freebsd-dev/lib/libusb/libusb01.c

1023 lines
21 KiB
C
Raw Normal View History

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This file contains the emulation layer for LibUSB v0.1 from sourceforge.
*/
#ifdef LIBUSB_GLOBAL_INCLUDE_FILE
#include LIBUSB_GLOBAL_INCLUDE_FILE
#else
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <sys/queue.h>
#endif
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
#include "libusb20.h"
#include "libusb20_desc.h"
#include "libusb20_int.h"
#include "usb.h"
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/*
* The two following macros were taken from the original LibUSB v0.1
* for sake of compatibility:
*/
#define LIST_ADD(begin, ent) \
do { \
if (begin) { \
ent->next = begin; \
ent->next->prev = ent; \
} else { \
ent->next = NULL; \
} \
ent->prev = NULL; \
begin = ent; \
} while(0)
#define LIST_DEL(begin, ent) \
do { \
if (ent->prev) { \
ent->prev->next = ent->next; \
} else { \
begin = ent->next; \
} \
if (ent->next) { \
ent->next->prev = ent->prev; \
} \
ent->prev = NULL; \
ent->next = NULL; \
} while (0)
struct usb_bus *usb_busses = NULL;
static struct usb_bus usb_global_bus = {
.dirname = {"/dev/usb"},
.root_dev = NULL,
.devices = NULL,
};
static struct libusb20_backend *usb_backend = NULL;
struct usb_parse_state {
struct {
struct libusb20_endpoint *currep;
struct libusb20_interface *currifc;
struct libusb20_config *currcfg;
struct libusb20_me_struct *currextra;
} a;
struct {
struct usb_config_descriptor *currcfg;
struct usb_interface_descriptor *currifc;
struct usb_endpoint_descriptor *currep;
struct usb_interface *currifcw;
uint8_t *currextra;
} b;
uint8_t preparse;
};
static struct libusb20_transfer *
usb_get_transfer_by_ep_no(usb_dev_handle * dev, uint8_t ep_no)
{
struct libusb20_device *pdev = (void *)dev;
struct libusb20_transfer *xfer;
int err;
uint32_t bufsize;
uint8_t x;
uint8_t speed;
x = (ep_no & LIBUSB20_ENDPOINT_ADDRESS_MASK) * 2;
if (ep_no & LIBUSB20_ENDPOINT_DIR_MASK) {
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
/* this is an IN endpoint */
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
x |= 1;
}
speed = libusb20_dev_get_speed(pdev);
/* select a sensible buffer size */
if (speed == LIBUSB20_SPEED_LOW) {
bufsize = 256;
} else if (speed == LIBUSB20_SPEED_FULL) {
bufsize = 4096;
} else if (speed == LIBUSB20_SPEED_SUPER) {
bufsize = 65536;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
} else {
bufsize = 16384;
}
xfer = libusb20_tr_get_pointer(pdev, x);
if (xfer == NULL)
return (xfer);
err = libusb20_tr_open(xfer, bufsize, 1, ep_no);
if (err == LIBUSB20_ERROR_BUSY) {
/* already opened */
return (xfer);
} else if (err) {
return (NULL);
}
/* success */
return (xfer);
}
usb_dev_handle *
usb_open(struct usb_device *dev)
{
int err;
err = libusb20_dev_open(dev->dev, 16 * 2);
if (err == LIBUSB20_ERROR_BUSY) {
/*
* Workaround buggy USB applications which open the USB
* device multiple times:
*/
return (dev->dev);
}
if (err)
return (NULL);
/*
* Dequeue USB device from backend queue so that it does not get
* freed when the backend is re-scanned:
*/
libusb20_be_dequeue_device(usb_backend, dev->dev);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
return (dev->dev);
}
int
usb_close(usb_dev_handle * udev)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
struct usb_device *dev;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
int err;
err = libusb20_dev_close((void *)udev);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
if (err)
return (-1);
if (usb_backend != NULL) {
/*
* Enqueue USB device to backend queue so that it gets freed
* when the backend is re-scanned:
*/
libusb20_be_enqueue_device(usb_backend, (void *)udev);
} else {
/*
* The backend is gone. Free device data so that we
* don't start leaking memory!
*/
dev = usb_device(udev);
libusb20_dev_free((void *)udev);
LIST_DEL(usb_global_bus.devices, dev);
free(dev);
}
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
return (0);
}
int
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
usb_get_string(usb_dev_handle * dev, int strindex,
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
int langid, char *buf, size_t buflen)
{
int err;
if (dev == NULL)
return (-1);
if (buflen > 65535)
buflen = 65535;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
err = libusb20_dev_req_string_sync((void *)dev,
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
strindex, langid, buf, buflen);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
if (err)
return (-1);
return (0);
}
int
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
usb_get_string_simple(usb_dev_handle * dev, int strindex,
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
char *buf, size_t buflen)
{
int err;
if (dev == NULL)
return (-1);
if (buflen > 65535)
buflen = 65535;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
err = libusb20_dev_req_string_simple_sync((void *)dev,
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
strindex, buf, buflen);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
if (err)
return (-1);
return (strlen(buf));
}
int
usb_get_descriptor_by_endpoint(usb_dev_handle * udev, int ep, uint8_t type,
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
uint8_t ep_index, void *buf, int size)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
memset(buf, 0, size);
if (udev == NULL)
return (-1);
if (size > 65535)
size = 65535;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
return (usb_control_msg(udev, ep | USB_ENDPOINT_IN,
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
USB_REQ_GET_DESCRIPTOR, (type << 8) + ep_index, 0,
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
buf, size, 1000));
}
int
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
usb_get_descriptor(usb_dev_handle * udev, uint8_t type, uint8_t desc_index,
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
void *buf, int size)
{
memset(buf, 0, size);
if (udev == NULL)
return (-1);
if (size > 65535)
size = 65535;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
return (usb_control_msg(udev, USB_ENDPOINT_IN, USB_REQ_GET_DESCRIPTOR,
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
(type << 8) + desc_index, 0, buf, size, 1000));
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_parse_descriptor(uint8_t *source, char *description, void *dest)
{
uint8_t *sp = source;
uint8_t *dp = dest;
uint16_t w;
uint32_t d;
char *cp;
for (cp = description; *cp; cp++) {
switch (*cp) {
case 'b': /* 8-bit byte */
*dp++ = *sp++;
break;
/*
* 16-bit word, convert from little endian to CPU
*/
case 'w':
w = (sp[1] << 8) | sp[0];
sp += 2;
/* Align to word boundary */
dp += ((dp - (uint8_t *)0) & 1);
*((uint16_t *)dp) = w;
dp += 2;
break;
/*
* 32-bit dword, convert from little endian to CPU
*/
case 'd':
d = (sp[3] << 24) | (sp[2] << 16) |
(sp[1] << 8) | sp[0];
sp += 4;
/* Align to word boundary */
dp += ((dp - (uint8_t *)0) & 1);
/* Align to double word boundary */
dp += ((dp - (uint8_t *)0) & 2);
*((uint32_t *)dp) = d;
dp += 4;
break;
}
}
return (sp - source);
}
static void
usb_parse_extra(struct usb_parse_state *ps, uint8_t **pptr, int *plen)
{
void *ptr;
uint16_t len;
ptr = ps->a.currextra->ptr;
len = ps->a.currextra->len;
if (ps->preparse == 0) {
memcpy(ps->b.currextra, ptr, len);
*pptr = ps->b.currextra;
*plen = len;
}
ps->b.currextra += len;
return;
}
static void
usb_parse_endpoint(struct usb_parse_state *ps)
{
struct usb_endpoint_descriptor *bep;
struct libusb20_endpoint *aep;
aep = ps->a.currep;
bep = ps->b.currep++;
if (ps->preparse == 0) {
/* copy descriptor fields */
bep->bLength = aep->desc.bLength;
bep->bDescriptorType = aep->desc.bDescriptorType;
bep->bEndpointAddress = aep->desc.bEndpointAddress;
bep->bmAttributes = aep->desc.bmAttributes;
bep->wMaxPacketSize = aep->desc.wMaxPacketSize;
bep->bInterval = aep->desc.bInterval;
bep->bRefresh = aep->desc.bRefresh;
bep->bSynchAddress = aep->desc.bSynchAddress;
}
ps->a.currextra = &aep->extra;
usb_parse_extra(ps, &bep->extra, &bep->extralen);
return;
}
static void
usb_parse_iface_sub(struct usb_parse_state *ps)
{
struct libusb20_interface *aifc;
struct usb_interface_descriptor *bifc;
uint8_t x;
aifc = ps->a.currifc;
bifc = ps->b.currifc++;
if (ps->preparse == 0) {
/* copy descriptor fields */
bifc->bLength = aifc->desc.bLength;
bifc->bDescriptorType = aifc->desc.bDescriptorType;
bifc->bInterfaceNumber = aifc->desc.bInterfaceNumber;
bifc->bAlternateSetting = aifc->desc.bAlternateSetting;
bifc->bNumEndpoints = aifc->num_endpoints;
bifc->bInterfaceClass = aifc->desc.bInterfaceClass;
bifc->bInterfaceSubClass = aifc->desc.bInterfaceSubClass;
bifc->bInterfaceProtocol = aifc->desc.bInterfaceProtocol;
bifc->iInterface = aifc->desc.iInterface;
bifc->endpoint = ps->b.currep;
}
for (x = 0; x != aifc->num_endpoints; x++) {
ps->a.currep = aifc->endpoints + x;
usb_parse_endpoint(ps);
}
ps->a.currextra = &aifc->extra;
usb_parse_extra(ps, &bifc->extra, &bifc->extralen);
return;
}
static void
usb_parse_iface(struct usb_parse_state *ps)
{
struct libusb20_interface *aifc;
struct usb_interface *bifc;
uint8_t x;
aifc = ps->a.currifc;
bifc = ps->b.currifcw++;
if (ps->preparse == 0) {
/* initialise interface wrapper */
bifc->altsetting = ps->b.currifc;
bifc->num_altsetting = aifc->num_altsetting + 1;
}
usb_parse_iface_sub(ps);
for (x = 0; x != aifc->num_altsetting; x++) {
ps->a.currifc = aifc->altsetting + x;
usb_parse_iface_sub(ps);
}
return;
}
static void
usb_parse_config(struct usb_parse_state *ps)
{
struct libusb20_config *acfg;
struct usb_config_descriptor *bcfg;
uint8_t x;
acfg = ps->a.currcfg;
bcfg = ps->b.currcfg;
if (ps->preparse == 0) {
/* initialise config wrapper */
bcfg->bLength = acfg->desc.bLength;
bcfg->bDescriptorType = acfg->desc.bDescriptorType;
bcfg->wTotalLength = acfg->desc.wTotalLength;
bcfg->bNumInterfaces = acfg->num_interface;
bcfg->bConfigurationValue = acfg->desc.bConfigurationValue;
bcfg->iConfiguration = acfg->desc.iConfiguration;
bcfg->bmAttributes = acfg->desc.bmAttributes;
bcfg->MaxPower = acfg->desc.bMaxPower;
bcfg->interface = ps->b.currifcw;
}
for (x = 0; x != acfg->num_interface; x++) {
ps->a.currifc = acfg->interface + x;
usb_parse_iface(ps);
}
ps->a.currextra = &acfg->extra;
usb_parse_extra(ps, &bcfg->extra, &bcfg->extralen);
return;
}
int
usb_parse_configuration(struct usb_config_descriptor *config,
uint8_t *buffer)
{
struct usb_parse_state ps;
uint8_t *ptr;
uint32_t a;
uint32_t b;
uint32_t c;
uint32_t d;
if ((buffer == NULL) || (config == NULL)) {
return (-1);
}
memset(&ps, 0, sizeof(ps));
ps.a.currcfg = libusb20_parse_config_desc(buffer);
ps.b.currcfg = config;
if (ps.a.currcfg == NULL) {
/* could not parse config or out of memory */
return (-1);
}
/* do the pre-parse */
ps.preparse = 1;
usb_parse_config(&ps);
a = ((uint8_t *)(ps.b.currifcw) - ((uint8_t *)0));
b = ((uint8_t *)(ps.b.currifc) - ((uint8_t *)0));
c = ((uint8_t *)(ps.b.currep) - ((uint8_t *)0));
d = ((uint8_t *)(ps.b.currextra) - ((uint8_t *)0));
/* allocate memory for our configuration */
ptr = malloc(a + b + c + d);
if (ptr == NULL) {
/* free config structure */
free(ps.a.currcfg);
return (-1);
}
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* "currifcw" must be first, hence this pointer is freed */
ps.b.currifcw = (void *)(ptr);
ps.b.currifc = (void *)(ptr + a);
ps.b.currep = (void *)(ptr + a + b);
ps.b.currextra = (void *)(ptr + a + b + c);
/* generate a libusb v0.1 compatible structure */
ps.preparse = 0;
usb_parse_config(&ps);
/* free config structure */
free(ps.a.currcfg);
return (0); /* success */
}
void
usb_destroy_configuration(struct usb_device *dev)
{
uint8_t c;
if (dev->config == NULL) {
return;
}
for (c = 0; c != dev->descriptor.bNumConfigurations; c++) {
struct usb_config_descriptor *cf = &dev->config[c];
if (cf->interface != NULL) {
free(cf->interface);
cf->interface = NULL;
}
}
free(dev->config);
dev->config = NULL;
return;
}
void
usb_fetch_and_parse_descriptors(usb_dev_handle * udev)
{
struct usb_device *dev;
struct libusb20_device *pdev;
uint8_t *ptr;
int error;
uint32_t size;
uint16_t len;
uint8_t x;
if (udev == NULL) {
/* be NULL safe */
return;
}
dev = usb_device(udev);
pdev = (void *)udev;
if (dev->descriptor.bNumConfigurations == 0) {
/* invalid device */
return;
}
size = dev->descriptor.bNumConfigurations *
sizeof(struct usb_config_descriptor);
dev->config = malloc(size);
if (dev->config == NULL) {
/* out of memory */
return;
}
memset(dev->config, 0, size);
for (x = 0; x != dev->descriptor.bNumConfigurations; x++) {
error = (pdev->methods->get_config_desc_full) (
pdev, &ptr, &len, x);
if (error) {
usb_destroy_configuration(dev);
return;
}
usb_parse_configuration(dev->config + x, ptr);
/* free config buffer */
free(ptr);
}
return;
}
static int
usb_std_io(usb_dev_handle * dev, int ep, char *bytes, int size,
int timeout, int is_intr)
{
struct libusb20_transfer *xfer;
uint32_t temp;
uint32_t maxsize;
uint32_t actlen;
char *oldbytes;
xfer = usb_get_transfer_by_ep_no(dev, ep);
if (xfer == NULL)
return (-1);
if (libusb20_tr_pending(xfer)) {
/* there is already a transfer ongoing */
return (-1);
}
maxsize = libusb20_tr_get_max_total_length(xfer);
oldbytes = bytes;
/*
* We allow transferring zero bytes which is the same
* equivalent to a zero length USB packet.
*/
do {
temp = size;
if (temp > maxsize) {
/* find maximum possible length */
temp = maxsize;
}
if (is_intr)
libusb20_tr_setup_intr(xfer, bytes, temp, timeout);
else
libusb20_tr_setup_bulk(xfer, bytes, temp, timeout);
libusb20_tr_start(xfer);
while (1) {
if (libusb20_dev_process((void *)dev) != 0) {
/* device detached */
return (-1);
}
if (libusb20_tr_pending(xfer) == 0) {
/* transfer complete */
break;
}
/* wait for USB event from kernel */
libusb20_dev_wait_process((void *)dev, -1);
}
switch (libusb20_tr_get_status(xfer)) {
case 0:
/* success */
break;
case LIBUSB20_TRANSFER_TIMED_OUT:
/* transfer timeout */
return (-ETIMEDOUT);
default:
/* other transfer error */
return (-ENXIO);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
actlen = libusb20_tr_get_actual_length(xfer);
bytes += actlen;
size -= actlen;
if (actlen != temp) {
/* short transfer */
break;
}
} while (size > 0);
return (bytes - oldbytes);
}
int
usb_bulk_write(usb_dev_handle * dev, int ep, char *bytes,
int size, int timeout)
{
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
return (usb_std_io(dev, ep & ~USB_ENDPOINT_DIR_MASK,
bytes, size, timeout, 0));
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_bulk_read(usb_dev_handle * dev, int ep, char *bytes,
int size, int timeout)
{
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
return (usb_std_io(dev, ep | USB_ENDPOINT_DIR_MASK,
bytes, size, timeout, 0));
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_interrupt_write(usb_dev_handle * dev, int ep, char *bytes,
int size, int timeout)
{
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
return (usb_std_io(dev, ep & ~USB_ENDPOINT_DIR_MASK,
bytes, size, timeout, 1));
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_interrupt_read(usb_dev_handle * dev, int ep, char *bytes,
int size, int timeout)
{
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
return (usb_std_io(dev, ep | USB_ENDPOINT_DIR_MASK,
bytes, size, timeout, 1));
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_control_msg(usb_dev_handle * dev, int requesttype, int request,
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
int value, int wIndex, char *bytes, int size, int timeout)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
struct LIBUSB20_CONTROL_SETUP_DECODED req;
int err;
uint16_t actlen;
LIBUSB20_INIT(LIBUSB20_CONTROL_SETUP, &req);
req.bmRequestType = requesttype;
req.bRequest = request;
req.wValue = value;
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
req.wIndex = wIndex;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
req.wLength = size;
err = libusb20_dev_request_sync((void *)dev, &req, bytes,
&actlen, timeout, 0);
if (err)
return (-1);
return (actlen);
}
int
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
usb_set_configuration(usb_dev_handle * udev, int bConfigurationValue)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
struct usb_device *dev;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
int err;
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
uint8_t i;
/*
* Need to translate from "bConfigurationValue" to
* configuration index:
*/
if (bConfigurationValue == 0) {
/* unconfigure */
i = 255;
} else {
/* lookup configuration index */
dev = usb_device(udev);
/* check if the configuration array is not there */
if (dev->config == NULL) {
return (-1);
}
for (i = 0;; i++) {
if (i == dev->descriptor.bNumConfigurations) {
/* "bConfigurationValue" not found */
return (-1);
}
if ((dev->config + i)->bConfigurationValue ==
bConfigurationValue) {
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
break;
}
}
}
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
err = libusb20_dev_set_config_index((void *)udev, i);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
if (err)
return (-1);
return (0);
}
int
usb_claim_interface(usb_dev_handle * dev, int interface)
{
struct libusb20_device *pdev = (void *)dev;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
pdev->claimed_interface = interface;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
return (0);
}
int
usb_release_interface(usb_dev_handle * dev, int interface)
{
/* do nothing */
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
return (0);
}
int
usb_set_altinterface(usb_dev_handle * dev, int alternate)
{
struct libusb20_device *pdev = (void *)dev;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
int err;
uint8_t iface;
iface = pdev->claimed_interface;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
err = libusb20_dev_set_alt_index((void *)dev, iface, alternate);
if (err)
return (-1);
return (0);
}
int
usb_resetep(usb_dev_handle * dev, unsigned int ep)
{
/* emulate an endpoint reset through clear-STALL */
return (usb_clear_halt(dev, ep));
}
int
usb_clear_halt(usb_dev_handle * dev, unsigned int ep)
{
struct libusb20_transfer *xfer;
xfer = usb_get_transfer_by_ep_no(dev, ep);
if (xfer == NULL)
return (-1);
libusb20_tr_clear_stall_sync(xfer);
return (0);
}
int
usb_reset(usb_dev_handle * dev)
{
int err;
err = libusb20_dev_reset((void *)dev);
if (err)
return (-1);
/*
* Be compatible with LibUSB from sourceforge and close the
* handle after reset!
*/
return (usb_close(dev));
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_check_connected(usb_dev_handle * dev)
{
int err;
err = libusb20_dev_check_connected((void *)dev);
if (err)
return (-1);
return (0);
}
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
const char *
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
usb_strerror(void)
{
/* TODO */
return ("Unknown error");
}
void
usb_init(void)
{
/* nothing to do */
return;
}
void
usb_set_debug(int level)
{
/* use kernel UGEN debugging if you need to see what is going on */
return;
}
int
usb_find_busses(void)
{
usb_busses = &usb_global_bus;
return (1);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
int
usb_find_devices(void)
{
struct libusb20_device *pdev;
struct usb_device *udev;
struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
int devnum;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
int err;
/* cleanup after last device search */
/* close all opened devices, if any */
while ((pdev = libusb20_be_device_foreach(usb_backend, NULL))) {
udev = pdev->privLuData;
libusb20_be_dequeue_device(usb_backend, pdev);
libusb20_dev_free(pdev);
if (udev != NULL) {
LIST_DEL(usb_global_bus.devices, udev);
free(udev);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
}
/* free old USB backend, if any */
libusb20_be_free(usb_backend);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* do a new backend device search */
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
usb_backend = libusb20_be_alloc_default();
if (usb_backend == NULL) {
return (-1);
}
/* iterate all devices */
devnum = 1;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
pdev = NULL;
while ((pdev = libusb20_be_device_foreach(usb_backend, pdev))) {
udev = malloc(sizeof(*udev));
if (udev == NULL)
break;
memset(udev, 0, sizeof(*udev));
udev->bus = &usb_global_bus;
snprintf(udev->filename, sizeof(udev->filename),
"/dev/ugen%u.%u",
libusb20_dev_get_bus_number(pdev),
libusb20_dev_get_address(pdev));
ddesc = libusb20_dev_get_device_desc(pdev);
udev->descriptor.bLength = sizeof(udev->descriptor);
udev->descriptor.bDescriptorType = ddesc->bDescriptorType;
udev->descriptor.bcdUSB = ddesc->bcdUSB;
udev->descriptor.bDeviceClass = ddesc->bDeviceClass;
udev->descriptor.bDeviceSubClass = ddesc->bDeviceSubClass;
udev->descriptor.bDeviceProtocol = ddesc->bDeviceProtocol;
udev->descriptor.bMaxPacketSize0 = ddesc->bMaxPacketSize0;
udev->descriptor.idVendor = ddesc->idVendor;
udev->descriptor.idProduct = ddesc->idProduct;
udev->descriptor.bcdDevice = ddesc->bcdDevice;
udev->descriptor.iManufacturer = ddesc->iManufacturer;
udev->descriptor.iProduct = ddesc->iProduct;
udev->descriptor.iSerialNumber = ddesc->iSerialNumber;
udev->descriptor.bNumConfigurations =
ddesc->bNumConfigurations;
if (udev->descriptor.bNumConfigurations > USB_MAXCONFIG) {
/* truncate number of configurations */
udev->descriptor.bNumConfigurations = USB_MAXCONFIG;
}
udev->devnum = devnum++;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* link together the two structures */
udev->dev = pdev;
pdev->privLuData = udev;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
err = libusb20_dev_open(pdev, 0);
if (err == 0) {
/* XXX get all config descriptors by default */
usb_fetch_and_parse_descriptors((void *)pdev);
libusb20_dev_close(pdev);
}
LIST_ADD(usb_global_bus.devices, udev);
}
return (devnum - 1); /* success */
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
struct usb_device *
usb_device(usb_dev_handle * dev)
{
struct libusb20_device *pdev;
pdev = (void *)dev;
return (pdev->privLuData);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
struct usb_bus *
usb_get_busses(void)
{
return (usb_busses);
}
int
usb_get_driver_np(usb_dev_handle * dev, int interface, char *name, int namelen)
{
struct libusb20_device *pdev;
char *ptr;
int err;
pdev = (void *)dev;
if (pdev == NULL)
return (-1);
if (namelen < 1)
return (-1);
if (namelen > 255)
namelen = 255;
err = libusb20_dev_get_iface_desc(pdev, interface, name, namelen);
if (err != 0)
return (-1);
/* we only want the driver name */
ptr = strstr(name, ":");
if (ptr != NULL)
*ptr = 0;
return (0);
}
int
usb_detach_kernel_driver_np(usb_dev_handle * dev, int interface)
{
struct libusb20_device *pdev;
int err;
pdev = (void *)dev;
if (pdev == NULL)
return (-1);
err = libusb20_dev_detach_kernel_driver(pdev, interface);
if (err != 0)
return (-1);
return (0);
}