d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1a2e6a635f
freebsd-dev/config/kernel.m4

429 lines
12 KiB
Plaintext
Raw Normal View History

Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
dnl #
dnl # Default ZFS kernel configuration
dnl #
AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
ZFS_AC_KERNEL
ZFS_AC_SPL
ZFS_AC_KERNEL_CONFIG
ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS
ZFS_AC_KERNEL_TYPE_FMODE_T
ZFS_AC_KERNEL_KOBJ_NAME_LEN
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
ZFS_AC_KERNEL_BLKDEV_GET_BY_PATH
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_OPEN_BDEV_EXCLUSIVE
ZFS_AC_KERNEL_INVALIDATE_BDEV_ARGS
ZFS_AC_KERNEL_BDEV_LOGICAL_BLOCK_SIZE
ZFS_AC_KERNEL_BIO_EMPTY_BARRIER
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
ZFS_AC_KERNEL_BIO_FAILFAST
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
ZFS_AC_KERNEL_BIO_FAILFAST_DTD
ZFS_AC_KERNEL_REQ_FAILFAST_MASK
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BIO_END_IO_T_ARGS
Linux 2.6.36 compat, synchronous bio flag The name of the flag used to mark a bio as synchronous has changed again in the 2.6.36 kernel due to the unification of the BIO_RW_* and REQ_* flags. The new flag is called REQ_SYNC. To simplify checking this flag I have introduced the vdev_disk_dio_is_sync() helper function. Based on the results of several new autoconf tests it uses the correct mask to check for a synchronous bio. Preferred interface for flagging a synchronous bio: 2.6.12-2.6.29: BIO_RW_SYNC 2.6.30-2.6.35: BIO_RW_SYNCIO 2.6.36-2.6.xx: REQ_SYNC
2010-11-10 23:49:40 +00:00
ZFS_AC_KERNEL_BIO_RW_SYNC
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BIO_RW_SYNCIO
Linux 2.6.36 compat, synchronous bio flag The name of the flag used to mark a bio as synchronous has changed again in the 2.6.36 kernel due to the unification of the BIO_RW_* and REQ_* flags. The new flag is called REQ_SYNC. To simplify checking this flag I have introduced the vdev_disk_dio_is_sync() helper function. Based on the results of several new autoconf tests it uses the correct mask to check for a synchronous bio. Preferred interface for flagging a synchronous bio: 2.6.12-2.6.29: BIO_RW_SYNC 2.6.30-2.6.35: BIO_RW_SYNCIO 2.6.36-2.6.xx: REQ_SYNC
2010-11-10 23:49:40 +00:00
ZFS_AC_KERNEL_REQ_SYNC
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BLK_END_REQUEST
ZFS_AC_KERNEL_BLK_FETCH_REQUEST
ZFS_AC_KERNEL_BLK_REQUEUE_REQUEST
ZFS_AC_KERNEL_BLK_RQ_BYTES
ZFS_AC_KERNEL_BLK_RQ_POS
ZFS_AC_KERNEL_BLK_RQ_SECTORS
ZFS_AC_KERNEL_GET_DISK_RO
ZFS_AC_KERNEL_RQ_IS_SYNC
ZFS_AC_KERNEL_RQ_FOR_EACH_SEGMENT
Linux 2.6.35 compat, const struct xattr_handler The const keyword was added to the 'struct xattr_handler' in the generic Linux super_block structure. To handle this we define an appropriate xattr_handler_t typedef which can be used. This was the preferred solution because it keeps the code clean and readable.
2011-02-11 00:16:52 +00:00
ZFS_AC_KERNEL_CONST_XATTR_HANDLER
Linux 2.6.33 compat, get/set xattr callbacks The xattr handler prototypes were sanitized with the idea being that the same handlers could be used for multiple methods. The result of this was the inode type was changes to a dentry, and both the get() and set() hooks had a handler_flags argument added. The list() callback was similiarly effected but no autoconf check was added because we do not use the list() callback.
2011-02-11 18:33:01 +00:00
ZFS_AC_KERNEL_XATTR_HANDLER_GET
ZFS_AC_KERNEL_XATTR_HANDLER_SET
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
ZFS_AC_KERNEL_FSYNC_2ARGS
Linux 2.6.36 compat, sops->evict_inode() The new prefered inteface for evicting an inode from the inode cache is the ->evict_inode() callback. It replaces both the ->delete_inode() and ->clear_inode() callbacks which were previously used for this.
2011-02-11 21:46:10 +00:00
ZFS_AC_KERNEL_EVICT_INODE
Linux 2.6.28 compat, insert_inode_locked() Added insert_inode_locked() helper function, prior to this most callers used insert_inode_hash(). The older method doesn't check for collisions in the inode_hashtable but it still acceptible for use. Fallback to using insert_inode_hash() when insert_inode_locked() is unavailable.
2011-03-22 16:55:09 +00:00
ZFS_AC_KERNEL_INSERT_INODE_LOCKED
Implemented NFS export_operations. Implemented the required NFS operations for exporting ZFS datasets using the in-kernel NFS daemon.
2011-04-28 16:35:50 +00:00
ZFS_AC_KERNEL_D_OBTAIN_ALIAS
Fix 'zfs set volsize=N pool/dataset' This change fixes a kernel panic which would occur when resizing a dataset which was not open. The objset_t stored in the zvol_state_t will be set to NULL when the block device is closed. To avoid this issue we pass the correct objset_t as the third arg. The code has also been updated to correctly notify the kernel when the block device capacity changes. For 2.6.28 and newer kernels the capacity change will be immediately detected. For earlier kernels the capacity change will be detected when the device is next opened. This is a known limitation of older kernels. Online ext3 resize test case passes on 2.6.28+ kernels: $ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023 $ zpool create tank /tmp/zvol $ zfs create -V 500M tank/zd0 $ mkfs.ext3 /dev/zd0 $ mkdir /mnt/zd0 $ mount /dev/zd0 /mnt/zd0 $ df -h /mnt/zd0 $ zfs set volsize=800M tank/zd0 $ resize2fs /dev/zd0 $ df -h /mnt/zd0 Original-patch-by: Fajar A. Nugraha <github@fajar.net> Closes #68 Closes #84
2011-02-25 07:36:01 +00:00
ZFS_AC_KERNEL_CHECK_DISK_SIZE_CHANGE
Tear down and flush the mmap region The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com> Closes #255
2011-06-25 12:30:29 +00:00
ZFS_AC_KERNEL_TRUNCATE_SETSIZE
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
ZFS_AC_KERNEL_6ARGS_SECURITY_INODE_INIT_SECURITY
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 18:44:07 +00:00
ZFS_AC_KERNEL_MOUNT_NODEV
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
ZFS_AC_KERNEL_BDI
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
if test "$LINUX_OBJ" != "$LINUX"; then
KERNELMAKE_PARAMS="$KERNELMAKE_PARAMS O=$LINUX_OBJ"
fi
AC_SUBST(KERNELMAKE_PARAMS)
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
dnl # -Wall -fno-strict-aliasing -Wstrict-prototypes and other
dnl # compiler options are added by the kernel build system.
Check for -Wno-unused-but-set-variable gcc support Gcc versions 4.3.2 and earlier do not support the compiler flag -Wno-unused-but-set-variable. This can lead to build failures on older Linux platforms such as Debian Lenny. Since this is an optional build argument this changes add a new autoconf check for the option. If it is supported by the installed version of gcc then it is used otherwise it is omited. See commit's 12c1acde76683108441827ae9affba1872f3afe5 and 79713039a2b6e0ed223d141b4a8a8455f282d2f2 for the reason the -Wno-unused-but-set-variable options was originally added.
2011-06-14 18:02:13 +00:00
KERNELCPPFLAGS="$KERNELCPPFLAGS $NO_UNUSED_BUT_SET_VARIABLE"
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
KERNELCPPFLAGS="$KERNELCPPFLAGS -DHAVE_SPL -D_KERNEL"
KERNELCPPFLAGS="$KERNELCPPFLAGS -DTEXT_DOMAIN=\\\"zfs-linux-kernel\\\""
AC_SUBST(KERNELCPPFLAGS)
])
dnl #
dnl # Detect name used for Module.symvers file in kernel
dnl #
AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [
modpost=$LINUX/scripts/Makefile.modpost
AC_MSG_CHECKING([kernel file name for module symbols])
if test -f "$modpost"; then
if grep -q Modules.symvers $modpost; then
LINUX_SYMBOLS=Modules.symvers
else
LINUX_SYMBOLS=Module.symvers
fi
Make Missing Modules.symvers Fatal Detect early on in configure if the Modules.symvers file is missing. Without this file there will be build failures later and it's best to catch this early and provide a useful error. In this case the most likely problem is the kernel-devel packages are not installed. It may also be possible that they are using an unbuilt custom kernel in which case they must build the kernel first. Closes #127
2011-03-07 21:03:48 +00:00
if ! test -f "$LINUX_OBJ/$LINUX_SYMBOLS"; then
AC_MSG_ERROR([
*** Please make sure the kernel devel package for your distribution
*** is installed. If your building with a custom kernel make sure the
*** kernel is configured, built, and the '--with-linux=PATH' configure
*** option refers to the location of the kernel source.])
fi
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
else
LINUX_SYMBOLS=NONE
fi
AC_MSG_RESULT($LINUX_SYMBOLS)
AC_SUBST(LINUX_SYMBOLS)
])
dnl #
dnl # Detect the kernel to be built against
dnl #
AC_DEFUN([ZFS_AC_KERNEL], [
AC_ARG_WITH([linux],
AS_HELP_STRING([--with-linux=PATH],
[Path to kernel source]),
[kernelsrc="$withval"])
AC_ARG_WITH(linux-obj,
AS_HELP_STRING([--with-linux-obj=PATH],
[Path to kernel build objects]),
[kernelbuild="$withval"])
AC_MSG_CHECKING([kernel source directory])
if test -z "$kernelsrc"; then
Prefer /lib/modules/$(uname -r)/ links Preferentially use the /lib/modules/$(uname -r)/source and /lib/modules/$(uname -r)/build links. Only if neither of these links exist fallback to alternate methods for deducing which kernel to build with. This resolves the need to manually specify --with-linux= and --with-linux-obj= on Debian systems.
2011-02-10 22:54:33 +00:00
if test -e "/lib/modules/$(uname -r)/source"; then
headersdir="/lib/modules/$(uname -r)/source"
sourcelink=$(readlink -f "$headersdir")
elif test -e "/lib/modules/$(uname -r)/build"; then
headersdir="/lib/modules/$(uname -r)/build"
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
sourcelink=$(readlink -f "$headersdir")
else
sourcelink=$(ls -1d /usr/src/kernels/* \
/usr/src/linux-* \
2>/dev/null | grep -v obj | tail -1)
fi
if test -n "$sourcelink" && test -e ${sourcelink}; then
kernelsrc=`readlink -f ${sourcelink}`
else
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([
*** Please make sure the kernel devel package for your distribution
*** is installed then try again. If that fails you can specify the
*** location of the kernel source with the '--with-linux=PATH' option.])
fi
else
if test "$kernelsrc" = "NONE"; then
kernsrcver=NONE
fi
fi
AC_MSG_RESULT([$kernelsrc])
AC_MSG_CHECKING([kernel build directory])
if test -z "$kernelbuild"; then
Prefer /lib/modules/$(uname -r)/ links Preferentially use the /lib/modules/$(uname -r)/source and /lib/modules/$(uname -r)/build links. Only if neither of these links exist fallback to alternate methods for deducing which kernel to build with. This resolves the need to manually specify --with-linux= and --with-linux-obj= on Debian systems.
2011-02-10 22:54:33 +00:00
if test -e "/lib/modules/$(uname -r)/build"; then
kernelbuild=`readlink -f /lib/modules/$(uname -r)/build`
elif test -d ${kernelsrc}-obj/${target_cpu}/${target_cpu}; then
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernelbuild=${kernelsrc}-obj/${target_cpu}/${target_cpu}
elif test -d ${kernelsrc}-obj/${target_cpu}/default; then
kernelbuild=${kernelsrc}-obj/${target_cpu}/default
elif test -d `dirname ${kernelsrc}`/build-${target_cpu}; then
kernelbuild=`dirname ${kernelsrc}`/build-${target_cpu}
else
kernelbuild=${kernelsrc}
fi
fi
AC_MSG_RESULT([$kernelbuild])
AC_MSG_CHECKING([kernel source version])
utsrelease1=$kernelbuild/include/linux/version.h
utsrelease2=$kernelbuild/include/linux/utsrelease.h
utsrelease3=$kernelbuild/include/generated/utsrelease.h
if test -r $utsrelease1 && fgrep -q UTS_RELEASE $utsrelease1; then
utsrelease=linux/version.h
elif test -r $utsrelease2 && fgrep -q UTS_RELEASE $utsrelease2; then
utsrelease=linux/utsrelease.h
elif test -r $utsrelease3 && fgrep -q UTS_RELEASE $utsrelease3; then
utsrelease=generated/utsrelease.h
fi
if test "$utsrelease"; then
kernsrcver=`(echo "#include <$utsrelease>";
echo "kernsrcver=UTS_RELEASE") |
cpp -I $kernelbuild/include |
grep "^kernsrcver=" | cut -d \" -f 2`
if test -z "$kernsrcver"; then
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([*** Cannot determine kernel version.])
fi
else
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.])
fi
AC_MSG_RESULT([$kernsrcver])
LINUX=${kernelsrc}
LINUX_OBJ=${kernelbuild}
LINUX_VERSION=${kernsrcver}
AC_SUBST(LINUX)
AC_SUBST(LINUX_OBJ)
AC_SUBST(LINUX_VERSION)
ZFS_AC_MODULE_SYMVERS
])
dnl #
dnl # Detect name used for the additional SPL Module.symvers file. If one
dnl # does not exist this is likely because the SPL has been configured
dnl # but not built. To allow recursive builds a good guess is made as to
dnl # what this file will be named based on what it is named in the kernel
dnl # build products. This file will first be used at link time so if
dnl # the guess is wrong the build will fail then. This unfortunately
dnl # means the ZFS package does not contain a reliable mechanism to
dnl # detect symbols exported by the SPL at configure time.
dnl #
AC_DEFUN([ZFS_AC_SPL_MODULE_SYMVERS], [
AC_MSG_CHECKING([spl file name for module symbols])
if test -r $SPL_OBJ/Module.symvers; then
SPL_SYMBOLS=Module.symvers
elif test -r $SPL_OBJ/Modules.symvers; then
SPL_SYMBOLS=Modules.symvers
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
elif test -r $SPL_OBJ/module/Module.symvers; then
SPL_SYMBOLS=Module.symvers
elif test -r $SPL_OBJ/module/Modules.symvers; then
SPL_SYMBOLS=Modules.symvers
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
else
SPL_SYMBOLS=$LINUX_SYMBOLS
fi
AC_MSG_RESULT([$SPL_SYMBOLS])
AC_SUBST(SPL_SYMBOLS)
])
dnl #
dnl # Detect the SPL module to be built against
dnl #
AC_DEFUN([ZFS_AC_SPL], [
AC_ARG_WITH([spl],
AS_HELP_STRING([--with-spl=PATH],
[Path to spl source]),
[splsrc="$withval"])
AC_ARG_WITH([spl-obj],
AS_HELP_STRING([--with-spl-obj=PATH],
[Path to spl build objects]),
[splbuild="$withval"])
AC_MSG_CHECKING([spl source directory])
if test -z "$splsrc"; then
sourcelink=`ls -1d /usr/src/spl-*/${LINUX_VERSION} \
2>/dev/null | tail -1`
if test -z "$sourcelink" || test ! -e $sourcelink; then
sourcelink=../spl
fi
if test -e $sourcelink; then
splsrc=`readlink -f ${sourcelink}`
else
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([
*** Please make sure the spl devel package for your distribution
*** is installed then try again. If that fails you can specify the
*** location of the spl source with the '--with-spl=PATH' option.])
fi
else
if test "$splsrc" = "NONE"; then
splbuild=NONE
splsrcver=NONE
fi
fi
AC_MSG_RESULT([$splsrc])
AC_MSG_CHECKING([spl build directory])
if test -z "$splbuild"; then
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
splbuild=${splsrc}
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
fi
AC_MSG_RESULT([$splbuild])
AC_MSG_CHECKING([spl source version])
Fix spl version check The spl_config.h file is checked to determine the spl version. However, the zfs code was looking for it in the source directory and not the build directory.
2010-09-03 03:44:41 +00:00
if test -r $splbuild/spl_config.h &&
fgrep -q SPL_META_VERSION $splbuild/spl_config.h; then
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
splsrcver=`(echo "#include <spl_config.h>";
echo "splsrcver=SPL_META_VERSION") |
Fix spl version check The spl_config.h file is checked to determine the spl version. However, the zfs code was looking for it in the source directory and not the build directory.
2010-09-03 03:44:41 +00:00
cpp -I $splbuild |
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
grep "^splsrcver=" | cut -d \" -f 2`
fi
if test -z "$splsrcver"; then
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([
*** Cannot determine the version of the spl source.
*** Please prepare the spl source before running this script])
fi
AC_MSG_RESULT([$splsrcver])
SPL=${splsrc}
SPL_OBJ=${splbuild}
SPL_VERSION=${splsrcver}
AC_SUBST(SPL)
AC_SUBST(SPL_OBJ)
AC_SUBST(SPL_VERSION)
ZFS_AC_SPL_MODULE_SYMVERS
])
Make CONFIG_PREEMPT Fatal Until support is added for preemptible kernels detect this at configure time and make it fatal. Otherwise, it is possible to have a successful build and kernel modules with flakey behavior.
2011-03-07 18:59:26 +00:00
dnl #
dnl # Certain kernel build options are not supported. These must be
dnl # detected at configure time and cause a build failure. Otherwise
dnl # modules may be successfully built that behave incorrectly.
dnl #
dnl # CONFIG_PREEMPT - Preempt kernels require special handling.
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
dnl #
dnl # There are certain kernel build options which when enabled are
dnl # completely incompatible with non GPL kernel modules. It is best
dnl # to detect these at configure time and fail with a clear error
dnl # rather than build everything and fail during linking.
dnl #
dnl # CONFIG_DEBUG_LOCK_ALLOC - Maps mutex_lock() to mutex_lock_nested()
dnl #
AC_DEFUN([ZFS_AC_KERNEL_CONFIG], [
Make CONFIG_PREEMPT Fatal Until support is added for preemptible kernels detect this at configure time and make it fatal. Otherwise, it is possible to have a successful build and kernel modules with flakey behavior.
2011-03-07 18:59:26 +00:00
ZFS_LINUX_CONFIG([PREEMPT],
AC_MSG_ERROR([
*** Kernel built with CONFIG_PREEMPT which is not supported.
** You must rebuild your kernel without this option.]), [])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
if test "$ZFS_META_LICENSE" = CDDL; then
ZFS_LINUX_CONFIG([DEBUG_LOCK_ALLOC],
AC_MSG_ERROR([
*** Kernel built with CONFIG_DEBUG_LOCK_ALLOC which is
*** incompatible with the CDDL license. You must rebuild
*** your kernel without this option.]), [])
fi
if test "$ZFS_META_LICENSE" = GPL; then
AC_DEFINE([HAVE_GPL_ONLY_SYMBOLS], [1],
[Define to 1 if licensed under the GPL])
fi
])
dnl #
dnl # ZFS_LINUX_CONFTEST
dnl #
AC_DEFUN([ZFS_LINUX_CONFTEST], [
cat confdefs.h - <<_ACEOF >conftest.c
$1
_ACEOF
])
dnl #
dnl # ZFS_LANG_PROGRAM(C)([PROLOGUE], [BODY])
dnl #
m4_define([ZFS_LANG_PROGRAM], [
$1
int
main (void)
{
dnl Do *not* indent the following line: there may be CPP directives.
dnl Don't move the `;' right after for the same reason.
$2
;
return 0;
}
])
dnl #
dnl # ZFS_LINUX_COMPILE_IFELSE / like AC_COMPILE_IFELSE
dnl #
AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [
m4_ifvaln([$1], [ZFS_LINUX_CONFTEST([$1])])
rm -Rf build && mkdir -p build
echo "obj-m := conftest.o" >build/Makefile
AS_IF(
[AC_TRY_COMMAND(cp conftest.c build && make [$2] -C $LINUX_OBJ EXTRA_CFLAGS="-Werror-implicit-function-declaration $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build) >/dev/null && AC_TRY_COMMAND([$3])],
[$4],
[_AC_MSG_LOG_CONFTEST m4_ifvaln([$5],[$5])]
)
rm -Rf build
])
dnl #
dnl # ZFS_LINUX_TRY_COMPILE like AC_TRY_COMPILE
dnl #
AC_DEFUN([ZFS_LINUX_TRY_COMPILE],
[ZFS_LINUX_COMPILE_IFELSE(
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
[modules],
[test -s build/conftest.o],
[$3], [$4])
])
dnl #
dnl # ZFS_LINUX_CONFIG
dnl #
AC_DEFUN([ZFS_LINUX_CONFIG],
[AC_MSG_CHECKING([whether Linux was built with CONFIG_$1])
ZFS_LINUX_TRY_COMPILE([
Fix the configure CONFIG_* option detection The latest kernels no longer define AUTOCONF_INCLUDED which was being used to detect the new style autoconf.h kernel configure options. This results in the CONFIG_* checks always failing incorrectly for newer kernels. The fix for this is a simplification of the testing method. Rather than attempting to explicitly include to renamed config header. It is simpler to unconditionally include <linux/module.h> which must pick up the correctly named header. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #320
2011-07-22 21:10:38 +00:00
#include <linux/module.h>
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
],[
#ifndef CONFIG_$1
#error CONFIG_$1 not #defined
#endif
],[
AC_MSG_RESULT([yes])
$2
],[
AC_MSG_RESULT([no])
$3
])
])
dnl #
dnl # ZFS_CHECK_SYMBOL_EXPORT
dnl # check symbol exported or not
dnl #
AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT],
[AC_MSG_CHECKING([whether symbol $1 is exported])
grep -q -E '[[[:space:]]]$1[[[:space:]]]' \
$LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null
rc=$?
if test $rc -ne 0; then
export=0
for file in $2; do
grep -q -E "EXPORT_SYMBOL.*($1)" "$LINUX/$file" 2>/dev/null
rc=$?
if test $rc -eq 0; then
export=1
break;
fi
done
if test $export -eq 0; then
AC_MSG_RESULT([no])
$4
else
AC_MSG_RESULT([yes])
$3
fi
else
AC_MSG_RESULT([yes])
$3
fi
])
Reference in New Issue Copy Permalink