freebsd-dev/sys/netinet/ip_divert.c

757 lines
20 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#if !defined(KLD_MODULE)
#include "opt_inet.h"
#include "opt_ipfw.h"
#include "opt_mac.h"
#ifndef INET
#error "IPDIVERT requires INET."
#endif
#ifndef IPFIREWALL
#error "IPDIVERT requires IPFIREWALL"
#endif
#endif
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/kernel.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/vimage.h>
#include <vm/uma.h>
#include <net/if.h>
Over the past couple of years, there have been a number of reports relating the use of divert sockets to dead locks. A number of LORs have been reported between divert and a number of other network subsystems including: IPSEC, Pfil, multicast, ipfw and others. Other dead locks could occur because of recursive entry into the IP stack. This change should take care of most if not all of these issues. A summary of the changes follow: - We disallow multicast operations on divert sockets. It really doesn't make semantic sense to allow this, since typically you would set multicast parameters on multicast end points. NOTE: As a part of this change, we actually dis-allow multicast options on any socket that IS a divert socket OR IS NOT a SOCK_RAW or SOCK_DGRAM family - We check to see if there are any socket options that have been specified on the socket, and if there was (which is very un-common and also probably doesnt make sense to support) we duplicate the mbuf carrying the options. - We then drop the INP/INFO locks over the call to ip_output(). It should be noted that since we no longer support multicast operations on divert sockets and we have duplicated any socket options, we no longer need the reference to the pcb to be coherent. - Finally, we replaced the call to ip_input() to use netisr queuing. This should remove the recursive entry into the IP stack from divert. By dropping the locks over the call to ip_output() we eliminate all the lock ordering issues above. By switching over to netisr on the inbound path, we can no longer recursively enter the ip_input() code via divert. I have tested this change by using the following command: ipfwpcap -r 8000 - | tcpdump -r - -nn -v This should exercise the input and re-injection (outbound) path, which is very similar to the work load performed by natd(8). Additionally, I have run some ospf daemons which have a heavy reliance on raw sockets and multicast. Approved by: re@ (kensmith) MFC after: 1 month LOR: 163 LOR: 181 LOR: 202 LOR: 203 Discussed with: julian, andre et al (on freebsd-net) In collaboration with: bms [1], rwatson [2] [1] bms helped out with the multicast decisions [2] rwatson submitted the original netisr patches and came up with some of the original ideas on how to combat this issue.
2007-08-06 22:06:36 +00:00
#include <net/netisr.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip_divert.h>
#include <netinet/ip_var.h>
#include <netinet/ip_fw.h>
#include <security/mac/mac_framework.h>
/*
* Divert sockets
*/
/*
* Allocate enough space to hold a full IP packet
*/
#define DIVSNDQ (65536 + 100)
#define DIVRCVQ (65536 + 100)
/*
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
* Divert sockets work in conjunction with ipfw, see the divert(4)
* manpage for features.
* Internally, packets selected by ipfw in ip_input() or ip_output(),
* and never diverted before, are passed to the input queue of the
* divert socket with a given 'divert_port' number (as specified in
* the matching ipfw rule), and they are tagged with a 16 bit cookie
* (representing the rule number of the matching ipfw rule), which
* is passed to process reading from the socket.
*
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
* Packets written to the divert socket are again tagged with a cookie
* (usually the same as above) and a destination address.
* If the destination address is INADDR_ANY then the packet is
* treated as outgoing and sent to ip_output(), otherwise it is
* treated as incoming and sent to ip_input().
* In both cases, the packet is tagged with the cookie.
*
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
* On reinjection, processing in ip_input() and ip_output()
* will be exactly the same as for the original packet, except that
* ipfw processing will start at the rule number after the one
* written in the cookie (so, tagging a packet with a cookie of 0
* will cause it to be effectively considered as a standard packet).
*/
/* Internal variables. */
static struct inpcbhead divcb;
static struct inpcbinfo divcbinfo;
static u_long div_sendspace = DIVSNDQ; /* XXX sysctl ? */
static u_long div_recvspace = DIVRCVQ; /* XXX sysctl ? */
/*
* Initialize divert connection block queue.
*/
static void
div_zone_change(void *tag)
{
uma_zone_set_max(V_divcbinfo.ipi_zone, maxsockets);
}
static int
div_inpcb_init(void *mem, int size, int flags)
{
struct inpcb *inp = mem;
INP_LOCK_INIT(inp, "inp", "divinp");
return (0);
}
static void
div_inpcb_fini(void *mem, int size)
{
struct inpcb *inp = mem;
INP_LOCK_DESTROY(inp);
}
void
div_init(void)
{
INP_INFO_LOCK_INIT(&V_divcbinfo, "div");
LIST_INIT(&V_divcb);
V_divcbinfo.ipi_listhead = &V_divcb;
/*
* XXX We don't use the hash list for divert IP, but it's easier
* to allocate a one entry hash list than it is to check all
* over the place for hashbase == NULL.
*/
V_divcbinfo.ipi_hashbase = hashinit(1, M_PCB, &V_divcbinfo.ipi_hashmask);
V_divcbinfo.ipi_porthashbase = hashinit(1, M_PCB,
&V_divcbinfo.ipi_porthashmask);
V_divcbinfo.ipi_zone = uma_zcreate("divcb", sizeof(struct inpcb),
NULL, NULL, div_inpcb_init, div_inpcb_fini, UMA_ALIGN_PTR,
UMA_ZONE_NOFREE);
uma_zone_set_max(divcbinfo.ipi_zone, maxsockets);
EVENTHANDLER_REGISTER(maxsockets_change, div_zone_change,
NULL, EVENTHANDLER_PRI_ANY);
}
/*
* IPPROTO_DIVERT is not in the real IP protocol number space; this
* function should never be called. Just in case, drop any packets.
*/
void
div_input(struct mbuf *m, int off)
{
V_ipstat.ips_noproto++;
m_freem(m);
}
/*
* Divert a packet by passing it up to the divert socket at port 'port'.
*
* Setup generic address and protocol structures for div_input routine,
* then pass them along with mbuf chain.
*/
static void
divert_packet(struct mbuf *m, int incoming)
{
struct ip *ip;
struct inpcb *inp;
struct socket *sa;
u_int16_t nport;
struct sockaddr_in divsrc;
struct m_tag *mtag;
mtag = m_tag_find(m, PACKET_TAG_DIVERT, NULL);
if (mtag == NULL) {
printf("%s: no divert tag\n", __func__);
m_freem(m);
return;
}
/* Assure header */
if (m->m_len < sizeof(struct ip) &&
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
(m = m_pullup(m, sizeof(struct ip))) == 0)
return;
ip = mtod(m, struct ip *);
/* Delayed checksums are currently not compatible with divert. */
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
ip->ip_len = ntohs(ip->ip_len);
in_delayed_cksum(m);
m->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
ip->ip_len = htons(ip->ip_len);
}
/*
* Record receive interface address, if any.
* But only for incoming packets.
*/
bzero(&divsrc, sizeof(divsrc));
divsrc.sin_len = sizeof(divsrc);
divsrc.sin_family = AF_INET;
divsrc.sin_port = divert_cookie(mtag); /* record matching rule */
if (incoming) {
struct ifaddr *ifa;
/* Sanity check */
M_ASSERTPKTHDR(m);
/* Find IP address for receive interface */
TAILQ_FOREACH(ifa, &m->m_pkthdr.rcvif->if_addrhead, ifa_link) {
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
divsrc.sin_addr =
((struct sockaddr_in *) ifa->ifa_addr)->sin_addr;
break;
}
}
/*
* Record the incoming interface name whenever we have one.
*/
if (m->m_pkthdr.rcvif) {
/*
* Hide the actual interface name in there in the
* sin_zero array. XXX This needs to be moved to a
* different sockaddr type for divert, e.g.
* sockaddr_div with multiple fields like
* sockaddr_dl. Presently we have only 7 bytes
* but that will do for now as most interfaces
* are 4 or less + 2 or less bytes for unit.
* There is probably a faster way of doing this,
* possibly taking it from the sockaddr_dl on the iface.
* This solves the problem of a P2P link and a LAN interface
* having the same address, which can result in the wrong
* interface being assigned to the packet when fed back
* into the divert socket. Theoretically if the daemon saves
* and re-uses the sockaddr_in as suggested in the man pages,
* this iface name will come along for the ride.
* (see div_output for the other half of this.)
*/
strlcpy(divsrc.sin_zero, m->m_pkthdr.rcvif->if_xname,
sizeof(divsrc.sin_zero));
}
/* Put packet on socket queue, if any */
sa = NULL;
nport = htons((u_int16_t)divert_info(mtag));
INP_INFO_RLOCK(&V_divcbinfo);
LIST_FOREACH(inp, &V_divcb, inp_list) {
/* XXX why does only one socket match? */
if (inp->inp_lport == nport) {
INP_RLOCK(inp);
sa = inp->inp_socket;
SOCKBUF_LOCK(&sa->so_rcv);
if (sbappendaddr_locked(&sa->so_rcv,
(struct sockaddr *)&divsrc, m,
(struct mbuf *)0) == 0) {
SOCKBUF_UNLOCK(&sa->so_rcv);
sa = NULL; /* force mbuf reclaim below */
} else
sorwakeup_locked(sa);
INP_RUNLOCK(inp);
break;
}
}
INP_INFO_RUNLOCK(&V_divcbinfo);
if (sa == NULL) {
m_freem(m);
V_ipstat.ips_noproto++;
V_ipstat.ips_delivered--;
}
}
/*
* Deliver packet back into the IP processing machinery.
*
* If no address specified, or address is 0.0.0.0, send to ip_output();
* otherwise, send to ip_input() and mark as having been received on
* the interface with that address.
*/
static int
div_output(struct socket *so, struct mbuf *m, struct sockaddr_in *sin,
struct mbuf *control)
{
struct m_tag *mtag;
struct divert_tag *dt;
int error = 0;
Over the past couple of years, there have been a number of reports relating the use of divert sockets to dead locks. A number of LORs have been reported between divert and a number of other network subsystems including: IPSEC, Pfil, multicast, ipfw and others. Other dead locks could occur because of recursive entry into the IP stack. This change should take care of most if not all of these issues. A summary of the changes follow: - We disallow multicast operations on divert sockets. It really doesn't make semantic sense to allow this, since typically you would set multicast parameters on multicast end points. NOTE: As a part of this change, we actually dis-allow multicast options on any socket that IS a divert socket OR IS NOT a SOCK_RAW or SOCK_DGRAM family - We check to see if there are any socket options that have been specified on the socket, and if there was (which is very un-common and also probably doesnt make sense to support) we duplicate the mbuf carrying the options. - We then drop the INP/INFO locks over the call to ip_output(). It should be noted that since we no longer support multicast operations on divert sockets and we have duplicated any socket options, we no longer need the reference to the pcb to be coherent. - Finally, we replaced the call to ip_input() to use netisr queuing. This should remove the recursive entry into the IP stack from divert. By dropping the locks over the call to ip_output() we eliminate all the lock ordering issues above. By switching over to netisr on the inbound path, we can no longer recursively enter the ip_input() code via divert. I have tested this change by using the following command: ipfwpcap -r 8000 - | tcpdump -r - -nn -v This should exercise the input and re-injection (outbound) path, which is very similar to the work load performed by natd(8). Additionally, I have run some ospf daemons which have a heavy reliance on raw sockets and multicast. Approved by: re@ (kensmith) MFC after: 1 month LOR: 163 LOR: 181 LOR: 202 LOR: 203 Discussed with: julian, andre et al (on freebsd-net) In collaboration with: bms [1], rwatson [2] [1] bms helped out with the multicast decisions [2] rwatson submitted the original netisr patches and came up with some of the original ideas on how to combat this issue.
2007-08-06 22:06:36 +00:00
struct mbuf *options;
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
/*
* An mbuf may hasn't come from userland, but we pretend
* that it has.
*/
m->m_pkthdr.rcvif = NULL;
m->m_nextpkt = NULL;
if (control)
m_freem(control); /* XXX */
if ((mtag = m_tag_find(m, PACKET_TAG_DIVERT, NULL)) == NULL) {
mtag = m_tag_get(PACKET_TAG_DIVERT, sizeof(struct divert_tag),
M_NOWAIT | M_ZERO);
if (mtag == NULL) {
error = ENOBUFS;
goto cantsend;
}
dt = (struct divert_tag *)(mtag+1);
m_tag_prepend(m, mtag);
} else
dt = (struct divert_tag *)(mtag+1);
/* Loopback avoidance and state recovery */
if (sin) {
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
int i;
dt->cookie = sin->sin_port;
/*
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
* Find receive interface with the given name, stuffed
* (if it exists) in the sin_zero[] field.
* The name is user supplied data so don't trust its size
* or that it is zero terminated.
*/
for (i = 0; i < sizeof(sin->sin_zero) && sin->sin_zero[i]; i++)
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
;
if ( i > 0 && i < sizeof(sin->sin_zero))
m->m_pkthdr.rcvif = ifunit(sin->sin_zero);
}
/* Reinject packet into the system as incoming or outgoing */
if (!sin || sin->sin_addr.s_addr == 0) {
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
struct ip *const ip = mtod(m, struct ip *);
struct inpcb *inp;
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
dt->info |= IP_FW_DIVERT_OUTPUT_FLAG;
INP_INFO_WLOCK(&V_divcbinfo);
inp = sotoinpcb(so);
INP_RLOCK(inp);
/*
* Don't allow both user specified and setsockopt options,
* and don't allow packet length sizes that will crash
*/
if (((ip->ip_hl != (sizeof (*ip) >> 2)) && inp->inp_options) ||
((u_short)ntohs(ip->ip_len) > m->m_pkthdr.len)) {
error = EINVAL;
INP_RUNLOCK(inp);
INP_INFO_WUNLOCK(&V_divcbinfo);
m_freem(m);
} else {
/* Convert fields to host order for ip_output() */
ip->ip_len = ntohs(ip->ip_len);
ip->ip_off = ntohs(ip->ip_off);
/* Send packet to output processing */
V_ipstat.ips_rawout++; /* XXX */
#ifdef MAC
mac_inpcb_create_mbuf(inp, m);
#endif
Over the past couple of years, there have been a number of reports relating the use of divert sockets to dead locks. A number of LORs have been reported between divert and a number of other network subsystems including: IPSEC, Pfil, multicast, ipfw and others. Other dead locks could occur because of recursive entry into the IP stack. This change should take care of most if not all of these issues. A summary of the changes follow: - We disallow multicast operations on divert sockets. It really doesn't make semantic sense to allow this, since typically you would set multicast parameters on multicast end points. NOTE: As a part of this change, we actually dis-allow multicast options on any socket that IS a divert socket OR IS NOT a SOCK_RAW or SOCK_DGRAM family - We check to see if there are any socket options that have been specified on the socket, and if there was (which is very un-common and also probably doesnt make sense to support) we duplicate the mbuf carrying the options. - We then drop the INP/INFO locks over the call to ip_output(). It should be noted that since we no longer support multicast operations on divert sockets and we have duplicated any socket options, we no longer need the reference to the pcb to be coherent. - Finally, we replaced the call to ip_input() to use netisr queuing. This should remove the recursive entry into the IP stack from divert. By dropping the locks over the call to ip_output() we eliminate all the lock ordering issues above. By switching over to netisr on the inbound path, we can no longer recursively enter the ip_input() code via divert. I have tested this change by using the following command: ipfwpcap -r 8000 - | tcpdump -r - -nn -v This should exercise the input and re-injection (outbound) path, which is very similar to the work load performed by natd(8). Additionally, I have run some ospf daemons which have a heavy reliance on raw sockets and multicast. Approved by: re@ (kensmith) MFC after: 1 month LOR: 163 LOR: 181 LOR: 202 LOR: 203 Discussed with: julian, andre et al (on freebsd-net) In collaboration with: bms [1], rwatson [2] [1] bms helped out with the multicast decisions [2] rwatson submitted the original netisr patches and came up with some of the original ideas on how to combat this issue.
2007-08-06 22:06:36 +00:00
/*
* Get ready to inject the packet into ip_output().
* Just in case socket options were specified on the
* divert socket, we duplicate them. This is done
* to avoid having to hold the PCB locks over the call
* to ip_output(), as doing this results in a number of
* lock ordering complexities.
*
* Note that we set the multicast options argument for
* ip_output() to NULL since it should be invariant that
* they are not present.
*/
KASSERT(inp->inp_moptions == NULL,
("multicast options set on a divert socket"));
options = NULL;
/*
* XXXCSJP: It is unclear to me whether or not it makes
* sense for divert sockets to have options. However,
* for now we will duplicate them with the INP locks
* held so we can use them in ip_output() without
* requring a reference to the pcb.
*/
if (inp->inp_options != NULL) {
options = m_dup(inp->inp_options, M_DONTWAIT);
if (options == NULL)
error = ENOBUFS;
}
INP_RUNLOCK(inp);
INP_INFO_WUNLOCK(&V_divcbinfo);
Over the past couple of years, there have been a number of reports relating the use of divert sockets to dead locks. A number of LORs have been reported between divert and a number of other network subsystems including: IPSEC, Pfil, multicast, ipfw and others. Other dead locks could occur because of recursive entry into the IP stack. This change should take care of most if not all of these issues. A summary of the changes follow: - We disallow multicast operations on divert sockets. It really doesn't make semantic sense to allow this, since typically you would set multicast parameters on multicast end points. NOTE: As a part of this change, we actually dis-allow multicast options on any socket that IS a divert socket OR IS NOT a SOCK_RAW or SOCK_DGRAM family - We check to see if there are any socket options that have been specified on the socket, and if there was (which is very un-common and also probably doesnt make sense to support) we duplicate the mbuf carrying the options. - We then drop the INP/INFO locks over the call to ip_output(). It should be noted that since we no longer support multicast operations on divert sockets and we have duplicated any socket options, we no longer need the reference to the pcb to be coherent. - Finally, we replaced the call to ip_input() to use netisr queuing. This should remove the recursive entry into the IP stack from divert. By dropping the locks over the call to ip_output() we eliminate all the lock ordering issues above. By switching over to netisr on the inbound path, we can no longer recursively enter the ip_input() code via divert. I have tested this change by using the following command: ipfwpcap -r 8000 - | tcpdump -r - -nn -v This should exercise the input and re-injection (outbound) path, which is very similar to the work load performed by natd(8). Additionally, I have run some ospf daemons which have a heavy reliance on raw sockets and multicast. Approved by: re@ (kensmith) MFC after: 1 month LOR: 163 LOR: 181 LOR: 202 LOR: 203 Discussed with: julian, andre et al (on freebsd-net) In collaboration with: bms [1], rwatson [2] [1] bms helped out with the multicast decisions [2] rwatson submitted the original netisr patches and came up with some of the original ideas on how to combat this issue.
2007-08-06 22:06:36 +00:00
if (error == ENOBUFS) {
m_freem(m);
return (error);
}
error = ip_output(m, options, NULL,
((so->so_options & SO_DONTROUTE) ?
IP_ROUTETOIF : 0) | IP_ALLOWBROADCAST |
IP_RAWOUTPUT, NULL, NULL);
if (options != NULL)
m_freem(options);
}
} else {
dt->info |= IP_FW_DIVERT_LOOPBACK_FLAG;
if (m->m_pkthdr.rcvif == NULL) {
/*
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
* No luck with the name, check by IP address.
* Clear the port and the ifname to make sure
* there are no distractions for ifa_ifwithaddr.
*/
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
struct ifaddr *ifa;
bzero(sin->sin_zero, sizeof(sin->sin_zero));
sin->sin_port = 0;
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
ifa = ifa_ifwithaddr((struct sockaddr *) sin);
if (ifa == NULL) {
error = EADDRNOTAVAIL;
goto cantsend;
}
m->m_pkthdr.rcvif = ifa->ifa_ifp;
}
#ifdef MAC
SOCK_LOCK(so);
mac_socket_create_mbuf(so, m);
SOCK_UNLOCK(so);
#endif
Over the past couple of years, there have been a number of reports relating the use of divert sockets to dead locks. A number of LORs have been reported between divert and a number of other network subsystems including: IPSEC, Pfil, multicast, ipfw and others. Other dead locks could occur because of recursive entry into the IP stack. This change should take care of most if not all of these issues. A summary of the changes follow: - We disallow multicast operations on divert sockets. It really doesn't make semantic sense to allow this, since typically you would set multicast parameters on multicast end points. NOTE: As a part of this change, we actually dis-allow multicast options on any socket that IS a divert socket OR IS NOT a SOCK_RAW or SOCK_DGRAM family - We check to see if there are any socket options that have been specified on the socket, and if there was (which is very un-common and also probably doesnt make sense to support) we duplicate the mbuf carrying the options. - We then drop the INP/INFO locks over the call to ip_output(). It should be noted that since we no longer support multicast operations on divert sockets and we have duplicated any socket options, we no longer need the reference to the pcb to be coherent. - Finally, we replaced the call to ip_input() to use netisr queuing. This should remove the recursive entry into the IP stack from divert. By dropping the locks over the call to ip_output() we eliminate all the lock ordering issues above. By switching over to netisr on the inbound path, we can no longer recursively enter the ip_input() code via divert. I have tested this change by using the following command: ipfwpcap -r 8000 - | tcpdump -r - -nn -v This should exercise the input and re-injection (outbound) path, which is very similar to the work load performed by natd(8). Additionally, I have run some ospf daemons which have a heavy reliance on raw sockets and multicast. Approved by: re@ (kensmith) MFC after: 1 month LOR: 163 LOR: 181 LOR: 202 LOR: 203 Discussed with: julian, andre et al (on freebsd-net) In collaboration with: bms [1], rwatson [2] [1] bms helped out with the multicast decisions [2] rwatson submitted the original netisr patches and came up with some of the original ideas on how to combat this issue.
2007-08-06 22:06:36 +00:00
/* Send packet to input processing via netisr */
netisr_queue(NETISR_IP, m);
}
return error;
cantsend:
m_freem(m);
return error;
}
static int
div_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("div_attach: inp != NULL"));
if (td != NULL) {
error = priv_check(td, PRIV_NETINET_DIVERT);
if (error)
return (error);
}
error = soreserve(so, div_sendspace, div_recvspace);
if (error)
return error;
INP_INFO_WLOCK(&V_divcbinfo);
error = in_pcballoc(so, &V_divcbinfo);
if (error) {
INP_INFO_WUNLOCK(&V_divcbinfo);
return error;
}
inp = (struct inpcb *)so->so_pcb;
INP_INFO_WUNLOCK(&V_divcbinfo);
inp->inp_ip_p = proto;
inp->inp_vflag |= INP_IPV4;
inp->inp_flags |= INP_HDRINCL;
INP_WUNLOCK(inp);
return 0;
}
static void
div_detach(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_detach: inp == NULL"));
INP_INFO_WLOCK(&V_divcbinfo);
INP_WLOCK(inp);
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(&V_divcbinfo);
}
static int
div_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_bind: inp == NULL"));
2002-06-23 09:13:46 +00:00
/* in_pcbbind assumes that nam is a sockaddr_in
* and in_pcbbind requires a valid address. Since divert
* sockets don't we need to make sure the address is
* filled in properly.
* XXX -- divert should not be abusing in_pcbind
* and should probably have its own family.
*/
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
if (nam->sa_family != AF_INET)
return EAFNOSUPPORT;
((struct sockaddr_in *)nam)->sin_addr.s_addr = INADDR_ANY;
INP_INFO_WLOCK(&V_divcbinfo);
INP_WLOCK(inp);
error = in_pcbbind(inp, nam, td->td_ucred);
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_divcbinfo);
return error;
}
static int
div_shutdown(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_shutdown: inp == NULL"));
INP_WLOCK(inp);
socantsendmore(so);
INP_WUNLOCK(inp);
return 0;
}
static int
div_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *nam,
struct mbuf *control, struct thread *td)
{
/* Packet must have a header (but that's about it) */
if (m->m_len < sizeof (struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == 0) {
V_ipstat.ips_toosmall++;
m_freem(m);
return EINVAL;
}
/* Send packet */
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
return div_output(so, m, (struct sockaddr_in *)nam, control);
}
void
div_ctlinput(int cmd, struct sockaddr *sa, void *vip)
{
struct in_addr faddr;
faddr = ((struct sockaddr_in *)sa)->sin_addr;
if (sa->sa_family != AF_INET || faddr.s_addr == INADDR_ANY)
return;
if (PRC_IS_REDIRECT(cmd))
return;
}
static int
div_pcblist(SYSCTL_HANDLER_ARGS)
{
int error, i, n;
struct inpcb *inp, **inp_list;
inp_gen_t gencnt;
struct xinpgen xig;
/*
* The process of preparing the TCB list is too time-consuming and
* resource-intensive to repeat twice on every request.
*/
if (req->oldptr == 0) {
n = V_divcbinfo.ipi_count;
req->oldidx = 2 * (sizeof xig)
+ (n + n/8) * sizeof(struct xinpcb);
return 0;
}
if (req->newptr != 0)
return EPERM;
/*
* OK, now we're committed to doing something.
*/
INP_INFO_RLOCK(&V_divcbinfo);
gencnt = V_divcbinfo.ipi_gencnt;
n = V_divcbinfo.ipi_count;
INP_INFO_RUNLOCK(&V_divcbinfo);
error = sysctl_wire_old_buffer(req,
2 * sizeof(xig) + n*sizeof(struct xinpcb));
if (error != 0)
return (error);
xig.xig_len = sizeof xig;
xig.xig_count = n;
xig.xig_gen = gencnt;
xig.xig_sogen = so_gencnt;
error = SYSCTL_OUT(req, &xig, sizeof xig);
if (error)
return error;
inp_list = malloc(n * sizeof *inp_list, M_TEMP, M_WAITOK);
if (inp_list == 0)
return ENOMEM;
INP_INFO_RLOCK(&V_divcbinfo);
for (inp = LIST_FIRST(V_divcbinfo.ipi_listhead), i = 0; inp && i < n;
inp = LIST_NEXT(inp, inp_list)) {
INP_RLOCK(inp);
if (inp->inp_gencnt <= gencnt &&
cr_canseesocket(req->td->td_ucred, inp->inp_socket) == 0)
inp_list[i++] = inp;
INP_RUNLOCK(inp);
}
INP_INFO_RUNLOCK(&V_divcbinfo);
n = i;
error = 0;
for (i = 0; i < n; i++) {
inp = inp_list[i];
INP_RLOCK(inp);
if (inp->inp_gencnt <= gencnt) {
struct xinpcb xi;
bzero(&xi, sizeof(xi));
xi.xi_len = sizeof xi;
/* XXX should avoid extra copy */
bcopy(inp, &xi.xi_inp, sizeof *inp);
if (inp->inp_socket)
sotoxsocket(inp->inp_socket, &xi.xi_socket);
INP_RUNLOCK(inp);
error = SYSCTL_OUT(req, &xi, sizeof xi);
} else
INP_RUNLOCK(inp);
}
if (!error) {
/*
* Give the user an updated idea of our state.
* If the generation differs from what we told
* her before, she knows that something happened
* while we were processing this request, and it
* might be necessary to retry.
*/
INP_INFO_RLOCK(&V_divcbinfo);
xig.xig_gen = V_divcbinfo.ipi_gencnt;
xig.xig_sogen = so_gencnt;
xig.xig_count = V_divcbinfo.ipi_count;
INP_INFO_RUNLOCK(&V_divcbinfo);
error = SYSCTL_OUT(req, &xig, sizeof xig);
}
free(inp_list, M_TEMP);
return error;
}
#ifdef SYSCTL_NODE
SYSCTL_NODE(_net_inet, IPPROTO_DIVERT, divert, CTLFLAG_RW, 0, "IPDIVERT");
SYSCTL_PROC(_net_inet_divert, OID_AUTO, pcblist, CTLFLAG_RD, 0, 0,
div_pcblist, "S,xinpcb", "List of active divert sockets");
#endif
struct pr_usrreqs div_usrreqs = {
.pru_attach = div_attach,
.pru_bind = div_bind,
.pru_control = in_control,
.pru_detach = div_detach,
.pru_peeraddr = in_getpeeraddr,
.pru_send = div_send,
.pru_shutdown = div_shutdown,
.pru_sockaddr = in_getsockaddr,
2004-11-11 19:02:01 +00:00
.pru_sosetlabel = in_pcbsosetlabel
};
struct protosw div_protosw = {
.pr_type = SOCK_RAW,
.pr_protocol = IPPROTO_DIVERT,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = div_input,
.pr_ctlinput = div_ctlinput,
.pr_ctloutput = ip_ctloutput,
.pr_init = div_init,
.pr_usrreqs = &div_usrreqs
};
static int
div_modevent(module_t mod, int type, void *unused)
{
int err = 0;
int n;
switch (type) {
case MOD_LOAD:
/*
* Protocol will be initialized by pf_proto_register().
* We don't have to register ip_protox because we are not
* a true IP protocol that goes over the wire.
*/
err = pf_proto_register(PF_INET, &div_protosw);
ip_divert_ptr = divert_packet;
break;
case MOD_QUIESCE:
/*
* IPDIVERT may normally not be unloaded because of the
* potential race conditions. Tell kldunload we can't be
* unloaded unless the unload is forced.
*/
err = EPERM;
break;
case MOD_UNLOAD:
/*
* Forced unload.
*
* Module ipdivert can only be unloaded if no sockets are
* connected. Maybe this can be changed later to forcefully
* disconnect any open sockets.
*
* XXXRW: Note that there is a slight race here, as a new
* socket open request could be spinning on the lock and then
* we destroy the lock.
*/
INP_INFO_WLOCK(&V_divcbinfo);
n = V_divcbinfo.ipi_count;
if (n != 0) {
err = EBUSY;
INP_INFO_WUNLOCK(&V_divcbinfo);
break;
}
ip_divert_ptr = NULL;
err = pf_proto_unregister(PF_INET, IPPROTO_DIVERT, SOCK_RAW);
INP_INFO_WUNLOCK(&V_divcbinfo);
INP_INFO_LOCK_DESTROY(&V_divcbinfo);
uma_zdestroy(V_divcbinfo.ipi_zone);
break;
default:
err = EOPNOTSUPP;
break;
}
return err;
}
static moduledata_t ipdivertmod = {
"ipdivert",
div_modevent,
0
};
DECLARE_MODULE(ipdivert, ipdivertmod, SI_SUB_PROTO_IFATTACHDOMAIN, SI_ORDER_ANY);
MODULE_DEPEND(dummynet, ipfw, 2, 2, 2);
MODULE_VERSION(ipdivert, 1);