freebsd-dev/lib/Makefile

330 lines
5.9 KiB
Makefile
Raw Normal View History

1994-05-27 05:00:24 +00:00
# @(#)Makefile 8.1 (Berkeley) 6/4/93
1999-08-28 00:22:10 +00:00
# $FreeBSD$
.include <src.opts.mk>
# The SUBDIR_ORDERED list is a small set of libraries which are used by many
# of the other libraries. These are built first with a .WAIT between them
# and the main list to avoid needing a SUBDIR_DEPEND line on every library
# naming just these few items.
SUBDIR_ORDERED= csu \
.WAIT \
libc \
libc_nonshared \
libcompiler_rt \
${_libclang_rt} \
${_libcplusplus} \
${_libcxxrt} \
libelf \
msun
# The main list; please keep these sorted alphabetically.
SUBDIR= ${SUBDIR_ORDERED} \
.WAIT \
libalias \
libarchive \
${_libatm} \
libauditd \
libbegemot \
libblocksruntime \
${_libbluetooth} \
${_libbsnmp} \
2014-03-06 04:06:36 +00:00
libbsdstat \
libbsm \
libbz2 \
libcalendar \
libcam \
${_libcapsicum} \
${_libcasper} \
${_libcom_err} \
libcompat \
libcrypt \
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
libdevctl \
libdevinfo \
libdevstat \
libdpv \
libdwarf \
libedit \
${_libelftc} \
${_libevent} \
libexecinfo \
libexpat \
libfetch \
libfigpar \
libgeom \
${_libgpio} \
${_libgssapi} \
${_librpcsec_gss} \
${_libiconv_modules} \
libipsec \
libjail \
libkiconv \
libkvm \
${_libldns} \
liblzma \
${_libmagic} \
libmemstat \
libmd \
${_libmilter} \
${_libmp} \
Significant upgrades to sa(4) and mt(1). The primary focus of these changes is to modernize FreeBSD's tape infrastructure so that we can take advantage of some of the features of modern tape drives and allow support for LTFS. Significant changes and new features include: o sa(4) driver status and parameter information is now exported via an XML structure. This will allow for changes and improvements later on that will not break userland applications. The old MTIOCGET status ioctl remains, so applications using the existing interface will not break. o 'mt status' now reports drive-reported tape position information as well as the previously available calculated tape position information. These numbers will be different at times, because the drive-reported block numbers are relative to BOP (Beginning of Partition), but the block numbers calculated previously via sa(4) (and still provided) are relative to the last filemark. Both numbers are now provided. 'mt status' now also shows the drive INQUIRY information, serial number and any position flags (BOP, EOT, etc.) provided with the tape position information. 'mt status -v' adds information on the maximum possible I/O size, and the underlying values used to calculate it. o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed. The extra devices were originally added as place holders for density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap and Solaris) have had device nodes that, when you write to them, will automatically select a given density for particular tape drives. This is a convenient way of switching densities, but it was never implemented in FreeBSD. Only the device nodes were there, and that sometimes confused users. For modern tape devices, the density is generally not selectable (e.g. with LTO) or defaults to the highest availble density when the tape is rewritten from BOT (e.g. TS11X0). So, for most users, density selection won't be necessary. If they do need to select the density, it is easy enough to use 'mt density' to change it. o Protection information is now supported. This is either a Reed-Solomon CRC or CRC32 that is included at the end of each block read and written. On write, the tape drive verifies the CRC, and on read, the tape drive provides a CRC for the userland application to verify. o New, extensible tape driver parameter get/set interface. o Density reporting information. For drives that support it, 'mt getdensity' will show detailed information on what formats the tape drive supports, and what formats the tape drive supports. o Some mt(1) functionality moved into a new mt(3) library so that external applications can reuse the code. o The new mt(3) library includes helper routines to aid in parsing the XML output of the sa(4) driver, and build a tree of driver metadata. o Support for the MTLOAD (load a tape in the drive) and MTWEOFI (write filemark immediate) ioctls needed by IBM's LTFS implementation. o Improve device departure behavior for the sa(4) driver. The previous implementation led to hangs when the device was open. o This has been tested on the following types of drives: IBM TS1150 IBM TS1140 IBM LTO-6 IBM LTO-5 HP LTO-2 Seagate DDS-4 Quantum DLT-4000 Exabyte 8505 Sony DDS-2 contrib/groff/tmac/doc-syms, share/mk/bsd.libnames.mk, lib/Makefile, Add libmt. lib/libmt/Makefile, lib/libmt/mt.3, lib/libmt/mtlib.c, lib/libmt/mtlib.h, New mt(3) library that contains functions moved from mt(1) and new functions needed to interact with the updated sa(4) driver. This includes XML parser helper functions that application writers can use when writing code to query tape parameters. rescue/rescue/Makefile: Add -lmt to CRUNCH_LIBS. src/share/man/man4/mtio.4 Clarify this man page a bit, and since it contains what is essentially the mtio.h header file, add new ioctls and structure definitions from mtio.h. src/share/man/man4/sa.4 Update BUGS and maintainer section. sys/cam/scsi/scsi_all.c, sys/cam/scsi/scsi_all.h: Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building functions. sys/cam/scsi/scsi_sa.c sys/cam/scsi/scsi_sa.h Many tape driver changes, largely outlined above. Increase the sa(4) driver read/write timeout from 4 to 32 minutes. This is based on the recommended values for IBM LTO 5/6 drives. This may also avoid timeouts for other tape hardware that can take a long time to do retries and error recovery. Longer term, a better way to handle this is to ask the drive for recommended timeout values using the REPORT SUPPORTED OPCODES command. Modern IBM and Oracle tape drives at least support that command, and it would allow for more accurate timeout values. Add XML status generation. This is done with a series of macros to eliminate as much duplicate code as possible. The new XML-based status values are reported through the new MTIOCEXTGET ioctl. Add XML driver parameter reporting, using the new MTIOCPARAMGET ioctl. Add a new driver parameter setting interface, using the new MTIOCPARAMSET and MTIOCSETLIST ioctls. Add a new MTIOCRBLIM ioctl to get block limits information. Add CCB/CDB building routines scsi_locate_16, scsi_locate_10, and scsi_read_position_10(). scsi_locate_10 implements the LOCATE command, as does the existing scsi_set_position() command. It just supports additional arguments and features. If/when we figure out a good way to provide backward compatibility for older applications using the old function API, we can just revamp scsi_set_position(). The same goes for scsi_read_position_10() and the existing scsi_read_position() function. Revamp sasetpos() to take the new mtlocate structure as an argument. It now will use either scsi_locate_10() or scsi_locate_16(), depending upon the arguments the user supplies. As before, once we change position we don't have a clear idea of what the current logical position of the tape drive is. For tape drives that support long form position data, we read the current position and store that for later reporting after changing the position. This should help applications like Bacula speed tape access under FreeBSD once they are modified to support the new ioctls. Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all drives that report SCSI-2 or older, as well as drives that report an Illegal Request type error for READ POSITION with the long format. So we should automatically detect drives that don't support the long form and stop asking for it after an initial try. Add a partition number to the sa(4) softc. Improve device departure handling. The previous implementation led to hangs when the device was open. If an application had the sa(4) driver open, and attempted to close it after it went away, the cam_periph_release() call in saclose() would cause the periph to get destroyed because that was the last reference to it. Because destroy_dev() was called from the sa(4) driver's cleanup routine (sacleanup()), and would block waiting for the close to happen, a deadlock would result. So instead of calling destroy_dev() from the cleanup routine, call destroy_dev_sched_cb() from saoninvalidate() and wait for the callback. Acquire a reference for devfs in saregister(), and release it in the new sadevgonecb() routine when all devfs devices for the particular sa(4) driver instance are gone. Add a new function, sasetupdev(), to centralize setting per-instance devfs device parameters instead of repeating the code in saregister(). Add an open count to the softc, so we know how many peripheral driver references are a result of open sessions. Add the D_TRACKCLOSE flag to the cdevsw flags so that we get a 1:1 mapping of open to close calls instead of a N:1 mapping. This should be a no-op for everything except the control device, since we don't allow more than one open on non-control devices. However, since we do allow multiple opens on the control device, the combination of the open count and the D_TRACKCLOSE flag should result in an accurate peripheral driver reference count, and an accurate open count. The accurate open count allows us to release all peripheral driver references that are the result of open contexts once we get the callback from devfs. sys/sys/mtio.h: Add a number of new mt(4) ioctls and the requisite data structures. None of the existing interfaces been removed or changed. This includes definitions for the following new ioctls: MTIOCRBLIM /* get block limits */ MTIOCEXTLOCATE /* seek to position */ MTIOCEXTGET /* get tape status */ MTIOCPARAMGET /* get tape params */ MTIOCPARAMSET /* set tape params */ MTIOCSETLIST /* set N params */ usr.bin/mt/Makefile: mt(1) now depends on libmt, libsbuf and libbsdxml. usr.bin/mt/mt.1: Document new mt(1) features and subcommands. usr.bin/mt/mt.c: Implement support for mt(1) subcommands that need to use getopt(3) for their arguments. Implement a new 'mt status' command to replace the old 'mt status' command. The old status command has been renamed 'ostatus'. The new status function uses the MTIOCEXTGET ioctl, and therefore parses the XML data to determine drive status. The -x argument to 'mt status' allows the user to dump out the raw XML reported by the kernel. The new status display is mostly the same as the old status display, except that it doesn't print the redundant density mode information, and it does print the current partition number and position flags. Add a new command, 'mt locate', that will supersede the old 'mt setspos' and 'mt sethpos' commands. 'mt locate' implements all of the functionality of the MTIOCEXTLOCATE ioctl, and allows the user to change the logical position of the tape drive in a number of ways. (Partition, block number, file number, set mark number, end of data.) The immediate bit and the explicit address bits are implemented, but not documented in the man page. Add a new 'mt weofi' command to use the new MTWEOFI ioctl. This allows the user to ask the drive to write a filemark without waiting around for the operation to complete. Add a new 'mt getdensity' command that gets the XML-based tape drive density report from the sa(4) driver and displays it. This uses the SCSI REPORT DENSITY SUPPORT command to get comprehensive information from the tape drive about what formats it is able to read and write. Add a new 'mt protect' command that allows getting and setting tape drive protection information. The protection information is a CRC tacked on to the end of every read/write from and to the tape drive. Sponsored by: Spectra Logic MFC after: 1 month
2015-02-23 21:59:30 +00:00
libmt \
${_libnandfs} \
libnetbsd \
${_libnetgraph} \
${_libngatm} \
libnv \
libopenbsd \
libopie \
libpam \
libpcap \
libpjdlog \
${_libpmc} \
${_libproc} \
libprocstat \
${_libradius} \
librpcsvc \
librt \
${_librtld_db} \
libsbuf \
${_libsdp} \
${_libsm} \
${_libsmb} \
${_libsmdb} \
${_libsmutil} \
libsqlite3 \
libstand \
libstdbuf \
libstdthreads \
libtacplus \
${_libtelnet} \
${_libthr} \
libthread_db \
2014-02-23 21:50:11 +00:00
libucl \
libufs \
libugidfw \
libulog \
${_libunbound} \
${_libusbhid} \
${_libusb} \
libutil \
${_libvgl} \
${_libvmmapi} \
libwrap \
libxo \
liby \
${_libypclnt} \
libz \
ncurses \
${_atf} \
${_clang} \
${_cuse} \
${_tests}
1994-05-27 05:00:24 +00:00
# Inter-library dependencies. When the makefile for a library contains LDADD
# libraries, those libraries should be listed as build order dependencies here.
SUBDIR_DEPEND_libarchive= libz libbz2 libexpat liblzma libmd
SUBDIR_DEPEND_libatm= libmd
SUBDIR_DEPEND_libauditdm= libbsm
SUBDIR_DEPEND_libbsnmp= ${_libnetgraph}
SUBDIR_DEPEND_libc++:= libcxxrt
SUBDIR_DEPEND_libc= libcompiler_rt
SUBDIR_DEPEND_libcam= libsbuf
SUBDIR_DEPEND_libcapsicum= libnv
SUBDIR_DEPEND_libcasper= libcapsicum libnv libpjdlog
SUBDIR_DEPEND_libdevstat= libkvm
SUBDIR_DEPEND_libdpv= libfigpar ncurses libutil
SUBDIR_DEPEND_libedit= ncurses
SUBDIR_DEPEND_libgeom= libexpat libsbuf
SUBDIR_DEPEND_liblibrpcsec_gss= libgssapi
SUBDIR_DEPEND_libmagic= libz
SUBDIR_DEPEND_libmemstat= libkvm
SUBDIR_DEPEND_libopie= libmd
SUBDIR_DEPEND_libpam= libcrypt libopie ${_libradius} librpcsvc libtacplus libutil ${_libypclnt} ${_libcom_err}
SUBDIR_DEPEND_libpjdlog= libutil
SUBDIR_DEPEND_libprocstat= libkvm libutil
SUBDIR_DEPEND_libradius= libmd
SUBDIR_DEPEND_libsmb= libkiconv
SUBDIR_DEPEND_libtacplus= libmd
SUBDIR_DEPEND_libulog= libmd
SUBDIR_DEPEND_libunbound= ${_libldns}
SUBDIR_DEPEND_liblzma= ${_libthr}
# NB: keep these sorted by MK_* knobs
.if ${MK_ATM} != "no"
_libngatm= libngatm
.endif
.if ${MK_BLUETOOTH} != "no"
_libbluetooth= libbluetooth
_libsdp= libsdp
.endif
.if ${MK_BSNMP} != "no"
_libbsnmp= libbsnmp
.endif
.if ${MK_CASPER} != "no"
_libcapsicum= libcapsicum
_libcasper= libcasper
.endif
.if ${MK_CLANG} != "no" && !defined(COMPAT_32BIT)
_clang= clang
.endif
.if ${MK_CUSE} != "no"
_cuse= libcuse
.endif
.if ${MK_TOOLCHAIN} != "no"
_libelftc= libelftc
.endif
.if ${MK_FILE} != "no"
_libmagic= libmagic
.endif
.if ${MK_GPIO} != "no"
_libgpio= libgpio
.endif
.if ${MK_GSSAPI} != "no"
_libgssapi= libgssapi
_librpcsec_gss= librpcsec_gss
.endif
Add the BSD-licensed Citrus iconv to the base system with default off setting. It can be built by setting the WITH_ICONV knob. While this knob is unset, the library part, the binaries, the header file and the metadata files will not be built or installed so it makes no impact on the system if left turned off. This work is based on the iconv implementation in NetBSD but a great number of improvements and feature additions have been included: - Some utilities have been added. There is a conversion table generator, which can compare conversion tables to reference data generated by GNU libiconv. This helps ensuring conversion compatibility. - UTF-16 surrogate support and some endianness issues have been fixed. - The rather chaotic Makefiles to build metadata have been refactored and cleaned up, now it is easy to read and it is also easier to add support for new encodings. - A bunch of new encodings and encoding aliases have been added. - Support for 1->2, 1->3 and 1->4 mappings, which is needed for transliterating with flying accents as GNU does, like "u. - Lots of warnings have been fixed, the major part of the code is now WARNS=6 clean. - New section 1 and section 5 manual pages have been added. - Some GNU-specific calls have been implemented: iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into() - Support for GNU's //IGNORE suffix has been added. - The "-" argument for stdin is now recognized in iconv(1) as per POSIX. - The Big5 conversion module has been fixed. - The iconv.h header files is supposed to be compatible with the GNU version, i.e. sources should build with base iconv.h and GNU libiconv. It also includes a macro magic to deal with the char ** and const char ** incompatibility. - GNU compatibility: "" or "char" means the current local encoding in use - Various cleanups and style(9) fixes. Approved by: delphij (mentor) Obtained from: The NetBSD Project Sponsored by: Google Summer of Code 2009
2011-02-25 00:04:39 +00:00
.if ${MK_ICONV} != "no"
_libiconv_modules= libiconv_modules
.endif
.if ${MK_KERBEROS_SUPPORT} != "no"
_libcom_err= libcom_err
.endif
.if ${MK_LDNS} != "no"
_libldns= libldns
.endif
# The libraries under libclang_rt can only be built by clang, and only make
# sense to build when clang is enabled at all. Furthermore, they can only be
# built for certain architectures.
.if ${MK_CLANG} != "no" && ${COMPILER_TYPE} == "clang" && \
(${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \
(${MACHINE_CPUARCH} == "arm" && ${MACHINE_ARCH} != "armeb") || \
(${MACHINE_CPUARCH} == "i386"))
_libclang_rt= libclang_rt
.endif
.if ${MK_LIBCPLUSPLUS} != "no"
_libcxxrt= libcxxrt
_libcplusplus= libc++
.endif
.if ${MK_LIBTHR} != "no"
_libthr= libthr
.endif
.if ${MK_NAND} != "no"
_libnandfs= libnandfs
.endif
.if ${MK_NETGRAPH} != "no"
_libnetgraph= libnetgraph
.endif
.if ${MK_NIS} != "no"
_libypclnt= libypclnt
.endif
.if ${MK_PF} != "no"
_libevent= libevent
.endif
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
_libsmb= libsmb
_libvgl= libvgl
_libproc= libproc
_librtld_db= librtld_db
2003-06-01 00:32:21 +00:00
.endif
2011-10-27 04:56:53 +00:00
.if ${MACHINE_CPUARCH} == "amd64"
.if ${MK_BHYVE} != "no"
2011-10-27 04:56:53 +00:00
_libvmmapi= libvmmapi
.endif
.endif
2011-10-27 04:56:53 +00:00
2012-03-24 05:18:27 +00:00
.if ${MACHINE_CPUARCH} == "mips"
_libproc= libproc
_librtld_db= librtld_db
.endif
.if ${MACHINE_CPUARCH} == "powerpc"
_libproc= libproc
_librtld_db= librtld_db
_libsmb= libsmb
.endif
.if ${MACHINE_CPUARCH} == "sparc64"
_libsmb= libsmb
.endif
.if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "arm"
_libsmb= libsmb
_libproc= libproc
_librtld_db= librtld_db
.endif
.if ${MK_OPENSSL} != "no"
_libmp= libmp
.endif
.if ${MK_PMC} != "no"
_libpmc= libpmc
.endif
.if ${MK_RADIUS_SUPPORT} != "no"
_libradius= libradius
.endif
.if ${MK_SENDMAIL} != "no"
_libmilter= libmilter
_libsm= libsm
_libsmdb= libsmdb
_libsmutil= libsmutil
2004-03-10 08:58:06 +00:00
.endif
.if ${MK_TELNET} != "no"
_libtelnet= libtelnet
.endif
.if ${MK_TESTS_SUPPORT} != "no"
_atf= atf
.endif
.if ${MK_TESTS} != "no"
_tests= tests
.endif
.if ${MK_UNBOUND} != "no"
_libunbound= libunbound
.endif
.if ${MK_USB} != "no"
_libusbhid= libusbhid
_libusb= libusb
.endif
.if !defined(LIBRARIES_ONLY)
afterinstall:
${INSTALL_SYMLINK} ../include ${DESTDIR}/usr/lib/include
.endif
.if !make(install)
SUBDIR_PARALLEL=
.endif
1994-05-27 05:00:24 +00:00
.include <bsd.subdir.mk>