d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
187e120cbe
freebsd-dev/sys/modules/Makefile

299 lines
3.3 KiB
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
Module-ize the 'core' crypto stuff. This may still need to be compiled into the kernel by default (if required), but other modules can now depend() on this. Fix inter-module dependancy. Earlier version OK'ed by: sam
2002-10-16 14:31:34 +00:00
.if exists(${.CURDIR}/../opencrypto) && !defined(NOCRYPT)
_crypto= crypto
_cryptodev= cryptodev
.endif
Honour appropriate no-crypto flags.
2000-07-07 09:38:01 +00:00
.if exists(${.CURDIR}/../crypto) && !defined(NOCRYPT)
After some complaints about the dir names, the random device is now in dirs called sys/*/random/ instead of sys/*/randomdev/*. Introduce blocking, but only at startup; the random device will block until the first reseed happens to prevent clients from using untrustworthy output. Provide a read_random() call for the rest of the kernel so that the entropy device does not need to be present. This means that things like IPX no longer need to have "device random" hardcoded into thir kernel config. The downside is that read_random() will provide very poor output until the entropy device is loaded and reseeded. It is recommended that developers do NOT use the read_random() call; instead, they should use arc4random() which internally uses read_random(). Clean up the mutex and locking code a bit; this makes it possible to unload the module again.
2000-10-14 10:59:56 +00:00
_random= random
Honour appropriate no-crypto flags.
2000-07-07 09:38:01 +00:00
.endif
Make 3dfx i386-only. The memrange API it uses may be defined in an MI header, but it is only implemented on i386.
2002-11-08 20:04:38 +00:00
SUBDIR= accf_data \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
accf_http \
aha \
Hook the aic7xxx modules up. This requires some extra care since aicasm is a compiler tool and needs to be compiled by the host compiler. I've tested this in i386->sparc cross-build, 4.7->current upgrade, normal buildkernel target, and normal /sys/i386/compile/GENERIC configurations. Submitted by: ru
2002-11-03 23:48:14 +00:00
aic7xxx \
Make AIO a loadable module. Remove the explicit call to aio_proc_rundown() from exit1(), instead AIO will use at_exit(9). Add functions at_exec(9), rm_at_exec(9) which function nearly the same as at_exec(9) and rm_at_exec(9), these functions are called on behalf of modules at the time of execve(2) after the image activator has run. Use a modified version of tegge's suggestion via at_exec(9) to close an exploitable race in AIO. Fix SYSCALL_MODULE_HELPER such that it's archetecuterally neutral, the problem was that one had to pass it a paramater indicating the number of arguments which were actually the number of "int". Fix it by using an inline version of the AS macro against the syscall arguments. (AS should be available globally but we'll get to that later.) Add a primative system for dynamically adding kqueue ops, it's really not as sophisticated as it should be, but I'll discuss with jlemon when he's around.
2001-12-29 07:13:47 +00:00
aio \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
amr \
an \
aue \
Add device driver support for the Broadcom BCM570x family of gigabit ethernet controllers. This adds support for the 3Com 3c996-T, the SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on Dell PowerEdge 2550 servers. The latter configuration hauls ass: preliminary measurements show TCP speeds of over 900Mbps using only normal size frames. TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping are supported, as well as interrupt moderation. Still need to fix autonegotiation support for 1000baseSX NICs, but beyond that, driver is pretty solid.
2001-09-27 23:55:28 +00:00
bge \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 07:09:27 +00:00
bridge \
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
cam \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ccd \
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
cd9660 \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
coda \
Module-ize the 'core' crypto stuff. This may still need to be compiled into the kernel by default (if required), but other modules can now depend() on this. Fix inter-module dependancy. Earlier version OK'ed by: sam
2002-10-16 14:31:34 +00:00
${_crypto} \
${_cryptodev} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
cue \
dc \
de \
digi \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 07:09:27 +00:00
dummynet \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
fdc \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
fdescfs \
Move firewire back to being MI.
2002-11-07 16:19:43 +00:00
firewire \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
fxp \
Hook the gx module up to the build.
2001-10-19 02:21:16 +00:00
gx \
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
hifn \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_disc \
if_ef \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
if_faith \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_gif \
Connect if_gre module to the build.
2002-09-06 17:18:53 +00:00
if_gre \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_ppp \
if_sl \
if_stf \
if_tap \
if_tun \
Attach if_vlan to the build process.
2001-09-05 23:47:46 +00:00
if_vlan \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ip6fw \
Unbreak ip_mroute_mod
2001-07-25 20:15:17 +00:00
ip_mroute_mod \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ipfw \
Add an isp(4) module. sbus support is only compiled in on sparc64. pci support is always compiled in.
2002-10-31 19:50:18 +00:00
isp \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ispfw \
joy \
kue \
lge \
Connect libiconv to the build. Recent work by fjoe and bp has fixed smbfs. The smbfs module can now be loaded once libiconv and libmchain have been loaded, and works!
2001-12-12 10:11:16 +00:00
libiconv \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
libmchain \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
lpt \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_biba \
mac_bsdextended \
mac_ifoff \
Hook up the mac_lomac module build. Approved by: re Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-11-26 17:35:44 +00:00
mac_lomac \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_mls \
mac_none \
Provide a simple sample labeled access control policy, mac_partition. This policy can be loaded dynamically, and assigns each process a partition number, as well as permitting processes to operate outside the partition. Processes contained in a partition can only "see" processes inside the same partition, so it's a little like jail. The partition of a user can be set using the label mechanisms in login.conf. This sample policy is a good starting point for developers wanting to learn about how to produce labeled policies, as it labels only one kernel object, the process credential. PR: Submitted by: Reviewed by: Approved by: Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-10-23 23:36:26 +00:00
mac_partition \
A cute yet small MAC policy that provides a simple ACL mechanism to permit users and groups to bind ports for TCP or UDP, and is intended to be combined with the recently committed support for net.inet.ip.portrange.reservedhigh. The policy is twiddled using sysctl(8). To use this module, you will need to compile in MAC support, and probably set reservedhigh to 0, then twiddle security.mac.portacl.rules to set things as desired. This policy module only restricts ports explicitly bound using bind(), not implicitly bound ports where the port number is selected by the IP stack. It appears to work properly in my local configuration, but needs more broad testing. A sample policy might be: # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79" This permits uid 425 to bind TCP sockets to ports 79 and 80. Currently no distinction is made for incoming vs. outgoing ports with TCP, although that would probably be easy to add. Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
mac_portacl \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_seeotheruids \
mac_test \
Turn on the mcd(4) module.
2002-10-04 07:15:34 +00:00
mcd \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
md \
mii \
mlx \
Add a module for mpt(4).
2002-10-31 19:39:23 +00:00
mpt \
Oops. Actually connect back msdosfs to the build for every platform. Spotted by: bde
2002-10-06 08:07:40 +00:00
msdosfs \
Hook up the if_my module to the build.
2003-02-27 14:49:56 +00:00
my \
Cleanup and split of nfs client and server code. This builds on the top of several repo-copies.
2001-09-18 23:32:09 +00:00
nfsclient \
nfsserver \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
nge \
nmdm \
ntfs \
nullfs \
pcn \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
plip \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
portalfs \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
ppbus \
ppi \
pps \
Move the pseudofs, procfs and linprocfs modules out from the fs directory. Keeping them there seemed like a good idea at the time, but it annoys bde and confuses people who do not understand how MODULES_OVERRIDE works.
2002-02-04 20:16:50 +00:00
procfs \
pseudofs \
Hook the RAIDFrame module up to the build Approved by: re
2002-11-21 14:52:20 +00:00
raidframe \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
${_random} \
Move rc(4) over to MI notes and enable it as a MI module.
2002-11-08 19:34:26 +00:00
rc \
hookup wlan and rcv4 modules to the build Reviewed by: imp
2003-01-15 20:06:38 +00:00
rc4 \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
rl \
rp \
sf \
sis \
sk \
sn \
snp \
ste \
sym \
sysvipc \
ti \
tl \
Connect trm(4) to the build. Reviewed by: mux (mentor) Approved by: mux (mentor)
2002-10-13 18:44:26 +00:00
trm \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
twe \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
tx \
You were knocked senseless by the Boomerang, spun around by the Cyclone, blown over by the Hurricane and had a house dropped on you by the Tornado. Now it's time to have your parade rained on by... the Typhoon! This commit adds driver support for 3Com 3cR990 10/100 ethernet adapters based on the Typhoon I and Typhoon II chipsets. This is actually a port of the OpenBSD driver with many hacks by me. No Virginia, there isn't any support for the hardware crypto yet. However there is support for TCP/IP checksum offload and VLANs. Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for squeezing enough info out of 3Com to get this written, and for doing most of the hard work. Manual page is included. Compiled as a module and included in GENERIC.
2001-07-23 20:44:54 +00:00
txp \
Connect ubsa module to build. Forgotten by: kan
2002-10-20 20:35:14 +00:00
ubsa \
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
ubsec \
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
ucom \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
udbp \
Add a filesystem driver for the Universal Disk Format. For more info, see http://people.freebsd.org/~scottl/udf MFC after: when asmodai gets the backport done Prodded by: phk asmodai des
2002-04-14 16:36:49 +00:00
udf \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
ufm \
Add the uftdi ucom driver which supports the following adapters: Inland UAS111 QVS USC-1000 HP USB-Serial adapter shipped with some HP laptops Submitted by: takawata MFC After: 7 days
2002-08-11 23:32:33 +00:00
uftdi \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ugen \
uhid \
ukbd \
ulpt \
umapfs \
umass \
umodem \
ums \
unionfs \
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
uplcom \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
urio \
usb \
The USB scanner driver. To be used together with SANE.
2000-10-25 10:34:38 +00:00
uscanner \
Commit a version of the uvisor driver for connecting Handspring Visors via USB. Submitted by: Chia-liang Kao <clkao@clkao.org>
2002-07-30 17:44:28 +00:00
uvisor \
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
uvscom \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
vpo \
vr \
vx \
wb \
hookup wlan and rcv4 modules to the build Reviewed by: imp
2003-01-15 20:06:38 +00:00
wlan \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
xl
Add the usb module and move the USB related modules into the generic section USB seems to compile on Alpha's as well.
1999-11-22 03:48:33 +00:00
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
.if defined(WANT_EXT2FS_MODULE)
SUBDIR+=ext2fs
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
.endif
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
.if !defined(NO_IPFILTER)
Replaced hacks in sbin/Makefile,v 1.99 and usr.sbin/Makefile,v 1.217 with the NO_IPFILTER make.conf(5) knob. (So that we can "make the-rest-of-the-world" again.)
2002-03-21 09:15:39 +00:00
SUBDIR+=ipfilter
.endif
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
.if ${MACHINE_ARCH} != "sparc64"
SUBDIR+=syscons
.endif
Don't try to build i386-centric modules on non-i386 systems.
1998-11-04 17:15:07 +00:00
# XXX some of these can move to the general case when de-i386'ed
Add cardbus, cbb, ep and pccard. These can likely be moved to the MI section, but I've not had a chance to build them on other architectures recently enough to add them.
2002-09-26 05:54:24 +00:00
# XXX some of these can move now, but are untested on other architectures.
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.if ${MACHINE_ARCH} == "i386"
Make 3dfx i386-only. The memrange API it uses may be defined in an MI header, but it is only implemented on i386.
2002-11-08 20:04:38 +00:00
SUBDIR+=3dfx \
We only provide agp drivers for the intel chipsets, move the agp subdir to the i386-only section.
2003-02-13 21:13:10 +00:00
agp \
Make 3dfx i386-only. The memrange API it uses may be defined in an MI header, but it is only implemented on i386.
2002-11-08 20:04:38 +00:00
aic \
Add the aout module subdir for the i386.
2002-09-07 01:31:38 +00:00
aout \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
apm \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ar \
- generic Arcnet framework - device driver for SMC COM90cx6 Arcnet network adapters Obtained from: NetBSD
2002-01-08 20:03:13 +00:00
arcnet \
Correct alphabetization of awi entry. Inane act of: re Spotted by: bde
2002-12-08 17:59:44 +00:00
awi \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
bktr \
coff \
Build the drm module also on pc98.
2003-03-09 10:12:58 +00:00
drm \
ed(4) uses kvtop() and is thus i386-only. It has several other warnings related to sizeof(int) != sizeof(void *), but kvtop() is much harder to fix. Approved by: imp
2002-11-06 22:03:53 +00:00
ed \
Add module infrastructure for elink.
2003-03-29 13:42:20 +00:00
elink \
-Remove unneeded include stddef.h -Modify modules Makefile so that em driver compiles only on i386 platform. (Alpha not supported yet) PR: kern/32993 MFC after: 1
2001-12-20 17:55:49 +00:00
em \
Add cardbus, cbb, ep and pccard. These can likely be moved to the MI section, but I've not had a chance to build them on other architectures recently enough to add them.
2002-09-26 05:54:24 +00:00
ep \
Make the fe driver kernel object module to compile in default. Reviewed by: imp
2001-09-02 06:43:45 +00:00
fe \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
fpu \
gnufpu \
- Add 'hea'. - Compile 'hfa' only on i386 (for now).
2002-06-03 09:13:22 +00:00
hea \
hfa \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ibcs2 \
Add module infrastructure for if_ie.
2003-03-29 13:40:41 +00:00
ie \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
linprocfs \
Linux compiles broken on alpha again. Remove.
2001-10-19 05:04:02 +00:00
linux \
lnc(4) uses kvtop() and is thus i386-only for now.
2002-11-06 22:56:57 +00:00
lnc \
Build the ncp and nwfs modules again, but only on i386 for now.
2003-02-27 11:31:08 +00:00
ncp \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
ncv \
Linux compiles broken on alpha again. Remove.
2001-10-19 05:04:02 +00:00
netgraph \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
nsp \
Build the ncp and nwfs modules again, but only on i386 for now.
2003-02-27 11:31:08 +00:00
nwfs \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
oltr \
Add cardbus, cbb, ep and pccard. These can likely be moved to the MI section, but I've not had a chance to build them on other architectures recently enough to add them.
2002-09-26 05:54:24 +00:00
pccard \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
pecoff \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ray \
Add driver for Granch SBNI12-xx ISA and PCI network adapters. MFC after: 1 week
2001-11-21 22:29:35 +00:00
sbni \
Add modules of scsi_low based SCSI drivers ncv, nsp, stg, and common part scsi_low. Submitted-by: takawata
2001-12-15 12:44:38 +00:00
scsi_low \
Enable build of smbfs. It works now as before on both UP and MP machines.
2001-12-02 09:01:35 +00:00
smbfs \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
sound \
Retire 'atspeaker' and 'pcspeaker'. We'll use 'speaker' which is the same as the config device directive. Reminded by: Takahashi Yoshihiro <nyan@jp.FreeBSD.org>
2003-03-29 09:59:49 +00:00
speaker \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
splash \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
sppp \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sr \
Add modules of scsi_low based SCSI drivers ncv, nsp, stg, and common part scsi_low. Submitted-by: takawata
2001-12-15 12:44:38 +00:00
stg \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
streams \
Vinum doesn't build on ia64. See PR: 38678
2002-05-29 04:51:14 +00:00
vinum \
Add a module of xe driver. Approved by: imp
2002-02-20 15:00:34 +00:00
wi \
xe
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.if ${MACHINE} == "i386"
SUBDIR+=aac \
acpi \
asr \
cardbus \
cbb \
ciss \
cm \
el \
exca \
iir \
mly \
s3 \
A driver for the System Management Application Program Interface (SMAPI) BIOS, which is present on some IBM Thinkpad models (560, 600, 770 to name a few.) The SMAPI BIOS provides access to System Information, System Configuration, and Power Management.
2003-01-17 08:10:18 +00:00
smapi \
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
vesa
.elif ${MACHINE} == "pc98"
Add CanBe power management controller support. Submitted by: KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>
2003-02-03 14:46:26 +00:00
SUBDIR+=canbepm \
canbus \
Don't build unneeded modules for pc98.
2002-09-16 08:32:48 +00:00
pmc \
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
snc
.endif
Don't build unneeded modules for pc98.
2002-09-16 08:32:48 +00:00
.endif
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
.if ${MACHINE_ARCH} == "ia64"
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
# Modules not enabled on ia64 (as compared to i386) include:
# aac acpi aout apm atspeaker drm fpu gnufpu ibcs2 linprocfs linux ncv
# nsp oltr pecoff s3 sbni stg vesa
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
SUBDIR+=aic \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
ar \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
arcnet \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
asr \
bktr \
cardbus \
cbb \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
ciss \
cm \
coff \
el \
em \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
ep \
exca \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
fe \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
hea \
hfa \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
iir \
mly \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
netgraph \
pccard \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
ray \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
rc \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
scsi_low \
smbfs \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
sound \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
splash \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
sppp \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
sr \
streams \
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
vinum \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
wi \
xe
.endif
Enable building of the OSF/1 compat module.
1999-12-15 13:14:23 +00:00
.if ${MACHINE_ARCH} == "alpha"
Split the arch-specific AGP files into the appropriate files.* and do the same for the agp module, and add agp to the list of modules to compile for alpha. Add an alpha_mb() to agp_flush_cache for alpha -- it's not correct but may improve the situation, and it's what linux and NetBSD do.
2003-02-14 06:33:52 +00:00
SUBDIR+=agp \
linprocfs \
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
linux \
osf1 \
sound \
Vinum doesn't build on ia64. See PR: 38678
2002-05-29 04:51:14 +00:00
sppp \
vinum
Enable building of the OSF/1 compat module.
1999-12-15 13:14:23 +00:00
.endif
Build gem(4) on powerpc also.
2003-01-09 16:37:37 +00:00
.if ${MACHINE_ARCH} == "powerpc" || ${MACHINE_ARCH} == "sparc64"
SUBDIR+=gem
.endif
Add an hme(4) module. PR: 46871 Submitted by: Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-08 18:45:04 +00:00
.if ${MACHINE_ARCH} == "sparc64"
Build gem(4) on powerpc also.
2003-01-09 16:37:37 +00:00
SUBDIR+=hme
Add an hme(4) module. PR: 46871 Submitted by: Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-08 18:45:04 +00:00
.endif
Always build all modules for LINT
2002-02-17 21:00:20 +00:00
.if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES)
Add support for MODULES_OVERRIDE. This is a list of modules to build instead of all of them. You can put this in /etc/make.conf or in makeoptions. Reviewed by: arch@ # docs to follow.
2001-04-02 08:52:05 +00:00
SUBDIR=${MODULES_OVERRIDE}
.endif
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
# Calling kldxref(8) for each module is expensive.
Run kldxref on sparc64, it works now.
2003-01-21 05:52:48 +00:00
.if !defined(NO_XREF)
Simplify the assignment statement.
2003-03-12 14:32:46 +00:00
.MAKEFLAGS+= -DNO_XREF
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
afterinstall:
Check that kldxref(8) exists before running it.
2002-05-14 07:49:12 +00:00
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
.endif
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
.include <bsd.subdir.mk>
Reference in New Issue Copy Permalink