freebsd-dev/sys/i4b/tina-dd/i4b_tina_ioctl.h

139 lines
6.2 KiB
C
Raw Normal View History

/*
* Copyright (c) 1994, 1998 Hellmuth Michaelis. All rights reserved.
*
* Based on code written by Stollmann GmbH, Hamburg. Many thanks to
* Christian Luehrs and Manfred Jung for docs, sources and answers!
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* i4b_tina_ioctl.h - i4b Stollman Tina-dd ioctl header file
* ---------------------------------------------------------
*
* $Id: i4b_tina_ioctl.h,v 1.2 1998/12/05 18:06:20 hm Exp $
*
* last edit-date: [Sat Dec 5 18:41:51 1998]
*
*---------------------------------------------------------------------------*/
#ifndef _I4B_TINA_IOCTL_H_
#define _I4B_TINA_IOCTL_H_
#define TINA_IOSIZE 8 /* 8 byte wide iospace occupied */
/*---------------------------------------------------------------------------*
* register offsets in i/o address space
*---------------------------------------------------------------------------*/
#define CTRL_STAT 0 /* control & status */
#define ADDR_CNTL 1 /* address pointer low */
#define ADDR_CNTM 2 /* address pointer mid */
#define ADDR_CNTH 3 /* address pointer high */
#define DATA_LOW 4 /* data register low */
#define DATA_HIGH 5 /* data register high */
#define DATA_LOW_INC 6 /* data register low, post inc */
#define DATA_HIGH_INC 7 /* data register high, post inc */
/*---------------------------------------------------------------------------*
* status register (CTRL_STAT read access)
*---------------------------------------------------------------------------*/
#define CR_INTC 0x80 /* irq FROM tina-dd TO pc active */
#define CR_INTP 0x40 /* irq FROM pc TO tina-dd active */
#define CR_INTPA 0x20 /* irq FROM pc TO tina-dd active */
#define CR_NMI 0x10 /* nmi FROM PC TO tina-dd active */
#define CR_FLASHLD 0x08 /* read of the FLASHLD-bit (n/c) */
#define CR_S2C 0x04 /* info bit */
#define CR_S1C 0x02 /* info bit */
#define CR_S0C 0x01 /* info bit */
/*---------------------------------------------------------------------------*
* control register (CTRL_STAT write access)
*---------------------------------------------------------------------------*/
#define CR_CLR_INTC 0x80 /* clear irq on tina-dd */
#define CR_SET_INTP 0x40 /* trigger irq on tina-dd */
#define CR_RESET 0x20 /* reset tina-dd */
#define CR_SET_NMI 0x10 /* trigger nmi on tina-dd */
#define CR_SET_FLASHLD 0x08 /* activates pin FLASHLD (n/c) */
#define CR_S2P 0x04 /* info bit (not readable !) */
#define CR_S1P 0x02 /* info bit (not readable !) */
#define CR_S0P 0x01 /* info bit (not readable !) */
/*---------------------------------------------------------------------------*
* misc definitions in dual-ported mem on board of tina-dd
*---------------------------------------------------------------------------*/
#define FW_SYSCB 0x200 /* address of FW SYSCB / MJ 300392 */
#define FW_SINFO_NAME 0x220 /* address of general info label */
#define FW_HW_TYPE 0x224 /* address of hardware type byte: */
#define FW_HW_UNDEF 0x00 /* undefined .. */
#define FW_HW_TINA_DD 0x10 /* TINA-dd */
#define FW_HW_TINA_DS 0x20 /* TINA-ds (B channel/ser ?) */
#define FW_HW_TINA_D 0x30 /* TINA-d (one B channel ?) */
#define FW_HW_TINA_DDM 0x40 /* TINA-dd with fax module */
#define FW_HW_TINA_DDS 0x50 /* TINA-dd with fax/voice module */
#define FW_HW_SICCE 0x80 /* X.25 board */
#define FW_HW_ASIC 0x01 /* ASIC version bit */
#define FW_STAT 0x228 /* address of firmware status byte */
#define FW_READY 0x20 /* firmware ready bit */
#define FW_BOOTPRM_RDY 0x02 /* boot PROM ready */
#define FW_UNDEF_0 0x00 /* undefined */
#define FW_UNDEF_1 0xFF /* undefined */
#define FW_SINFO_ID "SYSI" /* general info label for FW > 2.13*/
#define FW_SINFO_ID_LEN 4
#define FW_ADDR_PROFPTR 0x260 /* addr of ptr to board profile */
/*===========================================================================*
* Layer 0 - Hardware layer
*===========================================================================*/
/* control and status register access */
#define ISDN_GETCSR _IOR('I', 1, unsigned char) /* get csr */
#define ISDN_SETCSR _IOW('I', 2, unsigned char) /* set csr */
/* dual ported ram access */
#define ISDN_GETBLK _IOWR('I', 3, struct record) /* get dpr record */
#define ISDN_SETBLK _IOW('I', 4, struct record) /* set dpr record */
/*---------------------------------------------------------------------------*
* record structure for dual ported ram block rd/wr
*---------------------------------------------------------------------------*/
struct record {
unsigned int length; /* length of data block */
unsigned int addr; /* address of mem on tina-dd board */
unsigned char *data; /* pointer to the datablock itself */
};
#endif /* _I4B_TINA_IOCTL_H_ */