d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
092bd4489f
freebsd-dev/sys/pci/pci_compat.c

274 lines
6.2 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include "opt_bus.h"
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* for compatibility to FreeBSD-2.2 version of PCI code */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <sys/interrupt.h>
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <pci/pcireg.h>
#include <pci/pcivar.h>
Fix a warning (#include the apic_next_irq() prototype for APIC_IO)
1998-11-09 08:03:01 +00:00
#ifdef APIC_IO
#include <machine/smp.h>
#endif
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
#ifdef __i386__
#include <i386/isa/intr_machdep.h>
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#ifdef PCI_COMPAT
/* ------------------------------------------------------------------------- */
u_long
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_conf_read(pcici_t cfg, u_long reg)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
return (pci_read_config(cfg->dev, reg, 4));
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
void
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_conf_write(pcici_t cfg, u_long reg, u_long data)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_write_config(cfg->dev, reg, data, 4);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
Minor style nit (this minor style.9 violation caused a grep miss here)
1999-05-07 16:33:08 +00:00
int
pci_map_port(pcici_t cfg, u_long reg, pci_port_t* pa)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
int rid;
struct resource *res;
rid = reg;
res = bus_alloc_resource(cfg->dev, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (res) {
*pa = rman_get_start(res);
return (1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
return (0);
}
Minor style nit (this minor style.9 violation caused a grep miss here)
1999-05-07 16:33:08 +00:00
int
pci_map_mem(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
int rid;
struct resource *res;
rid = reg;
res = bus_alloc_resource(cfg->dev, SYS_RES_MEMORY, &rid,
0, ~0, 1, RF_ACTIVE);
if (res) {
*pa = rman_get_start(res);
*va = (vm_offset_t) rman_get_virtual(res);
return (1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
return (0);
}
Add functions for accessing dense and bwx memory for pci devices. These routines are necessary to allow the use of certain types of hardware on the alpha, particularly a Myrinet card. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
int
pci_map_dense(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual() address of the resource is initialised to point into either dense-mapped or bwx-mapped space respectively, allowing direct memory pointers to be used to device memory. Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00
int rid;
struct resource *res;
rid = reg;
res = bus_alloc_resource(cfg->dev, SYS_RES_DENSE, &rid,
0, ~0, 1, RF_ACTIVE);
if (res) {
*pa = rman_get_start(res);
*va = (vm_offset_t) rman_get_virtual(res);
return (1);
Add functions for accessing dense and bwx memory for pci devices. These routines are necessary to allow the use of certain types of hardware on the alpha, particularly a Myrinet card. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
}
return (0);
}
int
pci_map_bwx(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual() address of the resource is initialised to point into either dense-mapped or bwx-mapped space respectively, allowing direct memory pointers to be used to device memory. Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00
int rid;
struct resource *res;
rid = reg;
res = bus_alloc_resource(cfg->dev, SYS_RES_BWX, &rid,
0, ~0, 1, RF_ACTIVE);
if (res) {
*pa = rman_get_start(res);
*va = (vm_offset_t) rman_get_virtual(res);
return (1);
Add functions for accessing dense and bwx memory for pci devices. These routines are necessary to allow the use of certain types of hardware on the alpha, particularly a Myrinet card. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
}
return (0);
}
Let drivers specify interrupt flags (INTR_EXCL and/or INTR_FAST) using the new pci_map_int_right() variant of pci_map_int(). Fast interrupts work for PCI devices if and only if they are exclusive. (The PCI interrupt mux doesn't support fast interrupts and can't support a mixture of fast and slow interrupts even in principle.) Don't assume that intrmask_t == unsigned in pci_map_int().
1999-01-13 04:59:19 +00:00
int
pci_map_int(pcici_t cfg, pci_inthand_t *handler, void *arg, intrmask_t *maskptr)
{
return (pci_map_int_right(cfg, handler, arg, maskptr, 0));
}
Add functions for accessing dense and bwx memory for pci devices. These routines are necessary to allow the use of certain types of hardware on the alpha, particularly a Myrinet card. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int
Let drivers specify interrupt flags (INTR_EXCL and/or INTR_FAST) using the new pci_map_int_right() variant of pci_map_int(). Fast interrupts work for PCI devices if and only if they are exclusive. (The PCI interrupt mux doesn't support fast interrupts and can't support a mixture of fast and slow interrupts even in principle.) Don't assume that intrmask_t == unsigned in pci_map_int().
1999-01-13 04:59:19 +00:00
pci_map_int_right(pcici_t cfg, pci_inthand_t *handler, void *arg,
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
intrmask_t *maskptr, u_int intflags)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
int error;
#ifdef APIC_IO
int nextpin, muxcnt;
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (cfg->intpin != 0) {
int irq = cfg->intline;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
int rid = 0;
struct resource *res;
Move the declaration of the interrupt type from the driver structure to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
int flags = 0;
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
int resflags = RF_SHAREABLE|RF_ACTIVE;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
void *ih;
Move the declaration of the interrupt type from the driver structure to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
#ifdef INTR_FAST
if (intflags & INTR_FAST)
flags |= INTR_FAST;
if (intflags & INTR_EXCL)
resflags &= ~RF_SHAREABLE;
#endif
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
res = bus_alloc_resource(cfg->dev, SYS_RES_IRQ, &rid,
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
irq, irq, 1, resflags);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
if (!res) {
printf("pci_map_int: can't allocate interrupt\n");
return 0;
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
/*
Move the declaration of the interrupt type from the driver structure to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
* This is ugly. Translate the mask into an interrupt type.
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
*/
if (maskptr == &tty_imask)
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
flags |= INTR_TYPE_TTY;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
else if (maskptr == &bio_imask)
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
flags |= INTR_TYPE_BIO;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
else if (maskptr == &net_imask)
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
flags |= INTR_TYPE_NET;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
else if (maskptr == &cam_imask)
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
flags |= INTR_TYPE_CAM;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
error = BUS_SETUP_INTR(device_get_parent(cfg->dev), cfg->dev,
Move the declaration of the interrupt type from the driver structure to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
res, flags, handler, arg, &ih);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
if (error != 0)
return 0;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#ifdef NEW_BUS_PCI
/*
* XXX this apic stuff looks totally busted. It should
* move to the nexus code which actually registers the
* interrupt.
*/
#endif
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
#ifdef APIC_IO
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
nextpin = next_apic_irq(irq);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
if (nextpin < 0)
return 1;
/*
* Attempt handling of some broken mp tables.
*
* It's OK to yell (since the mp tables are broken).
*
* Hanging in the boot is not OK
*/
muxcnt = 2;
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
nextpin = next_apic_irq(nextpin);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
while (muxcnt < 5 && nextpin >= 0) {
muxcnt++;
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
nextpin = next_apic_irq(nextpin);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
}
if (muxcnt >= 5) {
printf("bogus MP table, more than 4 IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n");
return 0;
}
printf("bogus MP table, %d IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n", muxcnt);
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
nextpin = next_apic_irq(irq);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
while (nextpin >= 0) {
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
rid = 0;
res = bus_alloc_resource(cfg->dev, SYS_RES_IRQ, &rid,
nextpin, nextpin, 1,
Take a shot at handling INTR_FAST and INTR_EXCL for CY_PCI_FASTINTR. Bruce suggested a patch before but that was based on the old DRIVER_TYPE_* interfaces.
1999-05-11 15:28:38 +00:00
resflags);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
if (!res) {
printf("pci_map_int: can't allocate extra interrupt\n");
return 0;
}
error = BUS_SETUP_INTR(device_get_parent(cfg->dev),
Move the declaration of the interrupt type from the driver structure to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
cfg->dev, res, flags,
handler, arg, &ih);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
if (error != 0) {
printf("pci_map_int: BUS_SETUP_INTR failed\n");
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
return 0;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
printf("Registered extra interrupt handler for int %d (in addition to int %d)\n", nextpin, irq);
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
nextpin = next_apic_irq(nextpin);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
}
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
return (1);
}
int
pci_unmap_int(pcici_t cfg)
{
return (0); /* not supported, yet, since cfg doesn't know about idesc */
}
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
pcici_t
pci_get_parent_from_tag(pcici_t tag)
{
return (pcici_t)pci_devlist_get_parent(tag);
}
int
pci_get_bus_from_tag(pcici_t tag)
{
return tag->bus;
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#endif /* PCI_COMPAT */
Reference in New Issue Copy Permalink