freebsd-dev/release/sysinstall/help/en_US.ISO_8859-1/drives.hlp

24 lines
1.2 KiB
Plaintext
Raw Normal View History

1995-05-29 13:04:53 +00:00
Select the drive(s) you wish FreeBSD to be able to use.
If you are going to actually install some portion of FreeBSD on a
1995-05-29 13:04:53 +00:00
drive then PLEASE BE VERY CERTAIN that the Geometry reported in the
Partition Editor (see Installation Menu) is the correct one for your
drive and controller combination!
IDE drives often have a certain geometry set during the PC BIOS setup,
or (in the case of larger IDE drives) have their geometry "remapped"
by either the IDE controller or a special boot-sector translation
1995-05-29 13:04:53 +00:00
utility such as that by OnTrack Systems. In these cases, knowing
the correct geometry gets even more complicated as it's not something
you can easily tell by looking at the drive or the PC BIOS setup. The
best way of determining your geometry in such situations is to boot
DOS (from the hard disk, not a floppy!) and run the ``pfdisk'' utility
1995-05-29 13:04:53 +00:00
provided in the tools/ subdirectory of the FreeBSD CDROM or FTP site.
It will report the geometry that DOS sees, which is generally the
correct one.
FreeBSD does its best to guess all of this automatically, of course,
but it sometimes fails which is why it's a good idea to check it. The
Partition Editor has a `(G)eometry' command that will allow you to
change it as necessary.