2023-01-13 23:52:47 +00:00
.TH "unbound.conf" "5" "Jan 12, 2023" "NLnet Labs" "unbound 1.17.1"
2012-07-04 14:24:26 +00:00
. \"
. \" unbound.conf.5 -- unbound.conf manual
. \"
. \" Copyright (c) 2007, NLnet Labs. All rights reserved.
. \"
. \" See LICENSE for the license.
. \"
. \"
.SH "NAME"
.B unbound.conf
\- Unbound configuration file.
.SH "SYNOPSIS"
.B unbound.conf
.SH "DESCRIPTION"
.B unbound.conf
is used to configure
\fI unbound\fR (8).
2018-05-12 11:54:35 +00:00
The file format has attributes and values. Some attributes have attributes
inside them.
2012-07-04 14:24:26 +00:00
The notation is: attribute: value.
.P
Comments start with # and last to the end of line. Empty lines are
ignored as is whitespace at the beginning of a line.
.P
2018-05-12 11:54:35 +00:00
The utility
2012-07-04 14:24:26 +00:00
\fI unbound\- checkconf\fR (8)
can be used to check unbound.conf prior to usage.
.SH "EXAMPLE"
An example config file is shown below. Copy this to /etc/unbound/unbound.conf
and start the server with:
.P
.nf
2018-05-12 11:54:35 +00:00
$ unbound \- c /etc/unbound/unbound.conf
2012-07-04 14:24:26 +00:00
.fi
.P
Most settings are the defaults. Stop the server with:
.P
.nf
$ kill `cat /etc/unbound/unbound.pid`
.fi
.P
Below is a minimal config file. The source distribution contains an extensive
example.conf file with all the options.
.P
.nf
# unbound.conf(5) config file for unbound(8).
server:
directory: "/etc/unbound"
username: unbound
# make sure unbound can access entropy from inside the chroot.
# e.g. on linux the use these commands (on BSD, devfs(8) is used):
2019-12-28 05:27:06 +00:00
# mount \- \- bind \- n /dev/urandom /etc/unbound/dev/urandom
2012-07-04 14:24:26 +00:00
# and mount \- \- bind \- n /dev/log /etc/unbound/dev/log
chroot: "/etc/unbound"
# logfile: "/etc/unbound/unbound.log" #uncomment to use logfile.
pidfile: "/etc/unbound/unbound.pid"
# verbosity: 1 # uncomment and increase to get more logging.
# listen on all interfaces, answer queries from the local subnet.
interface: 0.0.0.0
interface: ::0
access\- control: 10.0.0.0/8 allow
access\- control: 2001:DB8::/64 allow
.fi
.SH "FILE FORMAT"
2020-05-21 05:01:52 +00:00
There must be whitespace between keywords. Attribute keywords end with a
colon ':'. An attribute is followed by a value, or its containing attributes
in which case it is referred to as a clause. Clauses can be repeated throughout
the file (or included files) to group attributes under the same clause.
2012-07-04 14:24:26 +00:00
.P
Files can be included using the
.B include:
2013-04-05 09:06:26 +00:00
directive. It can appear anywhere, it accepts a single file name as argument.
2012-07-04 14:24:26 +00:00
Processing continues as if the text from the included file was copied into
the config file at that point. If also using chroot, using full path names
for the included files works, relative pathnames for the included names work
2018-05-12 11:54:35 +00:00
if the directory where the daemon is started equals its chroot/working
2016-09-27 21:11:07 +00:00
directory or is specified before the include statement with directory: dir.
Wildcards can be used to include multiple files, see \fI glob\fR (7).
2020-08-21 22:56:05 +00:00
.P
For a more structural include option, the
.B include\-toplevel:
directive can be used. This closes whatever clause is currently active (if any)
and forces the use of clauses in the included files and right after this
directive.
2012-07-04 14:24:26 +00:00
.SS "Server Options"
These options are part of the
.B server:
clause.
.TP
.B verbosity: \fI <number>
2021-08-16 23:55:17 +00:00
The verbosity number, level 0 means no verbosity, only errors. Level 1
gives operational information. Level 2 gives detailed operational
information including short information per query. Level 3 gives query level
information, output per query. Level 4 gives algorithm level information.
Level 5 logs client identification for cache misses. Default is level 1.
2012-07-04 14:24:26 +00:00
The verbosity can also be increased from the commandline, see \fI unbound\fR (8).
.TP
.B statistics\-interval: \fI <seconds>
The number of seconds between printing statistics to the log for every thread.
Disable with value 0 or "". Default is disabled. The histogram statistics
2018-05-12 11:54:35 +00:00
are only printed if replies were sent during the statistics interval,
2012-07-04 14:24:26 +00:00
requestlist statistics are printed for every interval (but can be 0).
This is because the median calculation requires data to be present.
.TP
.B statistics\-cumulative: \fI <yes or no>
2022-02-17 22:47:14 +00:00
If enabled, statistics are cumulative since starting Unbound, without clearing
2012-07-04 14:24:26 +00:00
the statistics counters after logging the statistics. Default is no.
.TP
.B extended\-statistics: \fI <yes or no>
2018-05-12 11:54:35 +00:00
If enabled, extended statistics are printed from \fI unbound\- control\fR (8).
2012-07-04 14:24:26 +00:00
Default is off, because keeping track of more statistics takes time. The
counters are listed in \fI unbound\- control\fR (8).
.TP
2023-01-13 23:52:47 +00:00
.B statistics\-inhibit\-zero: \fI <yes or no>
If enabled, selected extended statistics with a value of 0 are inhibited from
printing with \fI unbound\- control\fR (8).
These are query types, query classes, query opcodes, answer rcodes
(except NOERROR, FORMERR, SERVFAIL, NXDOMAIN, NOTIMPL, REFUSED) and
RPZ actions.
Default is on.
.TP
2012-07-04 14:24:26 +00:00
.B num\-threads: \fI <number>
The number of threads to create to serve clients. Use 1 for no threading.
.TP
.B port: \fI <port number>
The port number, default 53, on which the server responds to queries.
.TP
2022-10-16 19:24:20 +00:00
.B interface: \fI <ip address or interface name [@port]>
2012-07-04 14:24:26 +00:00
Interface to use to connect to the network. This interface is listened to
for queries from clients, and answers to clients are given from it.
2018-05-12 11:54:35 +00:00
Can be given multiple times to work on several interfaces. If none are
2020-10-27 15:09:16 +00:00
given the default is to listen to localhost. If an interface name is used
instead of an ip address, the list of ip addresses on that interface are used.
2012-07-04 14:24:26 +00:00
The interfaces are not changed on a reload (kill \- HUP) but only on restart.
A port number can be specified with @port (without spaces between
interface and port number), if not specified the default port (from
\fB port\fR ) is used.
.TP
2022-10-16 19:24:20 +00:00
.B ip\-address: \fI <ip address or interface name [@port]>
2018-09-10 16:32:55 +00:00
Same as interface: (for ease of compatibility with nsd.conf).
2014-05-14 18:44:22 +00:00
.TP
2012-07-04 14:24:26 +00:00
.B interface\-automatic: \fI <yes or no>
2020-08-21 22:56:05 +00:00
Listen on all addresses on all (current and future) interfaces, detect the
source interface on UDP queries and copy them to replies. This is a lot like
ip\- transparent, but this option services all interfaces whilst with
2022-02-17 22:47:14 +00:00
ip\- transparent you can select which (future) interfaces Unbound provides
2020-08-21 22:56:05 +00:00
service on. This feature is experimental, and needs support in your OS for
particular socket options. Default value is no.
2012-07-04 14:24:26 +00:00
.TP
2022-06-08 14:43:13 +00:00
.B interface\-automatic\-ports: \fI <string>
List the port numbers that interface-automatic listens on. If empty, the
default port is listened on. The port numbers are separated by spaces in the
string. Default is "".
.IP
This can be used to have interface automatic to deal with the interface,
and listen on the normal port number, by including it in the list, and
also https or dns over tls port numbers by putting them in the list as well.
.TP
2016-09-27 21:11:07 +00:00
.B outgoing\-interface: \fI <ip address or ip6 netblock>
2012-07-04 14:24:26 +00:00
Interface to use to connect to the network. This interface is used to send
2018-05-12 11:54:35 +00:00
queries to authoritative servers and receive their replies. Can be given
multiple times to work on several interfaces. If none are given the
default (all) is used. You can specify the same interfaces in
2012-07-04 14:24:26 +00:00
.B interface:
and
.B outgoing\-interface:
2018-05-12 11:54:35 +00:00
lines, the interfaces are then used for both purposes. Outgoing queries are
2012-07-04 14:24:26 +00:00
sent via a random outgoing interface to counter spoofing.
2016-09-27 21:11:07 +00:00
.IP
If an IPv6 netblock is specified instead of an individual IPv6 address,
outgoing UDP queries will use a randomised source address taken from the
netblock to counter spoofing. Requires the IPv6 netblock to be routed to the
2022-02-17 22:47:14 +00:00
host running Unbound, and requires OS support for unprivileged non-local binds
2016-09-27 21:11:07 +00:00
(currently only supported on Linux). Several netblocks may be specified with
multiple
.B outgoing\-interface:
options, but do not specify both an individual IPv6 address and an IPv6
netblock, or the randomisation will be compromised. Consider combining with
.B prefer\-ip6: yes
to increase the likelihood of IPv6 nameservers being selected for queries.
On Linux you need these two commands to be able to use the freebind socket
option to receive traffic for the ip6 netblock:
2017-02-03 13:06:34 +00:00
ip \- 6 addr add mynetblock/64 dev lo &&
ip \- 6 route add local mynetblock/64 dev lo
2012-07-04 14:24:26 +00:00
.TP
.B outgoing\-range: \fI <number>
2018-05-12 11:54:35 +00:00
Number of ports to open. This number of file descriptors can be opened per
thread. Must be at least 1. Default depends on compile options. Larger
2012-07-04 14:24:26 +00:00
numbers need extra resources from the operating system. For performance a
2016-09-27 21:11:07 +00:00
very large value is best, use libevent to make this possible.
2012-07-04 14:24:26 +00:00
.TP
.B outgoing\-port\-permit: \fI <port number or range>
2022-02-17 22:47:14 +00:00
Permit Unbound to open this port or range of ports for use to send queries.
2012-07-04 14:24:26 +00:00
A larger number of permitted outgoing ports increases resilience against
2018-05-12 11:54:35 +00:00
spoofing attempts. Make sure these ports are not needed by other daemons.
2012-07-04 14:24:26 +00:00
By default only ports above 1024 that have not been assigned by IANA are used.
Give a port number or a range of the form "low\- high", without spaces.
.IP
2018-05-12 11:54:35 +00:00
The \fB outgoing\- port\- permit\fR and \fB outgoing\- port\- avoid\fR statements
are processed in the line order of the config file, adding the permitted ports
and subtracting the avoided ports from the set of allowed ports. The
processing starts with the non IANA allocated ports above 1024 in the set
2012-07-04 14:24:26 +00:00
of allowed ports.
.TP
.B outgoing\-port\-avoid: \fI <port number or range>
2022-02-17 22:47:14 +00:00
Do not permit Unbound to open this port or range of ports for use to send
queries. Use this to make sure Unbound does not grab a port that another
2012-07-04 14:24:26 +00:00
daemon needs. The port is avoided on all outgoing interfaces, both IP4 and IP6.
By default only ports above 1024 that have not been assigned by IANA are used.
Give a port number or a range of the form "low\- high", without spaces.
.TP
.B outgoing\-num\-tcp: \fI <number>
2015-09-17 15:21:27 +00:00
Number of outgoing TCP buffers to allocate per thread. Default is 10. If
set to 0, or if do\- tcp is "no", no TCP queries to authoritative servers
are done. For larger installations increasing this value is a good idea.
2012-07-04 14:24:26 +00:00
.TP
.B incoming\-num\-tcp: \fI <number>
2015-09-17 15:21:27 +00:00
Number of incoming TCP buffers to allocate per thread. Default is
10. If set to 0, or if do\- tcp is "no", no TCP queries from clients are
accepted. For larger installations increasing this value is a good idea.
2012-07-04 14:24:26 +00:00
.TP
.B edns\-buffer\-size: \fI <number>
Number of bytes size to advertise as the EDNS reassembly buffer size.
This is the value put into datagrams over UDP towards peers. The actual
buffer size is determined by msg\- buffer\- size (both for TCP and UDP). Do
2020-10-27 15:09:16 +00:00
not set higher than that value. Default is 1232 which is the DNS Flag Day 2020
recommendation. Setting to 512 bypasses even the most stringent path MTU
problems, but is seen as extreme, since the amount of TCP fallback generated is
excessive (probably also for this resolver, consider tuning the outgoing tcp
number).
2012-07-04 14:24:26 +00:00
.TP
2014-05-14 18:43:20 +00:00
.B max\-udp\-size: \fI <number>
Maximum UDP response size (not applied to TCP response). 65536 disables the
udp response size maximum, and uses the choice from the client, always.
2018-05-12 11:54:35 +00:00
Suggested values are 512 to 4096. Default is 4096.
2014-05-14 18:43:20 +00:00
.TP
2019-02-06 12:31:02 +00:00
.B stream\-wait\-size: \fI <number>
Number of bytes size maximum to use for waiting stream buffers. Default is
4 megabytes. A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes,
megabytes or gigabytes (1024*1024 bytes in a megabyte). As TCP and TLS streams
queue up multiple results, the amount of memory used for these buffers does
not exceed this number, otherwise the responses are dropped. This manages
the total memory usage of the server (under heavy use), the number of requests
that can be queued up per connection is also limited, with further requests
waiting in TCP buffers.
.TP
2012-07-04 14:24:26 +00:00
.B msg\-buffer\-size: \fI <number>
Number of bytes size of the message buffers. Default is 65552 bytes, enough
for 64 Kb packets, the maximum DNS message size. No message larger than this
can be sent or received. Can be reduced to use less memory, but some requests
2018-05-12 11:54:35 +00:00
for DNS data, such as for huge resource records, will result in a SERVFAIL
2012-07-04 14:24:26 +00:00
reply to the client.
.TP
.B msg\-cache\-size: \fI <number>
Number of bytes size of the message cache. Default is 4 megabytes.
A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes, megabytes
or gigabytes (1024*1024 bytes in a megabyte).
.TP
.B msg\-cache\-slabs: \fI <number>
Number of slabs in the message cache. Slabs reduce lock contention by threads.
2018-05-12 11:54:35 +00:00
Must be set to a power of 2. Setting (close) to the number of cpus is a
2012-07-04 14:24:26 +00:00
reasonable guess.
.TP
.B num\-queries\-per\-thread: \fI <number>
The number of queries that every thread will service simultaneously.
If more queries arrive that need servicing, and no queries can be jostled out
(see \fI jostle\- timeout\fR ), then the queries are dropped. This forces
the client to resend after a timeout; allowing the server time to work on
the existing queries. Default depends on compile options, 512 or 1024.
.TP
.B jostle\-timeout: \fI <msec>
Timeout used when the server is very busy. Set to a value that usually
2018-05-12 11:54:35 +00:00
results in one roundtrip to the authority servers. If too many queries
2012-07-04 14:24:26 +00:00
arrive, then 50% of the queries are allowed to run to completion, and
2018-05-12 11:54:35 +00:00
the other 50% are replaced with the new incoming query if they have already
spent more than their allowed time. This protects against denial of
2012-07-04 14:24:26 +00:00
service by slow queries or high query rates. Default 200 milliseconds.
2018-05-12 11:54:35 +00:00
The effect is that the qps for long-lasting queries is about
2012-07-04 14:24:26 +00:00
(numqueriesperthread / 2) / (average time for such long queries) qps.
The qps for short queries can be about (numqueriesperthread / 2)
/ (jostletimeout in whole seconds) qps per thread, about (1024/2)*5 = 2560
qps by default.
.TP
2014-05-14 18:44:22 +00:00
.B delay\-close: \fI <msec>
Extra delay for timeouted UDP ports before they are closed, in msec.
Default is 0, and that disables it. This prevents very delayed answer
packets from the upstream (recursive) servers from bouncing against
closed ports and setting off all sort of close-port counters, with
eg. 1500 msec. When timeouts happen you need extra sockets, it checks
the ID and remote IP of packets, and unwanted packets are added to the
unwanted packet counter.
.TP
2020-12-08 21:23:03 +00:00
.B udp\-connect: \fI <yes or no>
Perform connect for UDP sockets that mitigates ICMP side channel leakage.
Default is yes.
.TP
2019-02-06 12:31:02 +00:00
.B unknown\-server\-time\-limit: \fI <msec>
The wait time in msec for waiting for an unknown server to reply.
Increase this if you are behind a slow satellite link, to eg. 1128.
That would then avoid re\- querying every initial query because it times out.
Default is 376 msec.
.TP
2012-07-04 14:24:26 +00:00
.B so\-rcvbuf: \fI <number>
If not 0, then set the SO_RCVBUF socket option to get more buffer
space on UDP port 53 incoming queries. So that short spikes on busy
servers do not drop packets (see counter in netstat \- su). Default is
0 (use system value). Otherwise, the number of bytes to ask for, try
2022-02-17 22:47:14 +00:00
"4m" on a busy server. The OS caps it at a maximum, on linux Unbound
2012-07-04 14:24:26 +00:00
needs root permission to bypass the limit, or the admin can use sysctl
net.core.rmem_max. On BSD change kern.ipc.maxsockbuf in /etc/sysctl.conf.
On OpenBSD change header and recompile kernel. On Solaris ndd \- set
/dev/udp udp_max_buf 8388608.
.TP
.B so\-sndbuf: \fI <number>
If not 0, then set the SO_SNDBUF socket option to get more buffer space on
UDP port 53 outgoing queries. This for very busy servers handles spikes
in answer traffic, otherwise 'send: resource temporarily unavailable'
can get logged, the buffer overrun is also visible by netstat \- su.
Default is 0 (use system value). Specify the number of bytes to ask
for, try "4m" on a very busy server. The OS caps it at a maximum, on
2022-02-17 22:47:14 +00:00
linux Unbound needs root permission to bypass the limit, or the admin
2012-07-04 14:24:26 +00:00
can use sysctl net.core.wmem_max. On BSD, Solaris changes are similar
to so\- rcvbuf.
.TP
2014-05-14 18:44:22 +00:00
.B so\-reuseport: \fI <yes or no>
If yes, then open dedicated listening sockets for incoming queries for each
thread and try to set the SO_REUSEPORT socket option on each socket. May
2018-09-10 16:32:55 +00:00
distribute incoming queries to threads more evenly. Default is yes.
On Linux it is supported in kernels >= 3.9. On other systems, FreeBSD, OSX
it may also work. You can enable it (on any platform and kernel),
2014-05-14 18:44:22 +00:00
it then attempts to open the port and passes the option if it was available
at compile time, if that works it is used, if it fails, it continues
silently (unless verbosity 3) without the option.
2019-06-30 15:01:11 +00:00
At extreme load it could be better to turn it off to distribute the queries
evenly, reported for Linux systems (4.4.x).
2014-05-14 18:44:22 +00:00
.TP
2015-09-17 15:21:27 +00:00
.B ip\-transparent: \fI <yes or no>
2022-02-17 22:47:14 +00:00
If yes, then use IP_TRANSPARENT socket option on sockets where Unbound
2015-09-17 15:21:27 +00:00
is listening for incoming traffic. Default no. Allows you to bind to
2018-05-12 11:56:52 +00:00
non\- local interfaces. For example for non\- existent IP addresses that
2015-09-17 15:21:27 +00:00
are going to exist later on, with host failover configuration. This is
a lot like interface\- automatic, but that one services all interfaces
2022-02-17 22:47:14 +00:00
and with this option you can select which (future) interfaces Unbound
provides service on. This option needs Unbound to be started with root
2018-05-12 11:56:38 +00:00
permissions on some systems. The option uses IP_BINDANY on FreeBSD systems
and SO_BINDANY on OpenBSD systems.
2015-09-17 15:21:27 +00:00
.TP
2016-09-03 15:08:13 +00:00
.B ip\-freebind: \fI <yes or no>
2022-02-17 22:47:14 +00:00
If yes, then use IP_FREEBIND socket option on sockets where Unbound
2016-09-03 15:08:13 +00:00
is listening to incoming traffic. Default no. Allows you to bind to
IP addresses that are nonlocal or do not exist, like when the network
2016-09-27 21:11:07 +00:00
interface or IP address is down. Exists only on Linux, where the similar
2016-09-03 15:08:13 +00:00
ip\- transparent option is also available.
.TP
2020-08-21 22:56:05 +00:00
.B ip-dscp: \fI <number>
The value of the Differentiated Services Codepoint (DSCP) in the
differentiated services field (DS) of the outgoing IP packet headers.
The field replaces the outdated IPv4 Type-Of-Service field and the
2023-01-13 23:52:47 +00:00
IPv6 traffic class field.
2020-08-21 22:56:05 +00:00
.TP
2012-07-04 14:24:26 +00:00
.B rrset\-cache\-size: \fI <number>
Number of bytes size of the RRset cache. Default is 4 megabytes.
A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes, megabytes
or gigabytes (1024*1024 bytes in a megabyte).
.TP
.B rrset\-cache\-slabs: \fI <number>
Number of slabs in the RRset cache. Slabs reduce lock contention by threads.
2018-05-12 11:54:35 +00:00
Must be set to a power of 2.
2012-07-04 14:24:26 +00:00
.TP
.B cache\-max\-ttl: \fI <seconds>
2018-05-12 11:54:35 +00:00
Time to live maximum for RRsets and messages in the cache. Default is
2019-02-06 12:31:02 +00:00
86400 seconds (1 day). When the TTL expires, the cache item has expired.
2012-07-04 14:24:26 +00:00
Can be set lower to force the resolver to query for data often, and not
2019-02-06 12:31:02 +00:00
trust (very large) TTL values. Downstream clients also see the lower TTL.
2012-07-04 14:24:26 +00:00
.TP
.B cache\-min\-ttl: \fI <seconds>
Time to live minimum for RRsets and messages in the cache. Default is 0.
2015-10-09 11:29:49 +00:00
If the minimum kicks in, the data is cached for longer than the domain
2012-07-04 14:24:26 +00:00
owner intended, and thus less queries are made to look up the data.
Zero makes sure the data in the cache is as the domain owner intended,
2018-05-12 11:54:35 +00:00
higher values, especially more than an hour or so, can lead to trouble as
2012-07-04 14:24:26 +00:00
the data in the cache does not match up with the actual data any more.
.TP
2015-09-17 15:21:27 +00:00
.B cache\-max\-negative\-ttl: \fI <seconds>
Time to live maximum for negative responses, these have a SOA in the
authority section that is limited in time. Default is 3600.
2018-05-12 11:56:38 +00:00
This applies to nxdomain and nodata answers.
2015-09-17 15:21:27 +00:00
.TP
2012-07-04 14:24:26 +00:00
.B infra\-host\-ttl: \fI <seconds>
2018-05-12 11:54:35 +00:00
Time to live for entries in the host cache. The host cache contains
2012-07-04 14:24:26 +00:00
roundtrip timing, lameness and EDNS support information. Default is 900.
.TP
.B infra\-cache\-slabs: \fI <number>
2018-05-12 11:54:35 +00:00
Number of slabs in the infrastructure cache. Slabs reduce lock contention
by threads. Must be set to a power of 2.
2012-07-04 14:24:26 +00:00
.TP
.B infra\-cache\-numhosts: \fI <number>
Number of hosts for which information is cached. Default is 10000.
.TP
2015-04-26 11:23:26 +00:00
.B infra\-cache\-min\-rtt: \fI <msec>
Lower limit for dynamic retransmit timeout calculation in infrastructure
cache. Default is 50 milliseconds. Increase this value if using forwarders
needing more time to do recursive name resolution.
.TP
2022-08-05 20:02:55 +00:00
.B infra\-cache\-max\-rtt: \fI <msec>
Upper limit for dynamic retransmit timeout calculation in infrastructure
cache. Default is 2 minutes.
.TP
2020-12-08 21:23:03 +00:00
.B infra\-keep\-probing: \fI <yes or no>
If enabled the server keeps probing hosts that are down, in the one probe
at a time regime. Default is no. Hosts that are down, eg. they did
not respond during the one probe at a time period, are marked as down and
it may take \fB infra\- host\- ttl\fR time to get probed again.
.TP
2016-09-27 21:11:07 +00:00
.B define\-tag: \fI <"list of tags">
Define the tags that can be used with local\- zone and access\- control.
Enclose the list between quotes ("") and put spaces between tags.
.TP
2012-07-04 14:24:26 +00:00
.B do\-ip4: \fI <yes or no>
Enable or disable whether ip4 queries are answered or issued. Default is yes.
.TP
.B do\-ip6: \fI <yes or no>
Enable or disable whether ip6 queries are answered or issued. Default is yes.
If disabled, queries are not answered on IPv6, and queries are not sent on
2015-01-02 17:31:36 +00:00
IPv6 to the internet nameservers. With this option you can disable the
2023-01-13 23:52:47 +00:00
IPv6 transport for sending DNS traffic, it does not impact the contents of
2015-01-02 17:31:36 +00:00
the DNS traffic, which may have ip4 and ip6 addresses in it.
2012-07-04 14:24:26 +00:00
.TP
2020-08-21 22:56:05 +00:00
.B prefer\-ip4: \fI <yes or no>
If enabled, prefer IPv4 transport for sending DNS queries to internet
nameservers. Default is no. Useful if the IPv6 netblock the server has,
the entire /64 of that is not owned by one operator and the reputation of
the netblock /64 is an issue, using IPv4 then uses the IPv4 filters that
the upstream servers have.
.TP
2016-09-27 21:11:07 +00:00
.B prefer\-ip6: \fI <yes or no>
If enabled, prefer IPv6 transport for sending DNS queries to internet
nameservers. Default is no.
.TP
2012-07-04 14:24:26 +00:00
.B do\-udp: \fI <yes or no>
Enable or disable whether UDP queries are answered or issued. Default is yes.
.TP
.B do\-tcp: \fI <yes or no>
Enable or disable whether TCP queries are answered or issued. Default is yes.
.TP
2016-03-05 19:18:07 +00:00
.B tcp\-mss: \fI <number>
Maximum segment size (MSS) of TCP socket on which the server responds
2018-05-12 11:54:35 +00:00
to queries. Value lower than common MSS on Ethernet
2016-03-05 19:18:07 +00:00
(1220 for example) will address path MTU problem.
Note that not all platform supports socket option to set MSS (TCP_MAXSEG).
Default is system default MSS determined by interface MTU and
negotiation between server and client.
.TP
.B outgoing\-tcp\-mss: \fI <number>
Maximum segment size (MSS) of TCP socket for outgoing queries
(from Unbound to other servers). Value lower than
common MSS on Ethernet (1220 for example) will address path MTU problem.
Note that not all platform supports socket option to set MSS (TCP_MAXSEG).
Default is system default MSS determined by interface MTU and
negotiation between Unbound and other servers.
.TP
2018-09-10 16:32:55 +00:00
.B tcp-idle-timeout: \fI <msec>\fR
The period Unbound will wait for a query on a TCP connection.
If this timeout expires Unbound closes the connection.
This option defaults to 30000 milliseconds.
When the number of free incoming TCP buffers falls below 50% of the
total number configured, the option value used is progressively
reduced, first to 1% of the configured value, then to 0.2% of the
configured value if the number of free buffers falls below 35% of the
total number configured, and finally to 0 if the number of free buffers
falls below 20% of the total number configured. A minimum timeout of
200 milliseconds is observed regardless of the option value used.
.TP
2021-08-16 23:55:17 +00:00
.B tcp-reuse-timeout: \fI <msec>\fR
The period Unbound will keep TCP persistent connections open to
authority servers. This option defaults to 60000 milliseconds.
.TP
.B max-reuse-tcp-queries: \fI <number>\fR
The maximum number of queries that can be sent on a persistent TCP
connection.
This option defaults to 200 queries.
.TP
.B tcp-auth-query-timeout: \fI <number>\fR
Timeout in milliseconds for TCP queries to auth servers.
This option defaults to 3000 milliseconds.
.TP
2018-09-10 16:32:55 +00:00
.B edns-tcp-keepalive: \fI <yes or no>\fR
Enable or disable EDNS TCP Keepalive. Default is no.
.TP
.B edns-tcp-keepalive-timeout: \fI <msec>\fR
The period Unbound will wait for a query on a TCP connection when
EDNS TCP Keepalive is active. If this timeout expires Unbound closes
the connection. If the client supports the EDNS TCP Keepalive option,
Unbound sends the timeout value to the client to encourage it to
close the connection before the server times out.
This option defaults to 120000 milliseconds.
When the number of free incoming TCP buffers falls below 50% of
the total number configured, the advertised timeout is progressively
reduced to 1% of the configured value, then to 0.2% of the configured
value if the number of free buffers falls below 35% of the total number
configured, and finally to 0 if the number of free buffers falls below
20% of the total number configured.
A minimum actual timeout of 200 milliseconds is observed regardless of the
advertised timeout.
.TP
2012-07-04 14:24:26 +00:00
.B tcp\-upstream: \fI <yes or no>
Enable or disable whether the upstream queries use TCP only for transport.
2021-12-03 05:35:06 +00:00
Default is no. Useful in tunneling scenarios. If set to no you can specify
TCP transport only for selected forward or stub zones using forward-tcp-upstream
or stub-tcp-upstream respectively.
2012-07-04 14:24:26 +00:00
.TP
2018-05-12 11:55:57 +00:00
.B udp\-upstream\-without\-downstream: \fI <yes or no>
Enable udp upstream even if do-udp is no. Default is no, and this does not
change anything. Useful for TLS service providers, that want no udp downstream
but use udp to fetch data upstream.
.TP
2018-05-12 11:56:38 +00:00
.B tls\-upstream: \fI <yes or no>
2018-05-12 11:56:52 +00:00
Enabled or disable whether the upstream queries use TLS only for transport.
Default is no. Useful in tunneling scenarios. The TLS contains plain DNS in
2018-05-12 11:54:35 +00:00
TCP wireformat. The other server must support this (see
2018-05-12 11:56:38 +00:00
\fB tls\- service\- key\fR ).
2022-06-08 14:43:13 +00:00
If you enable this, also configure a tls\- cert\- bundle or use tls\- win\- cert or
tls\- system\- cert to load CA certs, otherwise the connections cannot be
authenticated. This option enables TLS for all of them, but if you do not set
this you can configure TLS specifically for some forward zones with
forward\- tls\- upstream. And also with stub\- tls\- upstream.
2018-05-12 11:56:38 +00:00
.TP
.B ssl\-upstream: \fI <yes or no>
Alternate syntax for \fB tls\- upstream\fR . If both are present in the config
file the last is used.
2012-07-04 14:24:26 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B tls\-service\-key: \fI <file>
2020-10-27 15:09:16 +00:00
If enabled, the server provides DNS-over-TLS or DNS-over-HTTPS service on the
TCP ports marked implicitly or explicitly for these services with tls\- port or
https\- port. The file must contain the private key for the TLS session, the
public certificate is in the tls\- service\- pem file and it must also be
specified if tls\- service\- key is specified. The default is "", turned off.
Enabling or disabling this service requires a restart (a reload is not enough),
because the key is read while root permissions are held and before chroot (if any).
The ports enabled implicitly or explicitly via \fB tls\- port:\fR and
\fB https\- port:\fR do not provide normal DNS TCP service. Unbound needs to be
compiled with libnghttp2 in order to provide DNS-over-HTTPS.
2012-07-04 14:24:26 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B ssl\-service\-key: \fI <file>
Alternate syntax for \fB tls\- service\- key\fR .
.TP
.B tls\-service\-pem: \fI <file>
The public key certificate pem file for the tls service. Default is "",
2012-07-04 14:24:26 +00:00
turned off.
.TP
2018-05-12 11:56:38 +00:00
.B ssl\-service\-pem: \fI <file>
Alternate syntax for \fB tls\- service\- pem\fR .
.TP
.B tls\-port: \fI <number>
2018-05-12 11:56:52 +00:00
The port number on which to provide TCP TLS service, default 853, only
interfaces configured with that port number as @number get the TLS service.
2012-07-04 14:24:26 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B ssl\-port: \fI <number>
Alternate syntax for \fB tls\- port\fR .
.TP
.B tls\-cert\-bundle: \fI <file>
If null or "", no file is used. Set it to the certificate bundle file,
for example "/etc/pki/tls/certs/ca\- bundle.crt". These certificates are used
for authenticating connections made to outside peers. For example auth\- zone
2020-12-08 21:23:03 +00:00
urls, and also DNS over TLS connections. It is read at start up before
permission drop and chroot.
2018-05-12 11:56:38 +00:00
.TP
.B ssl\-cert\-bundle: \fI <file>
Alternate syntax for \fB tls\- cert\- bundle\fR .
.TP
2018-09-10 16:30:18 +00:00
.B tls\-win\-cert: \fI <yes or no>
Add the system certificates to the cert bundle certificates for authentication.
If no cert bundle, it uses only these certificates. Default is no.
On windows this option uses the certificates from the cert store. Use
2022-06-08 14:43:13 +00:00
the tls\- cert\- bundle option on other systems. On other systems, this option
enables the system certificates.
.TP
.B tls\-system\-cert: \fI <yes or no>
This the same setting as the tls\- win\- cert setting, under a different name.
Because it is not windows specific.
2018-09-10 16:30:18 +00:00
.TP
2018-09-10 16:31:49 +00:00
.B tls\-additional\-port: \fI <portnr>
List portnumbers as tls\- additional\- port, and when interfaces are defined,
2018-05-12 11:56:52 +00:00
eg. with the @port suffix, as this port number, they provide dns over TLS
service. Can list multiple, each on a new statement.
.TP
2019-02-06 12:31:02 +00:00
.B tls-session-ticket-keys: \fI <file>
If not "", lists files with 80 bytes of random contents that are used to
2022-02-17 22:47:14 +00:00
perform TLS session resumption for clients using the Unbound server.
2019-02-06 12:31:02 +00:00
These files contain the secret key for the TLS session tickets.
First key use to encrypt and decrypt TLS session tickets.
Other keys use to decrypt only. With this you can roll over to new keys,
by generating a new first file and allowing decrypt of the old file by
listing it after the first file for some time, after the wait clients are not
using the old key any more and the old key can be removed.
One way to create the file is dd if=/dev/random bs=1 count=80 of=ticket.dat
The first 16 bytes should be different from the old one if you create a second key, that is the name used to identify the key. Then there is 32 bytes random
data for an AES key and then 32 bytes random data for the HMAC key.
.TP
.B tls\-ciphers: \fI <string with cipher list>
Set the list of ciphers to allow when serving TLS. Use "" for defaults,
and that is the default.
.TP
.B tls\-ciphersuites: \fI <string with ciphersuites list>
Set the list of ciphersuites to allow when serving TLS. This is for newer
TLS 1.3 connections. Use "" for defaults, and that is the default.
.TP
2021-02-09 20:59:02 +00:00
.B pad\-responses: \fI <yes or no>
If enabled, TLS serviced queries that contained an EDNS Padding option will
cause responses padded to the closest multiple of the size specified in
\fB pad\- responses\- block\- size\fR .
Default is yes.
.TP
.B pad\-responses\-block\-size: \fI <number>
The block size with which to pad responses serviced over TLS. Only responses
to padded queries will be padded.
Default is 468.
.TP
.B pad\-queries: \fI <yes or no>
If enabled, all queries sent over TLS upstreams will be padded to the closest
multiple of the size specified in \fB pad\- queries\- block\- size\fR .
Default is yes.
.TP
.B pad\-queries\-block\-size: \fI <number>
The block size with which to pad queries sent over TLS upstreams.
Default is 128.
2021-08-16 23:55:17 +00:00
.TP
2020-08-21 22:56:05 +00:00
.B tls\-use\-sni: \fI <yes or no>
Enable or disable sending the SNI extension on TLS connections.
Default is yes.
Changing the value requires a reload.
.TP
2020-10-27 15:09:16 +00:00
.B https\-port: \fI <number>
The port number on which to provide DNS-over-HTTPS service, default 443, only
interfaces configured with that port number as @number get the HTTPS service.
.TP
.B http\-endpoint: \fI <endpoint string>
The HTTP endpoint to provide DNS-over-HTTPS service on. Default "/dns-query".
.TP
.B http\-max\-streams: \fI <number of streams>
Number used in the SETTINGS_MAX_CONCURRENT_STREAMS parameter in the HTTP/2
SETTINGS frame for DNS-over-HTTPS connections. Default 100.
.TP
.B http\-query\-buffer\-size: \fI <size in bytes>
Maximum number of bytes used for all HTTP/2 query buffers combined. These
buffers contain (partial) DNS queries waiting for request stream completion.
An RST_STREAM frame will be send to streams exceeding this limit. Default is 4
megabytes. A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes,
megabytes or gigabytes (1024*1024 bytes in a megabyte).
.TP
.B http\-response\-buffer\-size: \fI <size in bytes>
Maximum number of bytes used for all HTTP/2 response buffers combined. These
buffers contain DNS responses waiting to be written back to the clients.
An RST_STREAM frame will be send to streams exceeding this limit. Default is 4
megabytes. A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes,
megabytes or gigabytes (1024*1024 bytes in a megabyte).
.TP
.B http\-nodelay: \fI <yes or no>
Set TCP_NODELAY socket option on sockets used to provide DNS-over-HTTPS service.
Ignored if the option is not available. Default is yes.
.TP
2020-12-08 21:23:03 +00:00
.B http\-notls\-downstream: \fI <yes or no>
Disable use of TLS for the downstream DNS-over-HTTP connections. Useful for
local back end servers. Default is no.
.TP
2022-10-16 19:24:20 +00:00
.B proxy\-protocol\-port: \fI <portnr>
List port numbers as proxy\- protocol\- port, and when interfaces are defined,
eg. with the @port suffix, as this port number, they support and expect PROXYv2.
In this case the proxy address will only be used for the network communication
and initial ACL (check if the proxy itself is denied/refused by configuration).
The proxied address (if any) will then be used as the true client address and
will be used where applicable for logging, ACL, DNSTAP, RPZ and IP ratelimiting.
PROXYv2 is supported for UDP and TCP/TLS listening interfaces.
There is no support for PROXYv2 on a DoH or DNSCrypt listening interface.
Can list multiple, each on a new statement.
.TP
2018-05-12 11:49:30 +00:00
.B use\-systemd: \fI <yes or no>
Enable or disable systemd socket activation.
Default is no.
.TP
2012-07-04 14:24:26 +00:00
.B do\-daemonize: \fI <yes or no>
2022-02-17 22:47:14 +00:00
Enable or disable whether the Unbound server forks into the background as
a daemon. Set the value to \fI no\fR when Unbound runs as systemd service.
2018-05-12 11:49:30 +00:00
Default is yes.
2012-07-04 14:24:26 +00:00
.TP
2018-09-10 16:32:55 +00:00
.B tcp\-connection\-limit: \fI <IP netblock> <limit>
2018-10-09 19:42:34 +00:00
Allow up to \fI limit\fR simultaneous TCP connections from the given netblock.
2018-09-10 16:32:55 +00:00
When at the limit, further connections are accepted but closed immediately.
This option is experimental at this time.
.TP
2012-07-04 14:24:26 +00:00
.B access\-control: \fI <IP netblock> <action>
2018-05-12 11:54:35 +00:00
The netblock is given as an IP4 or IP6 address with /size appended for a
classless network block. The action can be \fI deny\fR , \fI refuse\fR ,
2018-09-10 16:30:18 +00:00
\fI allow\fR , \fI allow_setrd\fR , \fI allow_snoop\fR , \fI deny_non_local\fR or
\fI refuse_non_local\fR .
2022-10-16 19:24:20 +00:00
The most specific netblock match is used, if none match \fI refuse\fR is used.
2019-06-30 14:56:56 +00:00
The order of the access\- control statements therefore does not matter.
2012-07-04 14:24:26 +00:00
.IP
The action \fI deny\fR stops queries from hosts from that netblock.
.IP
2018-05-12 11:54:35 +00:00
The action \fI refuse\fR stops queries too, but sends a DNS rcode REFUSED
2012-07-04 14:24:26 +00:00
error message back.
.IP
2018-05-12 11:54:35 +00:00
The action \fI allow\fR gives access to clients from that netblock.
It gives only access for recursion clients (which is
2012-07-04 14:24:26 +00:00
what almost all clients need). Nonrecursive queries are refused.
.IP
2018-05-12 11:54:35 +00:00
The \fI allow\fR action does allow nonrecursive queries to access the
2012-07-04 14:24:26 +00:00
local\- data that is configured. The reason is that this does not involve
2022-02-17 22:47:14 +00:00
the Unbound server recursive lookup algorithm, and static data is served
2018-05-12 11:54:35 +00:00
in the reply. This supports normal operations where nonrecursive queries
are made for the authoritative data. For nonrecursive queries any replies
2012-07-04 14:24:26 +00:00
from the dynamic cache are refused.
.IP
2018-09-10 16:30:18 +00:00
The \fI allow_setrd\fR action ignores the recursion desired (RD) bit and
treats all requests as if the recursion desired bit is set. Note that this
behavior violates RFC 1034 which states that a name server should never perform
recursive service unless asked via the RD bit since this interferes with
trouble shooting of name servers and their databases. This prohibited behavior
may be useful if another DNS server must forward requests for specific
zones to a resolver DNS server, but only supports stub domains and
sends queries to the resolver DNS server with the RD bit cleared.
.IP
2018-05-12 11:54:35 +00:00
The action \fI allow_snoop\fR gives nonrecursive access too. This give
both recursive and non recursive access. The name \fI allow_snoop\fR refers
2012-07-04 14:24:26 +00:00
to cache snooping, a technique to use nonrecursive queries to examine
2018-05-12 11:54:35 +00:00
the cache contents (for malicious acts). However, nonrecursive queries can
also be a valuable debugging tool (when you want to examine the cache
2012-07-04 14:24:26 +00:00
contents). In that case use \fI allow_snoop\fR for your administration host.
.IP
By default only localhost is \fI allow\fR ed, the rest is \fI refuse\fR d.
2018-05-12 11:54:35 +00:00
The default is \fI refuse\fR d, because that is protocol\- friendly. The DNS
protocol is not designed to handle dropped packets due to policy, and
2012-07-04 14:24:26 +00:00
dropping may result in (possibly excessive) retried queries.
2014-05-14 18:44:22 +00:00
.IP
The deny_non_local and refuse_non_local settings are for hosts that are
only allowed to query for the authoritative local\- data, they are not
allowed full recursion but only the static data. With deny_non_local,
messages that are disallowed are dropped, with refuse_non_local they
receive error code REFUSED.
2012-07-04 14:24:26 +00:00
.TP
2016-09-27 21:11:07 +00:00
.B access\-control\-tag: \fI <IP netblock> <"list of tags">
Assign tags to access-control elements. Clients using this access control
element use localzones that are tagged with one of these tags. Tags must be
defined in \fI define\- tags\fR . Enclose list of tags in quotes ("") and put
spaces between tags. If access\- control\- tag is configured for a netblock that
does not have an access\- control, an access\- control element with action
\fI allow\fR is configured for this netblock.
.TP
.B access\-control\-tag\-action: \fI <IP netblock> <tag> <action>
Set action for particular tag for given access control element. If you have
multiple tag values, the tag used to lookup the action is the first tag match
between access\- control\- tag and local\- zone\- tag where "first" comes from the
order of the define-tag values.
.TP
.B access\-control\-tag\-data: \fI <IP netblock> <tag> <"resource record string">
Set redirect data for particular tag for given access control element.
.TP
2017-02-03 13:06:34 +00:00
.B access\-control\-view: \fI <IP netblock> <view name>
Set view for given access control element.
.TP
2022-10-16 19:24:20 +00:00
.B interface\-action: \fI <ip address or interface name [@port]> <action>
Similar to \fB access\- control:\fR but for interfaces.
.IP
The action is the same as the ones defined under \fB access\- control:\fR .
Interfaces are \fI refuse\fR d by default.
By default only localhost (the IP netblock, not the loopback interface) is
\fI allow\fR ed through the default \fB access\- control:\fR behavior.
.IP
Note that the interface needs to be already specified with \fB interface:\fR
and that any \fB access-control*:\fR setting overrides all \fB interface-*:\fR
settings for targeted clients.
.TP
.B interface\-tag: \fI <ip address or interface name [@port]> <"list of tags">
Similar to \fB access\- control-tag:\fR but for interfaces.
.IP
Note that the interface needs to be already specified with \fB interface:\fR
and that any \fB access-control*:\fR setting overrides all \fB interface-*:\fR
settings for targeted clients.
.TP
.B interface\-tag\-action: \fI <ip address or interface name [@port]> <tag> <action>
Similar to \fB access\- control-tag-action:\fR but for interfaces.
.IP
Note that the interface needs to be already specified with \fB interface:\fR
and that any \fB access-control*:\fR setting overrides all \fB interface-*:\fR
settings for targeted clients.
.TP
.B interface\-tag\-data: \fI <ip address or interface name [@port]> <tag> <"resource record string">
Similar to \fB access\- control-tag-data:\fR but for interfaces.
.IP
Note that the interface needs to be already specified with \fB interface:\fR
and that any \fB access-control*:\fR setting overrides all \fB interface-*:\fR
settings for targeted clients.
.TP
.B interface\-view: \fI <ip address or interface name [@port]> <view name>
Similar to \fB access\- control-view:\fR but for interfaces.
.IP
Note that the interface needs to be already specified with \fB interface:\fR
and that any \fB access-control*:\fR setting overrides all \fB interface-*:\fR
settings for targeted clients.
.TP
2012-07-04 14:24:26 +00:00
.B chroot: \fI <directory>
If chroot is enabled, you should pass the configfile (from the
commandline) as a full path from the original root. After the
2018-05-12 11:54:35 +00:00
chroot has been performed the now defunct portion of the config
file path is removed to be able to reread the config after a reload.
2012-07-04 14:24:26 +00:00
.IP
All other file paths (working dir, logfile, roothints, and
key files) can be specified in several ways:
as an absolute path relative to the new root,
as a relative path to the working directory, or
as an absolute path relative to the original root.
In the last case the path is adjusted to remove the unused portion.
.IP
The pidfile can be either a relative path to the working directory, or
an absolute path relative to the original root. It is written just prior
2018-05-12 11:54:35 +00:00
to chroot and dropping permissions. This allows the pidfile to be
2019-12-28 05:27:06 +00:00
/var/run/unbound.pid and the chroot to be /var/unbound, for example. Note that
Unbound is not able to remove the pidfile after termination when it is located
outside of the chroot directory.
2012-07-04 14:24:26 +00:00
.IP
2022-02-17 22:47:14 +00:00
Additionally, Unbound may need to access /dev/urandom (for entropy)
2012-07-04 14:24:26 +00:00
from inside the chroot.
.IP
2018-09-10 16:32:55 +00:00
If given a chroot is done to the given directory. By default chroot is
enabled and the default is "@UNBOUND_CHROOT_DIR@". If you give "" no
chroot is performed.
2012-07-04 14:24:26 +00:00
.TP
.B username: \fI <name>
If given, after binding the port the user privileges are dropped. Default is
2018-05-12 11:54:35 +00:00
"@UNBOUND_USERNAME@". If you give username: "" no user change is performed.
2012-07-04 14:24:26 +00:00
.IP
If this user is not capable of binding the
port, reloads (by signal HUP) will still retain the opened ports.
2018-05-12 11:54:35 +00:00
If you change the port number in the config file, and that new port number
2012-07-04 14:24:26 +00:00
requires privileges, then a reload will fail; a restart is needed.
.TP
.B directory: \fI <directory>
Sets the working directory for the program. Default is "@UNBOUND_RUN_DIR@".
2015-12-12 22:18:57 +00:00
On Windows the string "%EXECUTABLE%" tries to change to the directory
that unbound.exe resides in.
2016-09-27 21:11:07 +00:00
If you give a server: directory: dir before include: file statements
then those includes can be relative to the working directory.
2012-07-04 14:24:26 +00:00
.TP
.B logfile: \fI <filename>
If "" is given, logging goes to stderr, or nowhere once daemonized.
2018-05-12 11:54:35 +00:00
The logfile is appended to, in the following format:
2012-07-04 14:24:26 +00:00
.nf
2018-05-12 11:54:35 +00:00
[seconds since 1970] unbound[pid:tid]: type: message.
2012-07-04 14:24:26 +00:00
.fi
If this option is given, the use\- syslog is option is set to "no".
2018-05-12 11:54:35 +00:00
The logfile is reopened (for append) when the config file is reread, on
2012-07-04 14:24:26 +00:00
SIGHUP.
.TP
.B use\-syslog: \fI <yes or no>
2022-02-17 22:47:14 +00:00
Sets Unbound to send log messages to the syslogd, using
2018-05-12 11:54:35 +00:00
\fI syslog\fR (3).
2012-07-04 14:24:26 +00:00
The log facility LOG_DAEMON is used, with identity "unbound".
The logfile setting is overridden when use\- syslog is turned on.
The default is to log to syslog.
.TP
2017-02-03 13:06:34 +00:00
.B log\-identity: \fI <string>
If "" is given (default), then the name of the executable, usually "unbound"
is used to report to the log. Enter a string to override it
with that, which is useful on systems that run more than one instance of
2022-02-17 22:47:14 +00:00
Unbound, with different configurations, so that the logs can be easily
2017-02-03 13:06:34 +00:00
distinguished against.
.TP
2012-07-04 14:24:26 +00:00
.B log\-time\-ascii: \fI <yes or no>
Sets logfile lines to use a timestamp in UTC ascii. Default is no, which
prints the seconds since 1970 in brackets. No effect if using syslog, in
that case syslog formats the timestamp printed into the log files.
.TP
.B log\-queries: \fI <yes or no>
Prints one line per query to the log, with the log timestamp and IP address,
name, type and class. Default is no. Note that it takes time to print these
lines which makes the server (significantly) slower. Odd (nonprintable)
characters in names are printed as '?'.
.TP
2018-05-12 11:49:30 +00:00
.B log\-replies: \fI <yes or no>
Prints one line per reply to the log, with the log timestamp and IP address,
name, type, class, return code, time to resolve, from cache and response size.
Default is no. Note that it takes time to print these
lines which makes the server (significantly) slower. Odd (nonprintable)
characters in names are printed as '?'.
.TP
2019-02-06 12:31:02 +00:00
.B log\-tag\-queryreply: \fI <yes or no>
Prints the word 'query' and 'reply' with log\- queries and log\- replies.
This makes filtering logs easier. The default is off (for backwards
compatibility).
.TP
2018-09-10 16:32:55 +00:00
.B log\-local\-actions: \fI <yes or no>
Print log lines to inform about local zone actions. These lines are like the
local\- zone type inform prints out, but they are also printed for the other
types of local zones.
.TP
.B log\-servfail: \fI <yes or no>
Print log lines that say why queries return SERVFAIL to clients.
This is separate from the verbosity debug logs, much smaller, and printed
at the error level, not the info level of debug info from verbosity.
.TP
2012-07-04 14:24:26 +00:00
.B pidfile: \fI <filename>
2018-05-12 11:54:35 +00:00
The process id is written to the file. Default is "@UNBOUND_PIDFILE@".
2012-07-04 14:24:26 +00:00
So,
.nf
2018-05-12 11:54:35 +00:00
kill \- HUP `cat @UNBOUND_PIDFILE@`
2012-07-04 14:24:26 +00:00
.fi
triggers a reload,
.nf
2018-05-12 11:54:35 +00:00
kill \- TERM `cat @UNBOUND_PIDFILE@`
2012-07-04 14:24:26 +00:00
.fi
gracefully terminates.
.TP
.B root\-hints: \fI <filename>
Read the root hints from this file. Default is nothing, using builtin hints
2018-05-12 11:54:35 +00:00
for the IN class. The file has the format of zone files, with root
2012-07-04 14:24:26 +00:00
nameserver names and addresses only. The default may become outdated,
when servers change, therefore it is good practice to use a root\- hints file.
.TP
.B hide\-identity: \fI <yes or no>
If enabled id.server and hostname.bind queries are refused.
.TP
.B identity: \fI <string>
Set the identity to report. If set to "", the default, then the hostname
of the server is returned.
.TP
.B hide\-version: \fI <yes or no>
If enabled version.server and version.bind queries are refused.
.TP
.B version: \fI <string>
Set the version to report. If set to "", the default, then the package
version is returned.
.TP
2021-08-16 23:55:17 +00:00
.B hide\-http\-user\-agent: \fI <yes or no>
If enabled the HTTP header User-Agent is not set. Use with caution as some
webserver configurations may reject HTTP requests lacking this header.
If needed, it is better to explicitly set the
.B http\-user\-agent
below.
.TP
.B http\-user\-agent: \fI <string>
Set the HTTP User-Agent header for outgoing HTTP requests. If set to "",
the default, then the package name and version are used.
.TP
2021-02-09 20:59:02 +00:00
.B nsid:\fR <string>
Add the specified nsid to the EDNS section of the answer when queried
with an NSID EDNS enabled packet. As a sequence of hex characters or
with ascii_ prefix and then an ascii string.
.TP
2018-05-12 11:53:39 +00:00
.B hide\-trustanchor: \fI <yes or no>
If enabled trustanchor.unbound queries are refused.
.TP
2012-07-04 14:24:26 +00:00
.B target\-fetch\-policy: \fI <"list of numbers">
2022-02-17 22:47:14 +00:00
Set the target fetch policy used by Unbound to determine if it should fetch
2012-07-04 14:24:26 +00:00
nameserver target addresses opportunistically. The policy is described per
2018-05-12 11:54:35 +00:00
dependency depth.
2012-07-04 14:24:26 +00:00
.IP
The number of values determines the maximum dependency depth
2022-02-17 22:47:14 +00:00
that Unbound will pursue in answering a query.
2012-07-04 14:24:26 +00:00
A value of \- 1 means to fetch all targets opportunistically for that dependency
depth. A value of 0 means to fetch on demand only. A positive value fetches
2018-05-12 11:54:35 +00:00
that many targets opportunistically.
2012-07-04 14:24:26 +00:00
.IP
Enclose the list between quotes ("") and put spaces between numbers.
The default is "3 2 1 0 0". Setting all zeroes, "0 0 0 0 0" gives behaviour
2018-05-12 11:54:35 +00:00
closer to that of BIND 9, while setting "\- 1 \- 1 \- 1 \- 1 \- 1" gives behaviour
2012-07-04 14:24:26 +00:00
rumoured to be closer to that of BIND 8.
.TP
.B harden\-short\-bufsize: \fI <yes or no>
2021-02-09 20:59:02 +00:00
Very small EDNS buffer sizes from queries are ignored. Default is on, as
described in the standard.
2012-07-04 14:24:26 +00:00
.TP
.B harden\-large\-queries: \fI <yes or no>
Very large queries are ignored. Default is off, since it is legal protocol
wise to send these, and could be necessary for operation if TSIG or EDNS
payload is very large.
.TP
.B harden\-glue: \fI <yes or no>
2019-12-28 05:27:06 +00:00
Will trust glue only if it is within the servers authority. Default is yes.
2012-07-04 14:24:26 +00:00
.TP
.B harden\-dnssec\-stripped: \fI <yes or no>
Require DNSSEC data for trust\- anchored zones, if such data is absent,
the zone becomes bogus. If turned off, and no DNSSEC data is received
2018-05-12 11:54:35 +00:00
(or the DNSKEY data fails to validate), then the zone is made insecure,
this behaves like there is no trust anchor. You could turn this off if
you are sometimes behind an intrusive firewall (of some sort) that
removes DNSSEC data from packets, or a zone changes from signed to
unsigned to badly signed often. If turned off you run the risk of a
2019-12-28 05:27:06 +00:00
downgrade attack that disables security for a zone. Default is yes.
2012-07-04 14:24:26 +00:00
.TP
.B harden\-below\-nxdomain: \fI <yes or no>
2017-02-03 13:06:34 +00:00
From RFC 8020 (with title "NXDOMAIN: There Really Is Nothing Underneath"),
returns nxdomain to queries for a name
2012-07-04 14:24:26 +00:00
below another name that is already known to be nxdomain. DNSSEC mandates
noerror for empty nonterminals, hence this is possible. Very old software
might return nxdomain for empty nonterminals (that usually happen for reverse
IP address lookups), and thus may be incompatible with this. To try to avoid
this only DNSSEC-secure nxdomains are used, because the old software does not
2019-12-28 05:27:06 +00:00
have DNSSEC. Default is yes.
2017-02-03 13:06:34 +00:00
The nxdomain must be secure, this means nsec3 with optout is insufficient.
2012-07-04 14:24:26 +00:00
.TP
.B harden\-referral\-path: \fI <yes or no>
Harden the referral path by performing additional queries for
infrastructure data. Validates the replies if trust anchors are configured
and the zones are signed. This enforces DNSSEC validation on nameserver
2018-05-12 11:54:35 +00:00
NS sets and the nameserver addresses that are encountered on the referral
2012-07-04 14:24:26 +00:00
path to the answer.
2018-09-10 16:30:18 +00:00
Default no, because it burdens the authority servers, and it is
2012-07-04 14:24:26 +00:00
not RFC standard, and could lead to performance problems because of the
extra query load that is generated. Experimental option.
If you enable it consider adding more numbers after the target\- fetch\- policy
to increase the max depth that is checked to.
.TP
2015-09-17 15:21:27 +00:00
.B harden\-algo\-downgrade: \fI <yes or no>
Harden against algorithm downgrade when multiple algorithms are
advertised in the DS record. If no, allows the weakest algorithm to
2015-10-09 11:29:49 +00:00
validate the zone. Default is no. Zone signers must produce zones
2015-09-17 15:21:27 +00:00
that allow this feature to work, but sometimes they do not, and turning
this option off avoids that validation failure.
.TP
2012-07-04 14:24:26 +00:00
.B use\-caps\-for\-id: \fI <yes or no>
Use 0x20\- encoded random bits in the query to foil spoof attempts.
2018-05-12 11:54:35 +00:00
This perturbs the lowercase and uppercase of query names sent to
authority servers and checks if the reply still has the correct casing.
Disabled by default.
2012-07-04 14:24:26 +00:00
This feature is an experimental implementation of draft dns\- 0x20.
.TP
2020-10-27 15:09:16 +00:00
.B caps\-exempt: \fI <domain>
Exempt the domain so that it does not receive caps\- for\- id perturbed
2015-09-17 15:21:27 +00:00
queries. For domains that do not support 0x20 and also fail with fallback
because they keep sending different answers, like some load balancers.
Can be given multiple times, for different domains.
.TP
2020-10-27 15:09:16 +00:00
.B caps\-whitelist: \fI <yes or no>
Alternate syntax for \fB caps\- exempt\fR .
.TP
2015-12-12 22:18:57 +00:00
.B qname\-minimisation: \fI <yes or no>
Send minimum amount of information to upstream servers to enhance privacy.
2019-06-30 15:01:11 +00:00
Only send minimum required labels of the QNAME and set QTYPE to A when
2017-02-03 13:06:34 +00:00
possible. Best effort approach; full QNAME and original QTYPE will be sent when
upstream replies with a RCODE other than NOERROR, except when receiving
2018-09-10 16:30:18 +00:00
NXDOMAIN from a DNSSEC signed zone. Default is yes.
2017-02-03 13:06:34 +00:00
.TP
.B qname\-minimisation\-strict: \fI <yes or no>
QNAME minimisation in strict mode. Do not fall-back to sending full QNAME to
potentially broken nameservers. A lot of domains will not be resolvable when
this option in enabled. Only use if you know what you are doing.
2020-08-21 22:56:05 +00:00
This option only has effect when qname-minimisation is enabled. Default is no.
2015-12-12 22:18:57 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B aggressive\-nsec: \fI <yes or no>
Aggressive NSEC uses the DNSSEC NSEC chain to synthesize NXDOMAIN
and other denials, using information from previous NXDOMAINs answers.
2022-02-17 22:47:14 +00:00
Default is yes. It helps to reduce the query rate towards targets that get
2018-05-12 11:56:52 +00:00
a very high nonexistent name lookup rate.
2018-05-12 11:56:38 +00:00
.TP
2012-07-04 14:24:26 +00:00
.B private\-address: \fI <IP address or subnet>
Give IPv4 of IPv6 addresses or classless subnets. These are addresses
2015-12-12 22:18:57 +00:00
on your private network, and are not allowed to be returned for
public internet names. Any occurrence of such addresses are removed
from DNS answers. Additionally, the DNSSEC validator may mark the
answers bogus. This protects against so\- called DNS Rebinding, where
a user browser is turned into a network proxy, allowing remote access
through the browser to other parts of your private network. Some names
can be allowed to contain your private addresses, by default all the
\fB local\- data\fR that you configured is allowed to, and you can specify
additional names using \fB private\- domain\fR . No private addresses are
enabled by default. We consider to enable this for the RFC1918 private
IP address space by default in later releases. That would enable private
addresses for 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 169.254.0.0/16
fd00::/8 and fe80::/10, since the RFC standards say these addresses
should not be visible on the public internet. Turning on 127.0.0.0/8
would hinder many spamblocklists as they use that. Adding ::ffff:0:0/96
stops IPv4-mapped IPv6 addresses from bypassing the filter.
2012-07-04 14:24:26 +00:00
.TP
.B private\-domain: \fI <domain name>
Allow this domain, and all its subdomains to contain private addresses.
2018-05-12 11:54:35 +00:00
Give multiple times to allow multiple domain names to contain private
2012-07-04 14:24:26 +00:00
addresses. Default is none.
.TP
.B unwanted\-reply\-threshold: \fI <number>
If set, a total number of unwanted replies is kept track of in every thread.
When it reaches the threshold, a defensive action is taken and a warning
is printed to the log. The defensive action is to clear the rrset and
message caches, hopefully flushing away any poison. A value of 10 million
is suggested. Default is 0 (turned off).
.TP
.B do\-not\-query\-address: \fI <IP address>
2018-05-12 11:54:35 +00:00
Do not query the given IP address. Can be IP4 or IP6. Append /num to
2012-07-04 14:24:26 +00:00
indicate a classless delegation netblock, for example like
10.2.3.4/24 or 2001::11/64.
.TP
.B do\-not\-query\-localhost: \fI <yes or no>
If yes, localhost is added to the do\- not\- query\- address entries, both
IP6 ::1 and IP4 127.0.0.1/8. If no, then localhost can be used to send
queries to. Default is yes.
.TP
.B prefetch: \fI <yes or no>
If yes, message cache elements are prefetched before they expire to
keep the cache up to date. Default is no. Turning it on gives about
10 percent more traffic and load on the machine, but popular items do
not expire from the cache.
.TP
2019-02-06 12:31:02 +00:00
.B prefetch\-key: \fI <yes or no>
2012-07-04 14:24:26 +00:00
If yes, fetch the DNSKEYs earlier in the validation process, when a DS
record is encountered. This lowers the latency of requests. It does use
a little more CPU. Also if the cache is set to 0, it is no use. Default is no.
.TP
2019-02-06 12:31:02 +00:00
.B deny\-any: \fI <yes or no>
If yes, deny queries of type ANY with an empty response. Default is no.
2022-02-17 22:47:14 +00:00
If disabled, Unbound responds with a short list of resource records if some
2019-02-06 12:31:02 +00:00
can be found in the cache and makes the upstream type ANY query if there
are none.
.TP
.B rrset\-roundrobin: \fI <yes or no>
2012-07-04 14:24:26 +00:00
If yes, Unbound rotates RRSet order in response (the random number is taken
2020-08-21 22:56:05 +00:00
from the query ID, for speed and thread safety). Default is yes.
2012-07-04 14:24:26 +00:00
.TP
.B minimal-responses: \fI <yes or no>
2021-08-16 23:55:17 +00:00
If yes, Unbound does not insert authority/additional sections into response
2012-07-04 14:24:26 +00:00
messages when those sections are not required. This reduces response
size significantly, and may avoid TCP fallback for some responses.
2018-09-10 16:32:55 +00:00
This may cause a slight speedup. The default is yes, even though the DNS
2012-07-04 14:24:26 +00:00
protocol RFCs mandate these sections, and the additional content could
2018-09-10 16:32:55 +00:00
be of use and save roundtrips for clients. Because they are not used,
and the saved roundtrips are easier saved with prefetch, whilst this is
faster.
2012-07-04 14:24:26 +00:00
.TP
2016-09-03 15:08:13 +00:00
.B disable-dnssec-lame-check: \fI <yes or no>
If true, disables the DNSSEC lameness check in the iterator. This check
sees if RRSIGs are present in the answer, when dnssec is expected,
and retries another authority if RRSIGs are unexpectedly missing.
The validator will insist in RRSIGs for DNSSEC signed domains regardless
of this setting, if a trust anchor is loaded.
.TP
2012-07-04 14:24:26 +00:00
.B module\-config: \fI <"module names">
Module configuration, a list of module names separated by spaces, surround
2021-08-16 23:55:17 +00:00
the string with quotes (""). The modules can be \fI respip\fR ,
\fI validator\fR , or \fI iterator\fR (and possibly more, see below).
Setting this to just "\fI iterator\fR " will result in a non\- validating
server.
Setting this to "\fI validator iterator\fR " will turn on DNSSEC validation.
The ordering of the modules is significant, the order decides the
order of processing.
You must also set \fI trust\- anchors\fR for validation to be useful.
Adding \fI respip\fR to the front will cause RPZ processing to be done on
all queries.
The default is "\fI validator iterator\fR ".
.IP
When the server is built with
EDNS client subnet support the default is "\fI subnetcache validator
iterator\fR ".
2019-06-30 14:56:56 +00:00
Most modules that need to be listed here have to be listed at the beginning
2021-08-16 23:55:17 +00:00
of the line. The subnetcachedb module has to be listed just before
the iterator.
2019-06-30 14:56:56 +00:00
The python module can be listed in different places, it then processes the
2020-08-21 22:56:05 +00:00
output of the module it is just before. The dynlib module can be listed pretty
much anywhere, it is only a very thin wrapper that allows dynamic libraries to
run in its place.
2012-07-04 14:24:26 +00:00
.TP
.B trust\-anchor\-file: \fI <filename>
File with trusted keys for validation. Both DS and DNSKEY entries can appear
in the file. The format of the file is the standard DNS Zone file format.
Default is "", or no trust anchor file.
.TP
.B auto\-trust\-anchor\-file: \fI <filename>
File with trust anchor for one zone, which is tracked with RFC5011 probes.
2019-12-28 05:27:06 +00:00
The probes are run several times per month, thus the machine must be online
2012-07-04 14:24:26 +00:00
frequently. The initial file can be one with contents as described in
\fB trust\- anchor\- file\fR . The file is written to when the anchor is updated,
2022-02-17 22:47:14 +00:00
so the Unbound user must have write permission. Write permission to the file,
2016-09-03 15:08:13 +00:00
but also to the directory it is in (to create a temporary file, which is
2018-05-12 11:53:39 +00:00
necessary to deal with filesystem full events), it must also be inside the
chroot (if that is used).
2012-07-04 14:24:26 +00:00
.TP
.B trust\-anchor: \fI <"Resource Record">
A DS or DNSKEY RR for a key to use for validation. Multiple entries can be
given to specify multiple trusted keys, in addition to the trust\- anchor\- files.
The resource record is entered in the same format as 'dig' or 'drill' prints
them, the same format as in the zone file. Has to be on a single line, with
2018-05-12 11:54:35 +00:00
"" around it. A TTL can be specified for ease of cut and paste, but is ignored.
2012-07-04 14:24:26 +00:00
A class can be specified, but class IN is default.
.TP
.B trusted\-keys\-file: \fI <filename>
File with trusted keys for validation. Specify more than one file
with several entries, one file per entry. Like \fB trust\- anchor\- file\fR
2018-05-12 11:54:35 +00:00
but has a different file format. Format is BIND\- 9 style format,
2012-07-04 14:24:26 +00:00
the trusted\- keys { name flag proto algo "key"; }; clauses are read.
It is possible to use wildcards with this statement, the wildcard is
expanded on start and on reload.
.TP
2018-05-12 11:54:35 +00:00
.B trust\-anchor\-signaling: \fI <yes or no>
2019-12-28 05:27:06 +00:00
Send RFC8145 key tag query after trust anchor priming. Default is yes.
2018-05-12 11:54:35 +00:00
.TP
2018-05-12 11:56:52 +00:00
.B root\-key\-sentinel: \fI <yes or no>
2019-12-28 05:27:06 +00:00
Root key trust anchor sentinel. Default is yes.
2018-05-12 11:56:52 +00:00
.TP
2012-07-04 14:24:26 +00:00
.B domain\-insecure: \fI <domain name>
Sets domain name to be insecure, DNSSEC chain of trust is ignored towards
the domain name. So a trust anchor above the domain name can not make the
domain secure with a DS record, such a DS record is then ignored.
2020-10-27 15:09:16 +00:00
Can be given multiple times
2012-07-04 14:24:26 +00:00
to specify multiple domains that are treated as if unsigned. If you set
2018-05-12 11:54:35 +00:00
trust anchors for the domain they override this setting (and the domain
2012-07-04 14:24:26 +00:00
is secured).
.IP
This can be useful if you want to make sure a trust anchor for external
2018-05-12 11:54:35 +00:00
lookups does not affect an (unsigned) internal domain. A DS record
2012-07-04 14:24:26 +00:00
externally can create validation failures for that internal domain.
.TP
.B val\-override\-date: \fI <rrsig\-style date spec>
Default is "" or "0", which disables this debugging feature. If enabled by
giving a RRSIG style date, that date is used for verifying RRSIG inception
2018-05-12 11:54:35 +00:00
and expiration dates, instead of the current date. Do not set this unless
2012-07-04 14:24:26 +00:00
you are debugging signature inception and expiration. The value \- 1 ignores
the date altogether, useful for some special applications.
.TP
.B val\-sig\-skew\-min: \fI <seconds>
Minimum number of seconds of clock skew to apply to validated signatures.
A value of 10% of the signature lifetime (expiration \- inception) is
used, capped by this setting. Default is 3600 (1 hour) which allows for
daylight savings differences. Lower this value for more strict checking
of short lived signatures.
.TP
.B val\-sig\-skew\-max: \fI <seconds>
Maximum number of seconds of clock skew to apply to validated signatures.
A value of 10% of the signature lifetime (expiration \- inception)
is used, capped by this setting. Default is 86400 (24 hours) which
allows for timezone setting problems in stable domains. Setting both
min and max very low disables the clock skew allowances. Setting both
min and max very high makes the validator check the signature timestamps
less strictly.
.TP
2021-08-16 23:55:17 +00:00
.B val\-max\-restart: \fI <number>
The maximum number the validator should restart validation with
another authority in case of failed validation. Default is 5.
.TP
2012-07-04 14:24:26 +00:00
.B val\-bogus\-ttl: \fI <number>
The time to live for bogus data. This is data that has failed validation;
due to invalid signatures or other checks. The TTL from that data cannot be
trusted, and this value is used instead. The value is in seconds, default 60.
The time interval prevents repeated revalidation of bogus data.
.TP
.B val\-clean\-additional: \fI <yes or no>
Instruct the validator to remove data from the additional section of secure
messages that are not signed properly. Messages that are insecure, bogus,
indeterminate or unchecked are not affected. Default is yes. Use this setting
2018-05-12 11:54:35 +00:00
to protect the users that rely on this validator for authentication from
2015-12-12 22:18:57 +00:00
potentially bad data in the additional section.
2012-07-04 14:24:26 +00:00
.TP
.B val\-log\-level: \fI <number>
Have the validator print validation failures to the log. Regardless of
the verbosity setting. Default is 0, off. At 1, for every user query
that fails a line is printed to the logs. This way you can monitor what
happens with validation. Use a diagnosis tool, such as dig or drill,
to find out why validation is failing for these queries. At 2, not only
2022-02-17 22:47:14 +00:00
the query that failed is printed but also the reason why Unbound thought
2012-07-04 14:24:26 +00:00
it was wrong and which server sent the faulty data.
.TP
.B val\-permissive\-mode: \fI <yes or no>
Instruct the validator to mark bogus messages as indeterminate. The security
checks are performed, but if the result is bogus (failed security), the
2018-05-12 11:54:35 +00:00
reply is not withheld from the client with SERVFAIL as usual. The client
receives the bogus data. For messages that are found to be secure the AD bit
2012-07-04 14:24:26 +00:00
is set in replies. Also logging is performed as for full validation.
2018-05-12 11:54:35 +00:00
The default value is "no".
2012-07-04 14:24:26 +00:00
.TP
.B ignore\-cd\-flag: \fI <yes or no>
2022-02-17 22:47:14 +00:00
Instruct Unbound to ignore the CD flag from clients and refuse to
2012-07-04 14:24:26 +00:00
return bogus answers to them. Thus, the CD (Checking Disabled) flag
does not disable checking any more. This is useful if legacy (w2008)
servers that set the CD flag but cannot validate DNSSEC themselves are
2022-02-17 22:47:14 +00:00
the clients, and then Unbound provides them with DNSSEC protection.
2012-07-04 14:24:26 +00:00
The default value is "no".
.TP
2017-02-03 13:06:34 +00:00
.B serve\-expired: \fI <yes or no>
2022-02-17 22:47:14 +00:00
If enabled, Unbound attempts to serve old responses from cache with a
2020-05-21 05:01:52 +00:00
TTL of \fB serve\- expired\- reply\- ttl\fR in the response without waiting for the
actual resolution to finish. The actual resolution answer ends up in the cache
later on. Default is "no".
2017-02-03 13:06:34 +00:00
.TP
2018-09-10 16:32:55 +00:00
.B serve\-expired\-ttl: \fI <seconds>
Limit serving of expired responses to configured seconds after expiration. 0
2020-05-21 05:01:52 +00:00
disables the limit. This option only applies when \fB serve\- expired\fR is
2020-10-27 15:09:16 +00:00
enabled. A suggested value per RFC 8767 is between
2020-05-21 05:01:52 +00:00
86400 (1 day) and 259200 (3 days). The default is 0.
2018-09-10 16:32:55 +00:00
.TP
.B serve\-expired\-ttl\-reset: \fI <yes or no>
Set the TTL of expired records to the \fB serve\- expired\- ttl\fR value after a
2020-05-21 05:01:52 +00:00
failed attempt to retrieve the record from upstream. This makes sure that the
expired records will be served as long as there are queries for it. Default is
2018-09-10 16:32:55 +00:00
"no".
.TP
2020-05-21 05:01:52 +00:00
.B serve\-expired\-reply\-ttl: \fI <seconds>
TTL value to use when replying with expired data. If
\fB serve\- expired\- client\- timeout\fR is also used then it is RECOMMENDED to
2020-10-27 15:09:16 +00:00
use 30 as the value (RFC 8767). The default is 30.
2020-05-21 05:01:52 +00:00
.TP
.B serve\-expired\-client\-timeout: \fI <msec>
Time in milliseconds before replying to the client with expired data. This
essentially enables the serve-stale behavior as specified in
2020-10-27 15:09:16 +00:00
RFC 8767 that first tries to resolve before immediately
2020-05-21 05:01:52 +00:00
responding with expired data. A recommended value per
2020-10-27 15:09:16 +00:00
RFC 8767 is 1800. Setting this to 0 will disable this
2020-05-21 05:01:52 +00:00
behavior. Default is 0.
.TP
2021-02-09 20:59:02 +00:00
.B serve\-original\-ttl: \fI <yes or no>
2022-02-17 22:47:14 +00:00
If enabled, Unbound will always return the original TTL as received from
2021-02-09 20:59:02 +00:00
the upstream name server rather than the decrementing TTL as
2022-02-17 22:47:14 +00:00
stored in the cache. This feature may be useful if Unbound serves as a
front-end to a hidden authoritative name server. Enabling this feature does
not impact cache expiry, it only changes the TTL Unbound embeds in responses to
2021-02-09 20:59:02 +00:00
queries. Note that enabling this feature implicitly disables enforcement of
2022-02-17 22:47:14 +00:00
the configured minimum and maximum TTL, as it is assumed users who enable this
feature do not want Unbound to change the TTL obtained from an upstream server.
2021-02-09 20:59:02 +00:00
Thus, the values set using \fB cache\- min\- ttl\fR and \fB cache\- max\- ttl\fR are
ignored.
Default is "no".
.TP
2012-07-04 14:24:26 +00:00
.B val\-nsec3\-keysize\-iterations: \fI <"list of values">
List of keysize and iteration count values, separated by spaces, surrounded
2021-08-16 23:55:17 +00:00
by quotes. Default is "1024 150 2048 150 4096 150". This determines the
2012-07-04 14:24:26 +00:00
maximum allowed NSEC3 iteration count before a message is simply marked
insecure instead of performing the many hashing iterations. The list must
2018-05-12 11:54:35 +00:00
be in ascending order and have at least one entry. If you set it to
2012-07-04 14:24:26 +00:00
"1024 65535" there is no restriction to NSEC3 iteration values.
This table must be kept short; a very long list could cause slower operation.
.TP
2021-08-16 23:55:17 +00:00
.B zonemd\-permissive\-mode: \fI <yes or no>
If enabled the ZONEMD verification failures are only logged and do not cause
the zone to be blocked and only return servfail. Useful for testing out
if it works, or if the operator only wants to be notified of a problem without
disrupting service. Default is no.
.TP
2012-07-04 14:24:26 +00:00
.B add\-holddown: \fI <seconds>
Instruct the \fB auto\- trust\- anchor\- file\fR probe mechanism for RFC5011
autotrust updates to add new trust anchors only after they have been
visible for this time. Default is 30 days as per the RFC.
.TP
.B del\-holddown: \fI <seconds>
Instruct the \fB auto\- trust\- anchor\- file\fR probe mechanism for RFC5011
autotrust updates to remove revoked trust anchors after they have been
kept in the revoked list for this long. Default is 30 days as per
the RFC.
.TP
.B keep\-missing: \fI <seconds>
Instruct the \fB auto\- trust\- anchor\- file\fR probe mechanism for RFC5011
autotrust updates to remove missing trust anchors after they have been
unseen for this long. This cleans up the state file if the target zone
does not perform trust anchor revocation, so this makes the auto probe
mechanism work with zones that perform regular (non\- 5011) rollovers.
The default is 366 days. The value 0 does not remove missing anchors,
as per the RFC.
.TP
2015-10-09 11:29:49 +00:00
.B permit\-small\-holddown: \fI <yes or no>
Debug option that allows the autotrust 5011 rollover timers to assume
very small values. Default is no.
.TP
2012-07-04 14:24:26 +00:00
.B key\-cache\-size: \fI <number>
Number of bytes size of the key cache. Default is 4 megabytes.
A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes, megabytes
or gigabytes (1024*1024 bytes in a megabyte).
.TP
.B key\-cache\-slabs: \fI <number>
Number of slabs in the key cache. Slabs reduce lock contention by threads.
2018-05-12 11:54:35 +00:00
Must be set to a power of 2. Setting (close) to the number of cpus is a
2012-07-04 14:24:26 +00:00
reasonable guess.
.TP
.B neg\-cache\-size: \fI <number>
Number of bytes size of the aggressive negative cache. Default is 1 megabyte.
A plain number is in bytes, append 'k', 'm' or 'g' for kilobytes, megabytes
or gigabytes (1024*1024 bytes in a megabyte).
.TP
2018-09-10 16:32:55 +00:00
.B unblock\-lan\-zones: \fI <yes or no>
2015-01-02 17:31:36 +00:00
Default is disabled. If enabled, then for private address space,
2022-02-17 22:47:14 +00:00
the reverse lookups are no longer filtered. This allows Unbound when
2015-01-02 17:31:36 +00:00
running as dns service on a host where it provides service for that host,
to put out all of the queries for the 'lan' upstream. When enabled,
only localhost, 127.0.0.1 reverse and ::1 reverse zones are configured
2022-02-17 22:47:14 +00:00
with default local zones. Disable the option when Unbound is running
2015-01-02 17:31:36 +00:00
as a (DHCP-) DNS network resolver for a group of machines, where such
lookups should be filtered (RFC compliance), this also stops potential
data leakage about the local network to the upstream DNS servers.
.TP
2018-09-10 16:32:55 +00:00
.B insecure\-lan\-zones: \fI <yes or no>
2016-02-11 17:25:12 +00:00
Default is disabled. If enabled, then reverse lookups in private
address space are not validated. This is usually required whenever
\fI unblock\- lan\- zones\fR is used.
.TP
2012-07-04 14:24:26 +00:00
.B local\-zone: \fI <zone> <type>
Configure a local zone. The type determines the answer to give if
there is no match from local\- data. The types are deny, refuse, static,
2015-09-17 15:21:27 +00:00
transparent, redirect, nodefault, typetransparent, inform, inform_deny,
2021-02-09 20:59:02 +00:00
inform_redirect, always_transparent, always_refuse, always_nxdomain, always_null, noview,
2015-09-17 15:21:27 +00:00
and are explained below. After that the default settings are listed. Use
local\- data: to enter data into the local zone. Answers for local zones
are authoritative DNS answers. By default the zones are class IN.
2012-07-04 14:24:26 +00:00
.IP
If you need more complicated authoritative data, with referrals, wildcards,
CNAME/DNAME support, or DNSSEC authoritative service, setup a stub\- zone for
2022-06-08 14:43:13 +00:00
it as detailed in the stub zone section below. A stub\- zone can be used to
have unbound send queries to another server, an authoritative server, to
fetch the information. With a forward\- zone, unbound sends queries to a server
that is a recursive server to fetch the information. With an auth\- zone a
zone can be loaded from file and used, it can be used like a local\- zone
for users downstream, or the auth\- zone information can be used to fetch
information from when resolving like it is an upstream server. The
forward\- zone and auth\- zone options are described in their sections below.
If you want to perform filtering of the information that the users can fetch,
the local\- zone and local\- data statements allow for this, but also the
rpz functionality can be used, described in the RPZ section.
2012-07-04 14:24:26 +00:00
.TP 10
\h '5'\fI deny\fR
Do not send an answer, drop the query.
If there is a match from local data, the query is answered.
.TP 10
\h '5'\fI refuse\fR
Send an error message reply, with rcode REFUSED.
If there is a match from local data, the query is answered.
.TP 10
\h '5'\fI static\fR
If there is a match from local data, the query is answered.
Otherwise, the query is answered with nodata or nxdomain.
For a negative answer a SOA is included in the answer if present
as local\- data for the zone apex domain.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI transparent\fR
2012-07-04 14:24:26 +00:00
If there is a match from local data, the query is answered.
Otherwise if the query has a different name, the query is resolved normally.
If the query is for a name given in localdata but no such type of data is
given in localdata, then a noerror nodata answer is returned.
If no local\- zone is given local\- data causes a transparent zone
to be created by default.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI typetransparent\fR
2012-07-04 14:24:26 +00:00
If there is a match from local data, the query is answered. If the query
is for a different name, or for the same name but for a different type,
the query is resolved normally. So, similar to transparent but types
that are not listed in local data are resolved normally, so if an A record
is in the local data that does not cause a nodata reply for AAAA queries.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI redirect\fR
2012-07-04 14:24:26 +00:00
The query is answered from the local data for the zone name.
There may be no local data beneath the zone name.
This answers queries for the zone, and all subdomains of the zone
with the local data for the zone.
It can be used to redirect a domain to return a different address record
2018-05-12 11:54:35 +00:00
to the end user, with
local\- zone: "example.com." redirect and
2012-07-04 14:24:26 +00:00
local\- data: "example.com. A 127.0.0.1"
queries for www.example.com and www.foo.example.com are redirected, so
that users with web browsers cannot access sites with suffix example.com.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI inform\fR
2017-02-03 13:06:34 +00:00
The query is answered normally, same as transparent. The client IP
address (@portnumber) is printed to the logfile. The log message is:
timestamp, unbound-pid, info: zonename inform IP@port queryname type
class. This option can be used for normal resolution, but machines
looking up infected names are logged, eg. to run antivirus on them.
2015-04-26 11:23:26 +00:00
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI inform_deny\fR
2015-09-17 15:21:27 +00:00
The query is dropped, like 'deny', and logged, like 'inform'. Ie. find
infected machines without answering the queries.
.TP 10
2019-06-30 14:56:56 +00:00
\h '5'\fI inform_redirect\fR
The query is redirected, like 'redirect', and logged, like 'inform'.
Ie. answer queries with fixed data and also log the machines that ask.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI always_transparent\fR
2016-09-27 21:11:07 +00:00
Like transparent, but ignores local data and resolves normally.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI always_refuse\fR
2016-09-27 21:11:07 +00:00
Like refuse, but ignores local data and refuses the query.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI always_nxdomain\fR
2016-09-27 21:11:07 +00:00
Like static, but ignores local data and returns nxdomain for the query.
.TP 10
2021-02-09 20:59:02 +00:00
\h '5'\fI always_nodata\fR
Like static, but ignores local data and returns nodata for the query.
.TP 10
\h '5'\fI always_deny\fR
Like deny, but ignores local data and drops the query.
.TP 10
\h '5'\fI always_null\fR
Always returns 0.0.0.0 or ::0 for every name in the zone. Like redirect
with zero data for A and AAAA. Ignores local data in the zone. Used for
some block lists.
.TP 10
2018-05-12 11:56:38 +00:00
\h '5'\fI noview\fR
Breaks out of that view and moves towards the global local zones for answer
to the query. If the view first is no, it'll resolve normally. If view first
is enabled, it'll break perform that step and check the global answers.
For when the view has view specific overrides but some zone has to be
2022-02-17 22:47:14 +00:00
answered from global local zone contents.
2018-05-12 11:56:38 +00:00
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI nodefault\fR
2012-07-04 14:24:26 +00:00
Used to turn off default contents for AS112 zones. The other types
2018-05-12 11:54:35 +00:00
also turn off default contents for the zone. The 'nodefault' option
has no other effect than turning off default contents for the
2015-10-09 11:29:49 +00:00
given zone. Use \fI nodefault\fR if you use exactly that zone, if you want to
use a subzone, use \fI transparent\fR .
2012-07-04 14:24:26 +00:00
.P
2021-12-03 05:35:06 +00:00
The default zones are localhost, reverse 127.0.0.1 and ::1, the home.arpa,
the onion, test, invalid and the AS112 zones. The AS112 zones are reverse
DNS zones for private use and reserved IP addresses for which the servers
on the internet cannot provide correct answers. They are configured by
default to give nxdomain (no reverse information) answers. The defaults
can be turned off by specifying your own local\- zone of that name, or
using the 'nodefault' type. Below is a list of the default zone contents.
2012-07-04 14:24:26 +00:00
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI localhost\fR
2012-07-04 14:24:26 +00:00
The IP4 and IP6 localhost information is given. NS and SOA records are provided
for completeness and to satisfy some DNS update tools. Default content:
.nf
2018-05-12 11:55:17 +00:00
local\- zone: "localhost." redirect
2012-07-04 14:24:26 +00:00
local\- data: "localhost. 10800 IN NS localhost."
2018-05-12 11:54:35 +00:00
local\- data: "localhost. 10800 IN
2012-07-04 14:24:26 +00:00
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
local\- data: "localhost. 10800 IN A 127.0.0.1"
local\- data: "localhost. 10800 IN AAAA ::1"
.fi
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI reverse IPv4 loopback\fR
2012-07-04 14:24:26 +00:00
Default content:
.nf
local\- zone: "127.in\- addr.arpa." static
local\- data: "127.in\- addr.arpa. 10800 IN NS localhost."
2018-05-12 11:54:35 +00:00
local\- data: "127.in\- addr.arpa. 10800 IN
2012-07-04 14:24:26 +00:00
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
2018-05-12 11:54:35 +00:00
local\- data: "1.0.0.127.in\- addr.arpa. 10800 IN
2012-07-04 14:24:26 +00:00
PTR localhost."
.fi
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI reverse IPv6 loopback\fR
2012-07-04 14:24:26 +00:00
Default content:
.nf
local\- zone: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." static
local\- data: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
2018-05-12 11:54:35 +00:00
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa. 10800 IN
2012-07-04 14:24:26 +00:00
NS localhost."
local\- data: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
2018-05-12 11:54:35 +00:00
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa. 10800 IN
2012-07-04 14:24:26 +00:00
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
local\- data: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
2018-05-12 11:54:35 +00:00
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa. 10800 IN
2012-07-04 14:24:26 +00:00
PTR localhost."
.fi
.TP 10
2021-12-03 05:35:06 +00:00
\h '5'\fI home.arpa (RFC 8375)\fR
Default content:
.nf
local\- zone: "home.arpa." static
local\- data: "home.arpa. 10800 IN NS localhost."
local\- data: "home.arpa. 10800 IN
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
.fi
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI onion (RFC 7686)\fR
2016-03-05 19:18:07 +00:00
Default content:
.nf
local\- zone: "onion." static
local\- data: "onion. 10800 IN NS localhost."
2018-05-12 11:54:35 +00:00
local\- data: "onion. 10800 IN
2016-03-05 19:18:07 +00:00
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
.fi
.TP 10
2020-05-21 05:01:52 +00:00
\h '5'\fI test (RFC 6761)\fR
2018-05-12 11:55:17 +00:00
Default content:
.nf
local\- zone: "test." static
local\- data: "test. 10800 IN NS localhost."
local\- data: "test. 10800 IN
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
.fi
.TP 10
2020-05-21 05:01:52 +00:00
\h '5'\fI invalid (RFC 6761)\fR
2018-05-12 11:55:17 +00:00
Default content:
.nf
local\- zone: "invalid." static
local\- data: "invalid. 10800 IN NS localhost."
local\- data: "invalid. 10800 IN
SOA localhost. nobody.invalid. 1 3600 1200 604800 10800"
.fi
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI reverse RFC1918 local use zones\fR
Reverse data for zones 10.in\- addr.arpa, 16.172.in\- addr.arpa to
2012-07-04 14:24:26 +00:00
31.172.in\- addr.arpa, 168.192.in\- addr.arpa.
2018-05-12 11:54:35 +00:00
The \fB local\- zone:\fR is set static and as \fB local\- data:\fR SOA and NS
2012-07-04 14:24:26 +00:00
records are provided.
.TP 10
2018-05-12 11:54:35 +00:00
\h '5'\fI reverse RFC3330 IP4 this, link\- local, testnet and broadcast\fR
Reverse data for zones 0.in\- addr.arpa, 254.169.in\- addr.arpa,
2012-07-04 14:24:26 +00:00
2.0.192.in\- addr.arpa (TEST NET 1), 100.51.198.in\- addr.arpa (TEST NET 2),
113.0.203.in\- addr.arpa (TEST NET 3), 255.255.255.255.in\- addr.arpa.
2015-01-02 17:31:36 +00:00
And from 64.100.in\- addr.arpa to 127.100.in\- addr.arpa (Shared Address Space).
2012-07-04 14:24:26 +00:00
.TP 10
\h '5'\fI reverse RFC4291 IP6 unspecified\fR
2018-05-12 11:54:35 +00:00
Reverse data for zone
2012-07-04 14:24:26 +00:00
.nf
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa.
.fi
.TP 10
\h '5'\fI reverse RFC4193 IPv6 Locally Assigned Local Addresses\fR
Reverse data for zone D.F.ip6.arpa.
.TP 10
\h '5'\fI reverse RFC4291 IPv6 Link Local Addresses\fR
Reverse data for zones 8.E.F.ip6.arpa to B.E.F.ip6.arpa.
.TP 10
\h '5'\fI reverse IPv6 Example Prefix\fR
Reverse data for zone 8.B.D.0.1.0.0.2.ip6.arpa. This zone is used for
tutorials and examples. You can remove the block on this zone with:
.nf
local\- zone: 8.B.D.0.1.0.0.2.ip6.arpa. nodefault
.fi
You can also selectively unblock a part of the zone by making that part
transparent with a local\- zone statement.
This also works with the other default zones.
. \" End of local-zone listing.
.TP 5
.B local\-data: \fI "<resource record string>"
Configure local data, which is served in reply to queries for it.
2018-05-12 11:54:35 +00:00
The query has to match exactly unless you configure the local\- zone as
2012-07-04 14:24:26 +00:00
redirect. If not matched exactly, the local\- zone type determines
further processing. If local\- data is configured that is not a subdomain of
2018-05-12 11:54:35 +00:00
a local\- zone, a transparent local\- zone is configured.
For record types such as TXT, use single quotes, as in
2012-07-04 14:24:26 +00:00
local\- data: 'example. TXT "text"'.
.IP
If you need more complicated authoritative data, with referrals, wildcards,
CNAME/DNAME support, or DNSSEC authoritative service, setup a stub\- zone for
it as detailed in the stub zone section below.
.TP 5
.B local\-data\-ptr: \fI "IPaddr name"
Configure local data shorthand for a PTR record with the reversed IPv4 or
IPv6 address and the host name. For example "192.0.2.4 www.example.com".
TTL can be inserted like this: "2001:DB8::4 7200 www.example.com"
2015-09-17 15:21:27 +00:00
.TP 5
2016-09-27 21:11:07 +00:00
.B local\-zone\-tag: \fI <zone> <"list of tags">
Assign tags to localzones. Tagged localzones will only be applied when the
used access-control element has a matching tag. Tags must be defined in
\fI define\- tags\fR . Enclose list of tags in quotes ("") and put spaces between
2019-06-30 14:56:56 +00:00
tags. When there are multiple tags it checks if the intersection of the
list of tags for the query and local\- zone\- tag is non-empty.
2016-09-27 21:11:07 +00:00
.TP 5
.B local\-zone\-override: \fI <zone> <IP netblock> <type>
2018-05-12 11:54:35 +00:00
Override the localzone type for queries from addresses matching netblock.
2016-09-27 21:11:07 +00:00
Use this localzone type, regardless the type configured for the local-zone
(both tagged and untagged) and regardless the type configured using
access\- control\- tag\- action.
.TP 5
2021-08-16 23:55:17 +00:00
.B response\-ip: \fI <IP-netblock> <action>
This requires use of the "respip" module.
.IP
If the IP address in an AAAA or A RR in the answer section of a
response matches the specified IP netblock, the specified action will
apply.
\fI <action>\fR has generally the same semantics as that for
\fI access-control-tag-action\fR , but there are some exceptions.
.IP
Actions for \fI response-ip\fR are different from those for
\fI local-zone\fR in that in case of the former there is no point of
such conditions as "the query matches it but there is no local data".
Because of this difference, the semantics of \fI response-ip\fR actions
are modified or simplified as follows: The \fI static, refuse,
transparent, typetransparent,\fR and \fI nodefault\fR actions are
invalid for \fI response-ip\fR .
Using any of these will cause the configuration to be rejected as
faulty. The \fI deny\fR action is non-conditional, i.e. it always
results in dropping the corresponding query.
The resolution result before applying the deny action is still cached
and can be used for other queries.
.TP 5
.B response-ip-data: \fI <IP-netblock> <"resource record string">
This requires use of the "respip" module.
.IP
This specifies the action data for \fI response-ip\fR with action being
to redirect as specified by "\fI resource record string\fR ". "Resource
record string" is similar to that of \fI access-control-tag-action\fR ,
but it must be of either AAAA, A or CNAME types.
2023-01-13 23:52:47 +00:00
If the IP-netblock is an IPv6/IPv4 prefix, the record
2021-08-16 23:55:17 +00:00
must be AAAA/A respectively, unless it is a CNAME (which can be used
for both versions of IP netblocks). If it is CNAME there must not be
more than one \fI response-ip-data\fR for the same IP-netblock.
Also, CNAME and other types of records must not coexist for the same
IP-netblock, following the normal rules for CNAME records.
The textual domain name for the CNAME does not have to be explicitly
terminated with a dot ("."); the root name is assumed to be the origin
for the name.
.TP 5
.B response-ip-tag: \fI <IP-netblock> <"list of tags">
This requires use of the "respip" module.
.IP
Assign tags to response IP-netblocks. If the IP address in an AAAA or
A RR in the answer section of a response matches the specified
IP-netblock, the specified tags are assigned to the IP address.
Then, if an \fI access-control-tag\fR is defined for the client and it
includes one of the tags for the response IP, the corresponding
\fI access-control-tag-action\fR will apply.
Tag matching rule is the same as that for \fI access-control-tag\fR and
\fI local-zones\fR .
Unlike \fI local-zone-tag\fR , \fI response-ip-tag\fR can be defined for
an IP-netblock even if no \fI response-ip\fR is defined for that
netblock.
If multiple \fI response-ip-tag\fR options are specified for the same
IP-netblock in different statements, all but the first will be
ignored.
However, this will not be flagged as a configuration error, but the
result is probably not what was intended.
.IP
Actions specified in an
\fI access-control-tag-action\fR that has a matching tag with
\fI response-ip-tag\fR can be those that are "invalid" for
\fI response-ip\fR listed above, since \fI access-control-tag-action\fR s
can be shared with local zones.
For these actions, if they behave differently depending on whether
local data exists or not in case of local zones, the behavior for
\fI response-ip-data\fR will generally result in NOERROR/NODATA instead
of NXDOMAIN, since the \fI response-ip\fR data are inherently type
specific, and non-existence of data does not indicate anything about
the existence or non-existence of the qname itself.
For example, if the matching tag action is \fI static\fR but there is
no data for the corresponding \fI response-ip\fR configuration, then
the result will be NOERROR/NODATA.
The only case where NXDOMAIN is returned is when an
\fI always_nxdomain\fR action applies.
.TP 5
2015-09-17 15:21:27 +00:00
.B ratelimit: \fI <number or 0 >
Enable ratelimiting of queries sent to nameserver for performing recursion.
If 0, the default, it is disabled. This option is experimental at this time.
The ratelimit is in queries per second that are allowed. More queries are
turned away with an error (servfail). This stops recursive floods, eg. random
query names, but not spoofed reflection floods. Cached responses are not
ratelimited by this setting. The zone of the query is determined by examining
the nameservers for it, the zone name is used to keep track of the rate.
For example, 1000 may be a suitable value to stop the server from being
2022-02-17 22:47:14 +00:00
overloaded with random names, and keeps Unbound from sending traffic to the
nameservers for those zones. Configured forwarders are excluded from
ratelimiting.
2015-09-17 15:21:27 +00:00
.TP 5
.B ratelimit\-size: \fI <memory size>
Give the size of the data structure in which the current ongoing rates are
kept track in. Default 4m. In bytes or use m(mega), k(kilo), g(giga).
The ratelimit structure is small, so this data structure likely does
not need to be large.
.TP 5
.B ratelimit\-slabs: \fI <number>
Give power of 2 number of slabs, this is used to reduce lock contention
in the ratelimit tracking data structure. Close to the number of cpus is
a fairly good setting.
.TP 5
.B ratelimit\-factor: \fI <number>
Set the amount of queries to rate limit when the limit is exceeded.
If set to 0, all queries are dropped for domains where the limit is
exceeded. If set to another value, 1 in that number is allowed through
to complete. Default is 10, allowing 1/10 traffic to flow normally.
This can make ordinary queries complete (if repeatedly queried for),
2015-12-12 22:18:57 +00:00
and enter the cache, whilst also mitigating the traffic flow by the
2015-09-17 15:21:27 +00:00
factor given.
.TP 5
2022-02-17 22:47:14 +00:00
.B ratelimit\-backoff: \fI <yes or no>
If enabled, the ratelimit is treated as a hard failure instead of the default
maximum allowed constant rate. When the limit is reached, traffic is
ratelimited and demand continues to be kept track of for a 2 second rate
window. No traffic is allowed, except for ratelimit\- factor, until demand
decreases below the configured ratelimit for a 2 second rate window. Useful to
set ratelimit to a suspicious rate to aggressively limit unusually high
traffic. Default is off.
.TP 5
2018-05-12 11:54:35 +00:00
.B ratelimit\-for\-domain: \fI <domain> <number qps or 0 >
2015-09-17 15:21:27 +00:00
Override the global ratelimit for an exact match domain name with the listed
number. You can give this for any number of names. For example, for
a top\- level\- domain you may want to have a higher limit than other names.
2018-05-12 11:54:35 +00:00
A value of 0 will disable ratelimiting for that domain.
2015-09-17 15:21:27 +00:00
.TP 5
2018-05-12 11:54:35 +00:00
.B ratelimit\-below\-domain: \fI <domain> <number qps or 0 >
2015-09-17 15:21:27 +00:00
Override the global ratelimit for a domain name that ends in this name.
You can give this multiple times, it then describes different settings
in different parts of the namespace. The closest matching suffix is used
to determine the qps limit. The rate for the exact matching domain name
is not changed, use ratelimit\- for\- domain to set that, you might want
to use different settings for a top\- level\- domain and subdomains.
2018-05-12 11:54:35 +00:00
A value of 0 will disable ratelimiting for domain names that end in this name.
2018-05-12 11:49:30 +00:00
.TP 5
.B ip\-ratelimit: \fI <number or 0 >
2022-02-17 22:47:14 +00:00
Enable global ratelimiting of queries accepted per IP address.
2018-05-12 11:49:30 +00:00
If 0, the default, it is disabled. This option is experimental at this time.
The ratelimit is in queries per second that are allowed. More queries are
completely dropped and will not receive a reply, SERVFAIL or otherwise.
IP ratelimiting happens before looking in the cache. This may be useful for
mitigating amplification attacks.
.TP 5
.B ip\-ratelimit\-size: \fI <memory size>
Give the size of the data structure in which the current ongoing rates are
kept track in. Default 4m. In bytes or use m(mega), k(kilo), g(giga).
The ip ratelimit structure is small, so this data structure likely does
not need to be large.
.TP 5
.B ip\-ratelimit\-slabs: \fI <number>
Give power of 2 number of slabs, this is used to reduce lock contention
in the ip ratelimit tracking data structure. Close to the number of cpus is
a fairly good setting.
.TP 5
.B ip\-ratelimit\-factor: \fI <number>
Set the amount of queries to rate limit when the limit is exceeded.
If set to 0, all queries are dropped for addresses where the limit is
exceeded. If set to another value, 1 in that number is allowed through
to complete. Default is 10, allowing 1/10 traffic to flow normally.
This can make ordinary queries complete (if repeatedly queried for),
and enter the cache, whilst also mitigating the traffic flow by the
factor given.
2018-05-12 11:56:52 +00:00
.TP 5
2022-02-17 22:47:14 +00:00
.B ip\-ratelimit\-backoff: \fI <yes or no>
If enabled, the ratelimit is treated as a hard failure instead of the default
maximum allowed constant rate. When the limit is reached, traffic is
ratelimited and demand continues to be kept track of for a 2 second rate
window. No traffic is allowed, except for ip\- ratelimit\- factor, until demand
decreases below the configured ratelimit for a 2 second rate window. Useful to
set ip\- ratelimit to a suspicious rate to aggressively limit unusually high
traffic. Default is off.
.TP 5
2021-12-03 05:35:06 +00:00
.B outbound\-msg\-retry: \fI <number>
2022-08-05 20:02:55 +00:00
The number of retries, per upstream nameserver in a delegation, that Unbound
will attempt in case a throwaway response is received.
No response (timeout) contributes to the retry counter.
If a forward/stub zone is used, this is the number of retries per nameserver in
the zone.
Default is 5.
2021-12-03 05:35:06 +00:00
.TP 5
2023-01-13 23:52:47 +00:00
.B max\-sent\-count: \fI <number>
Hard limit on the number of outgoing queries Unbound will make while resolving
a name, making sure large NS sets do not loop.
Results in SERVFAIL when reached.
It resets on query restarts (e.g., CNAME) and referrals.
Default is 32.
.TP 5
.B max\-query\-restarts: \fI <number>
Hard limit on the number of times Unbound is allowed to restart a query upon
encountering a CNAME record.
Results in SERVFAIL when reached.
Changing this value needs caution as it can allow long CNAME chains to be
accepted, where Unbound needs to verify (resolve) each link individually.
Default is 11.
.TP 5
2019-02-06 12:31:02 +00:00
.B fast\-server\-permil: \fI <number>
Specify how many times out of 1000 to pick from the set of fastest servers.
0 turns the feature off. A value of 900 would pick from the fastest
servers 90 percent of the time, and would perform normal exploration of random
servers for the remaining time. When prefetch is enabled (or serve\- expired),
such prefetches are not sped up, because there is no one waiting for it, and it
presents a good moment to perform server exploration. The
\fB fast\- server\- num\fR option can be used to specify the size of the fastest
servers set. The default for fast\- server\- permil is 0.
2018-05-12 11:56:52 +00:00
.TP 5
2019-02-06 12:31:02 +00:00
.B fast\-server\-num: \fI <number>
Set the number of servers that should be used for fast server selection. Only
use the fastest specified number of servers with the fast\- server\- permil
option, that turns this on or off. The default is to use the fastest 3 servers.
2020-10-27 15:09:16 +00:00
.TP 5
2020-12-08 21:23:03 +00:00
.B edns\-client\-string: \fI <IP netblock> <string>
Include an EDNS0 option containing configured ascii string in queries with
destination address matching the configured IP netblock. This configuration
option can be used multiple times. The most specific match will be used.
2020-10-27 15:09:16 +00:00
.TP 5
2020-12-08 21:23:03 +00:00
.B edns\-client\-string\-opcode: \fI <opcode>
EDNS0 option code for the \fI edns\- client\- string\fR option, from 0 to 65535.
A value from the `Reserved for Local/Experimental` range (65001-65534) should
be used. Default is 65001.
2022-06-08 14:43:13 +00:00
.TP 5
.B ede: \fI <yes or no>
If enabled, Unbound will respond with Extended DNS Error codes (RFC8914).
These EDEs attach informative error messages to a response for various
errors. Default is "no".
When the \fB val-log-level\fR option is also set to \fB 2\fR , responses with
Extended DNS Errors concerning DNSSEC failures that are not served from cache,
will also contain a descriptive text message about the reason for the failure.
2023-01-13 23:52:47 +00:00
.TP 5
2022-06-08 14:43:13 +00:00
.B ede\-serve\-expired: \fI <yes or no>
If enabled, Unbound will attach an Extended DNS Error (RFC8914) Code 3 - Stale
Answer as EDNS0 option to the expired response. Note that this will not attach
the EDE code without setting the global \fB ede\fR option to "yes" as well.
Default is "no".
2012-07-04 14:24:26 +00:00
.SS "Remote Control Options"
In the
.B remote\-control:
clause are the declarations for the remote control facility. If this is
enabled, the \fI unbound\- control\fR (8) utility can be used to send
2022-02-17 22:47:14 +00:00
commands to the running Unbound server. The server uses these clauses
2018-05-12 11:56:52 +00:00
to setup TLSv1 security for the connection. The
2012-07-04 14:24:26 +00:00
\fI unbound\- control\fR (8) utility also reads the \fB remote\- control\fR
section for options. To setup the correct self\- signed certificates use the
\fI unbound\- control\- setup\fR (8) utility.
.TP 5
2015-01-05 14:55:52 +00:00
.B control\-enable: \fI <yes or no>
2012-07-04 14:24:26 +00:00
The option is used to enable remote control, default is "no".
If turned off, the server does not listen for control commands.
.TP 5
2022-10-16 19:24:20 +00:00
.B control\-interface: \fI <ip address or interface name or path>
2015-01-05 14:55:52 +00:00
Give IPv4 or IPv6 addresses or local socket path to listen on for
control commands.
2022-10-16 19:24:20 +00:00
If an interface name is used instead of an ip address, the list of ip addresses
on that interface are used.
2012-07-04 14:24:26 +00:00
By default localhost (127.0.0.1 and ::1) is listened to.
Use 0.0.0.0 and ::0 to listen to all interfaces.
2015-01-05 14:55:52 +00:00
If you change this and permissions have been dropped, you must restart
the server for the change to take effect.
2018-09-10 16:31:49 +00:00
.IP
2022-06-08 14:43:13 +00:00
If you set it to an absolute path, a unix domain socket is used. This socket
2018-09-10 16:31:49 +00:00
does not use the certificates and keys, so those files need not be present.
2022-02-17 22:47:14 +00:00
To restrict access, Unbound sets permissions on the file to the user and
2018-09-10 16:31:49 +00:00
group that is configured, the access bits are set to allow the group members
to access the control socket file. Put users that need to access the socket
in the that group. To restrict access further, create a directory to put
the control socket in and restrict access to that directory.
2012-07-04 14:24:26 +00:00
.TP 5
2015-01-05 14:55:52 +00:00
.B control\-port: \fI <port number>
The port number to listen on for IPv4 or IPv6 control interfaces,
default is 8953.
If you change this and permissions have been dropped, you must restart
the server for the change to take effect.
2012-07-04 14:24:26 +00:00
.TP 5
2015-01-12 07:24:01 +00:00
.B control\-use\-cert: \fI <yes or no>
2018-09-10 16:31:49 +00:00
For localhost control-interface you can disable the use of TLS by setting
this option to "no", default is "yes". For local sockets, TLS is disabled
and the value of this option is ignored.
2015-01-05 14:55:52 +00:00
.TP 5
.B server\-key\-file: \fI <private key file>
2012-07-04 14:24:26 +00:00
Path to the server private key, by default unbound_server.key.
This file is generated by the \fI unbound\- control\- setup\fR utility.
2022-02-17 22:47:14 +00:00
This file is used by the Unbound server, but not by \fI unbound\- control\fR .
2012-07-04 14:24:26 +00:00
.TP 5
2015-01-05 14:55:52 +00:00
.B server\-cert\-file: \fI <certificate file.pem>
2012-07-04 14:24:26 +00:00
Path to the server self signed certificate, by default unbound_server.pem.
This file is generated by the \fI unbound\- control\- setup\fR utility.
2022-02-17 22:47:14 +00:00
This file is used by the Unbound server, and also by \fI unbound\- control\fR .
2012-07-04 14:24:26 +00:00
.TP 5
2015-01-05 14:55:52 +00:00
.B control\-key\-file: \fI <private key file>
2012-07-04 14:24:26 +00:00
Path to the control client private key, by default unbound_control.key.
This file is generated by the \fI unbound\- control\- setup\fR utility.
This file is used by \fI unbound\- control\fR .
.TP 5
2015-01-05 14:55:52 +00:00
.B control\-cert\-file: \fI <certificate file.pem>
2012-07-04 14:24:26 +00:00
Path to the control client certificate, by default unbound_control.pem.
This certificate has to be signed with the server certificate.
This file is generated by the \fI unbound\- control\- setup\fR utility.
This file is used by \fI unbound\- control\fR .
.SS "Stub Zone Options"
.LP
There may be multiple
.B stub\-zone:
clauses. Each with a name: and zero or more hostnames or IP addresses.
For the stub zone this list of nameservers is used. Class IN is assumed.
2022-02-17 22:47:14 +00:00
The servers should be authority servers, not recursors; Unbound performs
2012-07-04 14:24:26 +00:00
the recursive processing itself for stub zones.
.P
The stub zone can be used to configure authoritative data to be used
by the resolver that cannot be accessed using the public internet servers.
2018-05-12 11:54:35 +00:00
This is useful for company\- local data or private zones. Setup an
authoritative server on a different host (or different port). Enter a config
2022-02-17 22:47:14 +00:00
entry for Unbound with
2012-07-04 14:24:26 +00:00
.B stub\-addr:
2018-05-12 11:54:35 +00:00
<ip address of host[@port]>.
2022-02-17 22:47:14 +00:00
The Unbound resolver can then access the data, without referring to the
2018-05-12 11:54:35 +00:00
public internet for it.
2012-07-04 14:24:26 +00:00
.P
2018-05-12 11:54:35 +00:00
This setup allows DNSSEC signed zones to be served by that
2012-07-04 14:24:26 +00:00
authoritative server, in which case a trusted key entry with the public key
2022-02-17 22:47:14 +00:00
can be put in config, so that Unbound can validate the data and set the AD
2018-05-12 11:54:35 +00:00
bit on replies for the private zone (authoritative servers do not set the
2022-02-17 22:47:14 +00:00
AD bit). This setup makes Unbound capable of answering queries for the
2018-05-12 11:54:35 +00:00
private zone, and can even set the AD bit ('authentic'), but the AA
('authoritative') bit is not set on these replies.
2015-10-09 11:29:49 +00:00
.P
Consider adding \fB server:\fR statements for \fB domain\- insecure:\fR and
for \fB local\- zone:\fI name nodefault\fR for the zone if it is a locally
served zone. The insecure clause stops DNSSEC from invalidating the
zone. The local zone nodefault (or \fI transparent\fR ) clause makes the
2022-02-17 22:47:14 +00:00
(reverse\- ) zone bypass Unbound's filtering of RFC1918 zones.
2012-07-04 14:24:26 +00:00
.TP
.B name: \fI <domain name>
2021-12-03 05:35:06 +00:00
Name of the stub zone. This is the full domain name of the zone.
2012-07-04 14:24:26 +00:00
.TP
.B stub\-host: \fI <domain name>
Name of stub zone nameserver. Is itself resolved before it is used.
2022-02-17 22:47:14 +00:00
To use a nondefault port for DNS communication append '@' with the port number.
If tls is enabled, then you can append a '#' and a name, then it'll check the
tls authentication certificates with that name. If you combine the '@'
and '#', the '@' comes first. If only '#' is used the default port is the
configured tls\- port.
2012-07-04 14:24:26 +00:00
.TP
.B stub\-addr: \fI <IP address>
IP address of stub zone nameserver. Can be IP 4 or IP 6.
To use a nondefault port for DNS communication append '@' with the port number.
2022-02-17 22:47:14 +00:00
If tls is enabled, then you can append a '#' and a name, then it'll check the
tls authentication certificates with that name. If you combine the '@'
and '#', the '@' comes first. If only '#' is used the default port is the
configured tls\- port.
2012-07-04 14:24:26 +00:00
.TP
.B stub\-prime: \fI <yes or no>
2018-09-10 16:30:18 +00:00
This option is by default no. If enabled it performs NS set priming,
2018-05-12 11:54:35 +00:00
which is similar to root hints, where it starts using the list of nameservers
2012-07-04 14:24:26 +00:00
currently published by the zone. Thus, if the hint list is slightly outdated,
the resolver picks up a correct list online.
.TP
.B stub\-first: \fI <yes or no>
If enabled, a query is attempted without the stub clause if it fails.
2013-04-05 09:06:26 +00:00
The data could not be retrieved and would have caused SERVFAIL because
the servers are unreachable, instead it is tried without this clause.
2012-07-04 14:24:26 +00:00
The default is no.
2017-02-03 13:06:34 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B stub\-tls\-upstream: \fI <yes or no>
2018-05-12 11:56:52 +00:00
Enabled or disable whether the queries to this stub use TLS for transport.
2017-02-03 13:06:34 +00:00
Default is no.
2018-05-12 11:56:38 +00:00
.TP
.B stub\-ssl\-upstream: \fI <yes or no>
Alternate syntax for \fB stub\- tls\- upstream\fR .
2018-09-10 16:32:55 +00:00
.TP
2021-12-03 05:35:06 +00:00
.B stub\-tcp\-upstream: \fI <yes or no>
If it is set to "yes" then upstream queries use TCP only for transport regardless of global flag tcp-upstream.
Default is no.
.TP
2018-09-10 16:32:55 +00:00
.B stub\-no\-cache: \fI <yes or no>
Default is no. If enabled, data inside the stub is not cached. This is
useful when you want immediate changes to be visible.
2012-07-04 14:24:26 +00:00
.SS "Forward Zone Options"
.LP
There may be multiple
.B forward\-zone:
clauses. Each with a \fB name:\fR and zero or more hostnames or IP
addresses. For the forward zone this list of nameservers is used to
forward the queries to. The servers listed as \fB forward\- host:\fR and
\fB forward\- addr:\fR have to handle further recursion for the query. Thus,
2022-02-17 22:47:14 +00:00
those servers are not authority servers, but are (just like Unbound is)
recursive servers too; Unbound does not perform recursion itself for the
2012-07-04 14:24:26 +00:00
forward zone, it lets the remote server do it. Class IN is assumed.
2022-02-17 22:47:14 +00:00
CNAMEs are chased by Unbound itself, asking the remote server for every
2018-05-12 11:56:38 +00:00
name in the indirection chain, to protect the local cache from illegal
indirect referenced items.
2012-07-04 14:24:26 +00:00
A forward\- zone entry with name "." and a forward\- addr target will
forward all queries to that other server (unless it can answer from
the cache).
.TP
.B name: \fI <domain name>
2021-12-03 05:35:06 +00:00
Name of the forward zone. This is the full domain name of the zone.
2012-07-04 14:24:26 +00:00
.TP
.B forward\-host: \fI <domain name>
Name of server to forward to. Is itself resolved before it is used.
2022-02-17 22:47:14 +00:00
To use a nondefault port for DNS communication append '@' with the port number.
If tls is enabled, then you can append a '#' and a name, then it'll check the
tls authentication certificates with that name. If you combine the '@'
and '#', the '@' comes first. If only '#' is used the default port is the
configured tls\- port.
2012-07-04 14:24:26 +00:00
.TP
.B forward\-addr: \fI <IP address>
IP address of server to forward to. Can be IP 4 or IP 6.
To use a nondefault port for DNS communication append '@' with the port number.
2022-02-17 22:47:14 +00:00
If tls is enabled, then you can append a '#' and a name, then it'll check the
tls authentication certificates with that name. If you combine the '@'
and '#', the '@' comes first. If only '#' is used the default port is the
configured tls\- port.
2018-05-12 11:56:52 +00:00
.IP
At high verbosity it logs the TLS certificate, with TLS enabled.
If you leave out the '#' and auth name from the forward\- addr, any
name is accepted. The cert must also match a CA from the tls\- cert\- bundle.
2012-07-04 14:24:26 +00:00
.TP
.B forward\-first: \fI <yes or no>
2019-06-30 14:56:56 +00:00
If a forwarded query is met with a SERVFAIL error, and this option is
2022-02-17 22:47:14 +00:00
enabled, Unbound will fall back to normal recursive resolution for this
2019-06-30 14:56:56 +00:00
query as if no query forwarding had been specified. The default is "no".
2017-02-03 13:06:34 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B forward\-tls\-upstream: \fI <yes or no>
2018-05-12 11:56:52 +00:00
Enabled or disable whether the queries to this forwarder use TLS for transport.
2017-02-03 13:06:34 +00:00
Default is no.
2018-09-10 16:32:55 +00:00
If you enable this, also configure a tls\- cert\- bundle or use tls\- win\- cert to
2018-09-10 16:30:18 +00:00
load CA certs, otherwise the connections cannot be authenticated.
2018-05-12 11:56:38 +00:00
.TP
.B forward\-ssl\-upstream: \fI <yes or no>
Alternate syntax for \fB forward\- tls\- upstream\fR .
2018-09-10 16:32:55 +00:00
.TP
2021-12-03 05:35:06 +00:00
.B forward\-tcp\-upstream: \fI <yes or no>
If it is set to "yes" then upstream queries use TCP only for transport regardless of global flag tcp-upstream.
Default is no.
.TP
2018-09-10 16:32:55 +00:00
.B forward\-no\-cache: \fI <yes or no>
Default is no. If enabled, data inside the forward is not cached. This is
useful when you want immediate changes to be visible.
2018-05-12 11:56:38 +00:00
.SS "Authority Zone Options"
.LP
Authority zones are configured with \fB auth\- zone:\fR , and each one must
have a \fB name:\fR . There can be multiple ones, by listing multiple auth\- zone clauses, each with a different name, pertaining to that part of the namespace.
The authority zone with the name closest to the name looked up is used.
Authority zones are processed after \fB local\- zones\fR and before
cache (\fB for\- downstream:\fR \fI yes\fR ), and when used in this manner
2022-02-17 22:47:14 +00:00
make Unbound respond like an authority server. Authority zones are also
2018-05-12 11:56:38 +00:00
processed after cache, just before going to the network to fetch
information for recursion (\fB for\- upstream:\fR \fI yes\fR ), and when used
in this manner provide a local copy of an authority server that speeds up
lookups of that data.
.LP
Authority zones can be read from zonefile. And can be kept updated via
AXFR and IXFR. After update the zonefile is rewritten. The update mechanism
uses the SOA timer values and performs SOA UDP queries to detect zone changes.
2019-02-06 12:31:02 +00:00
.LP
If the update fetch fails, the timers in the SOA record are used to time
another fetch attempt. Until the SOA expiry timer is reached. Then the
zone is expired. When a zone is expired, queries are SERVFAIL, and
2020-10-27 15:09:16 +00:00
any new serial number is accepted from the primary (even if older), and if
2019-02-06 12:31:02 +00:00
fallback is enabled, the fallback activates to fetch from the upstream instead
of the SERVFAIL.
2018-05-12 11:56:38 +00:00
.TP
.B name: \fI <zone name>
Name of the authority zone.
.TP
2020-10-27 15:09:16 +00:00
.B primary: \fI <IP address or host name>
2018-05-12 11:56:38 +00:00
Where to download a copy of the zone from, with AXFR and IXFR. Multiple
2020-10-27 15:09:16 +00:00
primaries can be specified. They are all tried if one fails.
2021-08-16 23:55:17 +00:00
To use a nondefault port for DNS communication append '@' with the port number.
You can append a '#' and a name, then AXFR over TLS can be used and the tls authentication certificates will be checked with that name. If you combine
the '@' and '#', the '@' comes first.
2020-05-21 05:01:52 +00:00
If you point it at another Unbound instance, it would not work because
that does not support AXFR/IXFR for the zone, but if you used \fB url:\fR to download
the zonefile as a text file from a webserver that would work.
If you specify the hostname, you cannot use the domain from the zonefile,
because it may not have that when retrieving that data, instead use a plain
IP address to avoid a circular dependency on retrieving that IP address.
2018-05-12 11:56:38 +00:00
.TP
2020-10-27 15:09:16 +00:00
.B master: \fI <IP address or host name>
Alternate syntax for \fB primary\fR .
.TP
2018-05-12 11:56:38 +00:00
.B url: \fI <url to zonefile>
Where to download a zonefile for the zone. With http or https. An example
for the url is "http://www.example.com/example.org.zone". Multiple url
statements can be given, they are tried in turn. If only urls are given
the SOA refresh timer is used to wait for making new downloads. If also
2020-10-27 15:09:16 +00:00
primaries are listed, the primaries are first probed with UDP SOA queries to
2018-05-12 11:56:38 +00:00
see if the SOA serial number has changed, reducing the number of downloads.
2020-10-27 15:09:16 +00:00
If none of the urls work, the primaries are tried with IXFR and AXFR.
2018-05-12 11:56:38 +00:00
For https, the \fB tls\- cert\- bundle\fR and the hostname from the url are used
to authenticate the connection.
2020-05-21 05:01:52 +00:00
If you specify a hostname in the URL, you cannot use the domain from the
zonefile, because it may not have that when retrieving that data, instead
use a plain IP address to avoid a circular dependency on retrieving that IP
2020-10-27 15:09:16 +00:00
address. Avoid dependencies on name lookups by using a notation like
"http://192.0.2.1/unbound-primaries/example.com.zone", with an explicit IP address.
2018-05-12 11:56:38 +00:00
.TP
2018-05-12 11:56:52 +00:00
.B allow\-notify: \fI <IP address or host name or netblockIP/prefix>
With allow\- notify you can specify additional sources of notifies.
When notified, the server attempts to first probe and then zone transfer.
2020-10-27 15:09:16 +00:00
If the notify is from a primary, it first attempts that primary. Otherwise
other primaries are attempted. If there are no primaries, but only urls, the
2022-07-13 13:02:01 +00:00
file is downloaded when notified. The primaries from primary: and url:
statements are allowed notify by default.
2018-05-12 11:56:52 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B fallback\-enabled: \fI <yes or no>
2022-02-17 22:47:14 +00:00
Default no. If enabled, Unbound falls back to querying the internet as
2018-05-12 11:56:38 +00:00
a resolver for this zone when lookups fail. For example for DNSSEC
validation failures.
.TP
.B for\-downstream: \fI <yes or no>
2022-02-17 22:47:14 +00:00
Default yes. If enabled, Unbound serves authority responses to
downstream clients for this zone. This option makes Unbound behave, for
2018-05-12 11:56:38 +00:00
the queries with names in this zone, like one of the authority servers for
2022-02-17 22:47:14 +00:00
that zone. Turn it off if you want Unbound to provide recursion for the
2018-05-12 11:56:38 +00:00
zone but have a local copy of zone data. If for\- downstream is no and
2022-02-17 22:47:14 +00:00
for\- upstream is yes, then Unbound will DNSSEC validate the contents of the
2018-05-12 11:56:38 +00:00
zone before serving the zone contents to clients and store validation
results in the cache.
.TP
.B for\-upstream: \fI <yes or no>
2022-02-17 22:47:14 +00:00
Default yes. If enabled, Unbound fetches data from this data collection
2018-05-12 11:56:38 +00:00
for answering recursion queries. Instead of sending queries over the internet
to the authority servers for this zone, it'll fetch the data directly from
2022-02-17 22:47:14 +00:00
the zone data. Turn it on when you want Unbound to provide recursion for
2018-05-12 11:56:38 +00:00
downstream clients, and use the zone data as a local copy to speed up lookups.
.TP
2021-08-16 23:55:17 +00:00
.B zonemd\-check: \fI <yes or no>
Enable this option to check ZONEMD records in the zone. Default is disabled.
The ZONEMD record is a checksum over the zone data. This includes glue in
the zone and data from the zone file, and excludes comments from the zone file.
When there is a DNSSEC chain of trust, DNSSEC signatures are checked too.
.TP
.B zonemd\-reject\-absence: \fI <yes or no>
Enable this option to reject the absence of the ZONEMD record. Without it,
when zonemd is not there it is not checked. It is useful to enable for a
nonDNSSEC signed zone where the operator wants to require the verification
of a ZONEMD, hence a missing ZONEMD is a failure. The action upon
failure is controlled by the \fB zonemd\- permissive\- mode\fR option, for
log only or also block the zone. The default is no.
.IP
Without the option absence of a ZONEMD is only a failure when the zone is
DNSSEC signed, and we have a trust anchor, and the DNSSEC verification of
the absence of the ZONEMD fails. With the option enabled, the absence of
a ZONEMD is always a failure, also for nonDNSSEC signed zones.
.TP
2018-05-12 11:56:38 +00:00
.B zonefile: \fI <filename>
The filename where the zone is stored. If not given then no zonefile is used.
2022-02-17 22:47:14 +00:00
If the file does not exist or is empty, Unbound will attempt to fetch zone
2020-10-27 15:09:16 +00:00
data (eg. from the primary servers).
2017-02-03 13:06:34 +00:00
.SS "View Options"
.LP
There may be multiple
.B view:
clauses. Each with a \fB name:\fR and zero or more \fB local\- zone\fR and
2022-02-17 22:47:14 +00:00
\fB local\- data\fR elements. Views can also contain view\- first,
2019-06-30 14:56:56 +00:00
response\- ip, response\- ip\- data and local\- data\- ptr elements.
View can be mapped to requests by specifying the
2018-05-12 11:54:35 +00:00
view name in an \fB access\- control\- view\fR element. Options from matching
views will override global options. Global options will be used if no matching
view is found, or when the matching view does not have the option specified.
2017-02-03 13:06:34 +00:00
.TP
.B name: \fI <view name>
Name of the view. Must be unique. This name is used in access\- control\- view
elements.
.TP
.B local\-zone: \fI <zone> <type>
View specific local\- zone elements. Has the same types and behaviour as the
2018-05-12 11:54:35 +00:00
global local\- zone elements. When there is at least one local\- zone specified
and view\- first is no, the default local-zones will be added to this view.
Defaults can be disabled using the nodefault type. When view\- first is yes or
when a view does not have a local\- zone, the global local\- zone will be used
including it's default zones.
2017-02-03 13:06:34 +00:00
.TP
.B local\-data: \fI "<resource record string>"
View specific local\- data elements. Has the same behaviour as the global
local\- data elements.
.TP
2018-05-12 11:53:39 +00:00
.B local\-data\-ptr: \fI "IPaddr name"
View specific local\- data\- ptr elements. Has the same behaviour as the global
local\- data\- ptr elements.
.TP
2017-02-03 13:06:34 +00:00
.B view\-first: \fI <yes or no>
If enabled, it attempts to use the global local\- zone and local\- data if there
is no match in the view specific options.
The default is no.
2012-07-04 14:24:26 +00:00
.SS "Python Module Options"
.LP
The
.B python:
clause gives the settings for the \fI python\fR (1) script module. This module
acts like the iterator and validator modules do, on queries and answers.
To enable the script module it has to be compiled into the daemon,
and the word "python" has to be put in the \fB module\- config:\fR option
2019-12-28 05:27:06 +00:00
(usually first, or between the validator and iterator). Multiple instances of
the python module are supported by adding the word "python" more than once.
2018-05-12 11:49:30 +00:00
.LP
If the \fB chroot:\fR option is enabled, you should make sure Python's
library directory structure is bind mounted in the new root environment, see
\fI mount\fR (8). Also the \fB python\- script:\fR path should be specified as an
absolute path relative to the new root, or as a relative path to the working
directory.
2012-07-04 14:24:26 +00:00
.TP
.B python\-script: \fI <python file>\fR
2019-12-28 05:27:06 +00:00
The script file to load. Repeat this option for every python module instance
added to the \fB module\- config:\fR option.
2020-08-21 22:56:05 +00:00
.SS "Dynamic Library Module Options"
.LP
The
.B dynlib:
clause gives the settings for the \fI dynlib\fR module. This module is only
a very small wrapper that allows dynamic modules to be loaded on runtime
instead of being compiled into the application. To enable the dynlib module it
has to be compiled into the daemon, and the word "dynlib" has to be put in the
\fB module\- config:\fR option. Multiple instances of dynamic libraries are
supported by adding the word "dynlib" more than once.
.LP
The \fB dynlib\- file:\fR path should be specified as an absolute path relative
to the new path set by \fB chroot:\fR option, or as a relative path to the
working directory.
.TP
.B dynlib\-file: \fI <dynlib file>\fR
The dynamic library file to load. Repeat this option for every dynlib module
instance added to the \fB module\- config:\fR option.
2015-01-02 17:31:36 +00:00
.SS "DNS64 Module Options"
.LP
The dns64 module must be configured in the \fB module\- config:\fR "dns64
validator iterator" directive and be compiled into the daemon to be
enabled. These settings go in the \fB server:\fR section.
.TP
.B dns64\-prefix: \fI <IPv6 prefix>\fR
This sets the DNS64 prefix to use to synthesize AAAA records with.
It must be /96 or shorter. The default prefix is 64:ff9b::/96.
.TP
.B dns64\-synthall: \fI <yes or no>\fR
Debug option, default no. If enabled, synthesize all AAAA records
despite the presence of actual AAAA records.
2018-09-10 16:32:55 +00:00
.TP
.B dns64\-ignore\-aaaa: \fI <name>\fR
List domain for which the AAAA records are ignored and the A record is
used by dns64 processing instead. Can be entered multiple times, list a
new domain for which it applies, one per line. Applies also to names
underneath the name given.
2018-05-12 11:53:39 +00:00
.SS "DNSCrypt Options"
.LP
The
.B dnscrypt:
2018-05-12 11:55:17 +00:00
clause gives the settings of the dnscrypt channel. While those options are
2022-02-17 22:47:14 +00:00
available, they are only meaningful if Unbound was compiled with
2018-05-12 11:53:39 +00:00
\fB \- \- enable\- dnscrypt\fR .
2022-02-17 22:47:14 +00:00
Currently certificate and secret/public keys cannot be generated by Unbound.
2018-05-12 11:54:35 +00:00
You can use dnscrypt-wrapper to generate those: https://github.com/cofyc/\
dnscrypt-wrapper/blob/master/README.md#usage
2018-05-12 11:53:39 +00:00
.TP
.B dnscrypt\-enable: \fI <yes or no>\fR
Whether or not the \fB dnscrypt\fR config should be enabled. You may define
configuration but not activate it.
The default is no.
.TP
.B dnscrypt\-port: \fI <port number>
On which port should \fB dnscrypt\fR should be activated. Note that you should
have a matching \fB interface\fR option defined in the \fB server\fR section for
this port.
.TP
.B dnscrypt\-provider: \fI <provider name>\fR
The provider name to use to distribute certificates. This is of the form:
\fB 2.dnscrypt-cert.example.com.\fR . The name \fI MUST\fR end with a dot.
.TP
.B dnscrypt\-secret\-key: \fI <path to secret key file>\fR
Path to the time limited secret key file. This option may be specified multiple
times.
.TP
.B dnscrypt\-provider\-cert: \fI <path to cert file>\fR
2018-05-12 11:54:35 +00:00
Path to the certificate related to the \fB dnscrypt\- secret\- key\fR s.
This option may be specified multiple times.
2018-05-12 11:55:17 +00:00
.TP
2018-05-12 11:56:38 +00:00
.B dnscrypt\-provider\-cert\-rotated: \fI <path to cert file>\fR
Path to a certificate that we should be able to serve existing connection from
but do not want to advertise over \fB dnscrypt\- provider\fR 's TXT record certs
distribution.
A typical use case is when rotating certificates, existing clients may still use
the client magic from the old cert in their queries until they fetch and update
the new cert. Likewise, it would allow one to prime the new cert/key without
distributing the new cert yet, this can be useful when using a network of
servers using anycast and on which the configuration may not get updated at the
exact same time. By priming the cert, the servers can handle both old and new
certs traffic while distributing only one.
This option may be specified multiple times.
.TP
2018-05-12 11:55:17 +00:00
.B dnscrypt\-shared\-secret\-cache\-size: \fI <memory size>
Give the size of the data structure in which the shared secret keys are kept
in. Default 4m. In bytes or use m(mega), k(kilo), g(giga).
The shared secret cache is used when a same client is making multiple queries
using the same public key. It saves a substantial amount of CPU.
.TP
.B dnscrypt\-shared\-secret\-cache\-slabs: \fI <number>
Give power of 2 number of slabs, this is used to reduce lock contention
in the dnscrypt shared secrets cache. Close to the number of cpus is
a fairly good setting.
2018-05-12 11:55:57 +00:00
.TP
.B dnscrypt\-nonce\-cache\-size: \fI <memory size>
Give the size of the data structure in which the client nonces are kept in.
Default 4m. In bytes or use m(mega), k(kilo), g(giga).
The nonce cache is used to prevent dnscrypt message replaying. Client nonce
should be unique for any pair of client pk/server sk.
.TP
.B dnscrypt\-nonce\-cache\-slabs: \fI <number>
Give power of 2 number of slabs, this is used to reduce lock contention
in the dnscrypt nonce cache. Close to the number of cpus is
a fairly good setting.
2018-05-12 11:53:39 +00:00
.SS "EDNS Client Subnet Module Options"
.LP
The ECS module must be configured in the \fB module\- config:\fR "subnetcache
validator iterator" directive and be compiled into the daemon to be
enabled. These settings go in the \fB server:\fR section.
.LP
2020-10-27 15:09:16 +00:00
If the destination address is allowed in the configuration Unbound will add the
EDNS0 option to the query containing the relevant part of the client's address.
When an answer contains the ECS option the response and the option are placed in
a specialized cache. If the authority indicated no support, the response is
2018-05-12 11:54:35 +00:00
stored in the regular cache.
2018-05-12 11:53:39 +00:00
.LP
Additionally, when a client includes the option in its queries, Unbound will
2020-10-27 15:09:16 +00:00
forward the option when sending the query to addresses that are explicitly
allowed in the configuration using \fB send\- client\- subnet\fR . The option will
always be forwarded, regardless the allowed addresses, if
2018-05-12 11:54:35 +00:00
\fB client\- subnet\- always\- forward\fR is set to yes. In this case the lookup in
the regular cache is skipped.
2018-05-12 11:53:39 +00:00
.LP
The maximum size of the ECS cache is controlled by 'msg-cache-size' in the
configuration file. On top of that, for each query only 100 different subnets
are allowed to be stored for each address family. Exceeding that number, older
entries will be purged from cache.
2023-01-13 23:52:47 +00:00
.LP
This module does not interact with the \fB serve\- expired*\fR and
\fB prefetch:\fR options.
2018-05-12 11:53:39 +00:00
.TP
.B send\-client\-subnet: \fI <IP address>\fR
Send client source address to this authority. Append /num to indicate a
classless delegation netblock, for example like 10.2.3.4/24 or 2001::11/64. Can
be given multiple times. Authorities not listed will not receive edns-subnet
2018-05-12 11:54:35 +00:00
information, unless domain in query is specified in \fB client\- subnet\- zone\fR .
.TP
.B client\-subnet\-zone: \fI <domain>\fR
Send client source address in queries for this domain and its subdomains. Can be
given multiple times. Zones not listed will not receive edns-subnet information,
unless hosted by authority specified in \fB send\- client\- subnet\fR .
2018-05-12 11:53:39 +00:00
.TP
.B client\-subnet\-always\-forward: \fI <yes or no>\fR
2020-10-27 15:09:16 +00:00
Specify whether the ECS address check (configured using
2018-05-12 11:53:39 +00:00
\fB send\- client\- subnet\fR ) is applied for all queries, even if the triggering
query contains an ECS record, or only for queries for which the ECS record is
generated using the querier address (and therefore did not contain ECS data in
2020-10-27 15:09:16 +00:00
the client query). If enabled, the address check is skipped when the client
2021-02-09 20:59:02 +00:00
query contains an ECS record. And the lookup in the regular cache is skipped.
Default is no.
2018-05-12 11:53:39 +00:00
.TP
.B max\-client\-subnet\-ipv6: \fI <number>\fR
Specifies the maximum prefix length of the client source address we are willing
to expose to third parties for IPv6. Defaults to 56.
.TP
.B max\-client\-subnet\-ipv4: \fI <number>\fR
Specifies the maximum prefix length of the client source address we are willing
to expose to third parties for IPv4. Defaults to 24.
2019-02-06 12:31:02 +00:00
.TP
.B min\-client\-subnet\-ipv6: \fI <number>\fR
Specifies the minimum prefix length of the IPv6 source mask we are willing to
accept in queries. Shorter source masks result in REFUSED answers. Source mask
of 0 is always accepted. Default is 0.
.TP
.B min\-client\-subnet\-ipv4: \fI <number>\fR
Specifies the minimum prefix length of the IPv4 source mask we are willing to
2022-02-17 22:47:14 +00:00
accept in queries. Shorter source masks result in REFUSED answers. Source mask
2019-02-06 12:31:02 +00:00
of 0 is always accepted. Default is 0.
.TP
.B max\-ecs\-tree\-size\-ipv4: \fI <number>\fR
Specifies the maximum number of subnets ECS answers kept in the ECS radix tree.
This number applies for each qname/qclass/qtype tuple. Defaults to 100.
.TP
.B max\-ecs\-tree\-size\-ipv6: \fI <number>\fR
Specifies the maximum number of subnets ECS answers kept in the ECS radix tree.
This number applies for each qname/qclass/qtype tuple. Defaults to 100.
2018-05-12 11:54:35 +00:00
.SS "Opportunistic IPsec Support Module Options"
.LP
The IPsec module must be configured in the \fB module\- config:\fR "ipsecmod
2022-02-17 22:47:14 +00:00
validator iterator" directive and be compiled into Unbound by using
\fB \- \- enable\- ipsecmod\fR to be enabled.
These settings go in the \fB server:\fR section.
2018-05-12 11:54:35 +00:00
.LP
2022-02-17 22:47:14 +00:00
When Unbound receives an A/AAAA query that is not in the cache and finds a
2018-05-12 11:54:35 +00:00
valid answer, it will withhold returning the answer and instead will generate
2022-02-17 22:47:14 +00:00
an IPSECKEY subquery for the same domain name. If an answer was found, Unbound
2018-05-12 11:54:35 +00:00
will call an external hook passing the following arguments:
.TP 10
\h '5'\fI QNAME\fR
Domain name of the A/AAAA and IPSECKEY query. In string format.
.TP 10
\h '5'\fI IPSECKEY TTL\fR
TTL of the IPSECKEY RRset.
.TP 10
\h '5'\fI A/AAAA\fR
String of space separated IP addresses present in the A/AAAA RRset. The IP
addresses are in string format.
.TP 10
\h '5'\fI IPSECKEY\fR
String of space separated IPSECKEY RDATA present in the IPSECKEY RRset. The
IPSECKEY RDATA are in DNS presentation format.
.LP
The A/AAAA answer is then cached and returned to the client. If the external
hook was called the TTL changes to ensure it doesn't surpass
\fB ipsecmod-max-ttl\fR .
.LP
The same procedure is also followed when \fB prefetch:\fR is used, but the
A/AAAA answer is given to the client before the hook is called.
\fB ipsecmod-max-ttl\fR ensures that the A/AAAA answer given from cache is still
relevant for opportunistic IPsec.
.TP
.B ipsecmod-enabled: \fI <yes or no>\fR
Specifies whether the IPsec module is enabled or not. The IPsec module still
needs to be defined in the \fB module\- config:\fR directive. This option
2022-02-17 22:47:14 +00:00
facilitates turning on/off the module without restarting/reloading Unbound.
2018-05-12 11:54:35 +00:00
Defaults to yes.
.TP
.B ipsecmod\-hook: \fI <filename>\fR
2022-02-17 22:47:14 +00:00
Specifies the external hook that Unbound will call with \fI system\fR (3). The
2018-05-12 11:54:35 +00:00
file can be specified as an absolute/relative path. The file needs the proper
2022-02-17 22:47:14 +00:00
permissions to be able to be executed by the same user that runs Unbound. It
2018-05-12 11:54:35 +00:00
must be present when the IPsec module is defined in the \fB module\- config:\fR
directive.
.TP
.B ipsecmod-strict: \fI <yes or no>\fR
2022-02-17 22:47:14 +00:00
If enabled Unbound requires the external hook to return a success value of 0.
Failing to do so Unbound will reply with SERVFAIL. The A/AAAA answer will also
2018-05-12 11:54:35 +00:00
not be cached. Defaults to no.
.TP
.B ipsecmod\-max-ttl: \fI <seconds>\fR
Time to live maximum for A/AAAA cached records after calling the external hook.
Defaults to 3600.
.TP
.B ipsecmod-ignore-bogus: \fI <yes or no>\fR
2022-02-17 22:47:14 +00:00
Specifies the behaviour of Unbound when the IPSECKEY answer is bogus. If set
2018-05-12 11:54:35 +00:00
to yes, the hook will be called and the A/AAAA answer will be returned to the
client. If set to no, the hook will not be called and the answer to the
A/AAAA query will be SERVFAIL. Mainly used for testing. Defaults to no.
.TP
2020-10-27 15:09:16 +00:00
.B ipsecmod\-allow: \fI <domain>\fR
Allow the ipsecmod functionality for the domain so that the module logic will be
executed. Can be given multiple times, for different domains. If the option is
not specified, all domains are treated as being allowed (default).
.TP
.B ipsecmod\-whitelist: \fI <yes or no>
Alternate syntax for \fB ipsecmod\- allow\fR .
2018-05-12 11:55:17 +00:00
.SS "Cache DB Module Options"
.LP
The Cache DB module must be configured in the \fB module\- config:\fR
"validator cachedb iterator" directive and be compiled into the daemon
with \fB \- \- enable\- cachedb\fR .
If this module is enabled and configured, the specified backend database
works as a second level cache:
When Unbound cannot find an answer to a query in its built-in in-memory
cache, it consults the specified backend.
If it finds a valid answer in the backend, Unbound uses it to respond
to the query without performing iterative DNS resolution.
If Unbound cannot even find an answer in the backend, it resolves the
query as usual, and stores the answer in the backend.
2018-05-12 11:56:52 +00:00
.P
2020-05-21 05:01:52 +00:00
This module interacts with the \fB serve\- expired\- *\fR options and will reply
2022-02-17 22:47:14 +00:00
with expired data if Unbound is configured for that. Currently the use
2020-05-21 05:01:52 +00:00
of \fB serve\- expired\- client\- timeout:\fR and
\fB serve\- expired\- reply\- ttl:\fR is not consistent for data originating from
the external cache as these will result in a reply with 0 TTL without trying to
update the data first, ignoring the configured values.
.P
2018-05-12 11:56:52 +00:00
If Unbound was built with
\fB \- \- with\- libhiredis\fR
on a system that has installed the hiredis C client library of Redis,
then the "redis" backend can be used.
This backend communicates with the specified Redis server over a TCP
2018-09-10 16:30:18 +00:00
connection to store and retrieve cache data.
2018-05-12 11:56:52 +00:00
It can be used as a persistent and/or shared cache backend.
It should be noted that Unbound never removes data stored in the Redis server,
even if some data have expired in terms of DNS TTL or the Redis server has
cached too much data;
if necessary the Redis server must be configured to limit the cache size,
preferably with some kind of least-recently-used eviction policy.
2020-10-27 15:09:16 +00:00
Additionally, the \fB redis\- expire\- records\fR option can be used in order to
2020-08-21 22:56:05 +00:00
set the relative DNS TTL of the message as timeout to the Redis records; keep
in mind that some additional memory is used per key and that the expire
information is stored as absolute Unix timestamps in Redis (computer time must
be stable).
2018-05-12 11:56:52 +00:00
This backend uses synchronous communication with the Redis server
based on the assumption that the communication is stable and sufficiently
fast.
The thread waiting for a response from the Redis server cannot handle
other DNS queries.
Although the backend has the ability to reconnect to the server when
the connection is closed unexpectedly and there is a configurable timeout
in case the server is overly slow or hangs up, these cases are assumed
to be very rare.
If connection close or timeout happens too often, Unbound will be
effectively unusable with this backend.
It's the administrator's responsibility to make the assumption hold.
.P
2018-05-12 11:55:17 +00:00
The
.B cachedb:
clause gives custom settings of the cache DB module.
.TP
.B backend: \fI <backend name>\fR
Specify the backend database name.
2018-05-12 11:56:52 +00:00
The default database is the in-memory backend named "testframe", which,
as the name suggests, is not of any practical use.
Depending on the build-time configuration, "redis" backend may also be
used as described above.
2018-05-12 11:55:17 +00:00
.TP
.B secret-seed: \fI <"secret string">\fR
Specify a seed to calculate a hash value from query information.
This value will be used as the key of the corresponding answer for the
backend database and can be customized if the hash should not be predictable
operationally.
If the backend database is shared by multiple Unbound instances,
all instances must use the same secret seed.
This option defaults to "default".
2018-05-12 11:56:52 +00:00
.P
The following
.B cachedb
2021-12-03 05:35:06 +00:00
options are specific to the redis backend.
2018-05-12 11:56:52 +00:00
.TP
.B redis-server-host: \fI <server address or name>\fR
The IP (either v6 or v4) address or domain name of the Redis server.
In general an IP address should be specified as otherwise Unbound will have to
resolve the name of the server every time it establishes a connection
to the server.
This option defaults to "127.0.0.1".
.TP
.B redis-server-port: \fI <port number>\fR
The TCP port number of the Redis server.
This option defaults to 6379.
.TP
.B redis-timeout: \fI <msec>\fR
The period until when Unbound waits for a response from the Redis sever.
If this timeout expires Unbound closes the connection, treats it as
if the Redis server does not have the requested data, and will try to
re-establish a new connection later.
This option defaults to 100 milliseconds.
2020-08-21 22:56:05 +00:00
.TP
.B redis-expire-records: \fI <yes or no>
2022-02-17 22:47:14 +00:00
If Redis record expiration is enabled. If yes, Unbound sets timeout for Redis
2020-08-21 22:56:05 +00:00
records so that Redis can evict keys that have expired automatically. If
2022-02-17 22:47:14 +00:00
Unbound is configured with \fB serve-expired\fR and \fB serve-expired-ttl\fR is 0,
2020-08-21 22:56:05 +00:00
this option is internally reverted to "no". Redis SETEX support is required
for this option (Redis >= 2.0.0).
This option defaults to no.
.SS DNSTAP Logging Options
2022-02-17 22:47:14 +00:00
DNSTAP support, when compiled in by using \fB \- \- enable\- dnstap\fR , is enabled
in the \fB dnstap:\fR section.
2020-08-21 22:56:05 +00:00
This starts an extra thread (when compiled with threading) that writes
2022-02-17 22:47:14 +00:00
the log information to the destination. If Unbound is compiled without
2020-08-21 22:56:05 +00:00
threading it does not spawn a thread, but connects per-process to the
destination.
.TP
.B dnstap-enable: \fI <yes or no>
If dnstap is enabled. Default no. If yes, it connects to the dnstap server
and if any of the dnstap-log-..-messages options is enabled it sends logs
for those messages to the server.
.TP
.B dnstap-bidirectional: \fI <yes or no>
Use frame streams in bidirectional mode to transfer DNSTAP messages. Default is
yes.
.TP
.B dnstap-socket-path: \fI <file name>
Sets the unix socket file name for connecting to the server that is
listening on that socket. Default is "@DNSTAP_SOCKET_PATH@".
.TP
.B dnstap-ip: \fI <IPaddress[@port]>
If "", the unix socket is used, if set with an IP address (IPv4 or IPv6)
that address is used to connect to the server.
.TP
.B dnstap-tls: \fI <yes or no>
Set this to use TLS to connect to the server specified in \fB dnstap-ip\fR .
The default is yes. If set to no, TCP is used to connect to the server.
.TP
.B dnstap-tls-server-name: \fI <name of TLS authentication>
The TLS server name to authenticate the server with. Used when \fB dnstap-tls\fR is enabled. If "" it is ignored, default "".
.TP
.B dnstap-tls-cert-bundle: \fI <file name of cert bundle>
The pem file with certs to verify the TLS server certificate. If "" the
server default cert bundle is used, or the windows cert bundle on windows.
Default is "".
.TP
.B dnstap-tls-client-key-file: \fI <file name>
The client key file for TLS client authentication. If "" client
authentication is not used. Default is "".
.TP
.B dnstap-tls-client-cert-file: \fI <file name>
The client cert file for TLS client authentication. Default is "".
.TP
.B dnstap-send-identity: \fI <yes or no>
If enabled, the server identity is included in the log messages.
Default is no.
.TP
.B dnstap-send-version: \fI <yes or no>
If enabled, the server version if included in the log messages.
Default is no.
.TP
.B dnstap-identity: \fI <string>
The identity to send with messages, if "" the hostname is used.
Default is "".
.TP
.B dnstap-version: \fI <string>
The version to send with messages, if "" the package version is used.
Default is "".
.TP
.B dnstap-log-resolver-query-messages: \fI <yes or no>
Enable to log resolver query messages. Default is no.
2022-02-17 22:47:14 +00:00
These are messages from Unbound to upstream servers.
2020-08-21 22:56:05 +00:00
.TP
.B dnstap-log-resolver-response-messages: \fI <yes or no>
Enable to log resolver response messages. Default is no.
2022-02-17 22:47:14 +00:00
These are replies from upstream servers to Unbound.
2020-08-21 22:56:05 +00:00
.TP
.B dnstap-log-client-query-messages: \fI <yes or no>
Enable to log client query messages. Default is no.
2022-02-17 22:47:14 +00:00
These are client queries to Unbound.
2020-08-21 22:56:05 +00:00
.TP
.B dnstap-log-client-response-messages: \fI <yes or no>
Enable to log client response messages. Default is no.
2022-02-17 22:47:14 +00:00
These are responses from Unbound to clients.
2020-08-21 22:56:05 +00:00
.TP
.B dnstap-log-forwarder-query-messages: \fI <yes or no>
Enable to log forwarder query messages. Default is no.
.TP
.B dnstap-log-forwarder-response-messages: \fI <yes or no>
Enable to log forwarder response messages. Default is no.
2020-05-21 05:01:52 +00:00
.SS Response Policy Zone Options
.LP
Response Policy Zones are configured with \fB rpz:\fR , and each one must have a
\fB name:\fR . There can be multiple ones, by listing multiple rpz clauses, each
with a different name. RPZ clauses are applied in order of configuration. The
\fB respip\fR module needs to be added to the \fB module-config\fR , e.g.:
\fB module-config: "respip validator iterator"\fR .
.P
2021-12-03 05:35:06 +00:00
QNAME, Response IP Address, nsdname, nsip and clientip triggers are supported.
Supported actions are: NXDOMAIN, NODATA, PASSTHRU, DROP, Local Data, tcp\- only
and drop. RPZ QNAME triggers are applied after \fB local\- zones\fR and
before \fB auth\- zones\fR .
.P
The rpz zone is formatted with a SOA start record as usual. The items in
the zone are entries, that specify what to act on (the trigger) and what to
do (the action). The trigger to act on is recorded in the name, the action
to do is recorded as the resource record. The names all end in the zone
name, so you could type the trigger names without a trailing dot in the
zonefile.
.P
An example RPZ record, that answers example.com with NXDOMAIN
.nf
example.com CNAME .
.fi
.P
The triggers are encoded in the name on the left
.nf
name query name
netblock.rpz-client-ip client IP address
netblock.rpz-ip response IP address in the answer
name.rpz-nsdname nameserver name
netblock.rpz-nsip nameserver IP address
.fi
The netblock is written as <netblocklen>.<ip address in reverse>.
For IPv6 use 'zz' for '::'. Specify individual addresses with scope length
of 32 or 128. For example, 24.10.100.51.198.rpz-ip is 198.51.100.10/24 and
32.10.zz.db8.2001.rpz-ip is 2001:db8:0:0:0:0:0:10/32.
.P
The actions are specified with the record on the right
.nf
CNAME . nxdomain reply
CNAME *. nodata reply
CNAME rpz-passthru. do nothing, allow to continue
CNAME rpz-drop. the query is dropped
CNAME rpz-tcp-only. answer over TCP
A 192.0.2.1 answer with this IP address
.fi
Other records like AAAA, TXT and other CNAMEs (not rpz-..) can also be used to
answer queries with that content.
.P
The RPZ zones can be configured in the config file with these settings in the \fB rpz:\fR block.
2020-05-21 05:01:52 +00:00
.TP
.B name: \fI <zone name>
Name of the authority zone.
.TP
2020-10-27 15:09:16 +00:00
.B primary: \fI <IP address or host name>
2020-05-21 05:01:52 +00:00
Where to download a copy of the zone from, with AXFR and IXFR. Multiple
2020-10-27 15:09:16 +00:00
primaries can be specified. They are all tried if one fails.
2021-08-16 23:55:17 +00:00
To use a nondefault port for DNS communication append '@' with the port number.
You can append a '#' and a name, then AXFR over TLS can be used and the tls authentication certificates will be checked with that name. If you combine
the '@' and '#', the '@' comes first.
If you point it at another Unbound instance, it would not work because
that does not support AXFR/IXFR for the zone, but if you used \fB url:\fR to download
the zonefile as a text file from a webserver that would work.
If you specify the hostname, you cannot use the domain from the zonefile,
because it may not have that when retrieving that data, instead use a plain
IP address to avoid a circular dependency on retrieving that IP address.
2020-10-27 15:09:16 +00:00
.TP
.B master: \fI <IP address or host name>
Alternate syntax for \fB primary\fR .
2020-05-21 05:01:52 +00:00
.TP
.B url: \fI <url to zonefile>
Where to download a zonefile for the zone. With http or https. An example
for the url is "http://www.example.com/example.org.zone". Multiple url
statements can be given, they are tried in turn. If only urls are given
the SOA refresh timer is used to wait for making new downloads. If also
2020-10-27 15:09:16 +00:00
primaries are listed, the primaries are first probed with UDP SOA queries to
2020-05-21 05:01:52 +00:00
see if the SOA serial number has changed, reducing the number of downloads.
2020-10-27 15:09:16 +00:00
If none of the urls work, the primaries are tried with IXFR and AXFR.
2020-05-21 05:01:52 +00:00
For https, the \fB tls\- cert\- bundle\fR and the hostname from the url are used
to authenticate the connection.
.TP
.B allow\-notify: \fI <IP address or host name or netblockIP/prefix>
With allow\- notify you can specify additional sources of notifies.
When notified, the server attempts to first probe and then zone transfer.
2020-10-27 15:09:16 +00:00
If the notify is from a primary, it first attempts that primary. Otherwise
other primaries are attempted. If there are no primaries, but only urls, the
2022-07-13 13:02:01 +00:00
file is downloaded when notified. The primaries from primary: and url:
statements are allowed notify by default.
2020-05-21 05:01:52 +00:00
.TP
.B zonefile: \fI <filename>
The filename where the zone is stored. If not given then no zonefile is used.
2022-02-17 22:47:14 +00:00
If the file does not exist or is empty, Unbound will attempt to fetch zone
2020-10-27 15:09:16 +00:00
data (eg. from the primary servers).
2020-05-21 05:01:52 +00:00
.TP
.B rpz\-action\-override: \fI <action>
Always use this RPZ action for matching triggers from this zone. Possible action
are: nxdomain, nodata, passthru, drop, disabled and cname.
.TP
.B rpz\-cname\-override: \fI <domain>
The CNAME target domain to use if the cname action is configured for
\fB rpz\- action\- override\fR .
.TP
.B rpz\-log: \fI <yes or no>
Log all applied RPZ actions for this RPZ zone. Default is no.
.TP
.B rpz\-log\-name: \fI <name>
Specify a string to be part of the log line, for easy referencing.
.TP
2022-02-17 22:47:14 +00:00
.B rpz\-signal\-nxdomain\-ra: \fI <yes or no>
Signal when a query is blocked by the RPZ with NXDOMAIN with an unset RA flag.
This allows certain clients, like dnsmasq, to infer that the domain is
externally blocked. Default is no.
.TP
.B for\-downstream: \fI <yes or no>
If enabled the zone is authoritatively answered for and queries for the RPZ
zone information are answered to downstream clients. This is useful for
monitoring scripts, that can then access the SOA information to check if
the rpz information is up to date. Default is no.
.TP
2020-05-21 05:01:52 +00:00
.B tags: \fI <list of tags>
Limit the policies from this RPZ clause to clients with a matching tag. Tags
need to be defined in \fB define\- tag\fR and can be assigned to client addresses
using \fB access\- control\- tag\fR . Enclose list of tags in quotes ("") and put
spaces between tags. If no tags are specified the policies from this clause will
be applied for all clients.
2012-07-04 14:24:26 +00:00
.SH "MEMORY CONTROL EXAMPLE"
In the example config settings below memory usage is reduced. Some service
levels are lower, notable very large data and a high TCP load are no longer
supported. Very large data and high TCP loads are exceptional for the DNS.
DNSSEC validation is enabled, just add trust anchors.
If you do not have to worry about programs using more than 3 Mb of memory,
the below example is not for you. Use the defaults to receive full service,
2018-05-12 11:54:35 +00:00
which on BSD\- 32bit tops out at 30\- 40 Mb after heavy usage.
2012-07-04 14:24:26 +00:00
.P
.nf
# example settings that reduce memory usage
server:
num\- threads: 1
outgoing\- num\- tcp: 1 # this limits TCP service, uses less buffers.
incoming\- num\- tcp: 1
outgoing\- range: 60 # uses less memory, but less performance.
msg\- buffer\- size: 8192 # note this limits service, 'no huge stuff'.
msg\- cache\- size: 100k
msg\- cache\- slabs: 1
rrset\- cache\- size: 100k
rrset\- cache\- slabs: 1
infra\- cache\- numhosts: 200
infra\- cache\- slabs: 1
key\- cache\- size: 100k
key\- cache\- slabs: 1
neg\- cache\- size: 10k
num\- queries\- per\- thread: 30
target\- fetch\- policy: "2 1 0 0 0 0"
harden\- large\- queries: "yes"
harden\- short\- bufsize: "yes"
.fi
.SH "FILES"
.TP
.I @UNBOUND_RUN_DIR@
2022-02-17 22:47:14 +00:00
default Unbound working directory.
2012-07-04 14:24:26 +00:00
.TP
.I @UNBOUND_CHROOT_DIR@
default
\fI chroot\fR (2)
location.
.TP
.I @ub_conf_file@
2022-02-17 22:47:14 +00:00
Unbound configuration file.
2012-07-04 14:24:26 +00:00
.TP
.I @UNBOUND_PIDFILE@
2022-02-17 22:47:14 +00:00
default Unbound pidfile with process ID of the running daemon.
2012-07-04 14:24:26 +00:00
.TP
.I unbound.log
2022-02-17 22:47:14 +00:00
Unbound log file. default is to log to
2018-05-12 11:54:35 +00:00
\fI syslog\fR (3).
2012-07-04 14:24:26 +00:00
.SH "SEE ALSO"
2018-05-12 11:54:35 +00:00
\fI unbound\fR (8),
2012-07-04 14:24:26 +00:00
\fI unbound\- checkconf\fR (8).
.SH "AUTHORS"
2018-05-12 11:54:35 +00:00
.B Unbound
2012-07-04 14:24:26 +00:00
was written by NLnet Labs. Please see CREDITS file
in the distribution for further details.