freebsd-dev/cddl/usr.sbin/zfsd/vdev.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

189 lines
5.4 KiB
C
Raw Normal View History

zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
/*-
* Copyright (c) 2011, 2012, 2013 Spectra Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* Authors: Justin T. Gibbs (Spectra Logic Corporation)
*
* $FreeBSD$
*/
/**
* \file vdev.h
*
* Definition of the Vdev class.
*
* Header requirements:
*
* #include <string>
* #include <list>
*
* #include <devdctl/guid.h>
*/
#ifndef _VDEV_H_
#define _VDEV_H_
/*=========================== Forward Declarations ===========================*/
struct zpool_handle;
typedef struct zpool_handle zpool_handle_t;
struct nvlist;
typedef struct nvlist nvlist_t;
/*============================= Class Definitions ============================*/
/*----------------------------------- Vdev -----------------------------------*/
/**
* \brief Wrapper class for a vdev's name/value configuration list
* simplifying access to commonly used vdev attributes.
*/
class Vdev
{
public:
/**
* \brief Instantiate a vdev object for a vdev that is a member
* of an imported pool.
*
* \param pool The pool object containing the vdev with
* configuration data provided in vdevConfig.
* \param vdevConfig Vdev configuration data.
*
* This method should be used whenever dealing with vdev's
* enumerated via the ZpoolList class. The in-core configuration
* data for a vdev does not contain all of the items found in
* the on-disk label. This requires the vdev class to augment
* the data in vdevConfig with data found in the pool object.
*/
Vdev(zpool_handle_t *pool, nvlist_t *vdevConfig);
/**
* \brief Instantiate a vdev object for a vdev that is a member
* of a pool configuration.
*
* \param poolConfig The pool configuration containing the vdev
* configuration data provided in vdevConfig.
* \param vdevConfig Vdev configuration data.
*
* This method should be used whenever dealing with vdev's
* enumerated via the ZpoolList class. The in-core configuration
* data for a vdev does not contain all of the items found in
* the on-disk label. This requires the vdev class to augment
* the data in vdevConfig with data found in the pool object.
*/
Vdev(nvlist_t *poolConfig, nvlist_t *vdevConfig);
/**
* \brief Instantiate a vdev object from a ZFS label stored on
* the device.
*
* \param vdevConfig The name/value list retrieved by reading
* the label information on a leaf vdev.
*/
Vdev(nvlist_t *vdevConfig);
/**
* \brief No-op copy constructor for nonexistent vdevs.
*/
Vdev();
/**
* \brief No-op virtual destructor, since this class has virtual
* functions.
*/
virtual ~Vdev();
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
bool DoesNotExist() const;
/**
* \brief Return a list of the vdev's children.
*/
std::list<Vdev> Children();
virtual DevdCtl::Guid GUID() const;
bool IsSpare() const;
virtual DevdCtl::Guid PoolGUID() const;
virtual vdev_state State() const;
std::string Path() const;
virtual std::string PhysicalPath() const;
std::string GUIDString() const;
nvlist_t *PoolConfig() const;
nvlist_t *Config() const;
Vdev Parent();
Vdev RootVdev();
std::string Name(zpool_handle_t *, bool verbose) const;
bool IsSpare();
bool IsAvailableSpare() const;
bool IsActiveSpare() const;
bool IsResilvering() const;
private:
void VdevLookupGuid();
bool VdevLookupPoolGuid();
DevdCtl::Guid m_poolGUID;
DevdCtl::Guid m_vdevGUID;
nvlist_t *m_poolConfig;
nvlist_t *m_config;
};
//- Special objects -----------------------------------------------------------
extern Vdev NonexistentVdev;
//- Vdev Inline Public Methods ------------------------------------------------
inline Vdev::~Vdev()
{
}
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
inline DevdCtl::Guid
Vdev::PoolGUID() const
{
return (m_poolGUID);
}
inline DevdCtl::Guid
Vdev::GUID() const
{
return (m_vdevGUID);
}
inline nvlist_t *
Vdev::PoolConfig() const
{
return (m_poolConfig);
}
inline nvlist_t *
Vdev::Config() const
{
return (m_config);
}
inline bool
Vdev::DoesNotExist() const
{
return (m_config == NULL);
}
#endif /* _VDEV_H_ */