d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0a276edef9
freebsd-dev/sys/dev/sound/pcm/vchan.h

53 lines
2.0 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
update my email address.
2003-09-07 16:28:03 +00:00
* Copyright (c) 2001 Cameron Grant <cg@freebsd.org>
beginnings of virtual playback channel support instead of using two malloced arrays for storing channel lists, use an slist. convert the sndstat device to use sbufs and optionally provide more detail about channel state. vchans are software mixed playback channels. they are not enabled by this commit. they use the feeder infrastructure to emulate normal playback channels in a manner transparent to applications, whilst providing as many channels are desired, especially suitable for devices with only one hardware playback channel. in the future they will provide additional features. those wishing to test this functionality will need to add vchan.c to sys/conf/files and use 'sysctl -w hw.snd.pcm0.vchans' to enable it. blocksize and auto-rate selection are not yet supported.
2001-05-27 17:22:00 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
int vchan_create(struct pcm_channel *parent, int num);
beginnings of virtual playback channel support instead of using two malloced arrays for storing channel lists, use an slist. convert the sndstat device to use sbufs and optionally provide more detail about channel state. vchans are software mixed playback channels. they are not enabled by this commit. they use the feeder infrastructure to emulate normal playback channels in a manner transparent to applications, whilst providing as many channels are desired, especially suitable for devices with only one hardware playback channel. in the future they will provide additional features. those wishing to test this functionality will need to add vchan.c to sys/conf/files and use 'sysctl -w hw.snd.pcm0.vchans' to enable it. blocksize and auto-rate selection are not yet supported.
2001-05-27 17:22:00 +00:00
int vchan_destroy(struct pcm_channel *c);
many changes: * add new channels to the end of the list so channels used in order of addition * de-globalise definition of struct snddev_info and provide accessor functions where necessary. * move the $FreeBSD$ tag in each .c file into a macro and allow the /dev/sndstat handler to display these when set to maximum verbosity to aid debugging. * allow each device to register its own sndstat handler to reduce the amount of groping sndstat must do in foreign structs.
2001-08-23 11:30:52 +00:00
int vchan_initsys(device_t dev);
beginnings of virtual playback channel support instead of using two malloced arrays for storing channel lists, use an slist. convert the sndstat device to use sbufs and optionally provide more detail about channel state. vchans are software mixed playback channels. they are not enabled by this commit. they use the feeder infrastructure to emulate normal playback channels in a manner transparent to applications, whilst providing as many channels are desired, especially suitable for devices with only one hardware playback channel. in the future they will provide additional features. those wishing to test this functionality will need to add vchan.c to sys/conf/files and use 'sysctl -w hw.snd.pcm0.vchans' to enable it. blocksize and auto-rate selection are not yet supported.
2001-05-27 17:22:00 +00:00
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
/*
* Default speed / format
*/
#define VCHAN_DEFAULT_SPEED 48000
#define VCHAN_DEFAULT_AFMT (AFMT_S16_LE | AFMT_STEREO)
#define VCHAN_DEFAULT_STRFMT "s16le"
#define VCHAN_PLAY 0
#define VCHAN_REC 1
/*
* Offset by +/- 1 so we can distinguish bogus pointer.
*/
#define VCHAN_SYSCTL_DATA(x, y) \
((void *)((intptr_t)(((((x) + 1) & 0xfff) << 2) | \
(((VCHAN_##y) + 1) & 0x3))))
beginnings of virtual playback channel support instead of using two malloced arrays for storing channel lists, use an slist. convert the sndstat device to use sbufs and optionally provide more detail about channel state. vchans are software mixed playback channels. they are not enabled by this commit. they use the feeder infrastructure to emulate normal playback channels in a manner transparent to applications, whilst providing as many channels are desired, especially suitable for devices with only one hardware playback channel. in the future they will provide additional features. those wishing to test this functionality will need to add vchan.c to sys/conf/files and use 'sysctl -w hw.snd.pcm0.vchans' to enable it. blocksize and auto-rate selection are not yet supported.
2001-05-27 17:22:00 +00:00
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
#define VCHAN_SYSCTL_DATA_SIZE sizeof(void *)
#define VCHAN_SYSCTL_UNIT(x) ((int)(((intptr_t)(x) >> 2) & 0xfff) - 1)
#define VCHAN_SYSCTL_DIR(x) ((int)((intptr_t)(x) & 0x3) - 1)
Reference in New Issue Copy Permalink