freebsd-dev/usr.sbin/pccard/pccardd/pccard.conf.5

.\"
.\" Copyright (c) 1994 Andrew McRae.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd November 2, 1994
.Dt PCCARD.CONF 5
.Os FreeBSD
.Sh NAME
.Nm pccard.conf
.Nd
.Xr pccardd 8
configuration file
.Sh DESCRIPTION
The
.Nm
file is the configuration file for the
.Xr pccardd 8
PC-CARD slot management daemon.
It provides information to allow card
identification, and the matching of drivers (along
with driver resources) to the PC-CARD cards.
.Pp
There are four basic elements within the configuration file;
An optional
.Em "resource pool"
preceding the other sections,
and one or more
.Em "card identifiers" ,
and
.Em "device instances" .
The latter two may appear in any order, and may be
interspersed as desired.
.Pp
Each PC-CARD card contains configuration tuples that provide
the manufacturer and card version; these are used
to identify the card specification in the configuration
file, and from this find a driver that can be used to
interface to the particular card. There is a many-to-one mapping
between cards to drivers i.e a single driver may interface to
multiple types of cards. To aid this, card parameters may be
specified separately from the driver to initialize the card or
extract (in the case of a network card) an Ethernet address.
.Pp
Once a driver is allocated to a card, it stays
allocated to that particular card.
However, multiple instances of the same type of driver can be
configured, so that if two cards are plugged in that map to a
similar type of driver, other driver instances of the same name
can be configured.
.Pp
The
.Em insert
and
.Em remove
commands allow a shell command line to be executed.
The command to be executed is the rest of the line after
the keyword. The line can be continued using a backslash.
A simple
macro substitution allows the current kernel device name
.Em ( $device )
and
network card Ethernet address
.Em ( $ether )
to be inserted into the command line.
.Xr pccardd 8
uses the
.Xr system 3
subroutine to execute the command line.
.Pp
Numeric values may be expressed as octal, hex or decimal.
If a decimal number has
.Em k
or
.Em K
appended to it, the value is multiplied by 1024. Names may be
quoted using double quotes if spaces are required.
A hash character comments out the rest of the line.
.Ss "Resource pool"
The (optional) section specifies a pool of system resources
such as ISA bus memory address space, Input/Output ports and
interrupt request numbers. This resource pool is used
to allocate address space and interrupt numbers dynamically
according to the requirements specified in each driver
description.
.Pp
The syntax of the resources is as follows:
.Pp
.Dl io Ar start - end ...
.Dl memory Ar address size ...
.Dl irq Ar irq-number ...
.Pp
Each of the statements define I/O, memory or IRQ
blocks that can be used to allocate to drivers when
they are initialized.
.Pp
Multiple lines of any of the above statements may be
present to allow separate blocks of each resource to be
defined.
.Ss "Card Identifiers"
The syntax for card identifiers is:
.Pp
.Dl card Ar manufacturer version
.Dl config Ar index driver interrupt [ flags ]
.Dl ether Ar offset
.Dl insert Ar command
.Dl remove Ar command
.Pp
The first line is mandatory;
the latter statements are optional and can appear in
any order. There may be multiple
.Em config
lines.
The
.Em card
parameters are the Manufacturer name and card version that
is used to match the values from the card's CIS memory. The
.Em config
parameters select the particular card's configuration index
from the range available in the card's CIS, the driver that
is to be associated with this configuration, and the interrupt
level (if any) to be assigned. An optional set of flags may
be assigned.
.Pp
The optional
.Em ether
keyword is used when network cards have their physical Ethernet address
located within the attribute memory of the card. The parameter of this
statement indicates the offset within the attribute memory of the
Ethernet address. This value can be used within insert/remove
commands using the
.Em $ether
macro.
.Pp
The
.Em insert
and
.Em remove
sections allow shell commands to be specified that are executed
when the card is inserted or removed. Multiple
.Em insert
and
.Em remove
commands are allowed, and they are executed in the order they
are listed.
.Sh EXAMPLE
A typical configuration file may appear thus:
.Bd -literal
#
# Sample configuration file.
#
# Pool parameters.
#
io 0x280 - 0x2F0 0x300 - 0x360
irq 5 6 8 9 10 15
memory 0xd4000 96k
memory 0xc4000 32k
#
# Card database.
#
card "RPTI LTD." "EP400"  # NE2000 clone
       ether 0x110
       config 0x21 "ed0" 5
       insert ifconfig $device physical $ether
       insert ifconfig $device bean
       remove ifconfig $device down

card "XYZZY" "FAX/1.0"
       config 0x30 "sio1" 11
       insert echo start getty
       remove echo stop getty

.Ed
.Sh FILES
.Bl -tag -width /etc/pccard.conf -compact
.It Pa /etc/pccard.conf
The
.Xr pccardd 8
configuration file.
.El
.Sh SEE ALSO
.Xr pccardd 8