freebsd-dev/sbin/camcontrol/modeedit.c

1215 lines
35 KiB
C
Raw Normal View History

This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
* Copyright (c) 2000 Kelly Yancey <kbyanc@posi.net>
* Derived from work done by Julian Elischer <julian@tfs.com,
* julian@dialix.oz.au>, 1993, and Peter Dufault <dufault@hda.com>, 1994.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
2003-05-02 06:49:10 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/sbuf.h>
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#include <assert.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <stdlib.h>
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#include <string.h>
#include <stdio.h>
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#include <sysexits.h>
#include <unistd.h>
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#include <cam/scsi/scsi_all.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <camlib.h>
#include "camcontrol.h"
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#define DEFAULT_SCSI_MODE_DB "/usr/share/misc/scsi_modes"
#define DEFAULT_EDITOR "vi"
#define MAX_FORMAT_SPEC 4096 /* Max CDB format specifier. */
#define MAX_PAGENUM_LEN 10 /* Max characters in page num. */
#define MAX_PAGENAME_LEN 64 /* Max characters in page name. */
#define PAGEDEF_START '{' /* Page definition delimiter. */
#define PAGEDEF_END '}' /* Page definition delimiter. */
#define PAGENAME_START '"' /* Page name delimiter. */
#define PAGENAME_END '"' /* Page name delimiter. */
#define PAGEENTRY_END ';' /* Page entry terminator (optional). */
#define MAX_DATA_SIZE 4096 /* Mode/Log sense data buffer size. */
#define PAGE_CTRL_SHIFT 6 /* Bit offset to page control field. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct editentry {
STAILQ_ENTRY(editentry) link;
char *name;
char type;
int editable;
int size;
union {
int ivalue;
char *svalue;
} value;
};
static STAILQ_HEAD(, editentry) editlist; /* List of page entries. */
static int editlist_changed = 0; /* Whether any entries were changed. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct pagename {
SLIST_ENTRY(pagename) link;
int page;
int subpage;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
char *name;
};
static SLIST_HEAD(, pagename) namelist; /* Page number to name mappings. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static char format[MAX_FORMAT_SPEC]; /* Buffer for scsi cdb format def. */
static FILE *edit_file = NULL; /* File handle for edit file. */
static char edit_path[] = "/tmp/camXXXXXX";
/* Function prototypes. */
static void editentry_create(void *hook, int letter, void *arg,
int count, char *name);
static void editentry_update(void *hook, int letter, void *arg,
int count, char *name);
static void editentry_create_desc(void *hook, int letter, void *arg,
int count, char *name);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static int editentry_save(void *hook, char *name);
static struct editentry *editentry_lookup(char *name);
static int editentry_set(char *name, char *newvalue,
int editonly);
static void editlist_populate(struct cam_device *device,
int cdb_len, int dbd, int pc, int page, int subpage,
int task_attr, int retries, int timeout);
static void editlist_populate_desc(struct cam_device *device,
int cdb_len, int llbaa, int pc, int page,
int subpage, int task_attr, int retries,
int timeout);
static void editlist_save(struct cam_device *device, int cdb_len,
int dbd, int pc, int page, int subpage,
int task_attr, int retries, int timeout);
static void editlist_save_desc(struct cam_device *device, int cdb_len,
int llbaa, int pc, int page, int subpage,
int task_attr, int retries, int timeout);
static void nameentry_create(int page, int subpage, char *name);
static struct pagename *nameentry_lookup(int page, int subpage);
static int load_format(const char *pagedb_path, int lpage,
int lsubpage);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static int modepage_write(FILE *file, int editonly);
static int modepage_read(FILE *file);
static void modepage_edit(void);
static void modepage_dump(struct cam_device *device, int cdb_len,
int dbd, int pc, int page, int subpage,
int task_attr, int retries, int timeout);
static void modepage_dump_desc(struct cam_device *device,
int cdb_len, int llbaa, int pc, int page,
int subpage, int task_attr, int retries,
int timeout);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static void cleanup_editfile(void);
#define returnerr(code) do { \
errno = code; \
return (-1); \
} while (0)
#define RTRIM(string) do { \
2003-08-22 01:56:17 +00:00
int _length; \
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
while (isspace(string[_length = strlen(string) - 1])) \
string[_length] = '\0'; \
} while (0)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static void
editentry_create(void *hook __unused, int letter, void *arg, int count,
char *name)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct editentry *newentry; /* Buffer to hold new entry. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Allocate memory for the new entry and a copy of the entry name. */
if ((newentry = malloc(sizeof(struct editentry))) == NULL ||
(newentry->name = strdup(name)) == NULL)
err(EX_OSERR, NULL);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Trim any trailing whitespace for the entry name. */
RTRIM(newentry->name);
newentry->editable = (arg != NULL);
newentry->type = letter;
newentry->size = count; /* Placeholder; not accurate. */
newentry->value.svalue = NULL;
STAILQ_INSERT_TAIL(&editlist, newentry, link);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static void
editentry_update(void *hook __unused, int letter, void *arg, int count,
char *name)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct editentry *dest; /* Buffer to hold entry to update. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
dest = editentry_lookup(name);
assert(dest != NULL);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
dest->type = letter;
dest->size = count; /* We get the real size now. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
switch (dest->type) {
case 'i': /* Byte-sized integral type. */
case 'b': /* Bit-sized integral types. */
case 't':
dest->value.ivalue = (intptr_t)arg;
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
case 'c': /* Character array. */
case 'z': /* Null-padded string. */
editentry_set(name, (char *)arg, 0);
break;
default:
; /* NOTREACHED */
}
}
static void
editentry_create_desc(void *hook __unused, int letter, void *arg, int count,
char *name)
{
struct editentry *newentry; /* Buffer to hold new entry. */
/* Allocate memory for the new entry and a copy of the entry name. */
if ((newentry = malloc(sizeof(struct editentry))) == NULL ||
(newentry->name = strdup(name)) == NULL)
err(EX_OSERR, NULL);
/* Trim any trailing whitespace for the entry name. */
RTRIM(newentry->name);
newentry->editable = 1;
newentry->type = letter;
newentry->size = count;
newentry->value.svalue = NULL;
STAILQ_INSERT_TAIL(&editlist, newentry, link);
switch (letter) {
case 'i': /* Byte-sized integral type. */
case 'b': /* Bit-sized integral types. */
case 't':
newentry->value.ivalue = (intptr_t)arg;
break;
case 'c': /* Character array. */
case 'z': /* Null-padded string. */
editentry_set(name, (char *)arg, 0);
break;
default:
; /* NOTREACHED */
}
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static int
editentry_save(void *hook __unused, char *name)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct editentry *src; /* Entry value to save. */
src = editentry_lookup(name);
if (src == 0) {
/*
* This happens if field does not fit into read page size.
* It also means that this field won't be written, so the
* returned value does not really matter.
*/
return (0);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
switch (src->type) {
case 'i': /* Byte-sized integral type. */
case 'b': /* Bit-sized integral types. */
case 't':
return (src->value.ivalue);
/* NOTREACHED */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
case 'c': /* Character array. */
case 'z': /* Null-padded string. */
return ((intptr_t)src->value.svalue);
/* NOTREACHED */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
default:
; /* NOTREACHED */
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return (0); /* This should never happen. */
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static struct editentry *
editentry_lookup(char *name)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct editentry *scan;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
assert(name != NULL);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
STAILQ_FOREACH(scan, &editlist, link) {
if (strcasecmp(scan->name, name) == 0)
return (scan);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Not found during list traversal. */
return (NULL);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static int
editentry_set(char *name, char *newvalue, int editonly)
{
struct editentry *dest; /* Modepage entry to update. */
char *cval; /* Pointer to new string value. */
char *convertend; /* End-of-conversion pointer. */
long long ival, newival; /* New integral value. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
int resolution; /* Resolution in bits for integer conversion. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/*
* Macro to determine the maximum value of the given size for the current
* resolution.
*/
#define RESOLUTION_MAX(size) ((1LL << (resolution * (size))) - 1)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
assert(newvalue != NULL);
if (*newvalue == '\0')
return (0); /* Nothing to do. */
if ((dest = editentry_lookup(name)) == NULL)
returnerr(ENOENT);
if (!dest->editable && editonly)
returnerr(EPERM);
switch (dest->type) {
case 'i': /* Byte-sized integral type. */
case 'b': /* Bit-sized integral types. */
case 't':
/* Convert the value string to an integer. */
resolution = (dest->type == 'i')? 8: 1;
ival = strtoll(newvalue, &convertend, 0);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (*convertend != '\0')
returnerr(EINVAL);
if (ival > RESOLUTION_MAX(dest->size) || ival < 0) {
newival = (ival < 0) ? 0 : RESOLUTION_MAX(dest->size);
warnx("value %lld is out of range for entry %s; "
"clipping to %lld", ival, name, newival);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
ival = newival;
}
if (dest->value.ivalue != ival)
editlist_changed = 1;
dest->value.ivalue = ival;
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
case 'c': /* Character array. */
case 'z': /* Null-padded string. */
if ((cval = malloc(dest->size + 1)) == NULL)
err(EX_OSERR, NULL);
bzero(cval, dest->size + 1);
strncpy(cval, newvalue, dest->size);
if (dest->type == 'z') {
/* Convert trailing spaces to nulls. */
char *convertend2;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
for (convertend2 = cval + dest->size;
convertend2 >= cval; convertend2--) {
if (*convertend2 == ' ')
*convertend2 = '\0';
else if (*convertend2 != '\0')
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
break;
}
}
if (strncmp(dest->value.svalue, cval, dest->size) == 0) {
/* Nothing changed, free the newly allocated string. */
free(cval);
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
if (dest->value.svalue != NULL) {
/* Free the current string buffer. */
free(dest->value.svalue);
dest->value.svalue = NULL;
}
dest->value.svalue = cval;
editlist_changed = 1;
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
default:
; /* NOTREACHED */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return (0);
#undef RESOLUTION_MAX
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static void
nameentry_create(int page, int subpage, char *name) {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct pagename *newentry;
if (page < 0 || subpage < 0 || name == NULL || name[0] == '\0')
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Allocate memory for the new entry and a copy of the entry name. */
if ((newentry = malloc(sizeof(struct pagename))) == NULL ||
(newentry->name = strdup(name)) == NULL)
err(EX_OSERR, NULL);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Trim any trailing whitespace for the page name. */
RTRIM(newentry->name);
newentry->page = page;
newentry->subpage = subpage;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
SLIST_INSERT_HEAD(&namelist, newentry, link);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static struct pagename *
nameentry_lookup(int page, int subpage) {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct pagename *scan;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
SLIST_FOREACH(scan, &namelist, link) {
if (page == scan->page && subpage == scan->subpage)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return (scan);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Not found during list traversal. */
return (NULL);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static int
load_format(const char *pagedb_path, int lpage, int lsubpage)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
FILE *pagedb;
char str_page[MAX_PAGENUM_LEN];
char *str_subpage;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
char str_pagename[MAX_PAGENAME_LEN];
int page;
int subpage;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
int depth; /* Quoting depth. */
int found;
int lineno;
enum { LOCATE, PAGENAME, PAGEDEF } state;
int ch;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
char c;
#define SETSTATE_LOCATE do { \
str_page[0] = '\0'; \
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
str_pagename[0] = '\0'; \
page = -1; \
subpage = -1; \
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
state = LOCATE; \
} while (0)
#define SETSTATE_PAGENAME do { \
str_pagename[0] = '\0'; \
state = PAGENAME; \
} while (0)
#define SETSTATE_PAGEDEF do { \
format[0] = '\0'; \
state = PAGEDEF; \
} while (0)
#define UPDATE_LINENO do { \
if (c == '\n') \
lineno++; \
} while (0)
#define BUFFERFULL(buffer) (strlen(buffer) + 1 >= sizeof(buffer))
if ((pagedb = fopen(pagedb_path, "r")) == NULL)
returnerr(ENOENT);
SLIST_INIT(&namelist);
c = '\0';
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
depth = 0;
lineno = 0;
found = 0;
SETSTATE_LOCATE;
while ((ch = fgetc(pagedb)) != EOF) {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Keep a line count to make error messages more useful. */
UPDATE_LINENO;
/* Skip over comments anywhere in the mode database. */
if (ch == '#') {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
do {
ch = fgetc(pagedb);
} while (ch != '\n' && ch != EOF);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
UPDATE_LINENO;
continue;
}
c = ch;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Strip out newline characters. */
if (c == '\n')
continue;
/* Keep track of the nesting depth for braces. */
if (c == PAGEDEF_START)
depth++;
else if (c == PAGEDEF_END) {
depth--;
if (depth < 0) {
errx(EX_OSFILE, "%s:%d: %s", pagedb_path,
lineno, "mismatched bracket");
}
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
switch (state) {
case LOCATE:
/*
* Locate the page the user is interested in, skipping
* all others.
*/
if (isspace(c)) {
/* Ignore all whitespace between pages. */
break;
} else if (depth == 0 && c == PAGEENTRY_END) {
/*
* A page entry terminator will reset page
* scanning (useful for assigning names to
* modes without providing a mode definition).
*/
/* Record the name of this page. */
str_subpage = str_page;
strsep(&str_subpage, ",");
page = strtol(str_page, NULL, 0);
if (str_subpage)
subpage = strtol(str_subpage, NULL, 0);
else
subpage = 0;
nameentry_create(page, subpage, str_pagename);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
SETSTATE_LOCATE;
} else if (depth == 0 && c == PAGENAME_START) {
SETSTATE_PAGENAME;
} else if (c == PAGEDEF_START) {
str_subpage = str_page;
strsep(&str_subpage, ",");
page = strtol(str_page, NULL, 0);
if (str_subpage)
subpage = strtol(str_subpage, NULL, 0);
else
subpage = 0;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (depth == 1) {
/* Record the name of this page. */
nameentry_create(page, subpage,
str_pagename);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/*
* Only record the format if this is
* the page we are interested in.
*/
if (lpage == page &&
lsubpage == subpage && !found)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
SETSTATE_PAGEDEF;
}
} else if (c == PAGEDEF_END) {
/* Reset the processor state. */
SETSTATE_LOCATE;
} else if (depth == 0 && ! BUFFERFULL(str_page)) {
strncat(str_page, &c, 1);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
} else if (depth == 0) {
errx(EX_OSFILE, "%s:%d: %s %zd %s", pagedb_path,
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
lineno, "page identifier exceeds",
sizeof(str_page) - 1, "characters");
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
case PAGENAME:
if (c == PAGENAME_END) {
/*
* Return to LOCATE state without resetting the
* page number buffer.
*/
state = LOCATE;
} else if (! BUFFERFULL(str_pagename)) {
strncat(str_pagename, &c, 1);
} else {
errx(EX_OSFILE, "%s:%d: %s %zd %s", pagedb_path,
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
lineno, "page name exceeds",
sizeof(str_page) - 1, "characters");
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
case PAGEDEF:
/*
* Transfer the page definition into a format buffer
* suitable for use with CDB encoding/decoding routines.
*/
if (depth == 0) {
found = 1;
SETSTATE_LOCATE;
} else if (! BUFFERFULL(format)) {
strncat(format, &c, 1);
} else {
errx(EX_OSFILE, "%s:%d: %s %zd %s", pagedb_path,
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
lineno, "page definition exceeds",
sizeof(format) - 1, "characters");
}
break;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
default:
; /* NOTREACHED */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
/* Repeat processing loop with next character. */
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (ferror(pagedb))
err(EX_OSFILE, "%s", pagedb_path);
/* Close the SCSI page database. */
fclose(pagedb);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (!found) /* Never found a matching page. */
returnerr(ESRCH);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return (0);
}
static void
editlist_populate(struct cam_device *device, int cdb_len, int dbd, int pc,
int page, int subpage, int task_attr, int retries, int timeout)
{
u_int8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
u_int8_t *mode_pars; /* Pointer to modepage params. */
struct scsi_mode_page_header *mph;
struct scsi_mode_page_header_sp *mphsp;
size_t len;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
STAILQ_INIT(&editlist);
/* Fetch changeable values; use to build initial editlist. */
mode_sense(device, &cdb_len, dbd, 0, 1, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
mph = find_mode_page_6(mh);
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
mph = find_mode_page_10(mh);
}
if ((mph->page_code & SMPH_SPF) == 0) {
mode_pars = (uint8_t *)(mph + 1);
len = mph->page_length;
} else {
mphsp = (struct scsi_mode_page_header_sp *)mph;
mode_pars = (uint8_t *)(mphsp + 1);
len = scsi_2btoul(mphsp->page_length);
}
len = MIN(len, sizeof(data) - (mode_pars - data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Decode the value data, creating edit_entries for each value. */
buff_decode_visit(mode_pars, len, format, editentry_create, 0);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Fetch the current/saved values; use to set editentry values. */
mode_sense(device, &cdb_len, dbd, 0, pc, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
buff_decode_visit(mode_pars, len, format, editentry_update, 0);
}
static void
editlist_populate_desc(struct cam_device *device, int cdb_len, int llbaa, int pc,
int page, int subpage, int task_attr, int retries, int timeout)
{
uint8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
uint8_t *desc; /* Pointer to block descriptor. */
char num[8];
struct sbuf sb;
size_t len;
u_int longlba, dlen, i;
STAILQ_INIT(&editlist);
/* Fetch the current/saved values. */
mode_sense(device, &cdb_len, 0, llbaa, pc, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
desc = (uint8_t *)(mh + 1);
len = mh->blk_desc_len;
longlba = 0;
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
desc = (uint8_t *)(mh + 1);
len = scsi_2btoul(mh->blk_desc_len);
longlba = (mh->flags & SMH_LONGLBA) != 0;
}
dlen = longlba ? 16 : 8;
len = MIN(len, sizeof(data) - (desc - data));
sbuf_new(&sb, format, sizeof(format), SBUF_FIXEDLEN);
num[0] = 0;
for (i = 0; i * dlen < len; i++) {
if (i > 0)
snprintf(num, sizeof(num), " %d", i + 1);
if (longlba) {
sbuf_printf(&sb, "{Number of Logical Blocks%s High} i4\n", num);
sbuf_printf(&sb, "{Number of Logical Blocks%s} i4\n", num);
sbuf_cat(&sb, "{Reserved} *i4\n");
sbuf_printf(&sb, "{Logical Block Length%s} i4\n", num);
} else if (device->pd_type == T_DIRECT) {
sbuf_printf(&sb, "{Number of Logical Blocks%s} i4\n", num);
sbuf_cat(&sb, "{Reserved} *i1\n");
sbuf_printf(&sb, "{Logical Block Length%s} i3\n", num);
} else {
sbuf_printf(&sb, "{Density Code%s} i1\n", num);
sbuf_printf(&sb, "{Number of Logical Blocks%s} i3\n", num);
sbuf_cat(&sb, "{Reserved} *i1\n");
sbuf_printf(&sb, "{Logical Block Length%s} i3\n", num);
}
}
sbuf_finish(&sb);
sbuf_delete(&sb);
/* Decode the value data, creating edit_entries for each value. */
buff_decode_visit(desc, len, format, editentry_create_desc, 0);
}
static void
editlist_save(struct cam_device *device, int cdb_len, int dbd, int pc,
int page, int subpage, int task_attr, int retries, int timeout)
{
u_int8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
u_int8_t *mode_pars; /* Pointer to modepage params. */
struct scsi_mode_page_header *mph;
struct scsi_mode_page_header_sp *mphsp;
size_t len, hlen, mphlen;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Make sure that something changed before continuing. */
if (! editlist_changed)
return;
/* Preload the CDB buffer with the current mode page data. */
mode_sense(device, &cdb_len, dbd, 0, pc, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Initial headers & offsets. */
/*
* Tape drives include write protect (WP), Buffered Mode and Speed
* settings in the device-specific parameter. Clearing this
* parameter on a mode select can have the effect of turning off
* write protect or buffered mode, or changing the speed setting of
* the tape drive.
*
* Disks report DPO/FUA support via the device specific parameter
* for MODE SENSE, but the bit is reserved for MODE SELECT. So we
* clear this for disks (and other non-tape devices) to avoid
* potential errors from the target device.
*/
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
hlen = sizeof(*mh);
/* Eliminate block descriptors. */
if (mh->blk_desc_len > 0) {
bcopy(find_mode_page_6(mh), mh + 1,
mh->data_length + 1 - hlen -
mh->blk_desc_len);
mh->blk_desc_len = 0;
}
mh->data_length = 0; /* Reserved for MODE SELECT command. */
if (device->pd_type != T_SEQUENTIAL)
mh->dev_spec = 0; /* See comment above */
mph = find_mode_page_6(mh);
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
hlen = sizeof(*mh);
/* Eliminate block descriptors. */
if (scsi_2btoul(mh->blk_desc_len) > 0) {
bcopy(find_mode_page_10(mh), mh + 1,
scsi_2btoul(mh->data_length) + 1 - hlen -
scsi_2btoul(mh->blk_desc_len));
scsi_ulto2b(0, mh->blk_desc_len);
}
scsi_ulto2b(0, mh->data_length); /* Reserved for MODE SELECT. */
if (device->pd_type != T_SEQUENTIAL)
mh->dev_spec = 0; /* See comment above */
mph = find_mode_page_10(mh);
}
if ((mph->page_code & SMPH_SPF) == 0) {
mphlen = sizeof(*mph);
mode_pars = (uint8_t *)(mph + 1);
len = mph->page_length;
} else {
mphsp = (struct scsi_mode_page_header_sp *)mph;
mphlen = sizeof(*mphsp);
mode_pars = (uint8_t *)(mphsp + 1);
len = scsi_2btoul(mphsp->page_length);
}
len = MIN(len, sizeof(data) - (mode_pars - data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Encode the value data to be passed back to the device. */
buff_encode_visit(mode_pars, len, format, editentry_save, 0);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
mph->page_code &= ~SMPH_PS; /* Reserved for MODE SELECT command. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/*
* Write the changes back to the device. If the user editted control
* page 3 (saved values) then request the changes be permanently
* recorded.
*/
mode_select(device, cdb_len, (pc << PAGE_CTRL_SHIFT == SMS_PAGE_CTRL_SAVED),
task_attr, retries, timeout, data, hlen + mphlen + len);
}
static void
editlist_save_desc(struct cam_device *device, int cdb_len, int llbaa, int pc,
int page, int subpage, int task_attr, int retries, int timeout)
{
uint8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
uint8_t *desc; /* Pointer to block descriptor. */
size_t len, hlen;
/* Make sure that something changed before continuing. */
if (! editlist_changed)
return;
/* Preload the CDB buffer with the current mode page data. */
mode_sense(device, &cdb_len, 0, llbaa, pc, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
/* Initial headers & offsets. */
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
hlen = sizeof(*mh);
desc = (uint8_t *)(mh + 1);
len = mh->blk_desc_len;
mh->data_length = 0; /* Reserved for MODE SELECT command. */
if (device->pd_type != T_SEQUENTIAL)
mh->dev_spec = 0; /* See comment above */
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
hlen = sizeof(*mh);
desc = (uint8_t *)(mh + 1);
len = scsi_2btoul(mh->blk_desc_len);
scsi_ulto2b(0, mh->data_length); /* Reserved for MODE SELECT. */
if (device->pd_type != T_SEQUENTIAL)
mh->dev_spec = 0; /* See comment above */
}
len = MIN(len, sizeof(data) - (desc - data));
/* Encode the value data to be passed back to the device. */
buff_encode_visit(desc, len, format, editentry_save, 0);
/*
* Write the changes back to the device. If the user editted control
* page 3 (saved values) then request the changes be permanently
* recorded.
*/
mode_select(device, cdb_len, (pc << PAGE_CTRL_SHIFT == SMS_PAGE_CTRL_SAVED),
task_attr, retries, timeout, data, hlen + len);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static int
modepage_write(FILE *file, int editonly)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct editentry *scan;
int written = 0;
STAILQ_FOREACH(scan, &editlist, link) {
if (scan->editable || !editonly) {
written++;
if (scan->type == 'c' || scan->type == 'z') {
fprintf(file, "%s: %s\n", scan->name,
scan->value.svalue);
} else {
fprintf(file, "%s: %u\n", scan->name,
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
scan->value.ivalue);
}
}
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return (written);
}
static int
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
modepage_read(FILE *file)
{
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
char *buffer; /* Pointer to dynamic line buffer. */
char *line; /* Pointer to static fgetln buffer. */
char *name; /* Name portion of the line buffer. */
char *value; /* Value portion of line buffer. */
size_t length; /* Length of static fgetln buffer. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#define ABORT_READ(message, param) do { \
warnx(message, param); \
free(buffer); \
returnerr(EAGAIN); \
} while (0)
while ((line = fgetln(file, &length)) != NULL) {
/* Trim trailing whitespace (including optional newline). */
while (length > 0 && isspace(line[length - 1]))
length--;
/* Allocate a buffer to hold the line + terminating null. */
if ((buffer = malloc(length + 1)) == NULL)
err(EX_OSERR, NULL);
memcpy(buffer, line, length);
buffer[length] = '\0';
/* Strip out comments. */
if ((value = strchr(buffer, '#')) != NULL)
*value = '\0';
/* The name is first in the buffer. Trim whitespace.*/
name = buffer;
RTRIM(name);
while (isspace(*name))
name++;
/* Skip empty lines. */
if (strlen(name) == 0)
continue;
/* The name ends at the colon; the value starts there. */
if ((value = strrchr(buffer, ':')) == NULL)
ABORT_READ("no value associated with %s", name);
*value = '\0'; /* Null-terminate name. */
value++; /* Value starts afterwards. */
/* Trim leading and trailing whitespace. */
RTRIM(value);
while (isspace(*value))
value++;
/* Make sure there is a value left. */
if (strlen(value) == 0)
ABORT_READ("no value associated with %s", name);
/* Update our in-memory copy of the modepage entry value. */
if (editentry_set(name, value, 1) != 0) {
if (errno == ENOENT) {
/* No entry by the name. */
ABORT_READ("no such modepage entry \"%s\"",
name);
} else if (errno == EINVAL) {
/* Invalid value. */
ABORT_READ("Invalid value for entry \"%s\"",
name);
} else if (errno == ERANGE) {
/* Value out of range for entry type. */
ABORT_READ("value out of range for %s", name);
} else if (errno == EPERM) {
/* Entry is not editable; not fatal. */
warnx("modepage entry \"%s\" is read-only; "
"skipping.", name);
}
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
free(buffer);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
return (ferror(file)? -1: 0);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
#undef ABORT_READ
}
static void
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
modepage_edit(void)
{
const char *editor;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
char *commandline;
int fd;
int written;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (!isatty(fileno(stdin))) {
/* Not a tty, read changes from stdin. */
modepage_read(stdin);
return;
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Lookup editor to invoke. */
if ((editor = getenv("EDITOR")) == NULL)
editor = DEFAULT_EDITOR;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Create temp file for editor to modify. */
if ((fd = mkstemp(edit_path)) == -1)
errx(EX_CANTCREAT, "mkstemp failed");
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
atexit(cleanup_editfile);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if ((edit_file = fdopen(fd, "w")) == NULL)
err(EX_NOINPUT, "%s", edit_path);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
written = modepage_write(edit_file, 1);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
fclose(edit_file);
edit_file = NULL;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (written == 0) {
warnx("no editable entries");
cleanup_editfile();
return;
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/*
* Allocate memory to hold the command line (the 2 extra characters
* are to hold the argument separator (a space), and the terminating
* null character.
*/
commandline = malloc(strlen(editor) + strlen(edit_path) + 2);
if (commandline == NULL)
err(EX_OSERR, NULL);
sprintf(commandline, "%s %s", editor, edit_path);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Invoke the editor on the temp file. */
if (system(commandline) == -1)
err(EX_UNAVAILABLE, "could not invoke %s", editor);
free(commandline);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if ((edit_file = fopen(edit_path, "r")) == NULL)
err(EX_NOINPUT, "%s", edit_path);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Read any changes made to the temp file. */
modepage_read(edit_file);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
cleanup_editfile();
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static void
modepage_dump(struct cam_device *device, int cdb_len, int dbd, int pc,
int page, int subpage, int task_attr, int retries, int timeout)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
{
u_int8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
u_int8_t *mode_pars; /* Pointer to modepage params. */
struct scsi_mode_page_header *mph;
struct scsi_mode_page_header_sp *mphsp;
size_t indx, len;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
mode_sense(device, &cdb_len, dbd, 0, pc, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
mph = find_mode_page_6(mh);
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
mph = find_mode_page_10(mh);
}
if ((mph->page_code & SMPH_SPF) == 0) {
mode_pars = (uint8_t *)(mph + 1);
len = mph->page_length;
} else {
mphsp = (struct scsi_mode_page_header_sp *)mph;
mode_pars = (uint8_t *)(mphsp + 1);
len = scsi_2btoul(mphsp->page_length);
}
len = MIN(len, sizeof(data) - (mode_pars - data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Print the raw mode page data with newlines each 8 bytes. */
for (indx = 0; indx < len; indx++) {
printf("%02x%c",mode_pars[indx],
(((indx + 1) % 8) == 0) ? '\n' : ' ');
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
putchar('\n');
}
static void
modepage_dump_desc(struct cam_device *device, int cdb_len, int llbaa, int pc,
int page, int subpage, int task_attr, int retries, int timeout)
{
uint8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
uint8_t *desc; /* Pointer to block descriptor. */
size_t indx, len;
mode_sense(device, &cdb_len, 0, llbaa, pc, page, subpage, task_attr,
retries, timeout, data, sizeof(data));
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
desc = (uint8_t *)(mh + 1);
len = mh->blk_desc_len;
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
desc = (uint8_t *)(mh + 1);
len = scsi_2btoul(mh->blk_desc_len);
}
len = MIN(len, sizeof(data) - (desc - data));
/* Print the raw mode page data with newlines each 8 bytes. */
for (indx = 0; indx < len; indx++) {
printf("%02x%c", desc[indx],
(((indx + 1) % 8) == 0) ? '\n' : ' ');
}
putchar('\n');
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
static void
cleanup_editfile(void)
{
if (edit_file == NULL)
return;
if (fclose(edit_file) != 0 || unlink(edit_path) != 0)
warn("%s", edit_path);
edit_file = NULL;
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
void
mode_edit(struct cam_device *device, int cdb_len, int desc, int dbd, int llbaa,
int pc, int page, int subpage, int edit, int binary, int task_attr,
int retry_count, int timeout)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
{
const char *pagedb_path; /* Path to modepage database. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (binary) {
if (edit)
errx(EX_USAGE, "cannot edit in binary mode.");
} else if (desc) {
editlist_populate_desc(device, cdb_len, llbaa, pc, page,
subpage, task_attr, retry_count, timeout);
} else {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if ((pagedb_path = getenv("SCSI_MODES")) == NULL)
pagedb_path = DEFAULT_SCSI_MODE_DB;
if (load_format(pagedb_path, page, subpage) != 0 &&
(edit || verbose)) {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (errno == ENOENT) {
/* Modepage database file not found. */
warn("cannot open modepage database \"%s\"",
pagedb_path);
} else if (errno == ESRCH) {
/* Modepage entry not found in database. */
warnx("modepage 0x%02x,0x%02x not found in "
"database \"%s\"", page, subpage,
pagedb_path);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
/* We can recover in display mode, otherwise we exit. */
if (!edit) {
warnx("reverting to binary display only");
binary = 1;
} else
exit(EX_OSFILE);
}
editlist_populate(device, cdb_len, dbd, pc, page, subpage,
task_attr, retry_count, timeout);
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if (edit) {
if (pc << PAGE_CTRL_SHIFT != SMS_PAGE_CTRL_CURRENT &&
pc << PAGE_CTRL_SHIFT != SMS_PAGE_CTRL_SAVED)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
errx(EX_USAGE, "it only makes sense to edit page 0 "
"(current) or page 3 (saved values)");
modepage_edit();
if (desc) {
editlist_save_desc(device, cdb_len, llbaa, pc, page,
subpage, task_attr, retry_count, timeout);
} else {
editlist_save(device, cdb_len, dbd, pc, page, subpage,
task_attr, retry_count, timeout);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
} else if (binary || STAILQ_EMPTY(&editlist)) {
/* Display without formatting information. */
if (desc) {
modepage_dump_desc(device, cdb_len, llbaa, pc, page,
subpage, task_attr, retry_count, timeout);
} else {
modepage_dump(device, cdb_len, dbd, pc, page, subpage,
task_attr, retry_count, timeout);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
} else {
/* Display with format. */
modepage_write(stdout, 0);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
void
mode_list(struct cam_device *device, int cdb_len, int dbd, int pc, int subpages,
Add task attribute support to camcontrol(8). Users can use the new generic argument, -Q task_attr, to specify a task attribute (simple, ordered, head of queue, aca) for the commands issued. The the default is simple, which works with all SCSI devices that support tagged queueing. This will mostly be useful for debugging target behavior in certain situations. You can try it out by compiling CTL with CTL_IO_DELAY turned on (in sys/cam/ctl/ctl_io.h) and then do something like this with one of the CTL LUNs: ctladm delay 0:0 -l done -t 10 camcontrol tur da34 -v And at then before the 10 second timer is up, in another terminal: camcontrol inquiry da34 -Q ordered -v The Inquiry should complete just after the TUR completes. Ordinarily it would complete first because of the delay injection, but because the task attribute is set to ordered in this case, CTL holds it up until the previous command has completed. sbin/camcontrol/camcontrol.c: Add the new generic argument, -Q, which allows the user to specify a SCSI task attribute. The user can specify task attributes by name or numerically. Add a new task_attr arguments to SCSI sub-functions. sbin/camcontrol/attrib.c, sbin/camcontrol/camcontrol.h, sbin/camcontrol/fwdownload.c, sbin/camcontrol/modeedit.c, sbin/camcontrol/persist.c, sbin/camcontrol/timestamp.c, sbin/camcontrol/zone.c: Add the new task_attr argument to SCSI sub-functions. sbin/camcontrol/camcontrol.8: Document the new -Q option, and add an example. Sponsored by: Spectra Logic MFC after: 1 week
2017-02-17 20:04:22 +00:00
int task_attr, int retry_count, int timeout)
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
{
u_int8_t data[MAX_DATA_SIZE]; /* Buffer to hold mode parameters. */
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct scsi_mode_page_header *mph;
struct scsi_mode_page_header_sp *mphsp;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
struct pagename *nameentry;
const char *pagedb_path;
int len, off, page, subpage;
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
if ((pagedb_path = getenv("SCSI_MODES")) == NULL)
pagedb_path = DEFAULT_SCSI_MODE_DB;
if (load_format(pagedb_path, 0, 0) != 0 && verbose && errno == ENOENT) {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Modepage database file not found. */
warn("cannot open modepage database \"%s\"", pagedb_path);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Build the list of all mode pages by querying the "all pages" page. */
mode_sense(device, &cdb_len, dbd, 0, pc, SMS_ALL_PAGES_PAGE,
subpages ? SMS_SUBPAGE_ALL : 0,
Add task attribute support to camcontrol(8). Users can use the new generic argument, -Q task_attr, to specify a task attribute (simple, ordered, head of queue, aca) for the commands issued. The the default is simple, which works with all SCSI devices that support tagged queueing. This will mostly be useful for debugging target behavior in certain situations. You can try it out by compiling CTL with CTL_IO_DELAY turned on (in sys/cam/ctl/ctl_io.h) and then do something like this with one of the CTL LUNs: ctladm delay 0:0 -l done -t 10 camcontrol tur da34 -v And at then before the 10 second timer is up, in another terminal: camcontrol inquiry da34 -Q ordered -v The Inquiry should complete just after the TUR completes. Ordinarily it would complete first because of the delay injection, but because the task attribute is set to ordered in this case, CTL holds it up until the previous command has completed. sbin/camcontrol/camcontrol.c: Add the new generic argument, -Q, which allows the user to specify a SCSI task attribute. The user can specify task attributes by name or numerically. Add a new task_attr arguments to SCSI sub-functions. sbin/camcontrol/attrib.c, sbin/camcontrol/camcontrol.h, sbin/camcontrol/fwdownload.c, sbin/camcontrol/modeedit.c, sbin/camcontrol/persist.c, sbin/camcontrol/timestamp.c, sbin/camcontrol/zone.c: Add the new task_attr argument to SCSI sub-functions. sbin/camcontrol/camcontrol.8: Document the new -Q option, and add an example. Sponsored by: Spectra Logic MFC after: 1 week
2017-02-17 20:04:22 +00:00
task_attr, retry_count, timeout, data, sizeof(data));
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Skip block descriptors. */
if (cdb_len == 6) {
struct scsi_mode_header_6 *mh =
(struct scsi_mode_header_6 *)data;
len = mh->data_length;
off = sizeof(*mh) + mh->blk_desc_len;
} else {
struct scsi_mode_header_10 *mh =
(struct scsi_mode_header_10 *)data;
len = scsi_2btoul(mh->data_length);
off = sizeof(*mh) + scsi_2btoul(mh->blk_desc_len);
}
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Iterate through the pages in the reply. */
while (off < len) {
This is an overhaul of the mode page handling in camcontrol as well as related patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes. Inspired by: dwhite Reviewed by: ken
2000-08-08 06:24:17 +00:00
/* Locate the next mode page header. */
mph = (struct scsi_mode_page_header *)(data + off);
if ((mph->page_code & SMPH_SPF) == 0) {
page = mph->page_code & SMS_PAGE_CODE;
subpage = 0;
off += sizeof(*mph) + mph->page_length;
} else {
mphsp = (struct scsi_mode_page_header_sp *)mph;
page = mphsp->page_code & SMS_PAGE_CODE;
subpage = mphsp->subpage;
off += sizeof(*mphsp) + scsi_2btoul(mphsp->page_length);
}
nameentry = nameentry_lookup(page, subpage);
if (subpage == 0) {
printf("0x%02x\t%s\n", page,
nameentry ? nameentry->name : "");
} else {
printf("0x%02x,0x%02x\t%s\n", page, subpage,
nameentry ? nameentry->name : "");
}
}
}