
if (netp) {
*netp = net;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
netfirst = TAILQ_FIRST(&stcb->asoc.nets);
if (net->ro.ro_rt == NULL) {
/* Since we have no route put it at the back */
TAILQ_INSERT_TAIL(&stcb->asoc.nets, net, sctp_next);
} else if (netfirst == NULL) {
/* We are the first one in the pool. */
TAILQ_INSERT_HEAD(&stcb->asoc.nets, net, sctp_next);
} else if (netfirst->ro.ro_rt == NULL) {
/*
* First one has NO route. Place this one ahead of the first
* one.
*/
TAILQ_INSERT_HEAD(&stcb->asoc.nets, net, sctp_next);
} else if (net->ro.ro_rt->rt_ifp != netfirst->ro.ro_rt->rt_ifp) {
/*
* This one has a different interface than the one at the
* top of the list. Place it ahead.
*/
TAILQ_INSERT_HEAD(&stcb->asoc.nets, net, sctp_next);
} else {
/*
* Ok we have the same interface as the first one. Move
* forward until we find either a) one with a NULL route...
* insert ahead of that b) one with a different ifp.. insert
* after that. c) end of the list.. insert at the tail.
*/
struct sctp_nets *netlook;
do {
netlook = TAILQ_NEXT(netfirst, sctp_next);
if (netlook == NULL) {
/* End of the list */
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
TAILQ_INSERT_TAIL(&stcb->asoc.nets, net, sctp_next);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
} else if (netlook->ro.ro_rt == NULL) {
/* next one has NO route */
TAILQ_INSERT_BEFORE(netfirst, net, sctp_next);
break;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
} else if (netlook->ro.ro_rt->rt_ifp != net->ro.ro_rt->rt_ifp) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_INSERT_AFTER(&stcb->asoc.nets, netlook,
net, sctp_next);
break;
}
/* Shift forward */
netfirst = netlook;
} while (netlook != NULL);
}
/* got to have a primary set */
if (stcb->asoc.primary_destination == 0) {
stcb->asoc.primary_destination = net;
} else if ((stcb->asoc.primary_destination->ro.ro_rt == NULL) &&
(net->ro.ro_rt) &&
((net->dest_state & SCTP_ADDR_UNCONFIRMED) == 0)) {
/* No route to current primary adopt new primary */
stcb->asoc.primary_destination = net;
}
/* Validate primary is first */
net = TAILQ_FIRST(&stcb->asoc.nets);
if ((net != stcb->asoc.primary_destination) &&
(stcb->asoc.primary_destination)) {
/*
* first one on the list is NOT the primary sctp_cmpaddr()
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* is much more efficient if the primary is the first on the
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* list, make it so.
*/
TAILQ_REMOVE(&stcb->asoc.nets,
stcb->asoc.primary_destination, sctp_next);
TAILQ_INSERT_HEAD(&stcb->asoc.nets,
stcb->asoc.primary_destination, sctp_next);
}
return (0);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
static uint32_t
sctp_aloc_a_assoc_id(struct sctp_inpcb *inp, struct sctp_tcb *stcb)
{
uint32_t id;
struct sctpasochead *head;
struct sctp_tcb *lstcb;
Fixes two bugs: 1) A lock issue, if we ever had to try again we would double lock the INP lock. 2) We were allowing (at wrap) associd 0... which really we cannot allow since 0 normally means in most socket API calls that we are wishing to effect something on the INP not TCB. MFC after: 1 week
2009-09-13 17:45:31 +00:00
SCTP_INP_WLOCK(inp);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
try_again:
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
/* TSNH */
Fixes two bugs: 1) A lock issue, if we ever had to try again we would double lock the INP lock. 2) We were allowing (at wrap) associd 0... which really we cannot allow since 0 normally means in most socket API calls that we are wishing to effect something on the INP not TCB. MFC after: 1 week
2009-09-13 17:45:31 +00:00
SCTP_INP_WUNLOCK(inp);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
return (0);
}
Fixes two bugs: 1) A lock issue, if we ever had to try again we would double lock the INP lock. 2) We were allowing (at wrap) associd 0... which really we cannot allow since 0 normally means in most socket API calls that we are wishing to effect something on the INP not TCB. MFC after: 1 week
2009-09-13 17:45:31 +00:00
/*
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
* We don't allow assoc id to be one of SCTP_FUTURE_ASSOC,
* SCTP_CURRENT_ASSOC and SCTP_ALL_ASSOC.
Fixes two bugs: 1) A lock issue, if we ever had to try again we would double lock the INP lock. 2) We were allowing (at wrap) associd 0... which really we cannot allow since 0 normally means in most socket API calls that we are wishing to effect something on the INP not TCB. MFC after: 1 week
2009-09-13 17:45:31 +00:00
*/
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
if (inp->sctp_associd_counter <= SCTP_ALL_ASSOC) {
inp->sctp_associd_counter = SCTP_ALL_ASSOC + 1;
Fixes two bugs: 1) A lock issue, if we ever had to try again we would double lock the INP lock. 2) We were allowing (at wrap) associd 0... which really we cannot allow since 0 normally means in most socket API calls that we are wishing to effect something on the INP not TCB. MFC after: 1 week
2009-09-13 17:45:31 +00:00
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
id = inp->sctp_associd_counter;
inp->sctp_associd_counter++;
lstcb = sctp_findasoc_ep_asocid_locked(inp, (sctp_assoc_t) id, 0);
if (lstcb) {
goto try_again;
}
head = &inp->sctp_asocidhash[SCTP_PCBHASH_ASOC(id, inp->hashasocidmark)];
LIST_INSERT_HEAD(head, stcb, sctp_tcbasocidhash);
stcb->asoc.in_asocid_hash = 1;
SCTP_INP_WUNLOCK(inp);
return id;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* allocate an association and add it to the endpoint. The caller must be
* careful to add all additional addresses once they are know right away or
* else the assoc will be may experience a blackout scenario.
*/
struct sctp_tcb *
sctp_aloc_assoc(struct sctp_inpcb *inp, struct sockaddr *firstaddr,
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
int *error, uint32_t override_tag, uint32_t vrf_id,
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
struct thread *p
)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
/* note the p argument is only valid in unbound sockets */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tcb *stcb;
struct sctp_association *asoc;
struct sctpasochead *head;
uint16_t rport;
int err;
/*
* Assumption made here: Caller has done a
* sctp_findassociation_ep_addr(ep, addr's); to make sure the
* address does not exist already.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_INFO(ipi_count_asoc) >= SCTP_MAX_NUM_OF_ASOC) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Hit max assoc, sorry no more */
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, ENOBUFS);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*error = ENOBUFS;
return (NULL);
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (firstaddr == NULL) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
*error = EINVAL;
return (NULL);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_RLOCK(inp);
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if ((inp->sctp_flags & SCTP_PCB_FLAGS_IN_TCPPOOL) &&
((sctp_is_feature_off(inp, SCTP_PCB_FLAGS_PORTREUSE)) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* If its in the TCP pool, its NOT allowed to create an
* association. The parent listener needs to call
* sctp_aloc_assoc.. or the one-2-many socket. If a peeled
* off, or connected one does this.. its an error.
*/
SCTP_INP_RUNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*error = EINVAL;
return (NULL);
}
Ensure that 1-to-1 style SCTP sockets can only be connected once. Allow implicit setup also for 1-to-1 style sockets as described in the latest version of the socket API ID. Approved by: re MFC after: 1 month
2011-09-14 19:10:13 +00:00
if ((inp->sctp_flags & SCTP_PCB_FLAGS_IN_TCPPOOL) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_TCPTYPE)) {
if ((inp->sctp_flags & SCTP_PCB_FLAGS_WAS_CONNECTED) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_WAS_ABORTED)) {
SCTP_INP_RUNLOCK(inp);
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
*error = EINVAL;
return (NULL);
}
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB3, "Allocate an association for peer:");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_DEBUG
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (firstaddr) {
SCTPDBG_ADDR(SCTP_DEBUG_PCB3, firstaddr);
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (firstaddr->sa_family) {
#ifdef INET
case AF_INET:
SCTPDBG(SCTP_DEBUG_PCB3, "Port:%d\n",
ntohs(((struct sockaddr_in *)firstaddr)->sin_port));
break;
#endif
#ifdef INET6
case AF_INET6:
SCTPDBG(SCTP_DEBUG_PCB3, "Port:%d\n",
ntohs(((struct sockaddr_in6 *)firstaddr)->sin6_port));
break;
#endif
default:
break;
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
} else {
SCTPDBG(SCTP_DEBUG_PCB3, "None\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
#endif /* SCTP_DEBUG */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (firstaddr->sa_family) {
#ifdef INET
case AF_INET:
{
struct sockaddr_in *sin;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
sin = (struct sockaddr_in *)firstaddr;
Make sure that SCTP rejects broadcast, multicast and wildcard addresses as remote addresses. Approved by: re MFC after: 1 month.
2011-09-15 08:49:54 +00:00
if ((ntohs(sin->sin_port) == 0) ||
(sin->sin_addr.s_addr == INADDR_ANY) ||
(sin->sin_addr.s_addr == INADDR_BROADCAST) ||
IN_MULTICAST(ntohl(sin->sin_addr.s_addr))) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
/* Invalid address */
SCTP_INP_RUNLOCK(inp);
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
*error = EINVAL;
return (NULL);
}
rport = sin->sin_port;
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
#ifdef INET6
case AF_INET6:
{
struct sockaddr_in6 *sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
sin6 = (struct sockaddr_in6 *)firstaddr;
Make sure that SCTP rejects broadcast, multicast and wildcard addresses as remote addresses. Approved by: re MFC after: 1 month.
2011-09-15 08:49:54 +00:00
if ((ntohs(sin6->sin6_port) == 0) ||
IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr) ||
IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
/* Invalid address */
SCTP_INP_RUNLOCK(inp);
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
*error = EINVAL;
return (NULL);
}
rport = sin6->sin6_port;
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* not supported family type */
SCTP_INP_RUNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*error = EINVAL;
return (NULL);
}
SCTP_INP_RUNLOCK(inp);
if (inp->sctp_flags & SCTP_PCB_FLAGS_UNBOUND) {
/*
* If you have not performed a bind, then we need to do the
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* ephemeral bind for you.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
if ((err = sctp_inpcb_bind(inp->sctp_socket,
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
(struct sockaddr *)NULL,
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
(struct sctp_ifa *)NULL,
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
p
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
))) {
/* bind error, probably perm */
*error = err;
return (NULL);
}
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
stcb = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_asoc), struct sctp_tcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb == NULL) {
/* out of memory? */
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, ENOMEM);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*error = ENOMEM;
return (NULL);
}
SCTP_INCR_ASOC_COUNT();
bzero(stcb, sizeof(*stcb));
asoc = &stcb->asoc;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
asoc->assoc_id = sctp_aloc_a_assoc_id(inp, stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_TCB_LOCK_INIT(stcb);
SCTP_TCB_SEND_LOCK_INIT(stcb);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
stcb->rport = rport;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* setup back pointer's */
stcb->sctp_ep = inp;
stcb->sctp_socket = inp->sctp_socket;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
if ((err = sctp_init_asoc(inp, stcb, override_tag, vrf_id))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* failed */
SCTP_TCB_LOCK_DESTROY(stcb);
SCTP_TCB_SEND_LOCK_DESTROY(stcb);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
LIST_REMOVE(stcb, sctp_tcbasocidhash);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asoc), stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_ASOC_COUNT();
*error = err;
return (NULL);
}
/* and the port */
SCTP_INP_INFO_WLOCK();
SCTP_INP_WLOCK(inp);
if (inp->sctp_flags & (SCTP_PCB_FLAGS_SOCKET_GONE | SCTP_PCB_FLAGS_SOCKET_ALLGONE)) {
/* inpcb freed while alloc going on */
SCTP_TCB_LOCK_DESTROY(stcb);
SCTP_TCB_SEND_LOCK_DESTROY(stcb);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
LIST_REMOVE(stcb, sctp_tcbasocidhash);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asoc), stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_WUNLOCK(inp);
SCTP_INP_INFO_WUNLOCK();
SCTP_DECR_ASOC_COUNT();
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*error = EINVAL;
return (NULL);
}
SCTP_TCB_LOCK(stcb);
/* now that my_vtag is set, add it to the hash */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
head = &SCTP_BASE_INFO(sctp_asochash)[SCTP_PCBHASH_ASOC(stcb->asoc.my_vtag, SCTP_BASE_INFO(hashasocmark))];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* put it in the bucket in the vtag hash of assoc's for the system */
LIST_INSERT_HEAD(head, stcb, sctp_asocs);
SCTP_INP_INFO_WUNLOCK();
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if ((err = sctp_add_remote_addr(stcb, firstaddr, NULL, SCTP_DO_SETSCOPE, SCTP_ALLOC_ASOC))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* failure.. memory error? */
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
if (asoc->strmout) {
SCTP_FREE(asoc->strmout, SCTP_M_STRMO);
asoc->strmout = NULL;
}
if (asoc->mapping_array) {
SCTP_FREE(asoc->mapping_array, SCTP_M_MAP);
asoc->mapping_array = NULL;
}
Fix a small memory leak from the nr-sack code - the mapping array was not being freed at term of association. Also get rid of the MICHAELS_EXP code.
2009-05-30 10:56:27 +00:00
if (asoc->nr_mapping_array) {
SCTP_FREE(asoc->nr_mapping_array, SCTP_M_MAP);
asoc->nr_mapping_array = NULL;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_ASOC_COUNT();
SCTP_TCB_LOCK_DESTROY(stcb);
SCTP_TCB_SEND_LOCK_DESTROY(stcb);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
LIST_REMOVE(stcb, sctp_tcbasocidhash);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asoc), stcb);
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
SCTP_INP_WUNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP_PCB, ENOBUFS);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*error = ENOBUFS;
return (NULL);
}
/* Init all the timers */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_OS_TIMER_INIT(&asoc->dack_timer.timer);
SCTP_OS_TIMER_INIT(&asoc->strreset_timer.timer);
SCTP_OS_TIMER_INIT(&asoc->asconf_timer.timer);
SCTP_OS_TIMER_INIT(&asoc->shut_guard_timer.timer);
SCTP_OS_TIMER_INIT(&asoc->autoclose_timer.timer);
SCTP_OS_TIMER_INIT(&asoc->delayed_event_timer.timer);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
SCTP_OS_TIMER_INIT(&asoc->delete_prim_timer.timer);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_INSERT_HEAD(&inp->sctp_asoc_list, stcb, sctp_tcblist);
/* now file the port under the hash as well */
if (inp->sctp_tcbhash != NULL) {
head = &inp->sctp_tcbhash[SCTP_PCBHASH_ALLADDR(stcb->rport,
inp->sctp_hashmark)];
LIST_INSERT_HEAD(head, stcb, sctp_tcbhash);
}
SCTP_INP_WUNLOCK(inp);
Using %p in a format string requires a void *. MFC after: 10 days
2012-09-05 18:52:01 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Association %p now allocated\n", (void *)stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (stcb);
}
void
sctp_remove_net(struct sctp_tcb *stcb, struct sctp_nets *net)
{
struct sctp_association *asoc;
asoc = &stcb->asoc;
asoc->numnets--;
TAILQ_REMOVE(&asoc->nets, net, sctp_next);
if (net == asoc->primary_destination) {
/* Reset primary */
struct sctp_nets *lnet;
lnet = TAILQ_FIRST(&asoc->nets);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/*
* Mobility adaptation Ideally, if deleted destination is
* the primary, it becomes a fast retransmission trigger by
* the subsequent SET PRIMARY. (by micchie)
*/
if (sctp_is_mobility_feature_on(stcb->sctp_ep,
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
SCTP_MOBILITY_BASE) ||
sctp_is_mobility_feature_on(stcb->sctp_ep,
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
SCTP_MOBILITY_FASTHANDOFF)) {
SCTPDBG(SCTP_DEBUG_ASCONF1, "remove_net: primary dst is deleting\n");
if (asoc->deleted_primary != NULL) {
SCTPDBG(SCTP_DEBUG_ASCONF1, "remove_net: deleted primary may be already stored\n");
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
goto out;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
asoc->deleted_primary = net;
atomic_add_int(&net->ref_count, 1);
- Bug fix managing congestion parameter on immediate retransmittion by handover event (fast mobility code) - Fixed problem of mobility code which is caused by remaining parameters in the deleted primary destination. - Add a missing lock. When a peer sends an INIT, and while we are processing it to send an INIT-ACK the socket is closed, we did not hold a lock to keep the socket from going away. Add protection for this case. - Fix so that arwnd is alway uses the minimal rwnd if the user has set the socket buffer smaller. Found this when the test org decided to see what happens when you set in a rwnd of 10 bytes (which is not allowed per RFC .. 4k is minimum). - Fixes so a cookie-echo ootb will NOT cause an abort to be sent. This was happening in a MPI collision case. - Examined all panics and unless there was no recovery, moved any that were not already to INVARANTS. Approved by: re@freebsd.org (gnn)
2007-10-01 03:22:29 +00:00
memset(&net->lastsa, 0, sizeof(net->lastsa));
memset(&net->lastsv, 0, sizeof(net->lastsv));
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_mobility_feature_on(stcb->sctp_ep,
SCTP_MOBILITY_PRIM_DELETED);
sctp_timer_start(SCTP_TIMER_TYPE_PRIM_DELETED,
stcb->sctp_ep, stcb, NULL);
}
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
out:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Try to find a confirmed primary */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
asoc->primary_destination = sctp_find_alternate_net(stcb, lnet, 0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (net == asoc->last_data_chunk_from) {
/* Reset primary */
asoc->last_data_chunk_from = TAILQ_FIRST(&asoc->nets);
}
if (net == asoc->last_control_chunk_from) {
/* Clear net */
asoc->last_control_chunk_from = NULL;
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (net == stcb->asoc.alternate) {
sctp_free_remote_addr(stcb->asoc.alternate);
stcb->asoc.alternate = NULL;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_free_remote_addr(net);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* remove a remote endpoint address from an association, it will fail if the
* address does not exist.
*/
int
sctp_del_remote_addr(struct sctp_tcb *stcb, struct sockaddr *remaddr)
{
/*
* Here we need to remove a remote address. This is quite simple, we
* first find it in the list of address for the association
* (tasoc->asoc.nets) and then if it is there, we do a LIST_REMOVE
* on that item. Note we do not allow it to be removed if there are
* no other addresses.
*/
struct sctp_association *asoc;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_nets *net, *nnet;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc = &stcb->asoc;
/* locate the address */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(net, &asoc->nets, sctp_next, nnet) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (net->ro._l_addr.sa.sa_family != remaddr->sa_family) {
continue;
}
if (sctp_cmpaddr((struct sockaddr *)&net->ro._l_addr,
remaddr)) {
/* we found the guy */
if (asoc->numnets < 2) {
/* Must have at LEAST two remote addresses */
return (-1);
} else {
sctp_remove_net(stcb, net);
return (0);
}
}
}
/* not found. */
return (-2);
}
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
void
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_delete_from_timewait(uint32_t tag, uint16_t lport, uint16_t rport)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
{
struct sctpvtaghead *chain;
struct sctp_tagblock *twait_block;
int found = 0;
int i;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
chain = &SCTP_BASE_INFO(vtag_timewait)[(tag % SCTP_STACK_VTAG_HASH_SIZE)];
Use always LIST_EMPTY instead of sometime SCTP_LIST_EMPTY, which is defined as LIST_EMPTY. Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 20:56:14 +00:00
if (!LIST_EMPTY(chain)) {
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
LIST_FOREACH(twait_block, chain, sctp_nxt_tagblock) {
for (i = 0; i < SCTP_NUMBER_IN_VTAG_BLOCK; i++) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if ((twait_block->vtag_block[i].v_tag == tag) &&
(twait_block->vtag_block[i].lport == lport) &&
(twait_block->vtag_block[i].rport == rport)) {
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
twait_block->vtag_block[i].tv_sec_at_expire = 0;
twait_block->vtag_block[i].v_tag = 0;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
twait_block->vtag_block[i].lport = 0;
twait_block->vtag_block[i].rport = 0;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
found = 1;
break;
}
}
if (found)
break;
}
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
int
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_is_in_timewait(uint32_t tag, uint16_t lport, uint16_t rport)
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
{
struct sctpvtaghead *chain;
struct sctp_tagblock *twait_block;
int found = 0;
int i;
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
SCTP_INP_INFO_WLOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
chain = &SCTP_BASE_INFO(vtag_timewait)[(tag % SCTP_STACK_VTAG_HASH_SIZE)];
Use always LIST_EMPTY instead of sometime SCTP_LIST_EMPTY, which is defined as LIST_EMPTY. Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 20:56:14 +00:00
if (!LIST_EMPTY(chain)) {
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
LIST_FOREACH(twait_block, chain, sctp_nxt_tagblock) {
for (i = 0; i < SCTP_NUMBER_IN_VTAG_BLOCK; i++) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if ((twait_block->vtag_block[i].v_tag == tag) &&
(twait_block->vtag_block[i].lport == lport) &&
(twait_block->vtag_block[i].rport == rport)) {
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
found = 1;
break;
}
}
if (found)
break;
}
}
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
SCTP_INP_INFO_WUNLOCK();
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
return (found);
}
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
void
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_add_vtag_to_timewait(uint32_t tag, uint32_t time, uint16_t lport, uint16_t rport)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctpvtaghead *chain;
struct sctp_tagblock *twait_block;
struct timeval now;
int set, i;
Adds missing sysctl to manage the vtag_time_wait time. This will even allow disabling time-wait all together if you set the value to 0 (not advisable actually). The default remains the same i.e. 60 seconds.
2009-05-30 11:14:41 +00:00
if (time == 0) {
/* Its disabled */
return;
}
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_GETTIME_TIMEVAL(&now);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
chain = &SCTP_BASE_INFO(vtag_timewait)[(tag % SCTP_STACK_VTAG_HASH_SIZE)];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
set = 0;
Use always LIST_EMPTY instead of sometime SCTP_LIST_EMPTY, which is defined as LIST_EMPTY. Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 20:56:14 +00:00
if (!LIST_EMPTY(chain)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Block(s) present, lets find space, and expire on the fly */
LIST_FOREACH(twait_block, chain, sctp_nxt_tagblock) {
for (i = 0; i < SCTP_NUMBER_IN_VTAG_BLOCK; i++) {
if ((twait_block->vtag_block[i].v_tag == 0) &&
!set) {
twait_block->vtag_block[i].tv_sec_at_expire =
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
now.tv_sec + time;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
twait_block->vtag_block[i].v_tag = tag;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
twait_block->vtag_block[i].lport = lport;
twait_block->vtag_block[i].rport = rport;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
set = 1;
} else if ((twait_block->vtag_block[i].v_tag) &&
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
((long)twait_block->vtag_block[i].tv_sec_at_expire < now.tv_sec)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Audit expires this guy */
twait_block->vtag_block[i].tv_sec_at_expire = 0;
twait_block->vtag_block[i].v_tag = 0;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
twait_block->vtag_block[i].lport = 0;
twait_block->vtag_block[i].rport = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (set == 0) {
/* Reuse it for my new tag */
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
twait_block->vtag_block[i].tv_sec_at_expire = now.tv_sec + time;
twait_block->vtag_block[i].v_tag = tag;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
twait_block->vtag_block[i].lport = lport;
twait_block->vtag_block[i].rport = rport;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
set = 1;
}
}
}
if (set) {
/*
* We only do up to the block where we can
* place our tag for audits
*/
break;
}
}
}
/* Need to add a new block to chain */
if (!set) {
SCTP_MALLOC(twait_block, struct sctp_tagblock *,
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
sizeof(struct sctp_tagblock), SCTP_M_TIMW);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (twait_block == NULL) {
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
#ifdef INVARIANTS
panic("Can not alloc tagblock");
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
memset(twait_block, 0, sizeof(struct sctp_tagblock));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_INSERT_HEAD(chain, twait_block, sctp_nxt_tagblock);
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
twait_block->vtag_block[0].tv_sec_at_expire = now.tv_sec + time;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
twait_block->vtag_block[0].v_tag = tag;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
twait_block->vtag_block[0].lport = lport;
twait_block->vtag_block[0].rport = rport;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
/*-
* Free the association after un-hashing the remote port. This
* function ALWAYS returns holding NO LOCK on the stcb. It DOES
* expect that the input to this function IS a locked TCB.
* It will return 0, if it did NOT destroy the association (instead
* it unlocks it. It will return NON-zero if it either destroyed the
* association OR the association is already destroyed.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
int
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
sctp_free_assoc(struct sctp_inpcb *inp, struct sctp_tcb *stcb, int from_inpcbfree, int from_location)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
int i;
struct sctp_association *asoc;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_nets *net, *nnet;
struct sctp_laddr *laddr, *naddr;
struct sctp_tmit_chunk *chk, *nchk;
struct sctp_asconf_addr *aparam, *naparam;
struct sctp_asconf_ack *aack, *naack;
struct sctp_stream_reset_list *strrst, *nstrrst;
struct sctp_queued_to_read *sq, *nsq;
struct sctp_stream_queue_pending *sp, *nsp;
sctp_sharedkey_t *shared_key, *nshared_key;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct socket *so;
/* first, lets purge the entry from the hash table. */
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, stcb, 6);
#endif
if (stcb->asoc.state == 0) {
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 7);
#endif
/* there is no asoc, really TSNH :-0 */
return (1);
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (stcb->asoc.alternate) {
sctp_free_remote_addr(stcb->asoc.alternate);
stcb->asoc.alternate = NULL;
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
/* TEMP CODE */
if (stcb->freed_from_where == 0) {
/* Only record the first place free happened from */
stcb->freed_from_where = from_location;
}
/* TEMP CODE */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc = &stcb->asoc;
if ((inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE))
/* nothing around */
so = NULL;
else
so = inp->sctp_socket;
/*
* We used timer based freeing if a reader or writer is in the way.
* So we first check if we are actually being called from a timer,
* if so we abort early if a reader or writer is still in the way.
*/
if ((stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) &&
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
(from_inpcbfree == SCTP_NORMAL_PROC)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* is it the timer driving us? if so are the reader/writers
* gone?
*/
if (stcb->asoc.refcnt) {
/* nope, reader or writer in the way */
sctp_timer_start(SCTP_TIMER_TYPE_ASOCKILL, inp, stcb, NULL);
/* no asoc destroyed */
SCTP_TCB_UNLOCK(stcb);
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, stcb, 8);
#endif
return (0);
}
}
/* now clean up any other timers */
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->dack_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
asoc->dack_timer.self = NULL;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->strreset_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
/*-
* For stream reset we don't blast this unless
* it is a str-reset timer, it might be the
* free-asoc timer which we DON'T want to
* disturb.
*/
if (asoc->strreset_timer.type == SCTP_TIMER_TYPE_STRRESET)
asoc->strreset_timer.self = NULL;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->asconf_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
asoc->asconf_timer.self = NULL;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->autoclose_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
asoc->autoclose_timer.self = NULL;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->shut_guard_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
asoc->shut_guard_timer.self = NULL;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->delayed_event_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
asoc->delayed_event_timer.self = NULL;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/* Mobility adaptation */
(void)SCTP_OS_TIMER_STOP(&asoc->delete_prim_timer.timer);
asoc->delete_prim_timer.self = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&net->rxt_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
net->rxt_timer.self = NULL;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&net->pmtu_timer.timer);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
net->pmtu_timer.self = NULL;
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
(void)SCTP_OS_TIMER_STOP(&net->hb_timer.timer);
net->hb_timer.self = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
/* Now the read queue needs to be cleaned up (only once) */
if ((stcb->asoc.state & SCTP_STATE_ABOUT_TO_BE_FREED) == 0) {
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
stcb->asoc.state |= SCTP_STATE_ABOUT_TO_BE_FREED;
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
SCTP_INP_READ_LOCK(inp);
TAILQ_FOREACH(sq, &inp->read_queue, next) {
if (sq->stcb == stcb) {
sq->do_not_ref_stcb = 1;
sq->sinfo_cumtsn = stcb->asoc.cumulative_tsn;
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
/*
* If there is no end, there never will be
* now.
*/
if (sq->end_added == 0) {
/* Held for PD-API clear that. */
sq->pdapi_aborted = 1;
sq->held_length = 0;
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
if (sctp_stcb_is_feature_on(inp, stcb, SCTP_PCB_FLAGS_PDAPIEVNT) && (so != NULL)) {
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
/*
* Need to add a PD-API
* aborted indication.
* Setting the control_pdapi
* assures that it will be
* added right after this
* msg.
*/
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave.
2007-04-22 11:06:27 +00:00
uint32_t strseq;
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
stcb->asoc.control_pdapi = sq;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave.
2007-04-22 11:06:27 +00:00
strseq = (sq->sinfo_stream << 16) | sq->sinfo_ssn;
* Fix a bug where PR-SCTP settings are ignore when using implicit association setup. * Fix a bug where message with illegal stream ids are not deleted. * Fix a crash when reporting back unsent messages from the send_queue. * Fix a bug related to INIT retransmission when the socket is already closed. * Fix a bug where associations were stalled when partial delivery API was enabled. * Fix a bug where the receive buffer size was smaller than the partial_delivery_point. Approved by: re, rrs (mentor) MFC after: One day.
2009-08-15 21:10:52 +00:00
sctp_ulp_notify(SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION,
stcb,
SCTP_PARTIAL_DELIVERY_ABORTED,
(void *)&strseq,
SCTP_SO_LOCKED);
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
stcb->asoc.control_pdapi = NULL;
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
}
}
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
/* Add an end to wake them */
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
sq->end_added = 1;
}
}
SCTP_INP_READ_UNLOCK(inp);
if (stcb->block_entry) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, stcb, NULL, SCTP_FROM_SCTP_PCB, ECONNRESET);
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
stcb->block_entry->error = ECONNRESET;
stcb->block_entry = NULL;
}
}
This fixes a bug with the one-2-one model socket when a user sets up a socket to a server sends data and closes the socket before the server has called accept(). It used to NOT work at all. Now we add a flag to the assoc and defer assoc cleanup so that the accept will suceed.
2010-05-11 17:02:29 +00:00
if ((stcb->asoc.refcnt) || (stcb->asoc.state & SCTP_STATE_IN_ACCEPT_QUEUE)) {
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
/*
This fixes a bug with the one-2-one model socket when a user sets up a socket to a server sends data and closes the socket before the server has called accept(). It used to NOT work at all. Now we add a flag to the assoc and defer assoc cleanup so that the accept will suceed.
2010-05-11 17:02:29 +00:00
* Someone holds a reference OR the socket is unaccepted
* yet.
This changes tracks down the EEOR->NonEEOR mode failure to wakeup on close of the sender. It basically moves the return (when the asoc has a reader/writer) further down and gets the wakeup and assoc appending (of the PD-API event) moved up before the return. It also moves the flag set right before the return so we can assure only once adding the PD-API events. Approved by: gnn
2006-11-06 14:34:21 +00:00
*/
This fixes a bug in the close up of a socket that had un-accepted assoc's. Basically the assoc (and inp) would get stuck and never get cleaned up. MFC after: 1 week
2010-06-05 21:17:23 +00:00
if ((stcb->asoc.refcnt) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE)) {
stcb->asoc.state &= ~SCTP_STATE_IN_ACCEPT_QUEUE;
This fixes a bug with the one-2-one model socket when a user sets up a socket to a server sends data and closes the socket before the server has called accept(). It used to NOT work at all. Now we add a flag to the assoc and defer assoc cleanup so that the accept will suceed.
2010-05-11 17:02:29 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_ASOCKILL, inp, stcb, NULL);
This fixes a bug in the close up of a socket that had un-accepted assoc's. Basically the assoc (and inp) would get stuck and never get cleaned up. MFC after: 1 week
2010-06-05 21:17:23 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_TCB_UNLOCK(stcb);
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
if ((inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE))
/* nothing around */
so = NULL;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (so) {
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
/* Wake any reader/writers */
sctp_sorwakeup(inp, so);
sctp_sowwakeup(inp, so);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, stcb, 9);
#endif
/* no asoc destroyed */
return (0);
}
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, stcb, 10);
#endif
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
/*
* When I reach here, no others want to kill the assoc yet.. and I
* own the lock. Now its possible an abort comes in when I do the
* lock exchange below to grab all the locks to do the final take
* out. to prevent this we increment the count, which will start a
* timer and blow out above thus assuring us that we hold exclusive
* killing of the asoc. Note that after getting back the TCB lock we
* will go ahead and increment the counter back up and stop any
* timer a passing stranger may have started :-S
*/
if (from_inpcbfree == SCTP_NORMAL_PROC) {
atomic_add_int(&stcb->asoc.refcnt, 1);
SCTP_TCB_UNLOCK(stcb);
SCTP_INP_INFO_WLOCK();
SCTP_INP_WLOCK(inp);
SCTP_TCB_LOCK(stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
/* Double check the GONE flag */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE))
/* nothing around */
so = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((inp->sctp_flags & SCTP_PCB_FLAGS_TCPTYPE) ||
(inp->sctp_flags & SCTP_PCB_FLAGS_IN_TCPPOOL)) {
/*
* For TCP type we need special handling when we are
* connected. We also include the peel'ed off ones to.
*/
if (inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED) {
inp->sctp_flags &= ~SCTP_PCB_FLAGS_CONNECTED;
inp->sctp_flags |= SCTP_PCB_FLAGS_WAS_CONNECTED;
if (so) {
SOCK_LOCK(so);
if (so->so_rcv.sb_cc == 0) {
so->so_state &= ~(SS_ISCONNECTING |
SS_ISDISCONNECTING |
SS_ISCONFIRMING |
SS_ISCONNECTED);
}
Fix so we call socantrcvmore_locked so we don't see a race where we unlock to call the non-locked version and have the socket go away. MFC after: 1 week
2010-06-07 04:01:38 +00:00
socantrcvmore_locked(so);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_sowwakeup(inp, so);
sctp_sorwakeup(inp, so);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
SCTP_SOWAKEUP(so);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
/*
* Make it invalid too, that way if its about to run it will abort
* and return.
*/
/* re-increment the lock */
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (from_inpcbfree == SCTP_NORMAL_PROC) {
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, -1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
* Fix a bug where the length of the ASCONF-ACK was calculated wrong due to using an uninitialized variable. * Fix a bug where a NULL pointer was dereferenced when interfaces come and go at a high rate. * Fix a bug where inps where not deregistered from iterators. * Fix a race condition in freeing an association. * Fix a refcount problem related to the iterator. Each of the above bug results in a panic. It shows up when interfaces come and go at a high rate. Obtained from: rrs (partly) MFC after: 3 days
2010-06-14 21:25:07 +00:00
if (stcb->asoc.refcnt) {
stcb->asoc.state &= ~SCTP_STATE_IN_ACCEPT_QUEUE;
sctp_timer_start(SCTP_TIMER_TYPE_ASOCKILL, inp, stcb, NULL);
if (from_inpcbfree == SCTP_NORMAL_PROC) {
SCTP_INP_INFO_WUNLOCK();
SCTP_INP_WUNLOCK(inp);
}
SCTP_TCB_UNLOCK(stcb);
return (0);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->state = 0;
if (inp->sctp_tcbhash) {
LIST_REMOVE(stcb, sctp_tcbhash);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (stcb->asoc.in_asocid_hash) {
LIST_REMOVE(stcb, sctp_tcbasocidhash);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Now lets remove it from the list of ALL associations in the EP */
LIST_REMOVE(stcb, sctp_tcblist);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (from_inpcbfree == SCTP_NORMAL_PROC) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INCR_REF(inp);
SCTP_INP_WUNLOCK(inp);
}
/* pull from vtag hash */
LIST_REMOVE(stcb, sctp_asocs);
Adds missing sysctl to manage the vtag_time_wait time. This will even allow disabling time-wait all together if you set the value to 0 (not advisable actually). The default remains the same i.e. 60 seconds.
2009-05-30 11:14:41 +00:00
sctp_add_vtag_to_timewait(asoc->my_vtag, SCTP_BASE_SYSCTL(sctp_vtag_time_wait),
inp->sctp_lport, stcb->rport);
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
/*
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
* Now restop the timers to be sure this is paranoia at is finest!
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
*/
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&asoc->strreset_timer.timer);
(void)SCTP_OS_TIMER_STOP(&asoc->dack_timer.timer);
(void)SCTP_OS_TIMER_STOP(&asoc->strreset_timer.timer);
(void)SCTP_OS_TIMER_STOP(&asoc->asconf_timer.timer);
(void)SCTP_OS_TIMER_STOP(&asoc->shut_guard_timer.timer);
(void)SCTP_OS_TIMER_STOP(&asoc->autoclose_timer.timer);
(void)SCTP_OS_TIMER_STOP(&asoc->delayed_event_timer.timer);
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&net->rxt_timer.timer);
(void)SCTP_OS_TIMER_STOP(&net->pmtu_timer.timer);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
(void)SCTP_OS_TIMER_STOP(&net->hb_timer.timer);
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
}
asoc->strreset_timer.type = SCTP_TIMER_TYPE_NONE;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* The chunk lists and such SHOULD be empty but we check them just
* in case.
*/
/* anything on the wheel needs to be removed */
for (i = 0; i < asoc->streamoutcnt; i++) {
struct sctp_stream_out *outs;
outs = &asoc->strmout[i];
/* now clean up any chunks here */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(sp, &outs->outqueue, next, nsp) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&outs->outqueue, sp, next);
Fix a refcount bug when freeing an association. While there: Change code to be consistent. Discussed with rrs@. MFC after: 3 days
2012-07-17 13:03:47 +00:00
sctp_free_spbufspace(stcb, asoc, sp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (sp->data) {
Make sure that we report chunks if a socket still exists that were not sent. In either case carefully remove the data if it does not get taken by the reporting routines. MFC after: 2 weeks
2010-07-26 09:22:52 +00:00
if (so) {
/* Still an open socket - report */
sctp_ulp_notify(SCTP_NOTIFY_SPECIAL_SP_FAIL, stcb,
Provide in the SCTP_SEND_FAILED and SCTP_SEND_FAILED_EVENT notifications the correct ssf_error or ssfe_error as required by RFC 6458. MFC after: 3 days
2012-05-13 19:32:49 +00:00
0, (void *)sp, SCTP_SO_LOCKED);
Make sure that we report chunks if a socket still exists that were not sent. In either case carefully remove the data if it does not get taken by the reporting routines. MFC after: 2 weeks
2010-07-26 09:22:52 +00:00
}
if (sp->data) {
sctp_m_freem(sp->data);
sp->data = NULL;
sp->tail_mbuf = NULL;
Fix a refcount bug when freeing an association. While there: Change code to be consistent. Discussed with rrs@. MFC after: 3 days
2012-07-17 13:03:47 +00:00
sp->length = 0;
Make sure that we report chunks if a socket still exists that were not sent. In either case carefully remove the data if it does not get taken by the reporting routines. MFC after: 2 weeks
2010-07-26 09:22:52 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Delay the assignment of a path for DATA chunk until they hit the sent_queue. Honor a given path when the SCTP_ADDR_OVER flag is set. MFC after: 2 weeks.
2010-09-15 23:10:45 +00:00
if (sp->net) {
sctp_free_remote_addr(sp->net);
sp->net = NULL;
}
Fix a refcount bug when freeing an association. While there: Change code to be consistent. Discussed with rrs@. MFC after: 3 days
2012-07-17 13:03:47 +00:00
sctp_free_a_strmoq(stcb, sp, SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(strrst, &asoc->resetHead, next_resp, nstrrst) {
TAILQ_REMOVE(&asoc->resetHead, strrst, next_resp);
SCTP_FREE(strrst, SCTP_M_STRESET);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(sq, &asoc->pending_reply_queue, next, nsq) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&asoc->pending_reply_queue, sq, next);
if (sq->data) {
sctp_m_freem(sq->data);
sq->data = NULL;
}
sctp_free_remote_addr(sq->whoFrom);
sq->whoFrom = NULL;
sq->stcb = NULL;
/* Free the ctl entry */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_readq), sq);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_READQ_COUNT();
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(chk, &asoc->free_chunks, sctp_next, nchk) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&asoc->free_chunks, chk, sctp_next);
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (chk->holds_key_ref)
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(stcb, chk->auth_keyid, SCTP_SO_LOCKED);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_chunk), chk);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_CHK_COUNT();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
atomic_subtract_int(&SCTP_BASE_INFO(ipi_free_chunks), 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->free_chunk_cnt--;
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* pending send queue SHOULD be empty */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(chk, &asoc->send_queue, sctp_next, nchk) {
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
if (asoc->strmout[chk->rec.data.stream_number].chunks_on_queues > 0) {
asoc->strmout[chk->rec.data.stream_number].chunks_on_queues--;
#ifdef INVARIANTS
} else {
panic("No chunks on the queues for sid %u.", chk->rec.data.stream_number);
#endif
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_REMOVE(&asoc->send_queue, chk, sctp_next);
if (chk->data) {
if (so) {
/* Still a socket? */
Provide in the SCTP_SEND_FAILED and SCTP_SEND_FAILED_EVENT notifications the correct ssf_error or ssfe_error as required by RFC 6458. MFC after: 3 days
2012-05-13 19:32:49 +00:00
sctp_ulp_notify(SCTP_NOTIFY_UNSENT_DG_FAIL, stcb,
0, chk, SCTP_SO_LOCKED);
Delay the assignment of a path for DATA chunk until they hit the sent_queue. Honor a given path when the SCTP_ADDR_OVER flag is set. MFC after: 2 weeks.
2010-09-15 23:10:45 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (chk->data) {
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_m_freem(chk->data);
chk->data = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
}
if (chk->holds_key_ref)
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(stcb, chk->auth_keyid, SCTP_SO_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
if (chk->whoTo) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_free_remote_addr(chk->whoTo);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
chk->whoTo = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_chunk), chk);
SCTP_DECR_CHK_COUNT();
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
/* sent queue SHOULD be empty */
TAILQ_FOREACH_SAFE(chk, &asoc->sent_queue, sctp_next, nchk) {
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
if (chk->sent != SCTP_DATAGRAM_NR_ACKED) {
Add per outgoing stream accounting for chunks in the send and sent queue. This provides no functional change, but is a preparation for an upcoming stream reset improvement. Done with rrs@. MFC after: 1 week
2012-11-07 22:11:38 +00:00
if (asoc->strmout[chk->rec.data.stream_number].chunks_on_queues > 0) {
asoc->strmout[chk->rec.data.stream_number].chunks_on_queues--;
#ifdef INVARIANTS
} else {
panic("No chunks on the queues for sid %u.", chk->rec.data.stream_number);
#endif
}
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_REMOVE(&asoc->sent_queue, chk, sctp_next);
if (chk->data) {
if (so) {
/* Still a socket? */
Provide in the SCTP_SEND_FAILED and SCTP_SEND_FAILED_EVENT notifications the correct ssf_error or ssfe_error as required by RFC 6458. MFC after: 3 days
2012-05-13 19:32:49 +00:00
sctp_ulp_notify(SCTP_NOTIFY_SENT_DG_FAIL, stcb,
0, chk, SCTP_SO_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
}
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
if (chk->holds_key_ref)
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(stcb, chk->auth_keyid, SCTP_SO_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_free_remote_addr(chk->whoTo);
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_chunk), chk);
SCTP_DECR_CHK_COUNT();
/* sa_ignore FREED_MEMORY */
}
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
#ifdef INVARIANTS
for (i = 0; i < stcb->asoc.streamoutcnt; i++) {
if (stcb->asoc.strmout[i].chunks_on_queues > 0) {
panic("%u chunks left for stream %u.", stcb->asoc.strmout[i].chunks_on_queues, i);
}
}
#endif
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
/* control queue MAY not be empty */
TAILQ_FOREACH_SAFE(chk, &asoc->control_send_queue, sctp_next, nchk) {
TAILQ_REMOVE(&asoc->control_send_queue, chk, sctp_next);
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
}
if (chk->holds_key_ref)
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(stcb, chk->auth_keyid, SCTP_SO_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_free_remote_addr(chk->whoTo);
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_chunk), chk);
SCTP_DECR_CHK_COUNT();
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
/* ASCONF queue MAY not be empty */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(chk, &asoc->asconf_send_queue, sctp_next, nchk) {
TAILQ_REMOVE(&asoc->asconf_send_queue, chk, sctp_next);
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
if (chk->holds_key_ref)
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(stcb, chk->auth_keyid, SCTP_SO_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_free_remote_addr(chk->whoTo);
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_chunk), chk);
SCTP_DECR_CHK_COUNT();
/* sa_ignore FREED_MEMORY */
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(chk, &asoc->reasmqueue, sctp_next, nchk) {
TAILQ_REMOVE(&asoc->reasmqueue, chk, sctp_next);
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
if (chk->holds_key_ref)
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(stcb, chk->auth_keyid, SCTP_SO_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_free_remote_addr(chk->whoTo);
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_chunk), chk);
SCTP_DECR_CHK_COUNT();
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->mapping_array) {
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(asoc->mapping_array, SCTP_M_MAP);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->mapping_array = NULL;
}
Fix a small memory leak from the nr-sack code - the mapping array was not being freed at term of association. Also get rid of the MICHAELS_EXP code.
2009-05-30 10:56:27 +00:00
if (asoc->nr_mapping_array) {
SCTP_FREE(asoc->nr_mapping_array, SCTP_M_MAP);
asoc->nr_mapping_array = NULL;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* the stream outs */
if (asoc->strmout) {
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(asoc->strmout, SCTP_M_STRMO);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->strmout = NULL;
}
Add the add-stream capability. Still needs more testing.. MFC after: 1 month
2009-02-20 15:03:54 +00:00
asoc->strm_realoutsize = asoc->streamoutcnt = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->strmin) {
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_queued_to_read *ctl, *nctl;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
for (i = 0; i < asoc->streamincnt; i++) {
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(ctl, &asoc->strmin[i].inqueue, next, nctl) {
TAILQ_REMOVE(&asoc->strmin[i].inqueue, ctl, next);
sctp_free_remote_addr(ctl->whoFrom);
if (ctl->data) {
sctp_m_freem(ctl->data);
ctl->data = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
/*
* We don't free the address here since all
* the net's were freed above.
*/
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_readq), ctl);
SCTP_DECR_READQ_COUNT();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(asoc->strmin, SCTP_M_STRMI);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->strmin = NULL;
}
asoc->streamincnt = 0;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(net, &asoc->nets, sctp_next, nnet) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef INVARIANTS
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
if (SCTP_BASE_INFO(ipi_count_raddr) == 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
panic("no net's left alloc'ed, or list points to itself");
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&asoc->nets, net, sctp_next);
sctp_free_remote_addr(net);
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(laddr, &asoc->sctp_restricted_addrs, sctp_nxt_addr, naddr) {
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_remove_laddr(laddr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* pending asconf (address) parameters */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(aparam, &asoc->asconf_queue, next, naparam) {
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&asoc->asconf_queue, aparam, next);
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(aparam, SCTP_M_ASC_ADDR);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(aack, &asoc->asconf_ack_sent, next, naack) {
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/* sa_ignore FREED_MEMORY */
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
TAILQ_REMOVE(&asoc->asconf_ack_sent, aack, next);
if (aack->data != NULL) {
sctp_m_freem(aack->data);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asconf_ack), aack);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* clean up auth stuff */
if (asoc->local_hmacs)
sctp_free_hmaclist(asoc->local_hmacs);
if (asoc->peer_hmacs)
sctp_free_hmaclist(asoc->peer_hmacs);
if (asoc->local_auth_chunks)
sctp_free_chunklist(asoc->local_auth_chunks);
if (asoc->peer_auth_chunks)
sctp_free_chunklist(asoc->peer_auth_chunks);
sctp_free_authinfo(&asoc->authinfo);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(shared_key, &asoc->shared_keys, next, nshared_key) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_REMOVE(shared_key, next);
sctp_free_sharedkey(shared_key);
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Insert new items here :> */
/* Get rid of LOCK */
SCTP_TCB_LOCK_DESTROY(stcb);
SCTP_TCB_SEND_LOCK_DESTROY(stcb);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (from_inpcbfree == SCTP_NORMAL_PROC) {
SCTP_INP_INFO_WUNLOCK();
SCTP_INP_RLOCK(inp);
}
#ifdef SCTP_TRACK_FREED_ASOCS
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE) {
/* now clean up the tasoc itself */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asoc), stcb);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
SCTP_DECR_ASOC_COUNT();
} else {
LIST_INSERT_HEAD(&inp->sctp_asoc_free_list, stcb, sctp_tcblist);
}
#else
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_asoc), stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_ASOC_COUNT();
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#endif
if (from_inpcbfree == SCTP_NORMAL_PROC) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (inp->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE) {
/*
* If its NOT the inp_free calling us AND sctp_close
* as been called, we call back...
*/
SCTP_INP_RUNLOCK(inp);
/*
* This will start the kill timer (if we are the
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
* last one) since we hold an increment yet. But
* this is the only safe way to do this since
* otherwise if the socket closes at the same time
* we are here we might collide in the cleanup.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- Get rid of the sctp_inpcb_free() "magic numbers", now they are sensible defines that tell what you are directing the function to do.
2007-05-08 15:53:03 +00:00
sctp_inpcb_free(inp,
SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE,
SCTP_CALLED_DIRECTLY_NOCMPSET);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_DECR_REF(inp);
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
goto out_of;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
/* The socket is still open. */
SCTP_INP_DECR_REF(inp);
}
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (from_inpcbfree == SCTP_NORMAL_PROC) {
SCTP_INP_RUNLOCK(inp);
}
out_of:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* destroyed the asoc */
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 11);
#endif
return (1);
}
/*
* determine if a destination is "reachable" based upon the addresses bound
* to the current endpoint (e.g. only v4 or v6 currently bound)
*/
/*
* FIX: if we allow assoc-level bindx(), then this needs to be fixed to use
* assoc level v4/v6 flags, as the assoc *may* not have the same address
* types bound as its endpoint
*/
int
sctp_destination_is_reachable(struct sctp_tcb *stcb, struct sockaddr *destaddr)
{
struct sctp_inpcb *inp;
int answer;
/*
* No locks here, the TCB, in all cases is already locked and an
* assoc is up. There is either a INP lock by the caller applied (in
* asconf case when deleting an address) or NOT in the HB case,
* however if HB then the INP increment is up and the INP will not
* be removed (on top of the fact that we have a TCB lock). So we
* only want to read the sctp_flags, which is either bound-all or
* not.. no protection needed since once an assoc is up you can't be
* changing your binding.
*/
inp = stcb->sctp_ep;
if (inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) {
/* if bound all, destination is not restricted */
/*
* RRS: Question during lock work: Is this correct? If you
* are bound-all you still might need to obey the V4--V6
* flags??? IMO this bound-all stuff needs to be removed!
*/
return (1);
}
/* NOTE: all "scope" checks are done when local addresses are added */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (destaddr->sa_family) {
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#ifdef INET6
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
answer = inp->ip_inp.inp.inp_vflag & INP_IPV6;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#endif
#ifdef INET
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
answer = inp->ip_inp.inp.inp_vflag & INP_IPV4;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#endif
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
default:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* invalid family, so it's unreachable */
answer = 0;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
return (answer);
}
/*
* update the inp_vflags on an endpoint
*/
static void
sctp_update_ep_vflag(struct sctp_inpcb *inp)
{
struct sctp_laddr *laddr;
/* first clear the flag */
inp->ip_inp.inp.inp_vflag = 0;
/* set the flag based on addresses on the ep list */
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == NULL) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "%s: NULL ifa\n",
__FUNCTION__);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa->localifa_flags & SCTP_BEING_DELETED) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (laddr->ifa->address.sa.sa_family) {
#ifdef INET6
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->ip_inp.inp.inp_vflag |= INP_IPV6;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->ip_inp.inp.inp_vflag |= INP_IPV4;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
/*
* Add the address to the endpoint local address list There is nothing to be
* done if we are bound to all addresses
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
void
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_add_local_addr_ep(struct sctp_inpcb *inp, struct sctp_ifa *ifa, uint32_t action)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_laddr *laddr;
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
int fnd, error = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
fnd = 0;
if (inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) {
/* You are already bound to all. You have it already */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET6
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->address.sa.sa_family == AF_INET6) {
if (ifa->localifa_flags & SCTP_ADDR_IFA_UNUSEABLE) {
/* Can't bind a non-useable addr. */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* first, is it already present? */
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == ifa) {
fnd = 1;
break;
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (fnd == 0) {
/* Not in the ep list */
error = sctp_insert_laddr(&inp->sctp_addr_list, ifa, action);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (error != 0)
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->laddr_count++;
/* update inp_vflag flags */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (ifa->address.sa.sa_family) {
#ifdef INET6
case AF_INET6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->ip_inp.inp.inp_vflag |= INP_IPV6;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET and INET6 consistently. This also fixes a bug, where it was done wrong. MFC after: 3 days
2012-07-15 11:04:49 +00:00
#ifdef INET
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
case AF_INET:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
inp->ip_inp.inp.inp_vflag |= INP_IPV4;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* select a new (hopefully reachable) destination net (should only be used
* when we deleted an ep addr that is the only usable source address to reach
* the destination net)
*/
static void
sctp_select_primary_destination(struct sctp_tcb *stcb)
{
struct sctp_nets *net;
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
/* for now, we'll just pick the first reachable one we find */
if (net->dest_state & SCTP_ADDR_UNCONFIRMED)
continue;
if (sctp_destination_is_reachable(stcb,
(struct sockaddr *)&net->ro._l_addr)) {
/* found a reachable destination */
stcb->asoc.primary_destination = net;
}
}
/* I can't there from here! ...we're gonna die shortly... */
}
/*
* Delete the address from the endpoint local address list There is nothing
* to be done if we are bound to all addresses
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
void
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_del_local_addr_ep(struct sctp_inpcb *inp, struct sctp_ifa *ifa)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_laddr *laddr;
int fnd;
fnd = 0;
if (inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) {
/* You are already bound to all. You have it already */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == ifa) {
fnd = 1;
break;
}
}
if (fnd && (inp->laddr_count < 2)) {
/* can't delete unless there are at LEAST 2 addresses */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (fnd) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* clean up any use of this address go through our
* associations and clear any last_used_address that match
* this one for each assoc, see if a new primary_destination
* is needed
*/
struct sctp_tcb *stcb;
/* clean up "next_addr_touse" */
if (inp->next_addr_touse == laddr)
/* delete this address */
inp->next_addr_touse = NULL;
/* clean up "last_used_address" */
LIST_FOREACH(stcb, &inp->sctp_asoc_list, sctp_tcblist) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_nets *net;
SCTP_TCB_LOCK(stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.last_used_address == laddr)
/* delete this address */
stcb->asoc.last_used_address = NULL;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
* Now spin through all the nets and purge any ref
* to laddr
*/
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
if (net->ro._s_addr &&
(net->ro._s_addr->ifa == laddr->ifa)) {
/* Yep, purge src address selected */
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
sctp_rtentry_t *rt;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* delete this address if cached */
rt = net->ro.ro_rt;
if (rt != NULL) {
RTFREE(rt);
net->ro.ro_rt = NULL;
}
sctp_free_ifa(net->ro._s_addr);
net->ro._s_addr = NULL;
net->src_addr_selected = 0;
}
}
SCTP_TCB_UNLOCK(stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} /* for each tcb */
/* remove it from the ep list */
sctp_remove_laddr(laddr);
inp->laddr_count--;
/* update inp_vflag flags */
sctp_update_ep_vflag(inp);
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
* Add the address to the TCB local address restricted list.
* This is a "pending" address list (eg. addresses waiting for an
* ASCONF-ACK response) and cannot be used as a valid source address.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
void
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
sctp_add_local_addr_restricted(struct sctp_tcb *stcb, struct sctp_ifa *ifa)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_laddr *laddr;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctpladdr *list;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* Assumes TCB is locked.. and possibly the INP. May need to
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* confirm/fix that if we need it and is not the case.
*/
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
list = &stcb->asoc.sctp_restricted_addrs;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET6
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->address.sa.sa_family == AF_INET6) {
if (ifa->localifa_flags & SCTP_ADDR_IFA_UNUSEABLE) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Can't bind a non-existent addr. */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* does the address already exist? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_FOREACH(laddr, list, sctp_nxt_addr) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (laddr->ifa == ifa) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
/* add to the list */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
(void)sctp_insert_laddr(list, ifa, 0);
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* insert an laddr entry with the given ifa for the desired list
*/
int
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_insert_laddr(struct sctpladdr *list, struct sctp_ifa *ifa, uint32_t act)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_laddr *laddr;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
laddr = SCTP_ZONE_GET(SCTP_BASE_INFO(ipi_zone_laddr), struct sctp_laddr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (laddr == NULL) {
/* out of memory? */
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(NULL, NULL, NULL, SCTP_FROM_SCTP_PCB, EINVAL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EINVAL);
}
SCTP_INCR_LADDR_COUNT();
bzero(laddr, sizeof(*laddr));
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
(void)SCTP_GETTIME_TIMEVAL(&laddr->start_time);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
laddr->ifa = ifa;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
laddr->action = act;
atomic_add_int(&ifa->refcount, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* insert it */
LIST_INSERT_HEAD(list, laddr, sctp_nxt_addr);
return (0);
}
/*
* Remove an laddr entry from the local address list (on an assoc)
*/
void
sctp_remove_laddr(struct sctp_laddr *laddr)
{
/* remove from the list */
LIST_REMOVE(laddr, sctp_nxt_addr);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_free_ifa(laddr->ifa);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_laddr), laddr);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_LADDR_COUNT();
}
/*
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
* Remove a local address from the TCB local address restricted list
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
void
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
sctp_del_local_addr_restricted(struct sctp_tcb *stcb, struct sctp_ifa *ifa)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_inpcb *inp;
struct sctp_laddr *laddr;
/*
* This is called by asconf work. It is assumed that a) The TCB is
* locked and b) The INP is locked. This is true in as much as I can
* trace through the entry asconf code where I did these locks.
* Again, the ASCONF code is a bit different in that it does lock
* the INP during its work often times. This must be since we don't
* want other proc's looking up things while what they are looking
* up is changing :-D
*/
inp = stcb->sctp_ep;
/* if subset bound and don't allow ASCONF's, can't delete last */
if (((inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) == 0) &&
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_is_feature_off(inp, SCTP_PCB_FLAGS_DO_ASCONF)) {
if (stcb->sctp_ep->laddr_count < 2) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* can't delete last address */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_FOREACH(laddr, &stcb->asoc.sctp_restricted_addrs, sctp_nxt_addr) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* remove the address if it exists */
if (laddr->ifa == NULL)
continue;
if (laddr->ifa == ifa) {
sctp_remove_laddr(laddr);
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
/* address not found! */
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* Temporarily remove for __APPLE__ until we use the Tiger equivalents
*/
/* sysctl */
static int sctp_max_number_of_assoc = SCTP_MAX_NUM_OF_ASOC;
static int sctp_scale_up_for_address = SCTP_SCALE_FOR_ADDR;
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
#if defined(__FreeBSD__) && defined(SCTP_MCORE_INPUT) && defined(SMP)
struct sctp_mcore_ctrl *sctp_mcore_workers = NULL;
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
int *sctp_cpuarry = NULL;
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
void
sctp_queue_to_mcore(struct mbuf *m, int off, int cpu_to_use)
{
/* Queue a packet to a processor for the specified core */
struct sctp_mcore_queue *qent;
struct sctp_mcore_ctrl *wkq;
int need_wake = 0;
if (sctp_mcore_workers == NULL) {
/* Something went way bad during setup */
sctp_input_with_port(m, off, 0);
return;
}
SCTP_MALLOC(qent, struct sctp_mcore_queue *,
(sizeof(struct sctp_mcore_queue)),
SCTP_M_MCORE);
if (qent == NULL) {
/* This is trouble */
sctp_input_with_port(m, off, 0);
return;
}
qent->vn = curvnet;
qent->m = m;
qent->off = off;
qent->v6 = 0;
wkq = &sctp_mcore_workers[cpu_to_use];
SCTP_MCORE_QLOCK(wkq);
TAILQ_INSERT_TAIL(&wkq->que, qent, next);
if (wkq->running == 0) {
need_wake = 1;
}
SCTP_MCORE_QUNLOCK(wkq);
if (need_wake) {
wakeup(&wkq->running);
}
}
static void
sctp_mcore_thread(void *arg)
{
struct sctp_mcore_ctrl *wkq;
struct sctp_mcore_queue *qent;
wkq = (struct sctp_mcore_ctrl *)arg;
struct mbuf *m;
int off, v6;
/* Wait for first tickle */
SCTP_MCORE_LOCK(wkq);
wkq->running = 0;
msleep(&wkq->running,
&wkq->core_mtx,
0, "wait for pkt", 0);
SCTP_MCORE_UNLOCK(wkq);
/* Bind to our cpu */
thread_lock(curthread);
sched_bind(curthread, wkq->cpuid);
thread_unlock(curthread);
/* Now lets start working */
SCTP_MCORE_LOCK(wkq);
/* Now grab lock and go */
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
for (;;) {
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
SCTP_MCORE_QLOCK(wkq);
skip_sleep:
wkq->running = 1;
qent = TAILQ_FIRST(&wkq->que);
if (qent) {
TAILQ_REMOVE(&wkq->que, qent, next);
SCTP_MCORE_QUNLOCK(wkq);
CURVNET_SET(qent->vn);
m = qent->m;
off = qent->off;
v6 = qent->v6;
SCTP_FREE(qent, SCTP_M_MCORE);
if (v6 == 0) {
sctp_input_with_port(m, off, 0);
} else {
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
SCTP_PRINTF("V6 not yet supported\n");
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
sctp_m_freem(m);
}
CURVNET_RESTORE();
SCTP_MCORE_QLOCK(wkq);
}
wkq->running = 0;
if (!TAILQ_EMPTY(&wkq->que)) {
goto skip_sleep;
}
SCTP_MCORE_QUNLOCK(wkq);
msleep(&wkq->running,
&wkq->core_mtx,
0, "wait for pkt", 0);
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
}
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
}
static void
sctp_startup_mcore_threads(void)
{
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
int i, cpu;
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
if (mp_ncpus == 1)
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
return;
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
if (sctp_mcore_workers != NULL) {
/*
* Already been here in some previous vnet?
*/
return;
}
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
SCTP_MALLOC(sctp_mcore_workers, struct sctp_mcore_ctrl *,
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
((mp_maxid + 1) * sizeof(struct sctp_mcore_ctrl)),
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
SCTP_M_MCORE);
if (sctp_mcore_workers == NULL) {
/* TSNH I hope */
return;
}
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
memset(sctp_mcore_workers, 0, ((mp_maxid + 1) *
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
sizeof(struct sctp_mcore_ctrl)));
/* Init the structures */
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
for (i = 0; i <= mp_maxid; i++) {
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
TAILQ_INIT(&sctp_mcore_workers[i].que);
SCTP_MCORE_LOCK_INIT(&sctp_mcore_workers[i]);
SCTP_MCORE_QLOCK_INIT(&sctp_mcore_workers[i]);
sctp_mcore_workers[i].cpuid = i;
}
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
if (sctp_cpuarry == NULL) {
SCTP_MALLOC(sctp_cpuarry, int *,
(mp_ncpus * sizeof(int)),
SCTP_M_MCORE);
i = 0;
CPU_FOREACH(cpu) {
sctp_cpuarry[i] = cpu;
i++;
}
}
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
/* Now start them all */
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
CPU_FOREACH(cpu) {
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
(void)kproc_create(sctp_mcore_thread,
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
(void *)&sctp_mcore_workers[cpu],
&sctp_mcore_workers[cpu].thread_proc,
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
RFPROC,
SCTP_KTHREAD_PAGES,
SCTP_MCORE_NAME);
}
}
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void
sctp_pcb_init()
{
/*
* SCTP initialization for the PCB structures should be called by
* the sctp_init() funciton.
*/
int i;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
struct timeval tv;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_VAR(sctp_pcb_initialized) != 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* error I was called twice */
return;
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_VAR(sctp_pcb_initialized) = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- DF bit was on for COOKIE-ECHO chunks. This is incorrect and should be OFF letting IP fragment large cookie-echos. - Rename sysctl variable logging to log_level. - Fix description of sysctl variable stats. - Add sysctl variable log to make sctp_log readable via sysctl mechanism (this is by compile switch and targets non KTR platforms or when someone wants to do performance wise tracing). - Removed debug code Approved by: re@freebsd.org (B Mah)
2007-09-13 14:43:54 +00:00
#if defined(SCTP_LOCAL_TRACE_BUF)
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
bzero(&SCTP_BASE_SYSCTL(sctp_log), sizeof(struct sctp_log));
Fix the per CPU stats so that: 1) They don't use the giant "MAX_CPU" define and instead are allocated dynamically based on mp_ncpus 2) Will zero with the netstat -z -s -p sctp 3) Will be properly handled by both the sctp_init and finish (the multi-net stuff was incorrectly bzero'ing in sctp_init the wrong size.. the bzero is now moved to the right places). And of course the free is put in at the very end. MFC after: 3 Months
2011-02-03 11:52:22 +00:00
#endif
#if defined(__FreeBSD__) && defined(SMP) && defined(SCTP_USE_PERCPU_STAT)
SCTP_MALLOC(SCTP_BASE_STATS, struct sctpstat *,
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
((mp_maxid + 1) * sizeof(struct sctpstat)),
Fix the per CPU stats so that: 1) They don't use the giant "MAX_CPU" define and instead are allocated dynamically based on mp_ncpus 2) Will zero with the netstat -z -s -p sctp 3) Will be properly handled by both the sctp_init and finish (the multi-net stuff was incorrectly bzero'ing in sctp_init the wrong size.. the bzero is now moved to the right places). And of course the free is put in at the very end. MFC after: 3 Months
2011-02-03 11:52:22 +00:00
SCTP_M_MCORE);
- DF bit was on for COOKIE-ECHO chunks. This is incorrect and should be OFF letting IP fragment large cookie-echos. - Rename sysctl variable logging to log_level. - Fix description of sysctl variable stats. - Add sysctl variable log to make sctp_log readable via sysctl mechanism (this is by compile switch and targets non KTR platforms or when someone wants to do performance wise tracing). - Removed debug code Approved by: re@freebsd.org (B Mah)
2007-09-13 14:43:54 +00:00
#endif
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
(void)SCTP_GETTIME_TIMEVAL(&tv);
Adds the option of keeping per-cpu statistics in SCTP. This may be useful since it gets rid of atomics but I want it to remain an option until I can do further testing on if it really speeds things up.
2010-03-24 20:02:40 +00:00
#if defined(__FreeBSD__) && defined(SMP) && defined(SCTP_USE_PERCPU_STAT)
1) Fix cpu mapping per JB's suggestions 2) Fix it so INIT's don't always end up on CPU0 MFC after: 3 months
2011-02-04 13:50:30 +00:00
bzero(SCTP_BASE_STATS, (sizeof(struct sctpstat) * (mp_maxid + 1)));
Adds the option of keeping per-cpu statistics in SCTP. This may be useful since it gets rid of atomics but I want it to remain an option until I can do further testing on if it really speeds things up.
2010-03-24 20:02:40 +00:00
SCTP_BASE_STATS[PCPU_GET(cpuid)].sctps_discontinuitytime.tv_sec = (uint32_t) tv.tv_sec;
SCTP_BASE_STATS[PCPU_GET(cpuid)].sctps_discontinuitytime.tv_usec = (uint32_t) tv.tv_usec;
#else
Fix the per CPU stats so that: 1) They don't use the giant "MAX_CPU" define and instead are allocated dynamically based on mp_ncpus 2) Will zero with the netstat -z -s -p sctp 3) Will be properly handled by both the sctp_init and finish (the multi-net stuff was incorrectly bzero'ing in sctp_init the wrong size.. the bzero is now moved to the right places). And of course the free is put in at the very end. MFC after: 3 Months
2011-02-03 11:52:22 +00:00
bzero(&SCTP_BASE_STATS, sizeof(struct sctpstat));
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_STAT(sctps_discontinuitytime).tv_sec = (uint32_t) tv.tv_sec;
SCTP_BASE_STAT(sctps_discontinuitytime).tv_usec = (uint32_t) tv.tv_usec;
Adds the option of keeping per-cpu statistics in SCTP. This may be useful since it gets rid of atomics but I want it to remain an option until I can do further testing on if it really speeds things up.
2010-03-24 20:02:40 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* init the empty list of (All) Endpoints */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
LIST_INIT(&SCTP_BASE_INFO(listhead));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* init the hash table of endpoints */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
TUNABLE_INT_FETCH("net.inet.sctp.tcbhashsize", &SCTP_BASE_SYSCTL(sctp_hashtblsize));
TUNABLE_INT_FETCH("net.inet.sctp.pcbhashsize", &SCTP_BASE_SYSCTL(sctp_pcbtblsize));
TUNABLE_INT_FETCH("net.inet.sctp.chunkscale", &SCTP_BASE_SYSCTL(sctp_chunkscale));
SCTP_BASE_INFO(sctp_asochash) = SCTP_HASH_INIT((SCTP_BASE_SYSCTL(sctp_hashtblsize) * 31),
&SCTP_BASE_INFO(hashasocmark));
SCTP_BASE_INFO(sctp_ephash) = SCTP_HASH_INIT(SCTP_BASE_SYSCTL(sctp_hashtblsize),
&SCTP_BASE_INFO(hashmark));
SCTP_BASE_INFO(sctp_tcpephash) = SCTP_HASH_INIT(SCTP_BASE_SYSCTL(sctp_hashtblsize),
&SCTP_BASE_INFO(hashtcpmark));
SCTP_BASE_INFO(hashtblsize) = SCTP_BASE_SYSCTL(sctp_hashtblsize);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(sctp_vrfhash) = SCTP_HASH_INIT(SCTP_SIZE_OF_VRF_HASH,
&SCTP_BASE_INFO(hashvrfmark));
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(vrf_ifn_hash) = SCTP_HASH_INIT(SCTP_VRF_IFN_HASH_SIZE,
&SCTP_BASE_INFO(vrf_ifn_hashmark));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* init the zones */
/*
* FIX ME: Should check for NULL returns, but if it does fail we are
* doomed to panic anyways... add later maybe.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_ep), "sctp_ep",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_inpcb), maxsockets);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_asoc), "sctp_asoc",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_tcb), sctp_max_number_of_assoc);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_laddr), "sctp_laddr",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_laddr),
(sctp_max_number_of_assoc * sctp_scale_up_for_address));
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_net), "sctp_raddr",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_nets),
(sctp_max_number_of_assoc * sctp_scale_up_for_address));
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_chunk), "sctp_chunk",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_tmit_chunk),
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
(sctp_max_number_of_assoc * SCTP_BASE_SYSCTL(sctp_chunkscale)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_readq), "sctp_readq",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_queued_to_read),
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
(sctp_max_number_of_assoc * SCTP_BASE_SYSCTL(sctp_chunkscale)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_strmoq), "sctp_stream_msg_out",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sizeof(struct sctp_stream_queue_pending),
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
(sctp_max_number_of_assoc * SCTP_BASE_SYSCTL(sctp_chunkscale)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_asconf), "sctp_asconf",
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
sizeof(struct sctp_asconf),
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
(sctp_max_number_of_assoc * SCTP_BASE_SYSCTL(sctp_chunkscale)));
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_INIT(SCTP_BASE_INFO(ipi_zone_asconf_ack), "sctp_asconf_ack",
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
sizeof(struct sctp_asconf_ack),
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
(sctp_max_number_of_assoc * SCTP_BASE_SYSCTL(sctp_chunkscale)));
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Master Lock INIT for info structure */
SCTP_INP_INFO_LOCK_INIT();
SCTP_STATLOG_INIT_LOCK();
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_IPI_COUNT_INIT();
SCTP_IPI_ADDR_INIT();
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
#ifdef SCTP_PACKET_LOGGING
SCTP_IP_PKTLOG_INIT();
#endif
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
LIST_INIT(&SCTP_BASE_INFO(addr_wq));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_INIT();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* not sure if we need all the counts */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_ep) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* assoc/tcb zone info */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_asoc) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* local addrlist zone info */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_laddr) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* remote addrlist zone info */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_raddr) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* chunk info */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_chunk) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* socket queue zone info */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_readq) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* stream out queue cont */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_count_strmoq) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_BASE_INFO(ipi_free_strmoq) = 0;
SCTP_BASE_INFO(ipi_free_chunks) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_OS_TIMER_INIT(&SCTP_BASE_INFO(addr_wq_timer.timer));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Init the TIMEWAIT list */
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
for (i = 0; i < SCTP_STACK_VTAG_HASH_SIZE; i++) {
Correct usage of parenthesis. PR: kern/142066 Approved by: rrs (mentor) Obtained from: Henning Petersen, Bruce Cran. MFC after: 2 weeks
2010-01-04 18:25:38 +00:00
LIST_INIT(&SCTP_BASE_INFO(vtag_timewait)[i]);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_startup_iterator();
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
#if defined(__FreeBSD__) && defined(SCTP_MCORE_INPUT) && defined(SMP)
sctp_startup_mcore_threads();
#endif
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
* INIT the default VRF which for BSD is the only one, other O/S's
* may have more. But initially they must start with one and then
* add the VRF's as addresses are added.
*/
sctp_init_vrf_list(SCTP_DEFAULT_VRF);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
/*
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
* Assumes that the SCTP_BASE_INFO() lock is NOT held.
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
*/
void
sctp_pcb_finish(void)
{
struct sctp_vrflist *vrf_bucket;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_vrf *vrf, *nvrf;
struct sctp_ifn *ifn, *nifn;
struct sctp_ifa *ifa, *nifa;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
struct sctpvtaghead *chain;
struct sctp_tagblock *twait_block, *prev_twait_block;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_laddr *wi, *nwi;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
int i;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
/*
* Free BSD the it thread never exits but we do clean up. The only
* way freebsd reaches here if we have VRF's but we still add the
* ifdef to make it compile on old versions.
*/
{
struct sctp_iterator *it, *nit;
SCTP_IPI_ITERATOR_WQ_LOCK();
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(it, &sctp_it_ctl.iteratorhead, sctp_nxt_itr, nit) {
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
if (it->vn != curvnet) {
continue;
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_REMOVE(&sctp_it_ctl.iteratorhead, it, sctp_nxt_itr);
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
if (it->function_atend != NULL) {
(*it->function_atend) (it->pointer, it->val);
}
SCTP_FREE(it, SCTP_M_ITER);
}
SCTP_IPI_ITERATOR_WQ_UNLOCK();
SCTP_ITERATOR_LOCK();
if ((sctp_it_ctl.cur_it) &&
(sctp_it_ctl.cur_it->vn == curvnet)) {
sctp_it_ctl.iterator_flags |= SCTP_ITERATOR_STOP_CUR_IT;
}
SCTP_ITERATOR_UNLOCK();
}
Fix a memory leak when destroying an SCTP stack. Clean up sctp_pcb_finish(). Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 13:13:58 +00:00
SCTP_OS_TIMER_STOP(&SCTP_BASE_INFO(addr_wq_timer.timer));
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_LOCK();
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(wi, &SCTP_BASE_INFO(addr_wq), sctp_nxt_addr, nwi) {
Fix a memory leak when destroying an SCTP stack. Clean up sctp_pcb_finish(). Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 13:13:58 +00:00
LIST_REMOVE(wi, sctp_nxt_addr);
SCTP_DECR_LADDR_COUNT();
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_laddr), wi);
}
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_UNLOCK();
Fix a memory leak when destroying an SCTP stack. Clean up sctp_pcb_finish(). Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 13:13:58 +00:00
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
/*
* free the vrf/ifn/ifa lists and hashes (be sure address monitor is
* destroyed first).
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
vrf_bucket = &SCTP_BASE_INFO(sctp_vrfhash)[(SCTP_DEFAULT_VRFID & SCTP_BASE_INFO(hashvrfmark))];
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
LIST_FOREACH_SAFE(vrf, vrf_bucket, next_vrf, nvrf) {
LIST_FOREACH_SAFE(ifn, &vrf->ifnlist, next_ifn, nifn) {
LIST_FOREACH_SAFE(ifa, &ifn->ifalist, next_ifa, nifa) {
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
/* free the ifa */
LIST_REMOVE(ifa, next_bucket);
LIST_REMOVE(ifa, next_ifa);
SCTP_FREE(ifa, SCTP_M_IFA);
}
/* free the ifn */
LIST_REMOVE(ifn, next_bucket);
LIST_REMOVE(ifn, next_ifn);
SCTP_FREE(ifn, SCTP_M_IFN);
}
SCTP_HASH_FREE(vrf->vrf_addr_hash, vrf->vrf_addr_hashmark);
/* free the vrf */
LIST_REMOVE(vrf, next_vrf);
SCTP_FREE(vrf, SCTP_M_VRF);
}
/* free the vrf hashes */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_HASH_FREE(SCTP_BASE_INFO(sctp_vrfhash), SCTP_BASE_INFO(hashvrfmark));
SCTP_HASH_FREE(SCTP_BASE_INFO(vrf_ifn_hash), SCTP_BASE_INFO(vrf_ifn_hashmark));
/*
* free the TIMEWAIT list elements malloc'd in the function
* sctp_add_vtag_to_timewait()...
*/
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
for (i = 0; i < SCTP_STACK_VTAG_HASH_SIZE; i++) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
chain = &SCTP_BASE_INFO(vtag_timewait)[i];
Use always LIST_EMPTY instead of sometime SCTP_LIST_EMPTY, which is defined as LIST_EMPTY. Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 20:56:14 +00:00
if (!LIST_EMPTY(chain)) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
prev_twait_block = NULL;
LIST_FOREACH(twait_block, chain, sctp_nxt_tagblock) {
if (prev_twait_block) {
SCTP_FREE(prev_twait_block, SCTP_M_TIMW);
}
prev_twait_block = twait_block;
}
SCTP_FREE(prev_twait_block, SCTP_M_TIMW);
}
}
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
/* free the locks and mutexes */
#ifdef SCTP_PACKET_LOGGING
SCTP_IP_PKTLOG_DESTROY();
#endif
SCTP_IPI_ADDR_DESTROY();
SCTP_STATLOG_DESTROY();
SCTP_INP_INFO_LOCK_DESTROY();
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
SCTP_WQ_ADDR_DESTROY();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_ep));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_asoc));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_laddr));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_net));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_chunk));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_readq));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_strmoq));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_asconf));
SCTP_ZONE_DESTROY(SCTP_BASE_INFO(ipi_zone_asconf_ack));
More prep for Vimage: - only one functino to destroy an SCTP stack sctp_finish() - Make it so this function also arranges for any threads created by the image to do a kthread_exit()
2008-06-15 12:31:23 +00:00
/* Get rid of other stuff to */
if (SCTP_BASE_INFO(sctp_asochash) != NULL)
SCTP_HASH_FREE(SCTP_BASE_INFO(sctp_asochash), SCTP_BASE_INFO(hashasocmark));
if (SCTP_BASE_INFO(sctp_ephash) != NULL)
SCTP_HASH_FREE(SCTP_BASE_INFO(sctp_ephash), SCTP_BASE_INFO(hashmark));
if (SCTP_BASE_INFO(sctp_tcpephash) != NULL)
SCTP_HASH_FREE(SCTP_BASE_INFO(sctp_tcpephash), SCTP_BASE_INFO(hashtcpmark));
Fix the per CPU stats so that: 1) They don't use the giant "MAX_CPU" define and instead are allocated dynamically based on mp_ncpus 2) Will zero with the netstat -z -s -p sctp 3) Will be properly handled by both the sctp_init and finish (the multi-net stuff was incorrectly bzero'ing in sctp_init the wrong size.. the bzero is now moved to the right places). And of course the free is put in at the very end. MFC after: 3 Months
2011-02-03 11:52:22 +00:00
#if defined(__FreeBSD__) && defined(SMP) && defined(SCTP_USE_PERCPU_STAT)
SCTP_FREE(SCTP_BASE_STATS, SCTP_M_MCORE);
#endif
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int
sctp_load_addresses_from_init(struct sctp_tcb *stcb, struct mbuf *m,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
int offset, int limit,
struct sockaddr *src, struct sockaddr *dst,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sockaddr *altsa)
{
/*
* grub through the INIT pulling addresses and loading them to the
* nets structure in the asoc. The from address in the mbuf should
* also be loaded (if it is not already). This routine can be called
* with either INIT or INIT-ACK's as long as the m points to the IP
* packet and the offset points to the beginning of the parameters.
*/
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
struct sctp_inpcb *inp;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_nets *net, *nnet, *net_tmp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_paramhdr *phdr, parm_buf;
struct sctp_tcb *stcb_tmp;
uint16_t ptype, plen;
struct sockaddr *sa;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint8_t random_store[SCTP_PARAM_BUFFER_SIZE];
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
struct sctp_auth_random *p_random = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint16_t random_len = 0;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint8_t hmacs_store[SCTP_PARAM_BUFFER_SIZE];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_auth_hmac_algo *hmacs = NULL;
uint16_t hmacs_len = 0;
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
uint8_t saw_asconf = 0;
uint8_t saw_asconf_ack = 0;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint8_t chunks_store[SCTP_PARAM_BUFFER_SIZE];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_auth_chunk_list *chunks = NULL;
uint16_t num_chunks = 0;
sctp_key_t *new_key;
uint32_t keylen;
int got_random = 0, got_hmacs = 0, got_chklist = 0;
Make sure that changing the ECN sysctl does not affect exisiting associations and endpoints. MFC after: 3 months.
2011-02-03 19:59:00 +00:00
uint8_t ecn_allowed;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
struct sockaddr_in sin;
#endif
#ifdef INET6
struct sockaddr_in6 sin6;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* First get the destination address setup too. */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
memset(&sin, 0, sizeof(sin));
sin.sin_family = AF_INET;
sin.sin_len = sizeof(sin);
sin.sin_port = stcb->rport;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
#ifdef INET6
memset(&sin6, 0, sizeof(sin6));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sin6.sin6_family = AF_INET6;
sin6.sin6_len = sizeof(struct sockaddr_in6);
sin6.sin6_port = stcb->rport;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#endif
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
if (altsa) {
sa = altsa;
} else {
sa = src;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Turn off ECN until we get through all params */
Make sure that changing the ECN sysctl does not affect exisiting associations and endpoints. MFC after: 3 months.
2011-02-03 19:59:00 +00:00
ecn_allowed = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
/* mark all addresses that we have currently on the list */
net->dest_state |= SCTP_ADDR_NOT_IN_ASSOC;
}
/* does the source address already exist? if so skip it */
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
inp = stcb->sctp_ep;
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, 1);
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
stcb_tmp = sctp_findassociation_ep_addr(&inp, sa, &net_tmp, dst, stcb);
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, -1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((stcb_tmp == NULL && inp == stcb->sctp_ep) || inp == NULL) {
/* we must add the source address */
/* no scope set here since we have a tcb already. */
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (sa->sa_family) {
#ifdef INET
case AF_INET:
if (stcb->asoc.ipv4_addr_legal) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (sctp_add_remote_addr(stcb, sa, NULL, SCTP_DONOT_SETSCOPE, SCTP_LOAD_ADDR_2)) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
return (-1);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET6
case AF_INET6:
if (stcb->asoc.ipv6_addr_legal) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (sctp_add_remote_addr(stcb, sa, NULL, SCTP_DONOT_SETSCOPE, SCTP_LOAD_ADDR_3)) {
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
return (-2);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
if (net_tmp != NULL && stcb_tmp == stcb) {
net_tmp->dest_state &= ~SCTP_ADDR_NOT_IN_ASSOC;
} else if (stcb_tmp != stcb) {
/* It belongs to another association? */
- Fixes cstatic issues found by cisco sa tool (missing frees and such on error legs) - align sctp_sockstore to 64 bit boundary ..
2007-06-18 21:59:15 +00:00
if (stcb_tmp)
SCTP_TCB_UNLOCK(stcb_tmp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (-3);
}
}
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-4);
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
/*
* peer must explicitly turn this on. This may have been initialized
* to be "on" in order to allow local addr changes while INIT's are
* in flight.
*/
stcb->asoc.peer_supports_asconf = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* now we must go through each of the params. */
phdr = sctp_get_next_param(m, offset, &parm_buf, sizeof(parm_buf));
while (phdr) {
ptype = ntohs(phdr->param_type);
plen = ntohs(phdr->param_length);
/*
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
* SCTP_PRINTF("ptype => %0x, plen => %d\n",
* (uint32_t)ptype, (int)plen);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
if (offset + plen > limit) {
break;
}
if (plen == 0) {
break;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ptype == SCTP_IPV4_ADDRESS) {
if (stcb->asoc.ipv4_addr_legal) {
struct sctp_ipv4addr_param *p4, p4_buf;
/* ok get the v4 address and check/add */
phdr = sctp_get_next_param(m, offset,
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
(struct sctp_paramhdr *)&p4_buf,
sizeof(p4_buf));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (plen != sizeof(struct sctp_ipv4addr_param) ||
phdr == NULL) {
return (-5);
}
p4 = (struct sctp_ipv4addr_param *)phdr;
sin.sin_addr.s_addr = p4->addr;
Fix a bug which results in peer IPv4 addresses a.b.c.d with 224<=d<=239 incorrectly being detected as multicast addresses on little endian systems. MFC after: 2 weeks
2010-09-01 16:11:26 +00:00
if (IN_MULTICAST(ntohl(sin.sin_addr.s_addr))) {
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
/* Skip multi-cast addresses */
goto next_param;
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if ((sin.sin_addr.s_addr == INADDR_BROADCAST) ||
(sin.sin_addr.s_addr == INADDR_ANY)) {
goto next_param;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sa = (struct sockaddr *)&sin;
inp = stcb->sctp_ep;
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb_tmp = sctp_findassociation_ep_addr(&inp, sa, &net,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
dst, stcb);
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, -1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((stcb_tmp == NULL && inp == stcb->sctp_ep) ||
inp == NULL) {
/* we must add the source address */
/*
* no scope set since we have a tcb
* already
*/
/*
* we must validate the state again
* here
*/
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
add_it_now:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-7);
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (sctp_add_remote_addr(stcb, sa, NULL, SCTP_DONOT_SETSCOPE, SCTP_LOAD_ADDR_4)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (-8);
}
} else if (stcb_tmp == stcb) {
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-10);
}
if (net != NULL) {
/* clear flag */
net->dest_state &=
~SCTP_ADDR_NOT_IN_ASSOC;
}
} else {
/*
* strange, address is in another
* assoc? straighten out locks.
*/
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if (stcb_tmp) {
if (SCTP_GET_STATE(&stcb_tmp->asoc) & SCTP_STATE_COOKIE_WAIT) {
/*
* in setup state we
* abort this guy
*/
sctp_abort_an_association(stcb_tmp->sctp_ep,
Provide in the association change notification the received ABORT chunk if case of SCTP_COMM_LOST or SCTP_CANT_STR_ASSOC as required by RFC 6458. MFC after: 3 days
2012-05-12 20:11:35 +00:00
stcb_tmp, NULL, SCTP_SO_NOT_LOCKED);
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
goto add_it_now;
}
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
SCTP_TCB_UNLOCK(stcb_tmp);
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-12);
}
return (-13);
}
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
} else
#endif
#ifdef INET6
if (ptype == SCTP_IPV6_ADDRESS) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.ipv6_addr_legal) {
/* ok get the v6 address and check/add */
struct sctp_ipv6addr_param *p6, p6_buf;
phdr = sctp_get_next_param(m, offset,
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
(struct sctp_paramhdr *)&p6_buf,
sizeof(p6_buf));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (plen != sizeof(struct sctp_ipv6addr_param) ||
phdr == NULL) {
return (-14);
}
p6 = (struct sctp_ipv6addr_param *)phdr;
memcpy((caddr_t)&sin6.sin6_addr, p6->addr,
sizeof(p6->addr));
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (IN6_IS_ADDR_MULTICAST(&sin6.sin6_addr)) {
/* Skip multi-cast addresses */
goto next_param;
}
if (IN6_IS_ADDR_LINKLOCAL(&sin6.sin6_addr)) {
/*
* Link local make no sense without
* scope
*/
goto next_param;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sa = (struct sockaddr *)&sin6;
inp = stcb->sctp_ep;
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb_tmp = sctp_findassociation_ep_addr(&inp, sa, &net,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
dst, stcb);
Tons of fixes to get all the 64bit issues removed. This also moves two 16 bit int's to become 32 bit values so we do not have to use atomic_add_16. Most of the changes are %p, casts and other various nasty's that were in the orignal code base. With this commit my machine will now do a build universe.. however I as yet have not tested on a 64bit machine .. it may not work :-(
2006-11-05 13:25:18 +00:00
atomic_add_int(&stcb->asoc.refcnt, -1);
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
if (stcb_tmp == NULL &&
(inp == stcb->sctp_ep || inp == NULL)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* we must validate the state again
* here
*/
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
add_it_now6:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-16);
}
/*
* we must add the address, no scope
* set
*/
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (sctp_add_remote_addr(stcb, sa, NULL, SCTP_DONOT_SETSCOPE, SCTP_LOAD_ADDR_5)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (-17);
}
} else if (stcb_tmp == stcb) {
/*
* we must validate the state again
* here
*/
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-19);
}
if (net != NULL) {
/* clear flag */
net->dest_state &=
~SCTP_ADDR_NOT_IN_ASSOC;
}
} else {
/*
* strange, address is in another
* assoc? straighten out locks.
*/
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
if (stcb_tmp)
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
if (SCTP_GET_STATE(&stcb_tmp->asoc) & SCTP_STATE_COOKIE_WAIT) {
/*
* in setup state we
* abort this guy
*/
sctp_abort_an_association(stcb_tmp->sctp_ep,
Provide in the association change notification the received ABORT chunk if case of SCTP_COMM_LOST or SCTP_CANT_STR_ASSOC as required by RFC 6458. MFC after: 3 days
2012-05-12 20:11:35 +00:00
stcb_tmp, NULL, SCTP_SO_NOT_LOCKED);
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
goto add_it_now6;
}
SCTP_TCB_UNLOCK(stcb_tmp);
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->asoc.state == 0) {
/* the assoc was freed? */
return (-21);
}
return (-22);
}
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
} else
#endif
if (ptype == SCTP_ECN_CAPABLE) {
Make sure that changing the ECN sysctl does not affect exisiting associations and endpoints. MFC after: 3 months.
2011-02-03 19:59:00 +00:00
ecn_allowed = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else if (ptype == SCTP_ULP_ADAPTATION) {
if (stcb->asoc.state != SCTP_STATE_OPEN) {
struct sctp_adaptation_layer_indication ai,
*aip;
phdr = sctp_get_next_param(m, offset,
(struct sctp_paramhdr *)&ai, sizeof(ai));
aip = (struct sctp_adaptation_layer_indication *)phdr;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
if (aip) {
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
stcb->asoc.peers_adaptation = ntohl(aip->indication);
stcb->asoc.adaptation_needed = 1;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else if (ptype == SCTP_SET_PRIM_ADDR) {
struct sctp_asconf_addr_param lstore, *fee;
int lptype;
struct sockaddr *lsa = NULL;
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
#ifdef INET
struct sctp_asconf_addrv4_param *fii;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.peer_supports_asconf = 1;
if (plen > sizeof(lstore)) {
return (-23);
}
phdr = sctp_get_next_param(m, offset,
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
(struct sctp_paramhdr *)&lstore,
min(plen, sizeof(lstore)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL) {
return (-24);
}
fee = (struct sctp_asconf_addr_param *)phdr;
lptype = ntohs(fee->addrp.ph.param_type);
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
switch (lptype) {
#ifdef INET
case SCTP_IPV4_ADDRESS:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (plen !=
sizeof(struct sctp_asconf_addrv4_param)) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTP_PRINTF("Sizeof setprim in init/init ack not %d but %d - ignored\n",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
(int)sizeof(struct sctp_asconf_addrv4_param),
plen);
} else {
fii = (struct sctp_asconf_addrv4_param *)fee;
sin.sin_addr.s_addr = fii->addrp.addr;
lsa = (struct sockaddr *)&sin;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
#ifdef INET6
case SCTP_IPV6_ADDRESS:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (plen !=
sizeof(struct sctp_asconf_addr_param)) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTP_PRINTF("Sizeof setprim (v6) in init/init ack not %d but %d - ignored\n",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
(int)sizeof(struct sctp_asconf_addr_param),
plen);
} else {
memcpy(sin6.sin6_addr.s6_addr,
fee->addrp.addr,
sizeof(fee->addrp.addr));
lsa = (struct sockaddr *)&sin6;
}
Improve compilation of SCTP code without INET support. Some bugs where fixed while doing this: * ASCONF-ACK messages might use wrong port number when using IPv6. * Checking for additional addresses takes the correct address into account and also does not do more comparisons than necessary. This patch is based on one received from bz@ who was sponsored by The FreeBSD Foundation and iXsystems. MFC after: 1 week
2011-04-30 11:18:16 +00:00
break;
#endif
default:
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (lsa) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
(void)sctp_set_primary_addr(stcb, sa, NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
} else if (ptype == SCTP_HAS_NAT_SUPPORT) {
stcb->asoc.peer_supports_nat = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else if (ptype == SCTP_PRSCTP_SUPPORTED) {
/* Peer supports pr-sctp */
stcb->asoc.peer_supports_prsctp = 1;
} else if (ptype == SCTP_SUPPORTED_CHUNK_EXT) {
/* A supported extension chunk */
struct sctp_supported_chunk_types_param *pr_supported;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint8_t local_store[SCTP_PARAM_BUFFER_SIZE];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int num_ent, i;
phdr = sctp_get_next_param(m, offset,
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
(struct sctp_paramhdr *)&local_store, min(sizeof(local_store), plen));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL) {
return (-25);
}
stcb->asoc.peer_supports_asconf = 0;
stcb->asoc.peer_supports_prsctp = 0;
stcb->asoc.peer_supports_pktdrop = 0;
stcb->asoc.peer_supports_strreset = 0;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
stcb->asoc.peer_supports_nr_sack = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.peer_supports_auth = 0;
pr_supported = (struct sctp_supported_chunk_types_param *)phdr;
num_ent = plen - sizeof(struct sctp_paramhdr);
for (i = 0; i < num_ent; i++) {
switch (pr_supported->chunk_types[i]) {
case SCTP_ASCONF:
case SCTP_ASCONF_ACK:
stcb->asoc.peer_supports_asconf = 1;
break;
case SCTP_FORWARD_CUM_TSN:
stcb->asoc.peer_supports_prsctp = 1;
break;
case SCTP_PACKET_DROPPED:
stcb->asoc.peer_supports_pktdrop = 1;
break;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
case SCTP_NR_SELECTIVE_ACK:
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
stcb->asoc.peer_supports_nr_sack = 1;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
case SCTP_STREAM_RESET:
stcb->asoc.peer_supports_strreset = 1;
break;
case SCTP_AUTHENTICATION:
stcb->asoc.peer_supports_auth = 1;
break;
default:
/* one I have not learned yet */
break;
}
}
} else if (ptype == SCTP_RANDOM) {
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (plen > sizeof(random_store))
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
if (got_random) {
/* already processed a RANDOM */
goto next_param;
}
phdr = sctp_get_next_param(m, offset,
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
(struct sctp_paramhdr *)random_store,
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
min(sizeof(random_store), plen));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL)
return (-26);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
p_random = (struct sctp_auth_random *)phdr;
random_len = plen - sizeof(*p_random);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* enforce the random length */
if (random_len != SCTP_AUTH_RANDOM_SIZE_REQUIRED) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_AUTH1, "SCTP: invalid RANDOM len\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (-27);
}
got_random = 1;
} else if (ptype == SCTP_HMAC_LIST) {
int num_hmacs;
int i;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (plen > sizeof(hmacs_store))
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
if (got_hmacs) {
/* already processed a HMAC list */
goto next_param;
}
phdr = sctp_get_next_param(m, offset,
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
(struct sctp_paramhdr *)hmacs_store,
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
min(plen, sizeof(hmacs_store)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL)
return (-28);
hmacs = (struct sctp_auth_hmac_algo *)phdr;
hmacs_len = plen - sizeof(*hmacs);
num_hmacs = hmacs_len / sizeof(hmacs->hmac_ids[0]);
/* validate the hmac list */
if (sctp_verify_hmac_param(hmacs, num_hmacs)) {
return (-29);
}
if (stcb->asoc.peer_hmacs != NULL)
sctp_free_hmaclist(stcb->asoc.peer_hmacs);
stcb->asoc.peer_hmacs = sctp_alloc_hmaclist(num_hmacs);
if (stcb->asoc.peer_hmacs != NULL) {
for (i = 0; i < num_hmacs; i++) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)sctp_auth_add_hmacid(stcb->asoc.peer_hmacs,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
ntohs(hmacs->hmac_ids[i]));
}
}
got_hmacs = 1;
} else if (ptype == SCTP_CHUNK_LIST) {
int i;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (plen > sizeof(chunks_store))
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
if (got_chklist) {
/* already processed a Chunks list */
goto next_param;
}
phdr = sctp_get_next_param(m, offset,
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
(struct sctp_paramhdr *)chunks_store,
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
min(plen, sizeof(chunks_store)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (phdr == NULL)
return (-30);
chunks = (struct sctp_auth_chunk_list *)phdr;
num_chunks = plen - sizeof(*chunks);
if (stcb->asoc.peer_auth_chunks != NULL)
sctp_clear_chunklist(stcb->asoc.peer_auth_chunks);
else
stcb->asoc.peer_auth_chunks = sctp_alloc_chunklist();
for (i = 0; i < num_chunks; i++) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)sctp_auth_add_chunk(chunks->chunk_types[i],
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.peer_auth_chunks);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* record asconf/asconf-ack if listed */
if (chunks->chunk_types[i] == SCTP_ASCONF)
saw_asconf = 1;
if (chunks->chunk_types[i] == SCTP_ASCONF_ACK)
saw_asconf_ack = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
got_chklist = 1;
} else if ((ptype == SCTP_HEARTBEAT_INFO) ||
(ptype == SCTP_STATE_COOKIE) ||
(ptype == SCTP_UNRECOG_PARAM) ||
(ptype == SCTP_COOKIE_PRESERVE) ||
(ptype == SCTP_SUPPORTED_ADDRTYPE) ||
(ptype == SCTP_ADD_IP_ADDRESS) ||
(ptype == SCTP_DEL_IP_ADDRESS) ||
(ptype == SCTP_ERROR_CAUSE_IND) ||
(ptype == SCTP_SUCCESS_REPORT)) {
/* don't care */ ;
} else {
if ((ptype & 0x8000) == 0x0000) {
/*
* must stop processing the rest of the
* param's. Any report bits were handled
* with the call to
* sctp_arethere_unrecognized_parameters()
* when the INIT or INIT-ACK was first seen.
*/
break;
}
}
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
next_param:
offset += SCTP_SIZE32(plen);
if (offset >= limit) {
break;
}
phdr = sctp_get_next_param(m, offset, &parm_buf,
sizeof(parm_buf));
}
/* Now check to see if we need to purge any addresses */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(net, &stcb->asoc.nets, sctp_next, nnet) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((net->dest_state & SCTP_ADDR_NOT_IN_ASSOC) ==
SCTP_ADDR_NOT_IN_ASSOC) {
/* This address has been removed from the asoc */
/* remove and free it */
stcb->asoc.numnets--;
TAILQ_REMOVE(&stcb->asoc.nets, net, sctp_next);
sctp_free_remote_addr(net);
if (net == stcb->asoc.primary_destination) {
stcb->asoc.primary_destination = NULL;
sctp_select_primary_destination(stcb);
}
}
}
Make sure that changing the ECN sysctl does not affect exisiting associations and endpoints. MFC after: 3 months.
2011-02-03 19:59:00 +00:00
if (ecn_allowed == 0) {
stcb->asoc.ecn_allowed = 0;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* validate authentication required parameters */
if (got_random && got_hmacs) {
stcb->asoc.peer_supports_auth = 1;
} else {
stcb->asoc.peer_supports_auth = 0;
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (!stcb->asoc.peer_supports_auth && got_chklist) {
/* peer does not support auth but sent a chunks list? */
return (-31);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (!SCTP_BASE_SYSCTL(sctp_asconf_auth_nochk) && stcb->asoc.peer_supports_asconf &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
!stcb->asoc.peer_supports_auth) {
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/* peer supports asconf but not auth? */
return (-32);
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
} else if ((stcb->asoc.peer_supports_asconf) && (stcb->asoc.peer_supports_auth) &&
((saw_asconf == 0) || (saw_asconf_ack == 0))) {
return (-33);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* concatenate the full random key */
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
keylen = sizeof(*p_random) + random_len + sizeof(*hmacs) + hmacs_len;
if (chunks != NULL) {
keylen += sizeof(*chunks) + num_chunks;
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
new_key = sctp_alloc_key(keylen);
if (new_key != NULL) {
/* copy in the RANDOM */
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (p_random != NULL) {
keylen = sizeof(*p_random) + random_len;
bcopy(p_random, new_key->key, keylen);
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* append in the AUTH chunks */
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (chunks != NULL) {
bcopy(chunks, new_key->key + keylen,
sizeof(*chunks) + num_chunks);
keylen += sizeof(*chunks) + num_chunks;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* append in the HMACs */
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (hmacs != NULL) {
bcopy(hmacs, new_key->key + keylen,
sizeof(*hmacs) + hmacs_len);
}
Get rid of support of an old version of the SCTP-AUTH draft. Get rid of unused MD5 code. MFC after: 1 week
2010-01-16 20:04:17 +00:00
} else {
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/* failed to get memory for the key */
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
return (-34);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (stcb->asoc.authinfo.peer_random != NULL)
sctp_free_key(stcb->asoc.authinfo.peer_random);
stcb->asoc.authinfo.peer_random = new_key;
sctp_clear_cachedkeys(stcb, stcb->asoc.authinfo.assoc_keyid);
sctp_clear_cachedkeys(stcb, stcb->asoc.authinfo.recv_keyid);
return (0);
}
int
sctp_set_primary_addr(struct sctp_tcb *stcb, struct sockaddr *sa,
struct sctp_nets *net)
{
/* make sure the requested primary address exists in the assoc */
if (net == NULL && sa)
net = sctp_findnet(stcb, sa);
if (net == NULL) {
/* didn't find the requested primary address! */
return (-1);
} else {
/* set the primary address */
if (net->dest_state & SCTP_ADDR_UNCONFIRMED) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* Must be confirmed, so queue to set */
net->dest_state |= SCTP_ADDR_REQ_PRIMARY;
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
stcb->asoc.primary_destination = net;
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (!(net->dest_state & SCTP_ADDR_PF) && (stcb->asoc.alternate)) {
sctp_free_remote_addr(stcb->asoc.alternate);
stcb->asoc.alternate = NULL;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net = TAILQ_FIRST(&stcb->asoc.nets);
if (net != stcb->asoc.primary_destination) {
/*
* first one on the list is NOT the primary
Fix typos. PR: bin/148894 Submitted by: olgeni
2010-11-09 10:59:09 +00:00
* sctp_cmpaddr() is much more efficient if the
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* primary is the first on the list, make it so.
*/
TAILQ_REMOVE(&stcb->asoc.nets, stcb->asoc.primary_destination, sctp_next);
TAILQ_INSERT_HEAD(&stcb->asoc.nets, stcb->asoc.primary_destination, sctp_next);
}
return (0);
}
}
int
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_is_vtag_good(uint32_t tag, uint16_t lport, uint16_t rport, struct timeval *now)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* This function serves two purposes. It will see if a TAG can be
* re-used and return 1 for yes it is ok and 0 for don't use that
* tag. A secondary function it will do is purge out old tags that
* can be removed.
*/
struct sctpvtaghead *chain;
struct sctp_tagblock *twait_block;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctpasochead *head;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tcb *stcb;
int i;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
SCTP_INP_INFO_RLOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
head = &SCTP_BASE_INFO(sctp_asochash)[SCTP_PCBHASH_ASOC(tag,
SCTP_BASE_INFO(hashasocmark))];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (head == NULL) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* invalid vtag */
goto skip_vtag_check;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
LIST_FOREACH(stcb, head, sctp_asocs) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/*
* We choose not to lock anything here. TCB's can't be
* removed since we have the read lock, so they can't be
* freed on us, same thing for the INP. I may be wrong with
* this assumption, but we will go with it for now :-)
*/
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) {
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (stcb->asoc.my_vtag == tag) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* candidate */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (stcb->rport != rport) {
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
if (stcb->sctp_ep->sctp_lport != lport) {
continue;
}
/* Its a used tag set */
Fix a bug that WILL cause a panic. Basically a read-lock is being called to check the vtag-timewait cache. Then in two cases (where a vtag is bad i.e. in the time-wait state) the write-unlock is called NOT the read-unlock. Under conditions where lots of associations are coming and going this will cause the system to panic at some point. MFC after: 3 days
2010-07-02 09:53:26 +00:00
SCTP_INP_INFO_RUNLOCK();
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
skip_vtag_check:
Correct usage of parenthesis. PR: kern/142066 Approved by: rrs (mentor) Obtained from: Henning Petersen, Bruce Cran. MFC after: 2 weeks
2010-01-04 18:25:38 +00:00
chain = &SCTP_BASE_INFO(vtag_timewait)[(tag % SCTP_STACK_VTAG_HASH_SIZE)];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now what about timed wait ? */
Use always LIST_EMPTY instead of sometime SCTP_LIST_EMPTY, which is defined as LIST_EMPTY. Approved by: rrs (mentor) MFC after: 1 month
2009-11-17 20:56:14 +00:00
if (!LIST_EMPTY(chain)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Block(s) are present, lets see if we have this tag in the
* list
*/
LIST_FOREACH(twait_block, chain, sctp_nxt_tagblock) {
for (i = 0; i < SCTP_NUMBER_IN_VTAG_BLOCK; i++) {
if (twait_block->vtag_block[i].v_tag == 0) {
/* not used */
continue;
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
} else if ((long)twait_block->vtag_block[i].tv_sec_at_expire <
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
now->tv_sec) {
/* Audit expires this guy */
twait_block->vtag_block[i].tv_sec_at_expire = 0;
twait_block->vtag_block[i].v_tag = 0;
- Cleanup checksum code. - Prepare for CRC offloading, add MIB counters (RS/MT). - Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT). - Bugfix: Handle close() with SO_LINGER correctly when notifications are generated during the close() call(MT). - Bugfix: Generate DRY event when sender is dry during subscription. Only for 1-to-1 style sockets (RS/MT) - Bugfix: Put vtags for the correct amount of time into time-wait (MT). - Bugfix: Clear vtag entries correctly on expiration (MT). - Bugfix: shutdown() indicates ENOTCONN when called for unconnected 1-to-1 style sockets (MT). - Bugfix: In sctp Auth code (PL). - Add support for devices that support SCTP csum offload (igb). - Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS) Obtained from: With help from Peter Lei and Michael Tuexen
2009-02-03 11:04:03 +00:00
twait_block->vtag_block[i].lport = 0;
twait_block->vtag_block[i].rport = 0;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
} else if ((twait_block->vtag_block[i].v_tag == tag) &&
(twait_block->vtag_block[i].lport == lport) &&
(twait_block->vtag_block[i].rport == rport)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Bad tag, sorry :< */
Fix a bug that WILL cause a panic. Basically a read-lock is being called to check the vtag-timewait cache. Then in two cases (where a vtag is bad i.e. in the time-wait state) the write-unlock is called NOT the read-unlock. Under conditions where lots of associations are coming and going this will cause the system to panic at some point. MFC after: 3 days
2010-07-02 09:53:26 +00:00
SCTP_INP_INFO_RUNLOCK();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (0);
}
}
}
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
SCTP_INP_INFO_RUNLOCK();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (1);
}
static void
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_drain_mbufs(struct sctp_tcb *stcb)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* We must hunt this association for MBUF's past the cumack (i.e.
* out of order data that we can renege on).
*/
struct sctp_association *asoc;
struct sctp_tmit_chunk *chk, *nchk;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
uint32_t cumulative_tsn_p1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_queued_to_read *ctl, *nctl;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
int cnt, strmat;
uint32_t gap, i;
int fnd = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* We look for anything larger than the cum-ack + 1 */
asoc = &stcb->asoc;
if (asoc->cumulative_tsn == asoc->highest_tsn_inside_map) {
/* none we can reneg on. */
return;
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
SCTP_STAT_INCR(sctps_protocol_drains_done);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
cumulative_tsn_p1 = asoc->cumulative_tsn + 1;
cnt = 0;
/* First look in the re-assembly queue */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(chk, &asoc->reasmqueue, sctp_next, nchk) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(chk->rec.data.TSN_seq, cumulative_tsn_p1)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Yep it is above cum-ack */
cnt++;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
SCTP_CALC_TSN_TO_GAP(gap, chk->rec.data.TSN_seq, asoc->mapping_array_base_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->size_on_reasm_queue = sctp_sbspace_sub(asoc->size_on_reasm_queue, chk->send_size);
sctp_ucount_decr(asoc->cnt_on_reasm_queue);
SCTP_UNSET_TSN_PRESENT(asoc->mapping_array, gap);
TAILQ_REMOVE(&asoc->reasmqueue, chk, sctp_next);
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
}
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
/* Ok that was fun, now we will drain all the inbound streams? */
for (strmat = 0; strmat < asoc->streamincnt; strmat++) {
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(ctl, &asoc->strmin[strmat].inqueue, next, nctl) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(ctl->sinfo_tsn, cumulative_tsn_p1)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Yep it is above cum-ack */
cnt++;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
SCTP_CALC_TSN_TO_GAP(gap, ctl->sinfo_tsn, asoc->mapping_array_base_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->size_on_all_streams = sctp_sbspace_sub(asoc->size_on_all_streams, ctl->length);
sctp_ucount_decr(asoc->cnt_on_all_streams);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
SCTP_UNSET_TSN_PRESENT(asoc->mapping_array, gap);
TAILQ_REMOVE(&asoc->strmin[strmat].inqueue, ctl, next);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ctl->data) {
sctp_m_freem(ctl->data);
ctl->data = NULL;
}
sctp_free_remote_addr(ctl->whoFrom);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
SCTP_ZONE_FREE(SCTP_BASE_INFO(ipi_zone_readq), ctl);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_DECR_READQ_COUNT();
}
}
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (cnt) {
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
/* We must back down to see what the new highest is */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
for (i = asoc->highest_tsn_inside_map; SCTP_TSN_GE(i, asoc->mapping_array_base_tsn); i--) {
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
SCTP_CALC_TSN_TO_GAP(gap, i, asoc->mapping_array_base_tsn);
if (SCTP_IS_TSN_PRESENT(asoc->mapping_array, gap)) {
asoc->highest_tsn_inside_map = i;
fnd = 1;
break;
}
}
if (!fnd) {
asoc->highest_tsn_inside_map = asoc->mapping_array_base_tsn - 1;
}
/*
* Question, should we go through the delivery queue? The
* only reason things are on here is the app not reading OR
* a p-d-api up. An attacker COULD send enough in to
* initiate the PD-API and then send a bunch of stuff to
* other streams... these would wind up on the delivery
* queue.. and then we would not get to them. But in order
* to do this I then have to back-track and un-deliver
* sequence numbers in streams.. el-yucko. I think for now
* we will NOT look at the delivery queue and leave it to be
* something to consider later. An alternative would be to
* abort the P-D-API with a notification and then deliver
* the data.... Or another method might be to keep track of
* how many times the situation occurs and if we see a
* possible attack underway just abort the association.
*/
#ifdef SCTP_DEBUG
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_PCB1, "Freed %d chunks from reneg harvest\n", cnt);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Now do we need to find a new
* asoc->highest_tsn_inside_map?
*/
asoc->last_revoke_count = cnt;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_OS_TIMER_STOP(&stcb->asoc.dack_timer.timer);
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_send_sack(stcb, SCTP_SO_NOT_LOCKED);
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
sctp_chunk_output(stcb->sctp_ep, stcb, SCTP_OUTPUT_FROM_DRAIN, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* Another issue, in un-setting the TSN's in the mapping array we
Improve the scalability by using the local and remote port when putting inps in the tcpephash. MFC after: 3 days.
2010-11-09 16:18:32 +00:00
* DID NOT adjust the highest_tsn marker. This will cause one of
* two things to occur. It may cause us to do extra work in checking
* for our mapping array movement. More importantly it may cause us
* to SACK every datagram. This may not be a bad thing though since
* we will recover once we get our cum-ack above and all this stuff
* we dumped recovered.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
}
void
sctp_drain()
{
/*
* We must walk the PCB lists for ALL associations here. The system
* is LOW on MBUF's and needs help. This is where reneging will
* occur. We really hope this does NOT happen!
*/
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
VNET_ITERATOR_DECL(vnet_iter);
VNET_LIST_RLOCK_NOSLEEP();
VNET_FOREACH(vnet_iter) {
CURVNET_SET(vnet_iter);
struct sctp_inpcb *inp;
struct sctp_tcb *stcb;
Fix handling of sctp_drain(). Approved by: rrs (mentor) MFC after: 2 month
2009-09-20 11:33:39 +00:00
SCTP_STAT_INCR(sctps_protocol_drain_calls);
if (SCTP_BASE_SYSCTL(sctp_do_drain) == 0) {
#ifdef VIMAGE
continue;
#else
return;
#endif
}
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
SCTP_INP_INFO_RLOCK();
LIST_FOREACH(inp, &SCTP_BASE_INFO(listhead), sctp_list) {
/* For each endpoint */
SCTP_INP_RLOCK(inp);
LIST_FOREACH(stcb, &inp->sctp_asoc_list, sctp_tcblist) {
/* For each association */
SCTP_TCB_LOCK(stcb);
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_drain_mbufs(stcb);
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
SCTP_TCB_UNLOCK(stcb);
}
SCTP_INP_RUNLOCK(inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
SCTP_INP_INFO_RUNLOCK();
CURVNET_RESTORE();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
VNET_LIST_RUNLOCK_NOSLEEP();
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* start a new iterator
* iterates through all endpoints and associations based on the pcb_state
* flags and asoc_state. "af" (mandatory) is executed for all matching
* assocs and "ef" (optional) is executed when the iterator completes.
* "inpf" (optional) is executed for each new endpoint as it is being
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
* iterated through. inpe (optional) is called when the inp completes
* its way through all the stcbs.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
int
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_initiate_iterator(inp_func inpf,
asoc_func af,
inp_func inpe,
uint32_t pcb_state,
uint32_t pcb_features,
uint32_t asoc_state,
void *argp,
uint32_t argi,
end_func ef,
struct sctp_inpcb *s_inp,
uint8_t chunk_output_off)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_iterator *it = NULL;
if (af == NULL) {
return (-1);
}
SCTP_MALLOC(it, struct sctp_iterator *, sizeof(struct sctp_iterator),
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_M_ITER);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (it == NULL) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(NULL, NULL, NULL, SCTP_FROM_SCTP_PCB, ENOMEM);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (ENOMEM);
}
memset(it, 0, sizeof(*it));
it->function_assoc = af;
it->function_inp = inpf;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (inpf)
it->done_current_ep = 0;
else
it->done_current_ep = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
it->function_atend = ef;
it->pointer = argp;
it->val = argi;
it->pcb_flags = pcb_state;
it->pcb_features = pcb_features;
it->asoc_state = asoc_state;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
it->function_inp_end = inpe;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
it->no_chunk_output = chunk_output_off;
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
it->vn = curvnet;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (s_inp) {
3 Fixes - a) There was a case where a ICMP message could cause us to return leaving a stuck lock on an stcb. b) The iterator needed some tweaks to fix its lock ordering. c) The ITERATOR_LOCK is no longer needed in the freeing of a stcb. Now that the timer based one is gone we don't have a multiple resume situation. Add to that that there was somewhere a path out of the freeing of an assoc that did NOT release the iterator_lock.. it was time to clean this old code up and in the process fix the lock bug. MFC after: 1 week
2010-06-11 03:54:00 +00:00
/* Assume lock is held here */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
it->inp = s_inp;
3 Fixes - a) There was a case where a ICMP message could cause us to return leaving a stuck lock on an stcb. b) The iterator needed some tweaks to fix its lock ordering. c) The ITERATOR_LOCK is no longer needed in the freeing of a stcb. Now that the timer based one is gone we don't have a multiple resume situation. Add to that that there was somewhere a path out of the freeing of an assoc that did NOT release the iterator_lock.. it was time to clean this old code up and in the process fix the lock bug. MFC after: 1 week
2010-06-11 03:54:00 +00:00
SCTP_INP_INCR_REF(it->inp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
it->iterator_flags = SCTP_ITERATOR_DO_SINGLE_INP;
} else {
SCTP_INP_INFO_RLOCK();
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
it->inp = LIST_FIRST(&SCTP_BASE_INFO(listhead));
3 Fixes - a) There was a case where a ICMP message could cause us to return leaving a stuck lock on an stcb. b) The iterator needed some tweaks to fix its lock ordering. c) The ITERATOR_LOCK is no longer needed in the freeing of a stcb. Now that the timer based one is gone we don't have a multiple resume situation. Add to that that there was somewhere a path out of the freeing of an assoc that did NOT release the iterator_lock.. it was time to clean this old code up and in the process fix the lock bug. MFC after: 1 week
2010-06-11 03:54:00 +00:00
if (it->inp) {
SCTP_INP_INCR_REF(it->inp);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_INP_INFO_RUNLOCK();
it->iterator_flags = SCTP_ITERATOR_DO_ALL_INP;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
SCTP_IPI_ITERATOR_WQ_LOCK();
3 Fixes - a) There was a case where a ICMP message could cause us to return leaving a stuck lock on an stcb. b) The iterator needed some tweaks to fix its lock ordering. c) The ITERATOR_LOCK is no longer needed in the freeing of a stcb. Now that the timer based one is gone we don't have a multiple resume situation. Add to that that there was somewhere a path out of the freeing of an assoc that did NOT release the iterator_lock.. it was time to clean this old code up and in the process fix the lock bug. MFC after: 1 week
2010-06-11 03:54:00 +00:00
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
TAILQ_INSERT_TAIL(&sctp_it_ctl.iteratorhead, it, sctp_nxt_itr);
if (sctp_it_ctl.iterator_running == 0) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_wakeup_iterator();
}
SCTP_IPI_ITERATOR_WQ_UNLOCK();
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore MEMLEAK {memory is put on the tailq for the iterator} */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (0);
}
Reference in New Issue Copy Permalink