d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0e8fe3f0e9
freebsd-dev/sys/dev/ep/if_ep_eisa.c

267 lines
6.0 KiB
C
Raw Normal View History

3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
/*
* Product specific probe and attach routines for:
* 3COM 3C579 and 3C509(in eisa config mode) ethernet controllers
*
* Copyright (c) 1996 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Absolutely no warranty of function or purpose is made by the author
* Justin T. Gibbs.
* 4. Modifications may be freely made to this file if the above conditions
* are met.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
Removed nested include if <sys/socket.h> from <net/if.h> and <net/if_arp.h> and fixed the things that depended on it. The nested include just allowed unportable programs to compile and made my simple #include checking program report that networking code doesn't need to include <sys/socket.h>.
1996-10-12 19:49:43 +00:00
#include <sys/socket.h>
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
#include <sys/module.h>
#include <sys/bus.h>
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
#include <machine/bus.h>
#include <machine/resource.h>
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
#include <sys/rman.h>
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
#include <net/if.h>
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
#include <net/if_arp.h>
#include <net/if_media.h>
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
#include <machine/clock.h>
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Pre 4.0 tidy up. Collect together the components of several drivers and export eisa from the i386-only area (It's not, it's on some alphas too). The code hasn't been updated to work on the Alpha yet, but that can come later. Repository copies were done a while ago. Moving these now keeps them in consistant place across the 4.x series as the newbusification progresses. Submitted by: mdodd
2000-01-14 07:14:17 +00:00
#include <dev/eisa/eisaconf.h>
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Fix includes. I missed this the first time around.
1999-10-02 20:22:26 +00:00
#include <dev/ep/if_epreg.h>
#include <dev/ep/if_epvar.h>
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
#define EISA_DEVICE_ID_3COM_3C509_TP 0x506d5090
#define EISA_DEVICE_ID_3COM_3C509_BNC 0x506d5091
#define EISA_DEVICE_ID_3COM_3C579_TP 0x506d5092
#define EISA_DEVICE_ID_3COM_3C579_BNC 0x506d5093
#define EISA_DEVICE_ID_3COM_3C509_COMBO 0x506d5094
#define EISA_DEVICE_ID_3COM_3C509_TPO 0x506d5095
#define EP_EISA_SLOT_OFFSET 0x0c80
#define EP_EISA_IOSIZE 0x000a
#define EISA_IOCONF 0x0008
#define IRQ_CHANNEL 0xf000
#define INT_3 0x3000
#define INT_5 0x5000
#define INT_7 0x7000
#define INT_9 0x9000
#define INT_10 0xa000
#define INT_11 0xb000
#define INT_12 0xc000
#define INT_15 0xf000
#define EISA_BPROM_MEDIA_CONF 0x0006
#define TRANS_TYPE 0xc000
#define TRANS_TP 0x0000
#define TRANS_AUI 0x4000
#define TRANS_BNC 0xc000
Add shared EISA interrupt support. Clean up the match routines so that they return const char *
1997-09-21 21:35:24 +00:00
static const char *ep_match __P((eisa_id_t type));
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Add shared EISA interrupt support. Clean up the match routines so that they return const char *
1997-09-21 21:35:24 +00:00
static const char*
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
ep_match(eisa_id_t type)
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
{
switch(type) {
case EISA_DEVICE_ID_3COM_3C509_TP:
return "3Com 3C509-TP Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C509_BNC:
return "3Com 3C509-BNC Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C579_TP:
return "3Com 3C579-TP EISA Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C579_BNC:
return "3Com 3C579-BNC EISA Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C509_COMBO:
return "3Com 3C509-Combo Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C509_TPO:
return "3Com 3C509-TPO Network Adapter";
break;
default:
break;
}
return (NULL);
}
static int
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
ep_eisa_probe(device_t dev)
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
{
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
const char *desc;
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
u_long iobase;
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
u_short conf;
u_long port;
int irq;
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
int int_trig;
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
desc = ep_match(eisa_get_id(dev));
if (!desc)
return (ENXIO);
device_set_desc(dev, desc);
port = (eisa_get_slot(dev) * EISA_SLOT_SIZE);
iobase = port + EP_EISA_SLOT_OFFSET;
/* We must be in EISA configuration mode */
if ((inw(iobase + EP_W0_ADDRESS_CFG) & 0x1f) != 0x1f)
return ENXIO;
eisa_add_iospace(dev, iobase, EP_EISA_IOSIZE, RESVADDR_NONE);
eisa_add_iospace(dev, port, EP_IOSIZE, RESVADDR_NONE);
conf = inw(iobase + EISA_IOCONF);
/* Determine our IRQ */
switch (conf & IRQ_CHANNEL) {
case INT_3:
irq = 3;
break;
case INT_5:
irq = 5;
break;
case INT_7:
irq = 7;
break;
case INT_9:
irq = 9;
break;
case INT_10:
irq = 10;
break;
case INT_11:
irq = 11;
break;
case INT_12:
irq = 12;
break;
case INT_15:
irq = 15;
break;
default:
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
/* Disabled */
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
printf("ep: 3COM Network Adapter at "
"slot %d has its IRQ disabled. "
"Probe failed.\n",
eisa_get_slot(dev));
return ENXIO;
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
}
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
switch(eisa_get_id(dev)) {
case EISA_DEVICE_ID_3COM_3C579_BNC:
case EISA_DEVICE_ID_3COM_3C579_TP:
int_trig = EISA_TRIGGER_LEVEL;
break;
default:
int_trig = EISA_TRIGGER_EDGE;
break;
}
eisa_add_intr(dev, irq, int_trig);
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
return 0;
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
}
static int
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
ep_eisa_attach(device_t dev)
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
{
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
struct ep_softc * sc = device_get_softc(dev);
struct resource * eisa_io = NULL;
u_int32_t eisa_iobase;
int irq;
int error = 0;
int rid;
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
rid = 1;
eisa_io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (!eisa_io) {
device_printf(dev, "No I/O space?!\n");
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
error = ENXIO;
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
goto bad;
}
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
eisa_iobase = rman_get_start(eisa_io);
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
/* Reset and Enable the card */
outb(eisa_iobase + EP_W0_CONFIG_CTRL, W0_P4_CMD_RESET_ADAPTER);
DELAY(1000); /* we must wait at least 1 ms */
outb(eisa_iobase + EP_W0_CONFIG_CTRL, W0_P4_CMD_ENABLE_ADAPTER);
/* Now the registers are availible through the lower ioport */
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
if ((error = ep_alloc(dev))) {
device_printf(dev, "ep_alloc() failed! (%d)\n", error);
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
goto bad;
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
}
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
switch(eisa_get_id(dev)) {
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
case EISA_DEVICE_ID_3COM_3C579_BNC:
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
case EISA_DEVICE_ID_3COM_3C579_TP:
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
sc->stat = F_ACCESS_32_BITS;
break;
default:
break;
}
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
ep_get_media(sc);
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
irq = rman_get_start(sc->irq);
if (irq == 9)
irq = 2;
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
GO_WINDOW(0);
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
SET_IRQ(BASE, irq);
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
if ((error = ep_attach(sc))) {
device_printf(dev, "ep_attach() failed! (%d)\n", error);
goto bad;
}
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
if ((error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, ep_intr,
sc, &sc->ep_intrhand))) {
device_printf(dev, "bus_setup_intr() failed! (%d)\n", error);
goto bad;
}
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
return (0);
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
bad:
if (eisa_io)
bus_release_resource(dev, SYS_RES_IOPORT, 0, eisa_io);
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
ep_free(dev);
return (error);
3c5x9.c: The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa configuration mode. aha1742.c aic7770.c bt74x.c: Only call eisa_registerdev after the probe is successfully. eisaconf.c: Increase kdc->kdc_datalen during the eisa_reg* functions instead of in the eisa_add* functions since eisa_registerdev has already been called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
}
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
static device_method_t ep_eisa_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ep_eisa_probe),
DEVMETHOD(device_attach, ep_eisa_attach),
{ 0, 0 }
};
static driver_t ep_eisa_driver = {
"ep",
ep_eisa_methods,
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
sizeof(struct ep_softc),
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
};
Add newbus attachment for pccard driver. Heavily tested by me, and I'm committing this from a laptop running this driver. Have only one devclass for all ep devices (at least for pccard and eisa) so unit numbering is sane. Might not work with both isa and non-isa devices on the same system until ep is updated (Matt has some patches in the pipeline which should resolve this, he wanted me to commit this so he can resolve any conflicts against cvs rather than my patches). Reviewed by: Matt Dodd <mdodd@freebsd.org>
1999-10-25 02:52:16 +00:00
extern devclass_t ep_devclass;
Implement an EISA new-bus framework. The old driver probe mechanism had a quirk that made a shim rather hard to implement properly and it was just easier to convert the drivers in one go. The changes to the buslogic driver go beyond just this - the whole driver was new-bus'ed including pci and isa. I have only tested the EISA part of this so far. Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
DRIVER_MODULE(ep, eisa, ep_eisa_driver, ep_devclass, 0, 0);
Reference in New Issue Copy Permalink