2000-09-29 13:46:07 +00:00
|
|
|
#
|
2000-12-10 04:32:34 +00:00
|
|
|
# GENERIC -- Generic kernel configuration file for FreeBSD/ia64
|
2000-09-29 13:46:07 +00:00
|
|
|
#
|
|
|
|
|
# For more information on this file, please read the handbook section on
|
|
|
|
|
# Kernel Configuration Files:
|
|
|
|
|
#
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
|
2000-09-29 13:46:07 +00:00
|
|
|
#
|
|
|
|
|
# The handbook is also available locally in /usr/share/doc/handbook
|
|
|
|
|
# if you've installed the doc distribution, otherwise always see the
|
|
|
|
|
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
|
|
|
|
|
# latest information.
|
|
|
|
|
#
|
|
|
|
|
# An exhaustive list of options and more detailed explanations of the
|
2003-09-07 06:39:51 +00:00
|
|
|
# device lines is also present in the ../../conf/NOTES and NOTES files.
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
# If you are in doubt as to the purpose or necessity of a line, check
|
|
|
|
|
# first in NOTES.
|
2000-09-29 13:46:07 +00:00
|
|
|
#
|
|
|
|
|
# For hardware specific information check HARDWARE.TXT
|
|
|
|
|
#
|
|
|
|
|
# $FreeBSD$
|
|
|
|
|
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
cpu ITANIUM2
|
2000-09-29 13:46:07 +00:00
|
|
|
ident GENERIC
|
|
|
|
|
|
2003-09-07 06:39:51 +00:00
|
|
|
makeoptions DEBUG=-g # Build kernel with debug information.
|
|
|
|
|
|
2008-02-16 18:30:58 +00:00
|
|
|
options AUDIT # Security event auditing
|
2011-12-29 22:48:36 +00:00
|
|
|
options CAPABILITY_MODE # Capsicum capability mode
|
|
|
|
|
options CAPABILITIES # Capsicum capabilities
|
2003-09-07 06:39:51 +00:00
|
|
|
options CD9660 # ISO 9660 Filesystem
|
2008-01-07 21:40:11 +00:00
|
|
|
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
|
2003-09-07 06:39:51 +00:00
|
|
|
options FFS # Berkeley Fast Filesystem
|
2008-02-16 18:30:58 +00:00
|
|
|
options GEOM_LABEL # Provides labelization
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
options INCLUDE_CONFIG_FILE # Include this file in kernel
|
2003-09-07 06:39:51 +00:00
|
|
|
options INET # InterNETworking
|
|
|
|
|
options INET6 # IPv6 communications protocols
|
|
|
|
|
options KTRACE # ktrace(1) syscall trace support
|
2009-10-24 20:35:34 +00:00
|
|
|
options MAC # TrustedBSD MAC Framework
|
2003-09-07 06:39:51 +00:00
|
|
|
options MD_ROOT # MD usable as root device
|
|
|
|
|
options MSDOSFS # MSDOS Filesystem
|
2011-04-27 17:51:51 +00:00
|
|
|
options NFSCL # New Network Filesystem Client
|
2008-03-27 11:54:20 +00:00
|
|
|
options NFSLOCKD # Network Lock Manager
|
2011-04-27 17:51:51 +00:00
|
|
|
options NFSD # New Network Filesystem Server
|
2003-09-07 06:39:51 +00:00
|
|
|
options NFS_ROOT # NFS usable as root device
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
options P1003_1B_SEMAPHORES # POSIX-style semaphores
|
2011-07-04 16:59:26 +00:00
|
|
|
#options PREEMPTION # Enable kernel thread preemption
|
2009-10-24 20:35:34 +00:00
|
|
|
options PRINTF_BUFR_SIZE=128 # Printf buffering to limit interspersion
|
2003-09-07 06:39:51 +00:00
|
|
|
options PROCFS # Process filesystem (/proc)
|
|
|
|
|
options PSEUDOFS # Pseudo-filesystem framework
|
2008-04-15 05:02:42 +00:00
|
|
|
options SCHED_ULE # ULE scheduler
|
2003-09-07 06:39:51 +00:00
|
|
|
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
|
2008-02-16 18:30:58 +00:00
|
|
|
options SCTP # Stream Control Transmission Protocol
|
2005-09-05 21:36:28 +00:00
|
|
|
options SMP # Symmetric Multi-Processor support
|
2003-09-07 06:39:51 +00:00
|
|
|
options SOFTUPDATES # Enable FFS soft updates support
|
Break out stack(9) from ddb(4):
- Introduce per-architecture stack_machdep.c to hold stack_save(9).
- Introduce per-architecture machine/stack.h to capture any common
definitions required between db_trace.c and stack_machdep.c.
- Add new kernel option "options STACK"; we will build in stack(9) if it is
defined, or also if "options DDB" is defined to provide compatibility
with existing users of stack(9).
Add new stack_save_td(9) function, which allows the capture of a stacktrace
of another thread rather than the current thread, which the existing
stack_save(9) was limited to. It requires that the thread be neither
swapped out nor running, which is the responsibility of the consumer to
enforce.
Update stack(9) man page.
Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v
Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
|
|
|
options STACK # stack(9) support
|
2003-09-07 06:39:51 +00:00
|
|
|
options SYSVMSG # SYSV-style message queues
|
|
|
|
|
options SYSVSEM # SYSV-style semaphores
|
|
|
|
|
options SYSVSHM # SYSV-style shared memory
|
|
|
|
|
options UFS_ACL # Support for access control lists
|
|
|
|
|
options UFS_DIRHASH # Hash-based directory lookup scheme
|
2008-02-16 18:30:58 +00:00
|
|
|
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
|
2013-01-03 19:03:41 +00:00
|
|
|
options QUOTA # Enable disk quotas for UFS
|
2011-10-26 22:28:28 +00:00
|
|
|
options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B RT extensions
|
|
|
|
|
|
2011-10-27 13:07:49 +00:00
|
|
|
# Debugging support. Always need this:
|
|
|
|
|
options KDB # Enable kernel debugger support.
|
|
|
|
|
# For minimum debugger support (stable branch) use:
|
|
|
|
|
#options KDB_TRACE # Print a stack trace for a panic.
|
|
|
|
|
# For full debugger support use this instead:
|
2011-10-26 22:28:28 +00:00
|
|
|
options DDB # Support DDB
|
|
|
|
|
options GDB # Support remote GDB
|
|
|
|
|
options DEADLKRES # Enable the deadlock resolver
|
|
|
|
|
options INVARIANTS # Enable calls of extra sanity checking
|
|
|
|
|
options INVARIANT_SUPPORT # required by INVARIANTS
|
2008-02-16 18:30:58 +00:00
|
|
|
options WITNESS # Enable checks to detect deadlocks and cycles
|
|
|
|
|
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
|
2010-07-28 15:36:12 +00:00
|
|
|
options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
|
2003-09-07 06:39:51 +00:00
|
|
|
|
|
|
|
|
# Various "busses"
|
2004-05-02 18:57:29 +00:00
|
|
|
device miibus # MII bus support (Ethernet)
|
2003-09-07 06:39:51 +00:00
|
|
|
device pci # PCI bus support
|
2011-04-24 08:58:58 +00:00
|
|
|
device scbus # SCSI bus (required for ATA/SCSI)
|
2009-02-23 18:34:56 +00:00
|
|
|
device usb # USB Bus (required for USB)
|
2000-09-29 13:46:07 +00:00
|
|
|
|
2011-04-24 08:58:58 +00:00
|
|
|
# ATA controllers
|
|
|
|
|
device ahci # AHCI-compatible SATA controllers
|
|
|
|
|
device ata # Legacy ATA/SATA controllers
|
|
|
|
|
options ATA_CAM # Handle legacy controllers with CAM
|
|
|
|
|
device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
|
|
|
|
|
device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
|
2000-09-29 13:46:07 +00:00
|
|
|
|
|
|
|
|
# SCSI Controllers
|
2003-09-07 06:39:51 +00:00
|
|
|
device ahc # AHA2940 and AIC7xxx devices
|
|
|
|
|
device ahd # AHA39320/29320 and AIC79xx devices
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device hptiop # Highpoint RocketRaid 3xxx series
|
2000-09-29 13:46:07 +00:00
|
|
|
device isp # Qlogic family
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
device mpt # LSI-Logic MPT-Fusion
|
2003-09-07 06:39:51 +00:00
|
|
|
device sym # NCR/Symbios Logic
|
2000-09-29 13:46:07 +00:00
|
|
|
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
# RAID controllers interfaced to the SCSI subsystem
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device amr # AMI MegaRAID
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
device ciss # Compaq Smart RAID 5*
|
2003-09-07 06:39:51 +00:00
|
|
|
device dpt # DPT Smartcache III, IV
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
device iir # Intel Integrated RAID
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device ips # IBM (Adaptec) ServeRAID
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
device mly # Mylex AcceleRAID/eXtremeRAID
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device twa # 3ware 9000 series PATA/SATA RAID
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
|
2011-04-24 08:58:58 +00:00
|
|
|
# ATA/SCSI peripherals
|
2003-09-07 06:39:51 +00:00
|
|
|
device cd # CD-ROM, DVD-ROM etc.
|
|
|
|
|
device ch # Media changer
|
|
|
|
|
device da # Direct Access (ie disk)
|
2011-04-24 08:58:58 +00:00
|
|
|
device pass # Passthrough (direct ATA/SCSI access)
|
2003-09-07 06:39:51 +00:00
|
|
|
device sa # Sequential Access (ie tape)
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
device ses # Enclosure Services (SES and SAF-TE)
|
|
|
|
|
device ctl # CAM Target Layer
|
2000-09-29 13:46:07 +00:00
|
|
|
|
|
|
|
|
# RAID controllers
|
2004-09-02 18:05:26 +00:00
|
|
|
device aac # Adaptec FSA RAID
|
|
|
|
|
device aacp # SCSI passthrough for aac (requires CAM)
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
device ida # Compaq Smart RAID
|
2000-09-29 13:46:07 +00:00
|
|
|
device mlx # Mylex DAC960 family
|
|
|
|
|
|
2003-09-07 06:39:51 +00:00
|
|
|
# USB host controllers and peripherals
|
2010-04-22 21:31:34 +00:00
|
|
|
options USB_DEBUG # enable debug msgs
|
2009-02-23 18:34:56 +00:00
|
|
|
device ehci # EHCI host controller
|
|
|
|
|
device ohci # OHCI PCI->USB interface
|
|
|
|
|
device uhci # UHCI PCI->USB interface
|
|
|
|
|
device uhid # Human Interface Devices
|
|
|
|
|
device ukbd # Keyboard
|
|
|
|
|
device ulpt # Printer
|
|
|
|
|
device umass # Disks/Mass storage (need scbus & da)
|
|
|
|
|
device ums # Mouse
|
2003-09-07 06:39:51 +00:00
|
|
|
|
2000-09-29 13:46:07 +00:00
|
|
|
# PCI Ethernet NICs.
|
|
|
|
|
device de # DEC/Intel DC21x4x (``Tulip'')
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device em # Intel PRO/1000 Gigabit Ethernet Family
|
|
|
|
|
device igb # Intel PRO/1000 PCIE Server Gigabit Family
|
|
|
|
|
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
|
2001-09-15 09:09:13 +00:00
|
|
|
device txp # 3Com 3cR990 (``Typhoon'')
|
2000-09-29 13:46:07 +00:00
|
|
|
|
|
|
|
|
# PCI Ethernet NICs that use the common MII bus controller code.
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device ae # Attansic/Atheros L2 FastEthernet
|
|
|
|
|
device age # Attansic/Atheros L1 Gigabit Ethernet
|
|
|
|
|
device alc # Atheros AR8131/AR8132 Ethernet
|
|
|
|
|
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
|
|
|
|
|
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
|
|
|
|
|
device bfe # Broadcom BCM440x 10/100 Ethernet
|
Adopt, adapt and improve:
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
2003-01-05 00:04:28 +00:00
|
|
|
device bge # Broadcom BCM570xx Gigabit Ethernet
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device et # Agere ET1310 10/100/Gigabit Ethernet
|
|
|
|
|
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
|
|
|
|
|
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
|
|
|
|
|
device nge # NatSemi DP83820 gigabit Ethernet
|
2001-09-15 09:09:13 +00:00
|
|
|
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
|
Take the support for the 8139C+/8169/8169S/8110S chips out of the
rl(4) driver and put it in a new re(4) driver. The re(4) driver shares
the if_rlreg.h file with rl(4) but is a separate module. (Ultimately
I may change this. For now, it's convenient.)
rl(4) has been modified so that it will never attach to an 8139C+
chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to
match the 8169/8169S/8110S gigE chips. if_re.c contains the same
basic code that was originally bolted onto if_rl.c, with the
following updates:
- Added support for jumbo frames. Currently, there seems to be
a limit of approximately 6200 bytes for jumbo frames on transmit.
(This was determined via experimentation.) The 8169S/8110S chips
apparently are limited to 7.5K frames on transmit. This may require
some more work, though the framework to handle jumbo frames on RX
is in place: the re_rxeof() routine will gather up frames than span
multiple 2K clusters into a single mbuf list.
- Fixed bug in re_txeof(): if we reap some of the TX buffers,
but there are still some pending, re-arm the timer before exiting
re_txeof() so that another timeout interrupt will be generated, just
in case re_start() doesn't do it for us.
- Handle the 'link state changed' interrupt
- Fix a detach bug. If re(4) is loaded as a module, and you do
tcpdump -i re0, then you do 'kldunload if_re,' the system will
panic after a few seconds. This happens because ether_ifdetach()
ends up calling the BPF detach code, which notices the interface
is in promiscuous mode and tries to switch promisc mode off while
detaching the BPF listner. This ultimately results in a call
to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init()
to handle the IFF_PROMISC flag change. Unfortunately, calling re_init()
here turns the chip back on and restarts the 1-second timeout loop
that drives re_tick(). By the time the timeout fires, if_re.ko
has been unloaded, which results in a call to invalid code and
blows up the system.
To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(),
which stops the ioctl routine from trying to reset the chip.
- Modified comments in re_rxeof() relating to the difference in
RX descriptor status bit layout between the 8139C+ and the gigE
chips. The layout is different because the frame length field
was expanded from 12 bits to 13, and they got rid of one of the
status bits to make room.
- Add diagnostic code (re_diag()) to test for the case where a user
has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some
NICs have the REQ64# and ACK64# lines connected even though the
board is 32-bit only (in this case, they should be pulled high).
This fools the chip into doing 64-bit DMA transfers even though
there is no 64-bit data path. To detect this, re_diag() puts the
chip into digital loopback mode and sets the receiver to promiscuous
mode, then initiates a single 64-byte packet transmission. The
frame is echoed back to the host, and if the frame contents are
intact, we know DMA is working correctly, otherwise we complain
loudly on the console and abort the device attach. (At the moment,
I don't know of any way to work around the problem other than
physically modifying the board, so until/unless I can think of a
software workaround, this will have do to.)
- Created re(4) man page
- Modified rlphy.c to allow re(4) to attach as well as rl(4).
Note that this code works for the sample 8169/Marvell 88E1000 NIC
that I have, but probably won't work for the 8169S/8110S chips.
RealTek has sent me some sample NICs, but they haven't arrived yet.
I will probably need to add an rlgphy driver to handle the on-board
PHY in the 8169S/8110S (it needs special DSP initialization).
2003-09-08 02:11:25 +00:00
|
|
|
device re # RealTek 8139C+/8169/8169S/8110S
|
2000-09-29 13:46:07 +00:00
|
|
|
device sf # Adaptec AIC-6915 (``Starfire'')
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
|
|
|
|
|
device ste # Sundance ST201 (D-Link DFE-550TX)
|
|
|
|
|
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
|
|
|
|
|
device tx # SMC EtherPower II (83c170 ``EPIC'')
|
|
|
|
|
device vge # VIA VT612x gigabit Ethernet
|
2003-09-07 06:39:51 +00:00
|
|
|
device xl # 3Com 3c90x ("Boomerang", "Cyclone")
|
2000-09-29 13:46:07 +00:00
|
|
|
|
2009-02-23 18:34:56 +00:00
|
|
|
# USB Ethernet
|
|
|
|
|
device aue # ADMtek USB Ethernet
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device axe # ASIX Electronics USB Ethernet
|
2009-02-23 18:34:56 +00:00
|
|
|
device cdce # Generic USB over Ethernet
|
|
|
|
|
device cue # CATC USB Ethernet
|
|
|
|
|
device kue # Kawasaki LSI USB Ethernet
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device rue # RealTek RTL8150 USB Ethernet
|
|
|
|
|
device udav # Davicom DM9601E USB
|
|
|
|
|
|
|
|
|
|
# USB Serial
|
|
|
|
|
device uark # Technologies ARK3116 based serial adapters
|
|
|
|
|
device ubsa # Belkin F5U103 and compatible serial adapters
|
|
|
|
|
device uftdi # For FTDI usb serial adapters
|
|
|
|
|
device uipaq # Some WinCE based devices
|
|
|
|
|
device uplcom # Prolific PL-2303 serial adapters
|
|
|
|
|
device uslcom # SI Labs CP2101/CP2102 serial adapters
|
|
|
|
|
device uvisor # Visor and Palm devices
|
|
|
|
|
device uvscom # USB serial support for DDI pocket's PHS
|
2003-04-21 16:44:05 +00:00
|
|
|
|
2012-01-05 17:28:05 +00:00
|
|
|
# Wireless NIC cards.
|
|
|
|
|
# The wlan(4) module assumes this, so just define it so it
|
|
|
|
|
# at least correctly loads.
|
|
|
|
|
options IEEE80211_SUPPORT_MESH
|
|
|
|
|
|
|
|
|
|
# The ath(4) and ath_hal(4) code requires this. The module currently
|
|
|
|
|
# builds everything including AR5416 (and later 11n NIC) support.
|
|
|
|
|
options AH_SUPPORT_AR5416
|
|
|
|
|
|
2003-09-07 06:39:51 +00:00
|
|
|
# Various (pseudo) devices
|
|
|
|
|
device ether # Ethernet support
|
|
|
|
|
device faith # IPv6-to-IPv4 relaying (translation)
|
|
|
|
|
device gif # IPv6 and IPv4 tunneling
|
|
|
|
|
device loop # Network loopback
|
|
|
|
|
device md # Memory "disks"
|
|
|
|
|
device puc # Multi I/O cards and multi-channel UARTs
|
|
|
|
|
device random # Entropy device
|
|
|
|
|
device tun # Packet tunnel.
|
|
|
|
|
device uart # Serial port (UART)
|
Bring up-to-date:
o Switch to ITANIUM2 has the cpu. This has absolutely no effect
on the code, but makes for a better example.
o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run
8-stable or newer.
o Add PREEMPTION. It works now.
o Remove HWPMC_HOOKS. We don't have support for hwpmc yet.
o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb,
ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste,
stge, tx, vge, axe, rue, udav, fwip, and all USB serial.
o Remove "legacy" devices: le, vx, dc, pcn, rl, sis.
Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
|
|
|
device vlan # 802.1Q VLAN support
|
2006-07-09 16:40:31 +00:00
|
|
|
device firmware # firmware assist module
|
2003-09-07 06:39:51 +00:00
|
|
|
|
|
|
|
|
# The `bpf' device enables the Berkeley Packet Filter.
|
|
|
|
|
# Be aware of the administrative consequences of enabling this!
|
2005-03-18 15:24:00 +00:00
|
|
|
# Note that 'bpf' is required for DHCP.
|
2003-09-07 06:39:51 +00:00
|
|
|
device bpf # Berkeley packet filter
|
