freebsd-dev/sbin/fsck_ffs/setup.c

446 lines
12 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char sccsid[] = "@(#)setup.c 8.10 (Berkeley) 5/9/95";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/disk.h>
#include <sys/stat.h>
#define FSTYPENAMES
#include <sys/disklabel.h>
#include <sys/file.h>
#include <sys/sysctl.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <limits.h>
#include <stdint.h>
#include <string.h>
#include <libufs.h>
#include "fsck.h"
Rewrite the disk I/O management system in fsck_ffs(8). Other than making fsck_ffs(8) run faster, there should be no functional change. The original fsck_ffs(8) had its own disk I/O management system. When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8) to do the necessary gjournal rollback. Rather than use the existing fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly when journalled soft updates were added in FreeBSD 9, code was added to fsck_ffs(8) to do the necessary journal rollback. And once again, rather than using either of the existing fsck_ffs(8) disk I/O systems, it wrote its own from scratch. Lastly the fsdb(8) utility uses the fsck_ffs(8) disk I/O management system. In preparation for making the changes necessary to enable snapshots to be taken when using journalled soft updates, it was necessary to have a single disk I/O system used by all the various subsystems in fsck_ffs(8). This commit merges the functionality required by all the different subsystems into a single disk I/O system that supports all of their needs. In so doing it picks up optimizations from each of them with the results that each of the subsystems does fewer reads and writes than it did with its own customized I/O system. It also greatly simplifies making changes to fsck_ffs(8) since everything goes through a single place. For example the ginode() function fetches an inode from the disk. When inode check hashes were added, they previously had to be checked in the code implementing inode fetch in each of the three different disk I/O systems. Now they need only be checked in ginode(). Tested by: Peter Holm Sponsored by: Netflix
2021-01-07 01:37:08 +00:00
struct inoinfo **inphead, **inpsort; /* info about all inodes */
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
static int sbhashfailed;
#define POWEROF2(num) (((num) & ((num) - 1)) == 0)
static int calcsb(char *dev, int devfd, struct fs *fs);
static void saverecovery(int readfd, int writefd);
static int chkrecovery(int devfd);
/*
* Read in a superblock finding an alternate if necessary.
* Return 1 if successful, 0 if unsuccessful, -1 if file system
* is already clean (ckclean and preen mode only).
*/
int
setup(char *dev)
{
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
long bmapsize;
/*
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
* We are expected to have an open file descriptor and a superblock.
*/
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
if (fsreadfd < 0 || havesb == 0) {
if (debug)
printf("setup: bad fsreadfd or missing superblock\n");
return (0);
}
if (preen == 0)
printf("** %s", dev);
if (bkgrdflag == 0 &&
(nflag || (fswritefd = open(dev, O_WRONLY)) < 0)) {
fswritefd = -1;
if (preen)
pfatal("NO WRITE ACCESS");
printf(" (NO WRITE)");
}
if (preen == 0)
printf("\n");
if (sbhashfailed != 0) {
pwarn("SUPERBLOCK CHECK HASH FAILED");
if (fswritefd == -1)
pwarn("OPENED READONLY SO CANNOT CORRECT CHECK HASH\n");
else if (preen || reply("CORRECT CHECK HASH") != 0) {
if (preen)
printf(" (CORRECTED)\n");
sblock.fs_clean = 0;
sbdirty();
}
}
if (skipclean && ckclean && sblock.fs_clean) {
2003-08-01 11:31:19 +00:00
pwarn("FILE SYSTEM CLEAN; SKIPPING CHECKS\n");
return (-1);
}
maxfsblock = sblock.fs_size;
maxino = sblock.fs_ncg * sblock.fs_ipg;
/*
* Check and potentially fix certain fields in the super block.
*/
if (sblock.fs_optim != FS_OPTTIME && sblock.fs_optim != FS_OPTSPACE) {
pfatal("UNDEFINED OPTIMIZATION IN SUPERBLOCK");
if (reply("SET TO DEFAULT") == 1) {
sblock.fs_optim = FS_OPTTIME;
sbdirty();
}
}
if ((sblock.fs_minfree < 0 || sblock.fs_minfree > 99)) {
pfatal("IMPOSSIBLE MINFREE=%d IN SUPERBLOCK",
sblock.fs_minfree);
if (reply("SET TO DEFAULT") == 1) {
sblock.fs_minfree = 10;
sbdirty();
}
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sblock.fs_magic == FS_UFS1_MAGIC &&
sblock.fs_old_inodefmt < FS_44INODEFMT) {
pwarn("Format of file system is too old.\n");
pwarn("Must update to modern format using a version of fsck\n");
pfatal("from before 2002 with the command ``fsck -c 2''\n");
exit(EEXIT);
}
if (preen == 0 && yflag == 0 && sblock.fs_magic == FS_UFS2_MAGIC &&
fswritefd != -1 && chkrecovery(fsreadfd) == 0 &&
reply("SAVE DATA TO FIND ALTERNATE SUPERBLOCKS") != 0)
saverecovery(fsreadfd, fswritefd);
/*
* allocate and initialize the necessary maps
*/
bufinit();
bmapsize = roundup(howmany(maxfsblock, CHAR_BIT), sizeof(short));
blockmap = Calloc((unsigned)bmapsize, sizeof (char));
if (blockmap == NULL) {
printf("cannot alloc %u bytes for blockmap\n",
(unsigned)bmapsize);
goto badsb;
}
inostathead = Calloc(sblock.fs_ncg, sizeof(struct inostatlist));
if (inostathead == NULL) {
printf("cannot alloc %u bytes for inostathead\n",
(unsigned)(sizeof(struct inostatlist) * (sblock.fs_ncg)));
goto badsb;
}
numdirs = MAX(sblock.fs_cstotal.cs_ndir, 128);
dirhash = numdirs;
inplast = 0;
listmax = numdirs + 10;
inpsort = (struct inoinfo **)Calloc(listmax, sizeof(struct inoinfo *));
inphead = (struct inoinfo **)Calloc(numdirs, sizeof(struct inoinfo *));
if (inpsort == NULL || inphead == NULL) {
printf("cannot alloc %ju bytes for inphead\n",
(uintmax_t)numdirs * sizeof(struct inoinfo *));
goto badsb;
}
if (sblock.fs_flags & FS_DOSOFTDEP)
usedsoftdep = 1;
else
usedsoftdep = 0;
return (1);
badsb:
ckfini(0);
return (0);
}
/*
* Open a device or file to be checked by fsck.
*/
int
openfilesys(char *dev)
{
struct stat statb;
int saved_fsreadfd;
if (stat(dev, &statb) < 0)
return (0);
if ((statb.st_mode & S_IFMT) != S_IFCHR &&
(statb.st_mode & S_IFMT) != S_IFBLK) {
if (bkgrdflag != 0 && (statb.st_flags & SF_SNAPSHOT) == 0) {
pfatal("BACKGROUND FSCK LACKS A SNAPSHOT\n");
exit(EEXIT);
}
if (bkgrdflag != 0) {
cursnapshot = statb.st_ino;
} else {
pfatal("%s IS NOT A DISK DEVICE\n", dev);
if (reply("CONTINUE") == 0)
return (0);
}
}
saved_fsreadfd = fsreadfd;
if ((fsreadfd = open(dev, O_RDONLY)) < 0) {
fsreadfd = saved_fsreadfd;
return (0);
}
if (saved_fsreadfd != -1)
close(saved_fsreadfd);
return (1);
}
/*
* Read in the super block and its summary info.
*/
int
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
readsb(void)
{
struct fs *fs;
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
sbhashfailed = 0;
readcnt[sblk.b_type]++;
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
/*
* If bflag is given, then check just that superblock.
*/
if (bflag) {
switch (sbget(fsreadfd, &fs, bflag * dev_bsize, 0)) {
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
case 0:
goto goodsb;
case EINTEGRITY:
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
printf("Check hash failed for superblock at %jd\n",
bflag);
return (0);
case ENOENT:
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
printf("%jd is not a file system superblock\n", bflag);
return (0);
case EIO:
default:
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
printf("I/O error reading %jd\n", bflag);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (0);
}
}
Move the ability to search for alternate UFS superblocks from fsck_ffs(8) into ffs_sbsearch() to allow use by other parts of the system. Historically only fsck_ffs(8), the UFS filesystem checker, had code to track down and use alternate UFS superblocks. Since fsdb(8) used much of the fsck_ffs(8) implementation it had some ability to track down alternate superblocks. This change extracts the code to track down alternate superblocks from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found in ffs_subr.c, these functions can be used directly by the kernel subsystems. Additionally they are exported to the UFS library, libufs(8) so that they can be used by user-level programs. The new functions added to libufs(8) are sbfind(3) that is an alternative to sbread(3) and sbsearch(3) that is an alternative to sbget(3). See their manual pages for further details. The utilities that have been changed to search for superblocks are dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8) tool found in tools/diag/prtblknos searches for superblocks. The UFS specific mount code uses the superblock search interface when mounting the root filesystem and when the administrator doing a mount(8) command specifies the force flag (-f). The standalone UFS boot code (found in stand/libsa/ufs.c) uses the superblock search code in the hope of being able to get the system up and running so that fsck_ffs(8) can be used to get the filesystem cleaned up. The following utilities have not been changed to search for superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8), dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and glabel(8). When these utilities fail, they do report the cause of the failure. The one exception is the tasting code used to try and figure what a given disk contains. The tasting code will remain silent so as not to put out a slew of messages as it trying to taste every new mass storage device that shows up. Reviewed by: kib Reviewed by: Warner Losh Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D36053 Sponsored by: The FreeBSD Foundation
2022-08-13 19:41:53 +00:00
/*
* Check for the standard superblock and use it if good.
*/
if (sbget(fsreadfd, &fs, UFS_STDSB, UFS_NOMSG) == 0)
goto goodsb;
/*
* Check if the only problem is a check-hash failure.
*/
skipclean = 0;
if (sbget(fsreadfd, &fs, UFS_STDSB, UFS_NOMSG | UFS_NOHASHFAIL) == 0) {
sbhashfailed = 1;
goto goodsb;
}
/*
* Do an exhaustive search for a usable superblock.
*/
switch (sbsearch(fsreadfd, &fs, 0)) {
case 0:
goto goodsb;
case ENOENT:
printf("SEARCH FOR ALTERNATE SUPER-BLOCK FAILED. "
"YOU MUST USE THE\n-b OPTION TO FSCK TO SPECIFY "
"THE LOCATION OF AN ALTERNATE\nSUPER-BLOCK TO "
"SUPPLY NEEDED INFORMATION; SEE fsck_ffs(8).\n");
return (0);
case EIO:
default:
printf("I/O error reading a usable superblock\n");
return (0);
}
goodsb:
memcpy(&sblock, fs, fs->fs_sbsize);
free(fs);
/*
* Compute block size that the file system is based on,
* according to fsbtodb, and adjust superblock block number
* so we can tell if this is an alternate later.
*/
dev_bsize = sblock.fs_fsize / fsbtodb(&sblock, 1);
sblk.b_bno = sblock.fs_sblockactualloc / dev_bsize;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
sblk.b_size = SBLOCKSIZE;
/*
* If not yet done, update UFS1 superblock with new wider fields.
*/
if (sblock.fs_magic == FS_UFS1_MAGIC &&
sblock.fs_maxbsize != sblock.fs_bsize) {
sblock.fs_maxbsize = sblock.fs_bsize;
sblock.fs_time = sblock.fs_old_time;
sblock.fs_size = sblock.fs_old_size;
sblock.fs_dsize = sblock.fs_old_dsize;
sblock.fs_csaddr = sblock.fs_old_csaddr;
sblock.fs_cstotal.cs_ndir = sblock.fs_old_cstotal.cs_ndir;
sblock.fs_cstotal.cs_nbfree = sblock.fs_old_cstotal.cs_nbfree;
sblock.fs_cstotal.cs_nifree = sblock.fs_old_cstotal.cs_nifree;
sblock.fs_cstotal.cs_nffree = sblock.fs_old_cstotal.cs_nffree;
}
havesb = 1;
return (1);
}
void
sblock_init(void)
{
fsreadfd = -1;
fswritefd = -1;
fsmodified = 0;
lfdir = 0;
initbarea(&sblk, BT_SUPERBLK);
sblk.b_un.b_buf = Malloc(SBLOCKSIZE);
if (sblk.b_un.b_buf == NULL)
errx(EEXIT, "cannot allocate space for superblock");
dev_bsize = secsize = DEV_BSIZE;
}
/*
* Calculate a prototype superblock based on information in the boot area.
* When done the cgsblock macro can be calculated and the fs_ncg field
* can be used. Do NOT attempt to use other macros without verifying that
* their needed information is available!
*/
static int
calcsb(char *dev, int devfd, struct fs *fs)
{
struct fsrecovery *fsr;
char *fsrbuf;
u_int secsize;
/*
* We need fragments-per-group and the partition-size.
*
* Newfs stores these details at the end of the boot block area
* at the start of the filesystem partition. If they have been
* overwritten by a boot block, we fail. But usually they are
* there and we can use them.
*/
if (ioctl(devfd, DIOCGSECTORSIZE, &secsize) == -1)
return (0);
fsrbuf = Malloc(secsize);
if (fsrbuf == NULL)
errx(EEXIT, "calcsb: cannot allocate recovery buffer");
if (blread(devfd, fsrbuf,
(SBLOCK_UFS2 - secsize) / dev_bsize, secsize) != 0) {
free(fsrbuf);
return (0);
}
fsr = (struct fsrecovery *)&fsrbuf[secsize - sizeof *fsr];
if (fsr->fsr_magic != FS_UFS2_MAGIC) {
free(fsrbuf);
return (0);
}
memset(fs, 0, sizeof(struct fs));
fs->fs_fpg = fsr->fsr_fpg;
fs->fs_fsbtodb = fsr->fsr_fsbtodb;
fs->fs_sblkno = fsr->fsr_sblkno;
fs->fs_magic = fsr->fsr_magic;
fs->fs_ncg = fsr->fsr_ncg;
free(fsrbuf);
return (1);
}
/*
* Check to see if recovery information exists.
* Return 1 if it exists or cannot be created.
* Return 0 if it does not exist and can be created.
*/
static int
chkrecovery(int devfd)
{
struct fsrecovery *fsr;
char *fsrbuf;
u_int secsize, rdsize;
/*
* Could not determine if backup material exists, so do not
* offer to create it.
*/
fsrbuf = NULL;
rdsize = sblock.fs_fsize;
if (ioctl(devfd, DIOCGSECTORSIZE, &secsize) == -1 ||
rdsize % secsize != 0 ||
(fsrbuf = Malloc(rdsize)) == NULL ||
blread(devfd, fsrbuf, (SBLOCK_UFS2 - rdsize) / dev_bsize,
rdsize) != 0) {
free(fsrbuf);
return (1);
}
/*
* Recovery material has already been created, so do not
* need to create it again.
*/
fsr = (struct fsrecovery *)&fsrbuf[rdsize - sizeof *fsr];
if (fsr->fsr_magic == FS_UFS2_MAGIC) {
free(fsrbuf);
return (1);
}
/*
* Recovery material has not been created and can be if desired.
*/
free(fsrbuf);
return (0);
}
/*
* Read the last filesystem-size piece of the boot block, replace the
* last 20 bytes with the recovery information, then write it back.
* The recovery information only works for UFS2 filesystems.
*/
static void
saverecovery(int readfd, int writefd)
{
struct fsrecovery *fsr;
char *fsrbuf;
u_int secsize, rdsize;
fsrbuf = NULL;
rdsize = sblock.fs_fsize;
if (sblock.fs_magic != FS_UFS2_MAGIC ||
ioctl(readfd, DIOCGSECTORSIZE, &secsize) == -1 ||
rdsize % secsize != 0 ||
(fsrbuf = Malloc(rdsize)) == NULL ||
blread(readfd, fsrbuf, (SBLOCK_UFS2 - rdsize) / dev_bsize,
rdsize) != 0) {
printf("RECOVERY DATA COULD NOT BE CREATED\n");
free(fsrbuf);
return;
}
fsr = (struct fsrecovery *)&fsrbuf[rdsize - sizeof *fsr];
fsr->fsr_magic = sblock.fs_magic;
fsr->fsr_fpg = sblock.fs_fpg;
fsr->fsr_fsbtodb = sblock.fs_fsbtodb;
fsr->fsr_sblkno = sblock.fs_sblkno;
fsr->fsr_ncg = sblock.fs_ncg;
blwrite(writefd, fsrbuf, (SBLOCK_UFS2 - rdsize) / dev_bsize, rdsize);
free(fsrbuf);
}