freebsd-dev/usr.bin/netstat/inet.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1546 lines
50 KiB
C
Raw Normal View History

/*-
1996-01-14 23:33:13 +00:00
* Copyright (c) 1983, 1988, 1993, 1995
1994-05-27 12:33:43 +00:00
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-27 12:33:43 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
1994-05-27 12:33:43 +00:00
#ifndef lint
1996-01-14 23:33:13 +00:00
static char sccsid[] = "@(#)inet.c 8.5 (Berkeley) 5/24/95";
1994-05-27 12:33:43 +00:00
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-27 12:33:43 +00:00
#include <sys/param.h>
#include <sys/queue.h>
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
#include <sys/domain.h>
2008-07-29 21:20:03 +00:00
#include <sys/protosw.h>
1994-05-27 12:33:43 +00:00
#include <sys/socket.h>
#define _WANT_SOCKET
1994-05-27 12:33:43 +00:00
#include <sys/socketvar.h>
#include <sys/sysctl.h>
1994-05-27 12:33:43 +00:00
#include <net/route.h>
#include <net/if_arp.h>
1994-05-27 12:33:43 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_carp.h>
#ifdef INET6
#include <netinet/ip6.h>
#endif /* INET6 */
1994-05-27 12:33:43 +00:00
#include <netinet/in_pcb.h>
#include <netinet/ip_icmp.h>
#include <netinet/icmp_var.h>
#include <netinet/igmp_var.h>
#include <netinet/ip_divert.h>
1994-05-27 12:33:43 +00:00
#include <netinet/ip_var.h>
#include <netinet/pim_var.h>
1994-05-27 12:33:43 +00:00
#include <netinet/tcp.h>
#include <netinet/tcpip.h>
#include <netinet/tcp_seq.h>
#define TCPSTATES
1994-05-27 12:33:43 +00:00
#include <netinet/tcp_fsm.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <arpa/inet.h>
#include <err.h>
#include <errno.h>
#include <libutil.h>
1994-05-27 12:33:43 +00:00
#include <netdb.h>
#include <stdint.h>
1994-05-27 12:33:43 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
1994-05-27 12:33:43 +00:00
#include <string.h>
#include <unistd.h>
#include <libxo/xo.h>
1994-05-27 12:33:43 +00:00
#include "netstat.h"
#include "nl_defs.h"
1994-05-27 12:33:43 +00:00
#define max(a, b) (((a) > (b)) ? (a) : (b))
#ifdef INET
static void inetprint(const char *, struct in_addr *, int, const char *, int,
const int);
#endif
#ifdef INET6
static int udp_done, tcp_done, sdp_done;
#endif /* INET6 */
1994-05-27 12:33:43 +00:00
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
static int
pcblist_sysctl(int proto, const char *name, char **bufp)
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{
const char *mibvar;
char *buf;
size_t len;
switch (proto) {
case IPPROTO_TCP:
mibvar = "net.inet.tcp.pcblist";
break;
case IPPROTO_UDP:
mibvar = "net.inet.udp.pcblist";
break;
default:
mibvar = "net.inet.raw.pcblist";
break;
}
if (strncmp(name, "sdp", 3) == 0)
mibvar = "net.inet.sdp.pcblist";
else if (strncmp(name, "divert", 6) == 0)
mibvar = "net.inet.divert.pcblist";
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
len = 0;
if (sysctlbyname(mibvar, 0, &len, 0, 0) < 0) {
if (errno != ENOENT)
xo_warn("sysctl: %s", mibvar);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return (0);
}
if ((buf = malloc(len)) == NULL) {
xo_warnx("malloc %lu bytes", (u_long)len);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return (0);
}
if (sysctlbyname(mibvar, buf, &len, 0, 0) < 0) {
xo_warn("sysctl: %s", mibvar);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
free(buf);
return (0);
}
*bufp = buf;
return (1);
}
/*
* Copied directly from uipc_socket2.c. We leave out some fields that are in
* nested structures that aren't used to avoid extra work.
*/
static void
sbtoxsockbuf(struct sockbuf *sb, struct xsockbuf *xsb)
{
Merge from projects/sendfile: o Introduce a notion of "not ready" mbufs in socket buffers. These mbufs are now being populated by some I/O in background and are referenced outside. This forces following implications: - An mbuf which is "not ready" can't be taken out of the buffer. - An mbuf that is behind a "not ready" in the queue neither. - If sockbet buffer is flushed, then "not ready" mbufs shouln't be freed. o In struct sockbuf the sb_cc field is split into sb_ccc and sb_acc. The sb_ccc stands for ""claimed character count", or "committed character count". And the sb_acc is "available character count". Consumers of socket buffer API shouldn't already access them directly, but use sbused() and sbavail() respectively. o Not ready mbufs are marked with M_NOTREADY, and ready but blocked ones with M_BLOCKED. o New field sb_fnrdy points to the first not ready mbuf, to avoid linear search. o New function sbready() is provided to activate certain amount of mbufs in a socket buffer. A special note on SCTP: SCTP has its own sockbufs. Unfortunately, FreeBSD stack doesn't yet allow protocol specific sockbufs. Thus, SCTP does some hacks to make itself compatible with FreeBSD: it manages sockbufs on its own, but keeps sb_cc updated to inform the stack of amount of data in them. The new notion of "not ready" data isn't supported by SCTP. Instead, only a mechanical substitute is done: s/sb_cc/sb_ccc/. A proper solution would be to take away struct sockbuf from struct socket and allow protocols to implement their own socket buffers, like SCTP already does. This was discussed with rrs@. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2014-11-30 12:52:33 +00:00
xsb->sb_cc = sb->sb_ccc;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
xsb->sb_hiwat = sb->sb_hiwat;
xsb->sb_mbcnt = sb->sb_mbcnt;
xsb->sb_mbmax = sb->sb_mbmax;
xsb->sb_lowat = sb->sb_lowat;
xsb->sb_flags = sb->sb_flags;
xsb->sb_timeo = sb->sb_timeo;
}
int
sotoxsocket(struct socket *so, struct xsocket *xso)
{
struct protosw proto;
struct domain domain;
bzero(xso, sizeof *xso);
xso->xso_len = sizeof *xso;
xso->xso_so = (uintptr_t)so;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
xso->so_type = so->so_type;
xso->so_options = so->so_options;
xso->so_linger = so->so_linger;
xso->so_state = so->so_state;
xso->so_pcb = (uintptr_t)so->so_pcb;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (kread((uintptr_t)so->so_proto, &proto, sizeof(proto)) != 0)
return (-1);
xso->xso_protocol = proto.pr_protocol;
if (kread((uintptr_t)proto.pr_domain, &domain, sizeof(domain)) != 0)
return (-1);
xso->xso_family = domain.dom_family;
xso->so_timeo = so->so_timeo;
xso->so_error = so->so_error;
if ((so->so_options & SO_ACCEPTCONN) != 0) {
Listening sockets improvements. o Separate fields of struct socket that belong to listening from fields that belong to normal dataflow, and unionize them. This shrinks the structure a bit. - Take out selinfo's from the socket buffers into the socket. The first reason is to support braindamaged scenario when a socket is added to kevent(2) and then listen(2) is cast on it. The second reason is that there is future plan to make socket buffers pluggable, so that for a dataflow socket a socket buffer can be changed, and in this case we also want to keep same selinfos through the lifetime of a socket. - Remove struct struct so_accf. Since now listening stuff no longer affects struct socket size, just move its fields into listening part of the union. - Provide sol_upcall field and enforce that so_upcall_set() may be called only on a dataflow socket, which has buffers, and for listening sockets provide solisten_upcall_set(). o Remove ACCEPT_LOCK() global. - Add a mutex to socket, to be used instead of socket buffer lock to lock fields of struct socket that don't belong to a socket buffer. - Allow to acquire two socket locks, but the first one must belong to a listening socket. - Make soref()/sorele() to use atomic(9). This allows in some situations to do soref() without owning socket lock. There is place for improvement here, it is possible to make sorele() also to lock optionally. - Most protocols aren't touched by this change, except UNIX local sockets. See below for more information. o Reduce copy-and-paste in kernel modules that accept connections from listening sockets: provide function solisten_dequeue(), and use it in the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4), infiniband, rpc. o UNIX local sockets. - Removal of ACCEPT_LOCK() global uncovered several races in the UNIX local sockets. Most races exist around spawning a new socket, when we are connecting to a local listening socket. To cover them, we need to hold locks on both PCBs when spawning a third one. This means holding them across sonewconn(). This creates a LOR between pcb locks and unp_list_lock. - To fix the new LOR, abandon the global unp_list_lock in favor of global unp_link_lock. Indeed, separating these two locks didn't provide us any extra parralelism in the UNIX sockets. - Now call into uipc_attach() may happen with unp_link_lock hold if, we are accepting, or without unp_link_lock in case if we are just creating a socket. - Another problem in UNIX sockets is that uipc_close() basicly did nothing for a listening socket. The vnode remained opened for connections. This is fixed by removing vnode in uipc_close(). Maybe the right way would be to do it for all sockets (not only listening), simply move the vnode teardown from uipc_detach() to uipc_close()? Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D9770
2017-06-08 21:30:34 +00:00
xso->so_qlen = so->sol_qlen;
xso->so_incqlen = so->sol_incqlen;
xso->so_qlimit = so->sol_qlimit;
} else {
sbtoxsockbuf(&so->so_snd, &xso->so_snd);
sbtoxsockbuf(&so->so_rcv, &xso->so_rcv);
xso->so_oobmark = so->so_oobmark;
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return (0);
}
1994-05-27 12:33:43 +00:00
/*
* Print a summary of connections related to an Internet
* protocol. For TCP, also give state of connection.
* Listening processes (aflag) are suppressed unless the
* -a (all) flag is specified.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
protopr(u_long off, const char *name, int af1, int proto)
1994-05-27 12:33:43 +00:00
{
static int first = 1;
int istcp;
char *buf;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
const char *vchar;
struct xtcpcb *tp;
struct xinpcb *inp;
struct xinpgen *xig, *oxig;
struct xsocket *so;
int fnamelen, cnamelen;
1994-05-27 12:33:43 +00:00
istcp = 0;
switch (proto) {
case IPPROTO_TCP:
#ifdef INET6
if (strncmp(name, "sdp", 3) != 0) {
if (tcp_done != 0)
return;
else
tcp_done = 1;
} else {
if (sdp_done != 0)
return;
else
sdp_done = 1;
}
#endif
istcp = 1;
break;
case IPPROTO_UDP:
#ifdef INET6
if (udp_done != 0)
return;
else
udp_done = 1;
#endif
break;
}
if (!pcblist_sysctl(proto, name, &buf))
return;
if (cflag || Cflag) {
fnamelen = strlen("Stack");
cnamelen = strlen("CC");
oxig = xig = (struct xinpgen *)buf;
for (xig = (struct xinpgen*)((char *)xig + xig->xig_len);
xig->xig_len > sizeof(struct xinpgen);
xig = (struct xinpgen *)((char *)xig + xig->xig_len)) {
if (istcp) {
tp = (struct xtcpcb *)xig;
inp = &tp->xt_inp;
} else {
continue;
}
if (so->xso_protocol != proto)
continue;
if (inp->inp_gencnt > oxig->xig_gen)
continue;
fnamelen = max(fnamelen, (int)strlen(tp->xt_stack));
cnamelen = max(cnamelen, (int)strlen(tp->xt_cc));
}
}
oxig = xig = (struct xinpgen *)buf;
for (xig = (struct xinpgen *)((char *)xig + xig->xig_len);
xig->xig_len > sizeof(struct xinpgen);
xig = (struct xinpgen *)((char *)xig + xig->xig_len)) {
1994-05-27 12:33:43 +00:00
if (istcp) {
tp = (struct xtcpcb *)xig;
inp = &tp->xt_inp;
} else {
inp = (struct xinpcb *)xig;
1994-05-27 12:33:43 +00:00
}
so = &inp->xi_socket;
/* Ignore sockets for protocols other than the desired one. */
if (proto != 0 && so->xso_protocol != proto)
continue;
/* Ignore PCBs which were freed during copyout. */
if (inp->inp_gencnt > oxig->xig_gen)
continue;
if ((af1 == AF_INET && (inp->inp_vflag & INP_IPV4) == 0)
#ifdef INET6
|| (af1 == AF_INET6 && (inp->inp_vflag & INP_IPV6) == 0)
#endif /* INET6 */
|| (af1 == AF_UNSPEC && ((inp->inp_vflag & INP_IPV4) == 0
#ifdef INET6
2008-01-04 03:08:49 +00:00
&& (inp->inp_vflag & INP_IPV6) == 0
#endif /* INET6 */
))
)
continue;
if (!aflag &&
(
(istcp && tp->t_state == TCPS_LISTEN)
|| (af1 == AF_INET &&
inp->inp_laddr.s_addr == INADDR_ANY)
#ifdef INET6
|| (af1 == AF_INET6 &&
IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
#endif /* INET6 */
|| (af1 == AF_UNSPEC &&
(((inp->inp_vflag & INP_IPV4) != 0 &&
inp->inp_laddr.s_addr == INADDR_ANY)
#ifdef INET6
|| ((inp->inp_vflag & INP_IPV6) != 0 &&
IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
#endif
))
))
continue;
1994-05-27 12:33:43 +00:00
if (first) {
if (!Lflag) {
xo_emit("Active Internet connections");
if (aflag)
xo_emit(" (including servers)");
} else
xo_emit(
"Current listen queue sizes (qlen/incqlen/maxqlen)");
xo_emit("\n");
1994-05-27 12:33:43 +00:00
if (Aflag)
xo_emit("{T:/%-*s} ", 2 * (int)sizeof(void *),
"Tcpcb");
if (Lflag)
xo_emit((Aflag && !Wflag) ?
"{T:/%-5.5s} {T:/%-32.32s} {T:/%-18.18s}" :
((!Wflag || af1 == AF_INET) ?
"{T:/%-5.5s} {T:/%-32.32s} {T:/%-22.22s}" :
"{T:/%-5.5s} {T:/%-32.32s} {T:/%-45.45s}"),
2008-01-04 03:08:49 +00:00
"Proto", "Listen", "Local Address");
else if (Tflag)
xo_emit((Aflag && !Wflag) ?
"{T:/%-5.5s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-18.18s} {T:/%s}" :
((!Wflag || af1 == AF_INET) ?
"{T:/%-5.5s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-22.22s} {T:/%s}" :
"{T:/%-5.5s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-45.45s} {T:/%s}"),
"Proto", "Rexmit", "OOORcv", "0-win",
"Local Address", "Foreign Address");
else {
xo_emit((Aflag && !Wflag) ?
"{T:/%-5.5s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-18.18s} {T:/%-18.18s}" :
((!Wflag || af1 == AF_INET) ?
"{T:/%-5.5s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-22.22s} {T:/%-22.22s}" :
"{T:/%-5.5s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-45.45s} {T:/%-45.45s}"),
"Proto", "Recv-Q", "Send-Q",
"Local Address", "Foreign Address");
if (!xflag && !Rflag)
Add the "TCP Blackbox Recorder" which we discussed at the developer summits at BSDCan and BSDCam in 2017. The TCP Blackbox Recorder allows you to capture events on a TCP connection in a ring buffer. It stores metadata with the event. It optionally stores the TCP header associated with an event (if the event is associated with a packet) and also optionally stores information on the sockets. It supports setting a log ID on a TCP connection and using this to correlate multiple connections that share a common log ID. You can log connections in different modes. If you are doing a coordinated test with a particular connection, you may tell the system to put it in mode 4 (continuous dump). Or, if you just want to monitor for errors, you can put it in mode 1 (ring buffer) and dump all the ring buffers associated with the connection ID when we receive an error signal for that connection ID. You can set a default mode that will be applied to a particular ratio of incoming connections. You can also manually set a mode using a socket option. This commit includes only basic probes. rrs@ has added quite an abundance of probes in his TCP development work. He plans to commit those soon. There are user-space programs which we plan to commit as ports. These read the data from the log device and output pcapng files, and then let you analyze the data (and metadata) in the pcapng files. Reviewed by: gnn (previous version) Obtained from: Netflix, Inc. Relnotes: yes Differential Revision: https://reviews.freebsd.org/D11085
2018-03-22 09:40:08 +00:00
xo_emit(" {T:/%-11.11s}", "(state)");
}
if (xflag) {
xo_emit("{T:/%-6.6s} {T:/%-6.6s} "
"{T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s} "
"{T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s}",
"R-HIWA", "S-HIWA", "R-LOWA", "S-LOWA",
"R-BCNT", "S-BCNT", "R-BMAX", "S-BMAX");
xo_emit(" {T:/%7.7s} {T:/%7.7s} {T:/%7.7s} "
"{T:/%7.7s} {T:/%7.7s} {T:/%7.7s}",
"rexmt", "persist", "keep", "2msl",
"delack", "rcvtime");
} else if (Rflag) {
xo_emit(" {T:/%8.8s} {T:/%5.5s}",
"flowid", "ftype");
}
if (cflag) {
xo_emit(" {T:/%-*.*s}",
fnamelen, fnamelen, "Stack");
}
if (Cflag)
xo_emit(" {T:/%-*.*s} {T:/%10.10s}"
" {T:/%10.10s} {T:/%5.5s}"
" {T:/%3.3s}", cnamelen,
cnamelen, "CC",
"cwin",
"ssthresh",
"MSS",
"ECN");
Add the "TCP Blackbox Recorder" which we discussed at the developer summits at BSDCan and BSDCam in 2017. The TCP Blackbox Recorder allows you to capture events on a TCP connection in a ring buffer. It stores metadata with the event. It optionally stores the TCP header associated with an event (if the event is associated with a packet) and also optionally stores information on the sockets. It supports setting a log ID on a TCP connection and using this to correlate multiple connections that share a common log ID. You can log connections in different modes. If you are doing a coordinated test with a particular connection, you may tell the system to put it in mode 4 (continuous dump). Or, if you just want to monitor for errors, you can put it in mode 1 (ring buffer) and dump all the ring buffers associated with the connection ID when we receive an error signal for that connection ID. You can set a default mode that will be applied to a particular ratio of incoming connections. You can also manually set a mode using a socket option. This commit includes only basic probes. rrs@ has added quite an abundance of probes in his TCP development work. He plans to commit those soon. There are user-space programs which we plan to commit as ports. These read the data from the log device and output pcapng files, and then let you analyze the data (and metadata) in the pcapng files. Reviewed by: gnn (previous version) Obtained from: Netflix, Inc. Relnotes: yes Differential Revision: https://reviews.freebsd.org/D11085
2018-03-22 09:40:08 +00:00
if (Pflag)
xo_emit(" {T:/%s}", "Log ID");
xo_emit("\n");
1994-05-27 12:33:43 +00:00
first = 0;
}
if (Lflag && so->so_qlimit == 0)
continue;
xo_open_instance("socket");
if (Aflag)
xo_emit("{q:address/%*lx} ", 2 * (int)sizeof(void *),
(u_long)so->so_pcb);
#ifdef INET6
if ((inp->inp_vflag & INP_IPV6) != 0)
2008-01-04 03:08:49 +00:00
vchar = ((inp->inp_vflag & INP_IPV4) != 0) ?
"46" : "6";
else
#endif
2008-01-04 03:08:49 +00:00
vchar = ((inp->inp_vflag & INP_IPV4) != 0) ?
"4" : "";
if (istcp && (tp->t_flags & TF_TOE) != 0)
xo_emit("{:protocol/%-3.3s%-2.2s/%s%s} ", "toe", vchar);
else
xo_emit("{:protocol/%-3.3s%-2.2s/%s%s} ", name, vchar);
if (Lflag) {
char buf1[33];
snprintf(buf1, sizeof buf1, "%u/%u/%u", so->so_qlen,
2008-01-04 03:08:49 +00:00
so->so_incqlen, so->so_qlimit);
xo_emit("{:listen-queue-sizes/%-32.32s} ", buf1);
} else if (Tflag) {
if (istcp)
xo_emit("{:sent-retransmit-packets/%6u} "
"{:received-out-of-order-packets/%6u} "
"{:sent-zero-window/%6u} ",
tp->t_sndrexmitpack, tp->t_rcvoopack,
tp->t_sndzerowin);
2015-11-25 11:20:54 +00:00
else
xo_emit("{P:/%21s}", "");
} else {
xo_emit("{:receive-bytes-waiting/%6u} "
"{:send-bytes-waiting/%6u} ",
Merge from projects/sendfile: o Introduce a notion of "not ready" mbufs in socket buffers. These mbufs are now being populated by some I/O in background and are referenced outside. This forces following implications: - An mbuf which is "not ready" can't be taken out of the buffer. - An mbuf that is behind a "not ready" in the queue neither. - If sockbet buffer is flushed, then "not ready" mbufs shouln't be freed. o In struct sockbuf the sb_cc field is split into sb_ccc and sb_acc. The sb_ccc stands for ""claimed character count", or "committed character count". And the sb_acc is "available character count". Consumers of socket buffer API shouldn't already access them directly, but use sbused() and sbavail() respectively. o Not ready mbufs are marked with M_NOTREADY, and ready but blocked ones with M_BLOCKED. o New field sb_fnrdy points to the first not ready mbuf, to avoid linear search. o New function sbready() is provided to activate certain amount of mbufs in a socket buffer. A special note on SCTP: SCTP has its own sockbufs. Unfortunately, FreeBSD stack doesn't yet allow protocol specific sockbufs. Thus, SCTP does some hacks to make itself compatible with FreeBSD: it manages sockbufs on its own, but keeps sb_cc updated to inform the stack of amount of data in them. The new notion of "not ready" data isn't supported by SCTP. Instead, only a mechanical substitute is done: s/sb_cc/sb_ccc/. A proper solution would be to take away struct sockbuf from struct socket and allow protocols to implement their own socket buffers, like SCTP already does. This was discussed with rrs@. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2014-11-30 12:52:33 +00:00
so->so_rcv.sb_cc, so->so_snd.sb_cc);
}
if (numeric_port) {
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
inetprint("local", &inp->inp_laddr,
(int)inp->inp_lport, name, 1, af1);
if (!Lflag)
inetprint("remote", &inp->inp_faddr,
(int)inp->inp_fport, name, 1, af1);
}
#endif
#if defined(INET) && defined(INET6)
else
#endif
#ifdef INET6
if (inp->inp_vflag & INP_IPV6) {
inet6print("local", &inp->in6p_laddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_lport, name, 1);
if (!Lflag)
inet6print("remote", &inp->in6p_faddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_fport, name, 1);
} /* else nothing printed now */
#endif /* INET6 */
} else if (inp->inp_flags & INP_ANONPORT) {
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
inetprint("local", &inp->inp_laddr,
(int)inp->inp_lport, name, 1, af1);
if (!Lflag)
inetprint("remote", &inp->inp_faddr,
(int)inp->inp_fport, name, 0, af1);
}
#endif
#if defined(INET) && defined(INET6)
else
#endif
#ifdef INET6
if (inp->inp_vflag & INP_IPV6) {
inet6print("local", &inp->in6p_laddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_lport, name, 1);
if (!Lflag)
inet6print("remote", &inp->in6p_faddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_fport, name, 0);
} /* else nothing printed now */
#endif /* INET6 */
} else {
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
inetprint("local", &inp->inp_laddr,
(int)inp->inp_lport, name, 0, af1);
if (!Lflag)
inetprint("remote", &inp->inp_faddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_fport, name,
inp->inp_lport != inp->inp_fport,
af1);
}
#endif
#if defined(INET) && defined(INET6)
else
#endif
#ifdef INET6
if (inp->inp_vflag & INP_IPV6) {
inet6print("local", &inp->in6p_laddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_lport, name, 0);
if (!Lflag)
inet6print("remote", &inp->in6p_faddr,
2008-01-04 03:08:49 +00:00
(int)inp->inp_fport, name,
inp->inp_lport != inp->inp_fport);
} /* else nothing printed now */
#endif /* INET6 */
}
if (xflag) {
xo_emit("{:receive-high-water/%6u} "
"{:send-high-water/%6u} "
"{:receive-low-water/%6u} {:send-low-water/%6u} "
"{:receive-mbuf-bytes/%6u} {:send-mbuf-bytes/%6u} "
"{:receive-mbuf-bytes-max/%6u} "
"{:send-mbuf-bytes-max/%6u}",
so->so_rcv.sb_hiwat, so->so_snd.sb_hiwat,
so->so_rcv.sb_lowat, so->so_snd.sb_lowat,
so->so_rcv.sb_mbcnt, so->so_snd.sb_mbcnt,
so->so_rcv.sb_mbmax, so->so_snd.sb_mbmax);
if (istcp)
xo_emit(" {:retransmit-timer/%4d.%02d} "
"{:persist-timer/%4d.%02d} "
"{:keepalive-timer/%4d.%02d} "
"{:msl2-timer/%4d.%02d} "
"{:delay-ack-timer/%4d.%02d} "
"{:inactivity-timer/%4d.%02d}",
tp->tt_rexmt / 1000,
(tp->tt_rexmt % 1000) / 10,
tp->tt_persist / 1000,
(tp->tt_persist % 1000) / 10,
tp->tt_keep / 1000,
(tp->tt_keep % 1000) / 10,
tp->tt_2msl / 1000,
(tp->tt_2msl % 1000) / 10,
tp->tt_delack / 1000,
(tp->tt_delack % 1000) / 10,
tp->t_rcvtime / 1000,
(tp->t_rcvtime % 1000) / 10);
}
if (istcp && !Lflag && !xflag && !Tflag && !Rflag) {
if (tp->t_state < 0 || tp->t_state >= TCP_NSTATES)
Add the "TCP Blackbox Recorder" which we discussed at the developer summits at BSDCan and BSDCam in 2017. The TCP Blackbox Recorder allows you to capture events on a TCP connection in a ring buffer. It stores metadata with the event. It optionally stores the TCP header associated with an event (if the event is associated with a packet) and also optionally stores information on the sockets. It supports setting a log ID on a TCP connection and using this to correlate multiple connections that share a common log ID. You can log connections in different modes. If you are doing a coordinated test with a particular connection, you may tell the system to put it in mode 4 (continuous dump). Or, if you just want to monitor for errors, you can put it in mode 1 (ring buffer) and dump all the ring buffers associated with the connection ID when we receive an error signal for that connection ID. You can set a default mode that will be applied to a particular ratio of incoming connections. You can also manually set a mode using a socket option. This commit includes only basic probes. rrs@ has added quite an abundance of probes in his TCP development work. He plans to commit those soon. There are user-space programs which we plan to commit as ports. These read the data from the log device and output pcapng files, and then let you analyze the data (and metadata) in the pcapng files. Reviewed by: gnn (previous version) Obtained from: Netflix, Inc. Relnotes: yes Differential Revision: https://reviews.freebsd.org/D11085
2018-03-22 09:40:08 +00:00
xo_emit("{:tcp-state/%-11d}", tp->t_state);
else {
Add the "TCP Blackbox Recorder" which we discussed at the developer summits at BSDCan and BSDCam in 2017. The TCP Blackbox Recorder allows you to capture events on a TCP connection in a ring buffer. It stores metadata with the event. It optionally stores the TCP header associated with an event (if the event is associated with a packet) and also optionally stores information on the sockets. It supports setting a log ID on a TCP connection and using this to correlate multiple connections that share a common log ID. You can log connections in different modes. If you are doing a coordinated test with a particular connection, you may tell the system to put it in mode 4 (continuous dump). Or, if you just want to monitor for errors, you can put it in mode 1 (ring buffer) and dump all the ring buffers associated with the connection ID when we receive an error signal for that connection ID. You can set a default mode that will be applied to a particular ratio of incoming connections. You can also manually set a mode using a socket option. This commit includes only basic probes. rrs@ has added quite an abundance of probes in his TCP development work. He plans to commit those soon. There are user-space programs which we plan to commit as ports. These read the data from the log device and output pcapng files, and then let you analyze the data (and metadata) in the pcapng files. Reviewed by: gnn (previous version) Obtained from: Netflix, Inc. Relnotes: yes Differential Revision: https://reviews.freebsd.org/D11085
2018-03-22 09:40:08 +00:00
xo_emit("{:tcp-state/%-11s}",
tcpstates[tp->t_state]);
#if defined(TF_NEEDSYN) && defined(TF_NEEDFIN)
2008-01-04 03:08:49 +00:00
/* Show T/TCP `hidden state' */
if (tp->t_flags & (TF_NEEDSYN|TF_NEEDFIN))
xo_emit("{:need-syn-or-fin/*}");
#endif /* defined(TF_NEEDSYN) && defined(TF_NEEDFIN) */
2008-01-04 03:08:49 +00:00
}
}
if (Rflag) {
/* XXX: is this right Alfred */
xo_emit(" {:flow-id/%08x} {:flow-type/%5d}",
inp->inp_flowid,
inp->inp_flowtype);
}
if (istcp) {
if (cflag)
xo_emit(" {:stack/%-*.*s}",
fnamelen, fnamelen, tp->xt_stack);
if (Cflag)
xo_emit(" {:cc/%-*.*s}"
" {:snd-cwnd/%10lu}"
" {:snd-ssthresh/%10lu}"
" {:t-maxseg/%5u} {:ecn/%3s}",
cnamelen, cnamelen, tp->xt_cc,
tp->t_snd_cwnd, tp->t_snd_ssthresh,
tp->t_maxseg,
(tp->t_state >= TCPS_ESTABLISHED ?
(tp->xt_ecn > 0 ?
(tp->xt_ecn == 1 ?
"ecn" : "ace")
: "off")
: "n/a"));
if (Pflag)
xo_emit(" {:log-id/%s}",
tp->xt_logid[0] == '\0' ?
"-" : tp->xt_logid);
}
xo_emit("\n");
xo_close_instance("socket");
1994-05-27 12:33:43 +00:00
}
if (xig != oxig && xig->xig_gen != oxig->xig_gen) {
if (oxig->xig_count > xig->xig_count) {
xo_emit("Some {d:lost/%s} sockets may have been "
"deleted.\n", name);
} else if (oxig->xig_count < xig->xig_count) {
xo_emit("Some {d:created/%s} sockets may have been "
"created.\n", name);
} else {
xo_emit("Some {d:changed/%s} sockets may have been "
"created or deleted.\n", name);
}
}
free(buf);
1994-05-27 12:33:43 +00:00
}
/*
* Dump TCP statistics structure.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
tcp_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
1994-05-27 12:33:43 +00:00
{
struct tcpstat tcpstat;
uint64_t tcps_states[TCP_NSTATES];
#ifdef INET6
if (tcp_done != 0)
return;
else
tcp_done = 1;
#endif
if (fetch_stats("net.inet.tcp.stats", off, &tcpstat,
sizeof(tcpstat), kread_counters) != 0)
return;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (fetch_stats_ro("net.inet.tcp.states", nl[N_TCPS_STATES].n_value,
&tcps_states, sizeof(tcps_states), kread_counters) != 0)
return;
xo_open_container("tcp");
xo_emit("{T:/%s}:\n", name);
1994-05-27 12:33:43 +00:00
#define p(f, m) if (tcpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t )tcpstat.f, plural(tcpstat.f))
#define p1a(f, m) if (tcpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t )tcpstat.f)
#define p2(f1, f2, m) if (tcpstat.f1 || tcpstat.f2 || sflag <= 1) \
xo_emit(m, (uintmax_t )tcpstat.f1, plural(tcpstat.f1), \
(uintmax_t )tcpstat.f2, plural(tcpstat.f2))
#define p2a(f1, f2, m) if (tcpstat.f1 || tcpstat.f2 || sflag <= 1) \
xo_emit(m, (uintmax_t )tcpstat.f1, plural(tcpstat.f1), \
(uintmax_t )tcpstat.f2)
#define p3(f, m) if (tcpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t )tcpstat.f, pluralies(tcpstat.f))
p(tcps_sndtotal, "\t{:sent-packets/%ju} {N:/packet%s sent}\n");
p2(tcps_sndpack,tcps_sndbyte, "\t\t{:sent-data-packets/%ju} "
"{N:/data packet%s} ({:sent-data-bytes/%ju} {N:/byte%s})\n");
p2(tcps_sndrexmitpack, tcps_sndrexmitbyte, "\t\t"
"{:sent-retransmitted-packets/%ju} {N:/data packet%s} "
"({:sent-retransmitted-bytes/%ju} {N:/byte%s}) "
"{N:retransmitted}\n");
p(tcps_sndrexmitbad, "\t\t"
"{:sent-unnecessary-retransmitted-packets/%ju} "
"{N:/data packet%s unnecessarily retransmitted}\n");
p(tcps_mturesent, "\t\t{:sent-resends-by-mtu-discovery/%ju} "
"{N:/resend%s initiated by MTU discovery}\n");
p2a(tcps_sndacks, tcps_delack, "\t\t{:sent-ack-only-packets/%ju} "
"{N:/ack-only packet%s/} ({:sent-packets-delayed/%ju} "
"{N:delayed})\n");
p(tcps_sndurg, "\t\t{:sent-urg-only-packets/%ju} "
"{N:/URG only packet%s}\n");
p(tcps_sndprobe, "\t\t{:sent-window-probe-packets/%ju} "
"{N:/window probe packet%s}\n");
p(tcps_sndwinup, "\t\t{:sent-window-update-packets/%ju} "
"{N:/window update packet%s}\n");
p(tcps_sndctrl, "\t\t{:sent-control-packets/%ju} "
"{N:/control packet%s}\n");
p(tcps_rcvtotal, "\t{:received-packets/%ju} "
"{N:/packet%s received}\n");
p2(tcps_rcvackpack, tcps_rcvackbyte, "\t\t"
"{:received-ack-packets/%ju} {N:/ack%s} "
"{N:(for} {:received-ack-bytes/%ju} {N:/byte%s})\n");
p(tcps_rcvdupack, "\t\t{:received-duplicate-acks/%ju} "
"{N:/duplicate ack%s}\n");
p(tcps_tunneled_pkts, "\t\t{:received-udp-tunneled-pkts/%ju} "
"{N:/UDP tunneled pkt%s}\n");
p(tcps_tunneled_errs, "\t\t{:received-bad-udp-tunneled-pkts/%ju} "
"{N:/UDP tunneled pkt cnt with error%s}\n");
p(tcps_rcvacktoomuch, "\t\t{:received-acks-for-unsent-data/%ju} "
"{N:/ack%s for unsent data}\n");
p2(tcps_rcvpack, tcps_rcvbyte, "\t\t"
"{:received-in-sequence-packets/%ju} {N:/packet%s} "
"({:received-in-sequence-bytes/%ju} {N:/byte%s}) "
"{N:received in-sequence}\n");
p2(tcps_rcvduppack, tcps_rcvdupbyte, "\t\t"
"{:received-completely-duplicate-packets/%ju} "
"{N:/completely duplicate packet%s} "
"({:received-completely-duplicate-bytes/%ju} {N:/byte%s})\n");
p(tcps_pawsdrop, "\t\t{:received-old-duplicate-packets/%ju} "
"{N:/old duplicate packet%s}\n");
p2(tcps_rcvpartduppack, tcps_rcvpartdupbyte, "\t\t"
"{:received-some-duplicate-packets/%ju} "
"{N:/packet%s with some dup. data} "
"({:received-some-duplicate-bytes/%ju} {N:/byte%s duped/})\n");
p2(tcps_rcvoopack, tcps_rcvoobyte, "\t\t{:received-out-of-order/%ju} "
"{N:/out-of-order packet%s} "
"({:received-out-of-order-bytes/%ju} {N:/byte%s})\n");
p2(tcps_rcvpackafterwin, tcps_rcvbyteafterwin, "\t\t"
"{:received-after-window-packets/%ju} {N:/packet%s} "
"({:received-after-window-bytes/%ju} {N:/byte%s}) "
"{N:of data after window}\n");
p(tcps_rcvwinprobe, "\t\t{:received-window-probes/%ju} "
"{N:/window probe%s}\n");
p(tcps_rcvwinupd, "\t\t{:receive-window-update-packets/%ju} "
"{N:/window update packet%s}\n");
p(tcps_dsack_count, "\t\t{:received-with-dsack-packets/%ju} "
"{N:/packet%s received with dsack}\n");
p(tcps_dsack_bytes, "\t\t{:received-with-dsack-bytes/%ju} "
"{N:/dsack byte%s received (no TLP involved)}\n");
p(tcps_dsack_tlp_bytes, "\t\t{:received-with-dsack-bytes-tlp/%ju} "
"{N:/dsack byte%s received (TLP responsible)}\n");
p(tcps_rcvafterclose, "\t\t{:received-after-close-packets/%ju} "
"{N:/packet%s received after close}\n");
p(tcps_rcvbadsum, "\t\t{:discard-bad-checksum/%ju} "
"{N:/discarded for bad checksum%s}\n");
p(tcps_rcvbadoff, "\t\t{:discard-bad-header-offset/%ju} "
"{N:/discarded for bad header offset field%s}\n");
p1a(tcps_rcvshort, "\t\t{:discard-too-short/%ju} "
"{N:discarded because packet too short}\n");
p1a(tcps_rcvreassfull, "\t\t{:discard-reassembly-queue-full/%ju} "
"{N:discarded due to full reassembly queue}\n");
p(tcps_connattempt, "\t{:connection-requests/%ju} "
"{N:/connection request%s}\n");
p(tcps_accepts, "\t{:connections-accepts/%ju} "
"{N:/connection accept%s}\n");
p(tcps_badsyn, "\t{:bad-connection-attempts/%ju} "
"{N:/bad connection attempt%s}\n");
p(tcps_listendrop, "\t{:listen-queue-overflows/%ju} "
"{N:/listen queue overflow%s}\n");
p(tcps_badrst, "\t{:ignored-in-window-resets/%ju} "
"{N:/ignored RSTs in the window%s}\n");
p(tcps_connects, "\t{:connections-established/%ju} "
"{N:/connection%s established (including accepts)}\n");
p(tcps_usedrtt, "\t\t{:connections-hostcache-rtt/%ju} "
"{N:/time%s used RTT from hostcache}\n");
p(tcps_usedrttvar, "\t\t{:connections-hostcache-rttvar/%ju} "
"{N:/time%s used RTT variance from hostcache}\n");
p(tcps_usedssthresh, "\t\t{:connections-hostcache-ssthresh/%ju} "
"{N:/time%s used slow-start threshold from hostcache}\n");
p2(tcps_closed, tcps_drops, "\t{:connections-closed/%ju} "
"{N:/connection%s closed (including} "
"{:connection-drops/%ju} {N:/drop%s})\n");
p(tcps_cachedrtt, "\t\t{:connections-updated-rtt-on-close/%ju} "
"{N:/connection%s updated cached RTT on close}\n");
p(tcps_cachedrttvar, "\t\t"
"{:connections-updated-variance-on-close/%ju} "
"{N:/connection%s updated cached RTT variance on close}\n");
p(tcps_cachedssthresh, "\t\t"
"{:connections-updated-ssthresh-on-close/%ju} "
"{N:/connection%s updated cached ssthresh on close}\n");
p(tcps_conndrops, "\t{:embryonic-connections-dropped/%ju} "
"{N:/embryonic connection%s dropped}\n");
p2(tcps_rttupdated, tcps_segstimed, "\t{:segments-updated-rtt/%ju} "
"{N:/segment%s updated rtt (of} "
"{:segment-update-attempts/%ju} {N:/attempt%s})\n");
p(tcps_rexmttimeo, "\t{:retransmit-timeouts/%ju} "
"{N:/retransmit timeout%s}\n");
p(tcps_timeoutdrop, "\t\t"
"{:connections-dropped-by-retransmit-timeout/%ju} "
"{N:/connection%s dropped by rexmit timeout}\n");
p(tcps_persisttimeo, "\t{:persist-timeout/%ju} "
"{N:/persist timeout%s}\n");
p(tcps_persistdrop, "\t\t"
"{:connections-dropped-by-persist-timeout/%ju} "
"{N:/connection%s dropped by persist timeout}\n");
p(tcps_finwait2_drops, "\t"
"{:connections-dropped-by-finwait2-timeout/%ju} "
"{N:/Connection%s (fin_wait_2) dropped because of timeout}\n");
p(tcps_keeptimeo, "\t{:keepalive-timeout/%ju} "
"{N:/keepalive timeout%s}\n");
p(tcps_keepprobe, "\t\t{:keepalive-probes/%ju} "
"{N:/keepalive probe%s sent}\n");
p(tcps_keepdrops, "\t\t{:connections-dropped-by-keepalives/%ju} "
"{N:/connection%s dropped by keepalive}\n");
p(tcps_progdrops, "\t{:connections-dropped-due-to-progress-time/%ju} "
"{N:/connection%s dropped due to exceeding progress time}\n");
p(tcps_predack, "\t{:ack-header-predictions/%ju} "
"{N:/correct ACK header prediction%s}\n");
p(tcps_preddat, "\t{:data-packet-header-predictions/%ju} "
"{N:/correct data packet header prediction%s}\n");
xo_open_container("syncache");
p3(tcps_sc_added, "\t{:entries-added/%ju} "
"{N:/syncache entr%s added}\n");
p1a(tcps_sc_retransmitted, "\t\t{:retransmitted/%ju} "
"{N:/retransmitted}\n");
p1a(tcps_sc_dupsyn, "\t\t{:duplicates/%ju} {N:/dupsyn}\n");
p1a(tcps_sc_dropped, "\t\t{:dropped/%ju} {N:/dropped}\n");
p1a(tcps_sc_completed, "\t\t{:completed/%ju} {N:/completed}\n");
p1a(tcps_sc_bucketoverflow, "\t\t{:bucket-overflow/%ju} "
"{N:/bucket overflow}\n");
p1a(tcps_sc_cacheoverflow, "\t\t{:cache-overflow/%ju} "
"{N:/cache overflow}\n");
p1a(tcps_sc_reset, "\t\t{:reset/%ju} {N:/reset}\n");
p1a(tcps_sc_stale, "\t\t{:stale/%ju} {N:/stale}\n");
p1a(tcps_sc_aborted, "\t\t{:aborted/%ju} {N:/aborted}\n");
p1a(tcps_sc_badack, "\t\t{:bad-ack/%ju} {N:/badack}\n");
p1a(tcps_sc_unreach, "\t\t{:unreachable/%ju} {N:/unreach}\n");
p(tcps_sc_zonefail, "\t\t{:zone-failures/%ju} {N:/zone failure%s}\n");
p(tcps_sc_sendcookie, "\t{:sent-cookies/%ju} {N:/cookie%s sent}\n");
p(tcps_sc_recvcookie, "\t{:receivd-cookies/%ju} "
"{N:/cookie%s received}\n");
xo_close_container("syncache");
xo_open_container("hostcache");
p3(tcps_hc_added, "\t{:entries-added/%ju} "
"{N:/hostcache entr%s added}\n");
p1a(tcps_hc_bucketoverflow, "\t\t{:buffer-overflows/%ju} "
"{N:/bucket overflow}\n");
xo_close_container("hostcache");
xo_open_container("sack");
p(tcps_sack_recovery_episode, "\t{:recovery-episodes/%ju} "
"{N:/SACK recovery episode%s}\n");
p(tcps_sack_rexmits, "\t{:segment-retransmits/%ju} "
"{N:/segment rexmit%s in SACK recovery episodes}\n");
p(tcps_sack_rexmit_bytes, "\t{:byte-retransmits/%ju} "
"{N:/byte rexmit%s in SACK recovery episodes}\n");
p(tcps_sack_rcv_blocks, "\t{:received-blocks/%ju} "
"{N:/SACK option%s (SACK blocks) received}\n");
p(tcps_sack_send_blocks, "\t{:sent-option-blocks/%ju} "
"{N:/SACK option%s (SACK blocks) sent}\n");
2021-05-10 18:49:19 +00:00
p(tcps_sack_lostrexmt, "\t{:lost-retransmissions/%ju} "
"{N:/SACK retransmission%s lost}\n");
p1a(tcps_sack_sboverflow, "\t{:scoreboard-overflows/%ju} "
"{N:/SACK scoreboard overflow}\n");
xo_close_container("sack");
xo_open_container("ecn");
p(tcps_ecn_rcvce, "\t{:received-ce-packets/%ju} "
"{N:/packet%s received with ECN CE bit set}\n");
p(tcps_ecn_rcvect0, "\t{:received-ect0-packets/%ju} "
"{N:/packet%s received with ECN ECT(0) bit set}\n");
p(tcps_ecn_rcvect1, "\t{:received-ect1-packets/%ju} "
"{N:/packet%s received with ECN ECT(1) bit set}\n");
p(tcps_ecn_sndect0, "\t{:sent-ect0-packets/%ju} "
"{N:/packet%s sent with ECN ECT(0) bit set}\n");
p(tcps_ecn_sndect1, "\t{:sent-ect1-packets/%ju} "
"{N:/packet%s sent with ECN ECT(1) bit set}\n");
p(tcps_ecn_shs, "\t{:handshakes/%ju} "
"{N:/successful ECN handshake%s}\n");
p(tcps_ecn_rcwnd, "\t{:congestion-reductions/%ju} "
"{N:/time%s ECN reduced the congestion window}\n");
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
p(tcps_ace_nect, "\t{:ace-nonect-syn/%ju} "
"{N:/ACE SYN packet%s with Non-ECT}\n");
p(tcps_ace_ect0, "\t{:ace-ect0-syn/%ju} "
"{N:/ACE SYN packet%s with ECT0}\n");
p(tcps_ace_ect1, "\t{:ace-ect1-syn/%ju} "
"{N:/ACE SYN packet%s with ECT1}\n");
p(tcps_ace_ce, "\t{:ace-ce-syn/%ju} "
"{N:/ACE SYN packet%s with CE}\n");
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
xo_close_container("ecn");
xo_open_container("tcp-signature");
p(tcps_sig_rcvgoodsig, "\t{:received-good-signature/%ju} "
"{N:/packet%s with matching signature received}\n");
p(tcps_sig_rcvbadsig, "\t{:received-bad-signature/%ju} "
"{N:/packet%s with bad signature received}\n");
p(tcps_sig_err_buildsig, "\t{:failed-make-signature/%ju} "
"{N:/time%s failed to make signature due to no SA}\n");
p(tcps_sig_err_sigopt, "\t{:no-signature-expected/%ju} "
"{N:/time%s unexpected signature received}\n");
p(tcps_sig_err_nosigopt, "\t{:no-signature-provided/%ju} "
"{N:/time%s no signature provided by segment}\n");
xo_close_container("tcp-signature");
xo_open_container("pmtud");
p(tcps_pmtud_blackhole_activated, "\t{:pmtud-activated/%ju} "
"{N:/Path MTU discovery black hole detection activation%s}\n");
p(tcps_pmtud_blackhole_activated_min_mss,
"\t{:pmtud-activated-min-mss/%ju} "
"{N:/Path MTU discovery black hole detection min MSS activation%s}\n");
p(tcps_pmtud_blackhole_failed, "\t{:pmtud-failed/%ju} "
"{N:/Path MTU discovery black hole detection failure%s}\n");
xo_close_container("pmtud");
xo_open_container("tw");
p(tcps_tw_responds, "\t{:tw_responds/%ju} "
"{N:/time%s connection in TIME-WAIT responded with ACK}\n");
p(tcps_tw_recycles, "\t{:tw_recycles/%ju} "
"{N:/time%s connection in TIME-WAIT was actively recycled}\n");
p(tcps_tw_resets, "\t{:tw_resets/%ju} "
"{N:/time%s connection in TIME-WAIT responded with RST}\n");
xo_close_container("tw");
#undef p
#undef p1a
#undef p2
#undef p2a
#undef p3
xo_open_container("TCP connection count by state");
xo_emit("{T:/TCP connection count by state}:\n");
for (int i = 0; i < TCP_NSTATES; i++) {
/*
* XXXGL: is there a way in libxo to use %s
* in the "content string" of a format
* string? I failed to do that, that's why
* a temporary buffer is used to construct
* format string for xo_emit().
*/
char fmtbuf[80];
if (sflag > 1 && tcps_states[i] == 0)
continue;
snprintf(fmtbuf, sizeof(fmtbuf), "\t{:%s/%%ju} "
"{Np:/connection ,connections} in %s state\n",
tcpstates[i], tcpstates[i]);
xo_emit(fmtbuf, (uintmax_t )tcps_states[i]);
}
xo_close_container("TCP connection count by state");
xo_close_container("tcp");
1994-05-27 12:33:43 +00:00
}
/*
* Dump UDP statistics structure.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
udp_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
1994-05-27 12:33:43 +00:00
{
struct udpstat udpstat;
uint64_t delivered;
1994-05-27 12:33:43 +00:00
#ifdef INET6
if (udp_done != 0)
return;
else
udp_done = 1;
#endif
if (fetch_stats("net.inet.udp.stats", off, &udpstat,
sizeof(udpstat), kread_counters) != 0)
return;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
xo_open_container("udp");
xo_emit("{T:/%s}:\n", name);
1994-05-27 12:33:43 +00:00
#define p(f, m) if (udpstat.f || sflag <= 1) \
xo_emit("\t" m, (uintmax_t)udpstat.f, plural(udpstat.f))
1998-07-06 21:01:54 +00:00
#define p1a(f, m) if (udpstat.f || sflag <= 1) \
xo_emit("\t" m, (uintmax_t)udpstat.f)
p(udps_ipackets, "{:received-datagrams/%ju} "
"{N:/datagram%s received}\n");
p1a(udps_hdrops, "{:dropped-incomplete-headers/%ju} "
"{N:/with incomplete header}\n");
p1a(udps_badlen, "{:dropped-bad-data-length/%ju} "
"{N:/with bad data length field}\n");
p1a(udps_badsum, "{:dropped-bad-checksum/%ju} "
"{N:/with bad checksum}\n");
p1a(udps_nosum, "{:dropped-no-checksum/%ju} "
"{N:/with no checksum}\n");
p1a(udps_noport, "{:dropped-no-socket/%ju} "
"{N:/dropped due to no socket}\n");
p(udps_noportbcast, "{:dropped-broadcast-multicast/%ju} "
"{N:/broadcast\\/multicast datagram%s undelivered}\n");
p1a(udps_fullsock, "{:dropped-full-socket-buffer/%ju} "
"{N:/dropped due to full socket buffers}\n");
p1a(udpps_pcbhashmiss, "{:not-for-hashed-pcb/%ju} "
"{N:/not for hashed pcb}\n");
1994-05-27 12:33:43 +00:00
delivered = udpstat.udps_ipackets -
udpstat.udps_hdrops -
udpstat.udps_badlen -
udpstat.udps_badsum -
udpstat.udps_noport -
udpstat.udps_noportbcast -
udpstat.udps_fullsock;
if (delivered || sflag <= 1)
xo_emit("\t{:delivered-packets/%ju} {N:/delivered}\n",
(uint64_t)delivered);
p(udps_opackets, "{:output-packets/%ju} {N:/datagram%s output}\n");
Import rewrite of IPv4 socket multicast layer to support source-specific and protocol-independent host mode multicast. The code is written to accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work. This change only pertains to FreeBSD's use as a multicast end-station and does not concern multicast routing; for an IGMPv3/MLDv2 router implementation, consider the XORP project. The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6, which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html Summary * IPv4 multicast socket processing is now moved out of ip_output.c into a new module, in_mcast.c. * The in_mcast.c module implements the IPv4 legacy any-source API in terms of the protocol-independent source-specific API. * Source filters are lazy allocated as the common case does not use them. They are part of per inpcb state and are covered by the inpcb lock. * struct ip_mreqn is now supported to allow applications to specify multicast joins by interface index in the legacy IPv4 any-source API. * In UDP, an incoming multicast datagram only requires that the source port matches the 4-tuple if the socket was already bound by source port. An unbound socket SHOULD be able to receive multicasts sent from an ephemeral source port. * The UDP socket multicast filter mode defaults to exclusive, that is, sources present in the per-socket list will be blocked from delivery. * The RFC 3678 userland functions have been added to libc: setsourcefilter, getsourcefilter, setipv4sourcefilter, getipv4sourcefilter. * Definitions for IGMPv3 are merged but not yet used. * struct sockaddr_storage is now referenced from <netinet/in.h>. It is therefore defined there if not already declared in the same way as for the C99 types. * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF which are then interpreted as interface indexes) is now deprecated. * A patch for the Rhyolite.com routed in the FreeBSD base system is available in the -net archives. This only affects individuals running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces. * Make IPv6 detach path similar to IPv4's in code flow; functionally same. * Bump __FreeBSD_version to 700048; see UPDATING. This work was financially supported by another FreeBSD committer. Obtained from: p4://bms_netdev Submitted by: Wilbert de Graaf (original work) Reviewed by: rwatson (locking), silence from fenner, net@ (but with encouragement)
2007-06-12 16:24:56 +00:00
/* the next statistic is cumulative in udps_noportbcast */
p(udps_filtermcast, "{:multicast-source-filter-matches/%ju} "
"{N:/time%s multicast source filter matched}\n");
1994-05-27 12:33:43 +00:00
#undef p
1998-07-06 21:01:54 +00:00
#undef p1a
xo_close_container("udp");
1994-05-27 12:33:43 +00:00
}
/*
* Dump CARP statistics structure.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
carp_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
{
struct carpstats carpstat;
if (fetch_stats("net.inet.carp.stats", off, &carpstat,
sizeof(carpstat), kread_counters) != 0)
return;
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
#define p(f, m) if (carpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t)carpstat.f, plural(carpstat.f))
#define p2(f, m) if (carpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t)carpstat.f)
p(carps_ipackets, "\t{:received-inet-packets/%ju} "
"{N:/packet%s received (IPv4)}\n");
p(carps_ipackets6, "\t{:received-inet6-packets/%ju} "
"{N:/packet%s received (IPv6)}\n");
p(carps_badttl, "\t\t{:dropped-wrong-ttl/%ju} "
"{N:/packet%s discarded for wrong TTL}\n");
p(carps_hdrops, "\t\t{:dropped-short-header/%ju} "
"{N:/packet%s shorter than header}\n");
p(carps_badsum, "\t\t{:dropped-bad-checksum/%ju} "
"{N:/discarded for bad checksum%s}\n");
p(carps_badver, "\t\t{:dropped-bad-version/%ju} "
"{N:/discarded packet%s with a bad version}\n");
p2(carps_badlen, "\t\t{:dropped-short-packet/%ju} "
"{N:/discarded because packet too short}\n");
p2(carps_badauth, "\t\t{:dropped-bad-authentication/%ju} "
"{N:/discarded for bad authentication}\n");
p2(carps_badvhid, "\t\t{:dropped-bad-vhid/%ju} "
"{N:/discarded for bad vhid}\n");
p2(carps_badaddrs, "\t\t{:dropped-bad-address-list/%ju} "
"{N:/discarded because of a bad address list}\n");
p(carps_opackets, "\t{:sent-inet-packets/%ju} "
"{N:/packet%s sent (IPv4)}\n");
p(carps_opackets6, "\t{:sent-inet6-packets/%ju} "
"{N:/packet%s sent (IPv6)}\n");
p2(carps_onomem, "\t\t{:send-failed-memory-error/%ju} "
"{N:/send failed due to mbuf memory error}\n");
#if notyet
p(carps_ostates, "\t\t{:send-state-updates/%s} "
"{N:/state update%s sent}\n");
#endif
#undef p
#undef p2
xo_close_container(name);
}
1994-05-27 12:33:43 +00:00
/*
* Dump IP statistics structure.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
ip_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
1994-05-27 12:33:43 +00:00
{
struct ipstat ipstat;
1994-05-27 12:33:43 +00:00
if (fetch_stats("net.inet.ip.stats", off, &ipstat,
sizeof(ipstat), kread_counters) != 0)
return;
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
1994-05-27 12:33:43 +00:00
#define p(f, m) if (ipstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t )ipstat.f, plural(ipstat.f))
1998-07-06 21:01:54 +00:00
#define p1a(f, m) if (ipstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t )ipstat.f)
p(ips_total, "\t{:received-packets/%ju} "
"{N:/total packet%s received}\n");
p(ips_badsum, "\t{:dropped-bad-checksum/%ju} "
"{N:/bad header checksum%s}\n");
p1a(ips_toosmall, "\t{:dropped-below-minimum-size/%ju} "
"{N:/with size smaller than minimum}\n");
p1a(ips_tooshort, "\t{:dropped-short-packets/%ju} "
"{N:/with data size < data length}\n");
p1a(ips_toolong, "\t{:dropped-too-long/%ju} "
"{N:/with ip length > max ip packet size}\n");
p1a(ips_badhlen, "\t{:dropped-short-header-length/%ju} "
"{N:/with header length < data size}\n");
p1a(ips_badlen, "\t{:dropped-short-data/%ju} "
"{N:/with data length < header length}\n");
p1a(ips_badoptions, "\t{:dropped-bad-options/%ju} "
"{N:/with bad options}\n");
p1a(ips_badvers, "\t{:dropped-bad-version/%ju} "
"{N:/with incorrect version number}\n");
p(ips_fragments, "\t{:received-fragments/%ju} "
"{N:/fragment%s received}\n");
p(ips_fragdropped, "\t{:dropped-fragments/%ju} "
"{N:/fragment%s dropped (dup or out of space)}\n");
p(ips_fragtimeout, "\t{:dropped-fragments-after-timeout/%ju} "
"{N:/fragment%s dropped after timeout}\n");
p(ips_reassembled, "\t{:reassembled-packets/%ju} "
"{N:/packet%s reassembled ok}\n");
p(ips_delivered, "\t{:received-local-packets/%ju} "
"{N:/packet%s for this host}\n");
p(ips_noproto, "\t{:dropped-unknown-protocol/%ju} "
"{N:/packet%s for unknown\\/unsupported protocol}\n");
p(ips_forward, "\t{:forwarded-packets/%ju} "
"{N:/packet%s forwarded}");
p(ips_fastforward, " ({:fast-forwarded-packets/%ju} "
"{N:/packet%s fast forwarded})");
if (ipstat.ips_forward || sflag <= 1)
xo_emit("\n");
p(ips_cantforward, "\t{:packets-cannot-forward/%ju} "
"{N:/packet%s not forwardable}\n");
p(ips_notmember, "\t{:received-unknown-multicast-group/%ju} "
"{N:/packet%s received for unknown multicast group}\n");
p(ips_redirectsent, "\t{:redirects-sent/%ju} "
"{N:/redirect%s sent}\n");
p(ips_localout, "\t{:sent-packets/%ju} "
"{N:/packet%s sent from this host}\n");
p(ips_rawout, "\t{:send-packets-fabricated-header/%ju} "
"{N:/packet%s sent with fabricated ip header}\n");
p(ips_odropped, "\t{:discard-no-mbufs/%ju} "
"{N:/output packet%s dropped due to no bufs, etc.}\n");
p(ips_noroute, "\t{:discard-no-route/%ju} "
"{N:/output packet%s discarded due to no route}\n");
p(ips_fragmented, "\t{:sent-fragments/%ju} "
"{N:/output datagram%s fragmented}\n");
p(ips_ofragments, "\t{:fragments-created/%ju} "
"{N:/fragment%s created}\n");
p(ips_cantfrag, "\t{:discard-cannot-fragment/%ju} "
"{N:/datagram%s that can't be fragmented}\n");
p(ips_nogif, "\t{:discard-tunnel-no-gif/%ju} "
"{N:/tunneling packet%s that can't find gif}\n");
p(ips_badaddr, "\t{:discard-bad-address/%ju} "
"{N:/datagram%s with bad address in header}\n");
1994-05-27 12:33:43 +00:00
#undef p
1998-07-06 21:01:54 +00:00
#undef p1a
xo_close_container(name);
1994-05-27 12:33:43 +00:00
}
/*
* Dump ARP statistics structure.
*/
void
arp_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
{
struct arpstat arpstat;
if (fetch_stats("net.link.ether.arp.stats", off, &arpstat,
sizeof(arpstat), kread_counters) != 0)
return;
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
#define p(f, m) if (arpstat.f || sflag <= 1) \
xo_emit("\t" m, (uintmax_t)arpstat.f, plural(arpstat.f))
#define p2(f, m) if (arpstat.f || sflag <= 1) \
xo_emit("\t" m, (uintmax_t)arpstat.f, pluralies(arpstat.f))
p(txrequests, "{:sent-requests/%ju} {N:/ARP request%s sent}\n");
p(txerrors, "{:sent-failures/%ju} {N:/ARP request%s failed to sent}\n");
p2(txreplies, "{:sent-replies/%ju} {N:/ARP repl%s sent}\n");
p(rxrequests, "{:received-requests/%ju} "
"{N:/ARP request%s received}\n");
p2(rxreplies, "{:received-replies/%ju} "
"{N:/ARP repl%s received}\n");
p(received, "{:received-packets/%ju} "
"{N:/ARP packet%s received}\n");
p(dropped, "{:dropped-no-entry/%ju} "
"{N:/total packet%s dropped due to no ARP entry}\n");
p(timeouts, "{:entries-timeout/%ju} "
"{N:/ARP entry%s timed out}\n");
p(dupips, "{:dropped-duplicate-address/%ju} "
"{N:/Duplicate IP%s seen}\n");
#undef p
#undef p2
xo_close_container(name);
}
static const char *icmpnames[ICMP_MAXTYPE + 1] = {
"echo reply", /* RFC 792 */
1994-05-27 12:33:43 +00:00
"#1",
"#2",
"destination unreachable", /* RFC 792 */
"source quench", /* RFC 792 */
"routing redirect", /* RFC 792 */
1994-05-27 12:33:43 +00:00
"#6",
"#7",
"echo", /* RFC 792 */
"router advertisement", /* RFC 1256 */
"router solicitation", /* RFC 1256 */
"time exceeded", /* RFC 792 */
"parameter problem", /* RFC 792 */
"time stamp", /* RFC 792 */
"time stamp reply", /* RFC 792 */
"information request", /* RFC 792 */
"information request reply", /* RFC 792 */
"address mask request", /* RFC 950 */
"address mask reply", /* RFC 950 */
"#19",
"#20",
"#21",
"#22",
"#23",
"#24",
"#25",
"#26",
"#27",
"#28",
"#29",
"icmp traceroute", /* RFC 1393 */
"datagram conversion error", /* RFC 1475 */
"mobile host redirect",
"IPv6 where-are-you",
"IPv6 i-am-here",
"mobile registration req",
"mobile registration reply",
"domain name request", /* RFC 1788 */
"domain name reply", /* RFC 1788 */
"icmp SKIP",
"icmp photuris", /* RFC 2521 */
1994-05-27 12:33:43 +00:00
};
/*
* Dump ICMP statistics.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
icmp_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
1994-05-27 12:33:43 +00:00
{
struct icmpstat icmpstat;
size_t len;
int i, first;
if (fetch_stats("net.inet.icmp.stats", off, &icmpstat,
sizeof(icmpstat), kread_counters) != 0)
return;
1994-05-27 12:33:43 +00:00
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
1994-05-27 12:33:43 +00:00
#define p(f, m) if (icmpstat.f || sflag <= 1) \
xo_emit(m, icmpstat.f, plural(icmpstat.f))
1998-07-06 21:01:54 +00:00
#define p1a(f, m) if (icmpstat.f || sflag <= 1) \
xo_emit(m, icmpstat.f)
#define p2(f, m) if (icmpstat.f || sflag <= 1) \
xo_emit(m, icmpstat.f, plurales(icmpstat.f))
p(icps_error, "\t{:icmp-calls/%lu} "
"{N:/call%s to icmp_error}\n");
p(icps_oldicmp, "\t{:errors-not-from-message/%lu} "
"{N:/error%s not generated in response to an icmp message}\n");
1994-05-27 12:33:43 +00:00
for (first = 1, i = 0; i < ICMP_MAXTYPE + 1; i++) {
1994-05-27 12:33:43 +00:00
if (icmpstat.icps_outhist[i] != 0) {
if (first) {
xo_open_list("output-histogram");
xo_emit("\tOutput histogram:\n");
1994-05-27 12:33:43 +00:00
first = 0;
}
xo_open_instance("output-histogram");
if (icmpnames[i] != NULL)
xo_emit("\t\t{k:name/%s}: {:count/%lu}\n",
icmpnames[i], icmpstat.icps_outhist[i]);
else
xo_emit("\t\tunknown ICMP #{k:name/%d}: "
"{:count/%lu}\n",
i, icmpstat.icps_outhist[i]);
xo_close_instance("output-histogram");
1994-05-27 12:33:43 +00:00
}
}
if (!first)
xo_close_list("output-histogram");
p(icps_badcode, "\t{:dropped-bad-code/%lu} "
"{N:/message%s with bad code fields}\n");
p(icps_tooshort, "\t{:dropped-too-short/%lu} "
"{N:/message%s less than the minimum length}\n");
p(icps_checksum, "\t{:dropped-bad-checksum/%lu} "
"{N:/message%s with bad checksum}\n");
p(icps_badlen, "\t{:dropped-bad-length/%lu} "
"{N:/message%s with bad length}\n");
p1a(icps_bmcastecho, "\t{:dropped-multicast-echo/%lu} "
"{N:/multicast echo requests ignored}\n");
p1a(icps_bmcasttstamp, "\t{:dropped-multicast-timestamp/%lu} "
"{N:/multicast timestamp requests ignored}\n");
for (first = 1, i = 0; i < ICMP_MAXTYPE + 1; i++) {
1994-05-27 12:33:43 +00:00
if (icmpstat.icps_inhist[i] != 0) {
if (first) {
xo_open_list("input-histogram");
xo_emit("\tInput histogram:\n");
1994-05-27 12:33:43 +00:00
first = 0;
}
xo_open_instance("input-histogram");
if (icmpnames[i] != NULL)
xo_emit("\t\t{k:name/%s}: {:count/%lu}\n",
icmpnames[i],
icmpstat.icps_inhist[i]);
else
xo_emit(
"\t\tunknown ICMP #{k:name/%d}: {:count/%lu}\n",
i, icmpstat.icps_inhist[i]);
xo_close_instance("input-histogram");
1994-05-27 12:33:43 +00:00
}
}
if (!first)
xo_close_list("input-histogram");
p(icps_reflect, "\t{:sent-packets/%lu} "
"{N:/message response%s generated}\n");
p2(icps_badaddr, "\t{:discard-invalid-return-address/%lu} "
"{N:/invalid return address%s}\n");
p(icps_noroute, "\t{:discard-no-route/%lu} "
"{N:/no return route%s}\n");
1994-05-27 12:33:43 +00:00
#undef p
1998-07-06 21:01:54 +00:00
#undef p1a
#undef p2
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (live) {
len = sizeof i;
if (sysctlbyname("net.inet.icmp.maskrepl", &i, &len, NULL, 0) <
0)
return;
xo_emit("\tICMP address mask responses are "
"{q:icmp-address-responses/%sabled}\n", i ? "en" : "dis");
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
}
xo_close_container(name);
1994-05-27 12:33:43 +00:00
}
/*
* Dump IGMP statistics structure.
*/
void
igmp_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
{
struct igmpstat igmpstat;
int error, zflag0;
if (fetch_stats("net.inet.igmp.stats", 0, &igmpstat,
sizeof(igmpstat), kread) != 0)
return;
/*
* Reread net.inet.igmp.stats when zflag == 1.
* This is because this MIB contains version number and
* length of the structure which are not set when clearing
* the counters.
*/
zflag0 = zflag;
if (zflag) {
zflag = 0;
error = fetch_stats("net.inet.igmp.stats", 0, &igmpstat,
sizeof(igmpstat), kread);
zflag = zflag0;
if (error)
return;
}
if (igmpstat.igps_version != IGPS_VERSION_3) {
xo_warnx("%s: version mismatch (%d != %d)", __func__,
igmpstat.igps_version, IGPS_VERSION_3);
return;
}
if (igmpstat.igps_len != IGPS_VERSION3_LEN) {
xo_warnx("%s: size mismatch (%d != %d)", __func__,
igmpstat.igps_len, IGPS_VERSION3_LEN);
return;
}
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
#define p64(f, m) if (igmpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t) igmpstat.f, plural(igmpstat.f))
#define py64(f, m) if (igmpstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t) igmpstat.f, pluralies(igmpstat.f))
p64(igps_rcv_total, "\t{:received-messages/%ju} "
"{N:/message%s received}\n");
p64(igps_rcv_tooshort, "\t{:dropped-too-short/%ju} "
"{N:/message%s received with too few bytes}\n");
p64(igps_rcv_badttl, "\t{:dropped-wrong-ttl/%ju} "
"{N:/message%s received with wrong TTL}\n");
p64(igps_rcv_badsum, "\t{:dropped-bad-checksum/%ju} "
"{N:/message%s received with bad checksum}\n");
py64(igps_rcv_v1v2_queries, "\t{:received-membership-queries/%ju} "
"{N:/V1\\/V2 membership quer%s received}\n");
py64(igps_rcv_v3_queries, "\t{:received-v3-membership-queries/%ju} "
"{N:/V3 membership quer%s received}\n");
py64(igps_rcv_badqueries, "\t{:dropped-membership-queries/%ju} "
"{N:/membership quer%s received with invalid field(s)}\n");
py64(igps_rcv_gen_queries, "\t{:received-general-queries/%ju} "
"{N:/general quer%s received}\n");
py64(igps_rcv_group_queries, "\t{:received-group-queries/%ju} "
"{N:/group quer%s received}\n");
py64(igps_rcv_gsr_queries, "\t{:received-group-source-queries/%ju} "
"{N:/group-source quer%s received}\n");
py64(igps_drop_gsr_queries, "\t{:dropped-group-source-queries/%ju} "
"{N:/group-source quer%s dropped}\n");
p64(igps_rcv_reports, "\t{:received-membership-requests/%ju} "
"{N:/membership report%s received}\n");
p64(igps_rcv_badreports, "\t{:dropped-membership-reports/%ju} "
"{N:/membership report%s received with invalid field(s)}\n");
p64(igps_rcv_ourreports, "\t"
"{:received-membership-reports-matching/%ju} "
"{N:/membership report%s received for groups to which we belong}"
"\n");
p64(igps_rcv_nora, "\t{:received-v3-reports-no-router-alert/%ju} "
"{N:/V3 report%s received without Router Alert}\n");
p64(igps_snd_reports, "\t{:sent-membership-reports/%ju} "
"{N:/membership report%s sent}\n");
#undef p64
#undef py64
xo_close_container(name);
}
1994-05-27 12:33:43 +00:00
/*
* Dump PIM statistics structure.
*/
void
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
pim_stats(u_long off __unused, const char *name, int af1 __unused,
int proto __unused)
{
struct pimstat pimstat;
if (fetch_stats("net.inet.pim.stats", off, &pimstat,
sizeof(pimstat), kread_counters) != 0)
return;
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
#define p(f, m) if (pimstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t)pimstat.f, plural(pimstat.f))
#define py(f, m) if (pimstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t)pimstat.f, pimstat.f != 1 ? "ies" : "y")
p(pims_rcv_total_msgs, "\t{:received-messages/%ju} "
"{N:/message%s received}\n");
p(pims_rcv_total_bytes, "\t{:received-bytes/%ju} "
"{N:/byte%s received}\n");
p(pims_rcv_tooshort, "\t{:dropped-too-short/%ju} "
"{N:/message%s received with too few bytes}\n");
p(pims_rcv_badsum, "\t{:dropped-bad-checksum/%ju} "
"{N:/message%s received with bad checksum}\n");
p(pims_rcv_badversion, "\t{:dropped-bad-version/%ju} "
"{N:/message%s received with bad version}\n");
p(pims_rcv_registers_msgs, "\t{:received-data-register-messages/%ju} "
"{N:/data register message%s received}\n");
p(pims_rcv_registers_bytes, "\t{:received-data-register-bytes/%ju} "
"{N:/data register byte%s received}\n");
p(pims_rcv_registers_wrongiif, "\t"
"{:received-data-register-wrong-interface/%ju} "
"{N:/data register message%s received on wrong iif}\n");
p(pims_rcv_badregisters, "\t{:received-bad-registers/%ju} "
"{N:/bad register%s received}\n");
p(pims_snd_registers_msgs, "\t{:sent-data-register-messages/%ju} "
"{N:/data register message%s sent}\n");
p(pims_snd_registers_bytes, "\t{:sent-data-register-bytes/%ju} "
"{N:/data register byte%s sent}\n");
#undef p
#undef py
xo_close_container(name);
}
/*
* Dump divert(4) statistics structure.
*/
void
divert_stats(u_long off, const char *name, int af1 __unused, int proto __unused)
{
struct divstat divstat;
if (fetch_stats("net.inet.divert.stats", off, &divstat,
sizeof(divstat), kread_counters) != 0)
return;
xo_open_container(name);
xo_emit("{T:/%s}:\n", name);
#define p(f, m) if (divstat.f || sflag <= 1) \
xo_emit(m, (uintmax_t)divstat.f, plural(divstat.f))
p(div_diverted, "\t{:diverted-packets/%ju} "
"{N:/packet%s successfully diverted to userland}\n");
p(div_noport, "\t{:noport-fails/%ju} "
"{N:/packet%s failed to divert due to no socket bound at port}\n");
p(div_outbound, "\t{:outbound-packets/%ju} "
"{N:/packet%s successfully re-injected as outbound}\n");
p(div_inbound, "\t{:inbound-packets/%ju} "
"{N:/packet%s successfully re-injected as inbound}\n");
#undef p
xo_close_container(name);
}
#ifdef INET
1994-05-27 12:33:43 +00:00
/*
* Pretty print an Internet address (net address + port).
*/
static void
inetprint(const char *container, struct in_addr *in, int port,
const char *proto, int num_port, const int af1)
1994-05-27 12:33:43 +00:00
{
struct servent *sp = 0;
char line[80], *cp;
int width;
size_t alen, plen;
1994-05-27 12:33:43 +00:00
if (container)
xo_open_container(container);
if (Wflag)
snprintf(line, sizeof(line), "%s.", inetname(in));
else
snprintf(line, sizeof(line), "%.*s.",
(Aflag && !num_port) ? 12 : 16, inetname(in));
alen = strlen(line);
cp = line + alen;
if (!num_port && port)
1994-05-27 12:33:43 +00:00
sp = getservbyport((int)port, proto);
if (sp || port == 0)
snprintf(cp, sizeof(line) - alen,
"%.15s ", sp ? sp->s_name : "*");
else
snprintf(cp, sizeof(line) - alen,
"%d ", ntohs((u_short)port));
width = (Aflag && !Wflag) ? 18 :
((!Wflag || af1 == AF_INET) ? 22 : 45);
if (Wflag)
xo_emit("{d:target/%-*s} ", width, line);
1994-05-27 12:33:43 +00:00
else
xo_emit("{d:target/%-*.*s} ", width, width, line);
plen = strlen(cp) - 1;
alen--;
xo_emit("{e:address/%*.*s}{e:port/%*.*s}", alen, alen, line, plen,
plen, cp);
if (container)
xo_close_container(container);
1994-05-27 12:33:43 +00:00
}
/*
* Construct an Internet address representation.
* If numeric_addr has been supplied, give
1994-05-27 12:33:43 +00:00
* numeric value, otherwise try for symbolic name.
*/
char *
2001-06-15 23:35:13 +00:00
inetname(struct in_addr *inp)
1994-05-27 12:33:43 +00:00
{
char *cp;
static char line[MAXHOSTNAMELEN];
1994-05-27 12:33:43 +00:00
struct hostent *hp;
cp = 0;
if (!numeric_addr && inp->s_addr != INADDR_ANY) {
hp = gethostbyaddr((char *)inp, sizeof (*inp), AF_INET);
if (hp) {
cp = hp->h_name;
trimdomain(cp, strlen(cp));
1994-05-27 12:33:43 +00:00
}
}
if (inp->s_addr == INADDR_ANY)
strcpy(line, "*");
else if (cp) {
2008-10-17 21:14:50 +00:00
strlcpy(line, cp, sizeof(line));
} else {
1994-05-27 12:33:43 +00:00
inp->s_addr = ntohl(inp->s_addr);
#define C(x) ((u_int)((x) & 0xff))
snprintf(line, sizeof(line), "%u.%u.%u.%u",
C(inp->s_addr >> 24), C(inp->s_addr >> 16),
C(inp->s_addr >> 8), C(inp->s_addr));
1994-05-27 12:33:43 +00:00
}
return (line);
}
#endif