d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2e6d3b4614
freebsd-dev/sys/dev/pst/pst-iop.h

629 lines
20 KiB
C
Raw Normal View History

Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
/*-
* Copyright (c) 2001,2002 S<EFBFBD>ren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/* misc defines */
MALLOC_DECLARE(M_PSTIOP);
#define I2O_IOP_OUTBOUND_FRAME_COUNT 32
#define I2O_IOP_OUTBOUND_FRAME_SIZE 0x20
/* structure defs */
struct out_mfa_buf {
u_int32_t buf[I2O_IOP_OUTBOUND_FRAME_SIZE];
};
struct iop_softc {
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
struct resource *r_mem;
struct resource *r_irq;
caddr_t ibase;
u_int32_t phys_ibase;
caddr_t obase;
u_int32_t phys_obase;
struct i2o_registers *reg;
struct i2o_status_get_reply *status;
int lct_count;
struct i2o_lct_entry *lct;
device_t dev;
void *handle;
struct intr_config_hook *iop_delayed_attach;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
};
/* structure at start of IOP shared mem */
struct i2o_registers {
volatile u_int32_t apic_select;
volatile u_int32_t reserved0;
volatile u_int32_t apic_winreg;
volatile u_int32_t reserved1;
volatile u_int32_t iqueue_reg0;
volatile u_int32_t iqueue_reg1;
volatile u_int32_t oqueue_reg0;
volatile u_int32_t oqueue_reg1;
volatile u_int32_t iqueue_event;
volatile u_int32_t iqueue_intr_status;
volatile u_int32_t iqueue_intr_mask;
volatile u_int32_t oqueue_event;
volatile u_int32_t oqueue_intr_status;
volatile u_int32_t oqueue_intr_mask;
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
#define I2O_OUT_INTR_QUEUE 0x08
#define I2O_OUT_INTR_BELL 0x04
#define I2O_OUT_INTR_MSG1 0x02
#define I2O_OUT_INTR_MSG0 0x01
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
volatile u_int64_t reserved2;
volatile u_int32_t iqueue;
volatile u_int32_t oqueue;
volatile u_int64_t reserved3;
volatile u_int64_t mac_addr;
volatile u_int32_t ip_addr;
volatile u_int32_t ip_mask;
};
/* Scatter/Gather List management */
struct i2o_sgl {
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
u_int32_t count:24;
#define I2O_SGL_CNT_MASK 0xffffff
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
u_int32_t flags:8;
#define I2O_SGL_SIMPLE 0x10
#define I2O_SGL_PAGELIST 0x20
#define I2O_SGL_CHAIN 0x30
#define I2O_SGL_ATTRIBUTE 0x7c
#define I2O_SGL_BC0 0x01
#define I2O_SGL_BC1 0x02
#define I2O_SGL_DIR 0x04
#define I2O_SGL_LA 0x08
#define I2O_SGL_EOB 0x40
#define I2O_SGL_END 0x80
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
u_int32_t phys_addr[1];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
#define I2O_SGL_MAX_SEGS ((I2O_IOP_OUTBOUND_FRAME_SIZE - (8 + 2)) + 1)
/* i2o command codes */
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
#define I2O_UTIL_NOP 0x00
#define I2O_UTIL_PARAMS_GET 0x06
#define I2O_UTIL_CLAIM 0x09
#define I2O_UTIL_CONFIG_DIALOG 0x10
#define I2O_UTIL_EVENT_REGISTER 0x13
#define I2O_BSA_BLOCK_READ 0x30
#define I2O_BSA_BLOCK_WRITE 0x31
#define I2O_BSA_CACHE_FLUSH 0x37
#define I2O_EXEC_STATUS_GET 0xa0
#define I2O_EXEC_OUTBOUND_INIT 0xa1
#define I2O_EXEC_LCT_NOTIFY 0xa2
#define I2O_EXEC_SYSTAB_SET 0xa3
#define I2O_EXEC_IOP_RESET 0xbd
#define I2O_EXEC_SYS_ENABLE 0xd1
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
/* basic message layout */
struct i2o_basic_message {
u_int8_t version:4;
u_int8_t offset:4;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
Fix args for contigmalloc, cosmetics.
2002-08-18 12:20:33 +00:00
u_int32_t transaction_context;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
/* basic reply layout */
struct i2o_single_reply {
u_int8_t version_offset;
u_int8_t message_flags;
#define I2O_MESSAGE_FLAGS_STATIC 0x01
#define I2O_MESSAGE_FLAGS_64BIT 0x02
#define I2O_MESSAGE_FLAGS_MULTIPLE 0x10
#define I2O_MESSAGE_FLAGS_FAIL 0x20
#define I2O_MESSAGE_FLAGS_LAST 0x40
#define I2O_MESSAGE_FLAGS_REPLY 0x80
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int16_t detailed_status;
#define I2O_DETAIL_STATUS_SUCCESS 0x0000
#define I2O_DETAIL_STATUS_BAD_KEY 0x0002
#define I2O_DETAIL_STATUS_TCL_ERROR 0x0003
#define I2O_DETAIL_STATUS_REPLY_BUFFER_FULL 0x0004
#define I2O_DETAIL_STATUS_NO_SUCH_PAGE 0x0005
#define I2O_DETAIL_STATUS_INSUFFICIENT_RESOURCE_SOFT 0x0006
#define I2O_DETAIL_STATUS_INSUFFICIENT_RESOURCE_HARD 0x0007
#define I2O_DETAIL_STATUS_CHAIN_BUFFER_TOO_LARGE 0x0009
#define I2O_DETAIL_STATUS_UNSUPPORTED_FUNCTION 0x000a
#define I2O_DETAIL_STATUS_DEVICE_LOCKED 0x000b
#define I2O_DETAIL_STATUS_DEVICE_RESET 0x000c
#define I2O_DETAIL_STATUS_INAPPROPRIATE_FUNCTION 0x000d
#define I2O_DETAIL_STATUS_INVALID_INITIATOR_ADDRESS 0x000e
#define I2O_DETAIL_STATUS_INVALID_MESSAGE_FLAGS 0x000f
#define I2O_DETAIL_STATUS_INVALID_OFFSET 0x0010
#define I2O_DETAIL_STATUS_INVALID_PARAMETER 0x0011
#define I2O_DETAIL_STATUS_INVALID_REQUEST 0x0012
#define I2O_DETAIL_STATUS_INVALID_TARGET_ADDRESS 0x0013
#define I2O_DETAIL_STATUS_MESSAGE_TOO_LARGE 0x0014
#define I2O_DETAIL_STATUS_MESSAGE_TOO_SMALL 0x0015
#define I2O_DETAIL_STATUS_MISSING_PARAMETER 0x0016
#define I2O_DETAIL_STATUS_TIMEOUT 0x0017
#define I2O_DETAIL_STATUS_UNKNOWN_ERROR 0x0018
#define I2O_DETAIL_STATUS_UNKNOWN_FUNCTION 0x0019
#define I2O_DETAIL_STATUS_UNSUPPORTED_VERSION 0x001a
#define I2O_DETAIL_STATUS_DEVICE_BUSY 0x001b
#define I2O_DETAIL_STATUS_DEVICE_NOT_AVAILABLE 0x001c
u_int8_t retry_count;
u_int8_t status;
#define I2O_REPLY_STATUS_SUCCESS 0x00
#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06
#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08
#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0a
#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0b
#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80
u_int32_t donecount;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_fault_reply {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int8_t lowest_version;
u_int8_t highest_version;
u_int8_t severity;
#define I2O_SEVERITY_FORMAT_ERROR 0x01
#define I2O_SEVERITY_PATH_ERROR 0x02
#define I2O_SEVERITY_PATH_STATE 0x04
#define I2O_SEVERITY_CONGESTION 0x08
u_int8_t failure_code;
#define I2O_FAILURE_CODE_TRANSPORT_SERVICE_SUSPENDED 0x81
#define I2O_FAILURE_CODE_TRANSPORT_SERVICE_TERMINATED 0x82
#define I2O_FAILURE_CODE_TRANSPORT_CONGESTION 0x83
#define I2O_FAILURE_CODE_TRANSPORT_FAIL 0x84
#define I2O_FAILURE_CODE_TRANSPORT_STATE_ERROR 0x85
#define I2O_FAILURE_CODE_TRANSPORT_TIME_OUT 0x86
#define I2O_FAILURE_CODE_TRANSPORT_ROUTING_FAILURE 0x87
#define I2O_FAILURE_CODE_TRANSPORT_INVALID_VERSION 0x88
#define I2O_FAILURE_CODE_TRANSPORT_INVALID_OFFSET 0x89
#define I2O_FAILURE_CODE_TRANSPORT_INVALID_MSG_FLAGS 0x8A
#define I2O_FAILURE_CODE_TRANSPORT_FRAME_TOO_SMALL 0x8B
#define I2O_FAILURE_CODE_TRANSPORT_FRAME_TOO_LARGE 0x8C
#define I2O_FAILURE_CODE_TRANSPORT_INVALID_TARGET_ID 0x8D
#define I2O_FAILURE_CODE_TRANSPORT_INVALID_INITIATOR_ID 0x8E
#define I2O_FAILURE_CODE_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F
#define I2O_FAILURE_CODE_TRANSPORT_UNKNOWN_FAILURE 0xFF
u_int32_t failing_iop_id:12;
u_int32_t reserved:4;
u_int32_t failing_host_unit_id:16;
u_int32_t age_limit;
u_int64_t preserved_mfa;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_exec_iop_reset_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int8_t reserved[16];
u_int32_t status_word_low_addr;
u_int32_t status_word_high_addr;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_exec_status_get_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int8_t reserved[16];
u_int32_t reply_buf_low_addr;
u_int32_t reply_buf_high_addr;
u_int32_t reply_buf_length;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_status_get_reply {
u_int16_t organization_id;
u_int16_t reserved;
u_int32_t iop_id:12;
u_int32_t reserved1:4;
u_int32_t host_unit_id:16;
u_int32_t segment_number:12;
u_int32_t i2o_version:4;
u_int32_t iop_state:8;
#define I2O_IOP_STATE_INITIALIZING 0x01
#define I2O_IOP_STATE_RESET 0x02
#define I2O_IOP_STATE_HOLD 0x04
#define I2O_IOP_STATE_READY 0x05
#define I2O_IOP_STATE_OPERATIONAL 0x08
#define I2O_IOP_STATE_FAILED 0x10
#define I2O_IOP_STATE_FAULTED 0x11
u_int32_t messenger_type:8;
u_int16_t inbound_mframe_size;
u_int8_t init_code;
u_int8_t reserved2;
u_int32_t max_inbound_mframes;
u_int32_t current_ibound_mframes;
u_int32_t max_outbound_mframes;
u_int8_t product_idstring[24];
u_int32_t expected_lct_size;
u_int32_t iop_capabilities;
u_int32_t desired_private_memsize;
u_int32_t current_private_memsize;
u_int32_t current_private_membase;
u_int32_t desired_private_iosize;
u_int32_t current_private_iosize;
u_int32_t current_private_iobase;
u_int8_t reserved3[3];
u_int8_t sync_byte;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_exec_init_outqueue_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t host_pagesize;
u_int8_t init_code;
u_int8_t reserved;
u_int16_t queue_framesize;
struct i2o_sgl sgl[2];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
#define I2O_EXEC_OUTBOUND_INIT_IN_PROGRESS 0x01
#define I2O_EXEC_OUTBOUND_INIT_REJECTED 0x02
#define I2O_EXEC_OUTBOUND_INIT_FAILED 0x03
#define I2O_EXEC_OUTBOUND_INIT_COMPLETE 0x04
struct i2o_exec_systab_set_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t iop_id:12;
#define I2O_EXEC_SYS_TAB_IOP_ID_LOCAL_IOP 0x000
#define I2O_EXEC_SYS_TAB_IOP_ID_LOCAL_HOST 0x001
#define I2O_EXEC_SYS_TAB_IOP_ID_UNKNOWN_IOP 0xfff
u_int32_t reserved1:4;
u_int32_t host_unit_id:16;
#define I2O_EXEC_SYS_TAB_HOST_UNIT_ID_LOCAL_UNIT 0x0000
#define I2O_EXEC_SYS_TAB_HOST_UNIT_ID_UNKNOWN_UNIT 0xffff
u_int32_t segment_number:12;
#define I2O_EXEC_SYS_TAB_SEG_NUMBER_LOCAL_SEGMENT 0x000
#define I2O_EXEC_SYS_TAB_SEG_NUMBER_UNKNOWN_SEGMENT 0xfff
u_int32_t reserved2:4;
u_int32_t reserved3:8;
struct i2o_sgl sgl[3];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_exec_systab {
u_int8_t entries;
u_int8_t version;
#define I2O_RESOURCE_MANAGER_VERSION 0
u_int16_t reserved1;
u_int32_t change_id;
u_int64_t reserved2;
u_int16_t organization_id;
u_int16_t reserved3;
u_int32_t iop_id:12;
u_int32_t reserved4:20;
u_int32_t segment_number:12;
u_int32_t i2o_version:4;
u_int32_t iop_state:8;
u_int32_t messenger_type:8;
u_int16_t inbound_mframe_size;
u_int16_t reserved5;
u_int32_t last_changed;
u_int32_t iop_capabilities;
u_int64_t messenger_info;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_exec_get_lct_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t class;
u_int32_t last_change_id;
struct i2o_sgl sgl;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
#define I2O_TID_IOP 0x000
#define I2O_TID_HOST 0x001
#define I2O_TID_NONE 0xfff
struct i2o_lct_entry {
u_int32_t entry_size:16;
u_int32_t local_tid:12;
u_int32_t reserved:4;
u_int32_t change_id;
u_int32_t device_flags;
u_int32_t class:12;
#define I2O_CLASS_EXECUTIVE 0x000
#define I2O_CLASS_DDM 0x001
#define I2O_CLASS_RANDOM_BLOCK_STORAGE 0x010
#define I2O_CLASS_SEQUENTIAL_STORAGE 0x011
#define I2O_CLASS_LAN 0x020
#define I2O_CLASS_WAN 0x030
#define I2O_CLASS_FIBRE_CHANNEL_PORT 0x040
#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL 0x041
#define I2O_CLASS_SCSI_PERIPHERAL 0x051
#define I2O_CLASS_ATE_PORT 0x060
#define I2O_CLASS_ATE_PERIPHERAL 0x061
#define I2O_CLASS_FLOPPY_CONTROLLER 0x070
#define I2O_CLASS_FLOPPY_DEVICE 0x071
#define I2O_CLASS_BUS_ADAPTER_PORT 0x080
#define I2O_CLASS_MATCH_ANYCLASS 0xffffffff
u_int32_t class_version:4;
u_int32_t class_org:16;
u_int32_t sub_class;
#define I2O_SUBCLASS_i960 0x001
#define I2O_SUBCLASS_HDM 0x020
#define I2O_SUBCLASS_ISM 0x021
u_int32_t user_tid:12;
u_int32_t parent_tid:12;
u_int32_t bios_info:8;
u_int8_t identity_tag[8];
u_int32_t event_capabilities;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
#define I2O_LCT_ENTRYSIZE (sizeof(struct i2o_lct_entry)/sizeof(u_int32_t))
struct i2o_get_lct_reply {
u_int32_t table_size:16;
u_int32_t boot_device:12;
u_int32_t lct_version:4;
u_int32_t iop_flags;
u_int32_t current_change_id;
struct i2o_lct_entry entry[1];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_util_get_param_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t operation_flags;
struct i2o_sgl sgl[2];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_get_param_template {
u_int16_t operation;
#define I2O_PARAMS_OPERATION_FIELD_GET 0x0001
#define I2O_PARAMS_OPERATION_LIST_GET 0x0002
#define I2O_PARAMS_OPERATION_MORE_GET 0x0003
#define I2O_PARAMS_OPERATION_SIZE_GET 0x0004
#define I2O_PARAMS_OPERATION_TABLE_GET 0x0005
#define I2O_PARAMS_OPERATION_FIELD_SET 0x0006
#define I2O_PARAMS_OPERATION_LIST_SET 0x0007
#define I2O_PARAMS_OPERATION_ROW_ADD 0x0008
#define I2O_PARAMS_OPERATION_ROW_DELETE 0x0009
#define I2O_PARAMS_OPERATION_TABLE_CLEAR 0x000A
u_int16_t group;
#define I2O_BSA_DEVICE_INFO_GROUP_NO 0x0000
#define I2O_BSA_OPERATIONAL_CONTROL_GROUP_NO 0x0001
#define I2O_BSA_POWER_CONTROL_GROUP_NO 0x0002
#define I2O_BSA_CACHE_CONTROL_GROUP_NO 0x0003
#define I2O_BSA_MEDIA_INFO_GROUP_NO 0x0004
#define I2O_BSA_ERROR_LOG_GROUP_NO 0x0005
#define I2O_UTIL_PARAMS_DESCRIPTOR_GROUP_NO 0xF000
#define I2O_UTIL_PHYSICAL_DEVICE_TABLE_GROUP_NO 0xF001
#define I2O_UTIL_CLAIMED_TABLE_GROUP_NO 0xF002
#define I2O_UTIL_USER_TABLE_GROUP_NO 0xF003
#define I2O_UTIL_PRIVATE_MESSAGE_EXTENSIONS_GROUP_NO 0xF005
#define I2O_UTIL_AUTHORIZED_USER_TABLE_GROUP_NO 0xF006
#define I2O_UTIL_DEVICE_IDENTITY_GROUP_NO 0xF100
#define I2O_UTIL_DDM_IDENTITY_GROUP_NO 0xF101
#define I2O_UTIL_USER_INFORMATION_GROUP_NO 0xF102
#define I2O_UTIL_SGL_OPERATING_LIMITS_GROUP_NO 0xF103
#define I2O_UTIL_SENSORS_GROUP_NO 0xF200
u_int16_t field_count;
u_int16_t pad;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_get_param_operation {
u_int16_t operation_count;
u_int16_t reserved;
struct i2o_get_param_template operation[1];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_get_param_reply {
u_int16_t result_count;;
u_int16_t reserved;
u_int16_t block_size;
u_int8_t block_status;
u_int8_t error_info_size;
u_int32_t result[1];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_device_identity {
u_int32_t class;
u_int16_t owner;
u_int16_t parent;
u_int8_t vendor[16];
u_int8_t product[16];
u_int8_t description[16];
u_int8_t revision[8];
u_int8_t sn_format;
u_int8_t serial[256];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_bsa_device {
u_int8_t device_type;
u_int8_t path_count;
u_int16_t power_state;
u_int32_t block_size;
u_int64_t capacity;
u_int32_t capabilities;
u_int32_t state;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_util_claim_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int16_t claim_flags;
u_int8_t reserved;
u_int8_t claim_type;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_util_event_register_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t event_mask;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_util_event_reply_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t event_mask;
u_int32_t event_data[1];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_util_config_dialog_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int32_t page_number;
struct i2o_sgl sgl[2];
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_bsa_rw_block_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int16_t control_flags;
u_int8_t time_multiplier;
u_int8_t fetch_ahead;
u_int32_t bytecount;
u_int64_t lba;
struct i2o_sgl sgl;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
struct i2o_bsa_cache_flush_message {
u_int8_t version_offset;
u_int8_t message_flags;
u_int16_t message_size;
u_int32_t target_address:12;
u_int32_t initiator_address:12;
u_int32_t function:8;
u_int32_t initiator_context;
u_int32_t transaction_context;
u_int16_t control_flags;
u_int8_t time_multiplier;
u_int8_t reserved;
use __packed.
2002-09-23 18:54:32 +00:00
} __packed;
Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID controller. Some testing has already been done, but its still greenish. RAID's has to be setup via the BIOS on the SuperTrak, but all RAID types are supported by the driver. The SuperTrak rebuilds failed arrays on the fly and supports spare disks etc etc... Add "device pst" to your config file to use. As usual bugsreports, suggestions etc are welcome... Development sponsored by: Advanis Hardware donated by: Promise Inc.
2002-07-31 18:26:30 +00:00
/* prototypes */
int iop_init(struct iop_softc *);
void iop_attach(struct iop_softc *);
void iop_intr(void *);
int iop_reset(struct iop_softc *);
int iop_init_outqueue(struct iop_softc *);
int iop_get_lct(struct iop_softc *);
struct i2o_get_param_reply *iop_get_util_params(struct iop_softc *,int,int,int);
u_int32_t iop_get_mfa(struct iop_softc *);
void iop_free_mfa(struct iop_softc *, int);
int iop_queue_wait_msg(struct iop_softc *, int, struct i2o_basic_message *);
int iop_create_sgl(struct i2o_basic_message *, caddr_t, int, int);
/* global prototypes */
int pst_add_raid(struct iop_softc *, struct i2o_lct_entry *);
Reference in New Issue Copy Permalink