freebsd-dev/sys/vm/vm_phys.h

139 lines
4.5 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2002-2006 Rice University
Change the management of cached pages (PQ_CACHE) in two fundamental ways: (1) Cached pages are no longer kept in the object's resident page splay tree and memq. Instead, they are kept in a separate per-object splay tree of cached pages. However, access to this new per-object splay tree is synchronized by the _free_ page queues lock, not to be confused with the heavily contended page queues lock. Consequently, a cached page can be reclaimed by vm_page_alloc(9) without acquiring the object's lock or the page queues lock. This solves a problem independently reported by tegge@ and Isilon. Specifically, they observed the page daemon consuming a great deal of CPU time because of pages bouncing back and forth between the cache queue (PQ_CACHE) and the inactive queue (PQ_INACTIVE). The source of this problem turned out to be a deadlock avoidance strategy employed when selecting a cached page to reclaim in vm_page_select_cache(). However, the root cause was really that reclaiming a cached page required the acquisition of an object lock while the page queues lock was already held. Thus, this change addresses the problem at its root, by eliminating the need to acquire the object's lock. Moreover, keeping cached pages in the object's primary splay tree and memq was, in effect, optimizing for the uncommon case. Cached pages are reclaimed far, far more often than they are reactivated. Instead, this change makes reclamation cheaper, especially in terms of synchronization overhead, and reactivation more expensive, because reactivated pages will have to be reentered into the object's primary splay tree and memq. (2) Cached pages are now stored alongside free pages in the physical memory allocator's buddy queues, increasing the likelihood that large allocations of contiguous physical memory (i.e., superpages) will succeed. Finally, as a result of this change long-standing restrictions on when and where a cached page can be reclaimed and returned by vm_page_alloc(9) are eliminated. Specifically, calls to vm_page_alloc(9) specifying VM_ALLOC_INTERRUPT can now reclaim and return a formerly cached page. Consequently, a call to malloc(9) specifying M_NOWAIT is less likely to fail. Discussed with: many over the course of the summer, including jeff@, Justin Husted @ Isilon, peter@, tegge@ Tested by: an earlier version by kris@ Approved by: re (kensmith)
2007-09-25 06:25:06 +00:00
* Copyright (c) 2007 Alan L. Cox <alc@cs.rice.edu>
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Alan L. Cox,
* Olivier Crameri, Peter Druschel, Sitaram Iyer, and Juan Navarro.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
* WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Physical memory system definitions
*/
#ifndef _VM_PHYS_H_
#define _VM_PHYS_H_
#ifdef _KERNEL
#ifndef VM_NFREEORDER_MAX
#define VM_NFREEORDER_MAX VM_NFREEORDER
#endif
extern vm_paddr_t phys_avail[];
extern vm_paddr_t dump_avail[];
Very rough first cut at NUMA support for the physical page allocator. For now it uses a very dumb first-touch allocation policy. This will change in the future. - Each architecture indicates the maximum number of supported memory domains via a new VM_NDOMAIN parameter in <machine/vmparam.h>. - Each cpu now has a PCPU_GET(domain) member to indicate the memory domain a CPU belongs to. Domain values are dense and numbered from 0. - When a platform supports multiple domains, the default freelist (VM_FREELIST_DEFAULT) is split up into N freelists, one for each domain. The MD code is required to populate an array of mem_affinity structures. Each entry in the array defines a range of memory (start and end) and a domain for the range. Multiple entries may be present for a single domain. The list is terminated by an entry where all fields are zero. This array of structures is used to split up phys_avail[] regions that fall in VM_FREELIST_DEFAULT into per-domain freelists. - Each memory domain has a separate lookup-array of freelists that is used when fulfulling a physical memory allocation. Right now the per-domain freelists are listed in a round-robin order for each domain. In the future a table such as the ACPI SLIT table may be used to order the per-domain lookup lists based on the penalty for each memory domain relative to a specific domain. The lookup lists may be examined via a new vm.phys.lookup_lists sysctl. - The first-touch policy is implemented by using PCPU_GET(domain) to pick a lookup list when allocating memory. Reviewed by: alc
2010-07-27 20:33:50 +00:00
/* Domains must be dense (non-sparse) and zero-based. */
struct mem_affinity {
vm_paddr_t start;
vm_paddr_t end;
int domain;
};
#ifdef NUMA
extern struct mem_affinity *mem_affinity;
extern int *mem_locality;
#endif
Very rough first cut at NUMA support for the physical page allocator. For now it uses a very dumb first-touch allocation policy. This will change in the future. - Each architecture indicates the maximum number of supported memory domains via a new VM_NDOMAIN parameter in <machine/vmparam.h>. - Each cpu now has a PCPU_GET(domain) member to indicate the memory domain a CPU belongs to. Domain values are dense and numbered from 0. - When a platform supports multiple domains, the default freelist (VM_FREELIST_DEFAULT) is split up into N freelists, one for each domain. The MD code is required to populate an array of mem_affinity structures. Each entry in the array defines a range of memory (start and end) and a domain for the range. Multiple entries may be present for a single domain. The list is terminated by an entry where all fields are zero. This array of structures is used to split up phys_avail[] regions that fall in VM_FREELIST_DEFAULT into per-domain freelists. - Each memory domain has a separate lookup-array of freelists that is used when fulfulling a physical memory allocation. Right now the per-domain freelists are listed in a round-robin order for each domain. In the future a table such as the ACPI SLIT table may be used to order the per-domain lookup lists based on the penalty for each memory domain relative to a specific domain. The lookup lists may be examined via a new vm.phys.lookup_lists sysctl. - The first-touch policy is implemented by using PCPU_GET(domain) to pick a lookup list when allocating memory. Reviewed by: alc
2010-07-27 20:33:50 +00:00
struct vm_freelist {
struct pglist pl;
int lcnt;
};
struct vm_phys_seg {
vm_paddr_t start;
vm_paddr_t end;
vm_page_t first_page;
int domain;
struct vm_freelist (*free_queues)[VM_NFREEPOOL][VM_NFREEORDER_MAX];
};
extern struct vm_phys_seg vm_phys_segs[];
extern int vm_phys_nsegs;
Very rough first cut at NUMA support for the physical page allocator. For now it uses a very dumb first-touch allocation policy. This will change in the future. - Each architecture indicates the maximum number of supported memory domains via a new VM_NDOMAIN parameter in <machine/vmparam.h>. - Each cpu now has a PCPU_GET(domain) member to indicate the memory domain a CPU belongs to. Domain values are dense and numbered from 0. - When a platform supports multiple domains, the default freelist (VM_FREELIST_DEFAULT) is split up into N freelists, one for each domain. The MD code is required to populate an array of mem_affinity structures. Each entry in the array defines a range of memory (start and end) and a domain for the range. Multiple entries may be present for a single domain. The list is terminated by an entry where all fields are zero. This array of structures is used to split up phys_avail[] regions that fall in VM_FREELIST_DEFAULT into per-domain freelists. - Each memory domain has a separate lookup-array of freelists that is used when fulfulling a physical memory allocation. Right now the per-domain freelists are listed in a round-robin order for each domain. In the future a table such as the ACPI SLIT table may be used to order the per-domain lookup lists based on the penalty for each memory domain relative to a specific domain. The lookup lists may be examined via a new vm.phys.lookup_lists sysctl. - The first-touch policy is implemented by using PCPU_GET(domain) to pick a lookup list when allocating memory. Reviewed by: alc
2010-07-27 20:33:50 +00:00
/*
* The following functions are only to be used by the virtual memory system.
*/
void vm_phys_add_seg(vm_paddr_t start, vm_paddr_t end);
vm_page_t vm_phys_alloc_contig(int domain, u_long npages, vm_paddr_t low,
vm_paddr_t high, u_long alignment, vm_paddr_t boundary);
vm_page_t vm_phys_alloc_freelist_pages(int domain, int freelist, int pool,
int order);
int vm_phys_alloc_npages(int domain, int pool, int npages, vm_page_t ma[]);
vm_page_t vm_phys_alloc_pages(int domain, int pool, int order);
int vm_phys_domain_match(int prefer, vm_paddr_t low, vm_paddr_t high);
void vm_phys_enqueue_contig(vm_page_t m, u_long npages);
int vm_phys_fictitious_reg_range(vm_paddr_t start, vm_paddr_t end,
vm_memattr_t memattr);
void vm_phys_fictitious_unreg_range(vm_paddr_t start, vm_paddr_t end);
vm_page_t vm_phys_fictitious_to_vm_page(vm_paddr_t pa);
void vm_phys_free_contig(vm_page_t m, u_long npages);
void vm_phys_free_pages(vm_page_t m, int order);
void vm_phys_init(void);
vm_page_t vm_phys_paddr_to_vm_page(vm_paddr_t pa);
void vm_phys_register_domains(int ndomains, struct mem_affinity *affinity,
int *locality);
vm_page_t vm_phys_scan_contig(int domain, u_long npages, vm_paddr_t low,
vm_paddr_t high, u_long alignment, vm_paddr_t boundary, int options);
Change the management of cached pages (PQ_CACHE) in two fundamental ways: (1) Cached pages are no longer kept in the object's resident page splay tree and memq. Instead, they are kept in a separate per-object splay tree of cached pages. However, access to this new per-object splay tree is synchronized by the _free_ page queues lock, not to be confused with the heavily contended page queues lock. Consequently, a cached page can be reclaimed by vm_page_alloc(9) without acquiring the object's lock or the page queues lock. This solves a problem independently reported by tegge@ and Isilon. Specifically, they observed the page daemon consuming a great deal of CPU time because of pages bouncing back and forth between the cache queue (PQ_CACHE) and the inactive queue (PQ_INACTIVE). The source of this problem turned out to be a deadlock avoidance strategy employed when selecting a cached page to reclaim in vm_page_select_cache(). However, the root cause was really that reclaiming a cached page required the acquisition of an object lock while the page queues lock was already held. Thus, this change addresses the problem at its root, by eliminating the need to acquire the object's lock. Moreover, keeping cached pages in the object's primary splay tree and memq was, in effect, optimizing for the uncommon case. Cached pages are reclaimed far, far more often than they are reactivated. Instead, this change makes reclamation cheaper, especially in terms of synchronization overhead, and reactivation more expensive, because reactivated pages will have to be reentered into the object's primary splay tree and memq. (2) Cached pages are now stored alongside free pages in the physical memory allocator's buddy queues, increasing the likelihood that large allocations of contiguous physical memory (i.e., superpages) will succeed. Finally, as a result of this change long-standing restrictions on when and where a cached page can be reclaimed and returned by vm_page_alloc(9) are eliminated. Specifically, calls to vm_page_alloc(9) specifying VM_ALLOC_INTERRUPT can now reclaim and return a formerly cached page. Consequently, a call to malloc(9) specifying M_NOWAIT is less likely to fail. Discussed with: many over the course of the summer, including jeff@, Justin Husted @ Isilon, peter@, tegge@ Tested by: an earlier version by kris@ Approved by: re (kensmith)
2007-09-25 06:25:06 +00:00
void vm_phys_set_pool(int pool, vm_page_t m, int order);
boolean_t vm_phys_unfree_page(vm_page_t m);
Add an initial NUMA affinity/policy configuration for threads and processes. This is based on work done by jeff@ and jhb@, as well as the numa.diff patch that has been circulating when someone asks for first-touch NUMA on -10 or -11. * Introduce a simple set of VM policy and iterator types. * tie the policy types into the vm_phys path for now, mirroring how the initial first-touch allocation work was enabled. * add syscalls to control changing thread and process defaults. * add a global NUMA VM domain policy. * implement a simple cascade policy order - if a thread policy exists, use it; if a process policy exists, use it; use the default policy. * processes inherit policies from their parent processes, threads inherit policies from their parent threads. * add a simple tool (numactl) to query and modify default thread/process policities. * add documentation for the new syscalls, for numa and for numactl. * re-enable first touch NUMA again by default, as now policies can be set in a variety of methods. This is only relevant for very specific workloads. This doesn't pretend to be a final NUMA solution. The previous defaults in -HEAD (with MAXMEMDOM set) can be achieved by 'sysctl vm.default_policy=rr'. This is only relevant if MAXMEMDOM is set to something other than 1. Ie, if you're using GENERIC or a modified kernel with non-NUMA, then this is a glorified no-op for you. Thank you to Norse Corp for giving me access to rather large (for FreeBSD!) NUMA machines in order to develop and verify this. Thank you to Dell for providing me with dual socket sandybridge and westmere v3 hardware to do NUMA development with. Thank you to Scott Long at Netflix for providing me with access to the two-socket, four-domain haswell v3 hardware. Thank you to Peter Holm for running the stress testing suite against the NUMA branch during various stages of development! Tested: * MIPS (regression testing; non-NUMA) * i386 (regression testing; non-NUMA GENERIC) * amd64 (regression testing; non-NUMA GENERIC) * westmere, 2 socket (thankyou norse!) * sandy bridge, 2 socket (thankyou dell!) * ivy bridge, 2 socket (thankyou norse!) * westmere-EX, 4 socket / 1TB RAM (thankyou norse!) * haswell, 2 socket (thankyou norse!) * haswell v3, 2 socket (thankyou dell) * haswell v3, 2x18 core (thankyou scott long / netflix!) * Peter Holm ran a stress test suite on this work and found one issue, but has not been able to verify it (it doesn't look NUMA related, and he only saw it once over many testing runs.) * I've tested bhyve instances running in fixed NUMA domains and cpusets; all seems to work correctly. Verified: * intel-pcm - pcm-numa.x and pcm-memory.x, whilst selecting different NUMA policies for processes under test. Review: This was reviewed through phabricator (https://reviews.freebsd.org/D2559) as well as privately and via emails to freebsd-arch@. The git history with specific attributes is available at https://github.com/erikarn/freebsd/ in the NUMA branch (https://github.com/erikarn/freebsd/compare/local/adrian_numa_policy). This has been reviewed by a number of people (stas, rpaulo, kib, ngie, wblock) but not achieved a clear consensus. My hope is that with further exposure and testing more functionality can be implemented and evaluated. Notes: * The VM doesn't handle unbalanced domains very well, and if you have an overly unbalanced memory setup whilst under high memory pressure, VM page allocation may fail leading to a kernel panic. This was a problem in the past, but it's much more easily triggered now with these tools. * This work only controls the path through vm_phys; it doesn't yet strongly/predictably affect contigmalloc, KVA placement, UMA, etc. So, driver placement of memory isn't really guaranteed in any way. That's next on my plate. Sponsored by: Norse Corp, Inc.; Dell
2015-07-11 15:21:37 +00:00
int vm_phys_mem_affinity(int f, int t);
void vm_phys_early_add_seg(vm_paddr_t start, vm_paddr_t end);
vm_paddr_t vm_phys_early_alloc(int domain, size_t alloc_size);
void vm_phys_early_startup(void);
int vm_phys_avail_largest(void);
vm_paddr_t vm_phys_avail_size(int i);
/*
*
* vm_phys_domain:
*
* Return the index of the domain the page belongs to.
*/
static inline int
vm_phys_domain(vm_page_t m)
{
#ifdef NUMA
int domn, segind;
/* XXXKIB try to assert that the page is managed */
segind = m->segind;
KASSERT(segind < vm_phys_nsegs, ("segind %d m %p", segind, m));
domn = vm_phys_segs[segind].domain;
KASSERT(domn < vm_ndomains, ("domain %d m %p", domn, m));
return (domn);
#else
return (0);
#endif
}
int _vm_phys_domain(vm_paddr_t pa);
#endif /* _KERNEL */
#endif /* !_VM_PHYS_H_ */