freebsd-dev/sys/net80211/ieee80211_ht.c

1473 lines
41 KiB
C
Raw Normal View History

Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*-
* Copyright (c) 2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifdef __FreeBSD__
__FBSDID("$FreeBSD$");
#endif
/*
* IEEE 802.11n protocol support.
*/
#include "opt_inet.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_media.h>
#include <net/ethernet.h>
#include <net80211/ieee80211_var.h>
/* define here, used throughout file */
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
#define SM(_v, _f) (((_v) << _f##_S) & _f)
/* XXX need max array size */
const int ieee80211_htrates[16] = {
13, /* IFM_IEEE80211_MCS0 */
26, /* IFM_IEEE80211_MCS1 */
39, /* IFM_IEEE80211_MCS2 */
52, /* IFM_IEEE80211_MCS3 */
78, /* IFM_IEEE80211_MCS4 */
104, /* IFM_IEEE80211_MCS5 */
117, /* IFM_IEEE80211_MCS6 */
130, /* IFM_IEEE80211_MCS7 */
26, /* IFM_IEEE80211_MCS8 */
52, /* IFM_IEEE80211_MCS9 */
78, /* IFM_IEEE80211_MCS10 */
104, /* IFM_IEEE80211_MCS11 */
156, /* IFM_IEEE80211_MCS12 */
208, /* IFM_IEEE80211_MCS13 */
234, /* IFM_IEEE80211_MCS14 */
260, /* IFM_IEEE80211_MCS15 */
};
static const struct ieee80211_htrateset ieee80211_rateset_11n =
{ 16, {
/* MCS: 6.5 13 19.5 26 39 52 58.5 65 13 26 */
0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
/* 39 52 78 104 117, 130 */
10, 11, 12, 13, 14, 15 }
};
#define IEEE80211_AGGR_TIMEOUT msecs_to_ticks(250)
#define IEEE80211_AGGR_MINRETRY msecs_to_ticks(10*1000)
#define IEEE80211_AGGR_MAXTRIES 3
static int ieee80211_addba_request(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap,
int dialogtoken, int baparamset, int batimeout);
static int ieee80211_addba_response(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap,
int code, int baparamset, int batimeout);
static void ieee80211_addba_stop(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap);
static void ieee80211_aggr_recv_action(struct ieee80211_node *ni,
const uint8_t *frm, const uint8_t *efrm);
void
ieee80211_ht_attach(struct ieee80211com *ic)
{
ic->ic_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_8K;
ic->ic_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_NA;
ic->ic_ampdu_limit = ic->ic_ampdu_rxmax;
ic->ic_amsdu_limit = IEEE80211_HTCAP_MAXAMSDU_3839;
/* setup default aggregation policy */
ic->ic_recv_action = ieee80211_aggr_recv_action;
ic->ic_send_action = ieee80211_send_action;
ic->ic_addba_request = ieee80211_addba_request;
ic->ic_addba_response = ieee80211_addba_response;
ic->ic_addba_stop = ieee80211_addba_stop;
if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA) ||
isset(ic->ic_modecaps, IEEE80211_MODE_11NG)) {
/*
* There are HT channels in the channel list; enable
* all HT-related facilities by default.
* XXX these choices may be too aggressive.
*/
ic->ic_flags_ext |= IEEE80211_FEXT_HT
| IEEE80211_FEXT_HTCOMPAT
;
if (ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI20)
ic->ic_flags_ext |= IEEE80211_FEXT_SHORTGI20;
/* XXX infer from channel list */
if (ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
ic->ic_flags_ext |= IEEE80211_FEXT_USEHT40;
if (ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI40)
ic->ic_flags_ext |= IEEE80211_FEXT_SHORTGI40;
}
/* NB: A-MPDU and A-MSDU rx are mandated, these are tx only */
ic->ic_flags_ext |= IEEE80211_FEXT_AMPDU_RX;
if (ic->ic_htcaps & IEEE80211_HTC_AMPDU)
ic->ic_flags_ext |= IEEE80211_FEXT_AMPDU_TX;
ic->ic_flags_ext |= IEEE80211_FEXT_AMSDU_RX;
if (ic->ic_htcaps & IEEE80211_HTC_AMSDU)
ic->ic_flags_ext |= IEEE80211_FEXT_AMSDU_TX;
}
}
void
ieee80211_ht_detach(struct ieee80211com *ic)
{
}
static void
ht_announce(struct ieee80211com *ic, int mode,
const struct ieee80211_htrateset *rs)
{
struct ifnet *ifp = ic->ic_ifp;
int i, rate, mword;
if_printf(ifp, "%s MCS: ", ieee80211_phymode_name[mode]);
for (i = 0; i < rs->rs_nrates; i++) {
mword = ieee80211_rate2media(ic, rs->rs_rates[i], mode);
if (IFM_SUBTYPE(mword) != IFM_IEEE80211_MCS)
continue;
rate = ieee80211_htrates[rs->rs_rates[i]];
printf("%s%d%sMbps", (i != 0 ? " " : ""),
rate / 2, ((rate & 0x1) != 0 ? ".5" : ""));
}
printf("\n");
}
void
ieee80211_ht_announce(struct ieee80211com *ic)
{
if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA))
ht_announce(ic, IEEE80211_MODE_11NA, &ieee80211_rateset_11n);
if (isset(ic->ic_modecaps, IEEE80211_MODE_11NG))
ht_announce(ic, IEEE80211_MODE_11NG, &ieee80211_rateset_11n);
}
const struct ieee80211_htrateset *
ieee80211_get_suphtrates(struct ieee80211com *ic,
const struct ieee80211_channel *c)
{
if (IEEE80211_IS_CHAN_HT(c))
return &ieee80211_rateset_11n;
/* XXX what's the right thing to do here? */
return (const struct ieee80211_htrateset *)
ieee80211_get_suprates(ic, c);
}
/*
* Receive processing.
*/
/*
* Decap the encapsulated A-MSDU frames and dispatch all but
* the last for delivery. The last frame is returned for
* delivery via the normal path.
*/
struct mbuf *
ieee80211_decap_amsdu(struct ieee80211_node *ni, struct mbuf *m)
{
struct ieee80211com *ic = ni->ni_ic;
int totallen, framelen;
struct mbuf *n;
/* discard 802.3 header inserted by ieee80211_decap */
m_adj(m, sizeof(struct ether_header));
ic->ic_stats.is_amsdu_decap++;
totallen = m->m_pkthdr.len;
for (;;) {
/*
* Decap the first frame, bust it apart from the
* remainder and deliver. We leave the last frame
* delivery to the caller (for consistency with other
* code paths, could also do it here).
*/
m = ieee80211_decap1(m, &framelen);
if (m == NULL) {
IEEE80211_DISCARD_MAC(ic, IEEE80211_MSG_ANY,
ni->ni_macaddr, "a-msdu", "%s", "first decap failed");
ic->ic_stats.is_amsdu_tooshort++;
return NULL;
}
if (framelen == totallen)
break;
n = m_split(m, framelen, M_NOWAIT);
if (n == NULL) {
IEEE80211_DISCARD_MAC(ic, IEEE80211_MSG_ANY,
ni->ni_macaddr, "a-msdu",
"%s", "unable to split encapsulated frames");
ic->ic_stats.is_amsdu_split++;
m_freem(m); /* NB: must reclaim */
return NULL;
}
ieee80211_deliver_data(ic, ni, m);
/*
* Remove frame contents; each intermediate frame
* is required to be aligned to a 4-byte boundary.
*/
m = n;
m_adj(m, roundup2(framelen, 4) - framelen); /* padding */
}
return m; /* last delivered by caller */
}
/*
* Start A-MPDU rx/re-order processing for the specified TID.
*/
static void
ampdu_rx_start(struct ieee80211_rx_ampdu *rap, int bufsiz, int start)
{
memset(rap, 0, sizeof(*rap));
rap->rxa_wnd = (bufsiz == 0) ?
IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX);
rap->rxa_start = start;
rap->rxa_nxt = rap->rxa_start;
rap->rxa_flags |= IEEE80211_AGGR_XCHGPEND;
}
/*
* Purge all frames in the A-MPDU re-order queue.
*/
static void
ampdu_rx_purge(struct ieee80211_rx_ampdu *rap)
{
struct mbuf *m;
int i;
for (i = 0; i < rap->rxa_wnd; i++) {
m = rap->rxa_m[i];
if (m != NULL) {
rap->rxa_m[i] = NULL;
rap->rxa_qbytes -= m->m_pkthdr.len;
m_freem(m);
if (--rap->rxa_qframes == 0)
break;
}
}
KASSERT(rap->rxa_qbytes == 0 && rap->rxa_qframes == 0,
("lost %u data, %u frames on ampdu rx q",
rap->rxa_qbytes, rap->rxa_qframes));
}
/*
* Stop A-MPDU rx processing for the specified TID.
*/
static void
ampdu_rx_stop(struct ieee80211_rx_ampdu *rap)
{
rap->rxa_flags &= ~IEEE80211_AGGR_XCHGPEND;
ampdu_rx_purge(rap);
}
/*
* Dispatch a frame from the A-MPDU reorder queue. The
* frame is fed back into ieee80211_input marked with an
* M_AMPDU flag so it doesn't come back to us (it also
* permits ieee80211_input to optimize re-processing).
*/
static __inline void
ampdu_dispatch(struct ieee80211_node *ni, struct mbuf *m)
{
m->m_flags |= M_AMPDU; /* bypass normal processing */
/* NB: rssi, noise, and rstamp are ignored w/ M_AMPDU set */
(void) ieee80211_input(ni->ni_ic, m, ni, 0, 0, 0);
}
/*
* Dispatch as many frames as possible from the re-order queue.
* Frames will always be "at the front"; we process all frames
* up to the first empty slot in the window. On completion we
* cleanup state if there are still pending frames in the current
* BA window. We assume the frame at slot 0 is already handled
* by the caller; we always start at slot 1.
*/
static void
ampdu_rx_dispatch(struct ieee80211_rx_ampdu *rap, struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct mbuf *m;
int i;
/* flush run of frames */
for (i = 1; i < rap->rxa_wnd; i++) {
m = rap->rxa_m[i];
if (m == NULL)
break;
rap->rxa_m[i] = NULL;
rap->rxa_qbytes -= m->m_pkthdr.len;
rap->rxa_qframes--;
ampdu_dispatch(ni, m);
}
/*
* Adjust the start of the BA window to
* reflect the frames just dispatched.
*/
rap->rxa_start = IEEE80211_SEQ_ADD(rap->rxa_start, i);
rap->rxa_nxt = rap->rxa_start;
ic->ic_stats.is_ampdu_rx_oor += i;
/*
* If frames remain, copy the mbuf pointers down so
* they correspond to the offsets in the new window.
*/
if (rap->rxa_qframes != 0) {
int n = rap->rxa_qframes, j;
for (j = i+1; j < rap->rxa_wnd; j++) {
if (rap->rxa_m[j] != NULL) {
rap->rxa_m[j-i] = rap->rxa_m[j];
rap->rxa_m[j] = NULL;
if (--n == 0)
break;
}
}
KASSERT(n == 0, ("lost %d frames", n));
ic->ic_stats.is_ampdu_rx_copy += rap->rxa_qframes;
}
}
/*
* Dispatch all frames in the A-MPDU
* re-order queue up to the specified slot.
*/
static void
ampdu_rx_flush(struct ieee80211_node *ni,
struct ieee80211_rx_ampdu *rap, int limit)
{
struct mbuf *m;
int i;
for (i = 0; i < limit; i++) {
m = rap->rxa_m[i];
if (m == NULL)
continue;
rap->rxa_m[i] = NULL;
rap->rxa_qbytes -= m->m_pkthdr.len;
ampdu_dispatch(ni, m);
if (--rap->rxa_qframes == 0)
break;
}
}
/*
* Process a received QoS data frame for an HT station. Handle
* A-MPDU reordering: if this frame is received out of order
* and falls within the BA window hold onto it. Otherwise if
* this frame completes a run flush any pending frames. We
* return 1 if the frame is consumed. A 0 is returned if
* the frame should be processed normally by the caller.
*/
int
ieee80211_ampdu_reorder(struct ieee80211_node *ni, struct mbuf *m)
{
#define IEEE80211_FC0_QOSDATA \
(IEEE80211_FC0_TYPE_DATA|IEEE80211_FC0_SUBTYPE_QOS|IEEE80211_FC0_VERSION_0)
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_qosframe *wh;
struct ieee80211_rx_ampdu *rap;
ieee80211_seq rxseq;
uint8_t tid;
int off;
KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta"));
/* NB: m_len known to be sufficient */
wh = mtod(m, struct ieee80211_qosframe *);
KASSERT(wh->i_fc[0] == IEEE80211_FC0_QOSDATA, ("not QoS data"));
/* XXX 4-address frame */
tid = wh->i_qos[0] & IEEE80211_QOS_TID;
rap = &ni->ni_rx_ampdu[tid];
if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) {
/*
* No ADDBA request yet, don't touch.
*/
return 0;
}
rxseq = le16toh(*(uint16_t *)wh->i_seq) >> IEEE80211_SEQ_SEQ_SHIFT;
if (rxseq == rap->rxa_start) {
/*
* First frame in window.
*/
if (rap->rxa_qframes != 0) {
/*
* Dispatch as many packets as we can.
*/
KASSERT(rap->rxa_m[0] == NULL, ("unexpected dup"));
ampdu_dispatch(ni, m);
ampdu_rx_dispatch(rap, ni);
return 1; /* NB: consumed */
} else {
/*
* In order; advance window and notify
* caller to dispatch directly.
*/
rap->rxa_start = IEEE80211_SEQ_INC(rxseq);
rap->rxa_nxt = rap->rxa_start;
return 0; /* NB: process packet */
}
}
/*
* This packet is out of order; store it
* if it's in the BA window.
*/
/* calculate offset in BA window */
off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start);
if (off >= rap->rxa_wnd) {
/*
* Outside the window, clear the q and start over.
*
* NB: this handles the case where rxseq is before
* rxa_start because our max BA window is 64
* and the sequence number range is 4096.
*/
IEEE80211_NOTE(ic, IEEE80211_MSG_11N, ni,
"flush BA win <%u:%u> (%u frames) rxseq %u tid %u",
rap->rxa_start,
IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd),
rap->rxa_qframes, rxseq, tid);
if (rap->rxa_qframes != 0) {
ic->ic_stats.is_ampdu_rx_oor += rap->rxa_qframes;
ampdu_rx_flush(ni, rap, rap->rxa_wnd);
KASSERT(rap->rxa_qbytes == 0 && rap->rxa_qframes == 0,
("lost %u data, %u frames on ampdu rx q",
rap->rxa_qbytes, rap->rxa_qframes));
}
rap->rxa_start = IEEE80211_SEQ_INC(rxseq);
rap->rxa_nxt = rap->rxa_start;
return 0; /* NB: process packet */
}
if (rap->rxa_qframes != 0) {
#if 0
/* XXX honor batimeout? */
if (ticks - mn->mn_age[tid] > 50) {
/*
* Too long since we received the first frame; flush.
*/
if (rap->rxa_qframes != 0) {
ic->ic_stats.is_ampdu_rx_oor +=
rap->rxa_qframes;
ampdu_rx_flush(ni, rap, rap->rxa_wnd);
}
rap->rxa_start = IEEE80211_SEQ_INC(rxseq);
rap->rxa_nxt = rap->rxa_start;
return 0; /* NB: process packet */
}
#endif
rap->rxa_nxt = rxseq;
} else {
/*
* First frame, start aging timer.
*/
#if 0
mn->mn_age[tid] = ticks;
#endif
}
/* save packet */
if (rap->rxa_m[off] == NULL) {
rap->rxa_m[off] = m;
rap->rxa_qframes++;
rap->rxa_qbytes += m->m_pkthdr.len;
} else {
IEEE80211_DISCARD_MAC(ic,
IEEE80211_MSG_INPUT | IEEE80211_MSG_11N,
ni->ni_macaddr, "a-mpdu duplicate",
"seqno %u tid %u BA win <%u:%u>",
rxseq, tid, rap->rxa_start, rap->rxa_wnd);
ic->ic_stats.is_rx_dup++;
IEEE80211_NODE_STAT(ni, rx_dup);
m_freem(m);
}
return 1; /* NB: consumed */
#undef IEEE80211_FC0_QOSDATA
}
/*
* Process a BAR ctl frame. Dispatch all frames up to
* the sequence number of the frame. If this frame is
* out of the window it's discarded.
*/
void
ieee80211_recv_bar(struct ieee80211_node *ni, struct mbuf *m0)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame_bar *wh;
struct ieee80211_rx_ampdu *rap;
ieee80211_seq rxseq;
int tid, off;
wh = mtod(m0, struct ieee80211_frame_bar *);
/* XXX check basic BAR */
tid = MS(le16toh(wh->i_ctl), IEEE80211_BAR_TID);
rap = &ni->ni_rx_ampdu[tid];
if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) {
/*
* No ADDBA request yet, don't touch.
*/
IEEE80211_DISCARD_MAC(ic,
IEEE80211_MSG_INPUT | IEEE80211_MSG_11N,
ni->ni_macaddr, "BAR", "no BA stream, tid %u", tid);
ic->ic_stats.is_ampdu_bar_bad++;
return;
}
ic->ic_stats.is_ampdu_bar_rx++;
rxseq = le16toh(wh->i_seq) >> IEEE80211_SEQ_SEQ_SHIFT;
/* calculate offset in BA window */
off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start);
if (off >= rap->rxa_wnd) {
/*
* Outside the window, flush the reorder q if
* not pulling the sequence # backward. The
* latter is typically caused by a dropped BA.
*/
IEEE80211_NOTE(ic, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni,
"recv BAR outside BA win <%u:%u> rxseq %u tid %u",
rap->rxa_start,
IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd),
rxseq, tid);
ic->ic_stats.is_ampdu_bar_oow++;
if (rxseq < rap->rxa_start) {
/* XXX stat? */
return;
}
if (rap->rxa_qframes != 0) {
ic->ic_stats.is_ampdu_rx_oor += rap->rxa_qframes;
ampdu_rx_flush(ni, rap, rap->rxa_wnd);
KASSERT(rap->rxa_qbytes == 0 && rap->rxa_qframes == 0,
("lost %u data, %u frames on ampdu rx q",
rap->rxa_qbytes, rap->rxa_qframes));
}
} else if (rap->rxa_qframes != 0) {
/*
* Dispatch packets up to rxseq.
*/
ampdu_rx_flush(ni, rap, off);
ic->ic_stats.is_ampdu_rx_oor += off;
/*
* If frames remain, copy the mbuf pointers down so
* they correspond to the offsets in the new window.
*/
if (rap->rxa_qframes != 0) {
int n = rap->rxa_qframes, j;
for (j = off+1; j < rap->rxa_wnd; j++) {
if (rap->rxa_m[j] != NULL) {
rap->rxa_m[j-off] = rap->rxa_m[j];
rap->rxa_m[j] = NULL;
if (--n == 0)
break;
}
}
KASSERT(n == 0, ("lost %d frames", n));
ic->ic_stats.is_ampdu_rx_copy += rap->rxa_qframes;
}
}
rap->rxa_start = rxseq;
rap->rxa_nxt = rap->rxa_start;
}
/*
* Setup HT-specific state in a node. Called only
* when HT use is negotiated so we don't do extra
* work for temporary and/or legacy sta's.
*/
void
ieee80211_ht_node_init(struct ieee80211_node *ni, const uint8_t *htcap)
{
struct ieee80211_tx_ampdu *tap;
int ac;
ieee80211_parse_htcap(ni, htcap);
for (ac = 0; ac < WME_NUM_AC; ac++) {
tap = &ni->ni_tx_ampdu[ac];
tap->txa_ac = ac;
}
ni->ni_flags |= IEEE80211_NODE_HT;
}
/*
* Cleanup HT-specific state in a node. Called only
* when HT use has been marked.
*/
void
ieee80211_ht_node_cleanup(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
int i;
KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT node"));
/* XXX optimize this */
for (i = 0; i < WME_NUM_AC; i++) {
struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[i];
if (IEEE80211_AMPDU_REQUESTED(tap))
ic->ic_addba_stop(ni, &ni->ni_tx_ampdu[i]);
}
for (i = 0; i < WME_NUM_TID; i++)
ampdu_rx_stop(&ni->ni_rx_ampdu[i]);
ni->ni_htcap = 0;
ni->ni_flags &= ~(IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT);
}
/* unalligned little endian access */
#define LE_READ_2(p) \
((uint16_t) \
((((const uint8_t *)(p))[0] ) | \
(((const uint8_t *)(p))[1] << 8)))
/*
* Process an 802.11n HT capabilities ie.
*/
void
ieee80211_parse_htcap(struct ieee80211_node *ni, const uint8_t *ie)
{
struct ieee80211com *ic = ni->ni_ic;
if (ie[0] == IEEE80211_ELEMID_VENDOR) {
/*
* Station used Vendor OUI ie to associate;
* mark the node so when we respond we'll use
* the Vendor OUI's and not the standard ie's.
*/
ni->ni_flags |= IEEE80211_NODE_HTCOMPAT;
ie += 4;
} else
ni->ni_flags &= ~IEEE80211_NODE_HTCOMPAT;
ni->ni_htcap = LE_READ_2(ie +
__offsetof(struct ieee80211_ie_htcap, hc_cap));
if ((ic->ic_flags_ext & IEEE80211_FEXT_SHORTGI40) == 0)
ni->ni_htcap &= ~IEEE80211_HTCAP_SHORTGI40;
if ((ic->ic_flags_ext & IEEE80211_FEXT_SHORTGI20) == 0)
ni->ni_htcap &= ~IEEE80211_HTCAP_SHORTGI20;
ni->ni_chw = (ni->ni_htcap & IEEE80211_HTCAP_CHWIDTH40) ? 40 : 20;
ni->ni_htparam = ie[__offsetof(struct ieee80211_ie_htcap, hc_param)];
#if 0
ni->ni_maxampdu =
(8*1024) << MS(ni->ni_htparam, IEEE80211_HTCAP_MAXRXAMPDU);
ni->ni_mpdudensity = MS(ni->ni_htparam, IEEE80211_HTCAP_MPDUDENSITY);
#endif
}
/*
* Process an 802.11n HT info ie.
*/
void
ieee80211_parse_htinfo(struct ieee80211_node *ni, const uint8_t *ie)
{
const struct ieee80211_ie_htinfo *htinfo;
uint16_t w;
int chw;
if (ie[0] == IEEE80211_ELEMID_VENDOR)
ie += 4;
htinfo = (const struct ieee80211_ie_htinfo *) ie;
ni->ni_htctlchan = htinfo->hi_ctrlchannel;
ni->ni_ht2ndchan = SM(htinfo->hi_byte1, IEEE80211_HTINFO_2NDCHAN);
w = LE_READ_2(&htinfo->hi_byte2);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_htopmode = SM(w, IEEE80211_HTINFO_OPMODE);
w = LE_READ_2(&htinfo->hi_byte45);
ni->ni_htstbc = SM(w, IEEE80211_HTINFO_BASIC_STBCMCS);
/* update node's recommended tx channel width */
chw = (htinfo->hi_byte1 & IEEE80211_HTINFO_TXWIDTH_2040) ? 40 : 20;
if (chw != ni->ni_chw) {
ni->ni_chw = chw;
ni->ni_flags |= IEEE80211_NODE_CHWUPDATE;
}
}
/*
* Install received HT rate set by parsing the HT cap ie.
*/
int
ieee80211_setup_htrates(struct ieee80211_node *ni, const uint8_t *ie, int flags)
{
struct ieee80211com *ic = ni->ni_ic;
const struct ieee80211_ie_htcap *htcap;
struct ieee80211_htrateset *rs;
int i;
rs = &ni->ni_htrates;
memset(rs, 0, sizeof(*rs));
if (ie != NULL) {
if (ie[0] == IEEE80211_ELEMID_VENDOR)
ie += 4;
htcap = (const struct ieee80211_ie_htcap *) ie;
for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) {
if (isclr(htcap->hc_mcsset, i))
continue;
if (rs->rs_nrates == IEEE80211_HTRATE_MAXSIZE) {
IEEE80211_NOTE(ic,
IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni,
"WARNING, HT rate set too large; only "
"using %u rates", IEEE80211_HTRATE_MAXSIZE);
ic->ic_stats.is_rx_rstoobig++;
break;
}
rs->rs_rates[rs->rs_nrates++] = i;
}
}
return ieee80211_fix_rate(ni, (struct ieee80211_rateset *) rs, flags);
}
/*
* Mark rates in a node's HT rate set as basic according
* to the information in the supplied HT info ie.
*/
void
ieee80211_setup_basic_htrates(struct ieee80211_node *ni, const uint8_t *ie)
{
const struct ieee80211_ie_htinfo *htinfo;
struct ieee80211_htrateset *rs;
int i, j;
if (ie[0] == IEEE80211_ELEMID_VENDOR)
ie += 4;
htinfo = (const struct ieee80211_ie_htinfo *) ie;
rs = &ni->ni_htrates;
if (rs->rs_nrates == 0) {
IEEE80211_NOTE(ni->ni_ic,
IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni,
"%s", "WARNING, empty HT rate set");
return;
}
for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) {
if (isclr(htinfo->hi_basicmcsset, i))
continue;
for (j = 0; j < rs->rs_nrates; j++)
if ((rs->rs_rates[j] & IEEE80211_RATE_VAL) == i)
rs->rs_rates[j] |= IEEE80211_RATE_BASIC;
}
}
static void
addba_timeout(void *arg)
{
struct ieee80211_tx_ampdu *tap = arg;
/* XXX ? */
tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND;
tap->txa_attempts++;
}
static void
addba_start_timeout(struct ieee80211_tx_ampdu *tap)
{
/* XXX use CALLOUT_PENDING instead? */
callout_reset(&tap->txa_timer, IEEE80211_AGGR_TIMEOUT,
addba_timeout, tap);
tap->txa_flags |= IEEE80211_AGGR_XCHGPEND;
tap->txa_lastrequest = ticks;
}
static void
addba_stop_timeout(struct ieee80211_tx_ampdu *tap)
{
/* XXX use CALLOUT_PENDING instead? */
if (tap->txa_flags & IEEE80211_AGGR_XCHGPEND) {
callout_stop(&tap->txa_timer);
tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND;
}
}
/*
* Default method for requesting A-MPDU tx aggregation.
* We setup the specified state block and start a timer
* to wait for an ADDBA response frame.
*/
static int
ieee80211_addba_request(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap,
int dialogtoken, int baparamset, int batimeout)
{
int bufsiz;
/* XXX locking */
tap->txa_token = dialogtoken;
tap->txa_flags |= IEEE80211_AGGR_IMMEDIATE;
tap->txa_start = tap->txa_seqstart = 0;
bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
tap->txa_wnd = (bufsiz == 0) ?
IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX);
addba_start_timeout(tap);
return 1;
}
/*
* Default method for processing an A-MPDU tx aggregation
* response. We shutdown any pending timer and update the
* state block according to the reply.
*/
static int
ieee80211_addba_response(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap,
int status, int baparamset, int batimeout)
{
int bufsiz;
/* XXX locking */
addba_stop_timeout(tap);
if (status == IEEE80211_STATUS_SUCCESS) {
bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
/* XXX override our request? */
tap->txa_wnd = (bufsiz == 0) ?
IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX);
tap->txa_flags |= IEEE80211_AGGR_RUNNING;
}
return 1;
}
/*
* Default method for stopping A-MPDU tx aggregation.
* Any timer is cleared and we drain any pending frames.
*/
static void
ieee80211_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap)
{
/* XXX locking */
addba_stop_timeout(tap);
if (tap->txa_flags & IEEE80211_AGGR_RUNNING) {
/* clear aggregation queue */
ieee80211_drain_ifq(&tap->txa_q);
tap->txa_flags &= ~IEEE80211_AGGR_RUNNING;
}
tap->txa_attempts = 0;
}
/*
* Process a received action frame using the default aggregation
* policy. We intercept ADDBA-related frames and use them to
* update our aggregation state. All other frames are passed up
* for processing by ieee80211_recv_action.
*/
static void
ieee80211_aggr_recv_action(struct ieee80211_node *ni,
const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211com *ic = ni->ni_ic;
const struct ieee80211_action *ia;
struct ieee80211_rx_ampdu *rap;
struct ieee80211_tx_ampdu *tap;
uint8_t dialogtoken;
uint16_t baparamset, batimeout, baseqctl, code;
uint16_t args[4];
int tid, ac, bufsiz;
ia = (const struct ieee80211_action *) frm;
switch (ia->ia_category) {
case IEEE80211_ACTION_CAT_BA:
switch (ia->ia_action) {
case IEEE80211_ACTION_BA_ADDBA_REQUEST:
dialogtoken = frm[2];
baparamset = LE_READ_2(frm+3);
batimeout = LE_READ_2(frm+5);
baseqctl = LE_READ_2(frm+7);
tid = MS(baparamset, IEEE80211_BAPS_TID);
bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"recv ADDBA request: dialogtoken %u "
"baparamset 0x%x (tid %d bufsiz %d) batimeout %d "
"baseqctl %d",
dialogtoken, baparamset, tid, bufsiz,
batimeout, baseqctl);
rap = &ni->ni_rx_ampdu[tid];
/* Send ADDBA response */
args[0] = dialogtoken;
if (ic->ic_flags_ext & IEEE80211_FEXT_AMPDU_RX) {
ampdu_rx_start(rap, bufsiz,
MS(baseqctl, IEEE80211_BASEQ_START));
args[1] = IEEE80211_STATUS_SUCCESS;
} else
args[1] = IEEE80211_STATUS_UNSPECIFIED;
/* XXX honor rap flags? */
args[2] = IEEE80211_BAPS_POLICY_IMMEDIATE
| SM(tid, IEEE80211_BAPS_TID)
| SM(rap->rxa_wnd, IEEE80211_BAPS_BUFSIZ)
;
args[3] = 0;
ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA,
IEEE80211_ACTION_BA_ADDBA_RESPONSE, args);
return;
case IEEE80211_ACTION_BA_ADDBA_RESPONSE:
dialogtoken = frm[2];
code = LE_READ_2(frm+3);
baparamset = LE_READ_2(frm+5);
tid = MS(baparamset, IEEE80211_BAPS_TID);
bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
batimeout = LE_READ_2(frm+7);
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"recv ADDBA response: dialogtoken %u code %d "
"baparamset 0x%x (tid %d bufsiz %d) batimeout %d",
dialogtoken, code, baparamset, tid, bufsiz,
batimeout);
ac = TID_TO_WME_AC(tid);
tap = &ni->ni_tx_ampdu[ac];
ic->ic_addba_response(ni, tap,
code, baparamset, batimeout);
return;
case IEEE80211_ACTION_BA_DELBA:
baparamset = LE_READ_2(frm+2);
code = LE_READ_2(frm+4);
tid = MS(baparamset, IEEE80211_DELBAPS_TID);
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"recv DELBA: baparamset 0x%x (tid %d initiator %d) "
"code %d", baparamset, tid,
MS(baparamset, IEEE80211_DELBAPS_INIT), code);
if ((baparamset & IEEE80211_DELBAPS_INIT) == 0) {
ac = TID_TO_WME_AC(tid);
tap = &ni->ni_tx_ampdu[ac];
ic->ic_addba_stop(ni, tap);
} else {
rap = &ni->ni_rx_ampdu[tid];
ampdu_rx_stop(rap);
}
return;
}
break;
}
return ieee80211_recv_action(ni, frm, efrm);
}
/*
* Process a received 802.11n action frame.
* Aggregation-related frames are assumed to be handled
* already; we handle any other frames we can, otherwise
* complain about being unsupported (with debugging).
*/
void
ieee80211_recv_action(struct ieee80211_node *ni,
const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211com *ic = ni->ni_ic;
const struct ieee80211_action *ia;
int chw;
ia = (const struct ieee80211_action *) frm;
switch (ia->ia_category) {
case IEEE80211_ACTION_CAT_BA:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"%s: BA action %d not implemented", __func__,
ia->ia_action);
ic->ic_stats.is_rx_mgtdiscard++;
break;
case IEEE80211_ACTION_CAT_HT:
switch (ia->ia_action) {
case IEEE80211_ACTION_HT_TXCHWIDTH:
chw = frm[2] == IEEE80211_A_HT_TXCHWIDTH_2040 ? 40 : 20;
if (chw != ni->ni_chw) {
ni->ni_chw = chw;
ni->ni_flags |= IEEE80211_NODE_CHWUPDATE;
}
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"%s: HT txchwidth. width %d (%s)",
__func__, chw,
ni->ni_flags & IEEE80211_NODE_CHWUPDATE ?
"new" : "no change");
break;
default:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"%s: HT action %d not implemented", __func__,
ia->ia_action);
ic->ic_stats.is_rx_mgtdiscard++;
break;
}
break;
default:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"%s: category %d not implemented", __func__,
ia->ia_category);
ic->ic_stats.is_rx_mgtdiscard++;
break;
}
}
/*
* Transmit processing.
*/
/*
* Request A-MPDU tx aggregation. Setup local state and
* issue an ADDBA request. BA use will only happen after
* the other end replies with ADDBA response.
*/
int
ieee80211_ampdu_request(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap)
{
struct ieee80211com *ic = ni->ni_ic;
uint16_t args[4];
int tid, dialogtoken;
static int tokens = 0; /* XXX */
/* XXX locking */
if ((tap->txa_flags & IEEE80211_AGGR_SETUP) == 0) {
/* do deferred setup of state */
/* XXX tap->txa_q */
callout_init(&tap->txa_timer, CALLOUT_MPSAFE);
tap->txa_flags |= IEEE80211_AGGR_SETUP;
}
if (tap->txa_attempts >= IEEE80211_AGGR_MAXTRIES &&
(ticks - tap->txa_lastrequest) < IEEE80211_AGGR_MINRETRY) {
/*
* Don't retry too often; IEEE80211_AGGR_MINRETRY
* defines the minimum interval we'll retry after
* IEEE80211_AGGR_MAXTRIES failed attempts to
* negotiate use.
*/
return 0;
}
dialogtoken = (tokens+1) % 63; /* XXX */
tid = WME_AC_TO_TID(tap->txa_ac);
args[0] = dialogtoken;
args[1] = IEEE80211_BAPS_POLICY_IMMEDIATE
| SM(tid, IEEE80211_BAPS_TID)
| SM(IEEE80211_AGGR_BAWMAX, IEEE80211_BAPS_BUFSIZ)
;
args[2] = 0; /* batimeout */
args[3] = SM(0, IEEE80211_BASEQ_START)
| SM(0, IEEE80211_BASEQ_FRAG)
;
/* NB: do first so there's no race against reply */
if (!ic->ic_addba_request(ni, tap, dialogtoken, args[1], args[2])) {
/* unable to setup state, don't make request */
return 0;
}
tokens = dialogtoken; /* allocate token */
return ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA,
IEEE80211_ACTION_BA_ADDBA_REQUEST, args);
}
/*
* Transmit a BAR frame to the specified node. The
* BAR contents are drawn from the supplied aggregation
* state associated with the node.
*/
int
ieee80211_send_bar(struct ieee80211_node *ni,
const struct ieee80211_tx_ampdu *tap)
{
#define senderr(_x, _v) do { ic->ic_stats._v++; ret = _x; goto bad; } while (0)
#define ADDSHORT(frm, v) do { \
frm[0] = (v) & 0xff; \
frm[1] = (v) >> 8; \
frm += 2; \
} while (0)
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_frame_min *wh;
struct mbuf *m;
uint8_t *frm;
uint16_t barctl, barseqctl;
int tid, ret;
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame_min),
sizeof(struct ieee80211_ba_request)
);
if (m == NULL)
senderr(ENOMEM, is_tx_nobuf);
wh = mtod(m, struct ieee80211_frame_min *);
wh->i_fc[0] = IEEE80211_FC0_VERSION_0 |
IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR;
wh->i_fc[1] = 0;
IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr);
IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr);
tid = WME_AC_TO_TID(tap->txa_ac);
barctl = (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE ?
IEEE80211_BAPS_POLICY_IMMEDIATE :
IEEE80211_BAPS_POLICY_DELAYED)
| SM(tid, IEEE80211_BAPS_TID)
| SM(tap->txa_wnd, IEEE80211_BAPS_BUFSIZ)
;
barseqctl = SM(tap->txa_start, IEEE80211_BASEQ_START)
| SM(0, IEEE80211_BASEQ_FRAG)
;
ADDSHORT(frm, barctl);
ADDSHORT(frm, barseqctl);
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
IEEE80211_NODE_STAT(ni, tx_mgmt); /* XXX tx_ctl? */
IEEE80211_DPRINTF(ic, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS,
"[%s] send bar frame (tid %u start %u) on channel %u\n",
ether_sprintf(ni->ni_macaddr), tid, tap->txa_start,
ieee80211_chan2ieee(ic, ic->ic_curchan));
m->m_pkthdr.rcvif = (void *)ni;
IF_ENQUEUE(&ic->ic_mgtq, m); /* cheat */
(*ifp->if_start)(ifp);
return 0;
bad:
ieee80211_free_node(ni);
return ret;
#undef ADDSHORT
#undef senderr
}
/*
* Send an action management frame. The arguments are stuff
* into a frame without inspection; the caller is assumed to
* prepare them carefully (e.g. based on the aggregation state).
*/
int
ieee80211_send_action(struct ieee80211_node *ni,
int category, int action, uint16_t args[4])
{
#define senderr(_x, _v) do { ic->ic_stats._v++; ret = _x; goto bad; } while (0)
#define ADDSHORT(frm, v) do { \
frm[0] = (v) & 0xff; \
frm[1] = (v) >> 8; \
frm += 2; \
} while (0)
struct ieee80211com *ic = ni->ni_ic;
struct mbuf *m;
uint8_t *frm;
uint16_t baparamset;
int ret;
KASSERT(ni != NULL, ("null node"));
/*
* Hold a reference on the node so it doesn't go away until after
* the xmit is complete all the way in the driver. On error we
* will remove our reference.
*/
IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE,
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n",
__func__, __LINE__,
ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni)+1);
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame),
sizeof(uint16_t) /* action+category */
/* XXX may action payload */
+ sizeof(struct ieee80211_action_ba_addbaresponse)
);
if (m == NULL)
senderr(ENOMEM, is_tx_nobuf);
*frm++ = category;
*frm++ = action;
switch (category) {
case IEEE80211_ACTION_CAT_BA:
switch (action) {
case IEEE80211_ACTION_BA_ADDBA_REQUEST:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"send ADDBA request: tid %d, baparamset 0x%x",
args[0], args[1]);
*frm++ = args[0]; /* dialog token */
ADDSHORT(frm, args[1]); /* baparamset */
ADDSHORT(frm, args[2]); /* batimeout */
ADDSHORT(frm, args[3]); /* baseqctl */
break;
case IEEE80211_ACTION_BA_ADDBA_RESPONSE:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"send ADDBA response: dialogtoken %d status %d "
"baparamset 0x%x (tid %d) batimeout %d",
args[0], args[1], args[2],
MS(args[2], IEEE80211_BAPS_TID), args[3]);
*frm++ = args[0]; /* dialog token */
ADDSHORT(frm, args[1]); /* statuscode */
ADDSHORT(frm, args[2]); /* baparamset */
ADDSHORT(frm, args[3]); /* batimeout */
break;
case IEEE80211_ACTION_BA_DELBA:
/* XXX */
baparamset = SM(args[0], IEEE80211_DELBAPS_TID)
| SM(args[1], IEEE80211_DELBAPS_INIT)
;
ADDSHORT(frm, baparamset);
ADDSHORT(frm, args[2]); /* reason code */
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"send DELBA action: tid %d, initiator %d reason %d",
args[0], args[1], args[2]);
break;
default:
goto badaction;
}
break;
case IEEE80211_ACTION_CAT_HT:
switch (action) {
case IEEE80211_ACTION_HT_TXCHWIDTH:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
ni, "send HT txchwidth: width %d",
IEEE80211_IS_CHAN_HT40(ic->ic_bsschan) ? 40 : 20
);
*frm++ = IEEE80211_IS_CHAN_HT40(ic->ic_bsschan) ?
IEEE80211_A_HT_TXCHWIDTH_2040 :
IEEE80211_A_HT_TXCHWIDTH_20;
break;
default:
goto badaction;
}
break;
default:
badaction:
IEEE80211_NOTE(ic,
IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
"%s: unsupported category %d action %d", __func__,
category, action);
senderr(EINVAL, is_tx_unknownmgt);
/* NOTREACHED */
}
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
ret = ieee80211_mgmt_output(ic, ni, m, IEEE80211_FC0_SUBTYPE_ACTION);
if (ret != 0)
goto bad;
return 0;
bad:
ieee80211_free_node(ni);
return ret;
#undef ADDSHORT
#undef senderr
}
/*
* Construct the MCS bit mask for inclusion
* in an HT information element.
*/
static void
ieee80211_set_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs)
{
int i;
for (i = 0; i < rs->rs_nrates; i++) {
int r = rs->rs_rates[i] & IEEE80211_RATE_VAL;
if (r < IEEE80211_HTRATE_MAXSIZE) { /* XXX? */
/* NB: this assumes a particular implementation */
setbit(frm, r);
}
}
}
/*
* Add body of an HTCAP information element.
*/
static uint8_t *
ieee80211_add_htcap_body(uint8_t *frm, struct ieee80211_node *ni)
{
#define ADDSHORT(frm, v) do { \
frm[0] = (v) & 0xff; \
frm[1] = (v) >> 8; \
frm += 2; \
} while (0)
struct ieee80211com *ic = ni->ni_ic;
uint16_t caps;
/* HT capabilities */
caps = ic->ic_htcaps & 0xffff;
/* override 20/40 use based on channel and config */
if (IEEE80211_IS_CHAN_HT40(ic->ic_bsschan) &&
(ic->ic_flags_ext & IEEE80211_FEXT_USEHT40))
caps |= IEEE80211_HTCAP_CHWIDTH40;
else
caps &= ~IEEE80211_HTCAP_CHWIDTH40;
/* adjust short GI based on channel and config */
if ((ic->ic_flags_ext & IEEE80211_FEXT_SHORTGI20) == 0)
caps &= ~IEEE80211_HTCAP_SHORTGI20;
if ((ic->ic_flags_ext & IEEE80211_FEXT_SHORTGI40) == 0 ||
(caps & IEEE80211_HTCAP_CHWIDTH40) == 0)
caps &= ~IEEE80211_HTCAP_SHORTGI40;
ADDSHORT(frm, caps);
/* HT parameters */
switch (ic->ic_ampdu_rxmax / 1024) {
case 8: *frm = IEEE80211_HTCAP_MAXRXAMPDU_8K; break;
case 16: *frm = IEEE80211_HTCAP_MAXRXAMPDU_16K; break;
case 32: *frm = IEEE80211_HTCAP_MAXRXAMPDU_32K; break;
default: *frm = IEEE80211_HTCAP_MAXRXAMPDU_64K; break;
}
*frm |= SM(ic->ic_ampdu_density, IEEE80211_HTCAP_MPDUDENSITY);
frm++;
/* pre-zero remainder of ie */
memset(frm, 0, sizeof(struct ieee80211_ie_htcap) -
__offsetof(struct ieee80211_ie_htcap, hc_mcsset));
/* supported MCS set */
ieee80211_set_htrates(frm, &ni->ni_htrates);
frm += sizeof(struct ieee80211_ie_htcap) -
__offsetof(struct ieee80211_ie_htcap, hc_mcsset);
return frm;
#undef ADDSHORT
}
/*
* Add 802.11n HT capabilities information element
*/
uint8_t *
ieee80211_add_htcap(uint8_t *frm, struct ieee80211_node *ni)
{
frm[0] = IEEE80211_ELEMID_HTCAP;
frm[1] = sizeof(struct ieee80211_ie_htcap) - 2;
return ieee80211_add_htcap_body(frm + 2, ni);
}
/*
* Add Broadcom OUI wrapped standard HTCAP ie; this is
* used for compatibility w/ pre-draft implementations.
*/
uint8_t *
ieee80211_add_htcap_vendor(uint8_t *frm, struct ieee80211_node *ni)
{
frm[0] = IEEE80211_ELEMID_VENDOR;
frm[1] = 4 + sizeof(struct ieee80211_ie_htcap) - 2;
frm[2] = (BCM_OUI >> 0) & 0xff;
frm[3] = (BCM_OUI >> 8) & 0xff;
frm[4] = (BCM_OUI >> 16) & 0xff;
frm[5] = BCM_OUI_HTCAP;
return ieee80211_add_htcap_body(frm + 6, ni);
}
/*
* Construct the MCS bit mask of basic rates
* for inclusion in an HT information element.
*/
static void
ieee80211_set_basic_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs)
{
int i;
for (i = 0; i < rs->rs_nrates; i++) {
int r = rs->rs_rates[i] & IEEE80211_RATE_VAL;
if ((rs->rs_rates[i] & IEEE80211_RATE_BASIC) &&
r < IEEE80211_HTRATE_MAXSIZE) {
/* NB: this assumes a particular implementation */
setbit(frm, r);
}
}
}
/*
* Add body of an HTINFO information element.
*/
static uint8_t *
ieee80211_add_htinfo_body(uint8_t *frm, struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
/* pre-zero remainder of ie */
memset(frm, 0, sizeof(struct ieee80211_ie_htinfo) - 2);
/* primary/control channel center */
*frm++ = ieee80211_chan2ieee(ic, ic->ic_bsschan);
frm[0] = IEEE80211_HTINFO_RIFSMODE_PROH;
if (IEEE80211_IS_CHAN_HT40U(ic->ic_bsschan))
frm[0] |= IEEE80211_HTINFO_2NDCHAN_ABOVE;
else if (IEEE80211_IS_CHAN_HT40D(ic->ic_bsschan))
frm[0] |= IEEE80211_HTINFO_2NDCHAN_BELOW;
else
frm[0] |= IEEE80211_HTINFO_2NDCHAN_NONE;
if (IEEE80211_IS_CHAN_HT40(ic->ic_bsschan))
frm[0] |= IEEE80211_HTINFO_TXWIDTH_2040;
frm[1] = (ic->ic_flags_ext & IEEE80211_FEXT_PUREN) ?
IEEE80211_HTINFO_OPMODE_PURE : IEEE80211_HTINFO_OPMODE_MIXED;
/* XXX IEEE80211_HTINFO_NONHT_PRESENT */
frm += 5;
/* basic MCS set */
ieee80211_set_basic_htrates(frm, &ni->ni_htrates);
frm += sizeof(struct ieee80211_ie_htinfo) -
__offsetof(struct ieee80211_ie_htinfo, hi_basicmcsset);
return frm;
}
/*
* Add 802.11n HT information information element.
*/
uint8_t *
ieee80211_add_htinfo(uint8_t *frm, struct ieee80211_node *ni)
{
frm[0] = IEEE80211_ELEMID_HTINFO;
frm[1] = sizeof(struct ieee80211_ie_htinfo) - 2;
return ieee80211_add_htinfo_body(frm + 2, ni);
}
/*
* Add Broadcom OUI wrapped standard HTINFO ie; this is
* used for compatibility w/ pre-draft implementations.
*/
uint8_t *
ieee80211_add_htinfo_vendor(uint8_t *frm, struct ieee80211_node *ni)
{
frm[0] = IEEE80211_ELEMID_VENDOR;
frm[1] = 4 + sizeof(struct ieee80211_ie_htinfo) - 2;
frm[2] = (BCM_OUI >> 0) & 0xff;
frm[3] = (BCM_OUI >> 8) & 0xff;
frm[4] = (BCM_OUI >> 16) & 0xff;
frm[5] = BCM_OUI_HTINFO;
return ieee80211_add_htinfo_body(frm + 6, ni);
}