freebsd-dev/module/zfs/zfs_log.c

677 lines
18 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
2008-11-20 20:01:55 +00:00
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysmacros.h>
#include <sys/cmn_err.h>
#include <sys/kmem.h>
#include <sys/thread.h>
#include <sys/file.h>
#include <sys/vfs.h>
#include <sys/zfs_znode.h>
#include <sys/zfs_dir.h>
#include <sys/zil.h>
#include <sys/zil_impl.h>
#include <sys/byteorder.h>
#include <sys/policy.h>
#include <sys/stat.h>
#include <sys/mode.h>
#include <sys/acl.h>
#include <sys/dmu.h>
#include <sys/spa.h>
#include <sys/zfs_fuid.h>
#include <sys/ddi.h>
2009-01-15 21:59:39 +00:00
#include <sys/dsl_dataset.h>
2008-11-20 20:01:55 +00:00
/*
2009-01-15 21:59:39 +00:00
* These zfs_log_* functions must be called within a dmu tx, in one
* of 2 contexts depending on zilog->z_replay:
*
* Non replay mode
* ---------------
* We need to record the transaction so that if it is committed to
* the Intent Log then it can be replayed. An intent log transaction
* structure (itx_t) is allocated and all the information necessary to
* possibly replay the transaction is saved in it. The itx is then assigned
* a sequence number and inserted in the in-memory list anchored in the zilog.
*
* Replay mode
* -----------
* We need to mark the intent log record as replayed in the log header.
* This is done in the same transaction as the replay so that they
* commit atomically.
2008-11-20 20:01:55 +00:00
*/
int
zfs_log_create_txtype(zil_create_t type, vsecattr_t *vsecp, vattr_t *vap)
{
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
int isxvattr = (vap->va_mask & ATTR_XVATTR);
2008-11-20 20:01:55 +00:00
switch (type) {
case Z_FILE:
if (vsecp == NULL && !isxvattr)
return (TX_CREATE);
if (vsecp && isxvattr)
return (TX_CREATE_ACL_ATTR);
if (vsecp)
return (TX_CREATE_ACL);
else
return (TX_CREATE_ATTR);
/*NOTREACHED*/
case Z_DIR:
if (vsecp == NULL && !isxvattr)
return (TX_MKDIR);
if (vsecp && isxvattr)
return (TX_MKDIR_ACL_ATTR);
if (vsecp)
return (TX_MKDIR_ACL);
else
return (TX_MKDIR_ATTR);
case Z_XATTRDIR:
return (TX_MKXATTR);
}
ASSERT(0);
return (TX_MAX_TYPE);
}
/*
* build up the log data necessary for logging xvattr_t
* First lr_attr_t is initialized. following the lr_attr_t
* is the mapsize and attribute bitmap copied from the xvattr_t.
* Following the bitmap and bitmapsize two 64 bit words are reserved
* for the create time which may be set. Following the create time
* records a single 64 bit integer which has the bits to set on
* replay for the xvattr.
*/
static void
zfs_log_xvattr(lr_attr_t *lrattr, xvattr_t *xvap)
{
uint32_t *bitmap;
uint64_t *attrs;
uint64_t *crtime;
xoptattr_t *xoap;
void *scanstamp;
int i;
xoap = xva_getxoptattr(xvap);
ASSERT(xoap);
lrattr->lr_attr_masksize = xvap->xva_mapsize;
bitmap = &lrattr->lr_attr_bitmap;
for (i = 0; i != xvap->xva_mapsize; i++, bitmap++) {
*bitmap = xvap->xva_reqattrmap[i];
}
/* Now pack the attributes up in a single uint64_t */
attrs = (uint64_t *)bitmap;
crtime = attrs + 1;
scanstamp = (caddr_t)(crtime + 2);
*attrs = 0;
if (XVA_ISSET_REQ(xvap, XAT_READONLY))
*attrs |= (xoap->xoa_readonly == 0) ? 0 :
XAT0_READONLY;
if (XVA_ISSET_REQ(xvap, XAT_HIDDEN))
*attrs |= (xoap->xoa_hidden == 0) ? 0 :
XAT0_HIDDEN;
if (XVA_ISSET_REQ(xvap, XAT_SYSTEM))
*attrs |= (xoap->xoa_system == 0) ? 0 :
XAT0_SYSTEM;
if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE))
*attrs |= (xoap->xoa_archive == 0) ? 0 :
XAT0_ARCHIVE;
if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE))
*attrs |= (xoap->xoa_immutable == 0) ? 0 :
XAT0_IMMUTABLE;
if (XVA_ISSET_REQ(xvap, XAT_NOUNLINK))
*attrs |= (xoap->xoa_nounlink == 0) ? 0 :
XAT0_NOUNLINK;
if (XVA_ISSET_REQ(xvap, XAT_APPENDONLY))
*attrs |= (xoap->xoa_appendonly == 0) ? 0 :
XAT0_APPENDONLY;
if (XVA_ISSET_REQ(xvap, XAT_OPAQUE))
*attrs |= (xoap->xoa_opaque == 0) ? 0 :
XAT0_APPENDONLY;
if (XVA_ISSET_REQ(xvap, XAT_NODUMP))
*attrs |= (xoap->xoa_nodump == 0) ? 0 :
XAT0_NODUMP;
if (XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED))
*attrs |= (xoap->xoa_av_quarantined == 0) ? 0 :
XAT0_AV_QUARANTINED;
if (XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED))
*attrs |= (xoap->xoa_av_modified == 0) ? 0 :
XAT0_AV_MODIFIED;
if (XVA_ISSET_REQ(xvap, XAT_CREATETIME))
ZFS_TIME_ENCODE(&xoap->xoa_createtime, crtime);
if (XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP))
bcopy(xoap->xoa_av_scanstamp, scanstamp, AV_SCANSTAMP_SZ);
if (XVA_ISSET_REQ(xvap, XAT_REPARSE))
*attrs |= (xoap->xoa_reparse == 0) ? 0 :
XAT0_REPARSE;
if (XVA_ISSET_REQ(xvap, XAT_OFFLINE))
*attrs |= (xoap->xoa_offline == 0) ? 0 :
XAT0_OFFLINE;
if (XVA_ISSET_REQ(xvap, XAT_SPARSE))
*attrs |= (xoap->xoa_sparse == 0) ? 0 :
XAT0_SPARSE;
2008-11-20 20:01:55 +00:00
}
static void *
zfs_log_fuid_ids(zfs_fuid_info_t *fuidp, void *start)
{
zfs_fuid_t *zfuid;
uint64_t *fuidloc = start;
/* First copy in the ACE FUIDs */
for (zfuid = list_head(&fuidp->z_fuids); zfuid;
zfuid = list_next(&fuidp->z_fuids, zfuid)) {
*fuidloc++ = zfuid->z_logfuid;
}
return (fuidloc);
}
static void *
zfs_log_fuid_domains(zfs_fuid_info_t *fuidp, void *start)
{
zfs_fuid_domain_t *zdomain;
/* now copy in the domain info, if any */
if (fuidp->z_domain_str_sz != 0) {
for (zdomain = list_head(&fuidp->z_domains); zdomain;
zdomain = list_next(&fuidp->z_domains, zdomain)) {
bcopy((void *)zdomain->z_domain, start,
strlen(zdomain->z_domain) + 1);
start = (caddr_t)start +
strlen(zdomain->z_domain) + 1;
}
}
return (start);
}
/*
* zfs_log_create() is used to handle TX_CREATE, TX_CREATE_ATTR, TX_MKDIR,
* TX_MKDIR_ATTR and TX_MKXATTR
* transactions.
*
* TX_CREATE and TX_MKDIR are standard creates, but they may have FUID
* domain information appended prior to the name. In this case the
* uid/gid in the log record will be a log centric FUID.
*
* TX_CREATE_ACL_ATTR and TX_MKDIR_ACL_ATTR handle special creates that
* may contain attributes, ACL and optional fuid information.
*
* TX_CREATE_ACL and TX_MKDIR_ACL handle special creates that specify
* and ACL and normal users/groups in the ACEs.
*
* There may be an optional xvattr attribute information similar
* to zfs_log_setattr.
*
* Also, after the file name "domain" strings may be appended.
*/
void
zfs_log_create(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, znode_t *zp, char *name, vsecattr_t *vsecp,
zfs_fuid_info_t *fuidp, vattr_t *vap)
{
itx_t *itx;
lr_create_t *lr;
lr_acl_create_t *lracl;
xvattr_t *xvap = (xvattr_t *)vap;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
size_t aclsize = 0;
2008-11-20 20:01:55 +00:00
size_t xvatsize = 0;
size_t txsize;
void *end;
size_t lrsize;
size_t namesize = strlen(name) + 1;
size_t fuidsz = 0;
if (zil_replaying(zilog, tx))
2008-11-20 20:01:55 +00:00
return;
/*
* If we have FUIDs present then add in space for
* domains and ACE fuid's if any.
*/
if (fuidp) {
fuidsz += fuidp->z_domain_str_sz;
fuidsz += fuidp->z_fuid_cnt * sizeof (uint64_t);
}
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if (vap->va_mask & ATTR_XVATTR)
2008-11-20 20:01:55 +00:00
xvatsize = ZIL_XVAT_SIZE(xvap->xva_mapsize);
if ((int)txtype == TX_CREATE_ATTR || (int)txtype == TX_MKDIR_ATTR ||
(int)txtype == TX_CREATE || (int)txtype == TX_MKDIR ||
(int)txtype == TX_MKXATTR) {
txsize = sizeof (*lr) + namesize + fuidsz + xvatsize;
lrsize = sizeof (*lr);
} else {
aclsize = (vsecp) ? vsecp->vsa_aclentsz : 0;
txsize =
sizeof (lr_acl_create_t) + namesize + fuidsz +
ZIL_ACE_LENGTH(aclsize) + xvatsize;
lrsize = sizeof (lr_acl_create_t);
}
itx = zil_itx_create(txtype, txsize);
lr = (lr_create_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
lr->lr_foid = zp->z_id;
lr->lr_mode = zp->z_mode;
if (!IS_EPHEMERAL(zp->z_uid)) {
lr->lr_uid = (uint64_t)zp->z_uid;
2008-11-20 20:01:55 +00:00
} else {
lr->lr_uid = fuidp->z_fuid_owner;
}
if (!IS_EPHEMERAL(zp->z_gid)) {
lr->lr_gid = (uint64_t)zp->z_gid;
2008-11-20 20:01:55 +00:00
} else {
lr->lr_gid = fuidp->z_fuid_group;
}
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(ZTOZSB(zp)), &lr->lr_gen,
sizeof (uint64_t));
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_CRTIME(ZTOZSB(zp)),
lr->lr_crtime, sizeof (uint64_t) * 2);
if (sa_lookup(zp->z_sa_hdl, SA_ZPL_RDEV(ZTOZSB(zp)), &lr->lr_rdev,
sizeof (lr->lr_rdev)) != 0)
lr->lr_rdev = 0;
2008-11-20 20:01:55 +00:00
/*
* Fill in xvattr info if any
*/
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if (vap->va_mask & ATTR_XVATTR) {
2008-11-20 20:01:55 +00:00
zfs_log_xvattr((lr_attr_t *)((caddr_t)lr + lrsize), xvap);
end = (caddr_t)lr + lrsize + xvatsize;
} else {
end = (caddr_t)lr + lrsize;
}
/* Now fill in any ACL info */
if (vsecp) {
lracl = (lr_acl_create_t *)&itx->itx_lr;
lracl->lr_aclcnt = vsecp->vsa_aclcnt;
lracl->lr_acl_bytes = aclsize;
lracl->lr_domcnt = fuidp ? fuidp->z_domain_cnt : 0;
lracl->lr_fuidcnt = fuidp ? fuidp->z_fuid_cnt : 0;
if (vsecp->vsa_aclflags & VSA_ACE_ACLFLAGS)
lracl->lr_acl_flags = (uint64_t)vsecp->vsa_aclflags;
else
lracl->lr_acl_flags = 0;
bcopy(vsecp->vsa_aclentp, end, aclsize);
end = (caddr_t)end + ZIL_ACE_LENGTH(aclsize);
}
/* drop in FUID info */
if (fuidp) {
end = zfs_log_fuid_ids(fuidp, end);
end = zfs_log_fuid_domains(fuidp, end);
}
/*
* Now place file name in log record
*/
bcopy(name, end, namesize);
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_remove() handles both TX_REMOVE and TX_RMDIR transactions.
*/
void
zfs_log_remove(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, char *name, uint64_t foid)
2008-11-20 20:01:55 +00:00
{
itx_t *itx;
lr_remove_t *lr;
size_t namesize = strlen(name) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 20:01:55 +00:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + namesize);
lr = (lr_remove_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
bcopy(name, (char *)(lr + 1), namesize);
itx->itx_oid = foid;
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_link() handles TX_LINK transactions.
*/
void
zfs_log_link(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, znode_t *zp, char *name)
{
itx_t *itx;
lr_link_t *lr;
size_t namesize = strlen(name) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 20:01:55 +00:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + namesize);
lr = (lr_link_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
lr->lr_link_obj = zp->z_id;
bcopy(name, (char *)(lr + 1), namesize);
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_symlink() handles TX_SYMLINK transactions.
*/
void
zfs_log_symlink(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, znode_t *zp, char *name, char *link)
{
itx_t *itx;
lr_create_t *lr;
size_t namesize = strlen(name) + 1;
size_t linksize = strlen(link) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 20:01:55 +00:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + namesize + linksize);
lr = (lr_create_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
lr->lr_foid = zp->z_id;
lr->lr_uid = zp->z_uid;
lr->lr_gid = zp->z_gid;
lr->lr_mode = zp->z_mode;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(ZTOZSB(zp)), &lr->lr_gen,
sizeof (uint64_t));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_CRTIME(ZTOZSB(zp)),
lr->lr_crtime, sizeof (uint64_t) * 2);
2008-11-20 20:01:55 +00:00
bcopy(name, (char *)(lr + 1), namesize);
bcopy(link, (char *)(lr + 1) + namesize, linksize);
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_rename() handles TX_RENAME transactions.
*/
void
zfs_log_rename(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *sdzp, char *sname, znode_t *tdzp, char *dname, znode_t *szp)
{
itx_t *itx;
lr_rename_t *lr;
size_t snamesize = strlen(sname) + 1;
size_t dnamesize = strlen(dname) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 20:01:55 +00:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + snamesize + dnamesize);
lr = (lr_rename_t *)&itx->itx_lr;
lr->lr_sdoid = sdzp->z_id;
lr->lr_tdoid = tdzp->z_id;
bcopy(sname, (char *)(lr + 1), snamesize);
bcopy(dname, (char *)(lr + 1) + snamesize, dnamesize);
itx->itx_oid = szp->z_id;
2008-11-20 20:01:55 +00:00
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_write() handles TX_WRITE transactions.
*/
long zfs_immediate_write_sz = 32768;
2008-11-20 20:01:55 +00:00
void
zfs_log_write(zilog_t *zilog, dmu_tx_t *tx, int txtype,
znode_t *zp, offset_t off, ssize_t resid, int ioflag)
{
itx_wr_state_t write_state;
boolean_t slogging;
ssize_t immediate_write_sz;
2008-11-20 20:01:55 +00:00
if (zil_replaying(zilog, tx) || zp->z_unlinked)
2008-11-20 20:01:55 +00:00
return;
immediate_write_sz = (zilog->zl_logbias == ZFS_LOGBIAS_THROUGHPUT)
? 0 : (ssize_t)zfs_immediate_write_sz;
2009-01-15 21:59:39 +00:00
slogging = spa_has_slogs(zilog->zl_spa) &&
(zilog->zl_logbias == ZFS_LOGBIAS_LATENCY);
if (resid > immediate_write_sz && !slogging && resid <= zp->z_blksz)
2008-11-20 20:01:55 +00:00
write_state = WR_INDIRECT;
else if (ioflag & (FSYNC | FDSYNC))
write_state = WR_COPIED;
else
write_state = WR_NEED_COPY;
while (resid) {
itx_t *itx;
lr_write_t *lr;
ssize_t len;
/*
* If the write would overflow the largest block then split it.
2008-11-20 20:01:55 +00:00
*/
if (write_state != WR_INDIRECT && resid > ZIL_MAX_LOG_DATA)
2008-11-20 20:01:55 +00:00
len = SPA_MAXBLOCKSIZE >> 1;
else
len = resid;
itx = zil_itx_create(txtype, sizeof (*lr) +
(write_state == WR_COPIED ? len : 0));
lr = (lr_write_t *)&itx->itx_lr;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (write_state == WR_COPIED && dmu_read(ZTOZSB(zp)->z_os,
2009-07-02 22:44:48 +00:00
zp->z_id, off, len, lr + 1, DMU_READ_NO_PREFETCH) != 0) {
zil_itx_destroy(itx);
2008-11-20 20:01:55 +00:00
itx = zil_itx_create(txtype, sizeof (*lr));
lr = (lr_write_t *)&itx->itx_lr;
write_state = WR_NEED_COPY;
}
itx->itx_wr_state = write_state;
if (write_state == WR_NEED_COPY)
itx->itx_sod += len;
lr->lr_foid = zp->z_id;
lr->lr_offset = off;
lr->lr_length = len;
lr->lr_blkoff = 0;
BP_ZERO(&lr->lr_blkptr);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
itx->itx_private = ZTOZSB(zp);
2008-11-20 20:01:55 +00:00
if (!(ioflag & (FSYNC | FDSYNC)) && (zp->z_sync_cnt == 0))
2008-11-20 20:01:55 +00:00
itx->itx_sync = B_FALSE;
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
off += len;
resid -= len;
}
}
/*
* zfs_log_truncate() handles TX_TRUNCATE transactions.
*/
void
zfs_log_truncate(zilog_t *zilog, dmu_tx_t *tx, int txtype,
znode_t *zp, uint64_t off, uint64_t len)
{
itx_t *itx;
lr_truncate_t *lr;
if (zil_replaying(zilog, tx) || zp->z_unlinked)
2008-11-20 20:01:55 +00:00
return;
itx = zil_itx_create(txtype, sizeof (*lr));
lr = (lr_truncate_t *)&itx->itx_lr;
lr->lr_foid = zp->z_id;
lr->lr_offset = off;
lr->lr_length = len;
itx->itx_sync = (zp->z_sync_cnt != 0);
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_setattr() handles TX_SETATTR transactions.
*/
void
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
zfs_log_setattr(zilog_t *zilog, dmu_tx_t *tx, int txtype,
znode_t *zp, vattr_t *vap, uint_t mask_applied, zfs_fuid_info_t *fuidp)
2008-11-20 20:01:55 +00:00
{
itx_t *itx;
lr_setattr_t *lr;
xvattr_t *xvap = (xvattr_t *)vap;
size_t recsize = sizeof (lr_setattr_t);
void *start;
if (zil_replaying(zilog, tx) || zp->z_unlinked)
2008-11-20 20:01:55 +00:00
return;
/*
* If XVATTR set, then log record size needs to allow
* for lr_attr_t + xvattr mask, mapsize and create time
* plus actual attribute values
*/
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if (vap->va_mask & ATTR_XVATTR)
2008-11-20 20:01:55 +00:00
recsize = sizeof (*lr) + ZIL_XVAT_SIZE(xvap->xva_mapsize);
if (fuidp)
recsize += fuidp->z_domain_str_sz;
itx = zil_itx_create(txtype, recsize);
lr = (lr_setattr_t *)&itx->itx_lr;
lr->lr_foid = zp->z_id;
lr->lr_mask = (uint64_t)mask_applied;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
lr->lr_mode = (uint64_t)vap->va_mode;
if ((mask_applied & ATTR_UID) && IS_EPHEMERAL(vap->va_uid))
2008-11-20 20:01:55 +00:00
lr->lr_uid = fuidp->z_fuid_owner;
else
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
lr->lr_uid = (uint64_t)vap->va_uid;
2008-11-20 20:01:55 +00:00
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if ((mask_applied & ATTR_GID) && IS_EPHEMERAL(vap->va_gid))
2008-11-20 20:01:55 +00:00
lr->lr_gid = fuidp->z_fuid_group;
else
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
lr->lr_gid = (uint64_t)vap->va_gid;
2008-11-20 20:01:55 +00:00
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
lr->lr_size = (uint64_t)vap->va_size;
ZFS_TIME_ENCODE(&vap->va_atime, lr->lr_atime);
ZFS_TIME_ENCODE(&vap->va_mtime, lr->lr_mtime);
2008-11-20 20:01:55 +00:00
start = (lr_setattr_t *)(lr + 1);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if (vap->va_mask & ATTR_XVATTR) {
2008-11-20 20:01:55 +00:00
zfs_log_xvattr((lr_attr_t *)start, xvap);
start = (caddr_t)start + ZIL_XVAT_SIZE(xvap->xva_mapsize);
}
/*
* Now stick on domain information if any on end
*/
if (fuidp)
(void) zfs_log_fuid_domains(fuidp, start);
itx->itx_sync = (zp->z_sync_cnt != 0);
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
/*
* zfs_log_acl() handles TX_ACL transactions.
*/
void
zfs_log_acl(zilog_t *zilog, dmu_tx_t *tx, znode_t *zp,
vsecattr_t *vsecp, zfs_fuid_info_t *fuidp)
{
itx_t *itx;
lr_acl_v0_t *lrv0;
lr_acl_t *lr;
int txtype;
int lrsize;
size_t txsize;
size_t aclbytes = vsecp->vsa_aclentsz;
if (zil_replaying(zilog, tx) || zp->z_unlinked)
return;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
txtype = (ZTOZSB(zp)->z_version < ZPL_VERSION_FUID) ?
2008-11-20 20:01:55 +00:00
TX_ACL_V0 : TX_ACL;
if (txtype == TX_ACL)
lrsize = sizeof (*lr);
else
lrsize = sizeof (*lrv0);
txsize = lrsize +
((txtype == TX_ACL) ? ZIL_ACE_LENGTH(aclbytes) : aclbytes) +
(fuidp ? fuidp->z_domain_str_sz : 0) +
sizeof (uint64_t) * (fuidp ? fuidp->z_fuid_cnt : 0);
2008-11-20 20:01:55 +00:00
itx = zil_itx_create(txtype, txsize);
lr = (lr_acl_t *)&itx->itx_lr;
lr->lr_foid = zp->z_id;
if (txtype == TX_ACL) {
lr->lr_acl_bytes = aclbytes;
lr->lr_domcnt = fuidp ? fuidp->z_domain_cnt : 0;
lr->lr_fuidcnt = fuidp ? fuidp->z_fuid_cnt : 0;
if (vsecp->vsa_mask & VSA_ACE_ACLFLAGS)
lr->lr_acl_flags = (uint64_t)vsecp->vsa_aclflags;
else
lr->lr_acl_flags = 0;
}
lr->lr_aclcnt = (uint64_t)vsecp->vsa_aclcnt;
if (txtype == TX_ACL_V0) {
lrv0 = (lr_acl_v0_t *)lr;
bcopy(vsecp->vsa_aclentp, (ace_t *)(lrv0 + 1), aclbytes);
} else {
void *start = (ace_t *)(lr + 1);
bcopy(vsecp->vsa_aclentp, start, aclbytes);
start = (caddr_t)start + ZIL_ACE_LENGTH(aclbytes);
if (fuidp) {
start = zfs_log_fuid_ids(fuidp, start);
(void) zfs_log_fuid_domains(fuidp, start);
}
}
itx->itx_sync = (zp->z_sync_cnt != 0);
zil_itx_assign(zilog, itx, tx);
2008-11-20 20:01:55 +00:00
}
#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(zfs_immediate_write_sz, long, 0644);
MODULE_PARM_DESC(zfs_immediate_write_sz, "Largest data block to write to zil");
#endif