d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0c093a7055
freebsd-dev/sys/arm/ti/omap4/omap4_prcm_clks.c

1419 lines
42 KiB
C
Raw Normal View History

Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
/*-
* Copyright (c) 2011
* Ben Gray <ben.r.gray@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/cpufunc.h>
#include <machine/frame.h>
#include <machine/resource.h>
#include <machine/intr.h>
#include <arm/ti/tivar.h>
#include <arm/ti/ti_prcm.h>
#include <arm/ti/omap4/omap4_reg.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
/*
* This file defines the clock configuration for the OMAP4xxx series of
* devices.
*
* How This is Suppose to Work
* ===========================
* - There is a top level omap_prcm module that defines all OMAP SoC drivers
* should use to enable/disable the system clocks regardless of the version
* of OMAP device they are running on. This top level PRCM module is just
* a thin shim to chip specific functions that perform the donkey work of
* configuring the clock - this file is the 'donkey' for OMAP44xx devices.
*
* - The key bit in this file is the omap_clk_devmap array, it's
* used by the omap_prcm driver to determine what clocks are valid and which
* functions to call to manipulate them.
*
* - In essence you just need to define some callbacks for each of the
* clocks and then you're done.
*
* - The other thing that is worth noting is that when the omap_prcm device
* is registered you typically pass in some memory ranges which are the
* SYS_MEMORY resources. These resources are in turn allocated using
* bus_allocate_resources(...) and the resource handles are passed to all
* individual clock callback handlers.
*
*
*
* OMAP4 devices are different from the previous OMAP3 devices in that there
* is no longer a separate functional and interface clock for each module,
* instead there is typically an interface clock that spans many modules.
*
*/
#define FREQ_96MHZ 96000000
#define FREQ_64MHZ 64000000
#define FREQ_48MHZ 48000000
#define FREQ_32KHZ 32000
/**
* We need three memory regions to cover all the clock configuration registers.
*
* PRM Instance - 0x4A30 6000 : 0x4A30 8000
* CM1 Instance - 0x4A00 4000 : 0x4A00 5000
* CM2 Instance - 0x4A00 8000 : 0x4A00 A000
*
*/
#define PRM_INSTANCE_MEM_REGION 0
#define CM1_INSTANCE_MEM_REGION 1
#define CM2_INSTANCE_MEM_REGION 2
/**
* Address offsets from the PRM memory region to the top level clock control
* registers.
*/
#define CKGEN_PRM_OFFSET 0x00000100UL
#define MPU_PRM_OFFSET 0x00000300UL
#define DSP_PRM_OFFSET 0x00000400UL
#define ABE_PRM_OFFSET 0x00000500UL
#define ALWAYS_ON_PRM_OFFSET 0x00000600UL
#define CORE_PRM_OFFSET 0x00000700UL
#define IVAHD_PRM_OFFSET 0x00000F00UL
#define CAM_PRM_OFFSET 0x00001000UL
#define DSS_PRM_OFFSET 0x00001100UL
#define SGX_PRM_OFFSET 0x00001200UL
#define L3INIT_PRM_OFFSET 0x00001300UL
#define L4PER_PRM_OFFSET 0x00001400UL
#define WKUP_PRM_OFFSET 0x00001700UL
#define WKUP_CM_OFFSET 0x00001800UL
#define EMU_PRM_OFFSET 0x00001900UL
#define EMU_CM_OFFSET 0x00001A00UL
#define DEVICE_PRM_OFFSET 0x00001B00UL
#define INSTR_PRM_OFFSET 0x00001F00UL
#define CM_ABE_DSS_SYS_CLKSEL_OFFSET (CKGEN_PRM_OFFSET + 0x0000UL)
#define CM_L4_WKUP_CLKSELL_OFFSET (CKGEN_PRM_OFFSET + 0x0008UL)
#define CM_ABE_PLL_REF_CLKSEL_OFFSET (CKGEN_PRM_OFFSET + 0x000CUL)
#define CM_SYS_CLKSEL_OFFSET (CKGEN_PRM_OFFSET + 0x0010UL)
/**
* Address offsets from the CM1 memory region to the top level clock control
* registers.
*/
#define CKGEN_CM1_OFFSET 0x00000100UL
#define MPU_CM1_OFFSET 0x00000300UL
#define DSP_CM1_OFFSET 0x00000400UL
#define ABE_CM1_OFFSET 0x00000500UL
#define RESTORE_CM1_OFFSET 0x00000E00UL
#define INSTR_CM1_OFFSET 0x00000F00UL
#define CM_CLKSEL_DPLL_MPU (CKGEN_CM1_OFFSET + 0x006CUL)
/**
* Address offsets from the CM2 memory region to the top level clock control
* registers.
*/
#define INTRCONN_SOCKET_CM2_OFFSET 0x00000000UL
#define CKGEN_CM2_OFFSET 0x00000100UL
#define ALWAYS_ON_CM2_OFFSET 0x00000600UL
#define CORE_CM2_OFFSET 0x00000700UL
#define IVAHD_CM2_OFFSET 0x00000F00UL
#define CAM_CM2_OFFSET 0x00001000UL
#define DSS_CM2_OFFSET 0x00001100UL
#define SGX_CM2_OFFSET 0x00001200UL
#define L3INIT_CM2_OFFSET 0x00001300UL
#define L4PER_CM2_OFFSET 0x00001400UL
#define RESTORE_CM2_OFFSET 0x00001E00UL
#define INSTR_CM2_OFFSET 0x00001F00UL
#define CLKCTRL_MODULEMODE_MASK 0x00000003UL
#define CLKCTRL_MODULEMODE_DISABLE 0x00000000UL
#define CLKCTRL_MODULEMODE_AUTO 0x00000001UL
#define CLKCTRL_MODULEMODE_ENABLE 0x00000001UL
#define CLKCTRL_IDLEST_MASK 0x00030000UL
#define CLKCTRL_IDLEST_ENABLED 0x00000000UL
#define CLKCTRL_IDLEST_WAKING 0x00010000UL
#define CLKCTRL_IDLEST_IDLE 0x00020000UL
#define CLKCTRL_IDLEST_DISABLED 0x00030000UL
static struct resource_spec omap4_scm_res_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE }, /* Control memory window */
{ SYS_RES_MEMORY, 1, RF_ACTIVE }, /* Control memory window */
{ SYS_RES_MEMORY, 2, RF_ACTIVE }, /* Control memory window */
{ -1, 0 }
};
struct omap4_prcm_softc {
struct resource *sc_res[3];
};
static struct omap4_prcm_softc *omap4_prcm_sc;
static int omap4_clk_generic_activate(struct ti_clock_dev *clkdev);
static int omap4_clk_generic_deactivate(struct ti_clock_dev *clkdev);
static int omap4_clk_generic_accessible(struct ti_clock_dev *clkdev);
static int omap4_clk_generic_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
static int omap4_clk_generic_get_source_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
static int omap4_clk_gptimer_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
static int omap4_clk_gptimer_get_source_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
static int omap4_clk_hsmmc_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
static int omap4_clk_hsmmc_get_source_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
static int omap4_clk_hsusbhost_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
static int omap4_clk_hsusbhost_activate(struct ti_clock_dev *clkdev);
static int omap4_clk_hsusbhost_deactivate(struct ti_clock_dev *clkdev);
static int omap4_clk_hsusbhost_accessible(struct ti_clock_dev *clkdev);
static int omap4_clk_get_sysclk_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
static int omap4_clk_get_arm_fclk_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
/**
* omap_clk_devmap - Array of clock devices available on OMAP4xxx devices
*
* This map only defines which clocks are valid and the callback functions
* for clock activate, deactivate, etc. It is used by the top level omap_prcm
* driver.
*
* The actual details of the clocks (config registers, bit fields, sources,
* etc) are in the private g_omap3_clk_details array below.
*
*/
#define OMAP4_GENERIC_CLOCK_DEV(i) \
{ .id = (i), \
.clk_activate = omap4_clk_generic_activate, \
.clk_deactivate = omap4_clk_generic_deactivate, \
.clk_set_source = omap4_clk_generic_set_source, \
.clk_accessible = omap4_clk_generic_accessible, \
.clk_get_source_freq = omap4_clk_generic_get_source_freq \
}
#define OMAP4_GPTIMER_CLOCK_DEV(i) \
{ .id = (i), \
.clk_activate = omap4_clk_generic_activate, \
.clk_deactivate = omap4_clk_generic_deactivate, \
.clk_set_source = omap4_clk_gptimer_set_source, \
.clk_accessible = omap4_clk_generic_accessible, \
.clk_get_source_freq = omap4_clk_gptimer_get_source_freq \
}
#define OMAP4_HSMMC_CLOCK_DEV(i) \
{ .id = (i), \
.clk_activate = omap4_clk_generic_activate, \
.clk_deactivate = omap4_clk_generic_deactivate, \
.clk_set_source = omap4_clk_hsmmc_set_source, \
.clk_accessible = omap4_clk_generic_accessible, \
.clk_get_source_freq = omap4_clk_hsmmc_get_source_freq \
}
#define OMAP4_HSUSBHOST_CLOCK_DEV(i) \
{ .id = (i), \
.clk_activate = omap4_clk_hsusbhost_activate, \
.clk_deactivate = omap4_clk_hsusbhost_deactivate, \
.clk_set_source = omap4_clk_hsusbhost_set_source, \
.clk_accessible = omap4_clk_hsusbhost_accessible, \
.clk_get_source_freq = NULL \
}
struct ti_clock_dev ti_clk_devmap[] = {
/* System clocks */
{ .id = SYS_CLK,
.clk_activate = NULL,
.clk_deactivate = NULL,
.clk_set_source = NULL,
.clk_accessible = NULL,
.clk_get_source_freq = omap4_clk_get_sysclk_freq,
},
/* MPU (ARM) core clocks */
{ .id = MPU_CLK,
.clk_activate = NULL,
.clk_deactivate = NULL,
.clk_set_source = NULL,
.clk_accessible = NULL,
.clk_get_source_freq = omap4_clk_get_arm_fclk_freq,
},
/* UART device clocks */
OMAP4_GENERIC_CLOCK_DEV(UART1_CLK),
OMAP4_GENERIC_CLOCK_DEV(UART2_CLK),
OMAP4_GENERIC_CLOCK_DEV(UART3_CLK),
OMAP4_GENERIC_CLOCK_DEV(UART4_CLK),
/* Timer device source clocks */
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER1_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER2_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER3_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER4_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER5_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER6_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER7_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER8_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER9_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER10_CLK),
OMAP4_GPTIMER_CLOCK_DEV(GPTIMER11_CLK),
/* MMC device clocks (MMC1 and MMC2 can have different input clocks) */
OMAP4_HSMMC_CLOCK_DEV(MMC1_CLK),
OMAP4_HSMMC_CLOCK_DEV(MMC2_CLK),
OMAP4_GENERIC_CLOCK_DEV(MMC3_CLK),
OMAP4_GENERIC_CLOCK_DEV(MMC4_CLK),
OMAP4_GENERIC_CLOCK_DEV(MMC5_CLK),
/* USB HS (high speed TLL, EHCI and OHCI) */
OMAP4_HSUSBHOST_CLOCK_DEV(USBTLL_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBHSHOST_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBFSHOST_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBP1_PHY_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBP2_PHY_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBP1_UTMI_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBP2_UTMI_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBP1_HSIC_CLK),
OMAP4_HSUSBHOST_CLOCK_DEV(USBP2_HSIC_CLK),
/* GPIO */
OMAP4_GENERIC_CLOCK_DEV(GPIO1_CLK),
OMAP4_GENERIC_CLOCK_DEV(GPIO2_CLK),
OMAP4_GENERIC_CLOCK_DEV(GPIO3_CLK),
OMAP4_GENERIC_CLOCK_DEV(GPIO4_CLK),
OMAP4_GENERIC_CLOCK_DEV(GPIO5_CLK),
OMAP4_GENERIC_CLOCK_DEV(GPIO6_CLK),
/* sDMA */
OMAP4_GENERIC_CLOCK_DEV(SDMA_CLK),
/* I2C */
OMAP4_GENERIC_CLOCK_DEV(I2C1_CLK),
OMAP4_GENERIC_CLOCK_DEV(I2C2_CLK),
OMAP4_GENERIC_CLOCK_DEV(I2C3_CLK),
OMAP4_GENERIC_CLOCK_DEV(I2C4_CLK),
{ INVALID_CLK_IDENT, NULL, NULL, NULL, NULL }
};
/**
* omap4_clk_details - Stores details for all the different clocks supported
*
* Whenever an operation on a clock is being performed (activated, deactivated,
* etc) this array is looked up to find the correct register and bit(s) we
* should be modifying.
*
*/
struct omap4_clk_details {
clk_ident_t id;
uint32_t mem_region;
uint32_t clksel_reg;
int32_t src_freq;
uint32_t enable_mode;
};
#define OMAP4_GENERIC_CLOCK_DETAILS(i, f, m, r, e) \
{ .id = (i), \
.mem_region = (m), \
.clksel_reg = (r), \
.src_freq = (f), \
.enable_mode = (e), \
}
static struct omap4_clk_details g_omap4_clk_details[] = {
/* UART */
OMAP4_GENERIC_CLOCK_DETAILS(UART1_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0140), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(UART2_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0148), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(UART3_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0140), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(UART4_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0148), CLKCTRL_MODULEMODE_ENABLE),
/* General purpose timers */
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER1_CLK, -1, PRM_INSTANCE_MEM_REGION,
(WKUP_CM_OFFSET + 0x040), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER2_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x038), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER3_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x040), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER4_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x048), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER5_CLK, -1, CM1_INSTANCE_MEM_REGION,
(ABE_CM1_OFFSET + 0x068), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER6_CLK, -1, CM1_INSTANCE_MEM_REGION,
(ABE_CM1_OFFSET + 0x070), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER7_CLK, -1, CM1_INSTANCE_MEM_REGION,
(ABE_CM1_OFFSET + 0x078), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER8_CLK, -1, CM1_INSTANCE_MEM_REGION,
(ABE_CM1_OFFSET + 0x080), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER9_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x050), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER10_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x028), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(GPTIMER11_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x030), CLKCTRL_MODULEMODE_ENABLE),
/* HSMMC (MMC1 and MMC2 can have different input clocks) */
OMAP4_GENERIC_CLOCK_DETAILS(MMC1_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L3INIT_CM2_OFFSET + 0x028), /*CLKCTRL_MODULEMODE_ENABLE*/2),
OMAP4_GENERIC_CLOCK_DETAILS(MMC2_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L3INIT_CM2_OFFSET + 0x030), /*CLKCTRL_MODULEMODE_ENABLE*/2),
OMAP4_GENERIC_CLOCK_DETAILS(MMC3_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x120), /*CLKCTRL_MODULEMODE_ENABLE*/2),
OMAP4_GENERIC_CLOCK_DETAILS(MMC4_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x128), /*CLKCTRL_MODULEMODE_ENABLE*/2),
OMAP4_GENERIC_CLOCK_DETAILS(MMC5_CLK, FREQ_48MHZ, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x160), /*CLKCTRL_MODULEMODE_ENABLE*/1),
/* GPIO modules */
OMAP4_GENERIC_CLOCK_DETAILS(GPIO1_CLK, -1, PRM_INSTANCE_MEM_REGION,
(WKUP_CM_OFFSET + 0x038), CLKCTRL_MODULEMODE_AUTO),
OMAP4_GENERIC_CLOCK_DETAILS(GPIO2_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x060), CLKCTRL_MODULEMODE_AUTO),
OMAP4_GENERIC_CLOCK_DETAILS(GPIO3_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x068), CLKCTRL_MODULEMODE_AUTO),
OMAP4_GENERIC_CLOCK_DETAILS(GPIO4_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x070), CLKCTRL_MODULEMODE_AUTO),
OMAP4_GENERIC_CLOCK_DETAILS(GPIO5_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x078), CLKCTRL_MODULEMODE_AUTO),
OMAP4_GENERIC_CLOCK_DETAILS(GPIO6_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x080), CLKCTRL_MODULEMODE_AUTO),
/* sDMA block */
OMAP4_GENERIC_CLOCK_DETAILS(SDMA_CLK, -1, CM2_INSTANCE_MEM_REGION,
(CORE_CM2_OFFSET + 0x300), CLKCTRL_MODULEMODE_AUTO),
/* I2C modules */
OMAP4_GENERIC_CLOCK_DETAILS(I2C1_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0A0), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(I2C2_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0A8), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(I2C3_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0B0), CLKCTRL_MODULEMODE_ENABLE),
OMAP4_GENERIC_CLOCK_DETAILS(I2C4_CLK, -1, CM2_INSTANCE_MEM_REGION,
(L4PER_CM2_OFFSET + 0x0B8), CLKCTRL_MODULEMODE_ENABLE),
{ INVALID_CLK_IDENT, 0, 0, 0, 0 },
};
/**
* MAX_MODULE_ENABLE_WAIT - the number of loops to wait for the module to come
* alive.
*
*/
#define MAX_MODULE_ENABLE_WAIT 100
/**
* ARRAY_SIZE - Macro to return the number of elements in a static const array.
*
*/
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
/**
* omap4_clk_details - writes a 32-bit value to one of the timer registers
* @timer: Timer device context
* @off: The offset of a register from the timer register address range
* @val: The value to write into the register
*
*
* RETURNS:
* nothing
*/
static struct omap4_clk_details*
omap4_clk_details(clk_ident_t id)
{
struct omap4_clk_details *walker;
for (walker = g_omap4_clk_details; walker->id != INVALID_CLK_IDENT; walker++) {
if (id == walker->id)
return (walker);
}
return NULL;
}
/**
* omap4_clk_generic_activate - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a positive error code on failure.
*/
static int
omap4_clk_generic_activate(struct ti_clock_dev *clkdev)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
uint32_t clksel;
unsigned int i;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
/* All the 'generic' clocks have a CLKCTRL register which is more or less
* generic - the have at least two fielda called MODULEMODE and IDLEST.
*/
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
clksel &= ~CLKCTRL_MODULEMODE_MASK;
clksel |= clk_details->enable_mode;
bus_write_4(clk_mem_res, clk_details->clksel_reg, clksel);
/* Now poll on the IDLEST register to tell us if the module has come up.
* TODO: We need to take into account the parent clocks.
*/
/* Try MAX_MODULE_ENABLE_WAIT number of times to check if enabled */
for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
if ((clksel & CLKCTRL_IDLEST_MASK) == CLKCTRL_IDLEST_ENABLED)
break;
DELAY(10);
}
/* Check the enabled state */
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED) {
printf("Error: failed to enable module with clock %d\n", clkdev->id);
printf("Error: 0x%08x => 0x%08x\n", clk_details->clksel_reg, clksel);
return (ETIMEDOUT);
}
return (0);
}
/**
* omap4_clk_generic_deactivate - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a positive error code on failure.
*/
static int
omap4_clk_generic_deactivate(struct ti_clock_dev *clkdev)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
uint32_t clksel;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
/* All the 'generic' clocks have a CLKCTRL register which is more or less
* generic - the have at least two fielda called MODULEMODE and IDLEST.
*/
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
clksel &= ~CLKCTRL_MODULEMODE_MASK;
clksel |= CLKCTRL_MODULEMODE_DISABLE;
bus_write_4(clk_mem_res, clk_details->clksel_reg, clksel);
return (0);
}
/**
* omap4_clk_generic_set_source - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a positive error code on failure.
*/
static int
omap4_clk_generic_set_source(struct ti_clock_dev *clkdev,
clk_src_t clksrc)
{
return (0);
}
/**
* omap4_clk_generic_accessible - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a negative error code on failure.
*/
static int
omap4_clk_generic_accessible(struct ti_clock_dev *clkdev)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
uint32_t clksel;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
/* Check the enabled state */
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED)
return (0);
return (1);
}
/**
* omap4_clk_generic_get_source_freq - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a negative error code on failure.
*/
static int
omap4_clk_generic_get_source_freq(struct ti_clock_dev *clkdev,
unsigned int *freq
)
{
struct omap4_clk_details* clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
/* Simply return the stored frequency */
if (freq)
*freq = (unsigned int)clk_details->src_freq;
return (0);
}
/**
* omap4_clk_gptimer_set_source - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a negative error code on failure.
*/
static int
omap4_clk_gptimer_set_source(struct ti_clock_dev *clkdev,
clk_src_t clksrc)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
/* TODO: Implement */
return (0);
}
/**
* omap4_clk_gptimer_get_source_freq - checks if a module is accessible
* @module: identifier for the module to check, see omap3_prcm.h for a list
* of possible modules.
* Example: OMAP3_MODULE_MMC1
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a negative error code on failure.
*/
static int
omap4_clk_gptimer_get_source_freq(struct ti_clock_dev *clkdev,
unsigned int *freq
)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
uint32_t clksel;
unsigned int src_freq;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
/* Need to read the CLKSEL field to determine the clock source */
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
if (clksel & (0x1UL << 24))
src_freq = FREQ_32KHZ;
else
omap4_clk_get_sysclk_freq(NULL, &src_freq);
/* Return the frequency */
if (freq)
*freq = src_freq;
return (0);
}
/**
* omap4_clk_hsmmc_set_source - sets the source clock (freq)
* @clkdev: pointer to the clockdev structure (id field will contain clock id)
*
* The MMC 1 and 2 clocks can be source from either a 64MHz or 96MHz clock.
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a negative error code on failure.
*/
static int
omap4_clk_hsmmc_set_source(struct ti_clock_dev *clkdev,
clk_src_t clksrc)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
uint32_t clksel;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
/* For MMC modules 3, 4 & 5 you can't change the freq, it's always 48MHz */
if ((clkdev->id == MMC3_CLK) || (clkdev->id == MMC4_CLK) ||
(clkdev->id == MMC5_CLK)) {
if (clksrc != F48MHZ_CLK)
return (EINVAL);
return 0;
}
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
/* Bit 24 is set if 96MHz clock or cleared for 64MHz clock */
if (clksrc == F64MHZ_CLK)
clksel &= ~(0x1UL << 24);
else if (clksrc == F96MHZ_CLK)
clksel |= (0x1UL << 24);
else
return (EINVAL);
bus_write_4(clk_mem_res, clk_details->clksel_reg, clksel);
return (0);
}
/**
* omap4_clk_hsmmc_get_source_freq - checks if a module is accessible
* @clkdev: pointer to the clockdev structure (id field will contain clock id)
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a negative error code on failure.
*/
static int
omap4_clk_hsmmc_get_source_freq(struct ti_clock_dev *clkdev,
unsigned int *freq
)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct omap4_clk_details* clk_details;
struct resource* clk_mem_res;
uint32_t clksel;
unsigned int src_freq;
if (sc == NULL)
return ENXIO;
clk_details = omap4_clk_details(clkdev->id);
if (clk_details == NULL)
return (ENXIO);
clk_mem_res = sc->sc_res[clk_details->mem_region];
if (clk_mem_res == NULL)
return (EINVAL);
switch (clkdev->id) {
case MMC1_CLK:
case MMC2_CLK:
/* Need to read the CLKSEL field to determine the clock source */
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
if (clksel & (0x1UL << 24))
src_freq = FREQ_96MHZ;
else
src_freq = FREQ_64MHZ;
break;
case MMC3_CLK:
case MMC4_CLK:
case MMC5_CLK:
src_freq = FREQ_48MHZ;
break;
default:
return (EINVAL);
}
/* Return the frequency */
if (freq)
*freq = src_freq;
return (0);
}
/**
* omap4_clk_get_sysclk_freq - gets the sysclk frequency
* @sc: pointer to the clk module/device context
*
* Read the clocking information from the power-control/boot-strap registers,
* and stored in two global variables.
*
* RETURNS:
* nothing, values are saved in global variables
*/
static int
omap4_clk_get_sysclk_freq(struct ti_clock_dev *clkdev,
unsigned int *freq)
{
uint32_t clksel;
uint32_t sysclk;
struct omap4_prcm_softc *sc = omap4_prcm_sc;
if (sc == NULL)
return ENXIO;
/* Read the input clock freq from the configuration register (CM_SYS_CLKSEL) */
clksel = bus_read_4(sc->sc_res[PRM_INSTANCE_MEM_REGION], CM_SYS_CLKSEL_OFFSET);
switch (clksel & 0x7) {
case 0x1:
/* 12Mhz */
sysclk = 12000000;
break;
case 0x3:
/* 16.8Mhz */
sysclk = 16800000;
break;
case 0x4:
/* 19.2Mhz */
sysclk = 19200000;
break;
case 0x5:
/* 26Mhz */
sysclk = 26000000;
break;
case 0x7:
/* 38.4Mhz */
sysclk = 38400000;
break;
default:
panic("%s: Invalid clock freq", __func__);
}
/* Return the value */
if (freq)
*freq = sysclk;
return (0);
}
/**
* omap4_clk_get_arm_fclk_freq - gets the MPU clock frequency
* @clkdev: ignored
* @freq: pointer which upon return will contain the freq in hz
* @mem_res: array of allocated memory resources
*
* Reads the frequency setting information registers and returns the value
* in the freq variable.
*
* RETURNS:
* returns 0 on success, a positive error code on failure.
*/
static int
omap4_clk_get_arm_fclk_freq(struct ti_clock_dev *clkdev,
unsigned int *freq)
{
uint32_t clksel;
uint32_t pll_mult, pll_div;
uint32_t mpuclk, sysclk;
struct omap4_prcm_softc *sc = omap4_prcm_sc;
if (sc == NULL)
return ENXIO;
/* Read the clksel register which contains the DPLL multiple and divide
* values. These are applied to the sysclk.
*/
clksel = bus_read_4(sc->sc_res[CM1_INSTANCE_MEM_REGION], CM_CLKSEL_DPLL_MPU);
pll_mult = ((clksel >> 8) & 0x7ff);
pll_div = (clksel & 0x7f) + 1;
/* Get the system clock freq */
omap4_clk_get_sysclk_freq(NULL, &sysclk);
/* Calculate the MPU freq */
mpuclk = (sysclk * pll_mult) / pll_div;
/* Return the value */
if (freq)
*freq = mpuclk;
return (0);
}
/**
* omap4_clk_hsusbhost_activate - activates the USB clocks for the given module
* @clkdev: pointer to the clock device structure.
* @mem_res: array of memory resouces allocated by the top level PRCM driver.
*
* The USB clocking setup seems to be a bit more tricky than the other modules,
* to start with the clocking diagram for the HS host module shows 13 different
* clocks. So to try and make it easier to follow the clocking activation
* and deactivation is handled in it's own set of callbacks.
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a positive error code on failure.
*/
struct dpll_param {
unsigned int m;
unsigned int n;
unsigned int m2;
unsigned int m3;
unsigned int m4;
unsigned int m5;
unsigned int m6;
unsigned int m7;
};
/* USB parameters */
struct dpll_param usb_dpll_param[7] = {
/* 12M values */
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
/* 13M values */
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
/* 16.8M values */
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
/* 19.2M values */
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
/* 26M values */
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
/* 27M values */
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
/* 38.4M values */
#ifdef CONFIG_OMAP4_SDC
{0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0},
#else
{0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0},
#endif
};
static int
omap4_clk_hsusbhost_activate(struct ti_clock_dev *clkdev)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct resource* clk_mem_res;
uint32_t clksel_reg_off;
uint32_t clksel;
unsigned int i;
if (sc == NULL)
return ENXIO;
switch (clkdev->id) {
case USBTLL_CLK:
/* For the USBTLL module we need to enable the following clocks:
* - INIT_L4_ICLK (will be enabled by bootloader)
* - TLL_CH0_FCLK
* - TLL_CH1_FCLK
*/
/* We need the CM_L3INIT_HSUSBTLL_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x68;
/* Enable the module and also enable the optional func clocks for
* channels 0 & 1 (is this needed ?)
*/
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
clksel &= ~CLKCTRL_MODULEMODE_MASK;
clksel |= CLKCTRL_MODULEMODE_ENABLE;
clksel |= (0x1 << 8); /* USB-HOST optional clock: USB_CH0_CLK */
clksel |= (0x1 << 9); /* USB-HOST optional clock: USB_CH1_CLK */
break;
case USBHSHOST_CLK:
case USBP1_PHY_CLK:
case USBP2_PHY_CLK:
case USBP1_UTMI_CLK:
case USBP2_UTMI_CLK:
case USBP1_HSIC_CLK:
case USBP2_HSIC_CLK:
/* For the USB HS HOST module we need to enable the following clocks:
* - INIT_L4_ICLK (will be enabled by bootloader)
* - INIT_L3_ICLK (will be enabled by bootloader)
* - INIT_48MC_FCLK
* - UTMI_ROOT_GFCLK (UTMI only, create a new clock for that ?)
* - UTMI_P1_FCLK (UTMI only, create a new clock for that ?)
* - UTMI_P2_FCLK (UTMI only, create a new clock for that ?)
* - HSIC_P1_60 (HSIC only, create a new clock for that ?)
* - HSIC_P1_480 (HSIC only, create a new clock for that ?)
* - HSIC_P2_60 (HSIC only, create a new clock for that ?)
* - HSIC_P2_480 (HSIC only, create a new clock for that ?)
*/
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
/* Enable the module and also enable the optional func clocks */
if (clkdev->id == USBHSHOST_CLK) {
clksel &= ~CLKCTRL_MODULEMODE_MASK;
clksel |= /*CLKCTRL_MODULEMODE_ENABLE*/2;
clksel |= (0x1 << 15); /* USB-HOST clock control: FUNC48MCLK */
}
else if (clkdev->id == USBP1_UTMI_CLK)
clksel |= (0x1 << 8); /* UTMI_P1_CLK */
else if (clkdev->id == USBP2_UTMI_CLK)
clksel |= (0x1 << 9); /* UTMI_P2_CLK */
else if (clkdev->id == USBP1_HSIC_CLK)
clksel |= (0x5 << 11); /* HSIC60M_P1_CLK + HSIC480M_P1_CLK */
else if (clkdev->id == USBP2_HSIC_CLK)
clksel |= (0x5 << 12); /* HSIC60M_P2_CLK + HSIC480M_P2_CLK */
break;
default:
return (EINVAL);
}
bus_write_4(clk_mem_res, clksel_reg_off, clksel);
/* Try MAX_MODULE_ENABLE_WAIT number of times to check if enabled */
for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
if ((clksel & CLKCTRL_IDLEST_MASK) == CLKCTRL_IDLEST_ENABLED)
break;
}
/* Check the enabled state */
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED) {
printf("Error: HERE failed to enable module with clock %d\n", clkdev->id);
printf("Error: 0x%08x => 0x%08x\n", clksel_reg_off, clksel);
return (ETIMEDOUT);
}
return (0);
}
/**
* omap4_clk_generic_deactivate - checks if a module is accessible
* @clkdev: pointer to the clock device structure.
* @mem_res: array of memory resouces allocated by the top level PRCM driver.
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 on success or a positive error code on failure.
*/
static int
omap4_clk_hsusbhost_deactivate(struct ti_clock_dev *clkdev)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct resource* clk_mem_res;
uint32_t clksel_reg_off;
uint32_t clksel;
if (sc == NULL)
return ENXIO;
switch (clkdev->id) {
case USBTLL_CLK:
/* We need the CM_L3INIT_HSUSBTLL_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x68;
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
clksel &= ~CLKCTRL_MODULEMODE_MASK;
clksel |= CLKCTRL_MODULEMODE_DISABLE;
break;
case USBHSHOST_CLK:
case USBP1_PHY_CLK:
case USBP2_PHY_CLK:
case USBP1_UTMI_CLK:
case USBP2_UTMI_CLK:
case USBP1_HSIC_CLK:
case USBP2_HSIC_CLK:
/* For the USB HS HOST module we need to enable the following clocks:
* - INIT_L4_ICLK (will be enabled by bootloader)
* - INIT_L3_ICLK (will be enabled by bootloader)
* - INIT_48MC_FCLK
* - UTMI_ROOT_GFCLK (UTMI only, create a new clock for that ?)
* - UTMI_P1_FCLK (UTMI only, create a new clock for that ?)
* - UTMI_P2_FCLK (UTMI only, create a new clock for that ?)
* - HSIC_P1_60 (HSIC only, create a new clock for that ?)
* - HSIC_P1_480 (HSIC only, create a new clock for that ?)
* - HSIC_P2_60 (HSIC only, create a new clock for that ?)
* - HSIC_P2_480 (HSIC only, create a new clock for that ?)
*/
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
/* Enable the module and also enable the optional func clocks */
if (clkdev->id == USBHSHOST_CLK) {
clksel &= ~CLKCTRL_MODULEMODE_MASK;
clksel |= CLKCTRL_MODULEMODE_DISABLE;
clksel &= ~(0x1 << 15); /* USB-HOST clock control: FUNC48MCLK */
}
else if (clkdev->id == USBP1_UTMI_CLK)
clksel &= ~(0x1 << 8); /* UTMI_P1_CLK */
else if (clkdev->id == USBP2_UTMI_CLK)
clksel &= ~(0x1 << 9); /* UTMI_P2_CLK */
else if (clkdev->id == USBP1_HSIC_CLK)
clksel &= ~(0x5 << 11); /* HSIC60M_P1_CLK + HSIC480M_P1_CLK */
else if (clkdev->id == USBP2_HSIC_CLK)
clksel &= ~(0x5 << 12); /* HSIC60M_P2_CLK + HSIC480M_P2_CLK */
break;
default:
return (EINVAL);
}
bus_write_4(clk_mem_res, clksel_reg_off, clksel);
return (0);
}
/**
* omap4_clk_hsusbhost_accessible - checks if a module is accessible
* @clkdev: pointer to the clock device structure.
* @mem_res: array of memory resouces allocated by the top level PRCM driver.
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 if module is not enable, 1 if module is enabled or a negative
* error code on failure.
*/
static int
omap4_clk_hsusbhost_accessible(struct ti_clock_dev *clkdev)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct resource* clk_mem_res;
uint32_t clksel_reg_off;
uint32_t clksel;
if (sc == NULL)
return ENXIO;
if (clkdev->id == USBTLL_CLK) {
/* We need the CM_L3INIT_HSUSBTLL_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x68;
}
else if (clkdev->id == USBHSHOST_CLK) {
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
}
else {
return (EINVAL);
}
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
/* Check the enabled state */
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED)
return (0);
return (1);
}
/**
* omap4_clk_hsusbhost_set_source - sets the source clocks
* @clkdev: pointer to the clock device structure.
* @clksrc: the clock source ID for the given clock.
* @mem_res: array of memory resouces allocated by the top level PRCM driver.
*
*
*
* LOCKING:
* Inherits the locks from the omap_prcm driver, no internal locking.
*
* RETURNS:
* Returns 0 if sucessful otherwise a negative error code on failure.
*/
static int
omap4_clk_hsusbhost_set_source(struct ti_clock_dev *clkdev,
clk_src_t clksrc)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
struct resource* clk_mem_res;
uint32_t clksel_reg_off;
uint32_t clksel;
unsigned int bit;
if (sc == NULL)
return ENXIO;
if (clkdev->id == USBP1_PHY_CLK)
bit = 24;
else if (clkdev->id != USBP2_PHY_CLK)
bit = 25;
else
return (EINVAL);
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
clk_mem_res = sc->sc_res[CM2_INSTANCE_MEM_REGION];
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
/* Set the clock source to either external or internal */
if (clksrc == EXT_CLK)
clksel |= (0x1 << bit);
else
clksel &= ~(0x1 << bit);
bus_write_4(clk_mem_res, clksel_reg_off, clksel);
return (0);
}
#define PRM_RSTCTRL 0x1b00
#define PRM_RSTCTRL_RESET 0x2
static void
omap4_prcm_reset(void)
{
struct omap4_prcm_softc *sc = omap4_prcm_sc;
bus_write_4(sc->sc_res[0], PRM_RSTCTRL,
bus_read_4(sc->sc_res[0], PRM_RSTCTRL) | PRM_RSTCTRL_RESET);
bus_read_4(sc->sc_res[0], PRM_RSTCTRL);
}
/**
* omap4_prcm_probe - probe function for the driver
* @dev: prcm device handle
*
* Simply sets the name of the driver module.
*
* LOCKING:
* None
*
* RETURNS:
* Always returns 0
*/
static int
omap4_prcm_probe(device_t dev)
{
if (!ofw_bus_is_compatible(dev, "ti,omap4_prcm"))
return (ENXIO);
device_set_desc(dev, "TI OMAP Power, Reset and Clock Management");
return (0);
}
/**
* omap_prcm_attach - attach function for the driver
* @dev: prcm device handle
*
* Allocates and sets up the driver context, this simply entails creating a
* bus mappings for the PRCM register set.
*
* LOCKING:
* None
*
* RETURNS:
* Always returns 0
*/
static int
omap4_prcm_attach(device_t dev)
{
struct omap4_prcm_softc *sc = device_get_softc(dev);
if (bus_alloc_resources(dev, omap4_scm_res_spec, sc->sc_res)) {
device_printf(dev, "could not allocate resources\n");
return (ENXIO);
}
omap4_prcm_sc = sc;
ti_cpu_reset = omap4_prcm_reset;
return (0);
}
static device_method_t omap4_prcm_methods[] = {
DEVMETHOD(device_probe, omap4_prcm_probe),
DEVMETHOD(device_attach, omap4_prcm_attach),
{0, 0},
};
static driver_t omap4_prcm_driver = {
"omap4_prcm",
omap4_prcm_methods,
sizeof(struct omap4_prcm_softc),
};
static devclass_t omap4_prcm_devclass;
DRIVER_MODULE(omap4_prcm, simplebus, omap4_prcm_driver, omap4_prcm_devclass, 0, 0);
MODULE_VERSION(omap4_prcm, 1);
Reference in New Issue Copy Permalink