d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
18eeb47635
freebsd-dev/sys/conf/files

793 lines
28 KiB
Plaintext
Raw Normal View History

Add $FreeBSD$
1999-09-08 11:14:56 +00:00
# $FreeBSD$
Move the rules for aicasm to the MI conf file. Add kern/subr_autoconf.c as a standard file as it contains the bulk of the code for performing interrupt driven configuration.
1997-09-21 21:32:04 +00:00
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
aicasm optional ahc \
Update for CAM.
1998-09-15 09:59:15 +00:00
dependency "$S/dev/aic7xxx/*.[chyl]" \
compile-with "${MAKE} -f $S/dev/aic7xxx/Makefile MAKESRCPATH=$S/dev/aic7xxx" \
no-obj no-implicit-rule \
Clean aicasm's lex and yacc generated source files.
1998-09-21 04:41:11 +00:00
clean "aicasm aicasm_gram.c aicasm_scan.c y.tab.h"
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
aic7xxx_{seq,reg}.h optional ahc \
Move the rules for aicasm to the MI conf file. Add kern/subr_autoconf.c as a standard file as it contains the bulk of the code for performing interrupt driven configuration.
1997-09-21 21:32:04 +00:00
compile-with "./aicasm ${INCLUDES} -o aic7xxx_seq.h -r aic7xxx_reg.h $S/dev/aic7xxx/aic7xxx.seq" \
no-obj no-implicit-rule before-depend \
clean "aic7xxx_seq.h aic7xxx_reg.h" \
Update for CAM.
1998-09-15 09:59:15 +00:00
dependency "$S/dev/aic7xxx/aic7xxx.{reg,seq} $S/cam/scsi/scsi_message.h aicasm"
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
device_if.o standard \
compile-with "${NORMAL_C}" \
no-implicit-rule local
device_if.c standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/kern/device_if.m" \
perl -> perl5, to allow to compile on older boxes with perl5 installed (but without perl5 as the system perl)
1998-11-24 18:58:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -c $S/kern/device_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend local \
clean "device_if.c"
device_if.h standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/kern/device_if.m" \
perl -> perl5, to allow to compile on older boxes with perl5 installed (but without perl5 as the system perl)
1998-11-24 18:58:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -h $S/kern/device_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend \
clean "device_if.h"
bus_if.o standard \
compile-with "${NORMAL_C}" \
no-implicit-rule local
bus_if.c standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/kern/bus_if.m" \
perl -> perl5, to allow to compile on older boxes with perl5 installed (but without perl5 as the system perl)
1998-11-24 18:58:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -c $S/kern/bus_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend local \
clean "bus_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
bus_if.h standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/kern/bus_if.m" \
perl -> perl5, to allow to compile on older boxes with perl5 installed (but without perl5 as the system perl)
1998-11-24 18:58:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -h $S/kern/bus_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend \
clean "bus_if.h"
Finish conversion of cfs -> coda
1998-09-13 13:57:59 +00:00
coda/coda_namecache.c optional vcoda
coda/coda_fbsd.c optional vcoda
coda/coda_psdev.c optional vcoda
coda/coda_subr.c optional vcoda
coda/coda_venus.c optional vcoda
coda/coda_vfsops.c optional vcoda
coda/coda_vnops.c optional vcoda
Update for CAM.
1998-09-15 09:59:15 +00:00
cam/cam.c optional scbus
cam/cam_xpt.c optional scbus
cam/cam_extend.c optional scbus
cam/cam_queue.c optional scbus
cam/cam_periph.c optional scbus
cam/cam_sim.c optional scbus
cam/scsi/scsi_all.c optional scbus
cam/scsi/scsi_da.c optional da
cam/scsi/scsi_pt.c optional pt
cam/scsi/scsi_sa.c optional sa
cam/scsi/scsi_cd.c optional cd
cam/scsi/scsi_ch.c optional ch
cam/scsi/scsi_pass.c optional pass
cam/scsi/scsi_scan.c optional scan
cam/scsi/scsi_target.c optional targ
Add entry for the target mode black hole driver.
1999-01-14 06:16:45 +00:00
cam/scsi/scsi_targ_bh.c optional targbh
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
ddb/db_access.c optional ddb
Remove DDB_ELF_SYMBOLS and DDB_KLD_SYMBOLS options. KLD will be the sole interface to symbols in an elf kernel.
1998-10-09 23:26:26 +00:00
ddb/db_kld.c optional ddb
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
ddb/db_aout.c optional ddb
ddb/db_break.c optional ddb
ddb/db_command.c optional ddb
ddb/db_examine.c optional ddb
ddb/db_expr.c optional ddb
ddb/db_input.c optional ddb
ddb/db_lex.c optional ddb
ddb/db_output.c optional ddb
ddb/db_print.c optional ddb
1) Changed ddb into a option rather than a pseudo-device (use options DDB in your kernel config now). 2) Added ps ddb function from 1.1.5. Cleaned it up a bit and moved into its own file. 3) Added \r handing in db_printf. 4) Added missing memory usage stats to statclock(). 5) Added dummy function to pseudo_set so it will be emitted if there are no other pseudo declarations.
1994-08-27 16:14:39 +00:00
ddb/db_ps.c optional ddb
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
ddb/db_run.c optional ddb
ddb/db_sym.c optional ddb
ddb/db_trap.c optional ddb
ddb/db_variables.c optional ddb
ddb/db_watch.c optional ddb
ddb/db_write_cmd.c optional ddb
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/advansys/advansys.c optional adv
dev/advansys/advlib.c optional adv
dev/advansys/advmcode.c optional adv
dev/advansys/adwcam.c optional adw
dev/advansys/adwlib.c optional adw
dev/advansys/adwmcode.c optional adw
dev/aha/aha.c optional aha
dev/aic7xxx/aic7xxx.c optional ahc \
Update for CAM.
1998-09-15 09:59:15 +00:00
dependency "aic7xxx_{reg,seq}.h"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/aic7xxx/93cx6.c optional ahc
dev/buslogic/bt.c optional bt
dev/ccd/ccd.c optional ccd
#dev/dpt/dpt_control.c optional dpt
dev/dpt/dpt_scsi.c optional dpt
Make if_ed work again on pci, isa, isapnp. The hack to make it work on PCCARD is pretty revolting but should buy us time while the pccard driver angle is sorted out. A commit for the MCA ed attachment will follow shortly.
1999-09-20 05:48:16 +00:00
dev/ed/if_ed.c optional ed
dev/ed/if_ed_pci.c optional ed pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/en/midway.c optional en
dev/hea/eni.c optional hea
dev/hea/eni_buffer.c optional hea
dev/hea/eni_globals.c optional hea
dev/hea/eni_if.c optional hea
dev/hea/eni_init.c optional hea
dev/hea/eni_intr.c optional hea
dev/hea/eni_receive.c optional hea
dev/hea/eni_transmit.c optional hea
dev/hea/eni_vcm.c optional hea
dev/hfa/fore_buffer.c optional hfa
dev/hfa/fore_command.c optional hfa
dev/hfa/fore_globals.c optional hfa
dev/hfa/fore_if.c optional hfa
dev/hfa/fore_init.c optional hfa
dev/hfa/fore_intr.c optional hfa
dev/hfa/fore_load.c optional hfa
dev/hfa/fore_output.c optional hfa
dev/hfa/fore_receive.c optional hfa
dev/hfa/fore_stats.c optional hfa
dev/hfa/fore_timer.c optional hfa
dev/hfa/fore_transmit.c optional hfa
dev/hfa/fore_vcm.c optional hfa
dev/ida/ida.c optional ida
fix disordering
1999-06-24 03:42:14 +00:00
dev/ida/ida_disk.c optional id
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/isp/isp_freebsd.c optional isp
dev/isp/isp.c optional isp
Add an experimental Memory-Disk driver. This driver will allocate memory with malloc(9) using a few tricks to save space on the way.
1999-09-21 11:00:49 +00:00
dev/md/md.c optional md
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
dev/mii/mii.c optional miibus
dev/mii/mii_physubr.c optional miibus
dev/mii/ukphy.c optional miibus
dev/mii/ukphy_subr.c optional miibus
Add a driver for the AMD AM79c873 10/100 PHY. By some strange coincidence, this PHY and the Davicom DM9101 have exactly the same register definitions. One of them is probably a clone of the other. I'm not sure which. This is needed for the Davicom DM9102 10/100 PCI ethernet driver which will be committed shortly.
1999-09-06 05:27:55 +00:00
dev/mii/amphy.c optional miibus
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
dev/mii/exphy.c optional miibus
Add miibus drivers for the ThunderLAN internal PHY and the Micro Linear ML6692 PHY. The Micro Linear driver is my own; the ThunderLAN driver is a port of the NetBSD driver with various hacks. The ML driver is necessary to support the Olicom OC-2326 ThunderLAN-based NIC. Also regenerated miidevs.h to pick up the proper 'obtained from' revision string.
1999-08-27 18:33:36 +00:00
dev/mii/mlphy.c optional miibus
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
dev/mii/nsphy.c optional miibus
Add miibus drivers for the ThunderLAN internal PHY and the Micro Linear ML6692 PHY. The Micro Linear driver is my own; the ThunderLAN driver is a port of the NetBSD driver with various hacks. The ML driver is necessary to support the Olicom OC-2326 ThunderLAN-based NIC. Also regenerated miidevs.h to pick up the proper 'obtained from' revision string.
1999-08-27 18:33:36 +00:00
dev/mii/tlphy.c optional miibus
Add a driver for the internal PHY in the RealTek 8139.
1999-08-31 14:43:30 +00:00
dev/mii/rlphy.c optional miibus
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
miibus_if.o optional miibus \
dependency "miibus_if.c miibus_if.h" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
miibus_if.c optional miibus \
dependency "$S/kern/makedevops.pl $S/dev/mii/miibus_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -c $S/dev/mii/miibus_if.m" \
no-obj no-implicit-rule before-depend local \
clean "miibus_if.c"
miibus_if.h optional miibus \
dependency "$S/kern/makedevops.pl $S/dev/mii/miibus_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -h $S/dev/mii/miibus_if.m" \
no-obj no-implicit-rule before-depend \
clean "miibus_if.h"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/pdq/pdq.c optional fea
dev/pdq/pdq_ifsubr.c optional fea
dev/pdq/pdq.c optional fpa
dev/pdq/pdq_ifsubr.c optional fpa
Rename nlpt to lpt. Remove from ppi.c the old depreciated module stuff. Print info when if_plip can't use interrupts.
1999-02-14 12:00:00 +00:00
dev/ppbus/immio.c optional vpo
dev/ppbus/if_plip.c optional plip
dev/ppbus/lpbb.c optional lpbb
dev/ppbus/lpt.c optional lpt
Add new ppbus files. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:06:05 +00:00
dev/ppbus/ppb_base.c optional ppbus
dev/ppbus/ppb_1284.c optional ppbus
Major ppbus updates from the author. - ppbus now supports PLIP via the if_plip driver - ieee1284 infrastructure added, including parallel-port PnP - port microsequencer added, for scripting the sort of port I/O that is common with parallel devices without endless calls up and down through the driver structure. - improved bus ownership behaviour among the ppbus-using drivers. - improved I/O chipset feature detection The vpo driver is now implemented using the microsequencer, leading to some performance improvements as well as providing an extensive example of its use. Reviewed by: msmith Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00
dev/ppbus/ppb_msq.c optional ppbus
Add parallel-Port Bus drivers. Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:59:24 +00:00
dev/ppbus/ppbconf.c optional ppbus
Oops, reference the ppi and vpo drivers properly. Obviously nobody's using this stuff yet 8)
1997-08-16 12:21:23 +00:00
dev/ppbus/ppi.c optional ppi
Add a skelleton pulse-per-second timing driver. This will become more useful when I get my timecounter changes past the Bruce-filter.
1998-02-13 13:00:02 +00:00
dev/ppbus/pps.c optional pps
Oops, reference the ppi and vpo drivers properly. Obviously nobody's using this stuff yet 8)
1997-08-16 12:21:23 +00:00
dev/ppbus/vpo.c optional vpo
Major ppbus updates from the author. - ppbus now supports PLIP via the if_plip driver - ieee1284 infrastructure added, including parallel-port PnP - port microsequencer added, for scripting the sort of port I/O that is common with parallel devices without endless calls up and down through the driver structure. - improved bus ownership behaviour among the ppbus-using drivers. - improved I/O chipset feature detection The vpo driver is now implemented using the microsequencer, leading to some performance improvements as well as providing an extensive example of its use. Reviewed by: msmith Submitted by: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00
dev/ppbus/vpoio.c optional vpo
s/sio/nsio/
1999-09-08 11:07:40 +00:00
dev/sio/sio.c optional nsio
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
smbus_if.o optional smbus \
Add some missing dependencies. Grumbled about in principle: bde
1998-10-25 07:23:32 +00:00
dependency "smbus_if.c smbus_if.h" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
compile-with "${NORMAL_C}" \
no-implicit-rule local
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
smbus_if.c optional smbus \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/smbus/smbus_if.m" \
Whoops - wrong copy of files, so all wasn't converted. Rest of perl -> perl5
1998-11-24 19:02:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -c $S/dev/smbus/smbus_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend local \
clean "smbus_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
smbus_if.h optional smbus \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/smbus/smbus_if.m" \
Whoops - wrong copy of files, so all wasn't converted. Rest of perl -> perl5
1998-11-24 19:02:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -h $S/dev/smbus/smbus_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend \
clean "smbus_if.h"
dev/smbus/smbconf.c optional smbus
dev/smbus/smbus.c optional smbus
dev/smbus/smb.c optional smb
Extensions to iicbus(4) added + brooktree848 driver ported to new I2C framework.
1998-10-31 11:24:20 +00:00
dev/iicbus/iicbb.c optional iicbb
iicbb_if.o optional iicbb \
dependency "iicbb_if.c" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
iicbb_if.c optional iicbb \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/iicbus/iicbb_if.m" \
Whoops - wrong copy of files, so all wasn't converted. Rest of perl -> perl5
1998-11-24 19:02:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -c $S/dev/iicbus/iicbb_if.m" \
Extensions to iicbus(4) added + brooktree848 driver ported to new I2C framework.
1998-10-31 11:24:20 +00:00
no-obj no-implicit-rule before-depend local \
clean "iicbb_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
iicbb_if.h optional iicbb \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/iicbus/iicbb_if.m" \
Whoops - wrong copy of files, so all wasn't converted. Rest of perl -> perl5
1998-11-24 19:02:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -h $S/dev/iicbus/iicbb_if.m" \
Extensions to iicbus(4) added + brooktree848 driver ported to new I2C framework.
1998-10-31 11:24:20 +00:00
no-obj no-implicit-rule before-depend \
clean "iicbb_if.h"
Add some missing dependencies. Grumbled about in principle: bde
1998-10-25 07:23:32 +00:00
dev/iicbus/iicsmb.c optional iicsmb \
dependency "iicbus_if.h"
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
iicbus_if.o optional iicbus \
Add some missing dependencies. Grumbled about in principle: bde
1998-10-25 07:23:32 +00:00
dependency "iicbus_if.c iicbus_if.h" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
compile-with "${NORMAL_C}" \
no-implicit-rule local
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
iicbus_if.c optional iicbus \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/iicbus/iicbus_if.m" \
Whoops - wrong copy of files, so all wasn't converted. Rest of perl -> perl5
1998-11-24 19:02:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -c $S/dev/iicbus/iicbus_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend local \
clean "iicbus_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
iicbus_if.h optional iicbus \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/iicbus/iicbus_if.m" \
Whoops - wrong copy of files, so all wasn't converted. Rest of perl -> perl5
1998-11-24 19:02:43 +00:00
compile-with "perl5 $S/kern/makedevops.pl -h $S/dev/iicbus/iicbus_if.m" \
Reviewed by: Doug Rabson Submitted by: nsouch I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
no-obj no-implicit-rule before-depend \
clean "iicbus_if.h"
dev/iicbus/iiconf.c optional iicbus
dev/iicbus/iicbus.c optional iicbus
dev/iicbus/if_ic.c optional ic
dev/iicbus/iic.c optional iic
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/vinum/vinum.c optional vinum
dev/vinum/vinumconfig.c optional vinum
dev/vinum/vinumdaemon.c optional vinum
dev/vinum/vinuminterrupt.c optional vinum
dev/vinum/vinumio.c optional vinum
dev/vinum/vinumioctl.c optional vinum
dev/vinum/vinumlock.c optional vinum
dev/vinum/vinummemory.c optional vinum
dev/vinum/vinumparser.c optional vinum
Add vinumraid5.c to the files for Vinum. This allows (deprecated) kernel builds with Vinum. Linted-by: phk
1999-08-08 08:29:58 +00:00
dev/vinum/vinumraid5.c optional vinum
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/vinum/vinumrequest.c optional vinum
dev/vinum/vinumrevive.c optional vinum
dev/vinum/vinumstate.c optional vinum
dev/vinum/vinumutil.c optional vinum
Config glue for 'pseudo-device vinum'
1998-12-28 16:31:26 +00:00
dev/vn/vn.c optional vn
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/vx/if_vx.c optional vx
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
gnu/ext2fs/ext2_alloc.c optional ext2fs
gnu/ext2fs/ext2_balloc.c optional ext2fs
gnu/ext2fs/ext2_inode.c optional ext2fs
gnu/ext2fs/ext2_inode_cnv.c optional ext2fs
gnu/ext2fs/ext2_linux_balloc.c optional ext2fs
gnu/ext2fs/ext2_linux_ialloc.c optional ext2fs
gnu/ext2fs/ext2_lookup.c optional ext2fs
gnu/ext2fs/ext2_subr.c optional ext2fs
gnu/ext2fs/ext2_vfsops.c optional ext2fs
gnu/ext2fs/ext2_vnops.c optional ext2fs
Initial entry of ISDN4BSD into the FreeBSD tree. ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis, who has done a tremendous amount of work to bring us this far. There are still some outstanding issues and files to bring into the tree, and for now it will be needed to pick up all the extra docs from the isdn4bsd release. It is probably also a very good idea to subscribe to the isdn@freebsd.org mailing list before you try this out. These files correspond to release "beta Version 0.70.00 / December 1998" from Hellmuth.
1998-12-27 21:47:14 +00:00
# device drivers
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
i4b/driver/i4b_trace.c optional i4btrc
i4b/driver/i4b_rbch.c optional i4brbch
i4b/driver/i4b_tel.c optional i4btel
i4b/driver/i4b_ipr.c optional i4bipr
i4b/driver/i4b_ctl.c optional i4bctl
i4b/driver/i4b_isppp.c optional i4bisppp
Initial entry of ISDN4BSD into the FreeBSD tree. ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis, who has done a tremendous amount of work to bring us this far. There are still some outstanding issues and files to bring into the tree, and for now it will be needed to pick up all the extra docs from the isdn4bsd release. It is probably also a very good idea to subscribe to the isdn@freebsd.org mailing list before you try this out. These files correspond to release "beta Version 0.70.00 / December 1998" from Hellmuth.
1998-12-27 21:47:14 +00:00
net/if_spppsubr.c optional sppp
# needed by i4bipr
net/slcompress.c optional i4bipr
# tina-dd control driver
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
i4b/tina-dd/i4b_tina_dd.c optional tina
# support
i4b/layer2/i4b_mbuf.c optional i4btrc
Initial entry of ISDN4BSD into the FreeBSD tree. ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis, who has done a tremendous amount of work to bring us this far. There are still some outstanding issues and files to bring into the tree, and for now it will be needed to pick up all the extra docs from the isdn4bsd release. It is probably also a very good idea to subscribe to the isdn@freebsd.org mailing list before you try this out. These files correspond to release "beta Version 0.70.00 / December 1998" from Hellmuth.
1998-12-27 21:47:14 +00:00
# Q.921 handler
i4b/layer2/i4b_l2.c optional i4bq921
i4b/layer2/i4b_l2fsm.c optional i4bq921
i4b/layer2/i4b_uframe.c optional i4bq921
i4b/layer2/i4b_tei.c optional i4bq921
i4b/layer2/i4b_sframe.c optional i4bq921
i4b/layer2/i4b_iframe.c optional i4bq921
i4b/layer2/i4b_l2timer.c optional i4bq921
i4b/layer2/i4b_util.c optional i4bq921
i4b/layer2/i4b_lme.c optional i4bq921
# Q.931 handler
i4b/layer3/i4b_q931.c optional i4bq931
i4b/layer3/i4b_l3fsm.c optional i4bq931
i4b/layer3/i4b_l3timer.c optional i4bq931
i4b/layer3/i4b_l2if.c optional i4bq931
i4b/layer3/i4b_l4if.c optional i4bq931
i4b/layer3/i4b_q932fac.c optional i4bq931
# isdn device driver, interface to i4bd
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
i4b/layer4/i4b_i4bdrv.c optional i4b
i4b/layer4/i4b_l4.c optional i4b
i4b/layer4/i4b_l4mgmt.c optional i4b
i4b/layer4/i4b_l4timer.c optional i4b
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
isofs/cd9660/cd9660_bmap.c optional cd9660
isofs/cd9660/cd9660_lookup.c optional cd9660
isofs/cd9660/cd9660_node.c optional cd9660
isofs/cd9660/cd9660_rrip.c optional cd9660
isofs/cd9660/cd9660_util.c optional cd9660
isofs/cd9660/cd9660_vfsops.c optional cd9660
isofs/cd9660/cd9660_vnops.c optional cd9660
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
kern/imgact_aout.c standard
First attempt at FreeBSD & Linux ELF support. Compile and link a new kernel, that will give native ELF support, and provide the hooks for other ELF interpreters as well. To make native ELF binaries use John Polstras elf-kit-1.0.1.. For the time being also use his ld-elf.so.1 and put it in /usr/libexec. The Linux emulator has been enhanced to also run ELF binaries, it is however in its very first incarnation. Just get some Linux ELF libs (Slackware-3.0) and put them in the prober place (/compat/linux/...). I've ben able to run all the Slackware-3.0 binaries I've tried so far. (No it won't run quake yet :)
1996-03-10 08:42:54 +00:00
kern/imgact_elf.c standard
Changed the imgact_gzip to "optional gzip" per David Greenman's request.
1994-10-03 06:35:17 +00:00
kern/imgact_gzip.c optional gzip
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
kern/imgact_shell.c standard
Add kern/subr_diskslice.c, kern/subr_dkbad.c. Sort.
1994-12-11 23:34:42 +00:00
kern/inflate.c optional gzip
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/init_main.c standard
kern/init_sysent.c standard
Oops, wrong file again.
1998-06-14 17:35:55 +00:00
kern/kern_intr.c standard
This is the kernel linker. To use it, you will first need to apply the patches in freefall:/home/dfr/ld.diffs to your ld sources and set BINFORMAT to aoutkld when linking the kernel. Library changes and userland utilities will appear in a later commit.
1997-05-07 16:05:47 +00:00
kern/kern_module.c standard
kern/kern_linker.c standard
kern/link_aout.c standard
Remove DDB_ELF_SYMBOLS and DDB_KLD_SYMBOLS options. KLD will be the sole interface to symbols in an elf kernel.
1998-10-09 23:26:26 +00:00
kern/link_elf.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_acct.c standard
kern/kern_clock.c standard
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
kern/kern_conf.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_descrip.c standard
New files for kernel environment and module metadata interfaces.
1998-10-09 00:30:50 +00:00
kern/kern_environment.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_exec.c standard
kern/kern_exit.c standard
kern/kern_fork.c standard
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
kern/kern_jail.c standard
Slight reorganization of kernel thread/process creation. Instead of using SYSINIT_KT() etc (which is a static, compile-time procedure), use a NetBSD-style kthread_create() interface. kproc_start is still available as a SYSINIT() hook. This allowed simplification of chunks of the sysinit code in the process. This kthread_create() is our old kproc_start internals, with the SYSINIT_KT fork hooks grafted in and tweaked to work the same as the NetBSD one. One thing I'd like to do shortly is get rid of nfsiod as a user initiated process. It makes sense for the nfs client code to create them on the fly as needed up to a user settable limit. This means that nfsiod doesn't need to be in /sbin and is always "available". This is a fair bit easier to do outside of the SYSINIT_KT() framework.
1999-07-01 13:21:46 +00:00
kern/kern_kthread.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_ktrace.c standard
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
kern/kern_lock.c standard
Sorted.
1994-09-20 15:55:09 +00:00
kern/kern_lockf.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_malloc.c standard
Move the "mib" variables out to their own file.
1996-04-07 13:03:06 +00:00
kern/kern_mib.c standard
Redo Kernel NTP PLL support, kernel side. This code is mostly taken from the 1.1 port (which was in turn taken from Dave Mills's kern.tar.Z example). A few significant differences: 1) ntp_gettime() is now a MIB variable rather than a system call. A few fiddles are done in libc to make it behave the same. 2) mono_time does not participate in the PLL adjustments. 3) A new interface has been defined (in <machine/clock.h>) for doing possibly machine-dependent things around the time of the clock update. This is used in Pentium kernels to disable interrupts, set `time', and reset the CPU cycle counter as quickly as possible to avoid jitter in microtime(). Measurements show an apparent resolution of a bit more than 8.14usec, which is reasonable given system-call overhead.
1994-09-18 20:40:01 +00:00
kern/kern_ntptime.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_physio.c standard
kern/kern_proc.c standard
kern/kern_prot.c standard
kern/kern_resource.c standard
having checked in the file I probably should check in the entry for kern_shutdown.c if I want anyone to be able to compile a kernel
1996-08-20 03:54:13 +00:00
kern/kern_shutdown.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_sig.c standard
kern/kern_subr.c standard
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
kern/kern_switch.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_synch.c standard
Add kern_syscalls.c Submitted by: Assar Westerlund <assar@sics.se>
1999-01-16 17:29:56 +00:00
kern/kern_syscalls.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_sysctl.c standard
kern/kern_time.c standard
Effect the divorce of kern_clock.c and kern_timeout.c (which was repository copied from kern_clock.c)
1998-01-10 13:16:26 +00:00
kern/kern_timeout.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/kern_xxx.c standard
Export MD5Transform in md5.c and remove a private version in random_machdep.c md5 is standard as a consequence of this.
1998-03-29 11:55:06 +00:00
kern/md5c.c standard
Move the rules for aicasm to the MI conf file. Add kern/subr_autoconf.c as a standard file as it contains the bulk of the code for performing interrupt driven configuration.
1997-09-21 21:32:04 +00:00
kern/subr_autoconf.c standard
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
kern/subr_bus.c standard
Update for CAM.
1998-09-15 09:59:15 +00:00
kern/subr_devstat.c standard
Add micro "disk" layer which should enable us to pull all the slice/label stuff out of the device drivers.
1999-08-29 13:28:55 +00:00
kern/subr_disk.c standard
Update for CAM.
1998-09-15 09:59:15 +00:00
kern/subr_diskslice.c standard
Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c needed a diskslice function yesterday and all disk drivers will need it. The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
kern/subr_dkbad.c standard
Implement a new generic mechanism for attaching handler functions to events, in order to pave the way for removing a number of the ad-hoc implementations currently in use. Retire the at_shutdown family of functions and replace them with new event handler lists. Rework kern_shutdown.c to take greater advantage of the use of event handlers. Reviewed by: green
1999-08-21 06:24:40 +00:00
kern/subr_eventhandler.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/subr_log.c standard
New files for kernel environment and module metadata interfaces.
1998-10-09 00:30:50 +00:00
kern/subr_module.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/subr_prf.c standard
kern/subr_prof.c standard
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
kern/subr_blist.c standard
Add sscanf/vsscanf/strtoq/strtouq to the kernel. Initially these will be used for parsing kernel environment values, although they have utility elsewhere.
1999-01-15 00:03:39 +00:00
kern/subr_scanf.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/subr_xxx.c standard
kern/sys_generic.c standard
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
kern/sys_pipe.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/sys_process.c standard
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
kern/subr_rman.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/sys_socket.c standard
sysv_ipc.c now "standard" as it contains #if defined(...) blocks of code that handle the various permutations of SYSV options. sysv_shm.c etc (the implementations) are still optional, this is just a file of stubs and an optional utility function.
1996-01-08 04:39:20 +00:00
kern/sysv_ipc.c standard
Added back the SYSV ipc files which somehow got removed.
1994-09-15 16:47:50 +00:00
kern/sysv_msg.c optional sysvmsg
kern/sysv_sem.c optional sysvsem
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/sysv_shm.c optional sysvshm
kern/tty.c standard
kern/tty_compat.c standard
kern/tty_conf.c standard
Merge the cons.c and cons.h to the best of my ability. alpha may or may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
kern/tty_cons.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/tty_pty.c optional pty
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
kern/tty_snoop.c optional snp
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/tty_subr.c standard
kern/tty_tb.c optional tb
kern/tty_tty.c standard
kern/uipc_domain.c standard
kern/uipc_mbuf.c standard
kern/uipc_proto.c standard
kern/uipc_socket.c standard
kern/uipc_socket2.c standard
kern/uipc_syscalls.c standard
kern/uipc_usrreq.c standard
kern/vfs_bio.c standard
kern/vfs_cache.c standard
kern/vfs_cluster.c standard
kern/vfs_conf.c standard
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
kern/vfs_default.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
kern/vfs_init.c standard
kern/vfs_lookup.c standard
kern/vfs_subr.c standard
kern/vfs_syscalls.c standard
kern/vfs_vnops.c standard
Modifications to existing files to support the initial AIO/LIO and kernel based threading support.
1997-06-16 00:29:36 +00:00
kern/kern_threads.c standard
kern/vfs_aio.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
miscfs/deadfs/dead_vnops.c standard
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
miscfs/devfs/devfs_tree.c optional devfs
miscfs/devfs/devfs_vfsops.c optional devfs
miscfs/devfs/devfs_vnops.c optional devfs
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
miscfs/fdesc/fdesc_vfsops.c optional fdesc
miscfs/fdesc/fdesc_vnops.c optional fdesc
More loadable VFS changes: - Make a number of filesystems work again when they are statically compiled (blush) - FIFOs are no longer optional; ``options FIFO'' removed from distributed config files.
1994-09-22 19:38:41 +00:00
miscfs/fifofs/fifo_vnops.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
miscfs/kernfs/kernfs_vfsops.c optional kernfs
miscfs/kernfs/kernfs_vnops.c optional kernfs
miscfs/nullfs/null_subr.c optional nullfs
miscfs/nullfs/null_vfsops.c optional nullfs
miscfs/nullfs/null_vnops.c optional nullfs
miscfs/portal/portal_vfsops.c optional portal
miscfs/portal/portal_vnops.c optional portal
miscfs/procfs/procfs_ctl.c optional procfs
Implement support for hardware debug registers on the i386. Submitted by: Brian Dean <brdean@unx.sas.com>
1999-07-09 04:16:00 +00:00
miscfs/procfs/procfs_dbregs.c standard
procfs_{mem|regs|fpregs}.c are now completely shared with ptrace(), and are no longer optional. This cuts down some code duplication.
1996-01-24 18:44:42 +00:00
miscfs/procfs/procfs_fpregs.c standard
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
miscfs/procfs/procfs_map.c optional procfs
procfs_{mem|regs|fpregs}.c are now completely shared with ptrace(), and are no longer optional. This cuts down some code duplication.
1996-01-24 18:44:42 +00:00
miscfs/procfs/procfs_mem.c standard
Sorted.
1994-09-20 15:55:09 +00:00
miscfs/procfs/procfs_note.c optional procfs
procfs_{mem|regs|fpregs}.c are now completely shared with ptrace(), and are no longer optional. This cuts down some code duplication.
1996-01-24 18:44:42 +00:00
miscfs/procfs/procfs_regs.c standard
Sorted.
1994-09-20 15:55:09 +00:00
miscfs/procfs/procfs_status.c optional procfs
miscfs/procfs/procfs_subr.c optional procfs
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
miscfs/procfs/procfs_type.c optional procfs
Sorted.
1994-09-20 15:55:09 +00:00
miscfs/procfs/procfs_vfsops.c optional procfs
miscfs/procfs/procfs_vnops.c optional procfs
Add a new "file" to procfs: "rlimit" which shows the resource limits for the process. PR: 11342 Submitted by: Adrian Chadd adrian@freebsd.org Reviewed by: phk
1999-04-30 13:04:21 +00:00
miscfs/procfs/procfs_rlimit.c optional procfs
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
miscfs/specfs/spec_vnops.c standard
miscfs/umapfs/umap_subr.c optional umapfs
miscfs/umapfs/umap_vfsops.c optional umapfs
miscfs/umapfs/umap_vnops.c optional umapfs
miscfs/union/union_subr.c optional union
miscfs/union/union_vfsops.c optional union
miscfs/union/union_vnops.c optional union
Sorted.
1994-09-20 15:55:09 +00:00
msdosfs/msdosfs_conv.c optional msdosfs
msdosfs/msdosfs_denode.c optional msdosfs
msdosfs/msdosfs_fat.c optional msdosfs
msdosfs/msdosfs_lookup.c optional msdosfs
msdosfs/msdosfs_vfsops.c optional msdosfs
msdosfs/msdosfs_vnops.c optional msdosfs
Add new kernel option: options NTFS
1999-03-02 20:26:02 +00:00
ntfs/ntfs_vfsops.c optional ntfs
ntfs/ntfs_vnops.c optional ntfs
ntfs/ntfs_subr.c optional ntfs
ntfs/ntfs_compr.c optional ntfs
ntfs/ntfs_ihash.c optional ntfs
Allow loadable interface drivers with BPF support to be loaded into a kernel that doesn't have it. This is achieved by having minimal do-nothing stubs enabled when there are no bpfilter devices configured. Driver modules should be built with BPF enabled for maximum convenience (but can be built without it for maximum performance).
1999-04-28 01:18:13 +00:00
net/bpf.c standard
Rename bpfilter to bpf.
1999-07-06 19:23:32 +00:00
net/bpf_filter.c optional bpf
Bring dummynet+bridging in -current. Everything will be ready when LINT is updated.
1998-12-14 17:46:15 +00:00
net/bridge.c optional bridge
Use two NetBSD-style options (PPP_DEFLATE and PPP_BSDCOMP) to control whether or not to compile the two ppp compression methods.
1997-08-19 17:05:26 +00:00
net/bsd_comp.c optional ppp_bsdcomp
Add preliminary support for IEEE 802.1Q VLAN tagging. It doesn't actually work reliably yet (I've had panics), but it does seem to occasionally be able to transmit and receive syntactically-correct packets. Also fixes one of if_ethersubr.c's legion style bugs, and removes the hostcache code from standard kernels---the code that depends on it is not going to happen any time soon, I'm afraid.
1998-03-18 01:40:12 +00:00
#net/hostcache.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
net/if.c standard
merge ATM driver
1997-05-09 12:19:06 +00:00
net/if_atmsubr.c optional atm
Added `ds', a black-hole network interface.
1994-12-22 21:00:05 +00:00
net/if_disc.c optional disc
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
net/if_ethersubr.c optional ether
World, I'd like you to meet the first FreeBSD token Ring driver. This is for various Olicom cards. An IBM driver is following. This patch also adds support to tcpdump to decode packets on tokenring. Congratulations to the proud father.. (below) Submitted by: Larry Lile <lile@stdio.com>
1999-02-20 11:18:00 +00:00
net/if_iso88025subr.c optional token
Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters. Submitted by: Matt Thomas
1995-03-14 09:16:07 +00:00
net/if_fddisubr.c optional fddi
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
net/if_loop.c optional loop
add net/if_media.c
1997-05-03 21:06:00 +00:00
net/if_media.c standard
Add better support for retrieving management information from network interfaces. This creates two new tables in the net.link.generic branch of the MIB; one contains (essentially) `ifdata' structures, and the other contains a blob provided by the interface (and presumably used to implement link-layer-specific MIB variables). A number of things have been moved around in the `ifnet' and `ifdata' structures, so NEW VERSIONS OF ifconfig(8) AND routed(8) ARE REQUIRED. (A simple recompile is all that's necessary.) I have a sample program which uses this interface for those interested in making use of it.
1996-07-30 19:17:07 +00:00
net/if_mib.c standard
Add PPP. NB: this is VERY VERY VERY green code, added to make it easier to test things out. It compiles, but I don't know if it works (yet).
1994-09-23 00:14:11 +00:00
net/if_ppp.c optional ppp
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
net/if_sl.c optional sl
Add kern/subr_diskslice.c, kern/subr_dkbad.c. Sort.
1994-12-11 23:34:42 +00:00
net/if_spppsubr.c optional sppp
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
net/if_tun.c optional tun
Add preliminary support for IEEE 802.1Q VLAN tagging. It doesn't actually work reliably yet (I've had panics), but it does seem to occasionally be able to transmit and receive syntactically-correct packets. Also fixes one of if_ethersubr.c's legion style bugs, and removes the hostcache code from standard kernels---the code that depends on it is not going to happen any time soon, I'm afraid.
1998-03-18 01:40:12 +00:00
net/if_vlan.c optional vlan
Use two NetBSD-style options (PPP_DEFLATE and PPP_BSDCOMP) to control whether or not to compile the two ppp compression methods.
1997-08-19 17:05:26 +00:00
net/ppp_deflate.c optional ppp_deflate
Update the file list for the new ppp files..
1995-10-31 20:33:23 +00:00
net/ppp_tty.c optional ppp
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
net/radix.c standard
net/raw_cb.c standard
net/raw_usrreq.c standard
net/route.c standard
net/rtsock.c standard
Update the file list for the new ppp files..
1995-10-31 20:33:23 +00:00
net/slcompress.c optional ppp
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
net/slcompress.c optional sl
Use two NetBSD-style options (PPP_DEFLATE and PPP_BSDCOMP) to control whether or not to compile the two ppp compression methods.
1997-08-19 17:05:26 +00:00
net/zlib.c optional ppp_deflate
Obtained from: netatalk distribution netatalk@itd.umich.edu Kernel Appletalk protocol support both CAP and netatalk can make use of this.. still needs some owrk but it seemd the right tiime to commit it so other can experiment.
1996-05-24 01:35:45 +00:00
netatalk/aarp.c optional netatalk
netatalk/at_control.c optional netatalk
netatalk/at_proto.c optional netatalk
netatalk/at_rmx.c optional netatalkdebug
netatalk/ddp_input.c optional netatalk
netatalk/ddp_output.c optional netatalk
netatalk/ddp_usrreq.c optional netatalk
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
netatm/atm_aal5.c optional atm_core
netatm/atm_cm.c optional atm_core
netatm/atm_device.c optional atm_core
netatm/atm_if.c optional atm_core
netatm/atm_proto.c optional atm_core
netatm/atm_signal.c optional atm_core
netatm/atm_socket.c optional atm_core
netatm/atm_subr.c optional atm_core
netatm/atm_usrreq.c optional atm_core
netatm/ipatm/ipatm_event.c optional atm_ip atm_core
netatm/ipatm/ipatm_if.c optional atm_ip atm_core
netatm/ipatm/ipatm_input.c optional atm_ip atm_core
netatm/ipatm/ipatm_load.c optional atm_ip atm_core
netatm/ipatm/ipatm_output.c optional atm_ip atm_core
netatm/ipatm/ipatm_usrreq.c optional atm_ip atm_core
netatm/ipatm/ipatm_vcm.c optional atm_ip atm_core
netatm/sigpvc/sigpvc_if.c optional atm_sigpvc atm_core
netatm/sigpvc/sigpvc_subr.c optional atm_sigpvc atm_core
Add some missing dependencies. Grumbled about in principle: bde
1998-10-25 07:23:32 +00:00
netatm/spans/spans_arp.c optional atm_spans atm_core \
dependency "spans_xdr.h"
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
netatm/spans/spans_cls.c optional atm_spans atm_core
netatm/spans/spans_if.c optional atm_spans atm_core
netatm/spans/spans_kxdr.c optional atm_spans atm_core
netatm/spans/spans_msg.c optional atm_spans atm_core
netatm/spans/spans_print.c optional atm_spans atm_core
netatm/spans/spans_proto.c optional atm_spans atm_core
netatm/spans/spans_subr.c optional atm_spans atm_core
netatm/spans/spans_util.c optional atm_spans atm_core
spans_xdr.h optional atm_spans atm_core \
before-depend \
dependency "$S/netatm/spans/spans_xdr.x" \
compile-with "rpcgen -h -C $S/netatm/spans/spans_xdr.x > spans_xdr.h" \
clean "spans_xdr.h" \
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
no-obj no-implicit-rule
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
spans_xdr.c optional atm_spans atm_core \
before-depend \
dependency "$S/netatm/spans/spans_xdr.x" \
compile-with "rpcgen -c -C $S/netatm/spans/spans_xdr.x > spans_xdr.c" \
clean "spans_xdr.c" \
no-obj no-implicit-rule local
spans_xdr.o optional atm_spans atm_core \
dependency "$S/netatm/spans/spans_xdr.x" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
netatm/uni/q2110_sigaa.c optional atm_uni atm_core
netatm/uni/q2110_sigcpcs.c optional atm_uni atm_core
netatm/uni/q2110_subr.c optional atm_uni atm_core
netatm/uni/qsaal1_sigaa.c optional atm_uni atm_core
netatm/uni/qsaal1_sigcpcs.c optional atm_uni atm_core
netatm/uni/qsaal1_subr.c optional atm_uni atm_core
netatm/uni/sscf_uni.c optional atm_uni atm_core
netatm/uni/sscf_uni_lower.c optional atm_uni atm_core
netatm/uni/sscf_uni_upper.c optional atm_uni atm_core
netatm/uni/sscop.c optional atm_uni atm_core
netatm/uni/sscop_lower.c optional atm_uni atm_core
netatm/uni/sscop_pdu.c optional atm_uni atm_core
netatm/uni/sscop_sigaa.c optional atm_uni atm_core
netatm/uni/sscop_sigcpcs.c optional atm_uni atm_core
netatm/uni/sscop_subr.c optional atm_uni atm_core
netatm/uni/sscop_timer.c optional atm_uni atm_core
netatm/uni/sscop_upper.c optional atm_uni atm_core
netatm/uni/uni_load.c optional atm_uni atm_core
netatm/uni/uniarp.c optional atm_uni atm_core
netatm/uni/uniarp_cache.c optional atm_uni atm_core
netatm/uni/uniarp_input.c optional atm_uni atm_core
netatm/uni/uniarp_output.c optional atm_uni atm_core
netatm/uni/uniarp_timer.c optional atm_uni atm_core
netatm/uni/uniarp_vcm.c optional atm_uni atm_core
netatm/uni/uniip.c optional atm_uni atm_core
netatm/uni/unisig_decode.c optional atm_uni atm_core
netatm/uni/unisig_encode.c optional atm_uni atm_core
netatm/uni/unisig_if.c optional atm_uni atm_core
netatm/uni/unisig_mbuf.c optional atm_uni atm_core
netatm/uni/unisig_msg.c optional atm_uni atm_core
netatm/uni/unisig_print.c optional atm_uni atm_core
netatm/uni/unisig_proto.c optional atm_uni atm_core
netatm/uni/unisig_sigmgr_state.c optional atm_uni atm_core
netatm/uni/unisig_subr.c optional atm_uni atm_core
netatm/uni/unisig_util.c optional atm_uni atm_core
netatm/uni/unisig_vc_state.c optional atm_uni atm_core
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/fil.c optional ipfilter inet
merge ATM driver
1997-05-09 12:19:06 +00:00
netinet/if_atm.c optional atm
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
netinet/if_ether.c optional ether
netinet/igmp.c optional inet
netinet/in.c optional inet
Add preliminary support for IEEE 802.1Q VLAN tagging. It doesn't actually work reliably yet (I've had panics), but it does seem to occasionally be able to transmit and receive syntactically-correct packets. Also fixes one of if_ethersubr.c's legion style bugs, and removes the hostcache code from standard kernels---the code that depends on it is not going to happen any time soon, I'm afraid.
1998-03-18 01:40:12 +00:00
#netinet/in_hostcache.c optional inet
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
netinet/in_pcb.c optional inet
netinet/in_proto.c optional inet
Advanced route cache management is now an official part of IP support.
1994-12-11 21:36:10 +00:00
netinet/in_rmx.c optional inet
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/ip_auth.c optional ipfilter inet
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
netinet/ip_divert.c optional ipdivert
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
netinet/ip_dummynet.c optional dummynet
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/ip_fil.c optional ipfilter inet
Added fast IP forwarding code by Matt Thomas <matt@3am-software.com> via NetBSD, ported to FreeBSD by Pierre Beyssac <pb@fasterix.freenix.org> and minorly tweaked by me. This is a standard part of FreeBSD, but must be enabled with: "sysctl -w net.inet.ip.fastforwarding=1" ...and of course forwarding must also be enabled. This should probably be modified to use the zone allocator for speed and space efficiency. The current algorithm also appears to lose if the number of active paths exceeds IPFLOW_MAX (256), in which case it wastes lots of time trying to figure out which cache entry to drop.
1998-05-19 14:04:36 +00:00
netinet/ip_flow.c optional inet
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/ip_frag.c optional ipfilter inet
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
netinet/ip_fw.c optional ipfirewall
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
netinet/ip_icmp.c optional inet
netinet/ip_input.c optional inet
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/ip_log.c optional ipfilter inet
Shuffle some functions and variables around to make it possible for multicast routing to be implemented as an LKM. (There's still a bit of work to do in this area.)
1994-09-14 03:10:15 +00:00
netinet/ip_mroute.c optional inet
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/ip_nat.c optional ipfilter inet
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
netinet/ip_output.c optional inet
Make this compile.. There are some unpleasing hacks in here. A major unifdef session is sorely tempting but would destroy any remaining chance of tracking the original sources.
1998-03-21 11:34:28 +00:00
netinet/ip_proxy.c optional ipfilter inet
netinet/ip_state.c optional ipfilter inet
netinet/mlf_ipl.c optional ipfilter inet
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
netinet/raw_ip.c optional inet
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
netinet/tcp_debug.c optional tcpdebug
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
netinet/tcp_input.c optional inet
netinet/tcp_output.c optional inet
netinet/tcp_subr.c optional inet
netinet/tcp_timer.c optional inet
netinet/tcp_usrreq.c optional inet
netinet/udp_usrreq.c optional inet
Reviewed by: julian and jhay@mikom.csir.co.za Submitted by: Mike Mitchell, supervisor@alb.asctmd.com This is a bulk mport of Mike's IPX/SPX protocol stacks and all the related gunf that goes with it.. it is not guaranteed to work 100% correctly at this time but as we had several people trying to work on it I figured it would be better to get it checked in so they could all get teh same thing to work on.. Mikes been using it for a year or so but on 2.0 more changes and stuff will be merged in from other developers now that this is in. Mike Mitchell, Network Engineer AMTECH Systems Corporation, Technology and Manufacturing 8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000 supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
netipx/ipx.c optional ipx
netipx/ipx_cksum.c optional ipx
netipx/ipx_input.c optional ipx
netipx/ipx_ip.c optional ipx
netipx/ipx_outputfl.c optional ipx
netipx/ipx_pcb.c optional ipx
netipx/ipx_proto.c optional ipx
netipx/ipx_tun.c optional ipx
Sorted and fixed tabs. The only excuse this had for becoming misordered was that some drivers were sorted on the driver name field, but the ffs versus mfs ordering shows that this is not a consistent order. The only case that I know of where simple sorting is wrong is for files that must be compiled without profiling if profiling is configured and normally otherwise. Then the line with `profiling-routine' must appear first to get the file compiled with ${PROFILE_C}.
1996-08-28 17:19:04 +00:00
netipx/ipx_usrreq.c optional ipx
Reviewed by: julian and jhay@mikom.csir.co.za Submitted by: Mike Mitchell, supervisor@alb.asctmd.com This is a bulk mport of Mike's IPX/SPX protocol stacks and all the related gunf that goes with it.. it is not guaranteed to work 100% correctly at this time but as we had several people trying to work on it I figured it would be better to get it checked in so they could all get teh same thing to work on.. Mikes been using it for a year or so but on 2.0 more changes and stuff will be merged in from other developers now that this is in. Mike Mitchell, Network Engineer AMTECH Systems Corporation, Technology and Manufacturing 8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000 supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
netipx/spx_debug.c optional ipx
netipx/spx_usrreq.c optional ipx
This is the `netkey' kernel key-management service (the PF_KEY analogue to PF_ROUTE) from NRL's IPv6 distribution, heavily modified by me for better source layout, formatting, and textual conventions. I am told that this code is no longer under active development, but it's a useful hack for those interested in doing work on network security, key management, etc. This code has only been tested twice, so it should be considered highly experimental. Obtained from: ftp.ripe.net
1996-06-14 17:22:18 +00:00
netkey/key.c optional key
make sys/netkey/key{,_debug}.c compile. I believe it works but not tested. I'll polish the code later on.
1998-02-27 10:02:49 +00:00
netkey/key_debug.c optional key_debug
merge ATM driver
1997-05-09 12:19:06 +00:00
netnatm/natm.c optional natm
netnatm/natm_pcb.c optional natm
netnatm/natm_proto.c optional natm
Removed entries for dead SLICE files. Removed commented out entries for dead networking files (netccitt etc.). Uncommented entries for zombie networking files (netns).
1998-09-20 06:17:49 +00:00
netns/idp_usrreq.c optional ns
netns/ns.c optional ns
netns/ns_error.c optional ns
netns/ns_input.c optional ns
netns/ns_ip.c optional ns
netns/ns_output.c optional ns
netns/ns_pcb.c optional ns
netns/ns_proto.c optional ns
netns/spp_debug.c optional ns
netns/spp_usrreq.c optional ns
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
nfs/nfs_bio.c optional nfs
nfs/nfs_node.c optional nfs
nfs/nfs_nqlease.c optional nfs
nfs/nfs_serv.c optional nfs
nfs/nfs_socket.c optional nfs
nfs/nfs_srvcache.c optional nfs
nfs/nfs_subs.c optional nfs
nfs/nfs_syscalls.c optional nfs
nfs/nfs_vfsops.c optional nfs
nfs/nfs_vnops.c optional nfs
Bring in some kernel bootp support. This removes the need for netboot to fill in the nfs_diskless structure, at the cost of some kernel bloat. The advantage is that this code works on a wider range of network adapters than netboot. Several new kernel options are documented in LINT. Obtained from: parts of the code comes from NetBSD.
1997-05-11 18:05:39 +00:00
nfs/bootp_subr.c optional bootp
nfs/krpc_subr.c optional bootp
- Do a bunch of gratuitous changes intended to make the code easier to follow. * Rename/reorder all of the pccard structures, change many of the member names to be descriptive, and follow more closely other 'bus' drivers naming schemes. * Rename a bunch of parameter and local variable names to be more consistant in the code. * Renamed the PCCARD 'crd' device to be the 'card' device * KNF and make the code consistant where it was obvious. * ifdef'd out some unused code
1997-10-26 04:36:24 +00:00
pccard/pccard.c optional card
- 'Beep' support now happens in it's own separate file, so you can mess around with different noises for the different events and not have it affect other files. Inspired by: PAO
1997-10-26 06:06:54 +00:00
pccard/pccard_beep.c optional card
add pccard/pccard_nbk.c
1999-09-06 11:36:25 +00:00
pccard/pccard_nbk.c optional card
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pccard/pcic.c optional pcic
pci/amd.c optional amd
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/pcic_p.c optional pcic pci
pci/adv_pci.c optional adv pci
pci/adw_pci.c optional adw pci
pci/ahc_pci.c optional ahc pci \
Update for CAM.
1998-09-15 09:59:15 +00:00
dependency "aic7xxx_reg.h $S/pci/ahc_pci.c"
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/brooktree848.c optional bktr pci
pci/bt848_i2c.c optional bktr pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/bt_pci.c optional bt pci
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/cy_pci.c optional cy pci
pci/dpt_pci.c optional dpt pci
pci/ida_pci.c optional ida pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/if_al.c optional al
pci/if_ax.c optional ax
pci/if_de.c optional de
This commit adds driver support for PCI fast ethernet NICs based on the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation XPressNet. Datasheet is available from www.davicom8.com. The DM910x chips are still more tulip clones. The API is reproduced pretty faithfully, unfortunately the performance is pretty bad. The transmitter seems to have a lot of problems DMAing multi-fragment packets. The only way to make it work reliably is to coalesce transmitted packets into a single contiguous buffer. The Linux driver (written by Davicom) actually does something similar to this. I can't recomment this NIC as anything more than a "connectivity solution." This driver uses newbus and miibus and is supported on both i386 and alpha platforms.
1999-09-06 06:14:30 +00:00
pci/if_dm.c optional dm
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/if_en_pci.c optional en pci
Fix unordering
1999-09-21 10:50:28 +00:00
pci/if_fpa.c optional fpa pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/if_fxp.c optional fxp
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/if_lnc_p.c optional lnc pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/if_mx.c optional mx
pci/if_pn.c optional pn
pci/if_rl.c optional rl
This commit adds device driver support for Adaptec Duralink PCI fast ethernet controllers based on the AIC-6915 "Starfire" controller chip. There are single port, dual port and quad port cards, plus one 100baseFX card. All are 64-bit PCI devices, except one single port model. The Starfire would be a very nice chip were it not for the fact that receive buffers have to be longword aligned. This requires buffer copying in order to achieve proper payload alignment on the alpha. Payload alignment is enforced on both the alpha and x86 platforms. The Starfire has several different DMA descriptor formats and transfer mechanisms. This driver uses frame descriptors for transmission which can address up to 14 packet fragments, and a single fragment descriptor for receive. It also uses the producer/consumer model and completion queues for both transmit and receive. The transmit ring has 128 descriptors and the receive ring has 256. This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus so that it can be compiled as a loadable kernel module. Support for BPF and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
pci/if_sf.c optional sf
Add a driver for the AMD AM79c873 10/100 PHY. By some strange coincidence, this PHY and the Davicom DM9101 have exactly the same register definitions. One of them is probably a clone of the other. I'm not sure which. This is needed for the Davicom DM9102 10/100 PCI ethernet driver which will be committed shortly.
1999-09-06 05:27:55 +00:00
pci/if_sis.c optional sis
This commit adds driver support for the SysKonnect SK-984x series gigabit ethernet adapters. This includes two single port cards (single mode and multimode fiber) and two dual port cards (also single mode and multimode fiber). SysKonnect is currently the only vendor with a dual port gigabit ethernet NIC. The ports on dual port adapters are treated as separate network interfaces. Thus, if you have an SK-9844 dual port SX card, you should have both sk0 and sk1 interfaces attached. Dual port cards are implemented using two XMAC II chips connected to a single SysKonnect GEnesis controller. Hence, dual port cards are really one PCI device, as opposed to two separate PCI devices connected through a PCI to PCI bridge. Note that SysKonnect's drivers use the two ports for failover purposes rather that as two separate interfaces, plus they don't support jumbo frames. This applies to their Linux driver too. :) Support is provided for hardware multicast filtering, BPF and jumbo frames. The SysKonnect cards support TCP checksum offload however this feature is not currently enabled (hopefully it will be once we get checksum offload support). There are still a few things that need to be implemeted, like the ability to communicate with the on-board LM80 voltage/temperature monitor, but I wanted to get the driver under CVS control and into -current so people could bang on it. A big thanks for SysKonnect for making all their programming info for these cards (and for their FDDI and token ring cards) available without NDA (see www.syskonnect.com).
1999-07-09 04:30:09 +00:00
pci/if_sk.c optional sk
This commit adds device driver support for the Sundance Technologies ST201 PCI fast ethernet controller. Currently, the only card I know that uses this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the only cards I have are samples sent to me by D-Link.) This driver is the first to make use of the miibus code once I'm sure it all works together nicely, I'll start converting the other drivers. The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design only with its own register layout. Support is provided for ifmedia, hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00
pci/if_ste.c optional ste
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/if_sr_p.c optional sr pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/if_ti.c optional ti
pci/if_tl.c optional tl
pci/if_tx.c optional tx
pci/if_vr.c optional vr
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/if_vx_pci.c optional vx pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/if_wb.c optional wb
pci/if_xl.c optional xl
pci/isp_pci.c optional isp
pci/intpm.c optional intpm
Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire files. config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
pci/meteor.c optional meteor pci
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/ncr.c optional ncr
pci/pci.c optional pci
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci/pci_compat.c optional pci
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) Obtained from: Most PCI specific files moved from sys/i386/pci to sys/pci. One PC specific file (pcibus.c) new in sys/i386/isa.
1995-02-01 23:01:54 +00:00
pci/pcisupport.c optional pci
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_if.o optional pci \
dependency "pci_if.c pci_if.h" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci_if.c optional pci \
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
dependency "$S/kern/makedevops.pl $S/pci/pci_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -c $S/pci/pci_if.m" \
no-obj no-implicit-rule before-depend local \
clean "pci_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci_if.h optional pci \
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
dependency "$S/kern/makedevops.pl $S/pci/pci_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -h $S/pci/pci_if.m" \
no-obj no-implicit-rule before-depend \
clean "pci_if.h"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/simos.c optional simos
pci/alpm.c optional alpm
pci/xrpu.c optional xrpu
The system call stubs for the sched_* system calls can't be optional. The kernel will now link but the new system calls can't be LKM'd in without the P1003_1B option - I will remove this option later.
1998-03-28 22:44:28 +00:00
posix4/posix4_mib.c standard
posix4/p1003_1b.c standard
Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and _KPOSIX_PRIORITY_SCHEDULING options to work. Changes: Change all "posix4" to "p1003_1b". Misnamed files are left as "posix4" until I'm told if I can simply delete them and add new ones; Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux; Add man pages for _POSIX_PRIORITY_SCHEDULING system calls; Add options to LINT; Minor fixes to P1003_1B code during testing.
1998-03-28 11:51:01 +00:00
posix4/ksched.c optional _kposix_priority_scheduling
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ufs/ffs/ffs_alloc.c optional ffs
ufs/ffs/ffs_alloc.c optional mfs
ufs/ffs/ffs_balloc.c optional ffs
ufs/ffs/ffs_balloc.c optional mfs
ufs/ffs/ffs_inode.c optional ffs
ufs/ffs/ffs_inode.c optional mfs
Fixed building of kernels without `options FFS'. ffs_softdep_stub.c is not optional, since several "standard" files in ufs/ufs reference it.
1998-03-19 13:01:50 +00:00
ufs/ffs/ffs_softdep_stub.c standard
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
ufs/ffs/ffs_softdep.c optional softupdates
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ufs/ffs/ffs_subr.c optional ffs
ufs/ffs/ffs_subr.c optional mfs
ufs/ffs/ffs_tables.c optional ffs
ufs/ffs/ffs_tables.c optional mfs
ufs/ffs/ffs_vfsops.c optional ffs
ufs/ffs/ffs_vfsops.c optional mfs
ufs/ffs/ffs_vnops.c optional ffs
ufs/ffs/ffs_vnops.c optional mfs
ufs/mfs/mfs_vfsops.c optional mfs
ufs/mfs/mfs_vnops.c optional mfs
ufs/ufs/ufs_bmap.c standard
ufs/ufs/ufs_disksubr.c standard
ufs/ufs/ufs_ihash.c standard
ufs/ufs/ufs_inode.c standard
ufs/ufs/ufs_lookup.c standard
ufs/ufs/ufs_quota.c standard
ufs/ufs/ufs_vfsops.c standard
ufs/ufs/ufs_vnops.c standard
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct proc or any VM system structure will have to be rebuilt!!! Much needed overhaul of the VM system. Included in this first round of changes: 1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages, haspage, and sync operations are supported. The haspage interface now provides information about clusterability. All pager routines now take struct vm_object's instead of "pagers". 2) Improved data structures. In the previous paradigm, there is constant confusion caused by pagers being both a data structure ("allocate a pager") and a collection of routines. The idea of a pager structure has escentially been eliminated. Objects now have types, and this type is used to index the appropriate pager. In most cases, items in the pager structure were duplicated in the object data structure and thus were unnecessary. In the few cases that remained, a un_pager structure union was created in the object to contain these items. 3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now be removed. For instance, vm_object_enter(), vm_object_lookup(), vm_object_remove(), and the associated object hash list were some of the things that were removed. 4) simple_lock's removed. Discussion with several people reveals that the SMP locking primitives used in the VM system aren't likely the mechanism that we'll be adopting. Even if it were, the locking that was in the code was very inadequate and would have to be mostly re-done anyway. The locking in a uni-processor kernel was a no-op but went a long way toward making the code difficult to read and debug. 5) Places that attempted to kludge-up the fact that we don't have kernel thread support have been fixed to reflect the reality that we are really dealing with processes, not threads. The VM system didn't have complete thread support, so the comments and mis-named routines were just wrong. We now use tsleep and wakeup directly in the lock routines, for instance. 6) Where appropriate, the pagers have been improved, especially in the pager_alloc routines. Most of the pager_allocs have been rewritten and are now faster and easier to maintain. 7) The pagedaemon pageout clustering algorithm has been rewritten and now tries harder to output an even number of pages before and after the requested page. This is sort of the reverse of the ideal pagein algorithm and should provide better overall performance. 8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup have been removed. Some other unnecessary casts have also been removed. 9) Some almost useless debugging code removed. 10) Terminology of shadow objects vs. backing objects straightened out. The fact that the vm_object data structure escentially had this backwards really confused things. The use of "shadow" and "backing object" throughout the code is now internally consistent and correct in the Mach terminology. 11) Several minor bug fixes, including one in the vm daemon that caused 0 RSS objects to not get purged as intended. 12) A "default pager" has now been created which cleans up the transition of objects to the "swap" type. The previous checks throughout the code for swp->pg_data != NULL were really ugly. This change also provides the rudiments for future backing of "anonymous" memory by something other than the swap pager (via the vnode pager, for example), and it allows the decision about which of these pagers to use to be made dynamically (although will need some additional decision code to do this, of course). 13) (dyson) MAP_COPY has been deprecated and the corresponding "copy object" code has been removed. MAP_COPY was undocumented and non- standard. It was furthermore broken in several ways which caused its behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will continue to work correctly, but via the slightly different semantics of MAP_PRIVATE. 14) (dyson) Sharing maps have been removed. It's marginal usefulness in a threads design can be worked around in other ways. Both #12 and #13 were done to simplify the code and improve readability and maintain- ability. (As were most all of these changes) TODO: 1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing this will reduce the vnode pager to a mere fraction of its current size. 2) Rewrite vm_fault and the swap/vnode pagers to use the clustering information provided by the new haspage pager interface. This will substantially reduce the overhead by eliminating a large number of VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be improved to provide both a "behind" and "ahead" indication of contiguousness. 3) Implement the extended features of pager_haspage in swap_pager_haspage(). It currently just says 0 pages ahead/behind. 4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps via a much more general mechanism that could also be used for disk striping of regular filesystems. 5) Do something to improve the architecture of vm_object_collapse(). The fact that it makes calls into the swap pager and knows too much about how the swap pager operates really bothers me. It also doesn't allow for collapsing of non-swap pager objects ("unnamed" objects backed by other pagers).
1995-07-13 08:48:48 +00:00
vm/default_pager.c standard
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
vm/device_pager.c standard
vm/swap_pager.c standard
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vm/vm_fault.c standard
vm/vm_glue.c standard
vm/vm_init.c standard
vm/vm_kern.c standard
vm/vm_map.c standard
vm/vm_meter.c standard
vm/vm_mmap.c standard
vm/vm_object.c standard
vm/vm_page.c standard
vm/vm_pageout.c standard
vm/vm_pager.c standard
vm/vm_swap.c standard
vm/vm_unix.c standard
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
vm/vnode_pager.c standard
Someone removed vm_zone.c from /sys/conf/files.
1998-01-27 01:54:25 +00:00
vm/vm_zone.c standard
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/streams/streams.c optional streams
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
#
# USB support
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
pci/uhci_pci.c optional uhci
pci/ohci_pci.c optional ohci
usb_if.o optional usb \
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
dependency "usb_if.c" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
usb_if.c optional usb \
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
dependency "$S/kern/makedevops.pl $S/dev/usb/usb_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -c $S/dev/usb/usb_if.m" \
no-obj no-implicit-rule before-depend local \
clean "usb_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
usb_if.h optional usb \
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
dependency "$S/kern/makedevops.pl $S/dev/usb/usb_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -h $S/dev/usb/usb_if.m" \
no-obj no-implicit-rule before-depend \
clean "usb_if.h"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
dev/usb/uhci.c optional uhci
dev/usb/ohci.c optional ohci
dev/usb/usb.c optional usb
dev/usb/usbdi.c optional usb
dev/usb/usbdi_util.c optional usb
#dev/usb/usb_mem.c optional usb
dev/usb/usb_subr.c optional usb
dev/usb/usb_quirks.c optional usb
dev/usb/hid.c optional usb
dev/usb/ugen.c optional ugen
dev/usb/uhid.c optional uhid
dev/usb/ums.c optional ums
dev/usb/ulpt.c optional ulpt
dev/usb/ukbd.c optional ukbd
dev/usb/umass.c optional umass
dev/usb/uhub.c optional usb
* Factor out the common code between the isa bus drivers for i386 and alpha. * Re-work the resource allocation code to use helper functions in subr_bus.c. * Add simple isa interface for manipulating the resource ranges which can be allocated and remove the code from isa_write_ivar() which was previously used for this purpose.
1999-05-22 15:18:28 +00:00
isa_if.o optional isa \
dependency "isa_if.c isa_if.h" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
isa_if.c optional isa \
* Factor out the common code between the isa bus drivers for i386 and alpha. * Re-work the resource allocation code to use helper functions in subr_bus.c. * Add simple isa interface for manipulating the resource ranges which can be allocated and remove the code from isa_write_ivar() which was previously used for this purpose.
1999-05-22 15:18:28 +00:00
dependency "$S/kern/makedevops.pl $S/isa/isa_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -c $S/isa/isa_if.m" \
no-obj no-implicit-rule before-depend local \
clean "isa_if.c"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
isa_if.h optional isa \
* Factor out the common code between the isa bus drivers for i386 and alpha. * Re-work the resource allocation code to use helper functions in subr_bus.c. * Add simple isa interface for manipulating the resource ranges which can be allocated and remove the code from isa_write_ivar() which was previously used for this purpose.
1999-05-22 15:18:28 +00:00
dependency "$S/kern/makedevops.pl $S/isa/isa_if.m" \
compile-with "perl5 $S/kern/makedevops.pl -h $S/isa/isa_if.m" \
no-obj no-implicit-rule before-depend \
clean "isa_if.h"
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
isa/isa_common.c optional isa
isa/isahint.c optional isa
This represents essentially a complete rewrite of the ISA PnP code. The new system is integrated with the ISA bus code more cleanly and allows the future addition of more enumerators such as PnPBIOS and ACPI. This commit also enables the new pcm driver since it is somewhat tied to the new PnP code.
1999-09-01 20:53:43 +00:00
isa/pnp.c optional pnp
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
isa/bt_isa.c optional bt isa
This represents essentially a complete rewrite of the ISA PnP code. The new system is integrated with the ISA bus code more cleanly and allows the future addition of more enumerators such as PnPBIOS and ACPI. This commit also enables the new pcm driver since it is somewhat tied to the new PnP code.
1999-09-01 20:53:43 +00:00
dev/pcm/sound.c optional pcm
dev/pcm/ac97.c optional pcm
dev/pcm/dsp.c optional pcm
dev/pcm/channel.c optional pcm
dev/pcm/feeder.c optional pcm
dev/pcm/fake.c optional pcm
dev/pcm/mixer.c optional pcm
dev/pcm/isa/mss.c optional pcm isa
dev/pcm/isa/sb.c optional pcm isa
dev/pcm/pci/es1370.c optional pcm pci
dev/pcm/pci/t4dwave.c optional pcm pci
disable the aureal vortex driver for now
1999-09-04 18:59:47 +00:00
#dev/pcm/pci/aureal.c optional pcm pci
This is the rest of the MCA support; new_bus code to be exact. Should we ever find ourselves on an RS/6000 this code should work with few changes.
1999-09-03 03:40:00 +00:00
dev/mca/mca_bus.c optional mca
This adds support for the Buslogic/Bustek/Storage Dimensions MCA SCSI adapters. bt_mca.c is going to live in sys/dev/buslogic instead of sys/dev/mca as per a conversation with Peter, Doug and Mike. Thanks to Andy Farkas <andyf@speednet.com.au> for being such a good sport and doing all the testing for me (as I don't actually own one of these cards. Yet.)
1999-09-03 03:50:55 +00:00
dev/buslogic/bt_mca.c optional bt mca
Reference in New Issue Copy Permalink