freebsd-dev/sys/kern/sys_socket.c

824 lines
20 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-24 10:09:53 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)sys_socket.c 8.1 (Berkeley) 6/10/93
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
#include <sys/aio.h>
#include <sys/domain.h>
1994-05-24 10:09:53 +00:00
#include <sys/file.h>
#include <sys/filedesc.h>
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/malloc.h>
2005-03-11 15:06:16 +00:00
#include <sys/proc.h>
1994-05-24 10:09:53 +00:00
#include <sys/protosw.h>
#include <sys/sigio.h>
2005-03-11 15:06:16 +00:00
#include <sys/signal.h>
#include <sys/signalvar.h>
1994-05-24 10:09:53 +00:00
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/filio.h> /* XXX */
#include <sys/sockio.h>
1994-05-24 10:09:53 +00:00
#include <sys/stat.h>
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
#include <sys/sysctl.h>
#include <sys/sysproto.h>
#include <sys/taskqueue.h>
#include <sys/uio.h>
#include <sys/ucred.h>
#include <sys/un.h>
#include <sys/unpcb.h>
#include <sys/user.h>
1994-05-24 10:09:53 +00:00
#include <net/if.h>
#include <net/if_var.h>
1994-05-24 10:09:53 +00:00
#include <net/route.h>
#include <net/vnet.h>
1994-05-24 10:09:53 +00:00
#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <security/mac/mac_framework.h>
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_extern.h>
#include <vm/vm_map.h>
static SYSCTL_NODE(_kern_ipc, OID_AUTO, aio, CTLFLAG_RD, NULL,
"socket AIO stats");
static int empty_results;
SYSCTL_INT(_kern_ipc_aio, OID_AUTO, empty_results, CTLFLAG_RD, &empty_results,
0, "socket operation returned EAGAIN");
static int empty_retries;
SYSCTL_INT(_kern_ipc_aio, OID_AUTO, empty_retries, CTLFLAG_RD, &empty_retries,
0, "socket operation retries");
static fo_rdwr_t soo_read;
static fo_rdwr_t soo_write;
static fo_ioctl_t soo_ioctl;
static fo_poll_t soo_poll;
extern fo_kqfilter_t soo_kqfilter;
static fo_stat_t soo_stat;
static fo_close_t soo_close;
static fo_fill_kinfo_t soo_fill_kinfo;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
static fo_aio_queue_t soo_aio_queue;
static void soo_aio_cancel(struct kaiocb *job);
struct fileops socketops = {
.fo_read = soo_read,
.fo_write = soo_write,
.fo_truncate = invfo_truncate,
.fo_ioctl = soo_ioctl,
.fo_poll = soo_poll,
.fo_kqfilter = soo_kqfilter,
.fo_stat = soo_stat,
.fo_close = soo_close,
.fo_chmod = invfo_chmod,
.fo_chown = invfo_chown,
.fo_sendfile = invfo_sendfile,
.fo_fill_kinfo = soo_fill_kinfo,
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
.fo_aio_queue = soo_aio_queue,
.fo_flags = DFLAG_PASSABLE
};
1994-05-24 10:09:53 +00:00
static int
soo_read(struct file *fp, struct uio *uio, struct ucred *active_cred,
int flags, struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct socket *so = fp->f_data;
int error;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
#ifdef MAC
error = mac_socket_check_receive(active_cred, so);
if (error)
return (error);
#endif
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
error = soreceive(so, 0, uio, 0, 0, 0);
return (error);
1994-05-24 10:09:53 +00:00
}
static int
soo_write(struct file *fp, struct uio *uio, struct ucred *active_cred,
int flags, struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct socket *so = fp->f_data;
int error;
#ifdef MAC
error = mac_socket_check_send(active_cred, so);
if (error)
return (error);
#endif
error = sosend(so, 0, uio, 0, 0, 0, uio->uio_td);
2005-03-11 15:06:16 +00:00
if (error == EPIPE && (so->so_options & SO_NOSIGPIPE) == 0) {
PROC_LOCK(uio->uio_td->td_proc);
tdsignal(uio->uio_td, SIGPIPE);
2005-03-11 15:06:16 +00:00
PROC_UNLOCK(uio->uio_td->td_proc);
}
return (error);
1994-05-24 10:09:53 +00:00
}
static int
soo_ioctl(struct file *fp, u_long cmd, void *data, struct ucred *active_cred,
struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct socket *so = fp->f_data;
int error = 0;
1994-05-24 10:09:53 +00:00
switch (cmd) {
case FIONBIO:
SOCK_LOCK(so);
1994-05-24 10:09:53 +00:00
if (*(int *)data)
so->so_state |= SS_NBIO;
else
so->so_state &= ~SS_NBIO;
SOCK_UNLOCK(so);
break;
1994-05-24 10:09:53 +00:00
case FIOASYNC:
if (*(int *)data) {
SOCK_LOCK(so);
1994-05-24 10:09:53 +00:00
so->so_state |= SS_ASYNC;
Listening sockets improvements. o Separate fields of struct socket that belong to listening from fields that belong to normal dataflow, and unionize them. This shrinks the structure a bit. - Take out selinfo's from the socket buffers into the socket. The first reason is to support braindamaged scenario when a socket is added to kevent(2) and then listen(2) is cast on it. The second reason is that there is future plan to make socket buffers pluggable, so that for a dataflow socket a socket buffer can be changed, and in this case we also want to keep same selinfos through the lifetime of a socket. - Remove struct struct so_accf. Since now listening stuff no longer affects struct socket size, just move its fields into listening part of the union. - Provide sol_upcall field and enforce that so_upcall_set() may be called only on a dataflow socket, which has buffers, and for listening sockets provide solisten_upcall_set(). o Remove ACCEPT_LOCK() global. - Add a mutex to socket, to be used instead of socket buffer lock to lock fields of struct socket that don't belong to a socket buffer. - Allow to acquire two socket locks, but the first one must belong to a listening socket. - Make soref()/sorele() to use atomic(9). This allows in some situations to do soref() without owning socket lock. There is place for improvement here, it is possible to make sorele() also to lock optionally. - Most protocols aren't touched by this change, except UNIX local sockets. See below for more information. o Reduce copy-and-paste in kernel modules that accept connections from listening sockets: provide function solisten_dequeue(), and use it in the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4), infiniband, rpc. o UNIX local sockets. - Removal of ACCEPT_LOCK() global uncovered several races in the UNIX local sockets. Most races exist around spawning a new socket, when we are connecting to a local listening socket. To cover them, we need to hold locks on both PCBs when spawning a third one. This means holding them across sonewconn(). This creates a LOR between pcb locks and unp_list_lock. - To fix the new LOR, abandon the global unp_list_lock in favor of global unp_link_lock. Indeed, separating these two locks didn't provide us any extra parralelism in the UNIX sockets. - Now call into uipc_attach() may happen with unp_link_lock hold if, we are accepting, or without unp_link_lock in case if we are just creating a socket. - Another problem in UNIX sockets is that uipc_close() basicly did nothing for a listening socket. The vnode remained opened for connections. This is fixed by removing vnode in uipc_close(). Maybe the right way would be to do it for all sockets (not only listening), simply move the vnode teardown from uipc_detach() to uipc_close()? Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D9770
2017-06-08 21:30:34 +00:00
if (SOLISTENING(so)) {
so->sol_sbrcv_flags |= SB_ASYNC;
so->sol_sbsnd_flags |= SB_ASYNC;
} else {
SOCKBUF_LOCK(&so->so_rcv);
so->so_rcv.sb_flags |= SB_ASYNC;
SOCKBUF_UNLOCK(&so->so_rcv);
SOCKBUF_LOCK(&so->so_snd);
so->so_snd.sb_flags |= SB_ASYNC;
SOCKBUF_UNLOCK(&so->so_snd);
}
SOCK_UNLOCK(so);
1994-05-24 10:09:53 +00:00
} else {
SOCK_LOCK(so);
1994-05-24 10:09:53 +00:00
so->so_state &= ~SS_ASYNC;
Listening sockets improvements. o Separate fields of struct socket that belong to listening from fields that belong to normal dataflow, and unionize them. This shrinks the structure a bit. - Take out selinfo's from the socket buffers into the socket. The first reason is to support braindamaged scenario when a socket is added to kevent(2) and then listen(2) is cast on it. The second reason is that there is future plan to make socket buffers pluggable, so that for a dataflow socket a socket buffer can be changed, and in this case we also want to keep same selinfos through the lifetime of a socket. - Remove struct struct so_accf. Since now listening stuff no longer affects struct socket size, just move its fields into listening part of the union. - Provide sol_upcall field and enforce that so_upcall_set() may be called only on a dataflow socket, which has buffers, and for listening sockets provide solisten_upcall_set(). o Remove ACCEPT_LOCK() global. - Add a mutex to socket, to be used instead of socket buffer lock to lock fields of struct socket that don't belong to a socket buffer. - Allow to acquire two socket locks, but the first one must belong to a listening socket. - Make soref()/sorele() to use atomic(9). This allows in some situations to do soref() without owning socket lock. There is place for improvement here, it is possible to make sorele() also to lock optionally. - Most protocols aren't touched by this change, except UNIX local sockets. See below for more information. o Reduce copy-and-paste in kernel modules that accept connections from listening sockets: provide function solisten_dequeue(), and use it in the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4), infiniband, rpc. o UNIX local sockets. - Removal of ACCEPT_LOCK() global uncovered several races in the UNIX local sockets. Most races exist around spawning a new socket, when we are connecting to a local listening socket. To cover them, we need to hold locks on both PCBs when spawning a third one. This means holding them across sonewconn(). This creates a LOR between pcb locks and unp_list_lock. - To fix the new LOR, abandon the global unp_list_lock in favor of global unp_link_lock. Indeed, separating these two locks didn't provide us any extra parralelism in the UNIX sockets. - Now call into uipc_attach() may happen with unp_link_lock hold if, we are accepting, or without unp_link_lock in case if we are just creating a socket. - Another problem in UNIX sockets is that uipc_close() basicly did nothing for a listening socket. The vnode remained opened for connections. This is fixed by removing vnode in uipc_close(). Maybe the right way would be to do it for all sockets (not only listening), simply move the vnode teardown from uipc_detach() to uipc_close()? Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D9770
2017-06-08 21:30:34 +00:00
if (SOLISTENING(so)) {
so->sol_sbrcv_flags &= ~SB_ASYNC;
so->sol_sbsnd_flags &= ~SB_ASYNC;
} else {
SOCKBUF_LOCK(&so->so_rcv);
so->so_rcv.sb_flags &= ~SB_ASYNC;
SOCKBUF_UNLOCK(&so->so_rcv);
SOCKBUF_LOCK(&so->so_snd);
so->so_snd.sb_flags &= ~SB_ASYNC;
SOCKBUF_UNLOCK(&so->so_snd);
}
SOCK_UNLOCK(so);
1994-05-24 10:09:53 +00:00
}
break;
1994-05-24 10:09:53 +00:00
case FIONREAD:
/* Unlocked read. */
*(int *)data = sbavail(&so->so_rcv);
break;
1994-05-24 10:09:53 +00:00
There are a number of ways an application can check if there are inbound data waiting on a filedescriptor, such as a pipe or a socket, for instance by using select(2), poll(2), kqueue(2), ioctl(FIONREAD) etc. But we have no way of finding out if written data have yet to be disposed of, for instance, transmitted (and ack'ed!) to some remote host, or read by the applicantion at the far end of the pipe. The closest we get, is calling shutdown(2) on a TCP socket in non-blocking mode, but this has the undesirable sideeffect of preventing future communication. Add a complement to FIONREAD, called FIONWRITE, which returns the number of bytes not yet properly disposed of. Implement it for all sockets. Background: A HTTP server will want to time out connections, if no new request arrives within a certain period after the last transmitted response has actually been sent (and ack'ed). For a busy HTTP server, this timeout can be subsecond duration. In order to signal to a load-balancer that the connection is truly dead, TCP_RST will be the preferred method, as this avoids the need for a RTT delay for FIN handshaking, with a client which, surprisingly often, no longer at the remote IP number. If a slow, distant client is being served a response which is big enough to fill the window, but small enough to fit in the socket buffer, the write(2) call will return immediately. If the session timeout is armed at that time, all bytes in the response may not have been transmitted by the time it fires. FIONWRITE allows the timeout to check that no data is outstanding on the connection, before it TCP_RST's it. Input & Idea from: rwatson Approved by: re (kib)
2009-06-28 11:28:14 +00:00
case FIONWRITE:
/* Unlocked read. */
*(int *)data = sbavail(&so->so_snd);
There are a number of ways an application can check if there are inbound data waiting on a filedescriptor, such as a pipe or a socket, for instance by using select(2), poll(2), kqueue(2), ioctl(FIONREAD) etc. But we have no way of finding out if written data have yet to be disposed of, for instance, transmitted (and ack'ed!) to some remote host, or read by the applicantion at the far end of the pipe. The closest we get, is calling shutdown(2) on a TCP socket in non-blocking mode, but this has the undesirable sideeffect of preventing future communication. Add a complement to FIONREAD, called FIONWRITE, which returns the number of bytes not yet properly disposed of. Implement it for all sockets. Background: A HTTP server will want to time out connections, if no new request arrives within a certain period after the last transmitted response has actually been sent (and ack'ed). For a busy HTTP server, this timeout can be subsecond duration. In order to signal to a load-balancer that the connection is truly dead, TCP_RST will be the preferred method, as this avoids the need for a RTT delay for FIN handshaking, with a client which, surprisingly often, no longer at the remote IP number. If a slow, distant client is being served a response which is big enough to fill the window, but small enough to fit in the socket buffer, the write(2) call will return immediately. If the session timeout is armed at that time, all bytes in the response may not have been transmitted by the time it fires. FIONWRITE allows the timeout to check that no data is outstanding on the connection, before it TCP_RST's it. Input & Idea from: rwatson Approved by: re (kib)
2009-06-28 11:28:14 +00:00
break;
case FIONSPACE:
/* Unlocked read. */
if ((so->so_snd.sb_hiwat < sbused(&so->so_snd)) ||
(so->so_snd.sb_mbmax < so->so_snd.sb_mbcnt))
*(int *)data = 0;
else
*(int *)data = sbspace(&so->so_snd);
break;
case FIOSETOWN:
error = fsetown(*(int *)data, &so->so_sigio);
break;
case FIOGETOWN:
*(int *)data = fgetown(&so->so_sigio);
break;
1994-05-24 10:09:53 +00:00
case SIOCSPGRP:
error = fsetown(-(*(int *)data), &so->so_sigio);
break;
1994-05-24 10:09:53 +00:00
case SIOCGPGRP:
*(int *)data = -fgetown(&so->so_sigio);
break;
1994-05-24 10:09:53 +00:00
case SIOCATMARK:
/* Unlocked read. */
*(int *)data = (so->so_rcv.sb_state & SBS_RCVATMARK) != 0;
break;
default:
/*
* Interface/routing/protocol specific ioctls: interface and
* routing ioctls should have a different entry since a
* socket is unnecessary.
*/
if (IOCGROUP(cmd) == 'i')
error = ifioctl(so, cmd, data, td);
else if (IOCGROUP(cmd) == 'r') {
CURVNET_SET(so->so_vnet);
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
error = rtioctl_fib(cmd, data, so->so_fibnum);
CURVNET_RESTORE();
} else {
CURVNET_SET(so->so_vnet);
error = ((*so->so_proto->pr_usrreqs->pru_control)
(so, cmd, data, 0, td));
CURVNET_RESTORE();
}
break;
1994-05-24 10:09:53 +00:00
}
return (error);
1994-05-24 10:09:53 +00:00
}
static int
soo_poll(struct file *fp, int events, struct ucred *active_cred,
struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct socket *so = fp->f_data;
#ifdef MAC
int error;
error = mac_socket_check_poll(active_cred, so);
if (error)
return (error);
#endif
return (sopoll(so, events, fp->f_cred, td));
1994-05-24 10:09:53 +00:00
}
static int
soo_stat(struct file *fp, struct stat *ub, struct ucred *active_cred,
struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct socket *so = fp->f_data;
#ifdef MAC
int error;
#endif
1994-05-24 10:09:53 +00:00
bzero((caddr_t)ub, sizeof (*ub));
ub->st_mode = S_IFSOCK;
#ifdef MAC
error = mac_socket_check_stat(active_cred, so);
if (error)
return (error);
#endif
2017-06-09 15:54:48 +00:00
if (!SOLISTENING(so)) {
struct sockbuf *sb;
/*
* If SBS_CANTRCVMORE is set, but there's still data left
* in the receive buffer, the socket is still readable.
*/
sb = &so->so_rcv;
SOCKBUF_LOCK(sb);
if ((sb->sb_state & SBS_CANTRCVMORE) == 0 || sbavail(sb))
ub->st_mode |= S_IRUSR | S_IRGRP | S_IROTH;
ub->st_size = sbavail(sb) - sb->sb_ctl;
SOCKBUF_UNLOCK(sb);
sb = &so->so_snd;
SOCKBUF_LOCK(sb);
if ((sb->sb_state & SBS_CANTSENDMORE) == 0)
ub->st_mode |= S_IWUSR | S_IWGRP | S_IWOTH;
SOCKBUF_UNLOCK(sb);
}
ub->st_uid = so->so_cred->cr_uid;
ub->st_gid = so->so_cred->cr_gid;
return (*so->so_proto->pr_usrreqs->pru_sense)(so, ub);
1994-05-24 10:09:53 +00:00
}
/*
* API socket close on file pointer. We call soclose() to close the socket
* (including initiating closing protocols). soclose() will sorele() the
* file reference but the actual socket will not go away until the socket's
* ref count hits 0.
*/
static int
soo_close(struct file *fp, struct thread *td)
1994-05-24 10:09:53 +00:00
{
int error = 0;
struct socket *so;
1994-05-24 10:09:53 +00:00
so = fp->f_data;
fp->f_ops = &badfileops;
fp->f_data = NULL;
if (so)
error = soclose(so);
1994-05-24 10:09:53 +00:00
return (error);
}
static int
soo_fill_kinfo(struct file *fp, struct kinfo_file *kif, struct filedesc *fdp)
{
struct sockaddr *sa;
struct inpcb *inpcb;
struct unpcb *unpcb;
struct socket *so;
int error;
kif->kf_type = KF_TYPE_SOCKET;
so = fp->f_data;
CURVNET_SET(so->so_vnet);
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
kif->kf_un.kf_sock.kf_sock_domain0 =
so->so_proto->pr_domain->dom_family;
kif->kf_un.kf_sock.kf_sock_type0 = so->so_type;
kif->kf_un.kf_sock.kf_sock_protocol0 = so->so_proto->pr_protocol;
kif->kf_un.kf_sock.kf_sock_pcb = (uintptr_t)so->so_pcb;
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
switch (kif->kf_un.kf_sock.kf_sock_domain0) {
case AF_INET:
case AF_INET6:
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
if (kif->kf_un.kf_sock.kf_sock_protocol0 == IPPROTO_TCP) {
if (so->so_pcb != NULL) {
inpcb = (struct inpcb *)(so->so_pcb);
kif->kf_un.kf_sock.kf_sock_inpcb =
(uintptr_t)inpcb->inp_ppcb;
kif->kf_un.kf_sock.kf_sock_sendq =
sbused(&so->so_snd);
kif->kf_un.kf_sock.kf_sock_recvq =
sbused(&so->so_rcv);
}
}
break;
case AF_UNIX:
if (so->so_pcb != NULL) {
unpcb = (struct unpcb *)(so->so_pcb);
if (unpcb->unp_conn) {
kif->kf_un.kf_sock.kf_sock_unpconn =
(uintptr_t)unpcb->unp_conn;
kif->kf_un.kf_sock.kf_sock_rcv_sb_state =
so->so_rcv.sb_state;
kif->kf_un.kf_sock.kf_sock_snd_sb_state =
so->so_snd.sb_state;
kif->kf_un.kf_sock.kf_sock_sendq =
sbused(&so->so_snd);
kif->kf_un.kf_sock.kf_sock_recvq =
sbused(&so->so_rcv);
}
}
break;
}
error = so->so_proto->pr_usrreqs->pru_sockaddr(so, &sa);
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
if (error == 0 &&
sa->sa_len <= sizeof(kif->kf_un.kf_sock.kf_sa_local)) {
bcopy(sa, &kif->kf_un.kf_sock.kf_sa_local, sa->sa_len);
free(sa, M_SONAME);
}
error = so->so_proto->pr_usrreqs->pru_peeraddr(so, &sa);
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
if (error == 0 &&
sa->sa_len <= sizeof(kif->kf_un.kf_sock.kf_sa_peer)) {
bcopy(sa, &kif->kf_un.kf_sock.kf_sa_peer, sa->sa_len);
free(sa, M_SONAME);
}
strncpy(kif->kf_path, so->so_proto->pr_domain->dom_name,
sizeof(kif->kf_path));
CURVNET_RESTORE();
return (0);
}
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
/*
* Use the 'backend3' field in AIO jobs to store the amount of data
* completed by the AIO job so far.
*/
#define aio_done backend3
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
static STAILQ_HEAD(, task) soaio_jobs;
static struct mtx soaio_jobs_lock;
static struct task soaio_kproc_task;
static int soaio_starting, soaio_idle, soaio_queued;
static struct unrhdr *soaio_kproc_unr;
static int soaio_max_procs = MAX_AIO_PROCS;
SYSCTL_INT(_kern_ipc_aio, OID_AUTO, max_procs, CTLFLAG_RW, &soaio_max_procs, 0,
"Maximum number of kernel processes to use for async socket IO");
static int soaio_num_procs;
SYSCTL_INT(_kern_ipc_aio, OID_AUTO, num_procs, CTLFLAG_RD, &soaio_num_procs, 0,
"Number of active kernel processes for async socket IO");
static int soaio_target_procs = TARGET_AIO_PROCS;
SYSCTL_INT(_kern_ipc_aio, OID_AUTO, target_procs, CTLFLAG_RD,
&soaio_target_procs, 0,
"Preferred number of ready kernel processes for async socket IO");
static int soaio_lifetime;
SYSCTL_INT(_kern_ipc_aio, OID_AUTO, lifetime, CTLFLAG_RW, &soaio_lifetime, 0,
"Maximum lifetime for idle aiod");
static void
soaio_kproc_loop(void *arg)
{
struct proc *p;
struct vmspace *myvm;
struct task *task;
int error, id, pending;
id = (intptr_t)arg;
/*
* Grab an extra reference on the daemon's vmspace so that it
* doesn't get freed by jobs that switch to a different
* vmspace.
*/
p = curproc;
myvm = vmspace_acquire_ref(p);
mtx_lock(&soaio_jobs_lock);
MPASS(soaio_starting > 0);
soaio_starting--;
for (;;) {
while (!STAILQ_EMPTY(&soaio_jobs)) {
task = STAILQ_FIRST(&soaio_jobs);
STAILQ_REMOVE_HEAD(&soaio_jobs, ta_link);
soaio_queued--;
pending = task->ta_pending;
task->ta_pending = 0;
mtx_unlock(&soaio_jobs_lock);
task->ta_func(task->ta_context, pending);
mtx_lock(&soaio_jobs_lock);
}
MPASS(soaio_queued == 0);
if (p->p_vmspace != myvm) {
mtx_unlock(&soaio_jobs_lock);
vmspace_switch_aio(myvm);
mtx_lock(&soaio_jobs_lock);
continue;
}
soaio_idle++;
error = mtx_sleep(&soaio_idle, &soaio_jobs_lock, 0, "-",
soaio_lifetime);
soaio_idle--;
if (error == EWOULDBLOCK && STAILQ_EMPTY(&soaio_jobs) &&
soaio_num_procs > soaio_target_procs)
break;
}
soaio_num_procs--;
mtx_unlock(&soaio_jobs_lock);
free_unr(soaio_kproc_unr, id);
kproc_exit(0);
}
static void
soaio_kproc_create(void *context, int pending)
{
struct proc *p;
int error, id;
mtx_lock(&soaio_jobs_lock);
for (;;) {
if (soaio_num_procs < soaio_target_procs) {
/* Must create */
} else if (soaio_num_procs >= soaio_max_procs) {
/*
* Hit the limit on kernel processes, don't
* create another one.
*/
break;
} else if (soaio_queued <= soaio_idle + soaio_starting) {
/*
* No more AIO jobs waiting for a process to be
* created, so stop.
*/
break;
}
soaio_starting++;
mtx_unlock(&soaio_jobs_lock);
id = alloc_unr(soaio_kproc_unr);
error = kproc_create(soaio_kproc_loop, (void *)(intptr_t)id,
&p, 0, 0, "soaiod%d", id);
if (error != 0) {
free_unr(soaio_kproc_unr, id);
mtx_lock(&soaio_jobs_lock);
soaio_starting--;
break;
}
mtx_lock(&soaio_jobs_lock);
soaio_num_procs++;
}
mtx_unlock(&soaio_jobs_lock);
}
void
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
soaio_enqueue(struct task *task)
{
mtx_lock(&soaio_jobs_lock);
MPASS(task->ta_pending == 0);
task->ta_pending++;
STAILQ_INSERT_TAIL(&soaio_jobs, task, ta_link);
soaio_queued++;
if (soaio_queued <= soaio_idle)
wakeup_one(&soaio_idle);
else if (soaio_num_procs < soaio_max_procs)
taskqueue_enqueue(taskqueue_thread, &soaio_kproc_task);
mtx_unlock(&soaio_jobs_lock);
}
static void
soaio_init(void)
{
soaio_lifetime = AIOD_LIFETIME_DEFAULT;
STAILQ_INIT(&soaio_jobs);
mtx_init(&soaio_jobs_lock, "soaio jobs", NULL, MTX_DEF);
soaio_kproc_unr = new_unrhdr(1, INT_MAX, NULL);
TASK_INIT(&soaio_kproc_task, 0, soaio_kproc_create, NULL);
if (soaio_target_procs > 0)
taskqueue_enqueue(taskqueue_thread, &soaio_kproc_task);
}
SYSINIT(soaio, SI_SUB_VFS, SI_ORDER_ANY, soaio_init, NULL);
static __inline int
soaio_ready(struct socket *so, struct sockbuf *sb)
{
return (sb == &so->so_rcv ? soreadable(so) : sowriteable(so));
}
static void
soaio_process_job(struct socket *so, struct sockbuf *sb, struct kaiocb *job)
{
struct ucred *td_savedcred;
struct thread *td;
struct file *fp;
struct uio uio;
struct iovec iov;
size_t cnt, done;
long ru_before;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
int error, flags;
SOCKBUF_UNLOCK(sb);
aio_switch_vmspace(job);
td = curthread;
fp = job->fd_file;
retry:
td_savedcred = td->td_ucred;
td->td_ucred = job->cred;
done = job->aio_done;
cnt = job->uaiocb.aio_nbytes - done;
iov.iov_base = (void *)((uintptr_t)job->uaiocb.aio_buf + done);
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
iov.iov_len = cnt;
uio.uio_iov = &iov;
uio.uio_iovcnt = 1;
uio.uio_offset = 0;
uio.uio_resid = cnt;
uio.uio_segflg = UIO_USERSPACE;
uio.uio_td = td;
flags = MSG_NBIO;
/*
* For resource usage accounting, only count a completed request
* as a single message to avoid counting multiple calls to
* sosend/soreceive on a blocking socket.
*/
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
if (sb == &so->so_rcv) {
uio.uio_rw = UIO_READ;
ru_before = td->td_ru.ru_msgrcv;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
#ifdef MAC
error = mac_socket_check_receive(fp->f_cred, so);
if (error == 0)
#endif
error = soreceive(so, NULL, &uio, NULL, NULL, &flags);
if (td->td_ru.ru_msgrcv != ru_before)
job->msgrcv = 1;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
} else {
if (!TAILQ_EMPTY(&sb->sb_aiojobq))
flags |= MSG_MORETOCOME;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
uio.uio_rw = UIO_WRITE;
ru_before = td->td_ru.ru_msgsnd;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
#ifdef MAC
error = mac_socket_check_send(fp->f_cred, so);
if (error == 0)
#endif
error = sosend(so, NULL, &uio, NULL, NULL, flags, td);
if (td->td_ru.ru_msgsnd != ru_before)
job->msgsnd = 1;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
if (error == EPIPE && (so->so_options & SO_NOSIGPIPE) == 0) {
PROC_LOCK(job->userproc);
kern_psignal(job->userproc, SIGPIPE);
PROC_UNLOCK(job->userproc);
}
}
done += cnt - uio.uio_resid;
job->aio_done = done;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
td->td_ucred = td_savedcred;
if (error == EWOULDBLOCK) {
/*
* The request was either partially completed or not
* completed at all due to racing with a read() or
* write() on the socket. If the socket is
* non-blocking, return with any partial completion.
* If the socket is blocking or if no progress has
* been made, requeue this request at the head of the
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
* queue to try again when the socket is ready.
*/
MPASS(done != job->uaiocb.aio_nbytes);
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
SOCKBUF_LOCK(sb);
if (done == 0 || !(so->so_state & SS_NBIO)) {
empty_results++;
if (soaio_ready(so, sb)) {
empty_retries++;
SOCKBUF_UNLOCK(sb);
goto retry;
}
if (!aio_set_cancel_function(job, soo_aio_cancel)) {
SOCKBUF_UNLOCK(sb);
if (done != 0)
aio_complete(job, done, 0);
else
aio_cancel(job);
SOCKBUF_LOCK(sb);
} else {
TAILQ_INSERT_HEAD(&sb->sb_aiojobq, job, list);
}
return;
}
SOCKBUF_UNLOCK(sb);
}
if (done != 0 && (error == ERESTART || error == EINTR ||
error == EWOULDBLOCK))
error = 0;
if (error)
aio_complete(job, -1, error);
else
aio_complete(job, done, 0);
SOCKBUF_LOCK(sb);
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
}
static void
soaio_process_sb(struct socket *so, struct sockbuf *sb)
{
struct kaiocb *job;
CURVNET_SET(so->so_vnet);
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
SOCKBUF_LOCK(sb);
while (!TAILQ_EMPTY(&sb->sb_aiojobq) && soaio_ready(so, sb)) {
job = TAILQ_FIRST(&sb->sb_aiojobq);
TAILQ_REMOVE(&sb->sb_aiojobq, job, list);
if (!aio_clear_cancel_function(job))
continue;
soaio_process_job(so, sb, job);
}
/*
* If there are still pending requests, the socket must not be
* ready so set SB_AIO to request a wakeup when the socket
* becomes ready.
*/
if (!TAILQ_EMPTY(&sb->sb_aiojobq))
sb->sb_flags |= SB_AIO;
sb->sb_flags &= ~SB_AIO_RUNNING;
SOCKBUF_UNLOCK(sb);
SOCK_LOCK(so);
sorele(so);
CURVNET_RESTORE();
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
}
void
soaio_rcv(void *context, int pending)
{
struct socket *so;
so = context;
soaio_process_sb(so, &so->so_rcv);
}
void
soaio_snd(void *context, int pending)
{
struct socket *so;
so = context;
soaio_process_sb(so, &so->so_snd);
}
void
sowakeup_aio(struct socket *so, struct sockbuf *sb)
{
SOCKBUF_LOCK_ASSERT(sb);
sb->sb_flags &= ~SB_AIO;
if (sb->sb_flags & SB_AIO_RUNNING)
return;
sb->sb_flags |= SB_AIO_RUNNING;
soref(so);
soaio_enqueue(&sb->sb_aiotask);
}
static void
soo_aio_cancel(struct kaiocb *job)
{
struct socket *so;
struct sockbuf *sb;
long done;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
int opcode;
so = job->fd_file->f_data;
opcode = job->uaiocb.aio_lio_opcode;
if (opcode == LIO_READ)
sb = &so->so_rcv;
else {
MPASS(opcode == LIO_WRITE);
sb = &so->so_snd;
}
SOCKBUF_LOCK(sb);
if (!aio_cancel_cleared(job))
TAILQ_REMOVE(&sb->sb_aiojobq, job, list);
if (TAILQ_EMPTY(&sb->sb_aiojobq))
sb->sb_flags &= ~SB_AIO;
SOCKBUF_UNLOCK(sb);
done = job->aio_done;
if (done != 0)
aio_complete(job, done, 0);
else
aio_cancel(job);
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
}
static int
soo_aio_queue(struct file *fp, struct kaiocb *job)
{
struct socket *so;
struct sockbuf *sb;
int error;
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
so = fp->f_data;
error = (*so->so_proto->pr_usrreqs->pru_aio_queue)(so, job);
if (error == 0)
return (0);
Refactor the AIO subsystem to permit file-type-specific handling and improve cancellation robustness. Introduce a new file operation, fo_aio_queue, which is responsible for queueing and completing an asynchronous I/O request for a given file. The AIO subystem now exports library of routines to manipulate AIO requests as well as the ability to run a handler function in the "default" pool of AIO daemons to service a request. A default implementation for file types which do not include an fo_aio_queue method queues requests to the "default" pool invoking the fo_read or fo_write methods as before. The AIO subsystem permits file types to install a private "cancel" routine when a request is queued to permit safe dequeueing and cleanup of cancelled requests. Sockets now use their own pool of AIO daemons and service per-socket requests in FIFO order. Socket requests will not block indefinitely permitting timely cancellation of all requests. Due to the now-tight coupling of the AIO subsystem with file types, the AIO subsystem is now a standard part of all kernels. The VFS_AIO kernel option and aio.ko module are gone. Many file types may block indefinitely in their fo_read or fo_write callbacks resulting in a hung AIO daemon. This can result in hung user processes (when processes attempt to cancel all outstanding requests during exit) or a hung system. To protect against this, AIO requests are only permitted for known "safe" files by default. AIO requests for all file types can be enabled by setting the new vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have been updated to skip operations on unsafe file types if the sysctl is zero. Currently, AIO requests on sockets and raw disks are considered safe and are enabled by default. aio_mlock() is also enabled by default. Reviewed by: cem, jilles Discussed with: kib (earlier version) Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D5289
2016-03-01 18:12:14 +00:00
switch (job->uaiocb.aio_lio_opcode) {
case LIO_READ:
sb = &so->so_rcv;
break;
case LIO_WRITE:
sb = &so->so_snd;
break;
default:
return (EINVAL);
}
SOCKBUF_LOCK(sb);
if (!aio_set_cancel_function(job, soo_aio_cancel))
panic("new job was cancelled");
TAILQ_INSERT_TAIL(&sb->sb_aiojobq, job, list);
if (!(sb->sb_flags & SB_AIO_RUNNING)) {
if (soaio_ready(so, sb))
sowakeup_aio(so, sb);
else
sb->sb_flags |= SB_AIO;
}
SOCKBUF_UNLOCK(sb);
return (0);
}