freebsd-dev/usr.bin/tftp/tftp.c

271 lines
6.4 KiB
C
Raw Normal View History

1994-05-27 12:33:43 +00:00
/*
* Copyright (c) 1983, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-27 12:33:43 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
1994-05-27 12:33:43 +00:00
#ifndef lint
static char sccsid[] = "@(#)tftp.c 8.1 (Berkeley) 6/6/93";
#endif /* not lint */
#endif
1994-05-27 12:33:43 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-27 12:33:43 +00:00
/* Many bug fixes are from Jim Guyton <guyton@rand-unix> */
/*
* TFTP User Program -- Protocol Machines
*/
#include <sys/socket.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <sys/stat.h>
1994-05-27 12:33:43 +00:00
#include <netinet/in.h>
#include <arpa/tftp.h>
#include <err.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <netdb.h>
1994-05-27 12:33:43 +00:00
#include <stdio.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <stdlib.h>
#include <string.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <syslog.h>
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include "tftp.h"
#include "tftp-file.h"
#include "tftp-utils.h"
#include "tftp-io.h"
#include "tftp-transfer.h"
#include "tftp-options.h"
1994-05-27 12:33:43 +00:00
/*
* Send the requested file.
*/
void
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
xmitfile(int peer, char *port, int fd, char *name, char *mode)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
struct tftphdr *rp;
int n, i;
uint16_t block;
struct sockaddr_storage serv; /* valid server port number */
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char recvbuffer[MAXPKTSIZE];
struct tftp_stats tftp_stats;
stats_init(&tftp_stats);
1994-05-27 12:33:43 +00:00
memset(&serv, 0, sizeof(serv));
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
rp = (struct tftphdr *)recvbuffer;
if (port == NULL) {
struct servent *se;
se = getservbyname("tftp", "udp");
((struct sockaddr_in *)&peer_sock)->sin_port = se->s_port;
} else
((struct sockaddr_in *)&peer_sock)->sin_port =
htons(atoi(port));
for (i = 0; i < 12; i++) {
struct sockaddr_storage from;
/* Tell the other side what we want to do */
if (debug&DEBUG_SIMPLE)
printf("Sending %s\n", name);
n = send_wrq(peer, name, mode);
if (n > 0) {
printf("Cannot send WRQ packet\n");
return;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/*
* The first packet we receive has the new destination port
* we have to send the next packets to.
*/
n = receive_packet(peer, recvbuffer,
MAXPKTSIZE, &from, timeoutpacket);
/* We got some data! */
if (n >= 0) {
((struct sockaddr_in *)&peer_sock)->sin_port =
((struct sockaddr_in *)&from)->sin_port;
break;
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/* This should be retried */
if (n == RP_TIMEOUT) {
printf("Try %d, didn't receive answer from remote.\n",
i + 1);
continue;
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/* Everything else is fatal */
break;
}
if (i == 12) {
printf("Transfer timed out.\n");
return;
}
if (rp->th_opcode == ERROR) {
printf("Got ERROR, aborted\n");
return;
}
/*
* If the first packet is an OACK instead of an ACK packet,
* handle it different.
*/
if (rp->th_opcode == OACK) {
if (!options_rfc_enabled) {
printf("Got OACK while options are not enabled!\n");
send_error(peer, EBADOP);
return;
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
parse_options(peer, rp->th_stuff, n + 2);
}
if (read_init(fd, NULL, mode) < 0) {
warn("read_init()");
return;
}
1994-05-27 12:33:43 +00:00
block = 1;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
tftp_send(peer, &block, &tftp_stats);
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
read_close();
if (tftp_stats.amount > 0)
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printstats("Sent", verbose, &tftp_stats);
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
txrx_error = 1;
1994-05-27 12:33:43 +00:00
}
/*
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
* Receive a file.
1994-05-27 12:33:43 +00:00
*/
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
void
recvfile(int peer, char *port, int fd, char *name, char *mode)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
struct tftphdr *rp;
uint16_t block;
char recvbuffer[MAXPKTSIZE];
int n, i;
struct tftp_stats tftp_stats;
stats_init(&tftp_stats);
rp = (struct tftphdr *)recvbuffer;
if (port == NULL) {
struct servent *se;
se = getservbyname("tftp", "udp");
((struct sockaddr_in *)&peer_sock)->sin_port = se->s_port;
} else
((struct sockaddr_in *)&peer_sock)->sin_port =
htons(atoi(port));
for (i = 0; i < 12; i++) {
struct sockaddr_storage from;
/* Tell the other side what we want to do */
if (debug&DEBUG_SIMPLE)
printf("Requesting %s\n", name);
n = send_rrq(peer, name, mode);
if (n > 0) {
printf("Cannot send RRQ packet\n");
return;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/*
* The first packet we receive has the new destination port
* we have to send the next packets to.
*/
n = receive_packet(peer, recvbuffer,
MAXPKTSIZE, &from, timeoutpacket);
/* We got something useful! */
if (n >= 0) {
((struct sockaddr_in *)&peer_sock)->sin_port =
((struct sockaddr_in *)&from)->sin_port;
break;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/* We should retry if this happens */
if (n == RP_TIMEOUT) {
printf("Try %d, didn't receive answer from remote.\n",
i + 1);
continue;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/* Otherwise it is a fatal error */
1994-05-27 12:33:43 +00:00
break;
}
if (i == 12) {
printf("Transfer timed out.\n");
return;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (rp->th_opcode == ERROR) {
tftp_log(LOG_ERR, "Error code %d: %s", rp->th_code, rp->th_msg);
return;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (write_init(fd, NULL, mode) < 0) {
warn("write_init");
return;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/*
* If the first packet is an OACK packet instead of an DATA packet,
* handle it different.
*/
if (rp->th_opcode == OACK) {
if (!options_rfc_enabled) {
printf("Got OACK while options are not enabled!\n");
send_error(peer, EBADOP);
return;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
parse_options(peer, rp->th_stuff, n + 2);
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
n = send_ack(peer, 0);
if (n > 0) {
printf("Cannot send ACK on OACK.\n");
return;
}
block = 0;
tftp_receive(peer, &block, &tftp_stats, NULL, 0);
} else {
block = 1;
tftp_receive(peer, &block, &tftp_stats, rp, n);
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
write_close();
if (tftp_stats.amount > 0)
printstats("Received", verbose, &tftp_stats);
return;
}