freebsd-dev/contrib/wpa/wpa_supplicant/ibss_rsn.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

955 lines
24 KiB
C
Raw Normal View History

Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
/*
* wpa_supplicant - IBSS RSN
* Copyright (c) 2009-2013, Jouni Malinen <j@w1.fi>
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
*
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
* This software may be distributed under the terms of the BSD license.
* See README for more details.
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
*/
#include "includes.h"
#include "common.h"
#include "common/wpa_ctrl.h"
#include "utils/eloop.h"
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#include "l2_packet/l2_packet.h"
#include "rsn_supp/wpa.h"
#include "rsn_supp/wpa_ie.h"
#include "ap/wpa_auth.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "common/ieee802_11_defs.h"
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#include "ibss_rsn.h"
static void ibss_rsn_auth_timeout(void *eloop_ctx, void *timeout_ctx);
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
static struct ibss_rsn_peer * ibss_rsn_get_peer(struct ibss_rsn *ibss_rsn,
const u8 *addr)
{
struct ibss_rsn_peer *peer;
for (peer = ibss_rsn->peers; peer; peer = peer->next)
if (os_memcmp(addr, peer->addr, ETH_ALEN) == 0)
break;
return peer;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static void ibss_rsn_free(struct ibss_rsn_peer *peer)
{
eloop_cancel_timeout(ibss_rsn_auth_timeout, peer, NULL);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_auth_sta_deinit(peer->auth);
wpa_sm_deinit(peer->supp);
os_free(peer);
}
static void supp_set_state(void *ctx, enum wpa_states state)
{
struct ibss_rsn_peer *peer = ctx;
peer->supp_state = state;
}
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
static enum wpa_states supp_get_state(void *ctx)
{
struct ibss_rsn_peer *peer = ctx;
return peer->supp_state;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static int supp_ether_send(void *ctx, const u8 *dest, u16 proto, const u8 *buf,
size_t len)
{
struct ibss_rsn_peer *peer = ctx;
struct wpa_supplicant *wpa_s = peer->ibss_rsn->wpa_s;
int encrypt = peer->authentication_status & IBSS_RSN_REPORTED_PTK;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_printf(MSG_DEBUG, "SUPP: %s(dest=" MACSTR
" proto=0x%04x len=%lu no_encrypt=%d)",
__func__, MAC2STR(dest), proto, (unsigned long) len,
!encrypt);
if (wpa_s->drv_flags & WPA_DRIVER_FLAGS_CONTROL_PORT)
return wpa_drv_tx_control_port(wpa_s, dest, proto, buf, len,
!encrypt);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (wpa_s->l2)
return l2_packet_send(wpa_s->l2, dest, proto, buf, len);
return -1;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
static u8 * supp_alloc_eapol(void *ctx, u8 type, const void *data,
u16 data_len, size_t *msg_len, void **data_pos)
{
struct ieee802_1x_hdr *hdr;
wpa_printf(MSG_DEBUG, "SUPP: %s(type=%d data_len=%d)",
__func__, type, data_len);
*msg_len = sizeof(*hdr) + data_len;
hdr = os_malloc(*msg_len);
if (hdr == NULL)
return NULL;
hdr->version = 2;
hdr->type = type;
hdr->length = host_to_be16(data_len);
if (data)
os_memcpy(hdr + 1, data, data_len);
else
os_memset(hdr + 1, 0, data_len);
if (data_pos)
*data_pos = hdr + 1;
return (u8 *) hdr;
}
static int supp_get_beacon_ie(void *ctx)
{
struct ibss_rsn_peer *peer = ctx;
wpa_printf(MSG_DEBUG, "SUPP: %s", __func__);
/* TODO: get correct RSN IE */
wpa_sm_set_ap_rsnxe(peer->supp, NULL, 0);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return wpa_sm_set_ap_rsn_ie(peer->supp,
(u8 *) "\x30\x14\x01\x00"
"\x00\x0f\xac\x04"
"\x01\x00\x00\x0f\xac\x04"
"\x01\x00\x00\x0f\xac\x02"
"\x00\x00", 22);
}
static void ibss_check_rsn_completed(struct ibss_rsn_peer *peer)
{
struct wpa_supplicant *wpa_s = peer->ibss_rsn->wpa_s;
if ((peer->authentication_status &
(IBSS_RSN_SET_PTK_SUPP | IBSS_RSN_SET_PTK_AUTH)) !=
(IBSS_RSN_SET_PTK_SUPP | IBSS_RSN_SET_PTK_AUTH))
return;
if (peer->authentication_status & IBSS_RSN_REPORTED_PTK)
return;
peer->authentication_status |= IBSS_RSN_REPORTED_PTK;
wpa_msg(wpa_s, MSG_INFO, IBSS_RSN_COMPLETED MACSTR,
MAC2STR(peer->addr));
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static int supp_set_key(void *ctx, enum wpa_alg alg,
const u8 *addr, int key_idx, int set_tx,
const u8 *seq, size_t seq_len,
const u8 *key, size_t key_len, enum key_flag key_flag)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct ibss_rsn_peer *peer = ctx;
wpa_printf(MSG_DEBUG, "SUPP: %s(alg=%d addr=" MACSTR " key_idx=%d "
"set_tx=%d)",
__func__, alg, MAC2STR(addr), key_idx, set_tx);
wpa_hexdump(MSG_DEBUG, "SUPP: set_key - seq", seq, seq_len);
wpa_hexdump_key(MSG_DEBUG, "SUPP: set_key - key", key, key_len);
if (key_idx == 0) {
peer->authentication_status |= IBSS_RSN_SET_PTK_SUPP;
ibss_check_rsn_completed(peer);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
/*
* In IBSS RSN, the pairwise key from the 4-way handshake
* initiated by the peer with highest MAC address is used.
*/
if (os_memcmp(peer->ibss_rsn->wpa_s->own_addr, peer->addr,
ETH_ALEN) > 0) {
wpa_printf(MSG_DEBUG, "SUPP: Do not use this PTK");
return 0;
}
}
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
if (is_broadcast_ether_addr(addr))
addr = peer->addr;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return wpa_drv_set_key(peer->ibss_rsn->wpa_s, alg, addr, key_idx,
set_tx, seq, seq_len, key, key_len, key_flag);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
static void * supp_get_network_ctx(void *ctx)
{
struct ibss_rsn_peer *peer = ctx;
return wpa_supplicant_get_ssid(peer->ibss_rsn->wpa_s);
}
static int supp_mlme_setprotection(void *ctx, const u8 *addr,
int protection_type, int key_type)
{
wpa_printf(MSG_DEBUG, "SUPP: %s(addr=" MACSTR " protection_type=%d "
"key_type=%d)",
__func__, MAC2STR(addr), protection_type, key_type);
return 0;
}
static void supp_cancel_auth_timeout(void *ctx)
{
wpa_printf(MSG_DEBUG, "SUPP: %s", __func__);
}
static void supp_deauthenticate(void *ctx, u16 reason_code)
{
wpa_printf(MSG_DEBUG, "SUPP: %s (TODO)", __func__);
}
static void supp_reconnect(void *ctx)
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
{
wpa_printf(MSG_DEBUG, "SUPP: %s (TODO)", __func__);
}
static int ibss_rsn_supp_init(struct ibss_rsn_peer *peer, const u8 *own_addr,
const u8 *psk)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct wpa_sm_ctx *ctx = os_zalloc(sizeof(*ctx));
if (ctx == NULL)
return -1;
ctx->ctx = peer;
ctx->msg_ctx = peer->ibss_rsn->wpa_s;
ctx->set_state = supp_set_state;
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
ctx->get_state = supp_get_state;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ctx->ether_send = supp_ether_send;
ctx->get_beacon_ie = supp_get_beacon_ie;
ctx->alloc_eapol = supp_alloc_eapol;
ctx->set_key = supp_set_key;
ctx->get_network_ctx = supp_get_network_ctx;
ctx->mlme_setprotection = supp_mlme_setprotection;
ctx->cancel_auth_timeout = supp_cancel_auth_timeout;
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
ctx->deauthenticate = supp_deauthenticate;
ctx->reconnect = supp_reconnect;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
peer->supp = wpa_sm_init(ctx);
if (peer->supp == NULL) {
wpa_printf(MSG_DEBUG, "SUPP: wpa_sm_init() failed");
2017-10-18 03:44:27 +00:00
os_free(ctx);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return -1;
}
wpa_sm_set_own_addr(peer->supp, own_addr);
wpa_sm_set_param(peer->supp, WPA_PARAM_RSN_ENABLED, 1);
wpa_sm_set_param(peer->supp, WPA_PARAM_PROTO, WPA_PROTO_RSN);
wpa_sm_set_param(peer->supp, WPA_PARAM_PAIRWISE, WPA_CIPHER_CCMP);
wpa_sm_set_param(peer->supp, WPA_PARAM_GROUP, WPA_CIPHER_CCMP);
wpa_sm_set_param(peer->supp, WPA_PARAM_KEY_MGMT, WPA_KEY_MGMT_PSK);
2017-10-18 03:44:27 +00:00
wpa_sm_set_pmk(peer->supp, psk, PMK_LEN, NULL, NULL);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
peer->supp_ie_len = sizeof(peer->supp_ie);
if (wpa_sm_set_assoc_wpa_ie_default(peer->supp, peer->supp_ie,
&peer->supp_ie_len) < 0) {
wpa_printf(MSG_DEBUG, "SUPP: wpa_sm_set_assoc_wpa_ie_default()"
" failed");
return -1;
}
wpa_sm_notify_assoc(peer->supp, peer->addr);
return 0;
}
static void auth_logger(void *ctx, const u8 *addr, logger_level level,
const char *txt)
{
if (addr)
wpa_printf(MSG_DEBUG, "AUTH: " MACSTR " - %s",
MAC2STR(addr), txt);
else
wpa_printf(MSG_DEBUG, "AUTH: %s", txt);
}
static const u8 * auth_get_psk(void *ctx, const u8 *addr,
2018-12-06 05:04:28 +00:00
const u8 *p2p_dev_addr, const u8 *prev_psk,
2019-04-22 15:42:53 +00:00
size_t *psk_len, int *vlan_id)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct ibss_rsn *ibss_rsn = ctx;
2018-12-06 05:04:28 +00:00
if (psk_len)
*psk_len = PMK_LEN;
2019-04-22 15:42:53 +00:00
if (vlan_id)
*vlan_id = 0;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_printf(MSG_DEBUG, "AUTH: %s (addr=" MACSTR " prev_psk=%p)",
__func__, MAC2STR(addr), prev_psk);
if (prev_psk)
return NULL;
return ibss_rsn->psk;
}
static int auth_send_eapol(void *ctx, const u8 *addr, const u8 *data,
size_t data_len, int encrypt)
{
struct ibss_rsn *ibss_rsn = ctx;
struct wpa_supplicant *wpa_s = ibss_rsn->wpa_s;
wpa_printf(MSG_DEBUG, "AUTH: %s(addr=" MACSTR " data_len=%lu "
"encrypt=%d)",
__func__, MAC2STR(addr), (unsigned long) data_len, encrypt);
if (wpa_s->drv_flags & WPA_DRIVER_FLAGS_CONTROL_PORT)
return wpa_drv_tx_control_port(wpa_s, addr, ETH_P_EAPOL,
data, data_len, !encrypt);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (wpa_s->l2)
return l2_packet_send(wpa_s->l2, addr, ETH_P_EAPOL, data,
data_len);
return -1;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
static int auth_set_key(void *ctx, int vlan_id, enum wpa_alg alg,
const u8 *addr, int idx, u8 *key, size_t key_len,
enum key_flag key_flag)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct ibss_rsn *ibss_rsn = ctx;
u8 seq[6];
os_memset(seq, 0, sizeof(seq));
if (addr) {
wpa_printf(MSG_DEBUG, "AUTH: %s(alg=%d addr=" MACSTR
" key_idx=%d)",
__func__, alg, MAC2STR(addr), idx);
} else {
wpa_printf(MSG_DEBUG, "AUTH: %s(alg=%d key_idx=%d)",
__func__, alg, idx);
}
wpa_hexdump_key(MSG_DEBUG, "AUTH: set_key - key", key, key_len);
if (idx == 0) {
if (addr) {
struct ibss_rsn_peer *peer;
peer = ibss_rsn_get_peer(ibss_rsn, addr);
if (peer) {
peer->authentication_status |=
IBSS_RSN_SET_PTK_AUTH;
ibss_check_rsn_completed(peer);
}
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
/*
* In IBSS RSN, the pairwise key from the 4-way handshake
* initiated by the peer with highest MAC address is used.
*/
if (addr == NULL ||
os_memcmp(ibss_rsn->wpa_s->own_addr, addr, ETH_ALEN) < 0) {
wpa_printf(MSG_DEBUG, "AUTH: Do not use this PTK");
return 0;
}
}
return wpa_drv_set_key(ibss_rsn->wpa_s, alg, addr, idx,
1, seq, 6, key, key_len, key_flag);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
static void ibss_rsn_disconnect(void *ctx, const u8 *addr, u16 reason)
{
struct ibss_rsn *ibss_rsn = ctx;
wpa_drv_sta_deauth(ibss_rsn->wpa_s, addr, reason);
}
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
static int auth_for_each_sta(void *ctx, int (*cb)(struct wpa_state_machine *sm,
void *ctx),
void *cb_ctx)
{
struct ibss_rsn *ibss_rsn = ctx;
struct ibss_rsn_peer *peer;
wpa_printf(MSG_DEBUG, "AUTH: for_each_sta");
for (peer = ibss_rsn->peers; peer; peer = peer->next) {
if (peer->auth && cb(peer->auth, cb_ctx))
return 1;
}
return 0;
}
static void ibss_set_sta_authorized(struct ibss_rsn *ibss_rsn,
struct ibss_rsn_peer *peer, int authorized)
{
int res;
if (authorized) {
res = wpa_drv_sta_set_flags(ibss_rsn->wpa_s, peer->addr,
WPA_STA_AUTHORIZED,
WPA_STA_AUTHORIZED, ~0);
wpa_printf(MSG_DEBUG, "AUTH: " MACSTR " authorizing port",
MAC2STR(peer->addr));
} else {
res = wpa_drv_sta_set_flags(ibss_rsn->wpa_s, peer->addr,
0, 0, ~WPA_STA_AUTHORIZED);
wpa_printf(MSG_DEBUG, "AUTH: " MACSTR " unauthorizing port",
MAC2STR(peer->addr));
}
if (res && errno != ENOENT) {
wpa_printf(MSG_DEBUG, "Could not set station " MACSTR " flags "
"for kernel driver (errno=%d)",
MAC2STR(peer->addr), errno);
}
}
static void auth_set_eapol(void *ctx, const u8 *addr,
wpa_eapol_variable var, int value)
{
struct ibss_rsn *ibss_rsn = ctx;
struct ibss_rsn_peer *peer = ibss_rsn_get_peer(ibss_rsn, addr);
if (peer == NULL)
return;
switch (var) {
case WPA_EAPOL_authorized:
ibss_set_sta_authorized(ibss_rsn, peer, value);
break;
default:
/* do not handle any other event */
wpa_printf(MSG_DEBUG, "AUTH: eapol event not handled %d", var);
break;
}
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static int ibss_rsn_auth_init_group(struct ibss_rsn *ibss_rsn,
2017-10-18 03:44:27 +00:00
const u8 *own_addr, struct wpa_ssid *ssid)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct wpa_auth_config conf;
2018-12-06 05:04:28 +00:00
static const struct wpa_auth_callbacks cb = {
.logger = auth_logger,
.set_eapol = auth_set_eapol,
.send_eapol = auth_send_eapol,
.get_psk = auth_get_psk,
.set_key = auth_set_key,
.for_each_sta = auth_for_each_sta,
.disconnect = ibss_rsn_disconnect,
};
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_printf(MSG_DEBUG, "AUTH: Initializing group state machine");
os_memset(&conf, 0, sizeof(conf));
conf.wpa = 2;
conf.wpa_key_mgmt = WPA_KEY_MGMT_PSK;
conf.wpa_pairwise = WPA_CIPHER_CCMP;
conf.rsn_pairwise = WPA_CIPHER_CCMP;
conf.wpa_group = WPA_CIPHER_CCMP;
conf.eapol_version = 2;
2017-10-18 03:44:27 +00:00
conf.wpa_group_rekey = ssid->group_rekey ? ssid->group_rekey : 600;
2018-12-06 05:04:28 +00:00
conf.wpa_group_update_count = 4;
conf.wpa_pairwise_update_count = 4;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
2018-12-06 05:04:28 +00:00
ibss_rsn->auth_group = wpa_init(own_addr, &conf, &cb, ibss_rsn);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (ibss_rsn->auth_group == NULL) {
wpa_printf(MSG_DEBUG, "AUTH: wpa_init() failed");
return -1;
}
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
wpa_init_keys(ibss_rsn->auth_group);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return 0;
}
static int ibss_rsn_auth_init(struct ibss_rsn *ibss_rsn,
struct ibss_rsn_peer *peer)
{
peer->auth = wpa_auth_sta_init(ibss_rsn->auth_group, peer->addr, NULL);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (peer->auth == NULL) {
wpa_printf(MSG_DEBUG, "AUTH: wpa_auth_sta_init() failed");
return -1;
}
/* TODO: get peer RSN IE with Probe Request */
2019-04-22 15:42:53 +00:00
if (wpa_validate_wpa_ie(ibss_rsn->auth_group, peer->auth, 0,
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
(u8 *) "\x30\x14\x01\x00"
"\x00\x0f\xac\x04"
"\x01\x00\x00\x0f\xac\x04"
"\x01\x00\x00\x0f\xac\x02"
"\x00\x00", 22, NULL, 0, NULL, 0, NULL, 0) !=
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
WPA_IE_OK) {
wpa_printf(MSG_DEBUG, "AUTH: wpa_validate_wpa_ie() failed");
return -1;
}
if (wpa_auth_sm_event(peer->auth, WPA_ASSOC))
return -1;
if (wpa_auth_sta_associated(ibss_rsn->auth_group, peer->auth))
return -1;
return 0;
}
static int ibss_rsn_send_auth(struct ibss_rsn *ibss_rsn, const u8 *da, int seq)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct ieee80211_mgmt auth;
const size_t auth_length = IEEE80211_HDRLEN + sizeof(auth.u.auth);
struct wpa_supplicant *wpa_s = ibss_rsn->wpa_s;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
os_memset(&auth, 0, sizeof(auth));
auth.frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
WLAN_FC_STYPE_AUTH);
os_memcpy(auth.da, da, ETH_ALEN);
os_memcpy(auth.sa, wpa_s->own_addr, ETH_ALEN);
os_memcpy(auth.bssid, wpa_s->bssid, ETH_ALEN);
auth.u.auth.auth_alg = host_to_le16(WLAN_AUTH_OPEN);
auth.u.auth.auth_transaction = host_to_le16(seq);
auth.u.auth.status_code = host_to_le16(WLAN_STATUS_SUCCESS);
wpa_printf(MSG_DEBUG, "RSN: IBSS TX Auth frame (SEQ %d) to " MACSTR,
seq, MAC2STR(da));
return wpa_drv_send_mlme(wpa_s, (u8 *) &auth, auth_length, 0, 0, 0);
}
static int ibss_rsn_is_auth_started(struct ibss_rsn_peer * peer)
{
return peer->authentication_status &
(IBSS_RSN_AUTH_BY_US | IBSS_RSN_AUTH_EAPOL_BY_US);
}
static struct ibss_rsn_peer *
ibss_rsn_peer_init(struct ibss_rsn *ibss_rsn, const u8 *addr)
{
struct ibss_rsn_peer *peer;
if (ibss_rsn == NULL)
return NULL;
peer = ibss_rsn_get_peer(ibss_rsn, addr);
if (peer) {
wpa_printf(MSG_DEBUG, "RSN: IBSS Supplicant for peer "MACSTR
" already running", MAC2STR(addr));
return peer;
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
}
wpa_printf(MSG_DEBUG, "RSN: Starting IBSS Supplicant for peer "MACSTR,
MAC2STR(addr));
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
peer = os_zalloc(sizeof(*peer));
if (peer == NULL) {
wpa_printf(MSG_DEBUG, "RSN: Could not allocate memory.");
return NULL;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
peer->ibss_rsn = ibss_rsn;
os_memcpy(peer->addr, addr, ETH_ALEN);
peer->authentication_status = IBSS_RSN_AUTH_NOT_AUTHENTICATED;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (ibss_rsn_supp_init(peer, ibss_rsn->wpa_s->own_addr,
ibss_rsn->psk) < 0) {
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ibss_rsn_free(peer);
return NULL;
}
peer->next = ibss_rsn->peers;
ibss_rsn->peers = peer;
return peer;
}
static void ibss_rsn_auth_timeout(void *eloop_ctx, void *timeout_ctx)
{
struct ibss_rsn_peer *peer = eloop_ctx;
/*
* Assume peer does not support Authentication exchange or the frame was
* lost somewhere - start EAPOL Authenticator.
*/
wpa_printf(MSG_DEBUG,
"RSN: Timeout on waiting Authentication frame response from "
MACSTR " - start authenticator", MAC2STR(peer->addr));
peer->authentication_status |= IBSS_RSN_AUTH_BY_US;
ibss_rsn_auth_init(peer->ibss_rsn, peer);
}
int ibss_rsn_start(struct ibss_rsn *ibss_rsn, const u8 *addr)
{
struct ibss_rsn_peer *peer;
int res;
if (!ibss_rsn)
return -1;
/* if the peer already exists, exit immediately */
peer = ibss_rsn_get_peer(ibss_rsn, addr);
if (peer)
return 0;
peer = ibss_rsn_peer_init(ibss_rsn, addr);
if (peer == NULL)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return -1;
/* Open Authentication: send first Authentication frame */
res = ibss_rsn_send_auth(ibss_rsn, addr, 1);
if (res) {
/*
* The driver may not support Authentication frame exchange in
* IBSS. Ignore authentication and go through EAPOL exchange.
*/
peer->authentication_status |= IBSS_RSN_AUTH_BY_US;
return ibss_rsn_auth_init(ibss_rsn, peer);
} else {
os_get_reltime(&peer->own_auth_tx);
eloop_register_timeout(1, 0, ibss_rsn_auth_timeout, peer, NULL);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
return 0;
}
static int ibss_rsn_peer_authenticated(struct ibss_rsn *ibss_rsn,
struct ibss_rsn_peer *peer, int reason)
{
int already_started;
if (ibss_rsn == NULL || peer == NULL)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return -1;
already_started = ibss_rsn_is_auth_started(peer);
peer->authentication_status |= reason;
if (already_started) {
wpa_printf(MSG_DEBUG, "RSN: IBSS Authenticator already "
"started for peer " MACSTR, MAC2STR(peer->addr));
return 0;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
wpa_printf(MSG_DEBUG, "RSN: Starting IBSS Authenticator "
"for now-authenticated peer " MACSTR, MAC2STR(peer->addr));
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return ibss_rsn_auth_init(ibss_rsn, peer);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
void ibss_rsn_stop(struct ibss_rsn *ibss_rsn, const u8 *peermac)
{
struct ibss_rsn_peer *peer, *prev;
if (ibss_rsn == NULL)
return;
if (peermac == NULL) {
/* remove all peers */
wpa_printf(MSG_DEBUG, "%s: Remove all peers", __func__);
peer = ibss_rsn->peers;
while (peer) {
prev = peer;
peer = peer->next;
ibss_rsn_free(prev);
ibss_rsn->peers = peer;
}
} else {
/* remove specific peer */
wpa_printf(MSG_DEBUG, "%s: Remove specific peer " MACSTR,
__func__, MAC2STR(peermac));
for (prev = NULL, peer = ibss_rsn->peers; peer != NULL;
prev = peer, peer = peer->next) {
if (os_memcmp(peermac, peer->addr, ETH_ALEN) == 0) {
if (prev == NULL)
ibss_rsn->peers = peer->next;
else
prev->next = peer->next;
ibss_rsn_free(peer);
wpa_printf(MSG_DEBUG, "%s: Successfully "
"removed a specific peer",
__func__);
break;
}
}
}
}
2017-10-18 03:44:27 +00:00
struct ibss_rsn * ibss_rsn_init(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
{
struct ibss_rsn *ibss_rsn;
ibss_rsn = os_zalloc(sizeof(*ibss_rsn));
if (ibss_rsn == NULL)
return NULL;
ibss_rsn->wpa_s = wpa_s;
2017-10-18 03:44:27 +00:00
if (ibss_rsn_auth_init_group(ibss_rsn, wpa_s->own_addr, ssid) < 0) {
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ibss_rsn_deinit(ibss_rsn);
return NULL;
}
return ibss_rsn;
}
void ibss_rsn_deinit(struct ibss_rsn *ibss_rsn)
{
struct ibss_rsn_peer *peer, *prev;
if (ibss_rsn == NULL)
return;
peer = ibss_rsn->peers;
while (peer) {
prev = peer;
peer = peer->next;
ibss_rsn_free(prev);
}
if (ibss_rsn->auth_group)
wpa_deinit(ibss_rsn->auth_group);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
os_free(ibss_rsn);
}
static int ibss_rsn_eapol_dst_supp(const u8 *buf, size_t len)
{
const struct ieee802_1x_hdr *hdr;
const struct wpa_eapol_key *key;
u16 key_info;
size_t plen;
/* TODO: Support other EAPOL packets than just EAPOL-Key */
if (len < sizeof(*hdr) + sizeof(*key))
return -1;
hdr = (const struct ieee802_1x_hdr *) buf;
key = (const struct wpa_eapol_key *) (hdr + 1);
plen = be_to_host16(hdr->length);
if (hdr->version < EAPOL_VERSION) {
/* TODO: backwards compatibility */
}
if (hdr->type != IEEE802_1X_TYPE_EAPOL_KEY) {
wpa_printf(MSG_DEBUG, "RSN: EAPOL frame (type %u) discarded, "
"not a Key frame", hdr->type);
return -1;
}
if (plen > len - sizeof(*hdr) || plen < sizeof(*key)) {
wpa_printf(MSG_DEBUG, "RSN: EAPOL frame payload size %lu "
"invalid (frame size %lu)",
(unsigned long) plen, (unsigned long) len);
return -1;
}
if (key->type != EAPOL_KEY_TYPE_RSN) {
wpa_printf(MSG_DEBUG, "RSN: EAPOL-Key type (%d) unknown, "
"discarded", key->type);
return -1;
}
key_info = WPA_GET_BE16(key->key_info);
return !!(key_info & WPA_KEY_INFO_ACK);
}
static int ibss_rsn_process_rx_eapol(struct ibss_rsn *ibss_rsn,
struct ibss_rsn_peer *peer,
const u8 *buf, size_t len)
{
int supp;
u8 *tmp;
supp = ibss_rsn_eapol_dst_supp(buf, len);
if (supp < 0)
return -1;
2018-12-06 05:04:28 +00:00
tmp = os_memdup(buf, len);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (tmp == NULL)
return -1;
if (supp) {
peer->authentication_status |= IBSS_RSN_AUTH_EAPOL_BY_PEER;
wpa_printf(MSG_DEBUG, "RSN: IBSS RX EAPOL for Supplicant from "
MACSTR, MAC2STR(peer->addr));
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_sm_rx_eapol(peer->supp, peer->addr, tmp, len);
} else {
if (ibss_rsn_is_auth_started(peer) == 0) {
wpa_printf(MSG_DEBUG, "RSN: IBSS EAPOL for "
"Authenticator dropped as " MACSTR " is not "
"authenticated", MAC2STR(peer->addr));
os_free(tmp);
return -1;
}
wpa_printf(MSG_DEBUG, "RSN: IBSS RX EAPOL for Authenticator "
"from "MACSTR, MAC2STR(peer->addr));
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_receive(ibss_rsn->auth_group, peer->auth, tmp, len);
}
os_free(tmp);
return 1;
}
int ibss_rsn_rx_eapol(struct ibss_rsn *ibss_rsn, const u8 *src_addr,
const u8 *buf, size_t len)
{
struct ibss_rsn_peer *peer;
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
if (ibss_rsn == NULL)
return -1;
peer = ibss_rsn_get_peer(ibss_rsn, src_addr);
if (peer)
return ibss_rsn_process_rx_eapol(ibss_rsn, peer, buf, len);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (ibss_rsn_eapol_dst_supp(buf, len) > 0) {
/*
* Create new IBSS peer based on an EAPOL message from the peer
* Authenticator.
*/
peer = ibss_rsn_peer_init(ibss_rsn, src_addr);
if (peer == NULL)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return -1;
/* assume the peer is authenticated already */
wpa_printf(MSG_DEBUG, "RSN: IBSS Not using IBSS Auth for peer "
MACSTR, MAC2STR(src_addr));
ibss_rsn_peer_authenticated(ibss_rsn, peer,
IBSS_RSN_AUTH_EAPOL_BY_US);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return ibss_rsn_process_rx_eapol(ibss_rsn, ibss_rsn->peers,
buf, len);
}
return 0;
}
void ibss_rsn_set_psk(struct ibss_rsn *ibss_rsn, const u8 *psk)
{
Import wpa_supplicant / hostapd 2.0. 2013-01-12 - v2.0 * added AP-STA-DISCONNECTED ctrl_iface event * improved debug logging (human readable event names, interface name included in more entries) * added number of small changes to make it easier for static analyzers to understand the implementation * added a workaround for Windows 7 Michael MIC failure reporting and use of the Secure bit in EAPOL-Key msg 3/4 * fixed number of small bugs (see git logs for more details) * changed OpenSSL to read full certificate chain from server_cert file * nl80211: number of updates to use new cfg80211/nl80211 functionality - replace monitor interface with nl80211 commands - additional information for driver-based AP SME * EAP-pwd: - fix KDF for group 21 and zero-padding - added support for fragmentation - increased maximum number of hunting-and-pecking iterations * avoid excessive Probe Response retries for broadcast Probe Request frames (only with drivers using hostapd SME/MLME) * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) * fixed WPS operation stopping on dual concurrent AP * added wps_rf_bands configuration parameter for overriding RF Bands value for WPS * added support for getting per-device PSK from RADIUS Tunnel-Password * added support for libnl 3.2 and newer * increased initial group key handshake retransmit timeout to 500 ms * added a workaround for 4-way handshake to update SNonce even after having sent EAPOL-Key 3/4 to avoid issues with some supplicant implementations that can change SNonce for each EAP-Key 2/4 * added a workaround for EAPOL-Key 4/4 using incorrect type value in WPA2 mode (some deployed stations use WPA type in that message) * added a WPS workaround for mixed mode AP Settings with Windows 7 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 consecutive failures in addition to using the exponential lockout period * added support for WFA Hotspot 2.0 - GAS/ANQP advertisement of network information - disable_dgaf parameter to disable downstream group-addressed forwarding * simplified licensing terms by selecting the BSD license as the only alternative * EAP-SIM: fixed re-authentication not to update pseudonym * EAP-SIM: use Notification round before EAP-Failure * EAP-AKA: added support for AT_COUNTER_TOO_SMALL * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized * EAP-AKA': fixed identity for MK derivation * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this breaks interoperability with older versions * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id * changed ANonce to be a random number instead of Counter-based * added support for canceling WPS operations with hostapd_cli wps_cancel * fixed EAP/WPS to PSK transition on reassociation in cases where deauthentication is missed * hlr_auc_gw enhancements: - a new command line parameter -u can be used to enable updating of SQN in Milenage file - use 5 bit IND for SQN updates - SQLite database can now be used to store Milenage information * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms and reauth data * added support for Chargeable-User-Identity (RFC 4372) * added radius_auth_req_attr and radius_acct_req_attr configuration parameters to allow adding/overriding of RADIUS attributes in Access-Request and Accounting-Request packets * added support for RADIUS dynamic authorization server (RFC 5176) * added initial support for WNM operations - BSS max idle period - WNM-Sleep Mode * added new WPS NFC ctrl_iface mechanism - removed obsoleted WPS_OOB command (including support for deprecated UFD config_method) * added FT support for drivers that implement MLME internally * added SA Query support for drivers that implement MLME internally * removed default ACM=1 from AC_VO and AC_VI * changed VENDOR-TEST EAP method to use proper private enterprise number (this will not interoperate with older versions) * added hostapd.conf parameter vendor_elements to allow arbitrary vendor specific elements to be added to the Beacon and Probe Response frames * added support for configuring GCMP cipher for IEEE 802.11ad * added support for 256-bit AES with internal TLS implementation * changed EAPOL transmission to use AC_VO if WMM is active * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length correctly; invalid messages could have caused the hostapd process to terminate before this fix [CVE-2012-4445] * limit number of active wildcard PINs for WPS Registrar to one to avoid confusing behavior with multiple wildcard PINs * added a workaround for WPS PBC session overlap detection to avoid interop issues with deployed station implementations that do not remove active PBC indication from Probe Request frames properly * added support for using SQLite for the eap_user database * added Acct-Session-Id attribute into Access-Request messages * fixed EAPOL frame transmission to non-QoS STAs with nl80211 (do not send QoS frames if the STA did not negotiate use of QoS for this association) 2012-05-10 - v1.0 * Add channel selection support in hostapd. See hostapd.conf. * Add support for IEEE 802.11v Time Advertisement mechanism with UTC TSF offset. See hostapd.conf for config info. * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. This allows the driver to use PS buffering of Deauthentication and Disassociation frames when the STA is in power save sleep. Only available with drivers that provide TX status events for Deauth/ Disassoc frames (nl80211). * Allow PMKSA caching to be disabled on the Authenticator. See hostap.conf config parameter disable_pmksa_caching. * atheros: Add support for IEEE 802.11w configuration. * bsd: Add support for setting HT values in IFM_MMASK. * Allow client isolation to be configured with ap_isolate. Client isolation can be used to prevent low-level bridging of frames between associated stations in the BSS. By default, this bridging is allowed. * Allow coexistance of HT BSSes with WEP/TKIP BSSes. * Add require_ht config parameter, which can be used to configure hostapd to reject association with any station that does not support HT PHY. * Add support for writing debug log to a file using "-f" option. Also add relog CLI command to re-open the log file. * Add bridge handling for WDS STA interfaces. By default they are added to the configured bridge of the AP interface (if present), but the user can also specify a separate bridge using cli command wds_bridge. * hostapd_cli: - Add wds_bridge command for specifying bridge for WDS STA interfaces. - Add relog command for reopening log file. - Send AP-STA-DISCONNECTED event when an AP disconnects a station due to inactivity. - Add wps_config ctrl_interface command for configuring AP. This command can be used to configure the AP using the internal WPS registrar. It works in the same way as new AP settings received from an ER. - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. - Add command get version, that returns hostapd version string. * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. Use hostapd_cli ess_disassoc (STA addr) (URL) to send the notification to the STA. * Allow AP mode to disconnect STAs based on low ACK condition (when the data connection is not working properly, e.g., due to the STA going outside the range of the AP). Disabled by default, enable by config option disassoc_low_ack. * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad config file. * WPS: - Send AP Settings as a wrapped Credential attribute to ctrl_iface in WPS-NEW-AP-SETTINGS. - Dispatch more WPS events through hostapd ctrl_iface. - Add mechanism for indicating non-standard WPS errors. - Change concurrent radio AP to use only one WPS UPnP instance. - Add wps_check_pin command for processing PIN from user input. UIs can use this command to process a PIN entered by a user and to validate the checksum digit (if present). - Add hostap_cli get_config command to display current AP config. - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at runtime and support dynamic AP PIN management. - Disable AP PIN after 10 consecutive failures. Slow down attacks on failures up to 10. - Allow AP to start in Enrollee mode without AP PIN for probing, to be compatible with Windows 7. - Add Config Error into WPS-FAIL events to provide more info to the user on how to resolve the issue. - When controlling multiple interfaces: - apply WPS commands to all interfaces configured to use WPS - apply WPS config changes to all interfaces that use WPS - when an attack is detected on any interface, disable AP PIN on all interfaces * WPS ER: - Show SetSelectedRegistrar events as ctrl_iface events. - Add special AP Setup Locked mode to allow read only ER. ap_setup_locked=2 can now be used to enable a special mode where WPS ER can learn the current AP settings, but cannot change them. * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool for testing protocol extensibility. - Add build option CONFIG_WPS_STRICT to allow disabling of WPS workarounds. - Add support for AuthorizedMACs attribute. * TDLS: - Allow TDLS use or TDLS channel switching in the BSS to be prohibited in the BSS, using config params tdls_prohibit and tdls_prohibit_chan_switch. * EAP server: Add support for configuring fragment size (see fragment_size in hostapd.conf). * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. wlantest can be used to capture frames from a monitor interface for realtime capturing or from pcap files for offline analysis. * Interworking: Support added for 802.11u. Enable in .config with CONFIG_INTERWORKING. See hostapd.conf for config parameters for interworking. * Android: Add build and runtime support for Android hostapd. * Add a new debug message level for excessive information. Use -ddd to enable. * TLS: Add support for tls_disable_time_checks=1 in client mode. * Internal TLS: - Add support for TLS v1.1 (RFC 4346). Enable with build parameter CONFIG_TLSV11. - Add domainComponent parser for X.509 names * Reorder some IEs to get closer to IEEE 802.11 standard. Move WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. Move HT IEs to be later in (Re)Assoc Resp. * Many bugfixes.
2013-06-25 02:47:41 +00:00
if (ibss_rsn == NULL)
return;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
os_memcpy(ibss_rsn->psk, psk, PMK_LEN);
}
static void ibss_rsn_handle_auth_1_of_2(struct ibss_rsn *ibss_rsn,
struct ibss_rsn_peer *peer,
const u8* addr)
{
wpa_printf(MSG_DEBUG, "RSN: IBSS RX Auth frame (SEQ 1) from " MACSTR,
MAC2STR(addr));
2018-12-06 05:04:28 +00:00
if (peer &&
peer->authentication_status & (IBSS_RSN_SET_PTK_SUPP |
IBSS_RSN_SET_PTK_AUTH)) {
/* Clear the TK for this pair to allow recovery from the case
* where the peer STA has restarted and lost its key while we
* still have a pairwise key configured. */
wpa_printf(MSG_DEBUG, "RSN: Clear pairwise key for peer "
MACSTR, MAC2STR(addr));
wpa_drv_set_key(ibss_rsn->wpa_s, WPA_ALG_NONE, addr, 0, 0,
NULL, 0, NULL, 0, KEY_FLAG_PAIRWISE);
2018-12-06 05:04:28 +00:00
}
if (peer &&
peer->authentication_status & IBSS_RSN_AUTH_EAPOL_BY_PEER) {
if (peer->own_auth_tx.sec) {
struct os_reltime now, diff;
os_get_reltime(&now);
os_reltime_sub(&now, &peer->own_auth_tx, &diff);
if (diff.sec == 0 && diff.usec < 500000) {
wpa_printf(MSG_DEBUG, "RSN: Skip IBSS reinit since only %u usec from own Auth frame TX",
(int) diff.usec);
goto skip_reinit;
}
}
/*
* A peer sent us an Authentication frame even though it already
* started an EAPOL session. We should reinit state machines
* here, but it's much more complicated than just deleting and
* recreating the state machine
*/
wpa_printf(MSG_DEBUG, "RSN: IBSS Reinitializing station "
MACSTR, MAC2STR(addr));
ibss_rsn_stop(ibss_rsn, addr);
peer = NULL;
}
if (!peer) {
peer = ibss_rsn_peer_init(ibss_rsn, addr);
if (!peer)
return;
wpa_printf(MSG_DEBUG, "RSN: IBSS Auth started by peer " MACSTR,
MAC2STR(addr));
}
skip_reinit:
/* reply with an Authentication frame now, before sending an EAPOL */
ibss_rsn_send_auth(ibss_rsn, addr, 2);
/* no need to start another AUTH challenge in the other way.. */
ibss_rsn_peer_authenticated(ibss_rsn, peer, IBSS_RSN_AUTH_EAPOL_BY_US);
}
void ibss_rsn_handle_auth(struct ibss_rsn *ibss_rsn, const u8 *auth_frame,
size_t len)
{
const struct ieee80211_mgmt *header;
struct ibss_rsn_peer *peer;
size_t auth_length;
header = (const struct ieee80211_mgmt *) auth_frame;
auth_length = IEEE80211_HDRLEN + sizeof(header->u.auth);
if (ibss_rsn == NULL || len < auth_length)
return;
if (le_to_host16(header->u.auth.auth_alg) != WLAN_AUTH_OPEN ||
le_to_host16(header->u.auth.status_code) != WLAN_STATUS_SUCCESS)
return;
peer = ibss_rsn_get_peer(ibss_rsn, header->sa);
switch (le_to_host16(header->u.auth.auth_transaction)) {
case 1:
ibss_rsn_handle_auth_1_of_2(ibss_rsn, peer, header->sa);
break;
case 2:
wpa_printf(MSG_DEBUG, "RSN: IBSS RX Auth frame (SEQ 2) from "
MACSTR, MAC2STR(header->sa));
if (!peer) {
wpa_printf(MSG_DEBUG, "RSN: Received Auth seq 2 from "
"unknown STA " MACSTR, MAC2STR(header->sa));
break;
}
/* authentication has been completed */
eloop_cancel_timeout(ibss_rsn_auth_timeout, peer, NULL);
wpa_printf(MSG_DEBUG, "RSN: IBSS Auth completed with " MACSTR,
MAC2STR(header->sa));
ibss_rsn_peer_authenticated(ibss_rsn, peer,
IBSS_RSN_AUTH_BY_US);
break;
}
}