freebsd-dev/sys/arm/s3c2xx0/s3c2410reg.h

97 lines
3.4 KiB
C
Raw Normal View History

/* $NetBSD: s3c2410reg.h,v 1.6 2004/02/12 03:52:46 bsh Exp $ */
/*-
* Copyright (c) 2003, 2004 Genetec corporation. All rights reserved.
* Written by Hiroyuki Bessho for Genetec corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of Genetec corporation may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY GENETEC CORP. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORP.
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Samsung S3C2410X processor is ARM920T based integrated CPU
*
* Reference:
* S3C2410X User's Manual
*/
#ifndef _ARM_S3C2XX0_S3C2410REG_H_
#define _ARM_S3C2XX0_S3C2410REG_H_
/* common definitions for S3C2410 and S3C2440 */
#include <arm/s3c2xx0/s3c24x0reg.h>
/*
* Memory Map
*/
#define S3C2410_BANK_SIZE 0x08000000
#define S3C2410_BANK_START(n) (S3C2410_BANK_SIZE*(n))
#define S3C2410_SDRAM_START S3C2410_BANK_START(6)
/* interrupt control */
#define S3C2410_SUBIRQ_MAX (S3C24X0_SUBIRQ_MIN+10)
/* Clock control */
/* CLKMAN_CLKCON */
#define S3C2410_CLKCON_SM (1<<0) /* 1=transition to SPECIAL mode */
/* CLKMAN_CLKDIVN */
#define S3C2410_CLKDIVN_HDIVN (1<<1) /* hclk=fclk/2 */
/* NAND Flash controller */
#define S3C2410_NANDFC_SIZE 0x18
/* NANDFC_NFCONF */
#define S3C2410_NFCONF_ENABLE (1<<15) /* NAND controller enabled */
#define S3C2410_NFCONF_ECC (1<<12) /* Initialize ECC decoder/encoder */
#define S3C2410_NFCONF_FCE (1<<11) /* Flash chip enabled */
#define S3C2410_NFCONF_TACLS (7<<8) /* CLE and ALE duration */
#define S3C2410_NFCONF_TWRPH0 (7<<4) /* TWRPH0 duration */
#define S3C2410_NFCONF_TWRPH1 (7<<0) /* TWRPH1 duration */
#define S3C2410_NANDFC_NFCMD 0x04 /* command */
#define S3C2410_NANDFC_NFADDR 0x08 /* address */
#define S3C2410_NANDFC_NFDATA 0x0c /* data */
#define S3C2410_NANDFC_NFSTAT 0x10 /* operation status */
#define S3C2410_NANDFC_NFECC 0x14 /* ecc */
/* MMC/SD */
/* SDI_CON */
#define S3C2410_CON_FIFO_RESET (1<<1)
/* GPIO */
#define S3C2410_GPIO_SIZE 0xb4
/* SD interface */
#define S3C2410_SDI_SIZE 0x44
#define DCON_STOP (1<<14) /* Force the transfer to stop */
#define S3C2410_SDI_DAT 0x3c
#define S3C2410_SDI_IMSK 0x40 /* Interrupt mask */
#define S3C2410_SDI_IMASK_ALL 0x3ffdf
/* ADC */
#define S3C2410_ADC_SIZE 0x14
#endif /* _ARM_S3C2XX0_S3C2410REG_H_ */