freebsd-dev/sys/mips/conf/AP96

#
# Specific board setup for the Atheros AP96 reference board.
#
# The AP96 has the following hardware:
#
# + AR7161 CPU SoC
# + AR9223 2.4GHz 11n
# + AR9220 5GHz 11n
# + AR8316 10/100/1000 switch
# + m25p64 based 8MB flash
# + 64mb RAM
# + uboot environment

# $FreeBSD$

#NO_UNIVERSE

include		"AR71XX_BASE"
ident		"AP96"
hints		"AP96.hints"

options 	AR71XX_REALMEM=64*1024*1024

options 	AR71XX_ENV_UBOOT

# For DOS - enable if required
options 	MSDOSFS

# uncompress - to boot read-only lzma natively from flash
device		geom_uzip
options 	GEOM_UZIP
options 	ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"

# Used for the static uboot partition map
device          geom_map

# Options needed for the EEPROM based calibration/PCI configuration data.
options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
device		firmware		# Used by the above

# Options required for miiproxy and mdiobus
options 	ARGE_MDIO		# Export an MDIO bus separate from arge
device		miiproxy		# MDIO bus <-> MII PHY rendezvous

device		etherswitch
device		arswitch
Introduce configuration files for AP94 and AP96. This uses the new firmware(9) method for squirreling away the EEPROM contents from SPI flash so ath(4) can get to them later. It won't work out of the box just yet - you have to add this to if_ath_pci.c: #define ATH_EEPROM_FIRMWARE .. until I've added it as a configuration option and updated things. 2012-04-13 08:52:25 +00:00			`#`
			`# Specific board setup for the Atheros AP96 reference board.`
			`#`
			`# The AP96 has the following hardware:`
			`#`
			`# + AR7161 CPU SoC`
			`# + AR9223 2.4GHz 11n`
			`# + AR9220 5GHz 11n`
			`# + AR8316 10/100/1000 switch`
			`# + m25p64 based 8MB flash`
			`# + 64mb RAM`
			`# + uboot environment`

			`# $FreeBSD$`

Mark the mostly redundant kernels that just pull in something from _BASE as NO_UNIVERSE Differential Revision: https://reviews.freebsd.org/D4200 2015-11-19 01:58:12 +00:00			`#NO_UNIVERSE`

Introduce configuration files for AP94 and AP96. This uses the new firmware(9) method for squirreling away the EEPROM contents from SPI flash so ath(4) can get to them later. It won't work out of the box just yet - you have to add this to if_ath_pci.c: #define ATH_EEPROM_FIRMWARE .. until I've added it as a configuration option and updated things. 2012-04-13 08:52:25 +00:00			`include "AR71XX_BASE"`
			`ident "AP96"`
			`hints "AP96.hints"`

In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`options AR71XX_REALMEM=6410241024`
Introduce configuration files for AP94 and AP96. This uses the new firmware(9) method for squirreling away the EEPROM contents from SPI flash so ath(4) can get to them later. It won't work out of the box just yet - you have to add this to if_ath_pci.c: #define ATH_EEPROM_FIRMWARE .. until I've added it as a configuration option and updated things. 2012-04-13 08:52:25 +00:00
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`options AR71XX_ENV_UBOOT`
These are uboot, so mark them as such or booting from flash will not work. 2012-04-13 08:56:23 +00:00
Flesh out the rest of the AP96 board/config. 2012-04-13 20:23:32 +00:00			`# For DOS - enable if required`
			`options MSDOSFS`

			`# uncompress - to boot read-only lzma natively from flash`
Obsolete mkulzma(8) and geom_uncompress(4), their functionality is now provided by mkuzip(8) and geom_uzip(4) respectively. MFC after: 1 month 2016-02-24 00:39:36 +00:00			`device geom_uzip`
			`options GEOM_UZIP`
			`options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"`
Flesh out the rest of the AP96 board/config. 2012-04-13 20:23:32 +00:00
			`# Used for the static uboot partition map`
			`device geom_map`

			`# Options needed for the EEPROM based calibration/PCI configuration data.`
* Enable ATH_EEPROM_FIRMWARE, now that it's a compile time option * Tidy up things a bit. 2012-04-13 18:01:53 +00:00			`options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash`
			`options ATH_EEPROM_FIRMWARE # Use EEPROM from flash`
			`device firmware # Used by the above`
Convert AP96 to use the mdioproxy and ARGE_MDIO option. arge1 still works (it's the standalone PHY) but arge0 and the other switch ports don't work. They're enumerated though, demonstrating that the mdiobus abstraction is correctly working. 2012-05-01 06:21:02 +00:00
			`# Options required for miiproxy and mdiobus`
			`options ARGE_MDIO # Export an MDIO bus separate from arge`
			`device miiproxy # MDIO bus <-> MII PHY rendezvous`
Add switch support to AP96. 2012-05-11 21:13:43 +00:00
			`device etherswitch`
			`device arswitch`