freebsd-dev/sys/dev/aac/aac.c

2991 lines
75 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2001 Scott Long
* Copyright (c) 2000 BSDi
* Copyright (c) 2001 Adaptec, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Adaptec 'FSA' family of PCI/SCSI RAID adapters.
*/
#include "opt_aac.h"
/* #include <stddef.h> */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/sysctl.h>
#include <sys/poll.h>
#include <sys/ioccom.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/signalvar.h>
#include <sys/time.h>
#include <sys/eventhandler.h>
#include <machine/bus_memio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/aac/aacreg.h>
#include <dev/aac/aac_ioctl.h>
#include <dev/aac/aacvar.h>
#include <dev/aac/aac_tables.h>
static void aac_startup(void *arg);
static void aac_add_container(struct aac_softc *sc,
struct aac_mntinforesp *mir, int f);
static void aac_get_bus_info(struct aac_softc *sc);
/* Command Processing */
static void aac_timeout(struct aac_softc *sc);
static int aac_map_command(struct aac_command *cm);
static void aac_complete(void *context, int pending);
static int aac_bio_command(struct aac_softc *sc, struct aac_command **cmp);
static void aac_bio_complete(struct aac_command *cm);
static int aac_wait_command(struct aac_command *cm, int timeout);
static void aac_command_thread(struct aac_softc *sc);
/* Command Buffer Management */
static void aac_map_command_sg(void *arg, bus_dma_segment_t *segs,
int nseg, int error);
static void aac_map_command_helper(void *arg, bus_dma_segment_t *segs,
int nseg, int error);
static int aac_alloc_commands(struct aac_softc *sc);
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
static void aac_free_commands(struct aac_softc *sc);
static void aac_unmap_command(struct aac_command *cm);
/* Hardware Interface */
static void aac_common_map(void *arg, bus_dma_segment_t *segs, int nseg,
int error);
static int aac_check_firmware(struct aac_softc *sc);
static int aac_init(struct aac_softc *sc);
static int aac_sync_command(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1, u_int32_t arg2,
u_int32_t arg3, u_int32_t *sp);
static int aac_enqueue_fib(struct aac_softc *sc, int queue,
struct aac_command *cm);
static int aac_dequeue_fib(struct aac_softc *sc, int queue,
u_int32_t *fib_size, struct aac_fib **fib_addr);
static int aac_enqueue_response(struct aac_softc *sc, int queue,
struct aac_fib *fib);
/* Falcon/PPC interface */
static int aac_fa_get_fwstatus(struct aac_softc *sc);
static void aac_fa_qnotify(struct aac_softc *sc, int qbit);
static int aac_fa_get_istatus(struct aac_softc *sc);
static void aac_fa_clear_istatus(struct aac_softc *sc, int mask);
static void aac_fa_set_mailbox(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1,
u_int32_t arg2, u_int32_t arg3);
static int aac_fa_get_mailbox(struct aac_softc *sc, int mb);
static void aac_fa_set_interrupts(struct aac_softc *sc, int enable);
struct aac_interface aac_fa_interface = {
aac_fa_get_fwstatus,
aac_fa_qnotify,
aac_fa_get_istatus,
aac_fa_clear_istatus,
aac_fa_set_mailbox,
aac_fa_get_mailbox,
aac_fa_set_interrupts
};
/* StrongARM interface */
static int aac_sa_get_fwstatus(struct aac_softc *sc);
static void aac_sa_qnotify(struct aac_softc *sc, int qbit);
static int aac_sa_get_istatus(struct aac_softc *sc);
static void aac_sa_clear_istatus(struct aac_softc *sc, int mask);
static void aac_sa_set_mailbox(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1,
u_int32_t arg2, u_int32_t arg3);
static int aac_sa_get_mailbox(struct aac_softc *sc, int mb);
static void aac_sa_set_interrupts(struct aac_softc *sc, int enable);
struct aac_interface aac_sa_interface = {
aac_sa_get_fwstatus,
aac_sa_qnotify,
aac_sa_get_istatus,
aac_sa_clear_istatus,
aac_sa_set_mailbox,
aac_sa_get_mailbox,
aac_sa_set_interrupts
};
/* i960Rx interface */
static int aac_rx_get_fwstatus(struct aac_softc *sc);
static void aac_rx_qnotify(struct aac_softc *sc, int qbit);
static int aac_rx_get_istatus(struct aac_softc *sc);
static void aac_rx_clear_istatus(struct aac_softc *sc, int mask);
static void aac_rx_set_mailbox(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1,
u_int32_t arg2, u_int32_t arg3);
static int aac_rx_get_mailbox(struct aac_softc *sc, int mb);
static void aac_rx_set_interrupts(struct aac_softc *sc, int enable);
struct aac_interface aac_rx_interface = {
aac_rx_get_fwstatus,
aac_rx_qnotify,
aac_rx_get_istatus,
aac_rx_clear_istatus,
aac_rx_set_mailbox,
aac_rx_get_mailbox,
aac_rx_set_interrupts
};
/* Debugging and Diagnostics */
static void aac_describe_controller(struct aac_softc *sc);
static char *aac_describe_code(struct aac_code_lookup *table,
u_int32_t code);
/* Management Interface */
static d_open_t aac_open;
static d_close_t aac_close;
static d_ioctl_t aac_ioctl;
static d_poll_t aac_poll;
static int aac_ioctl_sendfib(struct aac_softc *sc, caddr_t ufib);
static void aac_handle_aif(struct aac_softc *sc,
struct aac_fib *fib);
static int aac_rev_check(struct aac_softc *sc, caddr_t udata);
static int aac_getnext_aif(struct aac_softc *sc, caddr_t arg);
static int aac_return_aif(struct aac_softc *sc, caddr_t uptr);
static int aac_query_disk(struct aac_softc *sc, caddr_t uptr);
static struct cdevsw aac_cdevsw = {
.d_open = aac_open,
.d_close = aac_close,
.d_ioctl = aac_ioctl,
.d_poll = aac_poll,
.d_name = "aac",
};
MALLOC_DEFINE(M_AACBUF, "aacbuf", "Buffers for the AAC driver");
/* sysctl node */
SYSCTL_NODE(_hw, OID_AUTO, aac, CTLFLAG_RD, 0, "AAC driver parameters");
/*
* Device Interface
*/
/*
* Initialise the controller and softc
*/
int
aac_attach(struct aac_softc *sc)
{
int error, unit;
debug_called(1);
/*
* Initialise per-controller queues.
*/
aac_initq_free(sc);
aac_initq_ready(sc);
aac_initq_busy(sc);
aac_initq_bio(sc);
/*
* Initialise command-completion task.
*/
TASK_INIT(&sc->aac_task_complete, 0, aac_complete, sc);
/* disable interrupts before we enable anything */
AAC_MASK_INTERRUPTS(sc);
/* mark controller as suspended until we get ourselves organised */
sc->aac_state |= AAC_STATE_SUSPEND;
/*
* Check that the firmware on the card is supported.
*/
if ((error = aac_check_firmware(sc)) != 0)
return(error);
/*
* Initialize locks
*/
AAC_LOCK_INIT(&sc->aac_sync_lock, "AAC sync FIB lock");
AAC_LOCK_INIT(&sc->aac_aifq_lock, "AAC AIF lock");
AAC_LOCK_INIT(&sc->aac_io_lock, "AAC I/O lock");
AAC_LOCK_INIT(&sc->aac_container_lock, "AAC container lock");
TAILQ_INIT(&sc->aac_container_tqh);
/* Initialize the local AIF queue pointers */
sc->aac_aifq_head = sc->aac_aifq_tail = AAC_AIFQ_LENGTH;
/*
* Initialise the adapter.
*/
if ((error = aac_init(sc)) != 0)
return(error);
/*
* Print a little information about the controller.
*/
aac_describe_controller(sc);
/*
* Register to probe our containers later.
*/
sc->aac_ich.ich_func = aac_startup;
sc->aac_ich.ich_arg = sc;
if (config_intrhook_establish(&sc->aac_ich) != 0) {
device_printf(sc->aac_dev,
"can't establish configuration hook\n");
return(ENXIO);
}
/*
* Make the control device.
*/
unit = device_get_unit(sc->aac_dev);
sc->aac_dev_t = make_dev(&aac_cdevsw, unit, UID_ROOT, GID_OPERATOR,
0640, "aac%d", unit);
(void)make_dev_alias(sc->aac_dev_t, "afa%d", unit);
(void)make_dev_alias(sc->aac_dev_t, "hpn%d", unit);
sc->aac_dev_t->si_drv1 = sc;
/* Create the AIF thread */
if (kthread_create((void(*)(void *))aac_command_thread, sc,
&sc->aifthread, 0, 0, "aac%daif", unit))
panic("Could not create AIF thread\n");
/* Register the shutdown method to only be called post-dump */
if ((sc->eh = EVENTHANDLER_REGISTER(shutdown_final, aac_shutdown,
sc->aac_dev, SHUTDOWN_PRI_DEFAULT)) == NULL)
device_printf(sc->aac_dev,
"shutdown event registration failed\n");
/* Register with CAM for the non-DASD devices */
if ((sc->flags & AAC_FLAGS_ENABLE_CAM) != 0) {
TAILQ_INIT(&sc->aac_sim_tqh);
aac_get_bus_info(sc);
}
return(0);
}
/*
* Probe for containers, create disks.
*/
static void
aac_startup(void *arg)
{
struct aac_softc *sc;
struct aac_fib *fib;
struct aac_mntinfo *mi;
struct aac_mntinforesp *mir = NULL;
int count = 0, i = 0;
debug_called(1);
sc = (struct aac_softc *)arg;
/* disconnect ourselves from the intrhook chain */
config_intrhook_disestablish(&sc->aac_ich);
aac_alloc_sync_fib(sc, &fib, 0);
mi = (struct aac_mntinfo *)&fib->data[0];
/* loop over possible containers */
do {
/* request information on this container */
bzero(mi, sizeof(struct aac_mntinfo));
mi->Command = VM_NameServe;
mi->MntType = FT_FILESYS;
mi->MntCount = i;
if (aac_sync_fib(sc, ContainerCommand, 0, fib,
sizeof(struct aac_mntinfo))) {
printf("error probing container %d", i);
continue;
}
mir = (struct aac_mntinforesp *)&fib->data[0];
/* XXX Need to check if count changed */
count = mir->MntRespCount;
aac_add_container(sc, mir, 0);
i++;
} while ((i < count) && (i < AAC_MAX_CONTAINERS));
aac_release_sync_fib(sc);
/* poke the bus to actually attach the child devices */
if (bus_generic_attach(sc->aac_dev))
device_printf(sc->aac_dev, "bus_generic_attach failed\n");
/* mark the controller up */
sc->aac_state &= ~AAC_STATE_SUSPEND;
/* enable interrupts now */
AAC_UNMASK_INTERRUPTS(sc);
}
/*
* Create a device to respresent a new container
*/
static void
aac_add_container(struct aac_softc *sc, struct aac_mntinforesp *mir, int f)
{
struct aac_container *co;
device_t child;
/*
* Check container volume type for validity. Note that many of
* the possible types may never show up.
*/
if ((mir->Status == ST_OK) && (mir->MntTable[0].VolType != CT_NONE)) {
co = (struct aac_container *)malloc(sizeof *co, M_AACBUF,
M_NOWAIT | M_ZERO);
if (co == NULL)
panic("Out of memory?!\n");
debug(1, "id %x name '%.16s' size %u type %d",
mir->MntTable[0].ObjectId,
mir->MntTable[0].FileSystemName,
mir->MntTable[0].Capacity, mir->MntTable[0].VolType);
if ((child = device_add_child(sc->aac_dev, "aacd", -1)) == NULL)
device_printf(sc->aac_dev, "device_add_child failed\n");
else
device_set_ivars(child, co);
device_set_desc(child, aac_describe_code(aac_container_types,
mir->MntTable[0].VolType));
co->co_disk = child;
co->co_found = f;
bcopy(&mir->MntTable[0], &co->co_mntobj,
sizeof(struct aac_mntobj));
AAC_LOCK_ACQUIRE(&sc->aac_container_lock);
TAILQ_INSERT_TAIL(&sc->aac_container_tqh, co, co_link);
AAC_LOCK_RELEASE(&sc->aac_container_lock);
}
}
/*
* Free all of the resources associated with (sc)
*
* Should not be called if the controller is active.
*/
void
aac_free(struct aac_softc *sc)
{
debug_called(1);
/* remove the control device */
if (sc->aac_dev_t != NULL)
destroy_dev(sc->aac_dev_t);
/* throw away any FIB buffers, discard the FIB DMA tag */
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
aac_free_commands(sc);
if (sc->aac_fib_dmat)
bus_dma_tag_destroy(sc->aac_fib_dmat);
free(sc->aac_commands, M_AACBUF);
/* destroy the common area */
if (sc->aac_common) {
bus_dmamap_unload(sc->aac_common_dmat, sc->aac_common_dmamap);
bus_dmamem_free(sc->aac_common_dmat, sc->aac_common,
sc->aac_common_dmamap);
}
if (sc->aac_common_dmat)
bus_dma_tag_destroy(sc->aac_common_dmat);
/* disconnect the interrupt handler */
if (sc->aac_intr)
bus_teardown_intr(sc->aac_dev, sc->aac_irq, sc->aac_intr);
if (sc->aac_irq != NULL)
bus_release_resource(sc->aac_dev, SYS_RES_IRQ, sc->aac_irq_rid,
sc->aac_irq);
/* destroy data-transfer DMA tag */
if (sc->aac_buffer_dmat)
bus_dma_tag_destroy(sc->aac_buffer_dmat);
/* destroy the parent DMA tag */
if (sc->aac_parent_dmat)
bus_dma_tag_destroy(sc->aac_parent_dmat);
/* release the register window mapping */
if (sc->aac_regs_resource != NULL)
bus_release_resource(sc->aac_dev, SYS_RES_MEMORY,
sc->aac_regs_rid, sc->aac_regs_resource);
}
/*
* Disconnect from the controller completely, in preparation for unload.
*/
int
aac_detach(device_t dev)
{
struct aac_softc *sc;
struct aac_container *co;
struct aac_sim *sim;
int error;
debug_called(1);
sc = device_get_softc(dev);
if (sc->aac_state & AAC_STATE_OPEN)
return(EBUSY);
/* Remove the child containers */
while ((co = TAILQ_FIRST(&sc->aac_container_tqh)) != NULL) {
error = device_delete_child(dev, co->co_disk);
if (error)
return (error);
TAILQ_REMOVE(&sc->aac_container_tqh, co, co_link);
free(co, M_AACBUF);
}
/* Remove the CAM SIMs */
while ((sim = TAILQ_FIRST(&sc->aac_sim_tqh)) != NULL) {
TAILQ_REMOVE(&sc->aac_sim_tqh, sim, sim_link);
error = device_delete_child(dev, sim->sim_dev);
if (error)
return (error);
free(sim, M_AACBUF);
}
if (sc->aifflags & AAC_AIFFLAGS_RUNNING) {
sc->aifflags |= AAC_AIFFLAGS_EXIT;
wakeup(sc->aifthread);
tsleep(sc->aac_dev, PUSER | PCATCH, "aacdch", 30 * hz);
}
if (sc->aifflags & AAC_AIFFLAGS_RUNNING)
panic("Cannot shutdown AIF thread\n");
if ((error = aac_shutdown(dev)))
return(error);
EVENTHANDLER_DEREGISTER(shutdown_final, sc->eh);
aac_free(sc);
return(0);
}
/*
* Bring the controller down to a dormant state and detach all child devices.
*
* This function is called before detach or system shutdown.
*
* Note that we can assume that the bioq on the controller is empty, as we won't
* allow shutdown if any device is open.
*/
int
aac_shutdown(device_t dev)
{
struct aac_softc *sc;
struct aac_fib *fib;
struct aac_close_command *cc;
debug_called(1);
sc = device_get_softc(dev);
sc->aac_state |= AAC_STATE_SUSPEND;
/*
* Send a Container shutdown followed by a HostShutdown FIB to the
* controller to convince it that we don't want to talk to it anymore.
* We've been closed and all I/O completed already
*/
device_printf(sc->aac_dev, "shutting down controller...");
aac_alloc_sync_fib(sc, &fib, AAC_SYNC_LOCK_FORCE);
cc = (struct aac_close_command *)&fib->data[0];
bzero(cc, sizeof(struct aac_close_command));
cc->Command = VM_CloseAll;
cc->ContainerId = 0xffffffff;
if (aac_sync_fib(sc, ContainerCommand, 0, fib,
sizeof(struct aac_close_command)))
printf("FAILED.\n");
else
printf("done\n");
#if 0
else {
fib->data[0] = 0;
/*
* XXX Issuing this command to the controller makes it shut down
* but also keeps it from coming back up without a reset of the
* PCI bus. This is not desirable if you are just unloading the
* driver module with the intent to reload it later.
*/
if (aac_sync_fib(sc, FsaHostShutdown, AAC_FIBSTATE_SHUTDOWN,
fib, 1)) {
printf("FAILED.\n");
} else {
printf("done.\n");
}
}
#endif
AAC_MASK_INTERRUPTS(sc);
return(0);
}
/*
* Bring the controller to a quiescent state, ready for system suspend.
*/
int
aac_suspend(device_t dev)
{
struct aac_softc *sc;
debug_called(1);
sc = device_get_softc(dev);
sc->aac_state |= AAC_STATE_SUSPEND;
AAC_MASK_INTERRUPTS(sc);
return(0);
}
/*
* Bring the controller back to a state ready for operation.
*/
int
aac_resume(device_t dev)
{
struct aac_softc *sc;
debug_called(1);
sc = device_get_softc(dev);
sc->aac_state &= ~AAC_STATE_SUSPEND;
AAC_UNMASK_INTERRUPTS(sc);
return(0);
}
/*
* Take an interrupt.
*/
void
aac_intr(void *arg)
{
struct aac_softc *sc;
u_int32_t *resp_queue;
u_int16_t reason;
debug_called(2);
sc = (struct aac_softc *)arg;
/*
* Optimize the common case of adapter response interrupts.
* We must read from the card prior to processing the responses
* to ensure the clear is flushed prior to accessing the queues.
* Reading the queues from local memory might save us a PCI read.
*/
resp_queue = sc->aac_queues->qt_qindex[AAC_HOST_NORM_RESP_QUEUE];
if (resp_queue[AAC_PRODUCER_INDEX] != resp_queue[AAC_CONSUMER_INDEX])
reason = AAC_DB_RESPONSE_READY;
else
reason = AAC_GET_ISTATUS(sc);
AAC_CLEAR_ISTATUS(sc, reason);
(void)AAC_GET_ISTATUS(sc);
/* It's not ok to return here because of races with the previous step */
if (reason & AAC_DB_RESPONSE_READY)
/* handle completion processing */
taskqueue_enqueue(taskqueue_swi, &sc->aac_task_complete);
/* controller wants to talk to the log */
if (reason & AAC_DB_PRINTF) {
if (sc->aifflags & AAC_AIFFLAGS_RUNNING) {
sc->aifflags |= AAC_AIFFLAGS_PRINTF;
} else
aac_print_printf(sc);
}
/* controller has a message for us? */
if (reason & AAC_DB_COMMAND_READY) {
if (sc->aifflags & AAC_AIFFLAGS_RUNNING) {
sc->aifflags |= AAC_AIFFLAGS_AIF;
} else {
/*
* XXX If the kthread is dead and we're at this point,
* there are bigger problems than just figuring out
* what to do with an AIF.
*/
}
}
if ((sc->aifflags & AAC_AIFFLAGS_PENDING) != 0)
/* XXX Should this be done with cv_signal? */
wakeup(sc->aifthread);
}
/*
* Command Processing
*/
/*
* Start as much queued I/O as possible on the controller
*/
void
aac_startio(struct aac_softc *sc)
{
struct aac_command *cm;
debug_called(2);
if (sc->flags & AAC_QUEUE_FRZN)
return;
for (;;) {
/*
* Try to get a command that's been put off for lack of
* resources
*/
cm = aac_dequeue_ready(sc);
/*
* Try to build a command off the bio queue (ignore error
* return)
*/
if (cm == NULL)
aac_bio_command(sc, &cm);
/* nothing to do? */
if (cm == NULL)
break;
/* try to give the command to the controller */
if (aac_map_command(cm) == EBUSY) {
/* put it on the ready queue for later */
aac_requeue_ready(cm);
break;
}
}
}
/*
* Deliver a command to the controller; allocate controller resources at the
* last moment when possible.
*/
static int
aac_map_command(struct aac_command *cm)
{
struct aac_softc *sc;
int error;
debug_called(2);
sc = cm->cm_sc;
error = 0;
/* don't map more than once */
if (cm->cm_flags & AAC_CMD_MAPPED)
return (0);
if (cm->cm_datalen != 0) {
error = bus_dmamap_load(sc->aac_buffer_dmat, cm->cm_datamap,
cm->cm_data, cm->cm_datalen,
aac_map_command_sg, cm, 0);
if (error == EINPROGRESS) {
debug(1, "freezing queue\n");
sc->flags |= AAC_QUEUE_FRZN;
error = 0;
}
} else {
aac_map_command_sg(cm, NULL, 0, 0);
}
return (error);
}
/*
* Handle notification of one or more FIBs coming from the controller.
*/
static void
aac_command_thread(struct aac_softc *sc)
{
struct aac_fib *fib;
u_int32_t fib_size;
int size;
debug_called(2);
sc->aifflags |= AAC_AIFFLAGS_RUNNING;
while (!(sc->aifflags & AAC_AIFFLAGS_EXIT)) {
if ((sc->aifflags & AAC_AIFFLAGS_PENDING) == 0)
tsleep(sc->aifthread, PRIBIO, "aifthd",
AAC_PERIODIC_INTERVAL * hz);
if ((sc->aifflags & AAC_AIFFLAGS_PENDING) == 0)
aac_timeout(sc);
/* Check the hardware printf message buffer */
if ((sc->aifflags & AAC_AIFFLAGS_PRINTF) != 0) {
sc->aifflags &= ~AAC_AIFFLAGS_PRINTF;
aac_print_printf(sc);
}
/* See if any FIBs need to be allocated */
if ((sc->aifflags & AAC_AIFFLAGS_ALLOCFIBS) != 0) {
AAC_LOCK_ACQUIRE(&sc->aac_io_lock);
aac_alloc_commands(sc);
sc->aifflags &= ~AAC_AIFFLAGS_ALLOCFIBS;
AAC_LOCK_RELEASE(&sc->aac_io_lock);
}
/* While we're here, check to see if any commands are stuck */
while (sc->aifflags & AAC_AIFFLAGS_AIF) {
if (aac_dequeue_fib(sc, AAC_HOST_NORM_CMD_QUEUE,
&fib_size, &fib)) {
sc->aifflags &= ~AAC_AIFFLAGS_AIF;
break; /* nothing to do */
}
AAC_PRINT_FIB(sc, fib);
switch (fib->Header.Command) {
case AifRequest:
aac_handle_aif(sc, fib);
break;
default:
device_printf(sc->aac_dev, "unknown command "
"from controller\n");
break;
}
if ((fib->Header.XferState == 0) ||
(fib->Header.StructType != AAC_FIBTYPE_TFIB))
break;
/* Return the AIF to the controller. */
if (fib->Header.XferState & AAC_FIBSTATE_FROMADAP) {
fib->Header.XferState |= AAC_FIBSTATE_DONEHOST;
*(AAC_FSAStatus*)fib->data = ST_OK;
/* XXX Compute the Size field? */
size = fib->Header.Size;
if (size > sizeof(struct aac_fib)) {
size = sizeof(struct aac_fib);
fib->Header.Size = size;
}
/*
* Since we did not generate this command, it
* cannot go through the normal
* enqueue->startio chain.
*/
aac_enqueue_response(sc,
AAC_ADAP_NORM_RESP_QUEUE,
fib);
}
}
}
sc->aifflags &= ~AAC_AIFFLAGS_RUNNING;
wakeup(sc->aac_dev);
mtx_lock(&Giant);
kthread_exit(0);
}
/*
* Process completed commands.
*/
static void
aac_complete(void *context, int pending)
{
struct aac_softc *sc;
struct aac_command *cm;
struct aac_fib *fib;
u_int32_t fib_size;
debug_called(2);
sc = (struct aac_softc *)context;
AAC_LOCK_ACQUIRE(&sc->aac_io_lock);
/* pull completed commands off the queue */
for (;;) {
/* look for completed FIBs on our queue */
if (aac_dequeue_fib(sc, AAC_HOST_NORM_RESP_QUEUE, &fib_size,
&fib))
break; /* nothing to do */
/* get the command, unmap and queue for later processing */
cm = sc->aac_commands + fib->Header.SenderData;
if (cm == NULL) {
AAC_PRINT_FIB(sc, fib);
break;
}
aac_remove_busy(cm);
aac_unmap_command(cm); /* XXX defer? */
cm->cm_flags |= AAC_CMD_COMPLETED;
/* is there a completion handler? */
if (cm->cm_complete != NULL) {
cm->cm_complete(cm);
} else {
/* assume that someone is sleeping on this command */
wakeup(cm);
}
}
/* see if we can start some more I/O */
sc->flags &= ~AAC_QUEUE_FRZN;
aac_startio(sc);
AAC_LOCK_RELEASE(&sc->aac_io_lock);
}
/*
* Handle a bio submitted from a disk device.
*/
void
aac_submit_bio(struct bio *bp)
{
struct aac_disk *ad;
struct aac_softc *sc;
debug_called(2);
ad = (struct aac_disk *)bp->bio_disk->d_drv1;
sc = ad->ad_controller;
/* queue the BIO and try to get some work done */
aac_enqueue_bio(sc, bp);
aac_startio(sc);
}
/*
* Get a bio and build a command to go with it.
*/
static int
aac_bio_command(struct aac_softc *sc, struct aac_command **cmp)
{
struct aac_command *cm;
struct aac_fib *fib;
struct aac_disk *ad;
struct bio *bp;
debug_called(2);
/* get the resources we will need */
cm = NULL;
if ((bp = aac_dequeue_bio(sc)) == NULL)
goto fail;
if (aac_alloc_command(sc, &cm)) /* get a command */
goto fail;
/* fill out the command */
cm->cm_data = (void *)bp->bio_data;
cm->cm_datalen = bp->bio_bcount;
cm->cm_complete = aac_bio_complete;
cm->cm_private = bp;
cm->cm_timestamp = time_second;
cm->cm_queue = AAC_ADAP_NORM_CMD_QUEUE;
/* build the FIB */
fib = cm->cm_fib;
fib->Header.Size = sizeof(struct aac_fib_header);
fib->Header.XferState =
AAC_FIBSTATE_HOSTOWNED |
AAC_FIBSTATE_INITIALISED |
AAC_FIBSTATE_EMPTY |
AAC_FIBSTATE_FROMHOST |
AAC_FIBSTATE_REXPECTED |
AAC_FIBSTATE_NORM |
AAC_FIBSTATE_ASYNC |
AAC_FIBSTATE_FAST_RESPONSE;
/* build the read/write request */
ad = (struct aac_disk *)bp->bio_disk->d_drv1;
if ((sc->flags & AAC_FLAGS_SG_64BIT) == 0) {
fib->Header.Command = ContainerCommand;
if (bp->bio_cmd == BIO_READ) {
struct aac_blockread *br;
br = (struct aac_blockread *)&fib->data[0];
br->Command = VM_CtBlockRead;
br->ContainerId = ad->ad_container->co_mntobj.ObjectId;
br->BlockNumber = bp->bio_pblkno;
br->ByteCount = bp->bio_bcount;
fib->Header.Size += sizeof(struct aac_blockread);
cm->cm_sgtable = &br->SgMap;
cm->cm_flags |= AAC_CMD_DATAIN;
} else {
struct aac_blockwrite *bw;
bw = (struct aac_blockwrite *)&fib->data[0];
bw->Command = VM_CtBlockWrite;
bw->ContainerId = ad->ad_container->co_mntobj.ObjectId;
bw->BlockNumber = bp->bio_pblkno;
bw->ByteCount = bp->bio_bcount;
bw->Stable = CUNSTABLE;
fib->Header.Size += sizeof(struct aac_blockwrite);
cm->cm_flags |= AAC_CMD_DATAOUT;
cm->cm_sgtable = &bw->SgMap;
}
} else {
fib->Header.Command = ContainerCommand64;
if (bp->bio_cmd == BIO_READ) {
struct aac_blockread64 *br;
br = (struct aac_blockread64 *)&fib->data[0];
br->Command = VM_CtHostRead64;
br->ContainerId = ad->ad_container->co_mntobj.ObjectId;
br->SectorCount = bp->bio_bcount / AAC_BLOCK_SIZE;
br->BlockNumber = bp->bio_pblkno;
br->Pad = 0;
br->Flags = 0;
fib->Header.Size += sizeof(struct aac_blockread64);
cm->cm_flags |= AAC_CMD_DATAOUT;
(struct aac_sg_table64 *)cm->cm_sgtable = &br->SgMap64;
} else {
struct aac_blockwrite64 *bw;
bw = (struct aac_blockwrite64 *)&fib->data[0];
bw->Command = VM_CtHostWrite64;
bw->ContainerId = ad->ad_container->co_mntobj.ObjectId;
bw->SectorCount = bp->bio_bcount / AAC_BLOCK_SIZE;
bw->BlockNumber = bp->bio_pblkno;
bw->Pad = 0;
bw->Flags = 0;
fib->Header.Size += sizeof(struct aac_blockwrite64);
cm->cm_flags |= AAC_CMD_DATAIN;
(struct aac_sg_table64 *)cm->cm_sgtable = &bw->SgMap64;
}
}
*cmp = cm;
return(0);
fail:
if (bp != NULL)
aac_enqueue_bio(sc, bp);
if (cm != NULL)
aac_release_command(cm);
return(ENOMEM);
}
/*
* Handle a bio-instigated command that has been completed.
*/
static void
aac_bio_complete(struct aac_command *cm)
{
struct aac_blockread_response *brr;
struct aac_blockwrite_response *bwr;
struct bio *bp;
AAC_FSAStatus status;
/* fetch relevant status and then release the command */
bp = (struct bio *)cm->cm_private;
if (bp->bio_cmd == BIO_READ) {
brr = (struct aac_blockread_response *)&cm->cm_fib->data[0];
status = brr->Status;
} else {
bwr = (struct aac_blockwrite_response *)&cm->cm_fib->data[0];
status = bwr->Status;
}
aac_release_command(cm);
/* fix up the bio based on status */
if (status == ST_OK) {
bp->bio_resid = 0;
} else {
bp->bio_error = EIO;
bp->bio_flags |= BIO_ERROR;
/* pass an error string out to the disk layer */
bp->bio_driver1 = aac_describe_code(aac_command_status_table,
status);
}
aac_biodone(bp);
}
/*
* Submit a command to the controller, return when it completes.
* XXX This is very dangerous! If the card has gone out to lunch, we could
* be stuck here forever. At the same time, signals are not caught
* because there is a risk that a signal could wakeup the tsleep before
* the card has a chance to complete the command. The passed in timeout
* is ignored for the same reason. Since there is no way to cancel a
* command in progress, we should probably create a 'dead' queue where
* commands go that have been interrupted/timed-out/etc, that keeps them
* out of the free pool. That way, if the card is just slow, it won't
* spam the memory of a command that has been recycled.
*/
static int
aac_wait_command(struct aac_command *cm, int timeout)
{
struct aac_softc *sc;
int error = 0;
debug_called(2);
sc = cm->cm_sc;
/* Put the command on the ready queue and get things going */
cm->cm_queue = AAC_ADAP_NORM_CMD_QUEUE;
aac_enqueue_ready(cm);
aac_startio(sc);
while (!(cm->cm_flags & AAC_CMD_COMPLETED) && (error != EWOULDBLOCK)) {
error = msleep(cm, &sc->aac_io_lock, PRIBIO, "aacwait", 0);
}
return(error);
}
/*
*Command Buffer Management
*/
/*
* Allocate a command.
*/
int
aac_alloc_command(struct aac_softc *sc, struct aac_command **cmp)
{
struct aac_command *cm;
debug_called(3);
if ((cm = aac_dequeue_free(sc)) == NULL) {
if (sc->total_fibs < sc->aac_max_fibs) {
sc->aifflags |= AAC_AIFFLAGS_ALLOCFIBS;
wakeup(sc->aifthread);
}
return (EBUSY);
}
*cmp = cm;
return(0);
}
/*
* Release a command back to the freelist.
*/
void
aac_release_command(struct aac_command *cm)
{
debug_called(3);
/* (re)initialise the command/FIB */
cm->cm_sgtable = NULL;
cm->cm_flags = 0;
cm->cm_complete = NULL;
cm->cm_private = NULL;
cm->cm_fib->Header.XferState = AAC_FIBSTATE_EMPTY;
cm->cm_fib->Header.StructType = AAC_FIBTYPE_TFIB;
cm->cm_fib->Header.Flags = 0;
cm->cm_fib->Header.SenderSize = sizeof(struct aac_fib);
/*
* These are duplicated in aac_start to cover the case where an
* intermediate stage may have destroyed them. They're left
* initialised here for debugging purposes only.
*/
cm->cm_fib->Header.ReceiverFibAddress = (u_int32_t)cm->cm_fibphys;
cm->cm_fib->Header.SenderData = 0;
aac_enqueue_free(cm);
}
/*
* Map helper for command/FIB allocation.
*/
static void
aac_map_command_helper(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
uint32_t *fibphys;
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
fibphys = (uint32_t *)arg;
debug_called(3);
*fibphys = segs[0].ds_addr;
}
/*
* Allocate and initialise commands/FIBs for this adapter.
*/
static int
aac_alloc_commands(struct aac_softc *sc)
{
struct aac_command *cm;
struct aac_fibmap *fm;
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
uint32_t fibphys;
int i, error;
debug_called(2);
if (sc->total_fibs + AAC_FIB_COUNT > sc->aac_max_fibs)
return (ENOMEM);
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
fm = malloc(sizeof(struct aac_fibmap), M_AACBUF, M_NOWAIT|M_ZERO);
if (fm == NULL)
return (ENOMEM);
/* allocate the FIBs in DMAable memory and load them */
if (bus_dmamem_alloc(sc->aac_fib_dmat, (void **)&fm->aac_fibs,
BUS_DMA_NOWAIT, &fm->aac_fibmap)) {
device_printf(sc->aac_dev,
"Not enough contiguous memory available.\n");
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
free(fm, M_AACBUF);
return (ENOMEM);
}
/* Ignore errors since this doesn't bounce */
(void)bus_dmamap_load(sc->aac_fib_dmat, fm->aac_fibmap, fm->aac_fibs,
AAC_FIB_COUNT * sizeof(struct aac_fib),
aac_map_command_helper, &fibphys, 0);
/* initialise constant fields in the command structure */
bzero(fm->aac_fibs, AAC_FIB_COUNT * sizeof(struct aac_fib));
for (i = 0; i < AAC_FIB_COUNT; i++) {
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
cm = sc->aac_commands + sc->total_fibs;
fm->aac_commands = cm;
cm->cm_sc = sc;
cm->cm_fib = fm->aac_fibs + i;
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
cm->cm_fibphys = fibphys + (i * sizeof(struct aac_fib));
cm->cm_index = sc->total_fibs;
if ((error = bus_dmamap_create(sc->aac_buffer_dmat, 0,
&cm->cm_datamap)) == 0)
aac_release_command(cm);
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
else
break;
sc->total_fibs++;
}
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
if (i > 0) {
TAILQ_INSERT_TAIL(&sc->aac_fibmap_tqh, fm, fm_link);
debug(1, "total_fibs= %d\n", sc->total_fibs);
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
return (0);
}
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
bus_dmamap_unload(sc->aac_fib_dmat, fm->aac_fibmap);
bus_dmamem_free(sc->aac_fib_dmat, fm->aac_fibs, fm->aac_fibmap);
free(fm, M_AACBUF);
return (ENOMEM);
}
/*
* Free FIBs owned by this adapter.
*/
static void
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
aac_free_commands(struct aac_softc *sc)
{
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
struct aac_fibmap *fm;
struct aac_command *cm;
int i;
debug_called(1);
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
while ((fm = TAILQ_FIRST(&sc->aac_fibmap_tqh)) != NULL) {
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
TAILQ_REMOVE(&sc->aac_fibmap_tqh, fm, fm_link);
/*
* We check against total_fibs to handle partially
* allocated blocks.
*/
for (i = 0; i < AAC_FIB_COUNT && sc->total_fibs--; i++) {
cm = fm->aac_commands + i;
bus_dmamap_destroy(sc->aac_buffer_dmat, cm->cm_datamap);
}
bus_dmamap_unload(sc->aac_fib_dmat, fm->aac_fibmap);
bus_dmamem_free(sc->aac_fib_dmat, fm->aac_fibs, fm->aac_fibmap);
free(fm, M_AACBUF);
}
}
/*
* Command-mapping helper function - populate this command's s/g table.
*/
static void
aac_map_command_sg(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct aac_softc *sc;
struct aac_command *cm;
struct aac_fib *fib;
int i;
debug_called(3);
cm = (struct aac_command *)arg;
sc = cm->cm_sc;
fib = cm->cm_fib;
/* copy into the FIB */
if (cm->cm_sgtable != NULL) {
if ((cm->cm_sc->flags & AAC_FLAGS_SG_64BIT) == 0) {
struct aac_sg_table *sg;
sg = cm->cm_sgtable;
sg->SgCount = nseg;
for (i = 0; i < nseg; i++) {
sg->SgEntry[i].SgAddress = segs[i].ds_addr;
sg->SgEntry[i].SgByteCount = segs[i].ds_len;
}
/* update the FIB size for the s/g count */
fib->Header.Size += nseg * sizeof(struct aac_sg_entry);
} else {
struct aac_sg_table64 *sg;
sg = (struct aac_sg_table64 *)cm->cm_sgtable;
sg->SgCount = nseg;
for (i = 0; i < nseg; i++) {
sg->SgEntry64[i].SgAddress = segs[i].ds_addr;
sg->SgEntry64[i].SgByteCount = segs[i].ds_len;
}
/* update the FIB size for the s/g count */
fib->Header.Size += nseg*sizeof(struct aac_sg_entry64);
}
}
/* Fix up the address values in the FIB. Use the command array index
* instead of a pointer since these fields are only 32 bits. Shift
* the SenderFibAddress over to make room for the fast response bit.
*/
cm->cm_fib->Header.SenderFibAddress = (cm->cm_index << 1);
cm->cm_fib->Header.ReceiverFibAddress = cm->cm_fibphys;
/* save a pointer to the command for speedy reverse-lookup */
cm->cm_fib->Header.SenderData = cm->cm_index;
if (cm->cm_flags & AAC_CMD_DATAIN)
bus_dmamap_sync(sc->aac_buffer_dmat, cm->cm_datamap,
BUS_DMASYNC_PREREAD);
if (cm->cm_flags & AAC_CMD_DATAOUT)
bus_dmamap_sync(sc->aac_buffer_dmat, cm->cm_datamap,
BUS_DMASYNC_PREWRITE);
cm->cm_flags |= AAC_CMD_MAPPED;
/* put the FIB on the outbound queue */
if (aac_enqueue_fib(sc, cm->cm_queue, cm) == EBUSY)
aac_requeue_ready(cm);
return;
}
/*
* Unmap a command from controller-visible space.
*/
static void
aac_unmap_command(struct aac_command *cm)
{
struct aac_softc *sc;
debug_called(2);
sc = cm->cm_sc;
if (!(cm->cm_flags & AAC_CMD_MAPPED))
return;
if (cm->cm_datalen != 0) {
if (cm->cm_flags & AAC_CMD_DATAIN)
bus_dmamap_sync(sc->aac_buffer_dmat, cm->cm_datamap,
BUS_DMASYNC_POSTREAD);
if (cm->cm_flags & AAC_CMD_DATAOUT)
bus_dmamap_sync(sc->aac_buffer_dmat, cm->cm_datamap,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->aac_buffer_dmat, cm->cm_datamap);
}
cm->cm_flags &= ~AAC_CMD_MAPPED;
}
/*
* Hardware Interface
*/
/*
* Initialise the adapter.
*/
static void
aac_common_map(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct aac_softc *sc;
debug_called(1);
sc = (struct aac_softc *)arg;
sc->aac_common_busaddr = segs[0].ds_addr;
}
static int
aac_check_firmware(struct aac_softc *sc)
{
u_int32_t major, minor, options;
debug_called(1);
/*
* Retrieve the firmware version numbers. Dell PERC2/QC cards with
* firmware version 1.x are not compatible with this driver.
*/
if (sc->flags & AAC_FLAGS_PERC2QC) {
if (aac_sync_command(sc, AAC_MONKER_GETKERNVER, 0, 0, 0, 0,
NULL)) {
device_printf(sc->aac_dev,
"Error reading firmware version\n");
return (EIO);
}
/* These numbers are stored as ASCII! */
major = (AAC_GET_MAILBOX(sc, 1) & 0xff) - 0x30;
minor = (AAC_GET_MAILBOX(sc, 2) & 0xff) - 0x30;
if (major == 1) {
device_printf(sc->aac_dev,
"Firmware version %d.%d is not supported.\n",
major, minor);
return (EINVAL);
}
}
/*
* Retrieve the capabilities/supported options word so we know what
* work-arounds to enable.
*/
if (aac_sync_command(sc, AAC_MONKER_GETINFO, 0, 0, 0, 0, NULL)) {
device_printf(sc->aac_dev, "RequestAdapterInfo failed\n");
return (EIO);
}
options = AAC_GET_MAILBOX(sc, 1);
sc->supported_options = options;
if ((options & AAC_SUPPORTED_4GB_WINDOW) != 0 &&
(sc->flags & AAC_FLAGS_NO4GB) == 0)
sc->flags |= AAC_FLAGS_4GB_WINDOW;
if (options & AAC_SUPPORTED_NONDASD)
sc->flags |= AAC_FLAGS_ENABLE_CAM;
if ((options & AAC_SUPPORTED_SGMAP_HOST64) != 0
&& (sizeof(bus_addr_t) > 4)) {
device_printf(sc->aac_dev, "Enabling 64-bit address support\n");
sc->flags |= AAC_FLAGS_SG_64BIT;
}
/* Check for broken hardware that does a lower number of commands */
if ((sc->flags & AAC_FLAGS_256FIBS) == 0)
sc->aac_max_fibs = AAC_MAX_FIBS;
else
sc->aac_max_fibs = 256;
return (0);
}
static int
aac_init(struct aac_softc *sc)
{
struct aac_adapter_init *ip;
time_t then;
u_int32_t code, qoffset;
int error;
debug_called(1);
/*
* First wait for the adapter to come ready.
*/
then = time_second;
do {
code = AAC_GET_FWSTATUS(sc);
if (code & AAC_SELF_TEST_FAILED) {
device_printf(sc->aac_dev, "FATAL: selftest failed\n");
return(ENXIO);
}
if (code & AAC_KERNEL_PANIC) {
device_printf(sc->aac_dev,
"FATAL: controller kernel panic\n");
return(ENXIO);
}
if (time_second > (then + AAC_BOOT_TIMEOUT)) {
device_printf(sc->aac_dev,
"FATAL: controller not coming ready, "
"status %x\n", code);
return(ENXIO);
}
} while (!(code & AAC_UP_AND_RUNNING));
error = ENOMEM;
/*
* Create DMA tag for mapping buffers into controller-addressable space.
*/
if (bus_dma_tag_create(sc->aac_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
(sc->flags & AAC_FLAGS_SG_64BIT) ?
BUS_SPACE_MAXADDR :
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, /* maxsize */
AAC_MAXSGENTRIES, /* nsegments */
MAXBSIZE, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
busdma_lock_mutex, /* lockfunc */
&sc->aac_io_lock, /* lockfuncarg */
&sc->aac_buffer_dmat)) {
device_printf(sc->aac_dev, "can't allocate buffer DMA tag\n");
goto out;
}
/*
* Create DMA tag for mapping FIBs into controller-addressable space..
*/
if (bus_dma_tag_create(sc->aac_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
(sc->flags & AAC_FLAGS_4GB_WINDOW) ?
BUS_SPACE_MAXADDR_32BIT :
0x7fffffff, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
AAC_FIB_COUNT *
sizeof(struct aac_fib), /* maxsize */
1, /* nsegments */
AAC_FIB_COUNT *
sizeof(struct aac_fib), /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
NULL, NULL, /* No locking needed */
&sc->aac_fib_dmat)) {
device_printf(sc->aac_dev, "can't allocate FIB DMA tag\n");;
goto out;
}
/*
* Create DMA tag for the common structure and allocate it.
*/
if (bus_dma_tag_create(sc->aac_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
(sc->flags & AAC_FLAGS_4GB_WINDOW) ?
BUS_SPACE_MAXADDR_32BIT :
0x7fffffff, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
8192 + sizeof(struct aac_common), /* maxsize */
1, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
NULL, NULL, /* No locking needed */
&sc->aac_common_dmat)) {
device_printf(sc->aac_dev,
"can't allocate common structure DMA tag\n");
goto out;
}
if (bus_dmamem_alloc(sc->aac_common_dmat, (void **)&sc->aac_common,
BUS_DMA_NOWAIT, &sc->aac_common_dmamap)) {
device_printf(sc->aac_dev, "can't allocate common structure\n");
goto out;
}
/*
* Work around a bug in the 2120 and 2200 that cannot DMA commands
* below address 8192 in physical memory.
* XXX If the padding is not needed, can it be put to use instead
* of ignored?
*/
(void)bus_dmamap_load(sc->aac_common_dmat, sc->aac_common_dmamap,
sc->aac_common, 8192 + sizeof(*sc->aac_common),
aac_common_map, sc, 0);
if (sc->aac_common_busaddr < 8192) {
(uint8_t *)sc->aac_common += 8192;
sc->aac_common_busaddr += 8192;
}
bzero(sc->aac_common, sizeof(*sc->aac_common));
/* Allocate some FIBs and associated command structs */
TAILQ_INIT(&sc->aac_fibmap_tqh);
sc->aac_commands = malloc(AAC_MAX_FIBS * sizeof(struct aac_command),
o Move the cleanup of the fib maps into aac_free_commands() so as to retain symetry with aac_alloc_commans(). Since aac_alloc_commands() allocates fib maps and places them onto the fib lists, aac_free_commands() should reverse those operations. o Combine two ifs with the same body with an ||. o Switch from uintptr_t to uint32_t for fib map load operations. The target is a uint32_t so using this type for the map load call avoids an extra cast. uintptr_t should only be used when you need an "int sized the same as the machine's poitner size" which is not the case here. o Removed the commented out M_WAITOK flag in the allocation in aac_alloc_commands(). The kernel will only block in the allocator if it can grow the size of the kernel. This usually results in a page-out which could involve this aac device. Thus, sleeping here could deadlock the machine. Assuming this operation is occurring outside of attach time, we have enough fibs to operate anyway, so waiting for fibs to free up is okay if not optimal. o In aac_alloc_commands(), if we cannot dmamem_alloc additional fib space, free the fib map. o In aac_alloc_commands(), if we cannot create per-command dmamaps, don't lose track of the fib map that is mapping all of the commands that we have already released into the free pool. Instead, just cut out of the loop and modify aac_free_commands to not attempt to free maps that have not been allocated. o Don't use a magic number when pre-allocating fibs. o Use PAGE_SIZE to allocate in page sized chunks instead of an architecture specific constant. Submitted by: gibbs
2003-02-19 21:38:29 +00:00
M_AACBUF, M_WAITOK|M_ZERO);
while (sc->total_fibs < AAC_PREALLOCATE_FIBS) {
if (aac_alloc_commands(sc) != 0)
break;
}
if (sc->total_fibs == 0)
goto out;
/*
* Fill in the init structure. This tells the adapter about the
* physical location of various important shared data structures.
*/
ip = &sc->aac_common->ac_init;
ip->InitStructRevision = AAC_INIT_STRUCT_REVISION;
ip->MiniPortRevision = AAC_INIT_STRUCT_MINIPORT_REVISION;
ip->AdapterFibsPhysicalAddress = sc->aac_common_busaddr +
offsetof(struct aac_common, ac_fibs);
ip->AdapterFibsVirtualAddress = 0;
ip->AdapterFibsSize = AAC_ADAPTER_FIBS * sizeof(struct aac_fib);
ip->AdapterFibAlign = sizeof(struct aac_fib);
ip->PrintfBufferAddress = sc->aac_common_busaddr +
offsetof(struct aac_common, ac_printf);
ip->PrintfBufferSize = AAC_PRINTF_BUFSIZE;
/*
* The adapter assumes that pages are 4K in size, except on some
* broken firmware versions that do the page->byte conversion twice,
* therefore 'assuming' that this value is in 16MB units (2^24).
* Round up since the granularity is so high.
*/
ip->HostPhysMemPages = ctob(physmem) / AAC_PAGE_SIZE;
if (sc->flags & AAC_FLAGS_BROKEN_MEMMAP) {
ip->HostPhysMemPages =
(ip->HostPhysMemPages + AAC_PAGE_SIZE) / AAC_PAGE_SIZE;
}
ip->HostElapsedSeconds = time_second; /* reset later if invalid */
/*
* Initialise FIB queues. Note that it appears that the layout of the
* indexes and the segmentation of the entries may be mandated by the
* adapter, which is only told about the base of the queue index fields.
*
* The initial values of the indices are assumed to inform the adapter
* of the sizes of the respective queues, and theoretically it could
* work out the entire layout of the queue structures from this. We
* take the easy route and just lay this area out like everyone else
* does.
*
* The Linux driver uses a much more complex scheme whereby several
* header records are kept for each queue. We use a couple of generic
* list manipulation functions which 'know' the size of each list by
* virtue of a table.
*/
qoffset = offsetof(struct aac_common, ac_qbuf) + AAC_QUEUE_ALIGN;
qoffset &= ~(AAC_QUEUE_ALIGN - 1);
sc->aac_queues =
(struct aac_queue_table *)((uintptr_t)sc->aac_common + qoffset);
ip->CommHeaderAddress = sc->aac_common_busaddr + qoffset;
sc->aac_queues->qt_qindex[AAC_HOST_NORM_CMD_QUEUE][AAC_PRODUCER_INDEX] =
AAC_HOST_NORM_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_NORM_CMD_QUEUE][AAC_CONSUMER_INDEX] =
AAC_HOST_NORM_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_HIGH_CMD_QUEUE][AAC_PRODUCER_INDEX] =
AAC_HOST_HIGH_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_HIGH_CMD_QUEUE][AAC_CONSUMER_INDEX] =
AAC_HOST_HIGH_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_NORM_CMD_QUEUE][AAC_PRODUCER_INDEX] =
AAC_ADAP_NORM_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_NORM_CMD_QUEUE][AAC_CONSUMER_INDEX] =
AAC_ADAP_NORM_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_HIGH_CMD_QUEUE][AAC_PRODUCER_INDEX] =
AAC_ADAP_HIGH_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_HIGH_CMD_QUEUE][AAC_CONSUMER_INDEX] =
AAC_ADAP_HIGH_CMD_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_NORM_RESP_QUEUE][AAC_PRODUCER_INDEX]=
AAC_HOST_NORM_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_NORM_RESP_QUEUE][AAC_CONSUMER_INDEX]=
AAC_HOST_NORM_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_HIGH_RESP_QUEUE][AAC_PRODUCER_INDEX]=
AAC_HOST_HIGH_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_HOST_HIGH_RESP_QUEUE][AAC_CONSUMER_INDEX]=
AAC_HOST_HIGH_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_NORM_RESP_QUEUE][AAC_PRODUCER_INDEX]=
AAC_ADAP_NORM_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_NORM_RESP_QUEUE][AAC_CONSUMER_INDEX]=
AAC_ADAP_NORM_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_HIGH_RESP_QUEUE][AAC_PRODUCER_INDEX]=
AAC_ADAP_HIGH_RESP_ENTRIES;
sc->aac_queues->qt_qindex[AAC_ADAP_HIGH_RESP_QUEUE][AAC_CONSUMER_INDEX]=
AAC_ADAP_HIGH_RESP_ENTRIES;
sc->aac_qentries[AAC_HOST_NORM_CMD_QUEUE] =
&sc->aac_queues->qt_HostNormCmdQueue[0];
sc->aac_qentries[AAC_HOST_HIGH_CMD_QUEUE] =
&sc->aac_queues->qt_HostHighCmdQueue[0];
sc->aac_qentries[AAC_ADAP_NORM_CMD_QUEUE] =
&sc->aac_queues->qt_AdapNormCmdQueue[0];
sc->aac_qentries[AAC_ADAP_HIGH_CMD_QUEUE] =
&sc->aac_queues->qt_AdapHighCmdQueue[0];
sc->aac_qentries[AAC_HOST_NORM_RESP_QUEUE] =
&sc->aac_queues->qt_HostNormRespQueue[0];
sc->aac_qentries[AAC_HOST_HIGH_RESP_QUEUE] =
&sc->aac_queues->qt_HostHighRespQueue[0];
sc->aac_qentries[AAC_ADAP_NORM_RESP_QUEUE] =
&sc->aac_queues->qt_AdapNormRespQueue[0];
sc->aac_qentries[AAC_ADAP_HIGH_RESP_QUEUE] =
&sc->aac_queues->qt_AdapHighRespQueue[0];
/*
* Do controller-type-specific initialisation
*/
switch (sc->aac_hwif) {
case AAC_HWIF_I960RX:
AAC_SETREG4(sc, AAC_RX_ODBR, ~0);
break;
}
/*
* Give the init structure to the controller.
*/
if (aac_sync_command(sc, AAC_MONKER_INITSTRUCT,
sc->aac_common_busaddr +
offsetof(struct aac_common, ac_init), 0, 0, 0,
NULL)) {
device_printf(sc->aac_dev,
"error establishing init structure\n");
error = EIO;
goto out;
}
error = 0;
out:
return(error);
}
/*
* Send a synchronous command to the controller and wait for a result.
*/
static int
aac_sync_command(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1, u_int32_t arg2, u_int32_t arg3,
u_int32_t *sp)
{
time_t then;
u_int32_t status;
debug_called(3);
/* populate the mailbox */
AAC_SET_MAILBOX(sc, command, arg0, arg1, arg2, arg3);
/* ensure the sync command doorbell flag is cleared */
AAC_CLEAR_ISTATUS(sc, AAC_DB_SYNC_COMMAND);
/* then set it to signal the adapter */
AAC_QNOTIFY(sc, AAC_DB_SYNC_COMMAND);
/* spin waiting for the command to complete */
then = time_second;
do {
if (time_second > (then + AAC_IMMEDIATE_TIMEOUT)) {
debug(1, "timed out");
return(EIO);
}
} while (!(AAC_GET_ISTATUS(sc) & AAC_DB_SYNC_COMMAND));
/* clear the completion flag */
AAC_CLEAR_ISTATUS(sc, AAC_DB_SYNC_COMMAND);
/* get the command status */
status = AAC_GET_MAILBOX(sc, 0);
if (sp != NULL)
*sp = status;
return(0);
}
/*
* Grab the sync fib area.
*/
int
aac_alloc_sync_fib(struct aac_softc *sc, struct aac_fib **fib, int flags)
{
/*
* If the force flag is set, the system is shutting down, or in
* trouble. Ignore the mutex.
*/
if (!(flags & AAC_SYNC_LOCK_FORCE))
AAC_LOCK_ACQUIRE(&sc->aac_sync_lock);
*fib = &sc->aac_common->ac_sync_fib;
return (1);
}
/*
* Release the sync fib area.
*/
void
aac_release_sync_fib(struct aac_softc *sc)
{
AAC_LOCK_RELEASE(&sc->aac_sync_lock);
}
/*
* Send a synchronous FIB to the controller and wait for a result.
*/
int
aac_sync_fib(struct aac_softc *sc, u_int32_t command, u_int32_t xferstate,
struct aac_fib *fib, u_int16_t datasize)
{
debug_called(3);
if (datasize > AAC_FIB_DATASIZE)
return(EINVAL);
/*
* Set up the sync FIB
*/
fib->Header.XferState = AAC_FIBSTATE_HOSTOWNED |
AAC_FIBSTATE_INITIALISED |
AAC_FIBSTATE_EMPTY;
fib->Header.XferState |= xferstate;
fib->Header.Command = command;
fib->Header.StructType = AAC_FIBTYPE_TFIB;
fib->Header.Size = sizeof(struct aac_fib) + datasize;
fib->Header.SenderSize = sizeof(struct aac_fib);
fib->Header.SenderFibAddress = 0; /* Not needed */
fib->Header.ReceiverFibAddress = sc->aac_common_busaddr +
offsetof(struct aac_common,
ac_sync_fib);
/*
* Give the FIB to the controller, wait for a response.
*/
if (aac_sync_command(sc, AAC_MONKER_SYNCFIB,
fib->Header.ReceiverFibAddress, 0, 0, 0, NULL)) {
debug(2, "IO error");
return(EIO);
}
return (0);
}
/*
* Adapter-space FIB queue manipulation
*
* Note that the queue implementation here is a little funky; neither the PI or
* CI will ever be zero. This behaviour is a controller feature.
*/
static struct {
int size;
int notify;
} aac_qinfo[] = {
{AAC_HOST_NORM_CMD_ENTRIES, AAC_DB_COMMAND_NOT_FULL},
{AAC_HOST_HIGH_CMD_ENTRIES, 0},
{AAC_ADAP_NORM_CMD_ENTRIES, AAC_DB_COMMAND_READY},
{AAC_ADAP_HIGH_CMD_ENTRIES, 0},
{AAC_HOST_NORM_RESP_ENTRIES, AAC_DB_RESPONSE_NOT_FULL},
{AAC_HOST_HIGH_RESP_ENTRIES, 0},
{AAC_ADAP_NORM_RESP_ENTRIES, AAC_DB_RESPONSE_READY},
{AAC_ADAP_HIGH_RESP_ENTRIES, 0}
};
/*
* Atomically insert an entry into the nominated queue, returns 0 on success or
* EBUSY if the queue is full.
*
* Note: it would be more efficient to defer notifying the controller in
* the case where we may be inserting several entries in rapid succession,
* but implementing this usefully may be difficult (it would involve a
* separate queue/notify interface).
*/
static int
aac_enqueue_fib(struct aac_softc *sc, int queue, struct aac_command *cm)
{
u_int32_t pi, ci;
int error;
u_int32_t fib_size;
u_int32_t fib_addr;
debug_called(3);
fib_size = cm->cm_fib->Header.Size;
fib_addr = cm->cm_fib->Header.ReceiverFibAddress;
/* get the producer/consumer indices */
pi = sc->aac_queues->qt_qindex[queue][AAC_PRODUCER_INDEX];
ci = sc->aac_queues->qt_qindex[queue][AAC_CONSUMER_INDEX];
/* wrap the queue? */
if (pi >= aac_qinfo[queue].size)
pi = 0;
/* check for queue full */
if ((pi + 1) == ci) {
error = EBUSY;
goto out;
}
/* populate queue entry */
(sc->aac_qentries[queue] + pi)->aq_fib_size = fib_size;
(sc->aac_qentries[queue] + pi)->aq_fib_addr = fib_addr;
/* update producer index */
sc->aac_queues->qt_qindex[queue][AAC_PRODUCER_INDEX] = pi + 1;
/*
* To avoid a race with its completion interrupt, place this command on
* the busy queue prior to advertising it to the controller.
*/
aac_enqueue_busy(cm);
/* notify the adapter if we know how */
if (aac_qinfo[queue].notify != 0)
AAC_QNOTIFY(sc, aac_qinfo[queue].notify);
error = 0;
out:
return(error);
}
/*
* Atomically remove one entry from the nominated queue, returns 0 on
* success or ENOENT if the queue is empty.
*/
static int
aac_dequeue_fib(struct aac_softc *sc, int queue, u_int32_t *fib_size,
struct aac_fib **fib_addr)
{
u_int32_t pi, ci;
u_int32_t fib_index;
int error;
int notify;
debug_called(3);
/* get the producer/consumer indices */
pi = sc->aac_queues->qt_qindex[queue][AAC_PRODUCER_INDEX];
ci = sc->aac_queues->qt_qindex[queue][AAC_CONSUMER_INDEX];
/* check for queue empty */
if (ci == pi) {
error = ENOENT;
goto out;
}
/* wrap the pi so the following test works */
if (pi >= aac_qinfo[queue].size)
pi = 0;
notify = 0;
if (ci == pi + 1)
notify++;
/* wrap the queue? */
if (ci >= aac_qinfo[queue].size)
ci = 0;
/* fetch the entry */
*fib_size = (sc->aac_qentries[queue] + ci)->aq_fib_size;
switch (queue) {
case AAC_HOST_NORM_CMD_QUEUE:
case AAC_HOST_HIGH_CMD_QUEUE:
/*
* The aq_fib_addr is only 32 bits wide so it can't be counted
* on to hold an address. For AIF's, the adapter assumes
* that it's giving us an address into the array of AIF fibs.
* Therefore, we have to convert it to an index.
*/
fib_index = (sc->aac_qentries[queue] + ci)->aq_fib_addr /
sizeof(struct aac_fib);
*fib_addr = &sc->aac_common->ac_fibs[fib_index];
break;
case AAC_HOST_NORM_RESP_QUEUE:
case AAC_HOST_HIGH_RESP_QUEUE:
{
struct aac_command *cm;
/*
* As above, an index is used instead of an actual address.
* Gotta shift the index to account for the fast response
* bit. No other correction is needed since this value was
* originally provided by the driver via the SenderFibAddress
* field.
*/
fib_index = (sc->aac_qentries[queue] + ci)->aq_fib_addr;
cm = sc->aac_commands + (fib_index >> 1);
*fib_addr = cm->cm_fib;
/*
* Is this a fast response? If it is, update the fib fields in
* local memory since the whole fib isn't DMA'd back up.
*/
if (fib_index & 0x01) {
(*fib_addr)->Header.XferState |= AAC_FIBSTATE_DONEADAP;
*((u_int32_t*)((*fib_addr)->data)) = AAC_ERROR_NORMAL;
}
break;
}
default:
panic("Invalid queue in aac_dequeue_fib()");
break;
}
/* update consumer index */
sc->aac_queues->qt_qindex[queue][AAC_CONSUMER_INDEX] = ci + 1;
/* if we have made the queue un-full, notify the adapter */
if (notify && (aac_qinfo[queue].notify != 0))
AAC_QNOTIFY(sc, aac_qinfo[queue].notify);
error = 0;
out:
return(error);
}
/*
* Put our response to an Adapter Initialed Fib on the response queue
*/
static int
aac_enqueue_response(struct aac_softc *sc, int queue, struct aac_fib *fib)
{
u_int32_t pi, ci;
int error;
u_int32_t fib_size;
u_int32_t fib_addr;
debug_called(1);
/* Tell the adapter where the FIB is */
fib_size = fib->Header.Size;
fib_addr = fib->Header.SenderFibAddress;
fib->Header.ReceiverFibAddress = fib_addr;
/* get the producer/consumer indices */
pi = sc->aac_queues->qt_qindex[queue][AAC_PRODUCER_INDEX];
ci = sc->aac_queues->qt_qindex[queue][AAC_CONSUMER_INDEX];
/* wrap the queue? */
if (pi >= aac_qinfo[queue].size)
pi = 0;
/* check for queue full */
if ((pi + 1) == ci) {
error = EBUSY;
goto out;
}
/* populate queue entry */
(sc->aac_qentries[queue] + pi)->aq_fib_size = fib_size;
(sc->aac_qentries[queue] + pi)->aq_fib_addr = fib_addr;
/* update producer index */
sc->aac_queues->qt_qindex[queue][AAC_PRODUCER_INDEX] = pi + 1;
/* notify the adapter if we know how */
if (aac_qinfo[queue].notify != 0)
AAC_QNOTIFY(sc, aac_qinfo[queue].notify);
error = 0;
out:
return(error);
}
/*
* Check for commands that have been outstanding for a suspiciously long time,
* and complain about them.
*/
static void
aac_timeout(struct aac_softc *sc)
{
struct aac_command *cm;
time_t deadline;
/*
* Traverse the busy command list, bitch about late commands once
* only.
*/
deadline = time_second - AAC_CMD_TIMEOUT;
TAILQ_FOREACH(cm, &sc->aac_busy, cm_link) {
if ((cm->cm_timestamp < deadline)
/* && !(cm->cm_flags & AAC_CMD_TIMEDOUT) */) {
cm->cm_flags |= AAC_CMD_TIMEDOUT;
device_printf(sc->aac_dev,
"COMMAND %p TIMEOUT AFTER %d SECONDS\n",
cm, (int)(time_second-cm->cm_timestamp));
AAC_PRINT_FIB(sc, cm->cm_fib);
}
}
return;
}
/*
* Interface Function Vectors
*/
/*
* Read the current firmware status word.
*/
static int
aac_sa_get_fwstatus(struct aac_softc *sc)
{
debug_called(3);
return(AAC_GETREG4(sc, AAC_SA_FWSTATUS));
}
static int
aac_rx_get_fwstatus(struct aac_softc *sc)
{
debug_called(3);
return(AAC_GETREG4(sc, AAC_RX_FWSTATUS));
}
static int
aac_fa_get_fwstatus(struct aac_softc *sc)
{
int val;
debug_called(3);
val = AAC_GETREG4(sc, AAC_FA_FWSTATUS);
return (val);
}
/*
* Notify the controller of a change in a given queue
*/
static void
aac_sa_qnotify(struct aac_softc *sc, int qbit)
{
debug_called(3);
AAC_SETREG2(sc, AAC_SA_DOORBELL1_SET, qbit);
}
static void
aac_rx_qnotify(struct aac_softc *sc, int qbit)
{
debug_called(3);
AAC_SETREG4(sc, AAC_RX_IDBR, qbit);
}
static void
aac_fa_qnotify(struct aac_softc *sc, int qbit)
{
debug_called(3);
AAC_SETREG2(sc, AAC_FA_DOORBELL1, qbit);
AAC_FA_HACK(sc);
}
/*
* Get the interrupt reason bits
*/
static int
aac_sa_get_istatus(struct aac_softc *sc)
{
debug_called(3);
return(AAC_GETREG2(sc, AAC_SA_DOORBELL0));
}
static int
aac_rx_get_istatus(struct aac_softc *sc)
{
debug_called(3);
return(AAC_GETREG4(sc, AAC_RX_ODBR));
}
static int
aac_fa_get_istatus(struct aac_softc *sc)
{
int val;
debug_called(3);
val = AAC_GETREG2(sc, AAC_FA_DOORBELL0);
return (val);
}
/*
* Clear some interrupt reason bits
*/
static void
aac_sa_clear_istatus(struct aac_softc *sc, int mask)
{
debug_called(3);
AAC_SETREG2(sc, AAC_SA_DOORBELL0_CLEAR, mask);
}
static void
aac_rx_clear_istatus(struct aac_softc *sc, int mask)
{
debug_called(3);
AAC_SETREG4(sc, AAC_RX_ODBR, mask);
}
static void
aac_fa_clear_istatus(struct aac_softc *sc, int mask)
{
debug_called(3);
AAC_SETREG2(sc, AAC_FA_DOORBELL0_CLEAR, mask);
AAC_FA_HACK(sc);
}
/*
* Populate the mailbox and set the command word
*/
static void
aac_sa_set_mailbox(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1, u_int32_t arg2, u_int32_t arg3)
{
debug_called(4);
AAC_SETREG4(sc, AAC_SA_MAILBOX, command);
AAC_SETREG4(sc, AAC_SA_MAILBOX + 4, arg0);
AAC_SETREG4(sc, AAC_SA_MAILBOX + 8, arg1);
AAC_SETREG4(sc, AAC_SA_MAILBOX + 12, arg2);
AAC_SETREG4(sc, AAC_SA_MAILBOX + 16, arg3);
}
static void
aac_rx_set_mailbox(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1, u_int32_t arg2, u_int32_t arg3)
{
debug_called(4);
AAC_SETREG4(sc, AAC_RX_MAILBOX, command);
AAC_SETREG4(sc, AAC_RX_MAILBOX + 4, arg0);
AAC_SETREG4(sc, AAC_RX_MAILBOX + 8, arg1);
AAC_SETREG4(sc, AAC_RX_MAILBOX + 12, arg2);
AAC_SETREG4(sc, AAC_RX_MAILBOX + 16, arg3);
}
static void
aac_fa_set_mailbox(struct aac_softc *sc, u_int32_t command,
u_int32_t arg0, u_int32_t arg1, u_int32_t arg2, u_int32_t arg3)
{
debug_called(4);
AAC_SETREG4(sc, AAC_FA_MAILBOX, command);
AAC_FA_HACK(sc);
AAC_SETREG4(sc, AAC_FA_MAILBOX + 4, arg0);
AAC_FA_HACK(sc);
AAC_SETREG4(sc, AAC_FA_MAILBOX + 8, arg1);
AAC_FA_HACK(sc);
AAC_SETREG4(sc, AAC_FA_MAILBOX + 12, arg2);
AAC_FA_HACK(sc);
AAC_SETREG4(sc, AAC_FA_MAILBOX + 16, arg3);
AAC_FA_HACK(sc);
}
/*
* Fetch the immediate command status word
*/
static int
aac_sa_get_mailbox(struct aac_softc *sc, int mb)
{
debug_called(4);
return(AAC_GETREG4(sc, AAC_SA_MAILBOX + (mb * 4)));
}
static int
aac_rx_get_mailbox(struct aac_softc *sc, int mb)
{
debug_called(4);
return(AAC_GETREG4(sc, AAC_RX_MAILBOX + (mb * 4)));
}
static int
aac_fa_get_mailbox(struct aac_softc *sc, int mb)
{
int val;
debug_called(4);
val = AAC_GETREG4(sc, AAC_FA_MAILBOX + (mb * 4));
return (val);
}
/*
* Set/clear interrupt masks
*/
static void
aac_sa_set_interrupts(struct aac_softc *sc, int enable)
{
debug(2, "%sable interrupts", enable ? "en" : "dis");
if (enable) {
AAC_SETREG2((sc), AAC_SA_MASK0_CLEAR, AAC_DB_INTERRUPTS);
} else {
AAC_SETREG2((sc), AAC_SA_MASK0_SET, ~0);
}
}
static void
aac_rx_set_interrupts(struct aac_softc *sc, int enable)
{
debug(2, "%sable interrupts", enable ? "en" : "dis");
if (enable) {
AAC_SETREG4(sc, AAC_RX_OIMR, ~AAC_DB_INTERRUPTS);
} else {
AAC_SETREG4(sc, AAC_RX_OIMR, ~0);
}
}
static void
aac_fa_set_interrupts(struct aac_softc *sc, int enable)
{
debug(2, "%sable interrupts", enable ? "en" : "dis");
if (enable) {
AAC_SETREG2((sc), AAC_FA_MASK0_CLEAR, AAC_DB_INTERRUPTS);
AAC_FA_HACK(sc);
} else {
AAC_SETREG2((sc), AAC_FA_MASK0, ~0);
AAC_FA_HACK(sc);
}
}
/*
* Debugging and Diagnostics
*/
/*
* Print some information about the controller.
*/
static void
aac_describe_controller(struct aac_softc *sc)
{
struct aac_fib *fib;
struct aac_adapter_info *info;
debug_called(2);
aac_alloc_sync_fib(sc, &fib, 0);
fib->data[0] = 0;
if (aac_sync_fib(sc, RequestAdapterInfo, 0, fib, 1)) {
device_printf(sc->aac_dev, "RequestAdapterInfo failed\n");
aac_release_sync_fib(sc);
return;
}
info = (struct aac_adapter_info *)&fib->data[0];
device_printf(sc->aac_dev, "%s %dMHz, %dMB cache memory, %s\n",
aac_describe_code(aac_cpu_variant, info->CpuVariant),
info->ClockSpeed, info->BufferMem / (1024 * 1024),
aac_describe_code(aac_battery_platform,
info->batteryPlatform));
/* save the kernel revision structure for later use */
sc->aac_revision = info->KernelRevision;
device_printf(sc->aac_dev, "Kernel %d.%d-%d, Build %d, S/N %6X\n",
info->KernelRevision.external.comp.major,
info->KernelRevision.external.comp.minor,
info->KernelRevision.external.comp.dash,
info->KernelRevision.buildNumber,
(u_int32_t)(info->SerialNumber & 0xffffff));
aac_release_sync_fib(sc);
if (1 || bootverbose) {
device_printf(sc->aac_dev, "Supported Options=%b\n",
sc->supported_options,
"\20"
"\1SNAPSHOT"
"\2CLUSTERS"
"\3WCACHE"
"\4DATA64"
"\5HOSTTIME"
"\6RAID50"
"\7WINDOW4GB"
"\10SCSIUPGD"
"\11SOFTERR"
"\12NORECOND"
"\13SGMAP64"
"\14ALARM"
"\15NONDASD");
}
}
/*
* Look up a text description of a numeric error code and return a pointer to
* same.
*/
static char *
aac_describe_code(struct aac_code_lookup *table, u_int32_t code)
{
int i;
for (i = 0; table[i].string != NULL; i++)
if (table[i].code == code)
return(table[i].string);
return(table[i + 1].string);
}
/*
* Management Interface
*/
static int
aac_open(dev_t dev, int flags, int fmt, d_thread_t *td)
{
struct aac_softc *sc;
debug_called(2);
sc = dev->si_drv1;
/* Check to make sure the device isn't already open */
if (sc->aac_state & AAC_STATE_OPEN) {
return EBUSY;
}
sc->aac_state |= AAC_STATE_OPEN;
return 0;
}
static int
aac_close(dev_t dev, int flags, int fmt, d_thread_t *td)
{
struct aac_softc *sc;
debug_called(2);
sc = dev->si_drv1;
/* Mark this unit as no longer open */
sc->aac_state &= ~AAC_STATE_OPEN;
return 0;
}
static int
aac_ioctl(dev_t dev, u_long cmd, caddr_t arg, int flag, d_thread_t *td)
{
union aac_statrequest *as;
struct aac_softc *sc;
int error = 0;
uint32_t cookie;
debug_called(2);
as = (union aac_statrequest *)arg;
sc = dev->si_drv1;
switch (cmd) {
case AACIO_STATS:
switch (as->as_item) {
case AACQ_FREE:
case AACQ_BIO:
case AACQ_READY:
case AACQ_BUSY:
case AACQ_COMPLETE:
bcopy(&sc->aac_qstat[as->as_item], &as->as_qstat,
sizeof(struct aac_qstat));
break;
default:
error = ENOENT;
break;
}
break;
case FSACTL_SENDFIB:
arg = *(caddr_t*)arg;
case FSACTL_LNX_SENDFIB:
debug(1, "FSACTL_SENDFIB");
error = aac_ioctl_sendfib(sc, arg);
break;
case FSACTL_AIF_THREAD:
case FSACTL_LNX_AIF_THREAD:
debug(1, "FSACTL_AIF_THREAD");
error = EINVAL;
break;
case FSACTL_OPEN_GET_ADAPTER_FIB:
arg = *(caddr_t*)arg;
case FSACTL_LNX_OPEN_GET_ADAPTER_FIB:
debug(1, "FSACTL_OPEN_GET_ADAPTER_FIB");
/*
* Pass the caller out an AdapterFibContext.
*
* Note that because we only support one opener, we
* basically ignore this. Set the caller's context to a magic
* number just in case.
*
* The Linux code hands the driver a pointer into kernel space,
* and then trusts it when the caller hands it back. Aiee!
* Here, we give it the proc pointer of the per-adapter aif
* thread. It's only used as a sanity check in other calls.
*/
cookie = (uint32_t)(uintptr_t)sc->aifthread;
error = copyout(&cookie, arg, sizeof(cookie));
break;
case FSACTL_GET_NEXT_ADAPTER_FIB:
arg = *(caddr_t*)arg;
case FSACTL_LNX_GET_NEXT_ADAPTER_FIB:
debug(1, "FSACTL_GET_NEXT_ADAPTER_FIB");
error = aac_getnext_aif(sc, arg);
break;
case FSACTL_CLOSE_GET_ADAPTER_FIB:
case FSACTL_LNX_CLOSE_GET_ADAPTER_FIB:
debug(1, "FSACTL_CLOSE_GET_ADAPTER_FIB");
/* don't do anything here */
break;
case FSACTL_MINIPORT_REV_CHECK:
arg = *(caddr_t*)arg;
case FSACTL_LNX_MINIPORT_REV_CHECK:
debug(1, "FSACTL_MINIPORT_REV_CHECK");
error = aac_rev_check(sc, arg);
break;
case FSACTL_QUERY_DISK:
arg = *(caddr_t*)arg;
case FSACTL_LNX_QUERY_DISK:
debug(1, "FSACTL_QUERY_DISK");
error = aac_query_disk(sc, arg);
break;
case FSACTL_DELETE_DISK:
case FSACTL_LNX_DELETE_DISK:
/*
* We don't trust the underland to tell us when to delete a
* container, rather we rely on an AIF coming from the
* controller
*/
error = 0;
break;
default:
debug(1, "unsupported cmd 0x%lx\n", cmd);
error = EINVAL;
break;
}
return(error);
}
static int
aac_poll(dev_t dev, int poll_events, d_thread_t *td)
{
struct aac_softc *sc;
int revents;
sc = dev->si_drv1;
revents = 0;
AAC_LOCK_ACQUIRE(&sc->aac_aifq_lock);
if ((poll_events & (POLLRDNORM | POLLIN)) != 0) {
if (sc->aac_aifq_tail != sc->aac_aifq_head)
revents |= poll_events & (POLLIN | POLLRDNORM);
}
AAC_LOCK_RELEASE(&sc->aac_aifq_lock);
if (revents == 0) {
if (poll_events & (POLLIN | POLLRDNORM))
selrecord(td, &sc->rcv_select);
}
return (revents);
}
/*
* Send a FIB supplied from userspace
*/
static int
aac_ioctl_sendfib(struct aac_softc *sc, caddr_t ufib)
{
struct aac_command *cm;
int size, error;
debug_called(2);
cm = NULL;
/*
* Get a command
*/
AAC_LOCK_ACQUIRE(&sc->aac_io_lock);
if (aac_alloc_command(sc, &cm)) {
error = EBUSY;
goto out;
}
/*
* Fetch the FIB header, then re-copy to get data as well.
*/
if ((error = copyin(ufib, cm->cm_fib,
sizeof(struct aac_fib_header))) != 0)
goto out;
size = cm->cm_fib->Header.Size + sizeof(struct aac_fib_header);
if (size > sizeof(struct aac_fib)) {
device_printf(sc->aac_dev, "incoming FIB oversized (%d > %zd)\n",
size, sizeof(struct aac_fib));
size = sizeof(struct aac_fib);
}
if ((error = copyin(ufib, cm->cm_fib, size)) != 0)
goto out;
cm->cm_fib->Header.Size = size;
cm->cm_timestamp = time_second;
/*
* Pass the FIB to the controller, wait for it to complete.
*/
if ((error = aac_wait_command(cm, 30)) != 0) { /* XXX user timeout? */
device_printf(sc->aac_dev,
"aac_wait_command return %d\n", error);
goto out;
}
/*
* Copy the FIB and data back out to the caller.
*/
size = cm->cm_fib->Header.Size;
if (size > sizeof(struct aac_fib)) {
device_printf(sc->aac_dev, "outbound FIB oversized (%d > %zd)\n",
size, sizeof(struct aac_fib));
size = sizeof(struct aac_fib);
}
error = copyout(cm->cm_fib, ufib, size);
out:
if (cm != NULL) {
aac_release_command(cm);
}
AAC_LOCK_RELEASE(&sc->aac_io_lock);
return(error);
}
/*
* Handle an AIF sent to us by the controller; queue it for later reference.
* If the queue fills up, then drop the older entries.
*/
static void
aac_handle_aif(struct aac_softc *sc, struct aac_fib *fib)
{
struct aac_aif_command *aif;
struct aac_container *co, *co_next;
struct aac_mntinfo *mi;
struct aac_mntinforesp *mir = NULL;
u_int16_t rsize;
int next, found;
int count = 0, added = 0, i = 0;
debug_called(2);
aif = (struct aac_aif_command*)&fib->data[0];
aac_print_aif(sc, aif);
/* Is it an event that we should care about? */
switch (aif->command) {
case AifCmdEventNotify:
switch (aif->data.EN.type) {
case AifEnAddContainer:
case AifEnDeleteContainer:
/*
* A container was added or deleted, but the message
* doesn't tell us anything else! Re-enumerate the
* containers and sort things out.
*/
aac_alloc_sync_fib(sc, &fib, 0);
mi = (struct aac_mntinfo *)&fib->data[0];
do {
/*
* Ask the controller for its containers one at
* a time.
* XXX What if the controller's list changes
* midway through this enumaration?
* XXX This should be done async.
*/
bzero(mi, sizeof(struct aac_mntinfo));
mi->Command = VM_NameServe;
mi->MntType = FT_FILESYS;
mi->MntCount = i;
rsize = sizeof(mir);
if (aac_sync_fib(sc, ContainerCommand, 0, fib,
sizeof(struct aac_mntinfo))) {
printf("Error probing container %d\n",
i);
continue;
}
mir = (struct aac_mntinforesp *)&fib->data[0];
/* XXX Need to check if count changed */
count = mir->MntRespCount;
/*
* Check the container against our list.
* co->co_found was already set to 0 in a
* previous run.
*/
if ((mir->Status == ST_OK) &&
(mir->MntTable[0].VolType != CT_NONE)) {
found = 0;
TAILQ_FOREACH(co,
&sc->aac_container_tqh,
co_link) {
if (co->co_mntobj.ObjectId ==
mir->MntTable[0].ObjectId) {
co->co_found = 1;
found = 1;
break;
}
}
/*
* If the container matched, continue
* in the list.
*/
if (found) {
i++;
continue;
}
/*
* This is a new container. Do all the
* appropriate things to set it up.
*/
aac_add_container(sc, mir, 1);
added = 1;
}
i++;
} while ((i < count) && (i < AAC_MAX_CONTAINERS));
aac_release_sync_fib(sc);
/*
* Go through our list of containers and see which ones
* were not marked 'found'. Since the controller didn't
* list them they must have been deleted. Do the
* appropriate steps to destroy the device. Also reset
* the co->co_found field.
*/
co = TAILQ_FIRST(&sc->aac_container_tqh);
while (co != NULL) {
if (co->co_found == 0) {
device_delete_child(sc->aac_dev,
co->co_disk);
co_next = TAILQ_NEXT(co, co_link);
AAC_LOCK_ACQUIRE(&sc->
aac_container_lock);
TAILQ_REMOVE(&sc->aac_container_tqh, co,
co_link);
AAC_LOCK_RELEASE(&sc->
aac_container_lock);
FREE(co, M_AACBUF);
co = co_next;
} else {
co->co_found = 0;
co = TAILQ_NEXT(co, co_link);
}
}
/* Attach the newly created containers */
if (added)
bus_generic_attach(sc->aac_dev);
break;
default:
break;
}
default:
break;
}
/* Copy the AIF data to the AIF queue for ioctl retrieval */
AAC_LOCK_ACQUIRE(&sc->aac_aifq_lock);
next = (sc->aac_aifq_head + 1) % AAC_AIFQ_LENGTH;
if (next != sc->aac_aifq_tail) {
bcopy(aif, &sc->aac_aifq[next], sizeof(struct aac_aif_command));
sc->aac_aifq_head = next;
/* On the off chance that someone is sleeping for an aif... */
if (sc->aac_state & AAC_STATE_AIF_SLEEPER)
wakeup(sc->aac_aifq);
/* Wakeup any poll()ers */
selwakeup(&sc->rcv_select);
}
AAC_LOCK_RELEASE(&sc->aac_aifq_lock);
return;
}
/*
* Return the Revision of the driver to userspace and check to see if the
* userspace app is possibly compatible. This is extremely bogus since
* our driver doesn't follow Adaptec's versioning system. Cheat by just
* returning what the card reported.
*/
static int
aac_rev_check(struct aac_softc *sc, caddr_t udata)
{
struct aac_rev_check rev_check;
struct aac_rev_check_resp rev_check_resp;
int error = 0;
debug_called(2);
/*
* Copyin the revision struct from userspace
*/
if ((error = copyin(udata, (caddr_t)&rev_check,
sizeof(struct aac_rev_check))) != 0) {
return error;
}
debug(2, "Userland revision= %d\n",
rev_check.callingRevision.buildNumber);
/*
* Doctor up the response struct.
*/
rev_check_resp.possiblyCompatible = 1;
rev_check_resp.adapterSWRevision.external.ul =
sc->aac_revision.external.ul;
rev_check_resp.adapterSWRevision.buildNumber =
sc->aac_revision.buildNumber;
return(copyout((caddr_t)&rev_check_resp, udata,
sizeof(struct aac_rev_check_resp)));
}
/*
* Pass the caller the next AIF in their queue
*/
static int
aac_getnext_aif(struct aac_softc *sc, caddr_t arg)
{
struct get_adapter_fib_ioctl agf;
int error;
debug_called(2);
if ((error = copyin(arg, &agf, sizeof(agf))) == 0) {
/*
* Check the magic number that we gave the caller.
*/
if (agf.AdapterFibContext != (int)(uintptr_t)sc->aifthread) {
error = EFAULT;
} else {
error = aac_return_aif(sc, agf.AifFib);
if ((error == EAGAIN) && (agf.Wait)) {
sc->aac_state |= AAC_STATE_AIF_SLEEPER;
while (error == EAGAIN) {
error = tsleep(sc->aac_aifq, PRIBIO |
PCATCH, "aacaif", 0);
if (error == 0)
error = aac_return_aif(sc,
agf.AifFib);
}
sc->aac_state &= ~AAC_STATE_AIF_SLEEPER;
}
}
}
return(error);
}
/*
* Hand the next AIF off the top of the queue out to userspace.
*/
static int
aac_return_aif(struct aac_softc *sc, caddr_t uptr)
{
int next, error;
debug_called(2);
AAC_LOCK_ACQUIRE(&sc->aac_aifq_lock);
if (sc->aac_aifq_tail == sc->aac_aifq_head) {
AAC_LOCK_RELEASE(&sc->aac_aifq_lock);
return (EAGAIN);
}
next = (sc->aac_aifq_tail + 1) % AAC_AIFQ_LENGTH;
error = copyout(&sc->aac_aifq[next], uptr,
sizeof(struct aac_aif_command));
if (error)
device_printf(sc->aac_dev,
"aac_return_aif: copyout returned %d\n", error);
else
sc->aac_aifq_tail = next;
AAC_LOCK_RELEASE(&sc->aac_aifq_lock);
return(error);
}
/*
* Give the userland some information about the container. The AAC arch
* expects the driver to be a SCSI passthrough type driver, so it expects
* the containers to have b:t:l numbers. Fake it.
*/
static int
aac_query_disk(struct aac_softc *sc, caddr_t uptr)
{
struct aac_query_disk query_disk;
struct aac_container *co;
struct aac_disk *disk;
int error, id;
debug_called(2);
disk = NULL;
error = copyin(uptr, (caddr_t)&query_disk,
sizeof(struct aac_query_disk));
if (error)
return (error);
id = query_disk.ContainerNumber;
if (id == -1)
return (EINVAL);
AAC_LOCK_ACQUIRE(&sc->aac_container_lock);
TAILQ_FOREACH(co, &sc->aac_container_tqh, co_link) {
if (co->co_mntobj.ObjectId == id)
break;
}
if (co == NULL) {
query_disk.Valid = 0;
query_disk.Locked = 0;
query_disk.Deleted = 1; /* XXX is this right? */
} else {
disk = device_get_softc(co->co_disk);
query_disk.Valid = 1;
query_disk.Locked =
(disk->ad_flags & AAC_DISK_OPEN) ? 1 : 0;
query_disk.Deleted = 0;
query_disk.Bus = device_get_unit(sc->aac_dev);
query_disk.Target = disk->unit;
query_disk.Lun = 0;
query_disk.UnMapped = 0;
sprintf(&query_disk.diskDeviceName[0], "%s%d",
disk->ad_disk.d_name, disk->ad_disk.d_unit);
}
AAC_LOCK_RELEASE(&sc->aac_container_lock);
error = copyout((caddr_t)&query_disk, uptr,
sizeof(struct aac_query_disk));
return (error);
}
static void
aac_get_bus_info(struct aac_softc *sc)
{
struct aac_fib *fib;
struct aac_ctcfg *c_cmd;
struct aac_ctcfg_resp *c_resp;
struct aac_vmioctl *vmi;
struct aac_vmi_businf_resp *vmi_resp;
struct aac_getbusinf businfo;
struct aac_sim *caminf;
device_t child;
int i, found, error;
aac_alloc_sync_fib(sc, &fib, 0);
c_cmd = (struct aac_ctcfg *)&fib->data[0];
bzero(c_cmd, sizeof(struct aac_ctcfg));
c_cmd->Command = VM_ContainerConfig;
c_cmd->cmd = CT_GET_SCSI_METHOD;
c_cmd->param = 0;
error = aac_sync_fib(sc, ContainerCommand, 0, fib,
sizeof(struct aac_ctcfg));
if (error) {
device_printf(sc->aac_dev, "Error %d sending "
"VM_ContainerConfig command\n", error);
aac_release_sync_fib(sc);
return;
}
c_resp = (struct aac_ctcfg_resp *)&fib->data[0];
if (c_resp->Status != ST_OK) {
device_printf(sc->aac_dev, "VM_ContainerConfig returned 0x%x\n",
c_resp->Status);
aac_release_sync_fib(sc);
return;
}
sc->scsi_method_id = c_resp->param;
vmi = (struct aac_vmioctl *)&fib->data[0];
bzero(vmi, sizeof(struct aac_vmioctl));
vmi->Command = VM_Ioctl;
vmi->ObjType = FT_DRIVE;
vmi->MethId = sc->scsi_method_id;
vmi->ObjId = 0;
vmi->IoctlCmd = GetBusInfo;
error = aac_sync_fib(sc, ContainerCommand, 0, fib,
sizeof(struct aac_vmioctl));
if (error) {
device_printf(sc->aac_dev, "Error %d sending VMIoctl command\n",
error);
aac_release_sync_fib(sc);
return;
}
vmi_resp = (struct aac_vmi_businf_resp *)&fib->data[0];
if (vmi_resp->Status != ST_OK) {
device_printf(sc->aac_dev, "VM_Ioctl returned %d\n",
vmi_resp->Status);
aac_release_sync_fib(sc);
return;
}
bcopy(&vmi_resp->BusInf, &businfo, sizeof(struct aac_getbusinf));
aac_release_sync_fib(sc);
found = 0;
for (i = 0; i < businfo.BusCount; i++) {
if (businfo.BusValid[i] != AAC_BUS_VALID)
continue;
caminf = (struct aac_sim *)malloc( sizeof(struct aac_sim),
M_AACBUF, M_NOWAIT | M_ZERO);
if (caminf == NULL)
continue;
child = device_add_child(sc->aac_dev, "aacp", -1);
if (child == NULL) {
device_printf(sc->aac_dev, "device_add_child failed\n");
continue;
}
caminf->TargetsPerBus = businfo.TargetsPerBus;
caminf->BusNumber = i;
caminf->InitiatorBusId = businfo.InitiatorBusId[i];
caminf->aac_sc = sc;
caminf->sim_dev = child;
device_set_ivars(child, caminf);
device_set_desc(child, "SCSI Passthrough Bus");
TAILQ_INSERT_TAIL(&sc->aac_sim_tqh, caminf, sim_link);
found = 1;
}
if (found)
bus_generic_attach(sc->aac_dev);
return;
}