freebsd-dev/sys/boot/i386/boot2/boot2.c

655 lines
14 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1998 Robert Nordier
* All rights reserved.
*
* Redistribution and use in source and binary forms are freely
* permitted provided that the above copyright notice and this
* paragraph and the following disclaimer are duplicated in all
* such forms.
*
* This software is provided "AS IS" and without any express or
* implied warranties, including, without limitation, the implied
* warranties of merchantability and fitness for a particular
* purpose.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/disklabel.h>
#include <sys/diskmbr.h>
#include <sys/dirent.h>
#include <sys/reboot.h>
#include <machine/bootinfo.h>
#include <machine/elf.h>
#include <stdarg.h>
#include <a.out.h>
#include <btxv86.h>
#include "boot2.h"
#include "lib.h"
#define IO_KEYBOARD 1
#define IO_SERIAL 2
#define SECOND 18 /* Circa that many ticks in a second. */
#define RBX_ASKNAME 0x0 /* -a */
#define RBX_SINGLE 0x1 /* -s */
/* 0x2 is reserved for log2(RB_NOSYNC). */
/* 0x3 is reserved for log2(RB_HALT). */
/* 0x4 is reserved for log2(RB_INITNAME). */
#define RBX_DFLTROOT 0x5 /* -r */
#define RBX_KDB 0x6 /* -d */
/* 0x7 is reserved for log2(RB_RDONLY). */
/* 0x8 is reserved for log2(RB_DUMP). */
/* 0x9 is reserved for log2(RB_MINIROOT). */
#define RBX_CONFIG 0xa /* -c */
#define RBX_VERBOSE 0xb /* -v */
#define RBX_SERIAL 0xc /* -h */
#define RBX_CDROM 0xd /* -C */
/* 0xe is reserved for log2(RB_POWEROFF). */
#define RBX_GDB 0xf /* -g */
#define RBX_MUTE 0x10 /* -m */
/* 0x11 is reserved for log2(RB_SELFTEST). */
/* 0x12 is reserved for boot programs. */
/* 0x13 is reserved for boot programs. */
#define RBX_PAUSE 0x14 /* -p */
#define RBX_NOINTR 0x1c /* -n */
/* 0x1d is reserved for log2(RB_MULTIPLE) and is just misnamed here. */
#define RBX_DUAL 0x1d /* -D */
#define RBX_PROBEKBD 0x1e /* -P */
/* 0x1f is reserved for log2(RB_BOOTINFO). */
/* pass: -a, -s, -r, -d, -c, -v, -h, -C, -g, -m, -p, -D */
#define RBX_MASK 0x2005ffff
#define PATH_CONFIG "/boot.config"
#define PATH_BOOT3 "/boot/loader"
#define PATH_KERNEL "/kernel"
#define ARGS 0x900
#define NOPT 12
#define NDEV 3
#define MEM_BASE 0x12
#define MEM_EXT 0x15
#define V86_CY(x) ((x) & 1)
#define V86_ZR(x) ((x) & 0x40)
#define DRV_HARD 0x80
#define DRV_MASK 0x7f
#define TYPE_AD 0
#define TYPE_DA 1
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
#define TYPE_MAXHARD TYPE_DA
#define TYPE_FD 2
extern uint32_t _end;
static const char optstr[NOPT] = "DhaCgmnPprsv";
static const unsigned char flags[NOPT] = {
RBX_DUAL,
RBX_SERIAL,
RBX_ASKNAME,
RBX_CDROM,
RBX_GDB,
RBX_MUTE,
RBX_NOINTR,
RBX_PROBEKBD,
RBX_PAUSE,
RBX_DFLTROOT,
RBX_SINGLE,
RBX_VERBOSE
};
static const char *const dev_nm[NDEV] = {"ad", "da", "fd"};
static const unsigned char dev_maj[NDEV] = {30, 4, 2};
static struct dsk {
unsigned drive;
unsigned type;
unsigned unit;
unsigned slice;
unsigned part;
unsigned start;
int init;
} dsk;
static char cmd[512];
static char kname[1024];
static uint32_t opts;
static struct bootinfo bootinfo;
static uint8_t ioctrl = IO_KEYBOARD;
void exit(int);
static void load(void);
static int parse(void);
static int xfsread(ino_t, void *, size_t);
static int dskread(void *, unsigned, unsigned);
static void printf(const char *,...);
static void putchar(int);
static uint32_t memsize(void);
static int drvread(void *, unsigned, unsigned);
static int keyhit(unsigned);
static int xputc(int);
static int xgetc(int);
static int getc(int);
static void memcpy(void *, const void *, int);
These are changes to allow to use the Intel C/C++ compiler (lang/icc) to build the kernel. It doesn't affect the operation if gcc. Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as icc v8 may define __GNUC__ some parts may look strange but are necessary. Additional changes: - in_cksum.[ch]: * use a generic C version instead of the assembly version in the !gcc case (ASM code breaks with the optimizations icc does) -> no bad checksums with an icc compiled kernel Help from: andre, grehan, das Stolen from: alpha version via ppc version The entire checksum code should IMHO be replaced with the DragonFly version (because it isn't guaranteed future revisions of gcc will include similar optimizations) as in: ---snip--- Revision Changes Path 1.12 +1 -0 src/sys/conf/files.i386 1.4 +142 -558 src/sys/i386/i386/in_cksum.c 1.5 +33 -69 src/sys/i386/include/in_cksum.h 1.5 +2 -0 src/sys/netinet/igmp.c 1.6 +0 -1 src/sys/netinet/in.h 1.6 +2 -0 src/sys/netinet/ip_icmp.c 1.4 +3 -4 src/contrib/ipfilter/ip_compat.h 1.3 +1 -2 src/sbin/natd/icmp.c 1.4 +0 -1 src/sbin/natd/natd.c 1.48 +1 -0 src/sys/conf/files 1.2 +0 -1 src/sys/conf/files.amd64 1.13 +0 -1 src/sys/conf/files.i386 1.5 +0 -1 src/sys/conf/files.pc98 1.7 +1 -1 src/sys/contrib/ipfilter/netinet/fil.c 1.10 +2 -3 src/sys/contrib/ipfilter/netinet/ip_compat.h 1.10 +1 -1 src/sys/contrib/ipfilter/netinet/ip_fil.c 1.7 +1 -1 src/sys/dev/netif/txp/if_txp.c 1.7 +1 -1 src/sys/net/ip_mroute/ip_mroute.c 1.7 +1 -2 src/sys/net/ipfw/ip_fw2.c 1.6 +1 -2 src/sys/netinet/igmp.c 1.4 +158 -116 src/sys/netinet/in_cksum.c 1.6 +1 -1 src/sys/netinet/ip_gre.c 1.7 +1 -2 src/sys/netinet/ip_icmp.c 1.10 +1 -1 src/sys/netinet/ip_input.c 1.10 +1 -2 src/sys/netinet/ip_output.c 1.13 +1 -2 src/sys/netinet/tcp_input.c 1.9 +1 -2 src/sys/netinet/tcp_output.c 1.10 +1 -1 src/sys/netinet/tcp_subr.c 1.10 +1 -1 src/sys/netinet/tcp_syncache.c 1.9 +1 -2 src/sys/netinet/udp_usrreq.c 1.5 +1 -2 src/sys/netinet6/ipsec.c 1.5 +1 -2 src/sys/netproto/ipsec/ipsec.c 1.5 +1 -1 src/sys/netproto/ipsec/ipsec_input.c 1.4 +1 -2 src/sys/netproto/ipsec/ipsec_output.c and finally remove sys/i386/i386 in_cksum.c sys/i386/include in_cksum.h ---snip--- - endian.h: * DTRT in C++ mode - quad.h: * we don't use gcc v1 anymore, remove support for it Suggested by: bde (long ago) - assym.h: * avoid zero-length arrays (remove dependency on a gcc specific feature) This change changes the contents of the object file, but as it's only used to generate some values for a header, and the generator knows how to handle this, there's no impact in the gcc case. Explained by: bde Submitted by: Marius Strobl <marius@alchemy.franken.de> - aicasm.c: * minor change to teach it about the way icc spells "-nostdinc" Not approved by: gibbs (no reply to my mail) - bump __FreeBSD_version (lang/icc needs to know about the changes) Incarnations of this patch survive gcc compiles since a loooong time, I use it on my desktop. An icc compiled kernel works since Nov. 2003 (exceptions: snd_* if used as modules), it survives a build of the entire ports collection with icc. Parts of this commit contains suggestions or submissions from Marius Strobl <marius@alchemy.franken.de>. Reviewed by: -arch Submitted by: netchild
2004-03-12 21:45:33 +00:00
static void
memcpy(void *dst, const void *src, int len)
These are changes to allow to use the Intel C/C++ compiler (lang/icc) to build the kernel. It doesn't affect the operation if gcc. Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as icc v8 may define __GNUC__ some parts may look strange but are necessary. Additional changes: - in_cksum.[ch]: * use a generic C version instead of the assembly version in the !gcc case (ASM code breaks with the optimizations icc does) -> no bad checksums with an icc compiled kernel Help from: andre, grehan, das Stolen from: alpha version via ppc version The entire checksum code should IMHO be replaced with the DragonFly version (because it isn't guaranteed future revisions of gcc will include similar optimizations) as in: ---snip--- Revision Changes Path 1.12 +1 -0 src/sys/conf/files.i386 1.4 +142 -558 src/sys/i386/i386/in_cksum.c 1.5 +33 -69 src/sys/i386/include/in_cksum.h 1.5 +2 -0 src/sys/netinet/igmp.c 1.6 +0 -1 src/sys/netinet/in.h 1.6 +2 -0 src/sys/netinet/ip_icmp.c 1.4 +3 -4 src/contrib/ipfilter/ip_compat.h 1.3 +1 -2 src/sbin/natd/icmp.c 1.4 +0 -1 src/sbin/natd/natd.c 1.48 +1 -0 src/sys/conf/files 1.2 +0 -1 src/sys/conf/files.amd64 1.13 +0 -1 src/sys/conf/files.i386 1.5 +0 -1 src/sys/conf/files.pc98 1.7 +1 -1 src/sys/contrib/ipfilter/netinet/fil.c 1.10 +2 -3 src/sys/contrib/ipfilter/netinet/ip_compat.h 1.10 +1 -1 src/sys/contrib/ipfilter/netinet/ip_fil.c 1.7 +1 -1 src/sys/dev/netif/txp/if_txp.c 1.7 +1 -1 src/sys/net/ip_mroute/ip_mroute.c 1.7 +1 -2 src/sys/net/ipfw/ip_fw2.c 1.6 +1 -2 src/sys/netinet/igmp.c 1.4 +158 -116 src/sys/netinet/in_cksum.c 1.6 +1 -1 src/sys/netinet/ip_gre.c 1.7 +1 -2 src/sys/netinet/ip_icmp.c 1.10 +1 -1 src/sys/netinet/ip_input.c 1.10 +1 -2 src/sys/netinet/ip_output.c 1.13 +1 -2 src/sys/netinet/tcp_input.c 1.9 +1 -2 src/sys/netinet/tcp_output.c 1.10 +1 -1 src/sys/netinet/tcp_subr.c 1.10 +1 -1 src/sys/netinet/tcp_syncache.c 1.9 +1 -2 src/sys/netinet/udp_usrreq.c 1.5 +1 -2 src/sys/netinet6/ipsec.c 1.5 +1 -2 src/sys/netproto/ipsec/ipsec.c 1.5 +1 -1 src/sys/netproto/ipsec/ipsec_input.c 1.4 +1 -2 src/sys/netproto/ipsec/ipsec_output.c and finally remove sys/i386/i386 in_cksum.c sys/i386/include in_cksum.h ---snip--- - endian.h: * DTRT in C++ mode - quad.h: * we don't use gcc v1 anymore, remove support for it Suggested by: bde (long ago) - assym.h: * avoid zero-length arrays (remove dependency on a gcc specific feature) This change changes the contents of the object file, but as it's only used to generate some values for a header, and the generator knows how to handle this, there's no impact in the gcc case. Explained by: bde Submitted by: Marius Strobl <marius@alchemy.franken.de> - aicasm.c: * minor change to teach it about the way icc spells "-nostdinc" Not approved by: gibbs (no reply to my mail) - bump __FreeBSD_version (lang/icc needs to know about the changes) Incarnations of this patch survive gcc compiles since a loooong time, I use it on my desktop. An icc compiled kernel works since Nov. 2003 (exceptions: snd_* if used as modules), it survives a build of the entire ports collection with icc. Parts of this commit contains suggestions or submissions from Marius Strobl <marius@alchemy.franken.de>. Reviewed by: -arch Submitted by: netchild
2004-03-12 21:45:33 +00:00
{
const char *s = src;
char *d = dst;
These are changes to allow to use the Intel C/C++ compiler (lang/icc) to build the kernel. It doesn't affect the operation if gcc. Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as icc v8 may define __GNUC__ some parts may look strange but are necessary. Additional changes: - in_cksum.[ch]: * use a generic C version instead of the assembly version in the !gcc case (ASM code breaks with the optimizations icc does) -> no bad checksums with an icc compiled kernel Help from: andre, grehan, das Stolen from: alpha version via ppc version The entire checksum code should IMHO be replaced with the DragonFly version (because it isn't guaranteed future revisions of gcc will include similar optimizations) as in: ---snip--- Revision Changes Path 1.12 +1 -0 src/sys/conf/files.i386 1.4 +142 -558 src/sys/i386/i386/in_cksum.c 1.5 +33 -69 src/sys/i386/include/in_cksum.h 1.5 +2 -0 src/sys/netinet/igmp.c 1.6 +0 -1 src/sys/netinet/in.h 1.6 +2 -0 src/sys/netinet/ip_icmp.c 1.4 +3 -4 src/contrib/ipfilter/ip_compat.h 1.3 +1 -2 src/sbin/natd/icmp.c 1.4 +0 -1 src/sbin/natd/natd.c 1.48 +1 -0 src/sys/conf/files 1.2 +0 -1 src/sys/conf/files.amd64 1.13 +0 -1 src/sys/conf/files.i386 1.5 +0 -1 src/sys/conf/files.pc98 1.7 +1 -1 src/sys/contrib/ipfilter/netinet/fil.c 1.10 +2 -3 src/sys/contrib/ipfilter/netinet/ip_compat.h 1.10 +1 -1 src/sys/contrib/ipfilter/netinet/ip_fil.c 1.7 +1 -1 src/sys/dev/netif/txp/if_txp.c 1.7 +1 -1 src/sys/net/ip_mroute/ip_mroute.c 1.7 +1 -2 src/sys/net/ipfw/ip_fw2.c 1.6 +1 -2 src/sys/netinet/igmp.c 1.4 +158 -116 src/sys/netinet/in_cksum.c 1.6 +1 -1 src/sys/netinet/ip_gre.c 1.7 +1 -2 src/sys/netinet/ip_icmp.c 1.10 +1 -1 src/sys/netinet/ip_input.c 1.10 +1 -2 src/sys/netinet/ip_output.c 1.13 +1 -2 src/sys/netinet/tcp_input.c 1.9 +1 -2 src/sys/netinet/tcp_output.c 1.10 +1 -1 src/sys/netinet/tcp_subr.c 1.10 +1 -1 src/sys/netinet/tcp_syncache.c 1.9 +1 -2 src/sys/netinet/udp_usrreq.c 1.5 +1 -2 src/sys/netinet6/ipsec.c 1.5 +1 -2 src/sys/netproto/ipsec/ipsec.c 1.5 +1 -1 src/sys/netproto/ipsec/ipsec_input.c 1.4 +1 -2 src/sys/netproto/ipsec/ipsec_output.c and finally remove sys/i386/i386 in_cksum.c sys/i386/include in_cksum.h ---snip--- - endian.h: * DTRT in C++ mode - quad.h: * we don't use gcc v1 anymore, remove support for it Suggested by: bde (long ago) - assym.h: * avoid zero-length arrays (remove dependency on a gcc specific feature) This change changes the contents of the object file, but as it's only used to generate some values for a header, and the generator knows how to handle this, there's no impact in the gcc case. Explained by: bde Submitted by: Marius Strobl <marius@alchemy.franken.de> - aicasm.c: * minor change to teach it about the way icc spells "-nostdinc" Not approved by: gibbs (no reply to my mail) - bump __FreeBSD_version (lang/icc needs to know about the changes) Incarnations of this patch survive gcc compiles since a loooong time, I use it on my desktop. An icc compiled kernel works since Nov. 2003 (exceptions: snd_* if used as modules), it survives a build of the entire ports collection with icc. Parts of this commit contains suggestions or submissions from Marius Strobl <marius@alchemy.franken.de>. Reviewed by: -arch Submitted by: netchild
2004-03-12 21:45:33 +00:00
while (len--)
*d++ = *s++;
These are changes to allow to use the Intel C/C++ compiler (lang/icc) to build the kernel. It doesn't affect the operation if gcc. Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as icc v8 may define __GNUC__ some parts may look strange but are necessary. Additional changes: - in_cksum.[ch]: * use a generic C version instead of the assembly version in the !gcc case (ASM code breaks with the optimizations icc does) -> no bad checksums with an icc compiled kernel Help from: andre, grehan, das Stolen from: alpha version via ppc version The entire checksum code should IMHO be replaced with the DragonFly version (because it isn't guaranteed future revisions of gcc will include similar optimizations) as in: ---snip--- Revision Changes Path 1.12 +1 -0 src/sys/conf/files.i386 1.4 +142 -558 src/sys/i386/i386/in_cksum.c 1.5 +33 -69 src/sys/i386/include/in_cksum.h 1.5 +2 -0 src/sys/netinet/igmp.c 1.6 +0 -1 src/sys/netinet/in.h 1.6 +2 -0 src/sys/netinet/ip_icmp.c 1.4 +3 -4 src/contrib/ipfilter/ip_compat.h 1.3 +1 -2 src/sbin/natd/icmp.c 1.4 +0 -1 src/sbin/natd/natd.c 1.48 +1 -0 src/sys/conf/files 1.2 +0 -1 src/sys/conf/files.amd64 1.13 +0 -1 src/sys/conf/files.i386 1.5 +0 -1 src/sys/conf/files.pc98 1.7 +1 -1 src/sys/contrib/ipfilter/netinet/fil.c 1.10 +2 -3 src/sys/contrib/ipfilter/netinet/ip_compat.h 1.10 +1 -1 src/sys/contrib/ipfilter/netinet/ip_fil.c 1.7 +1 -1 src/sys/dev/netif/txp/if_txp.c 1.7 +1 -1 src/sys/net/ip_mroute/ip_mroute.c 1.7 +1 -2 src/sys/net/ipfw/ip_fw2.c 1.6 +1 -2 src/sys/netinet/igmp.c 1.4 +158 -116 src/sys/netinet/in_cksum.c 1.6 +1 -1 src/sys/netinet/ip_gre.c 1.7 +1 -2 src/sys/netinet/ip_icmp.c 1.10 +1 -1 src/sys/netinet/ip_input.c 1.10 +1 -2 src/sys/netinet/ip_output.c 1.13 +1 -2 src/sys/netinet/tcp_input.c 1.9 +1 -2 src/sys/netinet/tcp_output.c 1.10 +1 -1 src/sys/netinet/tcp_subr.c 1.10 +1 -1 src/sys/netinet/tcp_syncache.c 1.9 +1 -2 src/sys/netinet/udp_usrreq.c 1.5 +1 -2 src/sys/netinet6/ipsec.c 1.5 +1 -2 src/sys/netproto/ipsec/ipsec.c 1.5 +1 -1 src/sys/netproto/ipsec/ipsec_input.c 1.4 +1 -2 src/sys/netproto/ipsec/ipsec_output.c and finally remove sys/i386/i386 in_cksum.c sys/i386/include in_cksum.h ---snip--- - endian.h: * DTRT in C++ mode - quad.h: * we don't use gcc v1 anymore, remove support for it Suggested by: bde (long ago) - assym.h: * avoid zero-length arrays (remove dependency on a gcc specific feature) This change changes the contents of the object file, but as it's only used to generate some values for a header, and the generator knows how to handle this, there's no impact in the gcc case. Explained by: bde Submitted by: Marius Strobl <marius@alchemy.franken.de> - aicasm.c: * minor change to teach it about the way icc spells "-nostdinc" Not approved by: gibbs (no reply to my mail) - bump __FreeBSD_version (lang/icc needs to know about the changes) Incarnations of this patch survive gcc compiles since a loooong time, I use it on my desktop. An icc compiled kernel works since Nov. 2003 (exceptions: snd_* if used as modules), it survives a build of the entire ports collection with icc. Parts of this commit contains suggestions or submissions from Marius Strobl <marius@alchemy.franken.de>. Reviewed by: -arch Submitted by: netchild
2004-03-12 21:45:33 +00:00
}
static inline int
strcmp(const char *s1, const char *s2)
{
for (; *s1 == *s2 && *s1; s1++, s2++);
return (unsigned char)*s1 - (unsigned char)*s2;
}
#include "ufsread.c"
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int
xfsread(ino_t inode, void *buf, size_t nbyte)
{
if ((size_t)fsread(inode, buf, nbyte) != nbyte) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
printf("Invalid %s\n", "format");
return -1;
}
return 0;
}
static inline uint32_t
memsize(void)
{
v86.addr = MEM_EXT;
v86.eax = 0x8800;
v86int();
return v86.eax;
}
static inline void
getstr(void)
{
char *s;
int c;
s = cmd;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
for (;;) {
switch (c = xgetc(0)) {
case 0:
break;
case '\177':
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
case '\b':
if (s > cmd) {
s--;
printf("\b \b");
}
break;
case '\n':
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
case '\r':
*s = 0;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return;
default:
if (s - cmd < sizeof(cmd) - 1)
*s++ = c;
putchar(c);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
}
static inline void
putc(int c)
{
v86.addr = 0x10;
v86.eax = 0xe00 | (c & 0xff);
v86.ebx = 0x7;
v86int();
}
int
main(void)
{
2002-12-14 19:09:37 +00:00
int autoboot;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ino_t ino;
dmadat = (void *)(roundup2(__base + (int32_t)&_end, 0x10000) - __base);
v86.ctl = V86_FLAGS;
dsk.drive = *(uint8_t *)PTOV(ARGS);
dsk.type = dsk.drive & DRV_HARD ? TYPE_AD : TYPE_FD;
dsk.unit = dsk.drive & DRV_MASK;
dsk.slice = *(uint8_t *)PTOV(ARGS + 1) + 1;
bootinfo.bi_version = BOOTINFO_VERSION;
bootinfo.bi_size = sizeof(bootinfo);
bootinfo.bi_basemem = 0; /* XXX will be filled by loader or kernel */
bootinfo.bi_extmem = memsize();
bootinfo.bi_memsizes_valid++;
/* Process configuration file */
autoboot = 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((ino = lookup(PATH_CONFIG)))
fsread(ino, cmd, sizeof(cmd));
if (*cmd) {
printf("%s: %s", PATH_CONFIG, cmd);
if (parse())
autoboot = 0;
/* Do not process this command twice */
*cmd = 0;
}
/*
* Try to exec stage 3 boot loader. If interrupted by a keypress,
* or in case of failure, try to load a kernel directly instead.
*/
if (autoboot && !*kname) {
memcpy(kname, PATH_BOOT3, sizeof(PATH_BOOT3));
if (!keyhit(3*SECOND)) {
load();
memcpy(kname, PATH_KERNEL, sizeof(PATH_KERNEL));
}
}
/* Present the user with the boot2 prompt. */
for (;;) {
printf("\nFreeBSD/i386 boot\n"
"Default: %u:%s(%u,%c)%s\n"
"boot: ",
dsk.drive & DRV_MASK, dev_nm[dsk.type], dsk.unit,
1999-01-11 11:36:03 +00:00
'a' + dsk.part, kname);
if (ioctrl & IO_SERIAL)
sio_flush();
if (!autoboot || keyhit(5*SECOND))
getstr();
else
putchar('\n');
1999-01-11 11:36:03 +00:00
autoboot = 0;
if (parse())
putchar('\a');
else
load();
}
}
/* XXX - Needed for btxld to link the boot2 binary; do not remove. */
void
exit(int x)
{
}
static void
load(void)
{
union {
struct exec ex;
Elf32_Ehdr eh;
} hdr;
Elf32_Phdr ep[2];
Elf32_Shdr es[2];
caddr_t p;
ino_t ino;
uint32_t addr, x;
int fmt, i, j;
if (!(ino = lookup(kname))) {
if (!ls)
printf("No %s\n", kname);
return;
}
if (xfsread(ino, &hdr, sizeof(hdr)))
return;
if (N_GETMAGIC(hdr.ex) == ZMAGIC)
fmt = 0;
else if (IS_ELF(hdr.eh))
fmt = 1;
else {
printf("Invalid %s\n", "format");
return;
}
if (fmt == 0) {
addr = hdr.ex.a_entry & 0xffffff;
p = PTOV(addr);
fs_off = PAGE_SIZE;
if (xfsread(ino, p, hdr.ex.a_text))
return;
p += roundup2(hdr.ex.a_text, PAGE_SIZE);
if (xfsread(ino, p, hdr.ex.a_data))
return;
p += hdr.ex.a_data + roundup2(hdr.ex.a_bss, PAGE_SIZE);
bootinfo.bi_symtab = VTOP(p);
memcpy(p, &hdr.ex.a_syms, sizeof(hdr.ex.a_syms));
p += sizeof(hdr.ex.a_syms);
if (hdr.ex.a_syms) {
if (xfsread(ino, p, hdr.ex.a_syms))
return;
p += hdr.ex.a_syms;
if (xfsread(ino, p, sizeof(int)))
return;
x = *(uint32_t *)p;
p += sizeof(int);
x -= sizeof(int);
if (xfsread(ino, p, x))
return;
p += x;
}
} else {
fs_off = hdr.eh.e_phoff;
for (j = i = 0; i < hdr.eh.e_phnum && j < 2; i++) {
if (xfsread(ino, ep + j, sizeof(ep[0])))
return;
if (ep[j].p_type == PT_LOAD)
j++;
}
for (i = 0; i < 2; i++) {
p = PTOV(ep[i].p_paddr & 0xffffff);
fs_off = ep[i].p_offset;
if (xfsread(ino, p, ep[i].p_filesz))
return;
}
p += roundup2(ep[1].p_memsz, PAGE_SIZE);
bootinfo.bi_symtab = VTOP(p);
if (hdr.eh.e_shnum == hdr.eh.e_shstrndx + 3) {
fs_off = hdr.eh.e_shoff + sizeof(es[0]) *
(hdr.eh.e_shstrndx + 1);
if (xfsread(ino, &es, sizeof(es)))
return;
for (i = 0; i < 2; i++) {
memcpy(p, &es[i].sh_size, sizeof(es[i].sh_size));
p += sizeof(es[i].sh_size);
fs_off = es[i].sh_offset;
if (xfsread(ino, p, es[i].sh_size))
return;
p += es[i].sh_size;
}
}
addr = hdr.eh.e_entry & 0xffffff;
}
bootinfo.bi_esymtab = VTOP(p);
bootinfo.bi_kernelname = VTOP(kname);
bootinfo.bi_bios_dev = dsk.drive;
__exec((caddr_t)addr, RB_BOOTINFO | (opts & RBX_MASK),
MAKEBOOTDEV(dev_maj[dsk.type], 0, dsk.slice, dsk.unit, dsk.part),
0, 0, 0, VTOP(&bootinfo));
}
static int
parse()
{
char *arg = cmd;
char *p, *q;
unsigned int drv;
int c, i;
while ((c = *arg++)) {
if (c == ' ' || c == '\t' || c == '\n')
continue;
for (p = arg; *p && *p != '\n' && *p != ' ' && *p != '\t'; p++);
if (*p)
*p++ = 0;
if (c == '-') {
while ((c = *arg++)) {
for (i = 0; c != optstr[i]; i++)
if (i == NOPT - 1)
return -1;
opts ^= 1 << flags[i];
}
if (opts & 1 << RBX_PROBEKBD) {
i = *(uint8_t *)PTOV(0x496) & 0x10;
printf("Keyboard: %s\n", i ? "yes" : "no");
if (!i)
opts |= 1 << RBX_DUAL | 1 << RBX_SERIAL;
opts &= ~(1 << RBX_PROBEKBD);
}
ioctrl = opts & 1 << RBX_DUAL ? (IO_SERIAL|IO_KEYBOARD) :
opts & 1 << RBX_SERIAL ? IO_SERIAL : IO_KEYBOARD;
if (ioctrl & IO_SERIAL)
sio_init();
} else {
for (q = arg--; *q && *q != '('; q++);
if (*q) {
drv = -1;
if (arg[1] == ':') {
drv = *arg - '0';
if (drv > 9)
return (-1);
arg += 2;
}
if (q - arg != 2)
return -1;
for (i = 0; arg[0] != dev_nm[i][0] ||
arg[1] != dev_nm[i][1]; i++)
if (i == NDEV - 1)
return -1;
dsk.type = i;
arg += 3;
dsk.unit = *arg - '0';
if (arg[1] != ',' || dsk.unit > 9)
return -1;
arg += 2;
dsk.slice = WHOLE_DISK_SLICE;
if (arg[1] == ',') {
dsk.slice = *arg - '0' + 1;
if (dsk.slice > NDOSPART)
return -1;
arg += 2;
}
if (arg[1] != ')')
return -1;
dsk.part = *arg - 'a';
if (dsk.part > 7)
return (-1);
arg += 2;
if (drv == -1)
drv = dsk.unit;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dsk.drive = (dsk.type <= TYPE_MAXHARD
? DRV_HARD : 0) + drv;
dsk_meta = 0;
}
if ((i = p - arg - !*(p - 1))) {
if ((size_t)i >= sizeof(kname))
return -1;
memcpy(kname, arg, i + 1);
}
}
arg = p;
}
return 0;
}
static int
dskread(void *buf, unsigned lba, unsigned nblk)
{
struct dos_partition *dp;
struct disklabel *d;
char *sec;
unsigned sl, i;
if (!dsk_meta) {
sec = dmadat->secbuf;
dsk.start = 0;
if (drvread(sec, DOSBBSECTOR, 1))
return -1;
dp = (void *)(sec + DOSPARTOFF);
sl = dsk.slice;
if (sl < BASE_SLICE) {
for (i = 0; i < NDOSPART; i++)
if (dp[i].dp_typ == DOSPTYP_386BSD &&
(dp[i].dp_flag & 0x80 || sl < BASE_SLICE)) {
sl = BASE_SLICE + i;
if (dp[i].dp_flag & 0x80 ||
dsk.slice == COMPATIBILITY_SLICE)
break;
}
if (dsk.slice == WHOLE_DISK_SLICE)
dsk.slice = sl;
}
if (sl != WHOLE_DISK_SLICE) {
if (sl != COMPATIBILITY_SLICE)
dp += sl - BASE_SLICE;
if (dp->dp_typ != DOSPTYP_386BSD) {
printf("Invalid %s\n", "slice");
return -1;
}
dsk.start = dp->dp_start;
}
if (drvread(sec, dsk.start + LABELSECTOR, 1))
return -1;
d = (void *)(sec + LABELOFFSET);
if (d->d_magic != DISKMAGIC || d->d_magic2 != DISKMAGIC) {
if (dsk.part != RAW_PART) {
printf("Invalid %s\n", "label");
return -1;
}
} else {
if (!dsk.init) {
if (d->d_type == DTYPE_SCSI)
dsk.type = TYPE_DA;
dsk.init++;
}
if (dsk.part >= d->d_npartitions ||
!d->d_partitions[dsk.part].p_size) {
printf("Invalid %s\n", "partition");
return -1;
}
dsk.start += d->d_partitions[dsk.part].p_offset;
dsk.start -= d->d_partitions[RAW_PART].p_offset;
}
}
return drvread(buf, dsk.start + lba, nblk);
}
static void
printf(const char *fmt,...)
{
va_list ap;
char buf[10];
char *s;
unsigned u;
int c;
va_start(ap, fmt);
while ((c = *fmt++)) {
if (c == '%') {
c = *fmt++;
switch (c) {
case 'c':
putchar(va_arg(ap, int));
continue;
case 's':
for (s = va_arg(ap, char *); *s; s++)
putchar(*s);
continue;
case 'u':
u = va_arg(ap, unsigned);
s = buf;
do
*s++ = '0' + u % 10U;
while (u /= 10U);
while (--s >= buf)
putchar(*s);
continue;
}
}
putchar(c);
}
va_end(ap);
return;
}
static void
putchar(int c)
{
if (c == '\n')
xputc('\r');
xputc(c);
}
static int
drvread(void *buf, unsigned lba, unsigned nblk)
{
static unsigned c = 0x2d5c7c2f;
printf("%c\b", c = c << 8 | c >> 24);
v86.ctl = V86_ADDR | V86_CALLF | V86_FLAGS;
v86.addr = XREADORG; /* call to xread in boot1 */
v86.es = VTOPSEG(buf);
v86.eax = lba;
v86.ebx = VTOPOFF(buf);
v86.ecx = lba >> 16;
v86.edx = nblk << 8 | dsk.drive;
v86int();
v86.ctl = V86_FLAGS;
if (V86_CY(v86.efl)) {
printf("error %u lba %u\n", v86.eax >> 8 & 0xff, lba);
return -1;
}
return 0;
}
static int
keyhit(unsigned ticks)
{
uint32_t t0, t1;
if (opts & 1 << RBX_NOINTR)
return 0;
t0 = 0;
for (;;) {
if (xgetc(1))
return 1;
t1 = *(uint32_t *)PTOV(0x46c);
if (!t0)
t0 = t1;
if (t1 < t0 || t1 >= t0 + ticks)
return 0;
}
}
static int
xputc(int c)
{
if (ioctrl & IO_KEYBOARD)
putc(c);
if (ioctrl & IO_SERIAL)
sio_putc(c);
return c;
}
static int
xgetc(int fn)
{
if (opts & 1 << RBX_NOINTR)
return 0;
for (;;) {
if (ioctrl & IO_KEYBOARD && getc(1))
return fn ? 1 : getc(0);
if (ioctrl & IO_SERIAL && sio_ischar())
return fn ? 1 : sio_getc();
if (fn)
return 0;
}
}
static int
getc(int fn)
{
v86.addr = 0x16;
v86.eax = fn << 8;
v86int();
return fn == 0 ? v86.eax & 0xff : !V86_ZR(v86.efl);
}