d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
183df580c7
freebsd-dev/usr.sbin/ppp/bundle.c

1251 lines
34 KiB
C
Raw Normal View History

Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
/*-
* Copyright (c) 1998 Brian Somers <brian@Awfulhak.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
* $Id: bundle.c,v 1.1.2.71 1998/05/05 03:01:24 brian Exp $
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
*/
o Move alias function pointers into loadalias.c o Move Var*Version into command.c o Remove struct pppVars (and there was much rejoicing) ! o Forward-decl some structs in .h files to avoid include ordering requirements and remove a few more redundant #includes.
1998-04-07 00:54:26 +00:00
#include <sys/types.h>
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include <sys/socket.h>
#include <netinet/in.h>
#include <net/if.h>
#include <arpa/inet.h>
#include <net/route.h>
#include <net/if_dl.h>
Move VJ compression state and stats into struct ipcp.
1998-03-16 22:54:35 +00:00
#include <netinet/in_systm.h>
#include <netinet/ip.h>
Make gcc-2.8.1 build ppp cleanly. Support OpenBSD again.
1998-04-25 10:49:52 +00:00
#include <net/if_tun.h>
o Add the link name to modem diagnostics. o Create struct mpserver as part of struct mp. mpserver creates a unix-domain socket based on the peers auth name and endpoint discriminator. If it already exists, ppp will ``pass the link'' over to the owner of the socket, joining it into the bundle of another ppp invocation, otherwise ppp waits for other invocations to pass it links through this socket. The final piece of code will be the code that flattens our datalink info and passes it down this channel (not yet implemented).
1998-04-28 01:25:46 +00:00
#include <sys/un.h>
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include <errno.h>
#include <fcntl.h>
o Use two `cat' processes to connect the modem to an already-running ppp. Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> o Use _PATH_DEVNULL rather than "/dev/null" o Be more paranoid about nuking running timers when transferring links.
1998-05-01 19:20:09 +00:00
#include <paths.h>
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include <stdio.h>
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
#include <stdlib.h>
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include <string.h>
#include <sys/ioctl.h>
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
#include <sys/uio.h>
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include <termios.h>
#include <unistd.h>
#include "command.h"
#include "mbuf.h"
#include "log.h"
#include "id.h"
#include "defs.h"
#include "timer.h"
#include "fsm.h"
#include "iplist.h"
De-staticise LQR information Increment OutPackets for any packet - not just LQRs MFC: o Fix a few comment typos. o Fix ``set timeout'' usage message and documentation. o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's so that they wrap correctly. o Put the LQR in network byte order using the correct struct size (sizeof u_int32_t, not sizeof u_long). o Wrap LQR ECHO counters correctly. o Don't increment OutLQR count if the last LQR hasn't been replied to. o Initialise last received LQR in StartLqm. o Don't start the LQR timer if we're `disabled' and `accepted'. o Generate LQR responses when both sides are using a timer and we're not going to send our next LQR before the peers max timeout.
1998-03-13 00:44:26 +00:00
#include "lqr.h"
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
#include "hdlc.h"
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include "throughput.h"
Move VJ compression state and stats into struct ipcp.
1998-03-16 22:54:35 +00:00
#include "slcompress.h"
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include "ipcp.h"
Move filter sets into struct bundle.
1998-03-16 22:52:54 +00:00
#include "filter.h"
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
#include "descriptor.h"
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
#include "route.h"
#include "lcp.h"
#include "ccp.h"
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
#include "link.h"
#include "mp.h"
#include "bundle.h"
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
#include "async.h"
#include "physical.h"
Move pppVars.physical into the bundle (for the moment).
1998-02-06 02:23:48 +00:00
#include "modem.h"
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
#include "auth.h"
#include "lcpproto.h"
#include "chap.h"
#include "tun.h"
Move the terminal/diagnostic socket stuff out of main.c and into the new `prompt.c'. struct prompt is (of course) a `sort' of descriptor.
1998-02-10 03:23:50 +00:00
#include "prompt.h"
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
#include "chat.h"
#include "datalink.h"
#include "ip.h"
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
#define SCATTER_SEGMENTS 4 /* version, datalink, name, physical */
#define SOCKET_OVERHEAD 100 /* additional buffer space for large */
/* {recv,send}msg() calls */
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
static const char *PhaseNames[] = {
"Dead", "Establish", "Authenticate", "Network", "Terminate"
};
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
const char *
bundle_PhaseName(struct bundle *bundle)
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
{
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
return bundle->phase <= PHASE_TERMINATE ?
PhaseNames[bundle->phase] : "unknown";
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
void
Remove the second bundle_NewPhase argument and do the tun config from bundle_LayerUp.
1998-03-13 00:44:33 +00:00
bundle_NewPhase(struct bundle *bundle, u_int new)
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
{
Introduce the ``link'' command for controlling individual links.
1998-02-17 19:28:01 +00:00
if (new == bundle->phase)
return;
Do authentication at the datalink level, not the bundle level. The bundle doesn't get a LayerUp 'till we're authenticated. Introduce DATALINK_LCP and DATALINK_AUTH phases.
1998-03-01 01:07:49 +00:00
if (new <= PHASE_TERMINATE)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "bundle: %s\n", PhaseNames[new]);
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
switch (new) {
case PHASE_DEAD:
bundle->phase = new;
break;
case PHASE_ESTABLISH:
bundle->phase = new;
break;
case PHASE_AUTHENTICATE:
Do authentication at the datalink level, not the bundle level. The bundle doesn't get a LayerUp 'till we're authenticated. Introduce DATALINK_LCP and DATALINK_AUTH phases.
1998-03-01 01:07:49 +00:00
bundle->phase = new;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
bundle_DisplayPrompt(bundle);
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
break;
case PHASE_NETWORK:
Move the IPCP into struct bundle.
1998-03-13 21:07:46 +00:00
ipcp_Setup(&bundle->ncp.ipcp);
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
fsm_Up(&bundle->ncp.ipcp.fsm);
fsm_Open(&bundle->ncp.ipcp.fsm);
o Initialise MP correctly depending on if we're the first link in mp_Up(). o Bring MP and its CCP down when we enter phase TERMINATE, and ditch everything in the incoming packet queue. o Enable MRRU negotiation. Now, we can multilink mode, but only with one physical link. o Close the link if the peer PROTO REJs PROTO_MP. o Prepend our protocol before passing a packet to struct mp for fragmentation. o Log info messages to DEBUG, not ERROR (oops). o Align `show mp' output (again).
1998-04-23 21:50:13 +00:00
bundle->phase = new;
bundle_DisplayPrompt(bundle);
break;
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
case PHASE_TERMINATE:
bundle->phase = new;
o Initialise MP correctly depending on if we're the first link in mp_Up(). o Bring MP and its CCP down when we enter phase TERMINATE, and ditch everything in the incoming packet queue. o Enable MRRU negotiation. Now, we can multilink mode, but only with one physical link. o Close the link if the peer PROTO REJs PROTO_MP. o Prepend our protocol before passing a packet to struct mp for fragmentation. o Log info messages to DEBUG, not ERROR (oops). o Align `show mp' output (again).
1998-04-23 21:50:13 +00:00
mp_Down(&bundle->ncp.mp);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
bundle_DisplayPrompt(bundle);
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
break;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
}
static int
bundle_CleanInterface(const struct bundle *bundle)
{
int s;
struct ifreq ifrq;
struct ifaliasreq ifra;
s = ID0socket(AF_INET, SOCK_DGRAM, 0);
if (s < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_CleanInterface: socket(): %s\n",
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
strerror(errno));
return (-1);
}
strncpy(ifrq.ifr_name, bundle->ifname, sizeof ifrq.ifr_name - 1);
ifrq.ifr_name[sizeof ifrq.ifr_name - 1] = '\0';
while (ID0ioctl(s, SIOCGIFADDR, &ifrq) == 0) {
memset(&ifra.ifra_mask, '\0', sizeof ifra.ifra_mask);
strncpy(ifra.ifra_name, bundle->ifname, sizeof ifra.ifra_name - 1);
ifra.ifra_name[sizeof ifra.ifra_name - 1] = '\0';
ifra.ifra_addr = ifrq.ifr_addr;
if (ID0ioctl(s, SIOCGIFDSTADDR, &ifrq) < 0) {
if (ifra.ifra_addr.sa_family == AF_INET)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR,
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
"bundle_CleanInterface: Can't get dst for %s on %s !\n",
inet_ntoa(((struct sockaddr_in *)&ifra.ifra_addr)->sin_addr),
bundle->ifname);
return 0;
}
ifra.ifra_broadaddr = ifrq.ifr_dstaddr;
if (ID0ioctl(s, SIOCDIFADDR, &ifra) < 0) {
if (ifra.ifra_addr.sa_family == AF_INET)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR,
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
"bundle_CleanInterface: Can't delete %s address on %s !\n",
inet_ntoa(((struct sockaddr_in *)&ifra.ifra_addr)->sin_addr),
bundle->ifname);
return 0;
}
}
return 1;
}
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
static void
bundle_LayerStart(void *v, struct fsm *fp)
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
{
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
/* The given FSM is about to start up ! */
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
Tidy up the parent notification stuff for -background mode. Remove extraneous extern decls of tun_{in,out} and netfd.
1998-03-25 18:38:59 +00:00
static void
bundle_Notify(struct bundle *bundle, char c)
{
if (bundle->notify.fd != -1) {
if (write(bundle->notify.fd, &c, 1) == 1)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "Parent notified of success.\n");
Tidy up the parent notification stuff for -background mode. Remove extraneous extern decls of tun_{in,out} and netfd.
1998-03-25 18:38:59 +00:00
else
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "Failed to notify parent of success.\n");
Tidy up the parent notification stuff for -background mode. Remove extraneous extern decls of tun_{in,out} and netfd.
1998-03-25 18:38:59 +00:00
close(bundle->notify.fd);
bundle->notify.fd = -1;
}
}
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
static void
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
bundle_LayerUp(void *v, struct fsm *fp)
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
{
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
/*
* The given fsm is now up
Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply multilink ('cos I've seen my ISP REQ it without multilink). Setting MRRU is ifdef'd out until it's debugged and we can merge -direct links with other running programs. Fix MTU setting.
1998-04-23 03:23:03 +00:00
* If it's an LCP set our mtu (if we're multilink, add up the link
* speeds and set the MRRU).
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
* If it's an NCP, tell our -background parent to go away.
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
* If it's the first NCP, start the idle timer.
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
*/
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
struct bundle *bundle = (struct bundle *)v;
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
Remove the second bundle_NewPhase argument and do the tun config from bundle_LayerUp.
1998-03-13 00:44:33 +00:00
if (fp->proto == PROTO_LCP) {
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (bundle->ncp.mp.active) {
int speed;
struct datalink *dl;
for (dl = bundle->links, speed = 0; dl; dl = dl->next)
o Use a tun speed of 115200 for each network link. o Display the link weight in `show links', and only show throughput for open links.
1998-05-05 03:01:32 +00:00
if (dl->state == DATALINK_OPEN)
speed += modem_Speed(dl->physical);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (speed)
Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply multilink ('cos I've seen my ISP REQ it without multilink). Setting MRRU is ifdef'd out until it's debugged and we can merge -direct links with other running programs. Fix MTU setting.
1998-04-23 03:23:03 +00:00
tun_configure(bundle, bundle->ncp.mp.peer_mrru, speed);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
} else
tun_configure(bundle, fsm2lcp(fp)->his_mru,
modem_Speed(link2physical(fp->link)));
} else if (fp->proto == PROTO_IPCP) {
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
bundle_StartIdleTimer(bundle);
Tidy up the parent notification stuff for -background mode. Remove extraneous extern decls of tun_{in,out} and netfd.
1998-03-25 18:38:59 +00:00
bundle_Notify(bundle, EX_NORMAL);
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
static void
bundle_LayerDown(void *v, struct fsm *fp)
{
/*
* The given FSM has been told to come down.
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
* If it's our last NCP, stop the idle timer.
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
* If it's our last NCP *OR* LCP, enter TERMINATE phase.
* If it's an LCP and we're in multilink mode, adjust our tun speed.
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
*/
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
struct bundle *bundle = (struct bundle *)v;
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (fp->proto == PROTO_IPCP) {
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
bundle_StopIdleTimer(bundle);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
} else if (fp->proto == PROTO_LCP) {
int speed, others_active;
struct datalink *dl;
others_active = 0;
for (dl = bundle->links, speed = 0; dl; dl = dl->next)
if (fp != &dl->physical->link.lcp.fsm &&
dl->state != DATALINK_CLOSED && dl->state != DATALINK_HANGUP) {
speed += modem_Speed(dl->physical);
others_active++;
}
if (bundle->ncp.mp.active && speed)
tun_configure(bundle, bundle->ncp.mp.link.lcp.his_mru, speed);
if (!others_active)
bundle_NewPhase(bundle, PHASE_TERMINATE);
}
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
}
static void
bundle_LayerFinish(void *v, struct fsm *fp)
{
/* The given fsm is now down (fp cannot be NULL)
*
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
* If it's the last LCP, fsm_Down all NCPs
* If it's the last NCP, fsm_Close all LCPs
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
*/
struct bundle *bundle = (struct bundle *)v;
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
struct datalink *dl;
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
o Don't immediately reply to the first LQR thinking it's a duplicate ('cos it compares with our initial values). o Move the LCP into struct datalink.
1998-03-13 21:07:14 +00:00
if (fp->proto == PROTO_IPCP) {
o FsmDown() and FsmClose() any NCP that's still around before going into phase DEAD when the last physical link disappears. o Don't go to phase TERMINATE if we're already phase DEAD.
1998-04-16 21:19:05 +00:00
if (bundle_Phase(bundle) != PHASE_DEAD)
bundle_NewPhase(bundle, PHASE_TERMINATE);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
for (dl = bundle->links; dl; dl = dl->next)
datalink_Close(dl, 0);
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
fsm_Down(fp);
fsm_Close(fp);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
} else if (fp->proto == PROTO_LCP) {
int others_active;
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
others_active = 0;
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
for (dl = bundle->links; dl; dl = dl->next)
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (fp != &dl->physical->link.lcp.fsm &&
dl->state != DATALINK_CLOSED && dl->state != DATALINK_HANGUP)
others_active++;
o Don't immediately reply to the first LQR thinking it's a duplicate ('cos it compares with our initial values). o Move the LCP into struct datalink.
1998-03-13 21:07:14 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (!others_active) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
fsm_Down(&bundle->ncp.ipcp.fsm);
fsm_Close(&bundle->ncp.ipcp.fsm); /* ST_INITIAL please */
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
}
}
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
int
bundle_LinkIsUp(const struct bundle *bundle)
{
Move the IPCP into struct bundle.
1998-03-13 21:07:46 +00:00
return bundle->ncp.ipcp.fsm.state == ST_OPENED;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
void
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
bundle_Close(struct bundle *bundle, const char *name, int staydown)
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
{
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
/*
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
* Please close the given datalink.
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
* If name == NULL or name is the last datalink, fsm_Close all NCPs
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
* (except our MP)
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
* If it isn't the last datalink, just Close that datalink.
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
*/
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
struct datalink *dl, *this_dl;
int others_active;
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (bundle->phase == PHASE_TERMINATE || bundle->phase == PHASE_DEAD)
return;
others_active = 0;
this_dl = NULL;
for (dl = bundle->links; dl; dl = dl->next) {
if (name && !strcasecmp(name, dl->name))
this_dl = dl;
if (name == NULL || this_dl == dl) {
if (staydown)
Close the link(s) properly from bundle_Close() even if we're in PHASE_DEAD already. Don't modem_Raw() 'till we're in packet mode.
1998-02-18 00:27:49 +00:00
datalink_StayDown(dl);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
} else if (dl->state != DATALINK_CLOSED && dl->state != DATALINK_HANGUP)
others_active++;
}
if (name && this_dl == NULL) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogWARN, "%s: Invalid datalink name\n", name);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
return;
}
if (!others_active) {
if (bundle->ncp.ipcp.fsm.state > ST_CLOSED ||
bundle->ncp.ipcp.fsm.state == ST_STARTING)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
fsm_Close(&bundle->ncp.ipcp.fsm);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
else {
if (bundle->ncp.ipcp.fsm.state > ST_INITIAL) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
fsm_Close(&bundle->ncp.ipcp.fsm);
fsm_Down(&bundle->ncp.ipcp.fsm);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
}
for (dl = bundle->links; dl; dl = dl->next)
datalink_Close(dl, staydown);
Force IPCP back to initial in bundle_Close(). Add a few un-necessary includes to make us build under 2.2.5. These'll go when the code is cleaned up at the end.
1998-03-02 17:25:30 +00:00
}
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
} else if (this_dl && this_dl->state != DATALINK_CLOSED &&
this_dl->state != DATALINK_HANGUP)
datalink_Close(this_dl, staydown);
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
static int
bundle_UpdateSet(struct descriptor *d, fd_set *r, fd_set *w, fd_set *e, int *n)
{
struct bundle *bundle = descriptor2bundle(d);
struct datalink *dl;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
struct descriptor *desc;
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
int result;
result = 0;
for (dl = bundle->links; dl; dl = dl->next)
result += descriptor_UpdateSet(&dl->desc, r, w, e, n);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
for (desc = bundle->desc.next; desc; desc = desc->next)
result += descriptor_UpdateSet(desc, r, w, e, n);
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
return result;
}
static int
bundle_IsSet(struct descriptor *d, const fd_set *fdset)
{
struct bundle *bundle = descriptor2bundle(d);
struct datalink *dl;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
struct descriptor *desc;
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
for (dl = bundle->links; dl; dl = dl->next)
if (descriptor_IsSet(&dl->desc, fdset))
return 1;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
for (desc = bundle->desc.next; desc; desc = desc->next)
if (descriptor_IsSet(desc, fdset))
return 1;
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
return 0;
}
static void
bundle_DescriptorRead(struct descriptor *d, struct bundle *bundle,
const fd_set *fdset)
{
struct datalink *dl;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
struct descriptor *desc;
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
for (dl = bundle->links; dl; dl = dl->next)
if (descriptor_IsSet(&dl->desc, fdset))
descriptor_Read(&dl->desc, bundle, fdset);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
for (desc = bundle->desc.next; desc; desc = desc->next)
if (descriptor_IsSet(desc, fdset))
descriptor_Read(desc, bundle, fdset);
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
}
static void
bundle_DescriptorWrite(struct descriptor *d, struct bundle *bundle,
const fd_set *fdset)
{
struct datalink *dl;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
struct descriptor *desc;
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
for (dl = bundle->links; dl; dl = dl->next)
if (descriptor_IsSet(&dl->desc, fdset))
descriptor_Write(&dl->desc, bundle, fdset);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
for (desc = bundle->desc.next; desc; desc = desc->next)
if (descriptor_IsSet(desc, fdset))
descriptor_Write(desc, bundle, fdset);
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
struct bundle *
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
bundle_Create(const char *prefix, struct prompt *prompt, int type)
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
{
int s, enoentcount, err;
struct ifreq ifrq;
static struct bundle bundle; /* there can be only one */
if (bundle.ifname != NULL) { /* Already allocated ! */
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_Create: There's only one BUNDLE !\n");
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
return NULL;
}
err = ENOENT;
enoentcount = 0;
o Don't limit our tun device number to 256. As long as there's another /dev/ entry, keep trying to open them. o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
for (bundle.unit = 0; ; bundle.unit++) {
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
snprintf(bundle.dev, sizeof bundle.dev, "%s%d", prefix, bundle.unit);
bundle.tun_fd = ID0open(bundle.dev, O_RDWR);
if (bundle.tun_fd >= 0)
break;
o Don't limit our tun device number to 256. As long as there's another /dev/ entry, keep trying to open them. o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
else if (errno == ENXIO) {
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
err = errno;
o Don't limit our tun device number to 256. As long as there's another /dev/ entry, keep trying to open them. o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
break;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
} else if (errno == ENOENT) {
if (++enoentcount > 2)
o Don't limit our tun device number to 256. As long as there's another /dev/ entry, keep trying to open them. o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
break;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
} else
err = errno;
}
o Don't limit our tun device number to 256. As long as there's another /dev/ entry, keep trying to open them. o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
if (bundle.tun_fd < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogWARN, "No available tunnel devices found (%s).\n",
o Don't limit our tun device number to 256. As long as there's another /dev/ entry, keep trying to open them. o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
strerror(err));
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
return NULL;
}
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_SetTun(bundle.unit);
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
s = socket(AF_INET, SOCK_DGRAM, 0);
if (s < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_Create: socket(): %s\n", strerror(errno));
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
close(bundle.tun_fd);
return NULL;
}
bundle.ifname = strrchr(bundle.dev, '/');
if (bundle.ifname == NULL)
bundle.ifname = bundle.dev;
else
bundle.ifname++;
/*
* Now, bring up the interface.
*/
memset(&ifrq, '\0', sizeof ifrq);
strncpy(ifrq.ifr_name, bundle.ifname, sizeof ifrq.ifr_name - 1);
ifrq.ifr_name[sizeof ifrq.ifr_name - 1] = '\0';
if (ID0ioctl(s, SIOCGIFFLAGS, &ifrq) < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "OpenTunnel: ioctl(SIOCGIFFLAGS): %s\n",
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
strerror(errno));
close(s);
close(bundle.tun_fd);
bundle.ifname = NULL;
return NULL;
}
ifrq.ifr_flags |= IFF_UP;
if (ID0ioctl(s, SIOCSIFFLAGS, &ifrq) < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "OpenTunnel: ioctl(SIOCSIFFLAGS): %s\n",
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
strerror(errno));
close(s);
close(bundle.tun_fd);
bundle.ifname = NULL;
return NULL;
}
close(s);
if ((bundle.ifIndex = GetIfIndex(bundle.ifname)) < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "OpenTunnel: Can't find ifindex.\n");
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
close(bundle.tun_fd);
bundle.ifname = NULL;
return NULL;
}
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
prompt_Printf(prompt, "Using interface: %s\n", bundle.ifname);
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "Using interface: %s\n", bundle.ifname);
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
Bring the routing seqno into struct bundle.
1998-02-02 19:33:02 +00:00
bundle.routing_seq = 0;
Move `CleaningUp' into struct bundle.
1998-03-16 22:53:15 +00:00
bundle.phase = PHASE_DEAD;
bundle.CleaningUp = 0;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
bundle.fsm.LayerStart = bundle_LayerStart;
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
bundle.fsm.LayerUp = bundle_LayerUp;
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
bundle.fsm.LayerDown = bundle_LayerDown;
bundle.fsm.LayerFinish = bundle_LayerFinish;
bundle.fsm.object = &bundle;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
bundle.cfg.idle_timeout = NCP_IDLE_TIMEOUT;
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
*bundle.cfg.auth.name = '\0';
*bundle.cfg.auth.key = '\0';
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
bundle.cfg.opt = OPT_SROUTES | OPT_IDCHECK | OPT_LOOPBACK |
OPT_THROUGHPUT | OPT_UTMP;
Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply multilink ('cos I've seen my ISP REQ it without multilink). Setting MRRU is ifdef'd out until it's debugged and we can merge -direct links with other running programs. Fix MTU setting.
1998-04-23 03:23:03 +00:00
*bundle.cfg.label = '\0';
bundle.cfg.mtu = DEF_MTU;
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
bundle.phys_type = type;
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
bundle.links = datalink_Create("deflink", &bundle, type);
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
if (bundle.links == NULL) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "Cannot create data link: %s\n", strerror(errno));
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
close(bundle.tun_fd);
bundle.ifname = NULL;
Move pppVars.physical into the bundle (for the moment).
1998-02-06 02:23:48 +00:00
return NULL;
}
Make struct bundle into a sort of `struct descriptor'. It does the fdsets/reads/writes for each of it's datalinks.
1998-03-20 19:48:28 +00:00
bundle.desc.type = BUNDLE_DESCRIPTOR;
bundle.desc.next = NULL;
bundle.desc.UpdateSet = bundle_UpdateSet;
bundle.desc.IsSet = bundle_IsSet;
bundle.desc.Read = bundle_DescriptorRead;
bundle.desc.Write = bundle_DescriptorWrite;
Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply multilink ('cos I've seen my ISP REQ it without multilink). Setting MRRU is ifdef'd out until it's debugged and we can merge -direct links with other running programs. Fix MTU setting.
1998-04-23 03:23:03 +00:00
mp_Init(&bundle.ncp.mp, &bundle);
/* Send over the first physical link by default */
Move the IPCP into struct bundle.
1998-03-13 21:07:46 +00:00
ipcp_Init(&bundle.ncp.ipcp, &bundle, &bundle.links->physical->link,
&bundle.fsm);
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
Move filter sets into struct bundle.
1998-03-16 22:52:54 +00:00
memset(&bundle.filter, '\0', sizeof bundle.filter);
bundle.filter.in.fragok = bundle.filter.in.logok = 1;
bundle.filter.in.name = "IN";
bundle.filter.out.fragok = bundle.filter.out.logok = 1;
bundle.filter.out.name = "OUT";
bundle.filter.dial.name = "DIAL";
o Drop packets that fail the dial filter when we're in phase DEAD. They'll almost definitely have timed out by the time we dial anyway. o Log dial filters again (LogTCPIP). o Make DEBUG diagnostics for filter checking actually mean something to the common observer. o Do our best to keep any already-configured IP numbers at IPCP negotiation time. We always first request our configured IP, and if the peer asks for an invalid IP, we NAK with HISADDR Cosmetic: o Add a linefeed to the `set timeout' arg count error message. o Log unacceptable address errors to LogPHASE if LogIPCP is switched off. o Fix ``destination system not found'' error message. o Get out immediately if we get a fatal error before entering the main loop.
1998-04-03 19:25:07 +00:00
bundle.filter.dial.logok = 1;
Move filter sets into struct bundle.
1998-03-16 22:52:54 +00:00
bundle.filter.alive.name = "ALIVE";
bundle.filter.alive.logok = 1;
Display the correct amount of remaining time in `show time'.
1998-03-18 23:15:31 +00:00
memset(&bundle.idle.timer, '\0', sizeof bundle.idle.timer);
bundle.idle.done = 0;
Tidy up the parent notification stuff for -background mode. Remove extraneous extern decls of tun_{in,out} and netfd.
1998-03-25 18:38:59 +00:00
bundle.notify.fd = -1;
Display the correct amount of remaining time in `show time'.
1998-03-18 23:15:31 +00:00
Create struct fsm_parent. FSMs are created with one of these, and the FSM passes subsequent events to them. The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
/* Clean out any leftover crud */
bundle_CleanInterface(&bundle);
Remove MODE_ALIAS and add AliasEnabled() macro. Remove IsInteractive().
1998-04-07 23:46:09 +00:00
if (prompt) {
/* Retrospectively introduce ourselves to the prompt */
prompt->bundle = &bundle;
bundle_RegisterDescriptor(&bundle, &prompt->desc);
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
return &bundle;
}
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
static void
bundle_DownInterface(struct bundle *bundle)
{
struct ifreq ifrq;
int s;
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
route_IfDelete(bundle, 1);
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
s = ID0socket(AF_INET, SOCK_DGRAM, 0);
if (s < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_DownInterface: socket: %s\n", strerror(errno));
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
return;
}
memset(&ifrq, '\0', sizeof ifrq);
strncpy(ifrq.ifr_name, bundle->ifname, sizeof ifrq.ifr_name - 1);
ifrq.ifr_name[sizeof ifrq.ifr_name - 1] = '\0';
if (ID0ioctl(s, SIOCGIFFLAGS, &ifrq) < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_DownInterface: ioctl(SIOCGIFFLAGS): %s\n",
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
strerror(errno));
close(s);
return;
}
ifrq.ifr_flags &= ~IFF_UP;
if (ID0ioctl(s, SIOCSIFFLAGS, &ifrq) < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_DownInterface: ioctl(SIOCSIFFLAGS): %s\n",
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
strerror(errno));
close(s);
return;
}
close(s);
}
void
bundle_Destroy(struct bundle *bundle)
{
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
struct datalink *dl;
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
struct descriptor *desc, *ndesc;
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
if (bundle->phys_type & PHYS_DEMAND) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
ipcp_CleanInterface(&bundle->ncp.ipcp);
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
bundle_DownInterface(bundle);
}
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
dl = bundle->links;
while (dl)
dl = datalink_Destroy(dl);
Tidy up the parent notification stuff for -background mode. Remove extraneous extern decls of tun_{in,out} and netfd.
1998-03-25 18:38:59 +00:00
bundle_Notify(bundle, EX_ERRDEAD);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
desc = bundle->desc.next;
while (desc) {
ndesc = desc->next;
if (desc->type == PROMPT_DESCRIPTOR)
prompt_Destroy((struct prompt *)desc, 1);
else
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_Destroy: Don't know how to delete descriptor"
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
" type %d\n", desc->type);
desc = ndesc;
}
bundle->desc.next = NULL;
o Add bundle_Destroy(). o Don't remove routes and DOWN the interface when we're closed in auto mode. o Initialize the FSMs in bundle_Create. o Initialize ipcp::if_mine & ipcp::if_peer only once (so that we don't forget that we've SIOCAIFADDR'd the interface). o Do a SIOCDIFADDR on the specific address to avoid hurting any other (still non-existent) NCPs. o Fix some error/diagnostic messages.
1998-02-08 19:29:45 +00:00
bundle->ifname = NULL;
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
struct rtmsg {
struct rt_msghdr m_rtm;
char m_space[64];
};
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
int
Bring the routing seqno into struct bundle.
1998-02-02 19:33:02 +00:00
bundle_SetRoute(struct bundle *bundle, int cmd, struct in_addr dst,
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
struct in_addr gateway, struct in_addr mask, int bang)
{
struct rtmsg rtmes;
int s, nb, wb;
char *cp;
const char *cmdstr;
struct sockaddr_in rtdata;
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
int result = 1;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
if (bang)
cmdstr = (cmd == RTM_ADD ? "Add!" : "Delete!");
else
cmdstr = (cmd == RTM_ADD ? "Add" : "Delete");
s = ID0socket(PF_ROUTE, SOCK_RAW, 0);
if (s < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogERROR, "bundle_SetRoute: socket(): %s\n", strerror(errno));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
return result;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
memset(&rtmes, '\0', sizeof rtmes);
rtmes.m_rtm.rtm_version = RTM_VERSION;
rtmes.m_rtm.rtm_type = cmd;
rtmes.m_rtm.rtm_addrs = RTA_DST;
Bring the routing seqno into struct bundle.
1998-02-02 19:33:02 +00:00
rtmes.m_rtm.rtm_seq = ++bundle->routing_seq;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
rtmes.m_rtm.rtm_pid = getpid();
rtmes.m_rtm.rtm_flags = RTF_UP | RTF_GATEWAY | RTF_STATIC;
memset(&rtdata, '\0', sizeof rtdata);
Fix the worst sort of bug - a SEGV in a diagnostic ! Also, use sizeof sockaddr_in instead of 16 when writing to the routing socket.
1998-04-16 23:06:53 +00:00
rtdata.sin_len = sizeof rtdata;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
rtdata.sin_family = AF_INET;
rtdata.sin_port = 0;
rtdata.sin_addr = dst;
cp = rtmes.m_space;
Fix the worst sort of bug - a SEGV in a diagnostic ! Also, use sizeof sockaddr_in instead of 16 when writing to the routing socket.
1998-04-16 23:06:53 +00:00
memcpy(cp, &rtdata, rtdata.sin_len);
cp += rtdata.sin_len;
Make gcc-2.8.1 build ppp cleanly. Support OpenBSD again.
1998-04-25 10:49:52 +00:00
if (cmd == RTM_ADD) {
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
if (gateway.s_addr == INADDR_ANY) {
/* Add a route through the interface */
struct sockaddr_dl dl;
const char *iname;
int ilen;
iname = Index2Nam(bundle->ifIndex);
ilen = strlen(iname);
dl.sdl_len = sizeof dl - sizeof dl.sdl_data + ilen;
dl.sdl_family = AF_LINK;
dl.sdl_index = bundle->ifIndex;
dl.sdl_type = 0;
dl.sdl_nlen = ilen;
dl.sdl_alen = 0;
dl.sdl_slen = 0;
strncpy(dl.sdl_data, iname, sizeof dl.sdl_data);
memcpy(cp, &dl, dl.sdl_len);
cp += dl.sdl_len;
rtmes.m_rtm.rtm_addrs |= RTA_GATEWAY;
} else {
rtdata.sin_addr = gateway;
Fix the worst sort of bug - a SEGV in a diagnostic ! Also, use sizeof sockaddr_in instead of 16 when writing to the routing socket.
1998-04-16 23:06:53 +00:00
memcpy(cp, &rtdata, rtdata.sin_len);
cp += rtdata.sin_len;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
rtmes.m_rtm.rtm_addrs |= RTA_GATEWAY;
}
Make gcc-2.8.1 build ppp cleanly. Support OpenBSD again.
1998-04-25 10:49:52 +00:00
}
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
if (dst.s_addr == INADDR_ANY)
mask.s_addr = INADDR_ANY;
if (cmd == RTM_ADD || dst.s_addr == INADDR_ANY) {
rtdata.sin_addr = mask;
Fix the worst sort of bug - a SEGV in a diagnostic ! Also, use sizeof sockaddr_in instead of 16 when writing to the routing socket.
1998-04-16 23:06:53 +00:00
memcpy(cp, &rtdata, rtdata.sin_len);
cp += rtdata.sin_len;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
rtmes.m_rtm.rtm_addrs |= RTA_NETMASK;
}
nb = cp - (char *) &rtmes;
rtmes.m_rtm.rtm_msglen = nb;
wb = ID0write(s, &rtmes, nb);
if (wb < 0) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogTCPIP, "bundle_SetRoute failure:\n");
log_Printf(LogTCPIP, "bundle_SetRoute: Cmd = %s\n", cmdstr);
log_Printf(LogTCPIP, "bundle_SetRoute: Dst = %s\n", inet_ntoa(dst));
log_Printf(LogTCPIP, "bundle_SetRoute: Gateway = %s\n", inet_ntoa(gateway));
log_Printf(LogTCPIP, "bundle_SetRoute: Mask = %s\n", inet_ntoa(mask));
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
failed:
if (cmd == RTM_ADD && (rtmes.m_rtm.rtm_errno == EEXIST ||
Make gcc-2.8.1 build ppp cleanly. Support OpenBSD again.
1998-04-25 10:49:52 +00:00
(rtmes.m_rtm.rtm_errno == 0 && errno == EEXIST))) {
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
if (!bang) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogWARN, "Add route failed: %s already exists\n",
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
inet_ntoa(dst));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
result = 0; /* Don't add to our dynamic list */
} else {
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
rtmes.m_rtm.rtm_type = cmd = RTM_CHANGE;
if ((wb = ID0write(s, &rtmes, nb)) < 0)
goto failed;
}
Make gcc-2.8.1 build ppp cleanly. Support OpenBSD again.
1998-04-25 10:49:52 +00:00
} else if (cmd == RTM_DELETE &&
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
(rtmes.m_rtm.rtm_errno == ESRCH ||
(rtmes.m_rtm.rtm_errno == 0 && errno == ESRCH))) {
if (!bang)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogWARN, "Del route failed: %s: Non-existent\n",
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
inet_ntoa(dst));
} else if (rtmes.m_rtm.rtm_errno == 0)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogWARN, "%s route failed: %s: errno: %s\n", cmdstr,
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
inet_ntoa(dst), strerror(errno));
else
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogWARN, "%s route failed: %s: %s\n",
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
cmdstr, inet_ntoa(dst), strerror(rtmes.m_rtm.rtm_errno));
}
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogDEBUG, "wrote %d: cmd = %s, dst = %x, gateway = %x\n",
o Use __attribute__ (#ifdef __GNUC__) to type-check LogPrintf() and prompt_Printf(), and fix the bits identified as being wrong as a result.
1998-04-19 23:09:03 +00:00
wb, cmdstr, (unsigned)dst.s_addr, (unsigned)gateway.s_addr);
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
close(s);
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
return result;
Create `struct bundle' - the top level control structure. This structure will eventually contain a list of NCPs (currently only IPCP is supported) and a list of physical `struct link's. It will also derive from a struct link itself. Make ModemTimeout() static - it's way to dangerous to be called from outside ! Bump version to 1.9. Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
}
Isolate fsm callback functions Derive {lcp,ipcp,ccp}state structures from struct fsm where convenient. Create bundle_Down() and remove LcpDown()
1998-02-06 02:24:29 +00:00
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
void
bundle_LinkClosed(struct bundle *bundle, struct datalink *dl)
{
/*
* Our datalink has closed.
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
* UpdateSet() will remove 1OFF and STDIN links.
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
* If it's the last data link, enter phase DEAD.
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
*/
Move the dial, login and hangup scripts into struct datalink. Don't set these scripts in -direct mode. Always set reconnect_tries to zero for -direct mode.
1998-02-16 19:10:03 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
struct datalink *odl;
int other_links;
Move the dial, login and hangup scripts into struct datalink. Don't set these scripts in -direct mode. Always set reconnect_tries to zero for -direct mode.
1998-02-16 19:10:03 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
other_links = 0;
for (odl = bundle->links; odl; odl = odl->next)
if (odl != dl && odl->state != DATALINK_CLOSED)
other_links++;
Sort out (fix) the `term' command. datalink_Up() can now be told to skip the dial/login/hangup scripts and can be told whether to enter packet mode when entering the DATALINK_OPENED state.
1998-02-17 01:05:47 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (!other_links) {
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
if (dl->physical->type != PHYS_DEMAND)
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
bundle_DownInterface(bundle);
o FsmDown() and FsmClose() any NCP that's still around before going into phase DEAD when the last physical link disappears. o Don't go to phase TERMINATE if we're already phase DEAD.
1998-04-16 21:19:05 +00:00
if (bundle->ncp.ipcp.fsm.state > ST_CLOSED ||
bundle->ncp.ipcp.fsm.state == ST_STARTING) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
fsm_Down(&bundle->ncp.ipcp.fsm);
fsm_Close(&bundle->ncp.ipcp.fsm); /* ST_INITIAL please */
o FsmDown() and FsmClose() any NCP that's still around before going into phase DEAD when the last physical link disappears. o Don't go to phase TERMINATE if we're already phase DEAD.
1998-04-16 21:19:05 +00:00
}
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
bundle_NewPhase(bundle, PHASE_DEAD);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
bundle_DisplayPrompt(bundle);
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
}
o Hook the FSMs into our bundle. o The FSM layering is now more sane. o Move a lot of the NCP stuff into our ipcpstate rather than having it in the bundle, including control of the configured IP addresses. We don't need hacks like the global `linkup' variable any more as the FSM decides when our ppp.link* files get run. This is going to eventually be configurable based on FSM events anyway. o Fix a few inconsistencies when both sides require authentication. o We now have "Ppp..." and "PPp" prompts, reflecting authentication and network phase. We don't print loads of spurious prompts as we change phases any more. o Our phase is part of the bundle now. o Fix a bug where the FSM wasn't calling LayerFinish. o Close the FSM down correctly with a signal rather than slamming it down as if the line was dropped (the undocumented ``down'' command is still available though). o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
}
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
void
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
bundle_Open(struct bundle *bundle, const char *name, int mask)
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
{
/*
* Please open the given datalink, or all if name == NULL
*/
struct datalink *dl;
for (dl = bundle->links; dl; dl = dl->next)
if (name == NULL || !strcasecmp(dl->name, name)) {
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
if (mask & dl->physical->type)
datalink_Up(dl, 1, 1);
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
if (name != NULL)
break;
}
}
struct datalink *
bundle2datalink(struct bundle *bundle, const char *name)
{
struct datalink *dl;
if (name != NULL) {
for (dl = bundle->links; dl; dl = dl->next)
if (!strcasecmp(dl->name, name))
return dl;
} else if (bundle->links && !bundle->links->next)
return bundle->links;
return NULL;
}
int
bundle_FillQueues(struct bundle *bundle)
{
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
int total;
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
if (bundle->ncp.mp.active) {
total = mp_FillQueues(bundle);
} else {
o Move VarMSChap into struct chap, and remove `set encrypt' option. We never ask a client for MSChap when we've got chap `enabled', and we dynamically answer using MSChap if the peer demands it. o Remove all of the bundle2*() series of functions except bundle2datalink() as they're too expensive. The only calls to bundle2datalink() are made from command.c when determining context. o Write to the correct modem in term mode, and check the return value, dropping back to command mode if the write fails. Cosmetic: Make the PPP COMMAND LIST section of the man page prettier, better and more consistent. Alphabeticalise all command lists and document missing commands.
1998-04-03 19:26:29 +00:00
total = link_QueueLen(&bundle->links->physical->link);
if (total == 0 && bundle->links->physical->out == NULL)
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
total = ip_FlushPacket(&bundle->links->physical->link, bundle);
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
}
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
return total + ip_QueueLen();
Create struct datalink. This is a type of physical link that can chat and talk LCP & CCP. A bundle contains a list of these (only one in the list for the moment). The datalink is a type of descriptor, and dials, enters LCP (& does CCP), kicks the bundle when its FSMs do something interesting and does the hangup chat script on the way down. It also handles redials and reconnects. There are lots of loose ends, and probably lots of bugs, but the data structures are getting there !
1998-02-16 00:01:12 +00:00
}
Introduce the ``link'' command for controlling individual links.
1998-02-17 19:28:01 +00:00
int
bundle_ShowLinks(struct cmdargs const *arg)
{
o Defer setting up pap/chap based IP numbers & labels until after we've determined if we're going to join another ppp invocation. o Make ``show link'' show all link details, and ``show links'' just give a list of links and their current status. o Show our current label in ``show bundle''. o Allow link cloning and removal as soon as our MRRU is set. o Make ``show lcp'' require context as nothing will ever change in our MP LCP (it's auto-configured as per rfc1990). o Initialise our LQM owner in hdlc_Init(). o Store our endpoint discriminator and authentication name at both the datalink and multilink level and compare them when we've finished AUTHENTICATE phase and before entering NETWORK phase. If they don't match, close the link again. Display the information in the appropriate ``show'' command. o Initialise datalink::phone and datalink::fsmp.object properly when we're cloning the link. o Show which link we're passing LQRs on in our diagnostics. o Reject endpoint discriminator REQs at the logical multilink level. o Remove the rest of our CARRIER and LINK logging setup.
1998-04-24 19:16:15 +00:00
struct datalink *dl;
Introduce the ``link'' command for controlling individual links.
1998-02-17 19:28:01 +00:00
o Display current link throughput in `show links' (assuming throughput measurement is enabled). o Load balance the links based on weight *and* on a round-robin basis. This makes things fairly even on an output basis. We don't try to allow for the peer sending all his data down one link (and try to send ours back up the other). o Show the number of pending input buffers that can't be processed in ``show mp''. o Fix a typo in the man page.
1998-05-03 22:13:14 +00:00
for (dl = arg->bundle->links; dl; dl = dl->next) {
prompt_Printf(arg->prompt, "Name: %s [%s]", dl->name, datalink_State(dl));
o Use a tun speed of 115200 for each network link. o Display the link weight in `show links', and only show throughput for open links.
1998-05-05 03:01:32 +00:00
if (dl->physical->link.throughput.rolling && dl->state == DATALINK_OPEN)
prompt_Printf(arg->prompt, " (weight %d, %d bytes/sec)",
dl->mp.weight,
o Display current link throughput in `show links' (assuming throughput measurement is enabled). o Load balance the links based on weight *and* on a round-robin basis. This makes things fairly even on an output basis. We don't try to allow for the peer sending all his data down one link (and try to send ours back up the other). o Show the number of pending input buffers that can't be processed in ``show mp''. o Fix a typo in the man page.
1998-05-03 22:13:14 +00:00
dl->physical->link.throughput.OctetsPerSecond);
prompt_Printf(arg->prompt, "\n");
}
Introduce the ``link'' command for controlling individual links.
1998-02-17 19:28:01 +00:00
return 0;
}
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
static const char *
optval(struct bundle *bundle, int bit)
{
return (bundle->cfg.opt & bit) ? "enabled" : "disabled";
}
Remove ``show timeout'' and ``show auth'' and add ``show bundle''. Mention ``show timer'' in the man page.
1998-04-11 21:50:47 +00:00
int
bundle_ShowStatus(struct cmdargs const *arg)
{
int remaining;
prompt_Printf(arg->prompt, "Phase %s\n", bundle_PhaseName(arg->bundle));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Interface: %s\n", arg->bundle->dev);
Remove ``show timeout'' and ``show auth'' and add ``show bundle''. Mention ``show timer'' in the man page.
1998-04-11 21:50:47 +00:00
prompt_Printf(arg->prompt, "\nDefaults:\n");
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Label: %s\n", arg->bundle->cfg.label);
prompt_Printf(arg->prompt, " Auth name: %s\n",
arg->bundle->cfg.auth.name);
prompt_Printf(arg->prompt, " Idle Timer: ");
Remove ``show timeout'' and ``show auth'' and add ``show bundle''. Mention ``show timer'' in the man page.
1998-04-11 21:50:47 +00:00
if (arg->bundle->cfg.idle_timeout) {
prompt_Printf(arg->prompt, "%ds", arg->bundle->cfg.idle_timeout);
remaining = bundle_RemainingIdleTime(arg->bundle);
if (remaining != -1)
prompt_Printf(arg->prompt, " (%ds remaining)", remaining);
prompt_Printf(arg->prompt, "\n");
} else
prompt_Printf(arg->prompt, "disabled\n");
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " MTU: ");
o Add ipcp_SetLink() for attaching IPCP to the correct link, and call it after link authentication. o Pretty print our bundle MTU. o Correct MP header encoding and decoding (should be network byte order). o Add some debug diagnostics so that we can see MP fragment sending and re-assembly.
1998-04-23 18:56:21 +00:00
if (arg->bundle->cfg.mtu)
prompt_Printf(arg->prompt, "%d\n", arg->bundle->cfg.mtu);
else
prompt_Printf(arg->prompt, "unspecified\n");
Remove ``show timeout'' and ``show auth'' and add ``show bundle''. Mention ``show timer'' in the man page.
1998-04-11 21:50:47 +00:00
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Sticky Routes: %s\n",
optval(arg->bundle, OPT_SROUTES));
prompt_Printf(arg->prompt, " ID check: %s\n",
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
optval(arg->bundle, OPT_IDCHECK));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Loopback: %s\n",
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
optval(arg->bundle, OPT_LOOPBACK));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " PasswdAuth: %s\n",
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
optval(arg->bundle, OPT_PASSWDAUTH));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Proxy: %s\n",
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
optval(arg->bundle, OPT_PROXY));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Throughput: %s\n",
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
optval(arg->bundle, OPT_THROUGHPUT));
Create `struct sticky_route'. Any `add' or `delete' command that uses MYADDR or HISADDR will be added to the sticky route list (show ipcp). When MYADDR or HISADDR change due to IPCP negotiations, and if `sroutes' is enabled (the default), all sticky route entries are updated in the routing table. The end result is that `add default hisaddr' will ``stick'', as will ``add myaddr 255.255.255.255 127.0.0.1'' and ``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
prompt_Printf(arg->prompt, " Utmp Logging: %s\n",
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
optval(arg->bundle, OPT_UTMP));
Remove ``show timeout'' and ``show auth'' and add ``show bundle''. Mention ``show timer'' in the man page.
1998-04-11 21:50:47 +00:00
return 0;
}
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
static void
bundle_IdleTimeout(void *v)
{
struct bundle *bundle = (struct bundle *)v;
Display the correct amount of remaining time in `show time'.
1998-03-18 23:15:31 +00:00
bundle->idle.done = 0;
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "Idle timer expired.\n");
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
bundle_Close(bundle, NULL, 1);
}
/*
* Start Idle timer. If timeout is reached, we call bundle_Close() to
* close LCP and link.
*/
void
bundle_StartIdleTimer(struct bundle *bundle)
{
Stop the idle timer if the timeout is disabled while the timer is active.
1998-04-16 22:11:46 +00:00
if (!(bundle->phys_type & (PHYS_DEDICATED|PHYS_PERM))) {
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
timer_Stop(&bundle->idle.timer);
Stop the idle timer if the timeout is disabled while the timer is active.
1998-04-16 22:11:46 +00:00
if (bundle->cfg.idle_timeout) {
bundle->idle.timer.func = bundle_IdleTimeout;
bundle->idle.timer.name = "idle";
bundle->idle.timer.load = bundle->cfg.idle_timeout * SECTICKS;
bundle->idle.timer.arg = bundle;
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
timer_Start(&bundle->idle.timer);
Stop the idle timer if the timeout is disabled while the timer is active.
1998-04-16 22:11:46 +00:00
bundle->idle.done = time(NULL) + bundle->cfg.idle_timeout;
}
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
}
}
void
bundle_SetIdleTimer(struct bundle *bundle, int value)
{
bundle->cfg.idle_timeout = value;
if (bundle_LinkIsUp(bundle))
bundle_StartIdleTimer(bundle);
}
void
bundle_StopIdleTimer(struct bundle *bundle)
{
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
timer_Stop(&bundle->idle.timer);
Initialise bundle::idle::done when the timer's stopped.
1998-04-07 01:49:24 +00:00
bundle->idle.done = 0;
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
}
int
bundle_RemainingIdleTime(struct bundle *bundle)
{
Display the correct amount of remaining time in `show time'.
1998-03-18 23:15:31 +00:00
if (bundle->idle.done)
return bundle->idle.done - time(NULL);
return -1;
Move the idle timer into struct bundle. There's no link-level idle timer for the moment.
1998-03-09 19:26:41 +00:00
}
o Move struct lcp and struct ccp into struct link. o Remove bundle2lcp(), bundle2ccp() and bundle2link(). They're too resource-hungry and we have `owner pointers' to do their job. o Make our FSM understand LCPs that are always ST_OPENED (with a minimum code that != 1). o Send FSM code rejects for invalid codes. o Make our bundle fsm_parent deal with multiple links. o Make timer diagnostics pretty and allow access via ~t in `term' mode (not just when logging debug) and `show timers'. Only show timers every second in debug mode, otherwise we get too many diagnostics to be useful (we probably still do). Also, don't restrict ~m in term mode to depend on debug logging. o Rationalise our bundles' phases. o Create struct mp (multilink protocol). This is both an NCP and a type of struct link. It feeds off other NCPs for output, passing fragmented packets into the queues of available datalinks. It also gets PROTO_MP input, reassembles the fragments into ppp frames, and passes them back to the HDLC layer that the fragments were passed from. ** It's not yet possible to enter multilink mode :-( ** o Add `set weight' (requires context) for deciding on a links weighting in multilink mode. Weighting is simplistic (and probably badly implemented) for now. o Remove the function pointers in struct link. They ended up only applying to physical links. o Configure our tun device with an MTU equal to the MRU from struct mp's LCP and a speed equal to the sum of our link speeds. o `show {lcp,ccp,proto}' and `set deflate' now have optional context and use ChooseLink() to decide on which `struct link' to use. This allows behaviour as before when in non-multilink mode, and allows access to the MP logical link in multilink mode. o Ignore reconnect and redial values when in -direct mode and when cleaning up. Always redial when in -ddial or -dedicated mode (unless cleaning up). o Tell our links to `staydown' when we close them due to a signal. o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without alarms). o Don't bother strdup()ing our physical link name. o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
int
bundle_IsDead(struct bundle *bundle)
{
return !bundle->links || (bundle->phase == PHASE_DEAD && bundle->CleaningUp);
}
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
void
bundle_RegisterDescriptor(struct bundle *bundle, struct descriptor *d)
{
d->next = bundle->desc.next;
bundle->desc.next = d;
}
void
bundle_UnRegisterDescriptor(struct bundle *bundle, struct descriptor *d)
{
struct descriptor **desc;
for (desc = &bundle->desc.next; *desc; desc = &(*desc)->next)
if (*desc == d) {
*desc = d->next;
break;
}
}
void
bundle_DelPromptDescriptors(struct bundle *bundle, struct server *s)
{
struct descriptor **desc;
struct prompt *p;
desc = &bundle->desc.next;
while (*desc) {
if ((*desc)->type == PROMPT_DESCRIPTOR) {
p = (struct prompt *)*desc;
if (p->owner == s) {
prompt_Destroy(p, 1);
desc = &bundle->desc.next;
continue;
}
}
desc = &(*desc)->next;
}
}
void
bundle_DisplayPrompt(struct bundle *bundle)
{
struct descriptor **desc;
for (desc = &bundle->desc.next; *desc; desc = &(*desc)->next)
if ((*desc)->type == PROMPT_DESCRIPTOR)
prompt_Required((struct prompt *)*desc);
}
void
bundle_WriteTermPrompt(struct bundle *bundle, struct datalink *dl,
const char *data, int len)
{
struct descriptor *desc;
struct prompt *p;
for (desc = bundle->desc.next; desc; desc = desc->next)
if (desc->type == PROMPT_DESCRIPTOR) {
p = (struct prompt *)desc;
if (prompt_IsTermMode(p, dl))
Remove redundant warning. Send decent output to prompts in term mode (missing %).
1998-04-04 13:01:19 +00:00
prompt_Printf(p, "%.*s", len, data);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
}
}
void
bundle_SetTtyCommandMode(struct bundle *bundle, struct datalink *dl)
{
struct descriptor *desc;
struct prompt *p;
for (desc = bundle->desc.next; desc; desc = desc->next)
if (desc->type == PROMPT_DESCRIPTOR) {
p = (struct prompt *)desc;
if (prompt_IsTermMode(p, dl))
prompt_TtyCommandMode(p);
}
}
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
static void
bundle_GenPhysType(struct bundle *bundle)
{
struct datalink *dl;
bundle->phys_type = 0;
for (dl = bundle->links; dl; dl = dl->next)
bundle->phys_type |= dl->physical->type;
}
Add the `clone' and `remove' commands for creating and destroying links.
1998-04-05 22:48:25 +00:00
void
bundle_DatalinkClone(struct bundle *bundle, struct datalink *dl,
const char *name)
{
struct datalink *ndl = datalink_Clone(dl, name);
ndl->next = dl->next;
dl->next = ndl;
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
bundle_GenPhysType(bundle);
Add the `clone' and `remove' commands for creating and destroying links.
1998-04-05 22:48:25 +00:00
}
void
bundle_DatalinkRemove(struct bundle *bundle, struct datalink *dl)
{
struct datalink **dlp;
if (dl->state == DATALINK_CLOSED)
for (dlp = &bundle->links; *dlp; dlp = &(*dlp)->next)
if (*dlp == dl) {
*dlp = datalink_Destroy(dl);
break;
}
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
bundle_GenPhysType(bundle);
}
void
bundle_CleanDatalinks(struct bundle *bundle)
{
struct datalink **dlp = &bundle->links;
while (*dlp)
if ((*dlp)->state == DATALINK_CLOSED &&
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
(*dlp)->physical->type & (PHYS_DIRECT|PHYS_1OFF))
o Remove the `mode' global - it's now per physical device. o Shuffle things that live at the datalink level into ``show link'' rather than ``show modem''. o Make both ``show'' commands prettier and more consistent, and display carrier status, link type and our name in ``show modem''. o Show redial and reconnect information in ``show link'' and remove ``show redial'' and ``show reconnect''. o Down the correct link in bundle_LinkLost(). o Remove stale -direct and -background links at the end of our main loop, not when we know they're going. This prevents unexpected pointer-invalidations... o If we ``set server'' with the same values twice, notice and don't moan about failure. o Record dial script despite our link mode. The mode may be changed later (next mod) :-) We never run scripts in -direct and -dedicated modes. o Make ``set server none'' functional again. o Correct datalink state array so that we don't report an ``unknown'' state. o Pass struct ipcp to IpcpCleanInterface, not struct fsm. o Create TUN_PREFIX define rather than hard-coding in main.c o prompt_TtyInit now handles a NULL prompt for -direct mode rather than having to create one then destroy it uncleanly. o Mention our mode in the "PPP Started" LogPHASE message. o Bring all auto links up when we have something to send. o Remove some redundant Physical_*() functions. o Show which connection is running a command when logging commands. o Initialise throughput uptime correctly.
1998-04-10 13:19:23 +00:00
*dlp = datalink_Destroy(*dlp);
else
dlp = &(*dlp)->next;
bundle_GenPhysType(bundle);
Add the `clone' and `remove' commands for creating and destroying links.
1998-04-05 22:48:25 +00:00
}
Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply multilink ('cos I've seen my ISP REQ it without multilink). Setting MRRU is ifdef'd out until it's debugged and we can merge -direct links with other running programs. Fix MTU setting.
1998-04-23 03:23:03 +00:00
void
bundle_SetLabel(struct bundle *bundle, const char *label)
{
if (label)
strncpy(bundle->cfg.label, label, sizeof bundle->cfg.label - 1);
else
*bundle->cfg.label = '\0';
}
const char *
bundle_GetLabel(struct bundle *bundle)
{
return *bundle->cfg.label ? bundle->cfg.label : NULL;
}
o Add the link name to modem diagnostics. o Create struct mpserver as part of struct mp. mpserver creates a unix-domain socket based on the peers auth name and endpoint discriminator. If it already exists, ppp will ``pass the link'' over to the owner of the socket, joining it into the bundle of another ppp invocation, otherwise ppp waits for other invocations to pass it links through this socket. The final piece of code will be the code that flattens our datalink info and passes it down this channel (not yet implemented).
1998-04-28 01:25:46 +00:00
void
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
bundle_ReceiveDatalink(struct bundle *bundle, int s, struct sockaddr_un *sun)
o Add the link name to modem diagnostics. o Create struct mpserver as part of struct mp. mpserver creates a unix-domain socket based on the peers auth name and endpoint discriminator. If it already exists, ppp will ``pass the link'' over to the owner of the socket, joining it into the bundle of another ppp invocation, otherwise ppp waits for other invocations to pass it links through this socket. The final piece of code will be the code that flattens our datalink info and passes it down this channel (not yet implemented).
1998-04-28 01:25:46 +00:00
{
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
char cmsgbuf[sizeof(struct cmsghdr) + sizeof(int)];
struct cmsghdr *cmsg = (struct cmsghdr *)cmsgbuf;
struct msghdr msg;
struct iovec iov[SCATTER_SEGMENTS];
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
struct datalink *dl, *ndl;
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
int niov, link_fd, expect, f;
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "Receiving datalink\n");
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
/* Create our scatter/gather array */
niov = 1;
iov[0].iov_len = strlen(Version) + 1;
iov[0].iov_base = (char *)malloc(iov[0].iov_len);
if (datalink2iov(NULL, iov, &niov, sizeof iov / sizeof *iov) == -1)
return;
for (f = expect = 0; f < niov; f++)
expect += iov[f].iov_len;
/* Set up our message */
cmsg->cmsg_len = sizeof cmsgbuf;
cmsg->cmsg_level = SOL_SOCKET;
cmsg->cmsg_type = SCM_RIGHTS;
memset(&msg, '\0', sizeof msg);
msg.msg_name = (caddr_t)sun;
msg.msg_namelen = sizeof *sun;
msg.msg_iov = iov;
msg.msg_iovlen = niov;
msg.msg_control = cmsgbuf;
msg.msg_controllen = sizeof cmsgbuf;
log_Printf(LogDEBUG, "Expecting %d scatter/gather bytes\n", expect);
f = expect + 100;
setsockopt(s, SOL_SOCKET, SO_RCVBUF, &f, sizeof f);
if ((f = recvmsg(s, &msg, MSG_WAITALL)) != expect) {
if (f == -1)
log_Printf(LogERROR, "Failed recvmsg: %s\n", strerror(errno));
else
log_Printf(LogERROR, "Failed recvmsg: Got %d, not %d\n", f, expect);
while (niov--)
free(iov[niov].iov_base);
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
return;
}
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
/* We've successfully received an open file descriptor through our socket */
link_fd = *(int *)CMSG_DATA(cmsg);
if (strncmp(Version, iov[0].iov_base, iov[0].iov_len)) {
log_Printf(LogWARN, "Cannot receive datalink, incorrect version"
" (\"%.*s\", not \"%s\")\n", (int)iov[0].iov_len,
iov[0].iov_base, Version);
close(link_fd);
while (niov--)
free(iov[niov].iov_base);
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
return;
}
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
niov = 1;
ndl = iov2datalink(bundle, iov, &niov, sizeof iov / sizeof *iov, link_fd);
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
if (ndl) {
/* Make sure the name is unique ! */
do {
for (dl = bundle->links; dl; dl = dl->next)
if (!strcasecmp(ndl->name, dl->name)) {
datalink_Rename(ndl);
break;
}
} while (dl);
ndl->next = bundle->links;
bundle->links = ndl;
bundle_GenPhysType(bundle);
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "%s: Created in %s state\n",
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
ndl->name, datalink_State(ndl));
datalink_AuthOk(ndl);
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
} else
close(link_fd);
free(iov[0].iov_base);
o Add the link name to modem diagnostics. o Create struct mpserver as part of struct mp. mpserver creates a unix-domain socket based on the peers auth name and endpoint discriminator. If it already exists, ppp will ``pass the link'' over to the owner of the socket, joining it into the bundle of another ppp invocation, otherwise ppp waits for other invocations to pass it links through this socket. The final piece of code will be the code that flattens our datalink info and passes it down this channel (not yet implemented).
1998-04-28 01:25:46 +00:00
}
void
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
bundle_SendDatalink(struct datalink *dl, int s, struct sockaddr_un *sun)
o Add the link name to modem diagnostics. o Create struct mpserver as part of struct mp. mpserver creates a unix-domain socket based on the peers auth name and endpoint discriminator. If it already exists, ppp will ``pass the link'' over to the owner of the socket, joining it into the bundle of another ppp invocation, otherwise ppp waits for other invocations to pass it links through this socket. The final piece of code will be the code that flattens our datalink info and passes it down this channel (not yet implemented).
1998-04-28 01:25:46 +00:00
{
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
char cmsgbuf[sizeof(struct cmsghdr) + sizeof(int)]; /* pass ppp_fd */
struct cmsghdr *cmsg = (struct cmsghdr *)cmsgbuf;
struct msghdr msg;
struct iovec iov[SCATTER_SEGMENTS];
int niov, link_fd, f, expect;
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
struct datalink **pdl;
struct bundle *bundle = dl->bundle;
Cosmetic: Make our external function names consistent.
1998-05-01 19:26:12 +00:00
log_Printf(LogPHASE, "Transmitting datalink %s\n", dl->name);
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
/* First, un-hook the datalink */
for (pdl = &bundle->links; *pdl; pdl = &(*pdl)->next)
if (*pdl == dl) {
*pdl = dl->next;
dl->next = NULL;
break;
}
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
/* Build our scatter/gather array */
iov[0].iov_len = strlen(Version) + 1;
iov[0].iov_base = strdup(Version);
niov = 1;
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
link_fd = datalink2iov(dl, iov, &niov, sizeof iov / sizeof *iov);
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
if (link_fd != -1) {
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
cmsg->cmsg_len = sizeof cmsgbuf;
cmsg->cmsg_level = SOL_SOCKET;
cmsg->cmsg_type = SCM_RIGHTS;
*(int *)CMSG_DATA(cmsg) = link_fd;
memset(&msg, '\0', sizeof msg);
msg.msg_name = (caddr_t)sun;
msg.msg_namelen = sizeof *sun;
msg.msg_iov = iov;
msg.msg_iovlen = niov;
msg.msg_control = cmsgbuf;
msg.msg_controllen = sizeof cmsgbuf;
for (f = expect = 0; f < niov; f++)
expect += iov[f].iov_len;
log_Printf(LogDEBUG, "Sending %d bytes in scatter/gather array\n", expect);
f = expect + SOCKET_OVERHEAD;
setsockopt(s, SOL_SOCKET, SO_SNDBUF, &f, sizeof f);
if (sendmsg(s, &msg, 0) == -1)
log_Printf(LogERROR, "Failed sendmsg: %s\n", strerror(errno));
close(link_fd);
o Create a new ``timer'' log level. This lets us ``set log debug'' without filling our filesystem/screen with junk that we don't really want to see. o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming connections that aren't on STDIN_FILENO now. o Allow return values from our FSM LayerUp functions. If LayerUp() fails, the FSM does an immediate FsmDown() without calling the fsm_parent's Layer{Up,Down} functions. o Clear the close-on-exec flag of file descriptor 3 when executing chat programs so that our documented ability to communicate with /dev/tty via that descriptor works. Also document it as descriptor 3, not 4 :-O o Allow a ``rm'' command as an alias for ``remove''. o Fix the bind()/connect()/accept() calls made by the MP server. o Create bundle_SendDatalink() and bundle_ReceiveDatalink(). This allows `struct datalink's to flatten themselves, pass through a pipe (read: the eye of a needle !) and come alive at the other end. The donator then fork()s & exec()s pppmpipe, ``passing'' the connection to another ppp instance. *** PPP NOW TALKS MULTILINK :-))) *** Our link utilization is hideous, and lots of code needs tidying still. It's also probably riddled with bugs ! It's been tested against itself only, and has hung once, so confidence isn't high....
1998-04-30 23:53:56 +00:00
}
o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS, using the scatter/gather array to transfer the link information. The whole link is now passed in one message. This is far better than the two `/bin/cat' processes per additional link :-) I remember years ago thinking that file descriptor transferral would be a really amazing facility ! Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu> and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
while (niov--)
free(iov[niov].iov_base);
o Add the link name to modem diagnostics. o Create struct mpserver as part of struct mp. mpserver creates a unix-domain socket based on the peers auth name and endpoint discriminator. If it already exists, ppp will ``pass the link'' over to the owner of the socket, joining it into the bundle of another ppp invocation, otherwise ppp waits for other invocations to pass it links through this socket. The final piece of code will be the code that flattens our datalink info and passes it down this channel (not yet implemented).
1998-04-28 01:25:46 +00:00
}
Reference in New Issue Copy Permalink