freebsd-dev/sys/dev/sound/isa/mss.c

/*
 * Copyright (c) 1999 Cameron Grant <gandalf@vilnya.demon.co.uk>
 * Copyright Luigi Rizzo, 1997,1998
 * Copyright by Hannu Savolainen 1994, 1995
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD$
 */

#include <dev/sound/pcm/sound.h>

#if NPCM > 0

/* board-specific include files */
#include <dev/sound/isa/mss.h>

struct mss_info;

struct mss_chinfo {
	struct mss_info *parent;
	pcm_channel *channel;
	snd_dbuf *buffer;
	int dir;
};

struct mss_info {
    struct resource *io_base;	/* primary I/O address for the board */
    int		     io_rid;
    struct resource *conf_base; /* and the opti931 also has a config space */
    int		     conf_rid;
    struct resource *irq;
    int		     irq_rid;
    struct resource *drq1; /* play */
    int		     drq1_rid;
    struct resource *drq2; /* rec */
    int		     drq2_rid;
    bus_dma_tag_t    parent_dmat;

    int pdma, rdma;
    int bd_id;      /* used to hold board-id info, eg. sb version,
		     * mss codec type, etc. etc.
		     */
    int opti_offset;		/* offset from config_base for opti931 */
    u_long  bd_flags;       /* board-specific flags */
    struct mss_chinfo pch, rch;
};

static int 		mss_probe(device_t dev);
static int 		mss_attach(device_t dev);

static driver_intr_t 	mss_intr;

/* prototypes for local functions */
static int 		mss_detect(device_t dev, struct mss_info *mss);
static char 		*ymf_test(device_t dev, struct mss_info *mss);
static void		ad_unmute(struct mss_info *mss);

/* mixer set funcs */
static int 		mss_mixer_set(struct mss_info *mss, int dev, int left, int right);
static int 		mss_set_recsrc(struct mss_info *mss, int mask);

/* io funcs */
static int 		ad_wait_init(struct mss_info *mss, int x);
static int 		ad_read(struct mss_info *mss, int reg);
static void 		ad_write(struct mss_info *mss, int reg, u_char data);
static void 		ad_write_cnt(struct mss_info *mss, int reg, u_short data);

/* io primitives */
static void 		conf_wr(struct mss_info *mss, u_char reg, u_char data);
static u_char 		conf_rd(struct mss_info *mss, u_char reg);

#if NPNP > 0
static int 		pnpmss_probe(device_t dev);
static int 		pnpmss_attach(device_t dev);

static driver_intr_t 	opti931_intr;
#endif

static int mssmix_init(snd_mixer *m);
static int mssmix_set(snd_mixer *m, unsigned dev, unsigned left, unsigned right);
static int mssmix_setrecsrc(snd_mixer *m, u_int32_t src);
static snd_mixer mss_mixer = {
    "MSS mixer",
    mssmix_init,
    mssmix_set,
    mssmix_setrecsrc,
};

static int ymmix_init(snd_mixer *m);
static int ymmix_set(snd_mixer *m, unsigned dev, unsigned left, unsigned right);
static int ymmix_setrecsrc(snd_mixer *m, u_int32_t src);
static snd_mixer yamaha_mixer = {
    "OPL3-SAx mixer",
    ymmix_init,
    ymmix_set,
    ymmix_setrecsrc,
};

static devclass_t pcm_devclass;

/* channel interface */
static void *msschan_init(void *devinfo, snd_dbuf *b, pcm_channel *c, int dir);
static int msschan_setdir(void *data, int dir);
static int msschan_setformat(void *data, u_int32_t format);
static int msschan_setspeed(void *data, u_int32_t speed);
static int msschan_setblocksize(void *data, u_int32_t blocksize);
static int msschan_trigger(void *data, int go);
static int msschan_getptr(void *data);
static pcmchan_caps *msschan_getcaps(void *data);

static pcmchan_caps mss_caps = {
	4000, 48000,
	AFMT_STEREO | AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW,
	AFMT_STEREO | AFMT_S16_LE
};

static pcmchan_caps guspnp_caps = {
	4000, 48000,
	AFMT_STEREO | AFMT_U8 | AFMT_S16_LE | AFMT_A_LAW,
	AFMT_STEREO | AFMT_S16_LE
};

static pcmchan_caps opti931_caps = {
	4000, 48000,
	AFMT_STEREO | AFMT_U8 | AFMT_S16_LE,
	AFMT_STEREO | AFMT_S16_LE
};

static pcm_channel mss_chantemplate = {
	msschan_init,
	msschan_setdir,
	msschan_setformat,
	msschan_setspeed,
	msschan_setblocksize,
	msschan_trigger,
	msschan_getptr,
	msschan_getcaps,
};

#define MD_AD1848	0x91
#define MD_AD1845	0x92
#define MD_CS4248	0xA1
#define MD_CS4231	0xA2
#define MD_CS4231A	0xA3
#define MD_CS4232	0xA4
#define MD_CS4232A	0xA5
#define MD_CS4236	0xA6
#define MD_CS4237	0xA7
#define	MD_OPTI931	0xB1
#define MD_OPTI925	0xB2
#define	MD_GUSPNP	0xB8
#define	MD_YM0020	0xC1
#define	MD_VIVO		0xD1

#define	DV_F_TRUE_MSS	0x00010000	/* mss _with_ base regs */

#define FULL_DUPLEX(x) ((x)->bd_flags & BD_F_DUPLEX)

static int
port_rd(struct resource *port, int off)
{
	if (port)
		return bus_space_read_1(rman_get_bustag(port),
					rman_get_bushandle(port),
					off);
	else
		return -1;
}

static void
port_wr(struct resource *port, int off, u_int8_t data)
{
	if (port)
		return bus_space_write_1(rman_get_bustag(port),
					 rman_get_bushandle(port),
					 off, data);
}

static int
io_rd(struct mss_info *mss, int reg)
{
	if (mss->bd_flags & BD_F_MSS_OFFSET) reg -= 4;
	return port_rd(mss->io_base, reg);
}

static void
io_wr(struct mss_info *mss, int reg, u_int8_t data)
{
	if (mss->bd_flags & BD_F_MSS_OFFSET) reg -= 4;
	return port_wr(mss->io_base, reg, data);
}

static void
conf_wr(struct mss_info *mss, u_char reg, u_char value)
{
    	port_wr(mss->conf_base, 0, reg);
    	port_wr(mss->conf_base, 1, value);
}

static u_char
conf_rd(struct mss_info *mss, u_char reg)
{
	port_wr(mss->conf_base, 0, reg);
    	return port_rd(mss->conf_base, 1);
}

static void
opti_wr(struct mss_info *mss, u_char reg, u_char value)
{
    	port_wr(mss->conf_base, mss->opti_offset + 0, reg);
    	port_wr(mss->conf_base, mss->opti_offset + 1, value);
}

static u_char
opti_rd(struct mss_info *mss, u_char reg)
{
	port_wr(mss->conf_base, mss->opti_offset + 0, reg);
    	return port_rd(mss->conf_base, mss->opti_offset + 1);
}

#if NPNP > 0
static void
gus_wr(struct mss_info *mss, u_char reg, u_char value)
{
    	port_wr(mss->conf_base, 3, reg);
    	port_wr(mss->conf_base, 5, value);
}

static u_char
gus_rd(struct mss_info *mss, u_char reg)
{
    	port_wr(mss->conf_base, 3, reg);
    	return port_rd(mss->conf_base, 5);
}
#endif

static void
mss_release_resources(struct mss_info *mss, device_t dev)
{
    	if (mss->irq) {
		bus_release_resource(dev, SYS_RES_IRQ, mss->irq_rid,
				     mss->irq);
		mss->irq = 0;
    	}
    	if (mss->drq1) {
		bus_release_resource(dev, SYS_RES_DRQ, mss->drq1_rid,
				     mss->drq1);
		mss->drq1 = 0;
		mss->pdma = -1;
    	}
    	if (mss->drq2) {
		bus_release_resource(dev, SYS_RES_DRQ, mss->drq2_rid,
				     mss->drq2);
		mss->drq2 = 0;
		mss->rdma = -1;
    	}
    	if (mss->io_base) {
		bus_release_resource(dev, SYS_RES_IOPORT, mss->io_rid,
				     mss->io_base);
		mss->io_base = 0;
    	}
    	if (mss->conf_base) {
		bus_release_resource(dev, SYS_RES_IOPORT, mss->conf_rid,
				     mss->conf_base);
		mss->conf_base = 0;
    	}
    	free(mss, M_DEVBUF);
}

static int
mss_alloc_resources(struct mss_info *mss, device_t dev)
{
    	int ok = 1;
	if (!mss->io_base)
    		mss->io_base = bus_alloc_resource(dev, SYS_RES_IOPORT, &mss->io_rid,
						  0, ~0, 1, RF_ACTIVE);
	if (!mss->irq)
    		mss->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &mss->irq_rid,
					      0, ~0, 1, RF_ACTIVE);
	if (!mss->drq1)
    		mss->drq1 = bus_alloc_resource(dev, SYS_RES_DRQ, &mss->drq1_rid,
					       0, ~0, 1, RF_ACTIVE);
    	if (mss->conf_rid >= 0 && !mss->conf_base)
        	mss->conf_base = bus_alloc_resource(dev, SYS_RES_IOPORT, &mss->conf_rid,
						    0, ~0, 1, RF_ACTIVE);
    	if (mss->drq2_rid >= 0 && !mss->drq2)
        	mss->drq2 = bus_alloc_resource(dev, SYS_RES_DRQ, &mss->drq2_rid,
					       0, ~0, 1, RF_ACTIVE);

    	if (!mss->io_base || !mss->drq1 || !mss->irq) ok = 0;
    	if (mss->conf_rid >= 0 && !mss->conf_base) ok = 0;
    	if (mss->drq2_rid >= 0 && !mss->drq2) ok = 0;

	if (ok) {
		mss->pdma = rman_get_start(mss->drq1);
		isa_dma_acquire(mss->pdma);
		isa_dmainit(mss->pdma, DSP_BUFFSIZE);
		mss->bd_flags &= ~BD_F_DUPLEX;
		if (mss->drq2) {
			mss->rdma = rman_get_start(mss->drq2);
			isa_dma_acquire(mss->rdma);
			isa_dmainit(mss->rdma, DSP_BUFFSIZE);
			mss->bd_flags |= BD_F_DUPLEX;
		} else mss->rdma = mss->pdma;
	}
    	return ok;
}

static int
mss_init(struct mss_info *mss, device_t dev)
{
       	u_char r6, r9;
	struct resource *alt;
	int rid, tmp;

	mss->bd_flags |= BD_F_MCE_BIT;
	switch(mss->bd_id) {
#if NPNP > 0
	case MD_OPTI931:
		/*
		 * The MED3931 v.1.0 allocates 3 bytes for the config
		 * space, whereas v.2.0 allocates 4 bytes. What I know
		 * for sure is that the upper two ports must be used,
		 * and they should end on a boundary of 4 bytes. So I
		 * need the following trick.
		 */
		mss->opti_offset =
			(rman_get_start(mss->conf_base) & ~3) + 2
			- rman_get_start(mss->conf_base);
		printf("mss_init: opti_offset=%d\n", mss->opti_offset);
    		opti_wr(mss, 4, 0xd6); /* fifo empty, OPL3, audio enable, SB3.2 */
    		ad_write(mss, 10, 2); /* enable interrupts */
    		opti_wr(mss, 6, 2);  /* MCIR6: mss enable, sb disable */
    		opti_wr(mss, 5, 0x28);  /* MCIR5: codec in exp. mode,fifo */
		break;

	case MD_GUSPNP:
		gus_wr(mss, 0x4c /* _URSTI */, 0);/* Pull reset */
    		DELAY(1000 * 30);
    		/* release reset  and enable DAC */
    		gus_wr(mss, 0x4c /* _URSTI */, 3);
    		DELAY(1000 * 30);
    		/* end of reset */

		rid = 0;
    		alt = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
    				     0, ~0, 1, RF_ACTIVE);
    		port_wr(alt, 0, 0xC); /* enable int and dma */
		bus_release_resource(dev, SYS_RES_IOPORT, rid, alt);

    		/*
     		 * unmute left & right line. Need to go in mode3, unmute,
     		 * and back to mode 2
     		 */
    		tmp = ad_read(mss, 0x0c);
    		ad_write(mss, 0x0c, 0x6c); /* special value to enter mode 3 */
    		ad_write(mss, 0x19, 0); /* unmute left */
    		ad_write(mss, 0x1b, 0); /* unmute right */
    		ad_write(mss, 0x0c, tmp); /* restore old mode */

    		/* send codec interrupts on irq1 and only use that one */
    		gus_wr(mss, 0x5a, 0x4f);

    		/* enable access to hidden regs */
    		tmp = gus_rd(mss, 0x5b /* IVERI */);
    		gus_wr(mss, 0x5b, tmp | 1);
    		BVDDB(printf("GUS: silicon rev %c\n", 'A' + ((tmp & 0xf) >> 4)));
		break;
#endif
    	case MD_YM0020:
         	conf_wr(mss, OPL3SAx_DMACONF, 0xa9); /* dma-b rec, dma-a play */
        	r6 = conf_rd(mss, OPL3SAx_DMACONF);
        	r9 = conf_rd(mss, OPL3SAx_MISC); /* version */
        	BVDDB(printf("Yamaha: ver 0x%x DMA config 0x%x\n", r6, r9);)
		/* yamaha - set volume to max */
		conf_wr(mss, OPL3SAx_VOLUMEL, 0);
		conf_wr(mss, OPL3SAx_VOLUMER, 0);
		conf_wr(mss, OPL3SAx_DMACONF, FULL_DUPLEX(mss)? 0xa9 : 0x8b);
		break;
 	}
    	if (FULL_DUPLEX(mss) && mss->bd_id != MD_OPTI931)
    		ad_write(mss, 12, ad_read(mss, 12) | 0x40); /* mode 2 */
    	ad_write(mss, 9, FULL_DUPLEX(mss)? 0 : 4);
    	ad_write(mss, 10, 2); /* int enable */
    	io_wr(mss, MSS_STATUS, 0); /* Clear interrupt status */
    	/* the following seem required on the CS4232 */
    	ad_unmute(mss);
	return 0;
}

/*
 * mss_probe() is the probe routine. Note, it is not necessary to
 * go through this for PnP devices, since they are already
 * indentified precisely using their PnP id.
 *
 * The base address supplied in the device refers to the old MSS
 * specs where the four 4 registers in io space contain configuration
 * information. Some boards (as an example, early MSS boards)
 * has such a block of registers, whereas others (generally CS42xx)
 * do not.  In order to distinguish between the two and do not have
 * to supply two separate probe routines, the flags entry in isa_device
 * has a bit to mark this.
 *
 */

static int
mss_probe(device_t dev)
{
    	u_char tmp, tmpx;
    	int flags, irq, drq, result = ENXIO, setres = 0;
    	struct mss_info *mss;

    	if (isa_get_vendorid(dev)) return ENXIO; /* not yet */

    	mss = (struct mss_info *)malloc(sizeof *mss, M_DEVBUF, M_NOWAIT);
    	if (!mss) return ENXIO;
    	bzero(mss, sizeof *mss);

    	mss->io_rid = 0;
    	mss->conf_rid = -1;
    	mss->irq_rid = 0;
    	mss->drq1_rid = 0;
    	mss->drq2_rid = -1;
    	mss->io_base = bus_alloc_resource(dev, SYS_RES_IOPORT, &mss->io_rid,
				      	0, ~0, 8, RF_ACTIVE);
    	if (!mss->io_base) {
        	BVDDB(printf("mss_probe: no address given, try 0x%x\n", 0x530));
		mss->io_rid = 0;
		/* XXX verify this */
		setres = 1;
		bus_set_resource(dev, SYS_RES_IOPORT, mss->io_rid,
    		         	0x530, 8);
		mss->io_base = bus_alloc_resource(dev, SYS_RES_IOPORT, &mss->io_rid,
					  	0, ~0, 8, RF_ACTIVE);
    	}
    	if (!mss->io_base) goto no;

    	/* got irq/dma regs? */
    	flags = device_get_flags(dev);
    	irq = isa_get_irq(dev);
    	drq = isa_get_drq(dev);

    	if (!(device_get_flags(dev) & DV_F_TRUE_MSS)) goto mss_probe_end;

    	/*
     	* Check if the IO port returns valid signature. The original MS
     	* Sound system returns 0x04 while some cards
     	* (AudioTriX Pro for example) return 0x00 or 0x0f.
     	*/

    	device_set_desc(dev, "MSS");
    	tmpx = tmp = io_rd(mss, 3);
    	if (tmp == 0xff) {	/* Bus float */
		BVDDB(printf("I/O addr inactive (%x), try pseudo_mss\n", tmp));
		device_set_flags(dev, flags & ~DV_F_TRUE_MSS);
		goto mss_probe_end;
    	}
    	tmp &= 0x3f;
    	if (!(tmp == 0x04 || tmp == 0x0f || tmp == 0x00)) {
		BVDDB(printf("No MSS signature detected on port 0x%lx (0x%x)\n",
		     	rman_get_start(mss->io_base), tmpx));
		goto no;
    	}
    	if (irq > 11) {
		printf("MSS: Bad IRQ %d\n", irq);
		goto no;
    	}
    	if (!(drq == 0 || drq == 1 || drq == 3)) {
		printf("MSS: Bad DMA %d\n", drq);
		goto no;
    	}
    	if (tmpx & 0x80) {
		/* 8-bit board: only drq1/3 and irq7/9 */
		if (drq == 0) {
		    	printf("MSS: Can't use DMA0 with a 8 bit card/slot\n");
		    	goto no;
		}
		if (!(irq == 7 || irq == 9)) {
		    	printf("MSS: Can't use IRQ%d with a 8 bit card/slot\n",
			       irq);
		    	goto no;
		}
    	}
	mss_probe_end:
    	result = mss_detect(dev, mss);
	no:
    	mss_release_resources(mss, dev);
#if 0
    	if (setres) ISA_DELETE_RESOURCE(device_get_parent(dev), dev,
    				    	SYS_RES_IOPORT, mss->io_rid); /* XXX ? */
#endif
    	return result;
}

static int
mss_detect(device_t dev, struct mss_info *mss)
{
    	int          i;
    	u_char       tmp, tmp1, tmp2;
    	char        *name, *yamaha;

    	if (mss->bd_id != 0) {
		device_printf(dev, "presel bd_id 0x%04x -- %s\n", mss->bd_id,
		      	device_get_desc(dev));
		return 0;
    	}

    	name = "AD1848";
    	mss->bd_id = MD_AD1848; /* AD1848 or CS4248 */

    	/*
     	* Check that the I/O address is in use.
     	*
     	* bit 7 of the base I/O port is known to be 0 after the chip has
     	* performed its power on initialization. Just assume this has
     	* happened before the OS is starting.
     	*
     	* If the I/O address is unused, it typically returns 0xff.
     	*/

    	for (i = 0; i < 10; i++)
		if ((tmp = io_rd(mss, MSS_INDEX)) & MSS_IDXBUSY) DELAY(10000);
		else break;

    	if (i >= 10) {	/* Not a AD1848 */
		BVDDB(printf("mss_detect, busy still set (0x%02x)\n", tmp));
		goto no;
    	}
    	/*
     	* Test if it's possible to change contents of the indirect
     	* registers. Registers 0 and 1 are ADC volume registers. The bit
     	* 0x10 is read only so try to avoid using it.
     	*/

    	ad_write(mss, 0, 0xaa);
    	ad_write(mss, 1, 0x45);/* 0x55 with bit 0x10 clear */
    	tmp1 = ad_read(mss, 0);
    	tmp2 = ad_read(mss, 1);
    	if (tmp1 != 0xaa || tmp2 != 0x45) {
		BVDDB(printf("mss_detect error - IREG (%x/%x)\n", tmp1, tmp2));
		goto no;
    	}

    	ad_write(mss, 0, 0x45);
    	ad_write(mss, 1, 0xaa);
    	tmp1 = ad_read(mss, 0);
    	tmp2 = ad_read(mss, 1);
    	if (tmp1 != 0x45 || tmp2 != 0xaa) {
		BVDDB(printf("mss_detect error - IREG2 (%x/%x)\n", tmp1, tmp2));
		goto no;
    	}

    	/*
     	* The indirect register I12 has some read only bits. Lets try to
     	* change them.
     	*/

    	tmp = ad_read(mss, 12);
    	ad_write(mss, 12, (~tmp) & 0x0f);
    	tmp1 = ad_read(mss, 12);

    	if ((tmp & 0x0f) != (tmp1 & 0x0f)) {
		BVDDB(printf("mss_detect - I12 (0x%02x was 0x%02x)\n", tmp1, tmp));
		goto no;
    	}

    	/*
     	* NOTE! Last 4 bits of the reg I12 tell the chip revision.
     	*	0x01=RevB
     	*  0x0A=RevC. also CS4231/CS4231A and OPTi931
     	*/

    	BVDDB(printf("mss_detect - chip revision 0x%02x\n", tmp & 0x0f);)

    	/*
     	* The original AD1848/CS4248 has just 16 indirect registers. This
     	* means that I0 and I16 should return the same value (etc.). Ensure
     	* that the Mode2 enable bit of I12 is 0. Otherwise this test fails
     	* with new parts.
     	*/

    	ad_write(mss, 12, 0);	/* Mode2=disabled */
#if 0
    	for (i = 0; i < 16; i++) {
		if ((tmp1 = ad_read(mss, i)) != (tmp2 = ad_read(mss, i + 16))) {
	    	BVDDB(printf("mss_detect warning - I%d: 0x%02x/0x%02x\n",
			i, tmp1, tmp2));
	    	/*
	     	* note - this seems to fail on the 4232 on I11. So we just break
	     	* rather than fail.  (which makes this test pointless - cg)
	     	*/
	    	break; /* return 0; */
		}
    	}
#endif
    	/*
     	* Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit
     	* (0x40). The bit 0x80 is always 1 in CS4248 and CS4231.
     	*
     	* On the OPTi931, however, I12 is readonly and only contains the
     	* chip revision ID (as in the CS4231A). The upper bits return 0.
     	*/

    	ad_write(mss, 12, 0x40);	/* Set mode2, clear 0x80 */

    	tmp1 = ad_read(mss, 12);
    	if (tmp1 & 0x80) name = "CS4248"; /* Our best knowledge just now */
    	if ((tmp1 & 0xf0) == 0x00) {
		BVDDB(printf("this should be an OPTi931\n");)
    	} else if ((tmp1 & 0xc0) != 0xC0) goto gotit;
	/*
	* The 4231 has bit7=1 always, and bit6 we just set to 1.
	* We want to check that this is really a CS4231
	* Verify that setting I0 doesn't change I16.
	*/
	ad_write(mss, 16, 0);	/* Set I16 to known value */
	ad_write(mss, 0, 0x45);
	if ((tmp1 = ad_read(mss, 16)) == 0x45) goto gotit;

	ad_write(mss, 0, 0xaa);
       	if ((tmp1 = ad_read(mss, 16)) == 0xaa) {	/* Rotten bits? */
       		BVDDB(printf("mss_detect error - step H(%x)\n", tmp1));
		goto no;
	}
	/* Verify that some bits of I25 are read only. */
	tmp1 = ad_read(mss, 25);	/* Original bits */
	ad_write(mss, 25, ~tmp1);	/* Invert all bits */
	if ((ad_read(mss, 25) & 0xe7) == (tmp1 & 0xe7)) {
		int id;

		/* It's at least CS4231 */
		name = "CS4231";
		mss->bd_id = MD_CS4231;

		/*
		* It could be an AD1845 or CS4231A as well.
		* CS4231 and AD1845 report the same revision info in I25
		* while the CS4231A reports different.
		*/

		id = ad_read(mss, 25) & 0xe7;
		/*
		* b7-b5 = version number;
		*	100 : all CS4231
		*	101 : CS4231A
		*
		* b2-b0 = chip id;
		*/
		switch (id) {

		case 0xa0:
			name = "CS4231A";
			mss->bd_id = MD_CS4231A;
		break;

		case 0xa2:
			name = "CS4232";
			mss->bd_id = MD_CS4232;
		break;

		case 0xb2:
		/* strange: the 4231 data sheet says b4-b3 are XX
		* so this should be the same as 0xa2
		*/
			name = "CS4232A";
			mss->bd_id = MD_CS4232A;
		break;

		case 0x80:
			/*
			* It must be a CS4231 or AD1845. The register I23
			* of CS4231 is undefined and it appears to be read
			* only. AD1845 uses I23 for setting sample rate.
			* Assume the chip is AD1845 if I23 is changeable.
			*/

			tmp = ad_read(mss, 23);

			ad_write(mss, 23, ~tmp);
			if (ad_read(mss, 23) != tmp) {	/* AD1845 ? */
				name = "AD1845";
				mss->bd_id = MD_AD1845;
			}
			ad_write(mss, 23, tmp);	/* Restore */

			yamaha = ymf_test(dev, mss);
			if (yamaha) {
				mss->bd_id = MD_YM0020;
				name = yamaha;
			}
			break;

		case 0x83:	/* CS4236 */
		case 0x03:      /* CS4236 on Intel PR440FX motherboard XXX */
			name = "CS4236";
			mss->bd_id = MD_CS4236;
			break;

		default:	/* Assume CS4231 */
	 		BVDDB(printf("unknown id 0x%02x, assuming CS4231\n", id);)
			mss->bd_id = MD_CS4231;
		}
	}
	ad_write(mss, 25, tmp1);	/* Restore bits */
gotit:
    	BVDDB(printf("mss_detect() - Detected %s\n", name));
    	device_set_desc(dev, name);
    	device_set_flags(dev,
			 ((device_get_flags(dev) & ~DV_F_DEV_MASK) |
			  ((mss->bd_id << DV_F_DEV_SHIFT) & DV_F_DEV_MASK)));
    	return 0;
no:
    	return ENXIO;
}

static char *
ymf_test(device_t dev, struct mss_info *mss)
{
    	static int ports[] = {0x370, 0x310, 0x538};
    	int p, i, j, version;
    	static char *chipset[] = {
		NULL,			/* 0 */
		"OPL3-SA2 (YMF711)",	/* 1 */
		"OPL3-SA3 (YMF715)",	/* 2 */
		"OPL3-SA3 (YMF715)",	/* 3 */
		"OPL3-SAx (YMF719)",	/* 4 */
		"OPL3-SAx (YMF719)",	/* 5 */
		"OPL3-SAx (YMF719)",	/* 6 */
		"OPL3-SAx (YMF719)",	/* 7 */
    	};

    	for (p = 0; p < 3; p++) {
		mss->conf_rid = 1;
		mss->conf_base = bus_alloc_resource(dev,
					  	SYS_RES_IOPORT,
					  	&mss->conf_rid,
					  	ports[p], ports[p] + 1, 2,
					  	RF_ACTIVE);
		if (!mss->conf_base) return 0;

		/* Test the index port of the config registers */
		i = port_rd(mss->conf_base, 0);
		port_wr(mss->conf_base, 0, OPL3SAx_DMACONF);
		j = (port_rd(mss->conf_base, 0) == OPL3SAx_DMACONF)? 1 : 0;
		port_wr(mss->conf_base, 0, i);
		if (!j) {
	    		bus_release_resource(dev, SYS_RES_IOPORT,
			 		     mss->conf_rid, mss->conf_base);
	    		mss->conf_base = 0;
	    		continue;
		}
		version = conf_rd(mss, OPL3SAx_MISC) & 0x07;
		return chipset[version];
    	}
    	return NULL;
}

static int
mss_doattach(device_t dev, struct mss_info *mss)
{
    	snddev_info *d = device_get_softc(dev);
    	void *ih;
    	int flags = device_get_flags(dev);
    	char status[SND_STATUSLEN];

    	if (!mss_alloc_resources(mss, dev)) goto no;
    	mss_init(mss, dev);
    	if (flags & DV_F_TRUE_MSS) {
		/* has IRQ/DMA registers, set IRQ and DMA addr */
		static char     interrupt_bits[12] =
	    	{-1, -1, -1, -1, -1, 0x28, -1, 0x08, -1, 0x10, 0x18, 0x20};
		static char     pdma_bits[4] =  {1, 2, -1, 3};
		static char	valid_rdma[4] = {1, 0, -1, 0};
		char		bits;

		if (!mss->irq || (bits = interrupt_bits[rman_get_start(mss->irq)]) == -1)
			goto no;
		io_wr(mss, 0, bits | 0x40);	/* config port */
		if ((io_rd(mss, 3) & 0x40) == 0) device_printf(dev, "IRQ Conflict?\n");
		/* Write IRQ+DMA setup */
		if (pdma_bits[mss->pdma] == -1) goto no;
		bits |= pdma_bits[mss->pdma];
		if (mss->pdma != mss->rdma) {
	    		if (mss->rdma == valid_rdma[mss->pdma]) bits |= 4;
	    		else {
				printf("invalid dual dma config %d:%d\n",
			       	mss->pdma, mss->rdma);
				goto no;
	    		}
		}
		io_wr(mss, 0, bits);
		printf("drq/irq conf %x\n", io_rd(mss, 0));
    	}
    	mixer_init(d, (mss->bd_id == MD_YM0020)? &yamaha_mixer : &mss_mixer, mss);
    	switch (mss->bd_id) {
	#if NPNP > 0
    	case MD_OPTI931:
		bus_setup_intr(dev, mss->irq, INTR_TYPE_TTY, opti931_intr, mss, &ih);
		break;
	#endif
    	default:
		bus_setup_intr(dev, mss->irq, INTR_TYPE_TTY, mss_intr, mss, &ih);
    	}
    	if (mss->pdma == mss->rdma)
		pcm_setflags(dev, pcm_getflags(dev) | SD_F_SIMPLEX);
    	if (bus_dma_tag_create(/*parent*/NULL, /*alignment*/2, /*boundary*/0,
			/*lowaddr*/BUS_SPACE_MAXADDR_24BIT,
			/*highaddr*/BUS_SPACE_MAXADDR,
			/*filter*/NULL, /*filterarg*/NULL,
			/*maxsize*/DSP_BUFFSIZE, /*nsegments*/1,
			/*maxsegz*/0x3ffff,
			/*flags*/0, &mss->parent_dmat) != 0) {
		device_printf(dev, "unable to create dma tag\n");
		goto no;
    	}
    	snprintf(status, SND_STATUSLEN, "at io 0x%lx irq %ld drq %d",
    	     	rman_get_start(mss->io_base), rman_get_start(mss->irq), mss->pdma);
    	if (mss->pdma != mss->rdma) snprintf(status + strlen(status),
        	SND_STATUSLEN - strlen(status), ":%d", mss->rdma);

    	if (pcm_register(dev, mss, 1, 1)) goto no;
    	pcm_addchan(dev, PCMDIR_REC, &mss_chantemplate, mss);
    	pcm_addchan(dev, PCMDIR_PLAY, &mss_chantemplate, mss);
    	pcm_setstatus(dev, status);

    	return 0;
no:
    	mss_release_resources(mss, dev);
    	return ENXIO;
}

static int
mss_attach(device_t dev)
{
    	struct mss_info *mss;
    	int flags = device_get_flags(dev);

    	mss = (struct mss_info *)malloc(sizeof *mss, M_DEVBUF, M_NOWAIT);
    	if (!mss) return ENXIO;
    	bzero(mss, sizeof *mss);

    	mss->io_rid = 0;
    	mss->conf_rid = -1;
    	mss->irq_rid = 0;
    	mss->drq1_rid = 0;
    	mss->drq2_rid = -1;
    	if (flags & DV_F_DUAL_DMA) {
        	bus_set_resource(dev, SYS_RES_DRQ, 1,
    		         	 flags & DV_F_DRQ_MASK, 1);
		mss->drq2_rid = 1;
    	}
    	mss->bd_id = (device_get_flags(dev) & DV_F_DEV_MASK) >> DV_F_DEV_SHIFT;
    	if (mss->bd_id == MD_YM0020) ymf_test(dev, mss);
    	return mss_doattach(dev, mss);
}

static device_method_t mss_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		mss_probe),
	DEVMETHOD(device_attach,	mss_attach),

	{ 0, 0 }
};

static driver_t mss_driver = {
	"pcm",
	mss_methods,
	sizeof(snddev_info),
};

DRIVER_MODULE(mss, isa, mss_driver, pcm_devclass, 0, 0);

/*
 * main irq handler for the CS423x. The OPTi931 code is
 * a separate one.
 * The correct way to operate for a device with multiple internal
 * interrupt sources is to loop on the status register and ack
 * interrupts until all interrupts are served and none are reported. At
 * this point the IRQ line to the ISA IRQ controller should go low
 * and be raised at the next interrupt.
 *
 * Since the ISA IRQ controller is sent EOI _before_ passing control
 * to the isr, it might happen that we serve an interrupt early, in
 * which case the status register at the next interrupt should just
 * say that there are no more interrupts...
 */

static void
mss_intr(void *arg)
{
    	struct mss_info *mss = arg;
    	u_char c = 0, served = 0;
    	int i;

    	DEB(printf("mss_intr\n"));
    	ad_read(mss, 11); /* fake read of status bits */

    	/* loop until there are interrupts, but no more than 10 times. */
    	for (i = 10; i > 0 && io_rd(mss, MSS_STATUS) & 1; i--) {
		/* get exact reason for full-duplex boards */
		c = FULL_DUPLEX(mss)? ad_read(mss, 24) : 0x30;
		c &= ~served;
		if (mss->pch.buffer->dl && (c & 0x10)) {
	    		served |= 0x10;
	    		chn_intr(mss->pch.channel);
		}
		if (mss->rch.buffer->dl && (c & 0x20)) {
	    		served |= 0x20;
	    		chn_intr(mss->rch.channel);
		}
		/* now ack the interrupt */
		if (FULL_DUPLEX(mss)) ad_write(mss, 24, ~c); /* ack selectively */
		else io_wr(mss, MSS_STATUS, 0);	/* Clear interrupt status */
    	}
    	if (i == 10) printf("mss_intr: irq, but not from mss\n");
    	else if (served == 0) {
		printf("mss_intr: unexpected irq with reason %x\n", c);
		/*
	 	* this should not happen... I have no idea what to do now.
	 	* maybe should do a sanity check and restart dmas ?
	 	*/
		io_wr(mss, MSS_STATUS, 0);	/* Clear interrupt status */
    	}
}

/*
 * AD_WAIT_INIT waits if we are initializing the board and
 * we cannot modify its settings
 */
static int
ad_wait_init(struct mss_info *mss, int x)
{
    	int arg = x, n = 0; /* to shut up the compiler... */
    	for (; x > 0; x--)
		if ((n = io_rd(mss, MSS_INDEX)) & MSS_IDXBUSY) DELAY(10);
		else return n;
    	printf("AD_WAIT_INIT FAILED %d 0x%02x\n", arg, n);
    	return n;
}

static int
ad_read(struct mss_info *mss, int reg)
{
    	u_long   flags;
    	int             x;

    	flags = spltty();
    	ad_wait_init(mss, 201);
    	x = io_rd(mss, MSS_INDEX) & ~MSS_IDXMASK;
    	io_wr(mss, MSS_INDEX, (u_char)(reg & MSS_IDXMASK) | x);
    	x = io_rd(mss, MSS_IDATA);
    	splx(flags);
	/* printf("ad_read %d, %x\n", reg, x); */
    	return x;
}

static void
ad_write(struct mss_info *mss, int reg, u_char data)
{
    	u_long   flags;

    	int x;
	/* printf("ad_write %d, %x\n", reg, data); */
    	flags = spltty();
    	ad_wait_init(mss, 1002);
    	x = io_rd(mss, MSS_INDEX) & ~MSS_IDXMASK;
    	io_wr(mss, MSS_INDEX, (u_char)(reg & MSS_IDXMASK) | x);
    	io_wr(mss, MSS_IDATA, data);
    	splx(flags);
}

static void
ad_write_cnt(struct mss_info *mss, int reg, u_short cnt)
{
    	ad_write(mss, reg+1, cnt & 0xff);
    	ad_write(mss, reg, cnt >> 8); /* upper base must be last */
}

static void
wait_for_calibration(struct mss_info *mss)
{
    	int n, t;

    	/*
     	* Wait until the auto calibration process has finished.
     	*
     	* 1) Wait until the chip becomes ready (reads don't return 0x80).
     	* 2) Wait until the ACI bit of I11 gets on
     	* 3) Wait until the ACI bit of I11 gets off
     	*/

    	n = ad_wait_init(mss, 1000);
    	if (n & MSS_IDXBUSY) printf("mss: Auto calibration timed out(1).\n");

    	for (t = 100; t > 0 && (ad_read(mss, 11) & 0x20) == 0; t--) DELAY(100);
    	for (t = 100; t > 0 && ad_read(mss, 11) & 0x20; t--) DELAY(100);
}

static void
ad_unmute(struct mss_info *mss)
{
    	ad_write(mss, 6, ad_read(mss, 6) & ~I6_MUTE);
    	ad_write(mss, 7, ad_read(mss, 7) & ~I6_MUTE);
}

static void
ad_enter_MCE(struct mss_info *mss)
{
    	int prev;

    	mss->bd_flags |= BD_F_MCE_BIT;
    	ad_wait_init(mss, 203);
    	prev = io_rd(mss, MSS_INDEX);
    	prev &= ~MSS_TRD;
    	io_wr(mss, MSS_INDEX, prev | MSS_MCE);
}

static void
ad_leave_MCE(struct mss_info *mss)
{
    	u_long   flags;
    	u_char   prev;

    	if ((mss->bd_flags & BD_F_MCE_BIT) == 0) {
		printf("--- hey, leave_MCE: MCE bit was not set!\n");
		return;
    	}

    	ad_wait_init(mss, 1000);

    	flags = spltty();
    	mss->bd_flags &= ~BD_F_MCE_BIT;

    	prev = io_rd(mss, MSS_INDEX);
    	prev &= ~MSS_TRD;
    	io_wr(mss, MSS_INDEX, prev & ~MSS_MCE); /* Clear the MCE bit */
    	wait_for_calibration(mss);
    	splx(flags);
}

/*
 * only one source can be set...
 */
static int
mss_set_recsrc(struct mss_info *mss, int mask)
{
    	u_char   recdev;

    	switch (mask) {
    	case SOUND_MASK_LINE:
    	case SOUND_MASK_LINE3:
		recdev = 0;
		break;

    	case SOUND_MASK_CD:
    	case SOUND_MASK_LINE1:
		recdev = 0x40;
		break;

    	case SOUND_MASK_IMIX:
		recdev = 0xc0;
		break;

    	case SOUND_MASK_MIC:
    	default:
		mask = SOUND_MASK_MIC;
		recdev = 0x80;
    	}
    	ad_write(mss, 0, (ad_read(mss, 0) & 0x3f) | recdev);
    	ad_write(mss, 1, (ad_read(mss, 1) & 0x3f) | recdev);
    	return mask;
}

/* there are differences in the mixer depending on the actual sound card. */
static int
mss_mixer_set(struct mss_info *mss, int dev, int left, int right)
{
    	int        regoffs;
    	mixer_tab *mix_d = (mss->bd_id == MD_OPTI931)? &opti931_devices : &mix_devices;
    	u_char     old, val;

    	if ((*mix_d)[dev][LEFT_CHN].nbits == 0) {
		DEB(printf("nbits = 0 for dev %d\n", dev));
		return -1;
    	}

    	if ((*mix_d)[dev][RIGHT_CHN].nbits == 0) right = left; /* mono */

    	/* Set the left channel */

    	regoffs = (*mix_d)[dev][LEFT_CHN].regno;
    	old = val = ad_read(mss, regoffs);
    	/* if volume is 0, mute chan. Otherwise, unmute. */
    	if (regoffs != 0) val = (left == 0)? old | 0x80 : old & 0x7f;
    	change_bits(mix_d, &val, dev, LEFT_CHN, left);
    	ad_write(mss, regoffs, val);

    	DEB(printf("LEFT: dev %d reg %d old 0x%02x new 0x%02x\n",
		dev, regoffs, old, val));

    	if ((*mix_d)[dev][RIGHT_CHN].nbits != 0) { /* have stereo */
		/* Set the right channel */
		regoffs = (*mix_d)[dev][RIGHT_CHN].regno;
		old = val = ad_read(mss, regoffs);
		if (regoffs != 1) val = (right == 0)? old | 0x80 : old & 0x7f;
		change_bits(mix_d, &val, dev, RIGHT_CHN, right);
		ad_write(mss, regoffs, val);

		DEB(printf("RIGHT: dev %d reg %d old 0x%02x new 0x%02x\n",
	    	dev, regoffs, old, val));
    	}
    	return 0; /* success */
}

static int
mss_speed(struct mss_chinfo *ch, int speed)
{
    	struct mss_info *mss = ch->parent;
    	/*
     	* In the CS4231, the low 4 bits of I8 are used to hold the
     	* sample rate.  Only a fixed number of values is allowed. This
     	* table lists them. The speed-setting routines scans the table
     	* looking for the closest match. This is the only supported method.
     	*
     	* In the CS4236, there is an alternate metod (which we do not
     	* support yet) which provides almost arbitrary frequency setting.
     	* In the AD1845, it looks like the sample rate can be
     	* almost arbitrary, and written directly to a register.
     	* In the OPTi931, there is a SB command which provides for
     	* almost arbitrary frequency setting.
     	*
     	*/
    	ad_enter_MCE(mss);
    	if (mss->bd_id == MD_AD1845) { /* Use alternate speed select regs */
		ad_write(mss, 22, (speed >> 8) & 0xff);	/* Speed MSB */
		ad_write(mss, 23, speed & 0xff);		/* Speed LSB */
		/* XXX must also do something in I27 for the ad1845 */
    	} else {
        	int i, sel = 0; /* assume entry 0 does not contain -1 */
        	static int speeds[] =
      	    	{8000, 5512, 16000, 11025, 27429, 18900, 32000, 22050,
	    	-1, 37800, -1, 44100, 48000, 33075, 9600, 6615};

        	for (i = 1; i < 16; i++)
   		    	if (speeds[i] > 0 &&
			    abs(speed-speeds[i]) < abs(speed-speeds[sel])) sel = i;
        	speed = speeds[sel];
        	ad_write(mss, 8, (ad_read(mss, 8) & 0xf0) | sel);
    	}
    	ad_leave_MCE(mss);

    	return speed;
}

/*
 * mss_format checks that the format is supported (or defaults to AFMT_U8)
 * and returns the bit setting for the 1848 register corresponding to
 * the desired format.
 *
 * fixed lr970724
 */

static int
mss_format(struct mss_chinfo *ch, u_int32_t format)
{
    	struct mss_info *mss = ch->parent;
    	int i, arg = format & ~AFMT_STEREO;

    	/*
     	* The data format uses 3 bits (just 2 on the 1848). For each
     	* bit setting, the following array returns the corresponding format.
     	* The code scans the array looking for a suitable format. In
     	* case it is not found, default to AFMT_U8 (not such a good
     	* choice, but let's do it for compatibility...).
     	*/

    	static int fmts[] =
        	{AFMT_U8, AFMT_MU_LAW, AFMT_S16_LE, AFMT_A_LAW,
		-1, AFMT_IMA_ADPCM, AFMT_U16_BE, -1};

    	for (i = 0; i < 8; i++) if (arg == fmts[i]) break;
    	arg = i << 1;
    	if (format & AFMT_STEREO) arg |= 1;
    	arg <<= 4;
    	ad_enter_MCE(mss);
    	ad_write(mss, 8, (ad_read(mss, 8) & 0x0f) | arg);
    	if (FULL_DUPLEX(mss)) ad_write(mss, 28, arg); /* capture mode */
    	ad_leave_MCE(mss);
    	return format;
}

static int
mss_trigger(struct mss_chinfo *ch, int go)
{
    	struct mss_info *mss = ch->parent;
    	u_char m;
    	int retry, wr, cnt;

    	wr = (ch->dir == PCMDIR_PLAY)? 1 : 0;
    	m = ad_read(mss, 9);
    	switch (go) {
    	case PCMTRIG_START:
		cnt = (ch->buffer->dl / ch->buffer->sample_size) - 1;

		DEB(if (m & 4) printf("OUCH! reg 9 0x%02x\n", m););
		m |= wr? I9_PEN : I9_CEN; /* enable DMA */
		ad_write_cnt(mss, (wr || !FULL_DUPLEX(mss))? 14 : 30, cnt);
		break;

    	case PCMTRIG_STOP:
    	case PCMTRIG_ABORT: /* XXX check this... */
		m &= ~(wr? I9_PEN : I9_CEN); /* Stop DMA */
#if 0
		/*
	 	* try to disable DMA by clearing count registers. Not sure it
	 	* is needed, and it might cause false interrupts when the
	 	* DMA is re-enabled later.
	 	*/
		ad_write_cnt(mss, (wr || !FULL_DUPLEX(mss))? 14 : 30, 0);
#endif
    	}
    	/* on the OPTi931 the enable bit seems hard to set... */
    	for (retry = 10; retry > 0; retry--) {
        	ad_write(mss, 9, m);
        	if (ad_read(mss, 9) == m) break;
    	}
    	if (retry == 0) printf("start dma, failed to set bit 0x%02x 0x%02x\n",
			       m, ad_read(mss, 9));
    	return 0;
}

#if NPNP > 0
static int
pnpmss_probe(device_t dev)
{
    	char *s = NULL;
    	u_int32_t logical_id = isa_get_logicalid(dev);
    	u_int32_t vend_id = isa_get_vendorid(dev);
    	u_int32_t id = vend_id & 0xff00ffff;

    	switch (logical_id) {
    	case 0x0000630e: /* CSC0000 */
 		if      (id == 0x3700630e) s = "CS4237";
 		else if (id == 0x2500630e) s = "CS4235";
 		else if (id == 0x3600630e) s = "CS4236";
 		else if (id == 0x3500630e) s = "CS4236B";
 		else if (id == 0x3200630e) s = "CS4232";
 		else s = "Unknown CS";
 		break;

    	case 0x2100a865: /* YMH0021 */
 		if      (id == 0x2000a865) s = "Yamaha SA2";
 		else if (id == 0x3000a865) s = "Yamaha SA3";
 		else if (id == 0x0000a865) s = "Yamaha YMF719 OPL-SA3";
 		else s = "Yamaha OPL-SAx";
 		break;

    	case 0x1110d315: /* ENS1011 */
 		s = "ENSONIQ SoundscapeVIVO";
 		break;

    	case 0x1093143e: /* OPT9310 */
 		s = "OPTi931";
 		break;

    	case 0x5092143e: /* OPT9250 XXX guessing */
 		s = "OPTi925";
 		break;

    	case 0x0000561e:
 		s = "GusPnP";
 		break;

    	case 0x01000000:
		if (vend_id == 0x0100a90d) s = "CMI8330";
		break;
    	}

    	if (s) {
		device_set_desc(dev, s);
		return 0;
    	}
    	return ENXIO;
}

static int
pnpmss_attach(device_t dev)
{
	struct mss_info *mss;
        u_int32_t vend_id = isa_get_vendorid(dev);

	mss = (struct mss_info *)malloc(sizeof *mss, M_DEVBUF, M_NOWAIT);
	if (!mss) return ENXIO;
	bzero(mss, sizeof *mss);

	mss->io_rid = 0;
	mss->conf_rid = -1;
	mss->irq_rid = 0;
	mss->drq1_rid = 0;
	mss->drq2_rid = 1;

	switch (vend_id & 0xff00ffff) {
	case 0x2000a865:	/* Yamaha SA2 */
	case 0x3000a865:	/* Yamaha SA3 */
	case 0x0000a865:	/* Yamaha YMF719 SA3 */
    	case 0x2100a865:	/* pnpbios sets vendor=logical */
	    mss->io_rid = 1;
	    mss->conf_rid = 4;
	    mss->bd_id = MD_YM0020;
	    break;

	case 0x8100d315:	/* ENSONIQ SoundscapeVIVO */
	    mss->io_rid = 1;
	    mss->bd_id = MD_VIVO;
	    break;

	case 0x3700630e:        /* CS4237 */
	case 0x2500630e:	/* AOpen AW37, CS4235 */
	    mss->bd_flags |= BD_F_MSS_OFFSET;
	    mss->bd_id = MD_CS4237;
	    break;

	case 0x3500630e:        /* CS4236B */
	case 0x3600630e:        /* CS4236 */
	    mss->bd_flags |= BD_F_MSS_OFFSET;
	    mss->bd_id = MD_CS4236;
	    break;

	case 0x3100143e: 	/* opti931 */
            mss->bd_flags |= BD_F_MSS_OFFSET;
    	    mss->conf_rid = 3;
            mss->bd_id = MD_OPTI931;
	    break;

	case 0x2500143e:	/* opti925 */
            mss->io_rid = 1;
            mss->conf_rid = 3;
	    mss->bd_id = MD_OPTI925;
	    break;

	case 0x0100561e:	/* guspnp */
	    mss->bd_flags |= BD_F_MSS_OFFSET;
            mss->io_rid = 2;
            mss->conf_rid = 1;
	    mss->drq1_rid = 1;
	    mss->drq2_rid = 0;
            mss->bd_id = MD_GUSPNP;
	    break;

        default:
	    mss->bd_flags |= BD_F_MSS_OFFSET;
	    mss->bd_id = MD_CS4232;
	    break;
	}
    	return mss_doattach(dev, mss);
}

static device_method_t pnpmss_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		pnpmss_probe),
	DEVMETHOD(device_attach,	pnpmss_attach),

	{ 0, 0 }
};

static driver_t pnpmss_driver = {
	"pcm",
	pnpmss_methods,
	sizeof(snddev_info),
};

DRIVER_MODULE(pnpmss, isa, pnpmss_driver, pcm_devclass, 0, 0);

/*
 * the opti931 seems to miss interrupts when working in full
 * duplex, so we try some heuristics to catch them.
 */
static void
opti931_intr(void *arg)
{
    	struct mss_info *mss = (struct mss_info *)arg;
    	u_char masked = 0, i11, mc11, c = 0;
    	u_char reason; /* b0 = playback, b1 = capture, b2 = timer */
    	int loops = 10;

#if 0
    	reason = io_rd(mss, MSS_STATUS);
    	if (!(reason & 1)) {/* no int, maybe a shared line ? */
		printf("intr: flag 0, mcir11 0x%02x\n", ad_read(mss, 11));
		return;
    	}
#endif
    	i11 = ad_read(mss, 11); /* XXX what's for ? */
	again:

    	c = mc11 = FULL_DUPLEX(mss)? opti_rd(mss, 11) : 0xc;
    	mc11 &= 0x0c;
    	if (c & 0x10) {
		DEB(printf("Warning: CD interrupt\n");)
		mc11 |= 0x10;
    	}
    	if (c & 0x20) {
		DEB(printf("Warning: MPU interrupt\n");)
		mc11 |= 0x20;
    	}
    	if (mc11 & masked) printf("irq reset failed, mc11 0x%02x, 0x%02x\n",
                              	  mc11, masked);
    	masked |= mc11;
    	/*
     	* the nice OPTi931 sets the IRQ line before setting the bits in
     	* mc11. So, on some occasions I have to retry (max 10 times).
     	*/
    	if (mc11 == 0) { /* perhaps can return ... */
		reason = io_rd(mss, MSS_STATUS);
		if (reason & 1) {
	    		DEB(printf("one more try...\n");)
	    		if (--loops) goto again;
	    		else DDB(printf("intr, but mc11 not set\n");)
		}
		if (loops == 0) printf("intr, nothing in mcir11 0x%02x\n", mc11);
		return;
    	}

    	if (mss->rch.buffer->dl && (mc11 & 8)) chn_intr(mss->rch.channel);
    	if (mss->pch.buffer->dl && (mc11 & 4)) chn_intr(mss->pch.channel);
    	opti_wr(mss, 11, ~mc11); /* ack */
    	if (--loops) goto again;
    	DEB(printf("xxx too many loops\n");)
}

#endif	/* NPNP > 0 */

static int
mssmix_init(snd_mixer *m)
{
	struct mss_info *mss = mix_getdevinfo(m);

	mix_setdevs(m, MODE2_MIXER_DEVICES);
	mix_setrecdevs(m, MSS_REC_DEVICES);
	switch(mss->bd_id) {
	case MD_OPTI931:
		mix_setdevs(m, OPTI931_MIXER_DEVICES);
		ad_write(mss, 20, 0x88);
		ad_write(mss, 21, 0x88);
		break;

	case MD_AD1848:
		mix_setdevs(m, MODE1_MIXER_DEVICES);
		break;

	case MD_GUSPNP:
		/* this is only necessary in mode 3 ... */
		ad_write(mss, 22, 0x88);
		ad_write(mss, 23, 0x88);
		break;
	}
	return 0;
}

static int
mssmix_set(snd_mixer *m, unsigned dev, unsigned left, unsigned right)
{
	struct mss_info *mss = mix_getdevinfo(m);

	mss_mixer_set(mss, dev, left, right);

	return left | (right << 8);
}

static int
mssmix_setrecsrc(snd_mixer *m, u_int32_t src)
{
	struct mss_info *mss = mix_getdevinfo(m);

	src = mss_set_recsrc(mss, src);
	return src;
}

static int
ymmix_init(snd_mixer *m)
{
	struct mss_info *mss = mix_getdevinfo(m);

	mssmix_init(m);
	mix_setdevs(m, mix_getdevs(m) | SOUND_MASK_VOLUME | SOUND_MASK_MIC);
	/* Set master volume */
	conf_wr(mss, OPL3SAx_VOLUMEL, 7);
	conf_wr(mss, OPL3SAx_VOLUMER, 7);

	return 0;
}

static int
ymmix_set(snd_mixer *m, unsigned dev, unsigned left, unsigned right)
{
	struct mss_info *mss = mix_getdevinfo(m);
	int t;

	switch (dev) {
	case SOUND_MIXER_VOLUME:
		if (left) t = 15 - (left * 15) / 100;
		else t = 0x80; /* mute */
		conf_wr(mss, OPL3SAx_VOLUMEL, t);
		if (right) t = 15 - (right * 15) / 100;
		else t = 0x80; /* mute */
		conf_wr(mss, OPL3SAx_VOLUMER, t);
		break;

	case SOUND_MIXER_MIC:
		t = left;
		if (left) t = 31 - (left * 31) / 100;
		else t = 0x80; /* mute */
		conf_wr(mss, OPL3SAx_MIC, t);
		break;

	case SOUND_MIXER_BASS:
	case SOUND_MIXER_TREBLE:
		/* Later maybe */

	default:
		mss_mixer_set(mss, dev, left, right);
	}

	return left | (right << 8);
}

static int
ymmix_setrecsrc(snd_mixer *m, u_int32_t src)
{
	struct mss_info *mss = mix_getdevinfo(m);
	src = mss_set_recsrc(mss, src);
	return src;
}

/* channel interface */
static void *
msschan_init(void *devinfo, snd_dbuf *b, pcm_channel *c, int dir)
{
	struct mss_info *mss = devinfo;
	struct mss_chinfo *ch = (dir == PCMDIR_PLAY)? &mss->pch : &mss->rch;

	ch->parent = mss;
	ch->channel = c;
	ch->buffer = b;
	ch->buffer->bufsize = DSP_BUFFSIZE;
	if (chn_allocbuf(ch->buffer, mss->parent_dmat) == -1) return NULL;
	return ch;
}

static int
msschan_setdir(void *data, int dir)
{
	struct mss_chinfo *ch = data;

	ch->buffer->chan = (dir == PCMDIR_PLAY)? ch->parent->pdma : ch->parent->rdma;
	ch->dir = dir;
	return 0;
}

static int
msschan_setformat(void *data, u_int32_t format)
{
	struct mss_chinfo *ch = data;

	mss_format(ch, format);
	return 0;
}

static int
msschan_setspeed(void *data, u_int32_t speed)
{
	struct mss_chinfo *ch = data;

	return mss_speed(ch, speed);
}

static int
msschan_setblocksize(void *data, u_int32_t blocksize)
{
	return blocksize;
}

static int
msschan_trigger(void *data, int go)
{
	struct mss_chinfo *ch = data;

	buf_isadma(ch->buffer, go);
	mss_trigger(ch, go);
	return 0;
}

static int
msschan_getptr(void *data)
{
	struct mss_chinfo *ch = data;
	return buf_isadmaptr(ch->buffer);
}

static pcmchan_caps *
msschan_getcaps(void *data)
{
	struct mss_chinfo *ch = data;

	switch(ch->parent->bd_id) {
	case MD_OPTI931:
		return &opti931_caps;
		break;

	case MD_GUSPNP:
		return &guspnp_caps;
		break;

	default:
		return &mss_caps;
		break;
	}
}

#endif /* NPCM > 0 */