freebsd-dev/sbin/dump/tape.c

856 lines
21 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1980, 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
#if 0
static char sccsid[] = "@(#)tape.c 8.4 (Berkeley) 5/1/95";
#endif
static const char rcsid[] =
1999-08-28 00:22:10 +00:00
"$FreeBSD$";
#endif /* not lint */
#include <sys/param.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <sys/wait.h>
#include <sys/stat.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <protocols/dumprestore.h>
#include <errno.h>
#include <fcntl.h>
#include <setjmp.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "dump.h"
int writesize; /* size of malloc()ed buffer for tape */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int64_t lastspclrec = -1; /* tape block number of last written header */
int trecno = 0; /* next record to write in current block */
extern long blocksperfile; /* number of blocks per output file */
long blocksthisvol; /* number of blocks on current output file */
extern int ntrec; /* blocking factor on tape */
extern int cartridge;
extern char *host;
char *nexttape;
static int atomic(ssize_t (*)(), int, char *, int);
static void doslave(int, int);
static void enslave(void);
static void flushtape(void);
static void killall(void);
static void rollforward(void);
/*
* Concurrent dump mods (Caltech) - disk block reading and tape writing
* are exported to several slave processes. While one slave writes the
* tape, the others read disk blocks; they pass control of the tape in
* a ring via signals. The parent process traverses the filesystem and
* sends writeheader()'s and lists of daddr's to the slaves via pipes.
* The following structure defines the instruction packets sent to slaves.
*/
struct req {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t dblk;
int count;
};
int reqsiz;
#define SLAVES 3 /* 1 slave writing, 1 reading, 1 for slack */
struct slave {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int64_t tapea; /* header number at start of this chunk */
int64_t firstrec; /* record number of this block */
int count; /* count to next header (used for TS_TAPE */
/* after EOT) */
int inode; /* inode that we are currently dealing with */
int fd; /* FD for this slave */
int pid; /* PID for this slave */
int sent; /* 1 == we've sent this slave requests */
char (*tblock)[TP_BSIZE]; /* buffer for data blocks */
struct req *req; /* buffer for requests */
} slaves[SLAVES+1];
struct slave *slp;
char (*nextblock)[TP_BSIZE];
int master; /* pid of master, for sending error signals */
int tenths; /* length of tape used per block written */
static int caught; /* have we caught the signal to proceed? */
static int ready; /* have we reached the lock point without having */
/* received the SIGUSR2 signal from the prev slave? */
static jmp_buf jmpbuf; /* where to jump to if we are ready when the */
/* SIGUSR2 arrives from the previous slave */
int
alloctape(void)
{
int pgoff = getpagesize() - 1;
char *buf;
int i;
writesize = ntrec * TP_BSIZE;
reqsiz = (ntrec + 1) * sizeof(struct req);
/*
* CDC 92181's and 92185's make 0.8" gaps in 1600-bpi start/stop mode
* (see DEC TU80 User's Guide). The shorter gaps of 6250-bpi require
* repositioning after stopping, i.e, streaming mode, where the gap is
* variable, 0.30" to 0.45". The gap is maximal when the tape stops.
*/
if (blocksperfile == 0 && !unlimited)
tenths = writesize / density +
(cartridge ? 16 : density == 625 ? 5 : 8);
/*
* Allocate tape buffer contiguous with the array of instruction
* packets, so flushtape() can write them together with one write().
* Align tape buffer on page boundary to speed up tape write().
*/
for (i = 0; i <= SLAVES; i++) {
buf = (char *)
malloc((unsigned)(reqsiz + writesize + pgoff + TP_BSIZE));
if (buf == NULL)
return(0);
slaves[i].tblock = (char (*)[TP_BSIZE])
(((long)&buf[ntrec + 1] + pgoff) &~ pgoff);
slaves[i].req = (struct req *)slaves[i].tblock - ntrec - 1;
}
slp = &slaves[0];
slp->count = 1;
slp->tapea = 0;
slp->firstrec = 0;
nextblock = slp->tblock;
return(1);
}
void
writerec(char *dp, int isspcl)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
slp->req[trecno].dblk = (ufs2_daddr_t)0;
slp->req[trecno].count = 1;
/* Can't do a structure assignment due to alignment problems */
1999-05-03 13:53:16 +00:00
bcopy(dp, *(nextblock)++, sizeof (union u_spcl));
if (isspcl)
lastspclrec = spcl.c_tapea;
trecno++;
spcl.c_tapea++;
if (trecno >= ntrec)
flushtape();
}
void
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dumpblock(ufs2_daddr_t blkno, int size)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int avail, tpblks;
ufs2_daddr_t dblkno;
dblkno = fsbtodb(sblock, blkno);
tpblks = size >> tp_bshift;
while ((avail = MIN(tpblks, ntrec - trecno)) > 0) {
slp->req[trecno].dblk = dblkno;
slp->req[trecno].count = avail;
trecno += avail;
spcl.c_tapea += avail;
if (trecno >= ntrec)
flushtape();
dblkno += avail << (tp_bshift - dev_bshift);
tpblks -= avail;
}
}
int nogripe = 0;
void
tperror(int signo __unused)
{
if (pipeout) {
msg("write error on %s\n", tape);
quit("Cannot recover\n");
/* NOTREACHED */
}
msg("write error %d blocks into volume %d\n", blocksthisvol, tapeno);
broadcast("DUMP WRITE ERROR!\n");
if (!query("Do you want to restart?"))
dumpabort(0);
msg("Closing this volume. Prepare to restart with new media;\n");
msg("this dump volume will be rewritten.\n");
killall();
nogripe = 1;
close_rewind();
Exit(X_REWRITE);
}
void
sigpipe(int signo __unused)
{
quit("Broken pipe\n");
}
static void
flushtape(void)
{
int i, blks, got;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int64_t lastfirstrec;
int siz = (char *)nextblock - (char *)slp->req;
slp->req[trecno].count = 0; /* Sentinel */
if (atomic(write, slp->fd, (char *)slp->req, siz) != siz)
quit("error writing command pipe: %s\n", strerror(errno));
slp->sent = 1; /* we sent a request, read the response later */
lastfirstrec = slp->firstrec;
if (++slp >= &slaves[SLAVES])
slp = &slaves[0];
/* Read results back from next slave */
if (slp->sent) {
if (atomic(read, slp->fd, (char *)&got, sizeof got)
!= sizeof got) {
perror(" DUMP: error reading command pipe in master");
dumpabort(0);
}
slp->sent = 0;
/* Check for end of tape */
if (got < writesize) {
msg("End of tape detected\n");
/*
* Drain the results, don't care what the values were.
* If we read them here then trewind won't...
*/
for (i = 0; i < SLAVES; i++) {
if (slaves[i].sent) {
if (atomic(read, slaves[i].fd,
(char *)&got, sizeof got)
!= sizeof got) {
perror(" DUMP: error reading command pipe in master");
dumpabort(0);
}
slaves[i].sent = 0;
}
}
close_rewind();
rollforward();
return;
}
}
blks = 0;
if (spcl.c_type != TS_END) {
for (i = 0; i < spcl.c_count; i++)
if (spcl.c_addr[i] != 0)
blks++;
}
slp->count = lastspclrec + blks + 1 - spcl.c_tapea;
slp->tapea = spcl.c_tapea;
slp->firstrec = lastfirstrec + ntrec;
slp->inode = curino;
nextblock = slp->tblock;
trecno = 0;
asize += tenths;
blockswritten += ntrec;
blocksthisvol += ntrec;
if (!pipeout && !unlimited && (blocksperfile ?
(blocksthisvol >= blocksperfile) : (asize > tsize))) {
close_rewind();
startnewtape(0);
}
timeest();
}
void
trewind(void)
{
struct stat sb;
int f;
int got;
for (f = 0; f < SLAVES; f++) {
/*
1995-05-30 06:12:45 +00:00
* Drain the results, but unlike EOT we DO (or should) care
* what the return values were, since if we detect EOT after
* we think we've written the last blocks to the tape anyway,
* we have to replay those blocks with rollforward.
*
1995-05-30 06:12:45 +00:00
* fixme: punt for now.
*/
if (slaves[f].sent) {
if (atomic(read, slaves[f].fd, (char *)&got, sizeof got)
!= sizeof got) {
perror(" DUMP: error reading command pipe in master");
dumpabort(0);
}
slaves[f].sent = 0;
if (got != writesize) {
msg("EOT detected in last 2 tape records!\n");
msg("Use a longer tape, decrease the size estimate\n");
quit("or use no size estimate at all.\n");
}
}
(void) close(slaves[f].fd);
}
while (wait((int *)NULL) >= 0) /* wait for any signals from slaves */
/* void */;
if (pipeout)
return;
msg("Closing %s\n", tape);
#ifdef RDUMP
if (host) {
rmtclose();
while (rmtopen(tape, 0) < 0)
sleep(10);
rmtclose();
return;
}
#endif
if (fstat(tapefd, &sb) == 0 && S_ISFIFO(sb.st_mode)) {
(void)close(tapefd);
return;
}
(void) close(tapefd);
while ((f = open(tape, 0)) < 0)
sleep (10);
(void) close(f);
}
void
close_rewind()
{
time_t tstart_changevol, tend_changevol;
trewind();
if (nexttape)
return;
(void)time((time_t *)&(tstart_changevol));
if (!nogripe) {
msg("Change Volumes: Mount volume #%d\n", tapeno+1);
broadcast("CHANGE DUMP VOLUMES!\a\a\n");
}
while (!query("Is the new volume mounted and ready to go?"))
if (query("Do you want to abort?")) {
dumpabort(0);
/*NOTREACHED*/
}
(void)time((time_t *)&(tend_changevol));
if ((tstart_changevol != (time_t)-1) && (tend_changevol != (time_t)-1))
tstart_writing += (tend_changevol - tstart_changevol);
}
void
rollforward(void)
{
struct req *p, *q, *prev;
struct slave *tslp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int i, size, got;
int64_t savedtapea;
union u_spcl *ntb, *otb;
tslp = &slaves[SLAVES];
ntb = (union u_spcl *)tslp->tblock[1];
/*
1995-05-30 06:12:45 +00:00
* Each of the N slaves should have requests that need to
* be replayed on the next tape. Use the extra slave buffers
* (slaves[SLAVES]) to construct request lists to be sent to
* each slave in turn.
*/
for (i = 0; i < SLAVES; i++) {
q = &tslp->req[1];
otb = (union u_spcl *)slp->tblock;
/*
1995-05-30 06:12:45 +00:00
* For each request in the current slave, copy it to tslp.
*/
prev = NULL;
for (p = slp->req; p->count > 0; p += p->count) {
*q = *p;
if (p->dblk == 0)
*ntb++ = *otb++; /* copy the datablock also */
prev = q;
q += q->count;
}
if (prev == NULL)
quit("rollforward: protocol botch");
if (prev->dblk != 0)
prev->count -= 1;
else
ntb--;
q -= 1;
q->count = 0;
q = &tslp->req[0];
if (i == 0) {
q->dblk = 0;
q->count = 1;
trecno = 0;
nextblock = tslp->tblock;
savedtapea = spcl.c_tapea;
spcl.c_tapea = slp->tapea;
startnewtape(0);
spcl.c_tapea = savedtapea;
lastspclrec = savedtapea - 1;
}
size = (char *)ntb - (char *)q;
if (atomic(write, slp->fd, (char *)q, size) != size) {
perror(" DUMP: error writing command pipe");
dumpabort(0);
}
slp->sent = 1;
if (++slp >= &slaves[SLAVES])
slp = &slaves[0];
q->count = 1;
if (prev->dblk != 0) {
/*
1995-05-30 06:12:45 +00:00
* If the last one was a disk block, make the
* first of this one be the last bit of that disk
* block...
*/
q->dblk = prev->dblk +
prev->count * (TP_BSIZE / DEV_BSIZE);
ntb = (union u_spcl *)tslp->tblock;
} else {
/*
1995-05-30 06:12:45 +00:00
* It wasn't a disk block. Copy the data to its
* new location in the buffer.
*/
q->dblk = 0;
*((union u_spcl *)tslp->tblock) = *ntb;
ntb = (union u_spcl *)tslp->tblock[1];
}
}
slp->req[0] = *q;
nextblock = slp->tblock;
if (q->dblk == 0)
nextblock++;
trecno = 1;
/*
* Clear the first slaves' response. One hopes that it
* worked ok, otherwise the tape is much too short!
*/
if (slp->sent) {
if (atomic(read, slp->fd, (char *)&got, sizeof got)
!= sizeof got) {
perror(" DUMP: error reading command pipe in master");
dumpabort(0);
}
slp->sent = 0;
if (got != writesize) {
quit("EOT detected at start of the tape!\n");
}
}
}
/*
* We implement taking and restoring checkpoints on the tape level.
* When each tape is opened, a new process is created by forking; this
* saves all of the necessary context in the parent. The child
* continues the dump; the parent waits around, saving the context.
* If the child returns X_REWRITE, then it had problems writing that tape;
* this causes the parent to fork again, duplicating the context, and
* everything continues as if nothing had happened.
*/
void
startnewtape(int top)
{
int parentpid;
int childpid;
int status;
int waitpid;
char *p;
sig_t interrupt_save;
interrupt_save = signal(SIGINT, SIG_IGN);
parentpid = getpid();
restore_check_point:
(void)signal(SIGINT, interrupt_save);
/*
* All signals are inherited...
*/
setproctitle(NULL); /* Restore the proctitle. */
childpid = fork();
if (childpid < 0) {
msg("Context save fork fails in parent %d\n", parentpid);
Exit(X_ABORT);
}
if (childpid != 0) {
/*
* PARENT:
* save the context by waiting
* until the child doing all of the work returns.
* don't catch the interrupt
*/
signal(SIGINT, SIG_IGN);
#ifdef TDEBUG
msg("Tape: %d; parent process: %d child process %d\n",
tapeno+1, parentpid, childpid);
#endif /* TDEBUG */
while ((waitpid = wait(&status)) != childpid)
msg("Parent %d waiting for child %d has another child %d return\n",
parentpid, childpid, waitpid);
if (status & 0xFF) {
msg("Child %d returns LOB status %o\n",
childpid, status&0xFF);
}
status = (status >> 8) & 0xFF;
#ifdef TDEBUG
switch(status) {
case X_FINOK:
msg("Child %d finishes X_FINOK\n", childpid);
break;
1995-05-30 06:12:45 +00:00
case X_ABORT:
msg("Child %d finishes X_ABORT\n", childpid);
break;
case X_REWRITE:
msg("Child %d finishes X_REWRITE\n", childpid);
break;
default:
msg("Child %d finishes unknown %d\n",
childpid, status);
break;
}
#endif /* TDEBUG */
switch(status) {
case X_FINOK:
Exit(X_FINOK);
case X_ABORT:
Exit(X_ABORT);
case X_REWRITE:
goto restore_check_point;
default:
msg("Bad return code from dump: %d\n", status);
Exit(X_ABORT);
}
/*NOTREACHED*/
} else { /* we are the child; just continue */
#ifdef TDEBUG
sleep(4); /* allow time for parent's message to get out */
msg("Child on Tape %d has parent %d, my pid = %d\n",
tapeno+1, parentpid, getpid());
#endif /* TDEBUG */
/*
* If we have a name like "/dev/rmt0,/dev/rmt1",
* use the name before the comma first, and save
* the remaining names for subsequent volumes.
*/
tapeno++; /* current tape sequence */
if (nexttape || strchr(tape, ',')) {
if (nexttape && *nexttape)
tape = nexttape;
if ((p = strchr(tape, ',')) != NULL) {
*p = '\0';
nexttape = p + 1;
} else
nexttape = NULL;
msg("Dumping volume %d on %s\n", tapeno, tape);
}
#ifdef RDUMP
while ((tapefd = (host ? rmtopen(tape, 2) :
pipeout ? 1 : open(tape, O_WRONLY|O_CREAT, 0666))) < 0)
#else
1995-05-30 06:12:45 +00:00
while ((tapefd = (pipeout ? 1 :
open(tape, O_WRONLY|O_CREAT, 0666))) < 0)
#endif
{
msg("Cannot open output \"%s\".\n", tape);
if (!query("Do you want to retry the open?"))
dumpabort(0);
}
enslave(); /* Share open tape file descriptor with slaves */
signal(SIGINFO, infosch);
asize = 0;
blocksthisvol = 0;
if (top)
newtape++; /* new tape signal */
1995-05-30 06:12:45 +00:00
spcl.c_count = slp->count;
/*
* measure firstrec in TP_BSIZE units since restore doesn't
* know the correct ntrec value...
*/
spcl.c_firstrec = slp->firstrec;
spcl.c_volume++;
spcl.c_type = TS_TAPE;
writeheader((ino_t)slp->inode);
if (tapeno > 1)
msg("Volume %d begins with blocks from inode %d\n",
tapeno, slp->inode);
}
}
void
dumpabort(int signo __unused)
{
if (master != 0 && master != getpid())
/* Signals master to call dumpabort */
(void) kill(master, SIGTERM);
else {
killall();
msg("The ENTIRE dump is aborted.\n");
}
#ifdef RDUMP
rmtclose();
#endif
Exit(X_ABORT);
}
void
Exit(status)
int status;
{
#ifdef TDEBUG
msg("pid = %d exits with status %d\n", getpid(), status);
#endif /* TDEBUG */
exit(status);
}
/*
* proceed - handler for SIGUSR2, used to synchronize IO between the slaves.
*/
void
proceed(int signo __unused)
{
if (ready)
longjmp(jmpbuf, 1);
caught++;
}
void
enslave(void)
{
int cmd[2];
int i, j;
master = getpid();
signal(SIGTERM, dumpabort); /* Slave sends SIGTERM on dumpabort() */
signal(SIGPIPE, sigpipe);
signal(SIGUSR1, tperror); /* Slave sends SIGUSR1 on tape errors */
signal(SIGUSR2, proceed); /* Slave sends SIGUSR2 to next slave */
for (i = 0; i < SLAVES; i++) {
if (i == slp - &slaves[0]) {
caught = 1;
} else {
caught = 0;
}
if (socketpair(AF_UNIX, SOCK_STREAM, 0, cmd) < 0 ||
(slaves[i].pid = fork()) < 0)
quit("too many slaves, %d (recompile smaller): %s\n",
i, strerror(errno));
slaves[i].fd = cmd[1];
slaves[i].sent = 0;
if (slaves[i].pid == 0) { /* Slave starts up here */
for (j = 0; j <= i; j++)
(void) close(slaves[j].fd);
signal(SIGINT, SIG_IGN); /* Master handles this */
doslave(cmd[0], i);
Exit(X_FINOK);
}
}
1995-05-30 06:12:45 +00:00
for (i = 0; i < SLAVES; i++)
1995-05-30 06:12:45 +00:00
(void) atomic(write, slaves[i].fd,
(char *) &slaves[(i + 1) % SLAVES].pid,
sizeof slaves[0].pid);
1995-05-30 06:12:45 +00:00
master = 0;
}
void
killall(void)
{
int i;
for (i = 0; i < SLAVES; i++)
if (slaves[i].pid > 0) {
(void) kill(slaves[i].pid, SIGKILL);
slaves[i].sent = 0;
}
}
/*
* Synchronization - each process has a lockfile, and shares file
* descriptors to the following process's lockfile. When our write
* completes, we release our lock on the following process's lock-
* file, allowing the following process to lock it and proceed. We
* get the lock back for the next cycle by swapping descriptors.
*/
static void
doslave(int cmd, int slave_number)
{
int nread;
int nextslave, size, wrote, eot_count;
/*
* Need our own seek pointer.
*/
(void) close(diskfd);
if ((diskfd = open(disk, O_RDONLY)) < 0)
quit("slave couldn't reopen disk: %s\n", strerror(errno));
/*
* Need the pid of the next slave in the loop...
*/
if ((nread = atomic(read, cmd, (char *)&nextslave, sizeof nextslave))
!= sizeof nextslave) {
quit("master/slave protocol botched - didn't get pid of next slave.\n");
}
/*
* Get list of blocks to dump, read the blocks into tape buffer
*/
while ((nread = atomic(read, cmd, (char *)slp->req, reqsiz)) == reqsiz) {
struct req *p = slp->req;
for (trecno = 0; trecno < ntrec;
trecno += p->count, p += p->count) {
if (p->dblk) {
bread(p->dblk, slp->tblock[trecno],
p->count * TP_BSIZE);
} else {
if (p->count != 1 || atomic(read, cmd,
1995-05-30 06:12:45 +00:00
(char *)slp->tblock[trecno],
TP_BSIZE) != TP_BSIZE)
quit("master/slave protocol botched.\n");
}
}
if (setjmp(jmpbuf) == 0) {
ready = 1;
if (!caught)
(void) pause();
}
ready = 0;
caught = 0;
/* Try to write the data... */
eot_count = 0;
size = 0;
while (eot_count < 10 && size < writesize) {
#ifdef RDUMP
if (host)
wrote = rmtwrite(slp->tblock[0]+size,
writesize-size);
else
#endif
wrote = write(tapefd, slp->tblock[0]+size,
writesize-size);
#ifdef WRITEDEBUG
printf("slave %d wrote %d\n", slave_number, wrote);
#endif
1995-05-30 06:12:45 +00:00
if (wrote < 0)
break;
if (wrote == 0)
eot_count++;
size += wrote;
}
#ifdef WRITEDEBUG
1995-05-30 06:12:45 +00:00
if (size != writesize)
printf("slave %d only wrote %d out of %d bytes and gave up.\n",
slave_number, size, writesize);
#endif
/*
* Handle ENOSPC as an EOT condition.
*/
if (wrote < 0 && errno == ENOSPC) {
wrote = 0;
eot_count++;
}
if (eot_count > 0)
size = 0;
if (wrote < 0) {
(void) kill(master, SIGUSR1);
for (;;)
(void) sigpause(0);
} else {
/*
* pass size of write back to master
* (for EOT handling)
*/
(void) atomic(write, cmd, (char *)&size, sizeof size);
1995-05-30 06:12:45 +00:00
}
/*
* If partial write, don't want next slave to go.
* Also jolts him awake.
*/
(void) kill(nextslave, SIGUSR2);
}
if (nread != 0)
quit("error reading command pipe: %s\n", strerror(errno));
}
/*
* Since a read from a pipe may not return all we asked for,
* or a write may not write all we ask if we get a signal,
* loop until the count is satisfied (or error).
*/
static int
atomic(ssize_t (*func)(), int fd, char *buf, int count)
{
int got, need = count;
while ((got = (*func)(fd, buf, need)) > 0 && (need -= got) > 0)
buf += got;
return (got < 0 ? got : count - need);
}