freebsd-dev/sys/dev/usb/usbdevs_data.h

2252 lines
41 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/*
* THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT.
*
* generated from:
2000-05-09 20:45:14 +00:00
* FreeBSD: src/sys/dev/usb/usbdevs,v 1.25 2000/05/09 20:43:37 n_hibma Exp
*/
/*
2000-04-03 15:15:50 +00:00
* Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
2000-05-07 19:44:44 +00:00
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
struct usb_knowndev usb_knowndevs[] = {
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_3COM, USB_PRODUCT_3COM_HOMECONN,
0,
2000-04-03 15:15:50 +00:00
"3Com Corp.",
2000-01-20 07:39:19 +00:00
"HomeConnect USB Camera",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_3COM, USB_PRODUCT_3COM_3C19250,
0,
2000-04-03 15:15:50 +00:00
"3Com Corp.",
2000-01-20 07:39:19 +00:00
"3C19250 Ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_3COM, USB_PRODUCT_3COM_USR56K,
0,
2000-04-03 15:15:50 +00:00
"3Com Corp.",
2000-01-20 07:39:19 +00:00
"U.S.Robotics 56000 Voice Faxmodem Pro",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_3COM, USB_PRODUCT_3COM_3C460,
0,
"3Com Corp.",
"HomeConnect Ethernet USB Adapter",
},
{
USB_VENDOR_3COMUSR, USB_PRODUCT_3COMUSR_OFFICECONN,
0,
"U.S. Robotics",
"3Com OfficeConnect Analog Modem",
},
{
USB_VENDOR_3COMUSR, USB_PRODUCT_3COMUSR_USRISDN,
0,
"U.S. Robotics",
"3Com U.S. Robotics Pro ISDN TA",
},
{
USB_VENDOR_3COMUSR, USB_PRODUCT_3COMUSR_HOMECONN,
0,
"U.S. Robotics",
"3Com HomeConnect camera",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_3COMUSR, USB_PRODUCT_3COMUSR_USR56K,
0,
2000-01-20 07:39:19 +00:00
"U.S. Robotics",
"U.S.Robotics 56000 Voice Faxmodem Pro",
},
{
2000-03-20 18:30:34 +00:00
USB_VENDOR_ACERP, USB_PRODUCT_ACERP_ACERSCAN_C310U,
0,
2000-04-03 15:15:50 +00:00
"Acer Peripherals, Inc.",
2000-01-20 07:39:19 +00:00
"Acerscan C310U",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ACTIVEWIRE, USB_PRODUCT_ACTIVEWIRE_IOBOARD,
0,
2000-04-03 15:15:50 +00:00
"ActiveWire, Inc.",
2000-01-20 07:39:19 +00:00
"I/O Board",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ACTIVEWIRE, USB_PRODUCT_ACTIVEWIRE_IOBOARD_FW1,
0,
2000-04-03 15:15:50 +00:00
"ActiveWire, Inc.",
2000-01-20 07:39:19 +00:00
"I/O Board, rev. 1 firmware",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS,
0,
2000-04-03 15:15:50 +00:00
"ADMtek, Inc.",
2000-01-20 07:39:19 +00:00
"AN986 USB Ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BT,
0,
2000-03-20 18:30:34 +00:00
"ADS Technologies, Inc.",
2000-01-20 07:39:19 +00:00
"UBS-10BT Ethernet adapter",
},
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_MOUSE29UO,
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
0,
2000-01-20 07:39:19 +00:00
"Elecom Corp. Ltd.",
"mouse 29UO",
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
},
2000-01-13 20:17:11 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_AKS, USB_PRODUCT_AKS_USBHASP,
2000-01-13 20:17:11 +00:00
0,
2000-03-20 18:30:34 +00:00
"Aladdin Knowledge Systems",
2000-01-20 07:39:19 +00:00
"USB-HASP 0.06",
2000-01-13 20:17:11 +00:00
},
2000-05-09 20:45:14 +00:00
{
USB_VENDOR_ALCOR, USB_PRODUCT_ALCOR_STRONGMAN,
0,
"Alcor Micro, Inc.",
"Strong Man Keyboard hub",
},
{
USB_VENDOR_ALCOR, USB_PRODUCT_ALCOR_STRONGMAN_KBD,
0,
"Alcor Micro, Inc.",
"Strong Man Keyboard",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_ALTEC, USB_PRODUCT_ALTEC_ADA70,
0,
"Altec Lansing Technologies, Inc.",
"ADA70 Speakers",
},
2000-01-13 20:17:11 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ALTEC, USB_PRODUCT_ALTEC_ASC495,
2000-01-13 20:17:11 +00:00
0,
2000-03-20 18:30:34 +00:00
"Altec Lansing Technologies, Inc.",
2000-01-20 07:39:19 +00:00
"ASC495 Speakers",
2000-01-13 20:17:11 +00:00
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_APC, USB_PRODUCT_APC_UPSPRO500,
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
0,
2000-01-20 07:39:19 +00:00
"American Power Conversion",
"Back-UPS Pro 500",
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ANCHOR, USB_PRODUCT_ANCHOR_EZUSB,
0,
2000-04-03 15:15:50 +00:00
"Anchor Chips, Inc.",
2000-01-20 07:39:19 +00:00
"EZUSB",
1999-08-28 09:39:54 +00:00
},
2000-05-01 20:31:01 +00:00
{
USB_VENDOR_ANCHOR, USB_PRODUCT_ANCHOR_EZLINK,
0,
"Anchor Chips, Inc.",
"EZLINK",
},
2000-01-13 20:17:11 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_AOX, USB_PRODUCT_AOX_USB101,
2000-01-13 20:17:11 +00:00
0,
2000-04-03 15:15:50 +00:00
"AOX, Inc.",
2000-01-20 07:39:19 +00:00
"USB ethernet controller engine",
2000-01-13 20:17:11 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC1284,
0,
2000-03-20 18:30:34 +00:00
"ATEN International Co. Ltd.",
2000-01-20 07:39:19 +00:00
"Parallel printer adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC10T,
0,
2000-03-20 18:30:34 +00:00
"ATEN International Co. Ltd.",
2000-01-20 07:39:19 +00:00
"10Mbps ethernet adapter",
},
1999-08-28 09:39:54 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100,
1999-08-28 09:39:54 +00:00
0,
2000-03-20 19:49:50 +00:00
"Billionton Systems, Inc.",
2000-01-20 07:39:19 +00:00
"USB100N 10/100 FastEthernet Adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_BROTHER, USB_PRODUCT_BROTHER_HL1050,
0,
2000-03-20 19:49:50 +00:00
"Brother Industries, Ltd.",
2000-01-20 07:39:19 +00:00
"HL-1050 laser printer",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_BTC, USB_PRODUCT_BTC_BTC7932,
0,
2000-04-03 15:15:50 +00:00
"Behavior Tech. Computer",
2000-01-20 07:39:19 +00:00
"Keyboard with mouse port",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CANON, USB_PRODUCT_CANON_S10,
0,
2000-04-03 15:15:50 +00:00
"Canon, Inc.",
2000-01-20 07:39:19 +00:00
"PowerShot S10",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE,
1999-08-28 09:39:54 +00:00
0,
2000-01-20 07:39:19 +00:00
"Computer Access Technology Corp.",
"Netmate ethernet adapter",
1999-08-28 09:39:54 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE2,
0,
2000-01-20 07:39:19 +00:00
"Computer Access Technology Corp.",
"Netmate2 ethernet adapter",
1999-08-28 09:39:54 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CATC, USB_PRODUCT_CATC_CHIEF,
1999-08-28 09:39:54 +00:00
0,
2000-01-20 07:39:19 +00:00
"Computer Access Technology Corp.",
"USB Chief Bus & Protocol Analyzer",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CATC, USB_PRODUCT_CATC_ANDROMEDA,
0,
2000-01-20 07:39:19 +00:00
"Computer Access Technology Corp.",
"Andromeda hub",
},
{
USB_VENDOR_CHERRY, USB_PRODUCT_CHERRY_MY3000KBD,
0,
1999-08-28 09:39:54 +00:00
"Cherry Mikroschalter GmbH",
"My3000 keyboard",
},
{
USB_VENDOR_CHERRY, USB_PRODUCT_CHERRY_MY3000HUB,
0,
1999-08-28 09:39:54 +00:00
"Cherry Mikroschalter GmbH",
"My3000 hub",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CHIC, USB_PRODUCT_CHIC_MOUSE1,
0,
2000-01-20 07:39:19 +00:00
"Chic Technology",
"mouse",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_CHIC, USB_PRODUCT_CHIC_CYPRESS,
0,
"Chic Technology",
"Cypress USB Mouse",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CHICONY, USB_PRODUCT_CHICONY_KB8933,
0,
2000-01-20 07:39:19 +00:00
"Chicony Electronics Co., Ltd.",
"KB-8933 keyboard",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CONNECTIX, USB_PRODUCT_CONNECTIX_QUICKCAM,
0,
2000-01-20 07:39:19 +00:00
"Connectix Corp.",
"QuickCam",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_COREGA, USB_PRODUCT_COREGA_ETHER_USB_T,
0,
2000-01-20 07:39:19 +00:00
"Corega",
"Ether USB-T",
},
2000-03-09 16:29:49 +00:00
{
USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TX,
0,
"Corega",
"FEther USB-TX",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_MOUSE,
0,
2000-01-20 07:39:19 +00:00
"Cypress Semiconductor",
"mouse",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_THERMO,
0,
2000-01-20 07:39:19 +00:00
"Cypress Semiconductor",
"thermometer",
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_FMRADIO,
0,
"Cypress Semiconductor",
"FM Radio",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650C,
0,
2000-01-20 07:39:19 +00:00
"D-Link Corp",
"10Mbps ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX,
0,
2000-01-20 07:39:19 +00:00
"D-Link Corp",
"10/100 ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX_PNA,
0,
2000-01-20 07:39:19 +00:00
"D-Link Corp",
"1/10/100 ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_DALLAS, USB_PRODUCT_DALLAS_J6502,
0,
2000-01-20 07:39:19 +00:00
"Dallas Semiconductor",
"J-6502 speakers",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_DIAMOND, USB_PRODUCT_DIAMOND_RIO500USB,
0,
2000-01-20 07:39:19 +00:00
"Diamond",
"Rio 500 USB",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_DIGI, USB_PRODUCT_DIGI_ACCELEPORT2,
0,
"Digi International",
"AccelePort USB 2",
},
{
USB_VENDOR_DIGI, USB_PRODUCT_DIGI_ACCELEPORT4,
0,
"Digi International",
"AccelePort USB 4",
},
{
USB_VENDOR_DIGI, USB_PRODUCT_DIGI_ACCELEPORT8,
0,
"Digi International",
"AccelePort USB 8",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_EIZO, USB_PRODUCT_EIZO_HUB,
0,
2000-01-20 07:39:19 +00:00
"EIZO",
"hub",
},
2000-01-13 20:17:11 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_EIZO, USB_PRODUCT_EIZO_MONITOR,
2000-01-13 20:17:11 +00:00
0,
2000-01-20 07:39:19 +00:00
"EIZO",
"monitor",
2000-01-13 20:17:11 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ELSA, USB_PRODUCT_ELSA_MODEM1,
0,
2000-01-20 07:39:19 +00:00
"ELSA Gmbh",
"ELSA Modem Board",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_1S,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"1S serial connector",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_2S,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"2S serial connector",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_1S25,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"1S25 serial connector",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_4S,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"4S serial connector",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_E45,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"E45 Ethernet adapter",
},
1999-08-28 09:39:54 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_CENTRONICS,
1999-08-28 09:39:54 +00:00
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"Centronics connector",
1999-08-28 09:39:54 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_1S9,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"1S9 serial connector",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_EZUSB,
0,
2000-01-20 07:39:19 +00:00
"Entrega",
"EZ-USB",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ETEK, USB_PRODUCT_ETEK_1COM,
0,
2000-01-20 07:39:19 +00:00
"e-TEK Labs",
"Serial port",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_EPSON, USB_PRODUCT_EPSON_PRINTER2,
0,
2000-01-20 07:39:19 +00:00
"Seiko Epson Corp.",
"ISD USB Smart Cable for Mac",
},
2000-01-13 20:17:11 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_EPSON, USB_PRODUCT_EPSON_PRINTER3,
2000-01-13 20:17:11 +00:00
0,
2000-01-20 07:39:19 +00:00
"Seiko Epson Corp.",
"ISD USB Smart Cable",
2000-01-13 20:17:11 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_GRAVIS, USB_PRODUCT_GRAVIS_GAMEPADPRO,
0,
2000-01-20 07:39:19 +00:00
"Advanced Gravis Computer Tech. Ltd.",
"GamePad Pro",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_FREECOM, USB_PRODUCT_FREECOM_DVD,
0,
"Freecom",
"Connector for DVD drive",
},
{
2000-05-07 19:44:44 +00:00
USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL,
2000-04-03 15:15:50 +00:00
0,
"Future Technology Devices",
"Serial converter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HANDSPRING, USB_PRODUCT_HANDSPRING_VISOR,
0,
2000-04-03 15:15:50 +00:00
"Handspring, Inc.",
2000-01-20 07:39:19 +00:00
"Handspring Visor",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HP, USB_PRODUCT_HP_4100C,
0,
2000-01-20 07:39:19 +00:00
"Hewlett Packard",
"Scanjet 4100C",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HP, USB_PRODUCT_HP_S20,
0,
2000-01-20 07:39:19 +00:00
"Hewlett Packard",
"Photosmart S20",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_HP, USB_PRODUCT_HP_4200C,
0,
"Hewlett Packard",
"ScanJet 4200C",
},
{
USB_VENDOR_HP, USB_PRODUCT_HP_6200C,
0,
"Hewlett Packard",
"ScanJet 6200C",
},
{
USB_VENDOR_HP, USB_PRODUCT_HP_S20b,
0,
"Hewlett Packard",
"PhotoSmart S20",
},
{
USB_VENDOR_HP, USB_PRODUCT_HP_3300C,
0,
"Hewlett Packard",
"ScanJet 3300C",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HP, USB_PRODUCT_HP_5200,
0,
2000-01-20 07:39:19 +00:00
"Hewlett Packard",
"Scanjet 5200",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HP, USB_PRODUCT_HP_6300C,
0,
2000-01-20 07:39:19 +00:00
"Hewlett Packard",
"Scanjet 6300C",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HP, USB_PRODUCT_HP_970CSE,
0,
2000-01-20 07:39:19 +00:00
"Hewlett Packard",
"Deskjet 970Cse",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_HP, USB_PRODUCT_HP_P1100,
0,
2000-01-20 07:39:19 +00:00
"Hewlett Packard",
"Photosmart P1100",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_INSIDEOUT, USB_PRODUCT_INSIDEOUT_EDGEPORT4,
0,
2000-01-20 07:39:19 +00:00
"Inside Out Networks",
"EdgePort/4 serial ports",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_INSYSTEM, USB_PRODUCT_INSYSTEM_F5U002,
0,
2000-01-20 07:39:19 +00:00
"In-System Design",
"Parallel printer adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_INSYSTEM, USB_PRODUCT_INSYSTEM_ISD110,
0,
2000-01-20 07:39:19 +00:00
"In-System Design",
2000-05-07 19:44:44 +00:00
"IDE adapter ISD110",
},
{
USB_VENDOR_INSYSTEM, USB_PRODUCT_INSYSTEM_ISD105,
0,
"In-System Design",
"IDE adapter ISD105",
},
1999-08-28 09:39:54 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_INTEL, USB_PRODUCT_INTEL_TESTBOARD,
1999-08-28 09:39:54 +00:00
0,
2000-01-20 07:39:19 +00:00
"Intel",
"82930 test board",
1999-08-28 09:39:54 +00:00
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETTX,
0,
"I/O Data",
"USB ETTX",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_IOMEGA, USB_PRODUCT_IOMEGA_ZIP100,
0,
2000-01-20 07:39:19 +00:00
"Iomega Corp.",
"Zip 100",
},
2000-04-06 10:19:16 +00:00
{
USB_VENDOR_IOMEGA, USB_PRODUCT_IOMEGA_ZIP250,
0,
"Iomega Corp.",
"Zip 250",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BT,
0,
"Kawasaki LSI",
"USB ethernet controller engine",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KAWATSU, USB_PRODUCT_KAWATSU_MH4000P,
0,
2000-01-20 07:39:19 +00:00
"Kawatsu Semiconductor, Inc.",
"MiniHub 4000P",
},
2000-03-29 15:08:02 +00:00
{
USB_VENDOR_KEISOKUGIKEN, USB_PRODUCT_KEISOKUGIKEN_USBDAQ,
0,
"Keisokugiken Corp.",
"HKS-0200 USBDAQ",
},
2000-03-29 19:46:41 +00:00
{
USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BT,
0,
"Kawasaki LSI",
"10BT Ethernet adapter, in the DU-H3E",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_KENSINGTON, USB_PRODUCT_KENSINGTON_ORBIT,
0,
"Kensington",
"Orbit USB/PS2 trackball",
},
{
USB_VENDOR_KENSINGTON, USB_PRODUCT_KENSINGTON_TURBOBALL,
0,
"Kensington",
"TurboBall",
},
{
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC220,
0,
"Eastman Kodak Corp.",
"Digital Science DC220",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC260,
0,
2000-01-20 07:39:19 +00:00
"Eastman Kodak Corp.",
"Digital Science DC260",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC265,
0,
2000-01-20 07:39:19 +00:00
"Eastman Kodak Corp.",
"Digital Science DC265",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC290,
0,
2000-01-20 07:39:19 +00:00
"Eastman Kodak Corp.",
"Digital Science DC290",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC240,
0,
2000-01-20 07:39:19 +00:00
"Eastman Kodak Corp.",
"Digital Science DC240",
},
1999-05-01 13:16:35 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC280,
1999-05-01 13:16:35 +00:00
0,
2000-01-20 07:39:19 +00:00
"Eastman Kodak Corp.",
"Digital Science DC280",
1999-05-01 13:16:35 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KONICA, USB_PRODUCT_KONICA_CAMERA,
0,
2000-01-20 07:39:19 +00:00
"Konica Corp.",
"Digital Color Camera",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KYE, USB_PRODUCT_KYE_NICHE,
0,
2000-01-20 07:39:19 +00:00
"KYE Systems Corp.",
"Niche mouse",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_KYE, USB_PRODUCT_KYE_NETSCROLL,
0,
"KYE Systems Corp.",
"Genius NetScroll mouse",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_KYE, USB_PRODUCT_KYE_FLIGHT2000,
0,
2000-01-20 07:39:19 +00:00
"KYE Systems Corp.",
"Flight 2000 joystick",
},
{
USB_VENDOR_LEXMARK, USB_PRODUCT_LEXMARK_S2450,
0,
2000-04-03 15:15:50 +00:00
"Lexmark International, Inc.",
2000-01-20 07:39:19 +00:00
"Optra S 2450",
},
{
USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10T,
0,
2000-04-03 15:15:50 +00:00
"Linksys, Inc.",
"USB10T Ethernet",
},
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX,
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
0,
2000-04-03 15:15:50 +00:00
"Linksys, Inc.",
2000-01-20 07:39:19 +00:00
"USB100TX Ethernet",
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100H1,
0,
"Linksys, Inc.",
"USB100H1 Ethernet/HPNA",
},
{
USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TA,
0,
2000-04-03 15:15:50 +00:00
"Linksys, Inc.",
"USB10TA Ethernet",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_M2452,
0,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
"M2452 keyboard",
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_M4848,
0,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
1999-08-28 09:39:54 +00:00
"M4848 mouse",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAM,
0,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
"QuickCam",
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO,
0,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
"QuickCam Pro",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_N43,
0,
"Logitech, Inc.",
"N43",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_N48,
0,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
"N48 mouse",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_MBA47,
1999-08-28 09:39:54 +00:00
0,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
"M-BA47 mouse",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_WMMOUSE,
0,
"Logitech, Inc.",
"WingMan Gaming Mouse",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_WMPAD,
0,
"Logitech, Inc.",
"WingMan GamePad Extreme",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_WMJOY,
0,
"Logitech, Inc.",
"WingMan Force joystick",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_LUCENT, USB_PRODUCT_LUCENT_EVALKIT,
0,
2000-01-20 07:39:19 +00:00
"Lucent",
"USS-720 evaluation kit",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_MACALLY, USB_PRODUCT_MACALLY_MOUSE1,
0,
2000-01-20 07:39:19 +00:00
"Macally",
"mouse",
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_MCT, USB_PRODUCT_MCT_HUB0100,
0,
"MCT Corp.",
"Hub",
},
{
USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232,
0,
"MCT Corp.",
"USB-232 Interface",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX,
0,
2000-04-03 15:15:50 +00:00
"Melco, Inc.",
2000-01-20 07:39:19 +00:00
"LU-ATX Ethernet",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_SIDEPREC,
0,
"Microsoft",
"SideWinder Precision Pro",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_INTELLIMOUSE,
0,
2000-01-20 07:39:19 +00:00
"Microsoft",
"IntelliMouse",
},
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_NATURALKBD,
0,
"Microsoft",
"Natural Keyboard Elite",
},
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_DDS80,
0,
"Microsoft",
"Digital Sound System 80",
},
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_SIDEWINDER,
0,
"Microsoft",
"Sidewinder Precision Racing Wheel",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_INTELLIEYE,
0,
"Microsoft",
"IntelliEye mouse",
},
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_INETPRO,
0,
"Microsoft",
"Internet Keyboard Pro",
},
2000-01-20 07:39:19 +00:00
{
USB_VENDOR_MIDIMAN, USB_PRODUCT_MIDIMAN_MIDISPORT2X2,
0,
"Midiman",
"Midisport 2x2",
},
{
USB_VENDOR_MOTOROLA, USB_PRODUCT_MOTOROLA_MC141555,
0,
"Motorola",
"MC141555 hub controller",
},
1999-06-27 22:28:02 +00:00
{
USB_VENDOR_MULTITECH, USB_PRODUCT_MULTITECH_ATLAS,
0,
"MultiTech",
"MT5634ZBA-USB modem",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_MUSTEK, USB_PRODUCT_MUSTEK_MDC800,
0,
2000-04-03 15:15:50 +00:00
"Mustek Systems, Inc.",
2000-01-20 07:39:19 +00:00
"MDC-800 digital camera",
},
{
USB_VENDOR_NEC, USB_PRODUCT_NEC_HUB,
0,
"NEC",
"hub",
},
{
USB_VENDOR_NEC, USB_PRODUCT_NEC_HUB_B,
0,
"NEC",
"hub",
},
{
USB_VENDOR_NETCHIP, USB_PRODUCT_NETCHIP_TURBOCONNECT,
0,
"NetChip Technology",
"Turbo-Connect",
},
{
USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101,
0,
2000-04-03 15:15:50 +00:00
"BayNETGEAR, Inc.",
"Ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_OMNIVISION, USB_PRODUCT_OMNIVISION_OV511,
0,
2000-01-20 07:39:19 +00:00
"OmniVision",
"OV511 Camera",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_PALM, USB_PRODUCT_PALM_SERIAL,
0,
"Palm Computing, Inc.",
"USB Serial Adaptor",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_SERIAL1,
0,
2000-04-03 15:15:50 +00:00
"Peracom Networks, Inc.",
2000-01-20 07:39:19 +00:00
"Serial Converter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET,
0,
2000-04-03 15:15:50 +00:00
"Peracom Networks, Inc.",
2000-01-20 07:39:19 +00:00
"Ethernet adapter",
},
2000-03-29 19:46:41 +00:00
{
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET3,
0,
2000-04-03 15:15:50 +00:00
"Peracom Networks, Inc.",
2000-03-29 19:46:41 +00:00
"At Home Ethernet Adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET2,
0,
2000-04-03 15:15:50 +00:00
"Peracom Networks, Inc.",
2000-01-20 07:39:19 +00:00
"Ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_DSS350,
0,
2000-01-20 07:39:19 +00:00
"Philips",
"DSS 350 Digital Speaker System",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_DSS,
0,
2000-01-20 07:39:19 +00:00
"Philips",
"DSS XXX Digital Speaker System",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_HUB,
0,
2000-01-20 07:39:19 +00:00
"Philips",
"hub",
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_PCVC680K,
0,
"Philips",
"PCVC680K Vesta Pro PC Camera",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_DSS150,
0,
2000-01-20 07:39:19 +00:00
"Philips",
2000-04-03 15:15:50 +00:00
"DSS 150 Digital Speaker System",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PIENGINEERING, USB_PRODUCT_PIENGINEERING_PS2USB,
0,
2000-01-20 07:39:19 +00:00
"P.I. Engineering",
"PS2 to Mac USB Adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PLX, USB_PRODUCT_PLX_TESTBOARD,
0,
2000-01-20 07:39:19 +00:00
"PLX",
"test board",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_COMFORT,
0,
2000-01-20 07:39:19 +00:00
"Primax Electronics",
"Comfort",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_MOUSEINABOX,
0,
2000-01-20 07:39:19 +00:00
"Primax Electronics",
"Mouse-in-a-Box",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_PCGAUMS1,
0,
"Primax Electronics",
"Sony PCGA-UMS1",
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2301,
0,
"Prolific Technology Inc.",
"PL2301 Host-Host interface",
},
{
USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2302,
0,
"Prolific Technology Inc.",
"PL2302 Host-Host interface",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_QUICKSHOT, USB_PRODUCT_QUICKSHOT_STRIKEPAD,
0,
"Quickshot",
"USB StrikePad",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_ROCKFIRE, USB_PRODUCT_ROCKFIRE_GAMEPAD,
0,
2000-01-20 07:39:19 +00:00
"Rockfire",
"gamepad 203USB",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_QTRONIX, USB_PRODUCT_QTRONIX_980N,
0,
2000-01-20 07:39:19 +00:00
"Qtronix Corp",
"Scorpion-980N keyboard",
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SANDISK, USB_PRODUCT_SANDISK_IMAGEMATE,
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
0,
2000-01-20 07:39:19 +00:00
"SanDisk Corp",
"USB ImageMate",
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
},
2000-01-13 20:17:11 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SHUTTLE, USB_PRODUCT_SHUTTLE_EUSB,
2000-01-13 20:17:11 +00:00
0,
2000-01-20 07:39:19 +00:00
"Shuttle Technology",
"E-USB Bridge",
2000-01-13 20:17:11 +00:00
},
{
USB_VENDOR_SIIG, USB_PRODUCT_SIIG_DIGIFILMREADER,
0,
"SIIG",
"DigiFilm-Combo Reader",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SIRIUS, USB_PRODUCT_SIRIUS_ROADSTER,
0,
2000-01-20 07:39:19 +00:00
"Sirius Technologies",
"NetComm Roadster II 56 USB",
},
2000-04-14 14:44:54 +00:00
{
USB_VENDOR_SMARTBRIDGES, USB_PRODUCT_SMARTBRIDGES_SMARTLINK,
0,
"SmartBridges Pte Ltd.",
"SmartLink USB ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SMC, USB_PRODUCT_SMC_2102USB,
0,
2000-01-20 07:39:19 +00:00
"Standard Microsystems Corp",
"10Mbps ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SMC, USB_PRODUCT_SMC_2202USB,
0,
2000-01-20 07:39:19 +00:00
"Standard Microsystems Corp",
"10/100 ethernet adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SOLIDYEAR, USB_PRODUCT_SOLIDYEAR_KEYBOARD,
0,
2000-01-20 07:39:19 +00:00
"Solid Year",
"Solid Year USB keyboard",
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_STMICRO, USB_PRODUCT_STMICRO_COMMUNICATOR,
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
0,
2000-01-20 07:39:19 +00:00
"STMicroelectronics",
"USB Communicator",
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_SUN, USB_PRODUCT_SUN_KEYBOARD,
0,
2000-01-20 07:39:19 +00:00
"Sun Microsystems",
"Type 6 USB",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_TELEX, USB_PRODUCT_TELEX_MIC1,
0,
2000-04-03 15:15:50 +00:00
"Telex Communications, Inc.",
2000-01-20 07:39:19 +00:00
"Enhanced USB Microphone",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_TI, USB_PRODUCT_TI_UTUSB41,
0,
2000-01-20 07:39:19 +00:00
"Texas Instruments",
"UT-USB41 hub",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_THRUST, USB_PRODUCT_THRUST_FUSION_PAD,
0,
2000-01-20 07:39:19 +00:00
"Thrustmaster",
"Fusion Digital Gamepad",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_UNIACCESS, USB_PRODUCT_UNIACCESS_PANACHE,
0,
2000-01-20 07:39:19 +00:00
"Universal Access",
"Panache Surf USB ISDN Adapter",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_VISION, USB_PRODUCT_VISION_VC6452V002,
0,
2000-01-20 07:39:19 +00:00
"VLSI Vision Ltd.",
"VC6452V002 Camera",
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_WACOM, USB_PRODUCT_WACOM_CT0405U,
0,
2000-01-20 07:39:19 +00:00
"WACOM Corp. Ltd.",
"CT-0405-U Tablet",
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_WACOM, USB_PRODUCT_WACOM_GRAPHIRE,
0,
"WACOM Corp. Ltd.",
"Graphire",
},
{
USB_VENDOR_WACOM, USB_PRODUCT_WACOM_INTUOSA5,
0,
"WACOM Corp. Ltd.",
"Intuos A5",
},
2000-03-15 22:04:01 +00:00
{
USB_VENDOR_YEDATA, USB_PRODUCT_YEDATA_FLASHBUSTERU,
0,
"Y-E Data",
"Flashbuster-U",
},
2000-01-20 07:39:19 +00:00
{
USB_VENDOR_ZOOM, USB_PRODUCT_ZOOM_2986L,
0,
2000-04-03 15:15:50 +00:00
"Zoom Telephonics, Inc.",
2000-01-20 07:39:19 +00:00
"2986L Fax modem",
},
{
USB_VENDOR_AOX, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"AOX, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_ATMEL, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Atmel Corp.",
NULL,
},
{
USB_VENDOR_HP, 0,
USB_KNOWNDEV_NOPROD,
"Hewlett Packard",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ADAPTEC, 0,
USB_KNOWNDEV_NOPROD,
"Adaptec, Inc.",
NULL,
},
{
USB_VENDOR_ACERLABS, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Acer Labs, Inc.",
NULL,
},
{
2000-05-07 19:44:44 +00:00
USB_VENDOR_FTDI, 0,
2000-04-03 15:15:50 +00:00
USB_KNOWNDEV_NOPROD,
"Future Technology Devices",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_NEC, 0,
USB_KNOWNDEV_NOPROD,
"NEC",
NULL,
},
{
USB_VENDOR_KODAK, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Eastman Kodak Corp.",
NULL,
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_MELCO, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Melco, Inc.",
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ADI, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"ADI Systems, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_CATC, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Computer Access Technology Corp.",
NULL,
},
{
USB_VENDOR_GRAVIS, 0,
USB_KNOWNDEV_NOPROD,
"Advanced Gravis Computer Tech. Ltd.",
NULL,
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_SUN, 0,
USB_KNOWNDEV_NOPROD,
"Sun Microsystems",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AMD, 0,
USB_KNOWNDEV_NOPROD,
"Advanced Micro Devices",
NULL,
},
{
USB_VENDOR_LEXMARK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Lexmark International, Inc.",
NULL,
},
{
USB_VENDOR_NANAO, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"NANAO Corp.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ALPS, 0,
USB_KNOWNDEV_NOPROD,
"Alps Electric Co., Ltd.",
NULL,
},
{
USB_VENDOR_THRUST, 0,
USB_KNOWNDEV_NOPROD,
"Thrustmaster",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_TI, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Texas Instruments",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ANALOGDEVICES, 0,
USB_KNOWNDEV_NOPROD,
"Analog Devices, Inc.",
NULL,
},
{
USB_VENDOR_KYE, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"KYE Systems Corp.",
NULL,
},
{
USB_VENDOR_MICROSOFT, 0,
USB_KNOWNDEV_NOPROD,
"Microsoft",
NULL,
},
{
USB_VENDOR_PRIMAX, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Primax Electronics",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AMP, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"AMP, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_CHERRY, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Cherry Mikroschalter GmbH",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_MEGATRENDS, 0,
USB_KNOWNDEV_NOPROD,
"American Megatrends",
NULL,
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_LOGITECH, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Logitech, Inc.",
NULL,
},
{
USB_VENDOR_BTC, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Behavior Tech. Computer",
NULL,
},
{
USB_VENDOR_PHILIPS, 0,
USB_KNOWNDEV_NOPROD,
"Philips",
NULL,
},
{
USB_VENDOR_CONNECTIX, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Connectix Corp.",
NULL,
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_KENSINGTON, 0,
USB_KNOWNDEV_NOPROD,
"Kensington",
NULL,
},
{
USB_VENDOR_LUCENT, 0,
USB_KNOWNDEV_NOPROD,
"Lucent",
NULL,
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_STMICRO, 0,
USB_KNOWNDEV_NOPROD,
"STMicroelectronics",
NULL,
},
{
2000-03-20 18:30:34 +00:00
USB_VENDOR_ACERP, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Acer Peripherals, Inc.",
NULL,
},
{
USB_VENDOR_CANON, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Canon, Inc.",
NULL,
},
{
USB_VENDOR_CYPRESS, 0,
USB_KNOWNDEV_NOPROD,
"Cypress Semiconductor",
NULL,
},
{
USB_VENDOR_EPSON, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Seiko Epson Corp.",
NULL,
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_IODATA, 0,
USB_KNOWNDEV_NOPROD,
"I/O Data",
NULL,
},
{
USB_VENDOR_3COMUSR, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"U.S. Robotics",
NULL,
},
{
USB_VENDOR_KONICA, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Konica Corp.",
NULL,
},
{
USB_VENDOR_ALTEC, 0,
USB_KNOWNDEV_NOPROD,
2000-03-20 18:30:34 +00:00
"Altec Lansing Technologies, Inc.",
NULL,
},
{
USB_VENDOR_SHUTTLE, 0,
USB_KNOWNDEV_NOPROD,
"Shuttle Technology",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ANNABOOKS, 0,
USB_KNOWNDEV_NOPROD,
"Annabooks",
NULL,
},
{
USB_VENDOR_CHICONY, 0,
USB_KNOWNDEV_NOPROD,
"Chicony Electronics Co., Ltd.",
NULL,
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_BROTHER, 0,
USB_KNOWNDEV_NOPROD,
2000-03-20 19:49:50 +00:00
"Brother Industries, Ltd.",
1999-08-28 09:39:54 +00:00
NULL,
},
{
USB_VENDOR_DALLAS, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Dallas Semiconductor",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ACER, 0,
USB_KNOWNDEV_NOPROD,
"Acer, Inc.",
NULL,
},
{
USB_VENDOR_3COM, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"3Com Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_AZTECH, 0,
USB_KNOWNDEV_NOPROD,
"Aztech Systems Ltd",
NULL,
},
{
USB_VENDOR_BELKIN, 0,
USB_KNOWNDEV_NOPROD,
"Belkin Components",
NULL,
},
{
USB_VENDOR_KAWATSU, 0,
USB_KNOWNDEV_NOPROD,
"Kawatsu Semiconductor, Inc.",
NULL,
},
{
USB_VENDOR_APC, 0,
USB_KNOWNDEV_NOPROD,
"American Power Conversion",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_CONNECTEK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Advanced Connectek USA, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_NETCHIP, 0,
USB_KNOWNDEV_NOPROD,
"NetChip Technology",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ALTRA, 0,
USB_KNOWNDEV_NOPROD,
"ALTRA",
NULL,
},
{
USB_VENDOR_ATI, 0,
USB_KNOWNDEV_NOPROD,
"ATI Technologies, Inc.",
NULL,
},
1999-03-31 23:53:48 +00:00
{
USB_VENDOR_AKS, 0,
1999-03-31 23:53:48 +00:00
USB_KNOWNDEV_NOPROD,
2000-03-20 18:30:34 +00:00
"Aladdin Knowledge Systems",
1999-03-31 23:53:48 +00:00
NULL,
},
{
USB_VENDOR_UNIACCESS, 0,
USB_KNOWNDEV_NOPROD,
"Universal Access",
NULL,
},
{
USB_VENDOR_ANCHOR, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Anchor Chips, Inc.",
NULL,
},
{
USB_VENDOR_VISION, 0,
USB_KNOWNDEV_NOPROD,
"VLSI Vision Ltd.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ASAHIKASEI, 0,
USB_KNOWNDEV_NOPROD,
"Asahi Kasei Microsystems Co., Ltd",
NULL,
},
{
USB_VENDOR_ATEN, 0,
USB_KNOWNDEV_NOPROD,
2000-03-20 18:30:34 +00:00
"ATEN International Co. Ltd.",
NULL,
},
{
USB_VENDOR_MUSTEK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Mustek Systems, Inc.",
NULL,
},
{
USB_VENDOR_TELEX, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Telex Communications, Inc.",
NULL,
},
{
USB_VENDOR_PERACOM, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Peracom Networks, Inc.",
1999-08-28 09:39:54 +00:00
NULL,
},
{
USB_VENDOR_WACOM, 0,
USB_KNOWNDEV_NOPROD,
"WACOM Corp. Ltd.",
NULL,
},
{
USB_VENDOR_ETEK, 0,
USB_KNOWNDEV_NOPROD,
"e-TEK Labs",
NULL,
},
{
USB_VENDOR_EIZO, 0,
USB_KNOWNDEV_NOPROD,
"EIZO",
NULL,
},
{
USB_VENDOR_ELECOM, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Elecom Corp. Ltd.",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BAFO, 0,
USB_KNOWNDEV_NOPROD,
"BAFO/Quality Computer Accessories",
NULL,
},
2000-03-15 22:04:01 +00:00
{
USB_VENDOR_YEDATA, 0,
USB_KNOWNDEV_NOPROD,
"Y-E Data",
NULL,
},
2000-03-20 18:30:34 +00:00
{
2000-03-20 19:49:50 +00:00
USB_VENDOR_AVM, 0,
2000-03-20 18:30:34 +00:00
USB_KNOWNDEV_NOPROD,
"AVM GmbH",
NULL,
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_QUICKSHOT, 0,
USB_KNOWNDEV_NOPROD,
"Quickshot",
NULL,
},
{
USB_VENDOR_ROCKFIRE, 0,
USB_KNOWNDEV_NOPROD,
"Rockfire",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ALCOR, 0,
USB_KNOWNDEV_NOPROD,
"Alcor Micro, Inc.",
NULL,
},
{
USB_VENDOR_IOMEGA, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Iomega Corp.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ATREND, 0,
USB_KNOWNDEV_NOPROD,
"A-Trend Technology Co., Ltd.",
NULL,
},
{
USB_VENDOR_AID, 0,
USB_KNOWNDEV_NOPROD,
"Advanced Input Devices",
NULL,
},
1999-05-01 13:16:35 +00:00
{
USB_VENDOR_OMNIVISION, 0,
USB_KNOWNDEV_NOPROD,
"OmniVision",
NULL,
},
{
USB_VENDOR_INSYSTEM, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"In-System Design",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_APPLE, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Apple Computer",
NULL,
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_DIGI, 0,
USB_KNOWNDEV_NOPROD,
"Digi International",
NULL,
},
{
USB_VENDOR_QTRONIX, 0,
USB_KNOWNDEV_NOPROD,
"Qtronix Corp",
NULL,
},
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
{
USB_VENDOR_ELSA, 0,
USB_KNOWNDEV_NOPROD,
"ELSA Gmbh",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BRAINBOXES, 0,
USB_KNOWNDEV_NOPROD,
"Brainboxes Limited",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AXIOHM, 0,
USB_KNOWNDEV_NOPROD,
"Axiohm Transaction Solutions",
NULL,
},
{
USB_VENDOR_EIZONANAO, 0,
USB_KNOWNDEV_NOPROD,
"EIZO Nanao",
NULL,
},
{
USB_VENDOR_KLSI, 0,
USB_KNOWNDEV_NOPROD,
"Kawasaki LSI",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ANKO, 0,
USB_KNOWNDEV_NOPROD,
"Anko Electronic Co., Ltd.",
NULL,
},
{
USB_VENDOR_PIENGINEERING, 0,
USB_KNOWNDEV_NOPROD,
"P.I. Engineering",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AOC, 0,
USB_KNOWNDEV_NOPROD,
"AOC International",
NULL,
},
{
USB_VENDOR_CHIC, 0,
USB_KNOWNDEV_NOPROD,
"Chic Technology",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BARCO, 0,
USB_KNOWNDEV_NOPROD,
"Barco Display Systems",
NULL,
},
{
USB_VENDOR_BRIDGE, 0,
USB_KNOWNDEV_NOPROD,
"Bridge Information Co., Ltd.",
NULL,
},
2000-01-20 07:39:19 +00:00
{
USB_VENDOR_SOLIDYEAR, 0,
USB_KNOWNDEV_NOPROD,
"Solid Year",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BIORAD, 0,
USB_KNOWNDEV_NOPROD,
"Bio-Rad Laboratories",
NULL,
},
{
USB_VENDOR_MACALLY, 0,
USB_KNOWNDEV_NOPROD,
"Macally",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ACTLABS, 0,
USB_KNOWNDEV_NOPROD,
"Act Labs, Ltd.",
NULL,
},
{
USB_VENDOR_ALARIS, 0,
USB_KNOWNDEV_NOPROD,
"Alaris, Inc.",
NULL,
},
{
USB_VENDOR_APEX, 0,
USB_KNOWNDEV_NOPROD,
"Apex, Inc.",
NULL,
},
{
USB_VENDOR_AVISION, 0,
USB_KNOWNDEV_NOPROD,
"Avision, Inc.",
NULL,
},
{
USB_VENDOR_LINKSYS, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Linksys, Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ACERSA, 0,
USB_KNOWNDEV_NOPROD,
"Acer Semiconductor America, Inc.",
NULL,
},
{
USB_VENDOR_AIWA, 0,
USB_KNOWNDEV_NOPROD,
"Aiwa Co., Ltd.",
NULL,
},
{
USB_VENDOR_ACARD, 0,
USB_KNOWNDEV_NOPROD,
"ACARD Technology Corp.",
NULL,
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_PROLIFIC, 0,
USB_KNOWNDEV_NOPROD,
"Prolific Technology Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ADVANCELOGIC, 0,
USB_KNOWNDEV_NOPROD,
"Avance Logic, Inc.",
NULL,
},
{
USB_VENDOR_ASKEY, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Askey Computer Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_ALCATELT, 0,
USB_KNOWNDEV_NOPROD,
"Alcatel Telecom",
NULL,
},
{
USB_VENDOR_AGFA, 0,
USB_KNOWNDEV_NOPROD,
"AGFA-Gevaert NV",
NULL,
},
{
USB_VENDOR_ASIAMD, 0,
USB_KNOWNDEV_NOPROD,
"Asia Microelectronic Development, Inc.",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BIZLINK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Bizlink International Corp.",
2000-03-20 19:49:50 +00:00
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AASHIMA, 0,
USB_KNOWNDEV_NOPROD,
"Aashima Technology B.V.",
NULL,
},
1999-06-27 22:28:02 +00:00
{
USB_VENDOR_MULTITECH, 0,
USB_KNOWNDEV_NOPROD,
"MultiTech",
NULL,
},
{
USB_VENDOR_ADS, 0,
USB_KNOWNDEV_NOPROD,
2000-03-20 18:30:34 +00:00
"ADS Technologies, Inc.",
NULL,
},
{
USB_VENDOR_ALCATELM, 0,
USB_KNOWNDEV_NOPROD,
"Alcatel Microelectronics",
NULL,
},
2000-01-20 07:39:19 +00:00
{
USB_VENDOR_SIRIUS, 0,
USB_KNOWNDEV_NOPROD,
"Sirius Technologies",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BOSTON, 0,
USB_KNOWNDEV_NOPROD,
"Boston Acoustics",
NULL,
},
{
USB_VENDOR_SMC, 0,
USB_KNOWNDEV_NOPROD,
"Standard Microsystems Corp",
NULL,
},
2000-05-07 19:44:44 +00:00
{
USB_VENDOR_MCT, 0,
USB_KNOWNDEV_NOPROD,
"MCT Corp.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AUREAL, 0,
USB_KNOWNDEV_NOPROD,
"Aureal Semiconductor",
NULL,
},
{
USB_VENDOR_MIDIMAN, 0,
USB_KNOWNDEV_NOPROD,
"Midiman",
NULL,
},
{
USB_VENDOR_SANDISK, 0,
USB_KNOWNDEV_NOPROD,
"SanDisk Corp",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BRIMAX, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Brimax, Inc.",
2000-03-20 19:49:50 +00:00
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AXIS, 0,
USB_KNOWNDEV_NOPROD,
"Axis Communications AB",
NULL,
},
{
USB_VENDOR_ABL, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"ABL Electronics Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_ALFADATA, 0,
USB_KNOWNDEV_NOPROD,
"Alfadata Computer Corp.",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BE, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Be, Inc.",
2000-03-20 19:49:50 +00:00
NULL,
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_ADMTEK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"ADMtek, Inc.",
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
NULL,
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_COREGA, 0,
USB_KNOWNDEV_NOPROD,
"Corega",
NULL,
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_FREECOM, 0,
USB_KNOWNDEV_NOPROD,
"Freecom",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ABOCOM, 0,
USB_KNOWNDEV_NOPROD,
"AboCom Systems, Inc.",
NULL,
},
2000-03-29 15:08:02 +00:00
{
USB_VENDOR_KEISOKUGIKEN, 0,
USB_KNOWNDEV_NOPROD,
"Keisokugiken Corp.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_APG, 0,
USB_KNOWNDEV_NOPROD,
"APG Cash Drawer",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BUG, 0,
USB_KNOWNDEV_NOPROD,
"B.U.G., Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ALLIEDTELESYN, 0,
USB_KNOWNDEV_NOPROD,
"Allied Telesyn International",
NULL,
},
{
USB_VENDOR_AVERMEDIA, 0,
USB_KNOWNDEV_NOPROD,
"AVerMedia Technologies, Inc.",
NULL,
},
{
USB_VENDOR_SIIG, 0,
USB_KNOWNDEV_NOPROD,
"SIIG",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_APTIO, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Aptio Products, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_ARASAN, 0,
USB_KNOWNDEV_NOPROD,
"Arasan Chip Systems",
NULL,
},
{
USB_VENDOR_ALLIEDCABLE, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Allied Cable Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
2000-01-20 07:39:19 +00:00
{
USB_VENDOR_ZOOM, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Zoom Telephonics, Inc.",
2000-01-20 07:39:19 +00:00
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BROADLOGIC, 0,
USB_KNOWNDEV_NOPROD,
"BroadLogic, Inc.",
NULL,
},
{
USB_VENDOR_HANDSPRING, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Handspring, Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ACTIONSTAR, 0,
USB_KNOWNDEV_NOPROD,
"Action Star Enterprise Co., Ltd.",
NULL,
},
2000-04-03 15:15:50 +00:00
{
USB_VENDOR_PALM, 0,
USB_KNOWNDEV_NOPROD,
"Palm Computing, Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ACCTON, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Accton Technology Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
2000-01-20 07:39:19 +00:00
USB_VENDOR_DIAMOND, 0,
USB_KNOWNDEV_NOPROD,
2000-01-20 07:39:19 +00:00
"Diamond",
NULL,
},
{
USB_VENDOR_NETGEAR, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"BayNETGEAR, Inc.",
NULL,
},
2000-01-20 07:39:19 +00:00
{
USB_VENDOR_ACTIVEWIRE, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"ActiveWire, Inc.",
2000-01-20 07:39:19 +00:00
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ADESSOKBTEK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"ADESSO/Kbtek America, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_APT, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"APT Technologies, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BOCARESEARCH, 0,
USB_KNOWNDEV_NOPROD,
"Boca Research, Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ANDREA, 0,
USB_KNOWNDEV_NOPROD,
"Andrea Electronics",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BURRBROWN, 0,
USB_KNOWNDEV_NOPROD,
"Burr-Brown Japan, Ltd.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_2WIRE, 0,
USB_KNOWNDEV_NOPROD,
"2Wire, Inc",
NULL,
},
{
USB_VENDOR_AIPTEK, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"AIPTEK International, Inc.",
2000-03-20 18:30:34 +00:00
NULL,
},
2000-04-14 14:44:54 +00:00
{
USB_VENDOR_SMARTBRIDGES, 0,
USB_KNOWNDEV_NOPROD,
"SmartBridges Pte Ltd.",
NULL,
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_BILLIONTON, 0,
USB_KNOWNDEV_NOPROD,
2000-03-20 19:49:50 +00:00
"Billionton Systems, Inc.",
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AUTHENTEC, 0,
USB_KNOWNDEV_NOPROD,
"AuthenTec, Inc.",
NULL,
},
{
USB_VENDOR_ALATION, 0,
USB_KNOWNDEV_NOPROD,
"Alation Systems, Inc.",
NULL,
},
{
USB_VENDOR_BIOMETRIC, 0,
USB_KNOWNDEV_NOPROD,
"American Biometric Company",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BLUEWATER, 0,
USB_KNOWNDEV_NOPROD,
"BlueWater Systems, Inc.",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_AGILENT, 0,
USB_KNOWNDEV_NOPROD,
"Agilent Technologies, Inc.",
NULL,
},
{
USB_VENDOR_ADIRONDACK, 0,
USB_KNOWNDEV_NOPROD,
"Adirondack Wire & Cable",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BECKHOFF, 0,
USB_KNOWNDEV_NOPROD,
"Beckhoff Gmbh",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ALTIUS, 0,
USB_KNOWNDEV_NOPROD,
"Altius Solutions, Inc.",
NULL,
},
{
USB_VENDOR_ARRIS, 0,
USB_KNOWNDEV_NOPROD,
"Arris Interactive LLC",
NULL,
},
{
USB_VENDOR_ACTIVCARD, 0,
USB_KNOWNDEV_NOPROD,
"ACTIVCARD, INC.",
NULL,
},
{
USB_VENDOR_ACTISYS, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"ACTiSYS Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_AFOURTECH, 0,
USB_KNOWNDEV_NOPROD,
"A-FOUR TECH CO., LTD.",
NULL,
},
{
USB_VENDOR_AIMEX, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"AIMEX Corp.",
2000-03-20 18:30:34 +00:00
NULL,
},
{
USB_VENDOR_ADDONICS, 0,
USB_KNOWNDEV_NOPROD,
"Addonics Technologies Corp.",
NULL,
},
{
USB_VENDOR_AKAI, 0,
USB_KNOWNDEV_NOPROD,
"AKAI professional M.I. Corp.",
NULL,
},
{
USB_VENDOR_ARESCOM, 0,
USB_KNOWNDEV_NOPROD,
"ARESCOM",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BAY, 0,
USB_KNOWNDEV_NOPROD,
"Bay Associates",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ALTERA, 0,
USB_KNOWNDEV_NOPROD,
"Altera",
NULL,
},
{
USB_VENDOR_ASAHIOPTICAL, 0,
USB_KNOWNDEV_NOPROD,
"Asahi Optical Co., Ltd.",
NULL,
},
2000-03-20 19:49:50 +00:00
{
USB_VENDOR_BOCASYSTEMS, 0,
USB_KNOWNDEV_NOPROD,
2000-04-03 15:15:50 +00:00
"Boca Systems, Inc.",
2000-03-20 19:49:50 +00:00
NULL,
},
{
USB_VENDOR_BROADCOM, 0,
USB_KNOWNDEV_NOPROD,
"Broadcom Corp.",
NULL,
},
{
USB_VENDOR_MOTOROLA, 0,
USB_KNOWNDEV_NOPROD,
"Motorola",
NULL,
},
{
USB_VENDOR_PLX, 0,
USB_KNOWNDEV_NOPROD,
"PLX",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_INSIDEOUT, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Inside Out Networks",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_ENTREGA, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Entrega",
NULL,
},
2000-03-20 18:30:34 +00:00
{
USB_VENDOR_ACTIONTEC, 0,
USB_KNOWNDEV_NOPROD,
"Actiontec Electronics, Inc.",
NULL,
},
{
USB_VENDOR_DLINK, 0,
USB_KNOWNDEV_NOPROD,
"D-Link Corp",
NULL,
},
{
USB_VENDOR_INTEL, 0,
USB_KNOWNDEV_NOPROD,
"Intel",
NULL,
},
{ 0, 0, 0, NULL, NULL, }
};