freebsd-dev/usr.sbin/mrouted/mrouted.conf

# $Id$
#
#   This is the configuration file for "mrouted", an IP multicast router.
#   mrouted looks for it in "/etc/mrouted.conf".
#
#   Command formats:
#
# name <boundname> <scoped-addr>/<mask-len>
# cache_lifetime 3600		# seconds
# pruning on
#
# phyint <local-addr> [disable] [metric <m>] [threshold <t>] [rate_limit <b>]
#                         [boundary (<boundname>|<scoped-addr>/<mask-len>)]
#			  [altnet (<subnet>/<mask-len>|<subnet>)]
# tunnel <local-addr> <remote-addr> [srcrt] [metric <m>] 
#                                      [threshold <t>] [rate_limit <b>]
#                         [boundary (<boundname>|<scoped-addr>/<mask-len>)]
#
#   NOTE: any phyint commands MUST precede any tunnel commands
#   NOTE: the mask-len is the no. of leading 1's in the mask
#   NOTE: rate_limit is in kilobits, and defaults to 500 for tunnels
#
# Example of named bounary:
#name LOCAL 239.255.0.0/16
#name EE 239.254.0.0/16		# i.e. the EE dept wants local groups
#
# Example of use of named boundary
#phyint le1 boundary EE		# le1 is our interface to comp sci,
#				# keep them away from our local groups
#
#
# Template tunnel for mcast_install
tunnel 128.4.0.77 128.4.0.8 metric 1 threshold 64 rate_limit 500  # <-- REPLACE
#	boundary LOCAL
#
# You might want to specify a boundary on your tunnel to the outside world,
# as above.
#
# NOTE: ONLY uncomment the following if you are running mrouted.snmp!
#sysName	"mymrouter"
#sysContact	"Me <me@me.com> +x.yyy.zzz-zzzz"
#sysVersion	"MyOS 4.1.3 and mrouted"
#sysLocation	"The MBONE"
Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00			`# $Id$`
mrouted from multicast 3.3 distribution 1994-09-08 00:26:13 +00:00			`#`
			`# This is the configuration file for "mrouted", an IP multicast router.`
			`# mrouted looks for it in "/etc/mrouted.conf".`
			`#`
			`# Command formats:`
			`#`
This is mrouted version 3.5, with the route-change notification hook from mrouted-3.5n. This is being splatted onto the head rather than properly imported thanks to the ``delete trailing whitespace'' screw. This code is now actively working in an operational environment (the DARTNET) so I have some confidence that the basic functionality actually works. Obtained from: Bill Fenner, PARC, and ISI 1995-06-13 18:05:16 +00:00			`# name <boundname> <scoped-addr>/<mask-len>`
			`# cache_lifetime 3600 # seconds`
mrouted from multicast 3.3 distribution 1994-09-08 00:26:13 +00:00			`# pruning on`
			`#`
			`# phyint <local-addr> [disable] [metric <m>] [threshold <t>] [rate_limit <b>]`
This is mrouted version 3.5, with the route-change notification hook from mrouted-3.5n. This is being splatted onto the head rather than properly imported thanks to the ``delete trailing whitespace'' screw. This code is now actively working in an operational environment (the DARTNET) so I have some confidence that the basic functionality actually works. Obtained from: Bill Fenner, PARC, and ISI 1995-06-13 18:05:16 +00:00			`# [boundary (<boundname>\|<scoped-addr>/<mask-len>)]`
			`# [altnet (<subnet>/<mask-len>\|<subnet>)]`
mrouted from multicast 3.3 distribution 1994-09-08 00:26:13 +00:00			`# tunnel <local-addr> <remote-addr> [srcrt] [metric <m>]`
			`# [threshold <t>] [rate_limit <b>]`
This is mrouted version 3.5, with the route-change notification hook from mrouted-3.5n. This is being splatted onto the head rather than properly imported thanks to the ``delete trailing whitespace'' screw. This code is now actively working in an operational environment (the DARTNET) so I have some confidence that the basic functionality actually works. Obtained from: Bill Fenner, PARC, and ISI 1995-06-13 18:05:16 +00:00			`# [boundary (<boundname>\|<scoped-addr>/<mask-len>)]`
mrouted from multicast 3.3 distribution 1994-09-08 00:26:13 +00:00			`#`
			`# NOTE: any phyint commands MUST precede any tunnel commands`
			`# NOTE: the mask-len is the no. of leading 1's in the mask`
This is mrouted version 3.5, with the route-change notification hook from mrouted-3.5n. This is being splatted onto the head rather than properly imported thanks to the ``delete trailing whitespace'' screw. This code is now actively working in an operational environment (the DARTNET) so I have some confidence that the basic functionality actually works. Obtained from: Bill Fenner, PARC, and ISI 1995-06-13 18:05:16 +00:00			`# NOTE: rate_limit is in kilobits, and defaults to 500 for tunnels`
mrouted from multicast 3.3 distribution 1994-09-08 00:26:13 +00:00			`#`
This is mrouted version 3.5, with the route-change notification hook from mrouted-3.5n. This is being splatted onto the head rather than properly imported thanks to the ``delete trailing whitespace'' screw. This code is now actively working in an operational environment (the DARTNET) so I have some confidence that the basic functionality actually works. Obtained from: Bill Fenner, PARC, and ISI 1995-06-13 18:05:16 +00:00			`# Example of named bounary:`
			`#name LOCAL 239.255.0.0/16`
			`#name EE 239.254.0.0/16 # i.e. the EE dept wants local groups`
			`#`
			`# Example of use of named boundary`
			`#phyint le1 boundary EE # le1 is our interface to comp sci,`
			`# # keep them away from our local groups`
			`#`
			`#`
			`# Template tunnel for mcast_install`
			`tunnel 128.4.0.77 128.4.0.8 metric 1 threshold 64 rate_limit 500 # <-- REPLACE`
			`# boundary LOCAL`
			`#`
			`# You might want to specify a boundary on your tunnel to the outside world,`
			`# as above.`
Resync our mainline to mrouted release 3.8. This will make FreeBSD boxes better behaved 'MBONE Citizens', based on a couple of the comments about the severity of fixes.. Agreed to by: wollman, fenner@parc.xerox.com 1996-01-06 21:10:30 +00:00			`#`
			`# NOTE: ONLY uncomment the following if you are running mrouted.snmp!`
			`#sysName "mymrouter"`
			`#sysContact "Me <me@me.com> +x.yyy.zzz-zzzz"`
			`#sysVersion "MyOS 4.1.3 and mrouted"`
			`#sysLocation "The MBONE"`