freebsd-dev/etc/rc.firewall

215 lines
5.8 KiB
Plaintext
Raw Normal View History

############
# Setup system for firewall service.
1999-08-27 23:37:10 +00:00
# $FreeBSD$
1998-02-10 01:45:57 +00:00
# Suck in the configuration variables.
if [ -r /etc/defaults/rc.conf ]; then
. /etc/defaults/rc.conf
elif [ -r /etc/rc.conf ]; then
1998-02-10 01:45:57 +00:00
. /etc/rc.conf
fi
############
# Define the firewall type in /etc/rc.conf. Valid values are:
# open - will allow anyone in
# client - will try to protect just this machine
# simple - will try to protect a whole network
# closed - totally disables IP services except via lo0 interface
# UNKNOWN - disables the loading of firewall rules.
# filename - will load the rules in the given filename (full path required)
#
# For ``client'' and ``simple'' the entries below should be customized
# appropriately.
############
#
# If you don't know enough about packet filtering, we suggest that you
# take time to read this book:
#
# Building Internet Firewalls
# Brent Chapman and Elizabeth Zwicky
#
# O'Reilly & Associates, Inc
# ISBN 1-56592-124-0
# http://www.ora.com/
#
# For a more advanced treatment of Internet Security read:
#
# Firewalls & Internet Security
# Repelling the wily hacker
# William R. Cheswick, Steven M. Bellowin
#
# Addison-Wesley
# ISBN 0-201-6337-4
# http://www.awl.com/
#
if [ -n "${1}" ]; then
firewall_type="${1}"
fi
############
# Set quiet mode if requested
#
case ${firewall_quiet} in
[Yy][Ee][Ss])
fwcmd="/sbin/ipfw -q"
;;
*)
fwcmd="/sbin/ipfw"
;;
esac
############
# Flush out the list before we begin.
#
${fwcmd} -f flush
############
# These rules are required for using natd. All packets are passed to
# natd before they encounter your remaining rules. The firewall rules
# will then be run again on each packet after translation by natd,
# minus any divert rules (see natd(8)).
#
case ${natd_enable} in
[Yy][Ee][Ss])
if [ -n "${natd_interface}" ]; then
${fwcmd} add divert natd all from any to any via ${natd_interface}
fi
;;
esac
############
# If you just configured ipfw in the kernel as a tool to solve network
# problems or you just want to disallow some particular kinds of traffic
1999-09-30 04:55:23 +00:00
# then you will want to change the default policy to open. You can also
# do this as your only action by setting the firewall_type to ``open''.
#
# ${fwcmd} add 65000 pass all from any to any
############
# Only in rare cases do you want to change these rules
#
${fwcmd} add 100 pass all from any to any via lo0
${fwcmd} add 200 deny all from any to 127.0.0.0/8
# Prototype setups.
#
case ${firewall_type} in
[Oo][Pp][Ee][Nn])
${fwcmd} add 65000 pass all from any to any
;;
[Cc][Ll][Ii][Ee][Nn][Tt])
############
# This is a prototype setup that will protect your system somewhat
# against people from outside your own network.
############
# set these to your network and netmask and ip
net="192.168.4.0"
mask="255.255.255.0"
ip="192.168.4.17"
# Allow any traffic to or from my own net.
${fwcmd} add pass all from ${ip} to ${net}:${mask}
${fwcmd} add pass all from ${net}:${mask} to ${ip}
# Allow TCP through if setup succeeded
${fwcmd} add pass tcp from any to any established
# Allow setup of incoming email
${fwcmd} add pass tcp from any to ${ip} 25 setup
# Allow setup of outgoing TCP connections only
${fwcmd} add pass tcp from ${ip} to any setup
# Disallow setup of all other TCP connections
${fwcmd} add deny tcp from any to any setup
# Allow DNS queries out in the world
${fwcmd} add pass udp from any 53 to ${ip}
${fwcmd} add pass udp from ${ip} to any 53
# Allow NTP queries out in the world
${fwcmd} add pass udp from any 123 to ${ip}
${fwcmd} add pass udp from ${ip} to any 123
# Everything else is denied by default, unless the
# IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel
# config file.
;;
[Ss][Ii][Mm][Pp][Ll][Ee])
############
# This is a prototype setup for a simple firewall. Configure this
# machine as a named server and ntp server, and point all the machines
# on the inside at this machine for those services.
############
# set these to your outside interface network and netmask and ip
oif="ed0"
onet="192.168.4.0"
omask="255.255.255.0"
oip="192.168.4.17"
# set these to your inside interface network and netmask and ip
iif="ed1"
inet="192.168.3.0"
imask="255.255.255.0"
iip="192.168.3.17"
# Stop spoofing
${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif}
${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif}
# Stop RFC1918 nets on the outside interface
${fwcmd} add deny all from 192.168.0.0:255.255.0.0 to any via ${oif}
${fwcmd} add deny all from any to 192.168.0.0:255.255.0.0 via ${oif}
${fwcmd} add deny all from 172.16.0.0:255.240.0.0 to any via ${oif}
${fwcmd} add deny all from any to 172.16.0.0:255.240.0.0 via ${oif}
${fwcmd} add deny all from 10.0.0.0:255.0.0.0 to any via ${oif}
${fwcmd} add deny all from any to 10.0.0.0:255.0.0.0 via ${oif}
# Allow TCP through if setup succeeded
${fwcmd} add pass tcp from any to any established
# Allow setup of incoming email
${fwcmd} add pass tcp from any to ${oip} 25 setup
# Allow access to our DNS
${fwcmd} add pass tcp from any to ${oip} 53 setup
# Allow access to our WWW
${fwcmd} add pass tcp from any to ${oip} 80 setup
# Reject&Log all setup of incoming connections from the outside
${fwcmd} add deny log tcp from any to any in via ${oif} setup
# Allow setup of any other TCP connection
${fwcmd} add pass tcp from any to any setup
# Allow DNS queries out in the world
${fwcmd} add pass udp from any 53 to ${oip}
${fwcmd} add pass udp from ${oip} to any 53
# Allow NTP queries out in the world
${fwcmd} add pass udp from any 123 to ${oip}
${fwcmd} add pass udp from ${oip} to any 123
# Everything else is denied by default, unless the
# IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel
# config file.
;;
[Uu][Nn][Kk][Nn][Oo][Ww][Nn])
;;
*)
if [ -r "${firewall_type}" ]; then
${fwcmd} ${firewall_type}
fi
;;
esac