d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2f28bf307c
freebsd-dev/sys/dev/puc/pucdata.c

1217 lines
29 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* Copyright (c) 2006 Marcel Moolenaar
* All rights reserved.
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
*
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* PCI "universal" communications card driver configuration data (used to
* match/attach the cards).
*/
#include <sys/param.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <machine/resource.h>
Need machine/bus.h here too
2006-06-12 19:22:44 +00:00
#include <machine/bus.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <sys/rman.h>
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
#include <dev/pci/pcivar.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <dev/puc/puc_bus.h>
#include <dev/puc/puc_cfg.h>
Fix building with GCC 4.2: ensure types are defined before refering to them.
2006-06-29 16:27:19 +00:00
#include <dev/puc/puc_bfe.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
static puc_config_f puc_config_amc;
static puc_config_f puc_config_cronyx;
static puc_config_f puc_config_diva;
static puc_config_f puc_config_icbook;
static puc_config_f puc_config_quatech;
static puc_config_f puc_config_syba;
static puc_config_f puc_config_siig;
static puc_config_f puc_config_timedia;
static puc_config_f puc_config_titan;
const struct puc_cfg puc_pci_devices[] = {
{ 0x0009, 0x7168, 0xffff, 0,
"Sunix SUN1889",
DEFAULT_RCLK * 8,
PUC_PORT_2S, 0x10, 0, 8,
},
{ 0x103c, 0x1048, 0x103c, 0x1049,
"HP Diva Serial [GSP] Multiport UART - Tosca Console",
DEFAULT_RCLK,
PUC_PORT_3S, 0x10, 0, -1,
.config_function = puc_config_diva
},
{ 0x103c, 0x1048, 0x103c, 0x104a,
"HP Diva Serial [GSP] Multiport UART - Tosca Secondary",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 0, -1,
.config_function = puc_config_diva
},
{ 0x103c, 0x1048, 0x103c, 0x104b,
"HP Diva Serial [GSP] Multiport UART - Maestro SP2",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 0, -1,
.config_function = puc_config_diva
},
{ 0x103c, 0x1048, 0x103c, 0x1223,
"HP Diva Serial [GSP] Multiport UART - Superdome Console",
DEFAULT_RCLK,
PUC_PORT_3S, 0x10, 0, -1,
.config_function = puc_config_diva
},
{ 0x103c, 0x1048, 0x103c, 0x1226,
"HP Diva Serial [GSP] Multiport UART - Keystone SP2",
DEFAULT_RCLK,
PUC_PORT_3S, 0x10, 0, -1,
.config_function = puc_config_diva
},
{ 0x103c, 0x1048, 0x103c, 0x1282,
"HP Diva Serial [GSP] Multiport UART - Everest SP2",
DEFAULT_RCLK,
PUC_PORT_3S, 0x10, 0, -1,
.config_function = puc_config_diva
},
{ 0x10b5, 0x1076, 0x10b5, 0x1076,
"VScom PCI-800",
DEFAULT_RCLK * 8,
PUC_PORT_8S, 0x18, 0, 8,
},
{ 0x10b5, 0x1077, 0x10b5, 0x1077,
"VScom PCI-400",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x18, 0, 8,
},
{ 0x10b5, 0x1103, 0x10b5, 0x1103,
"VScom PCI-200",
DEFAULT_RCLK * 8,
PUC_PORT_2S, 0x18, 4, 0,
Support the Comtrol RocketPort 550 PCi 16 (used with RocketPort I/F box). Sponsored by: Feral Software
2002-06-18 02:39:12 +00:00
},
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/*
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* Boca Research Turbo Serial 658 (8 serial port) card.
* Appears to be the same as Chase Research PLC PCI-FAST8
* and Perle PCI-FAST8 Multi-Port serial cards.
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
*/
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x10b5, 0x9050, 0x12e0, 0x0021,
"Boca Research Turbo Serial 658",
DEFAULT_RCLK * 4,
PUC_PORT_8S, 0x18, 0, 8,
},
{ 0x10b5, 0x9050, 0x12e0, 0x0031,
"Boca Research Turbo Serial 654",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x18, 0, 8,
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/*
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
* into the subsystem fields, and claims that it's a
* network/misc (0x02/0x80) device.
*/
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x10b5, 0x9050, 0xd84d, 0x6808,
"Dolphin Peripherals 4035",
DEFAULT_RCLK,
PUC_PORT_2S, 0x18, 4, 0,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
},
/*
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
* into the subsystem fields, and claims that it's a
* network/misc (0x02/0x80) device.
*/
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x10b5, 0x9050, 0xd84d, 0x6810,
"Dolphin Peripherals 4014",
0,
PUC_PORT_2P, 0x20, 4, 0,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x10e8, 0x818e, 0xffff, 0,
"Applied Micro Circuits 8 Port UART",
DEFAULT_RCLK,
PUC_PORT_8S, 0x14, -1, -1,
.config_function = puc_config_amc
},
{ 0x11fe, 0x8010, 0xffff, 0,
"Comtrol RocketPort 550/8 RJ11 part A",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x11fe, 0x8011, 0xffff, 0,
"Comtrol RocketPort 550/8 RJ11 part B",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x11fe, 0x8012, 0xffff, 0,
"Comtrol RocketPort 550/8 Octa part A",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x11fe, 0x8013, 0xffff, 0,
"Comtrol RocketPort 550/8 Octa part B",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x11fe, 0x8014, 0xffff, 0,
"Comtrol RocketPort 550/4 RJ45",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x11fe, 0x8015, 0xffff, 0,
"Comtrol RocketPort 550/Quad",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x11fe, 0x8016, 0xffff, 0,
"Comtrol RocketPort 550/16 part A",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x11fe, 0x8017, 0xffff, 0,
"Comtrol RocketPort 550/16 part B",
DEFAULT_RCLK * 4,
PUC_PORT_12S, 0x10, 0, 8,
},
{ 0x11fe, 0x8018, 0xffff, 0,
"Comtrol RocketPort 550/8 part A",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x11fe, 0x8019, 0xffff, 0,
"Comtrol RocketPort 550/8 part B",
DEFAULT_RCLK * 4,
PUC_PORT_4S, 0x10, 0, 8,
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Add support for the four PUC serial interfaces found on IBM SurePOS 300 series POS terminals. MFC after: 3 days Submitted by: Marc Balmer <marc at msys.ch>
2009-06-02 09:58:17 +00:00
/*
* IBM SurePOS 300 Series (481033H) serial ports
* Details can be found on the IBM RSS websites
*/
{ 0x1014, 0x0297, 0xffff, 0,
"IBM SurePOS 300 Series (481033H) serial ports",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/*
* SIIG Boards.
*
* SIIG provides documentation for their boards at:
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* <URL:http://www.siig.com/downloads.asp>
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
*/
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1010, 0xffff, 0,
"SIIG Cyber I/O PCI 16C550 (10x family)",
DEFAULT_RCLK,
PUC_PORT_1S1P, 0x18, 4, 0,
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1011, 0xffff, 0,
"SIIG Cyber I/O PCI 16C650 (10x family)",
DEFAULT_RCLK,
PUC_PORT_1S1P, 0x18, 4, 0,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1012, 0xffff, 0,
"SIIG Cyber I/O PCI 16C850 (10x family)",
DEFAULT_RCLK,
PUC_PORT_1S1P, 0x18, 4, 0,
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1021, 0xffff, 0,
"SIIG Cyber Parallel Dual PCI (10x family)",
0,
PUC_PORT_2P, 0x18, 8, 0,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1030, 0xffff, 0,
"SIIG Cyber Serial Dual PCI 16C550 (10x family)",
DEFAULT_RCLK,
PUC_PORT_2S, 0x18, 4, 0,
Support the Titan VScom PCI-200HV2 2 port serial card. MFC after: 3 days
2003-08-02 13:25:31 +00:00
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1031, 0xffff, 0,
"SIIG Cyber Serial Dual PCI 16C650 (10x family)",
DEFAULT_RCLK,
PUC_PORT_2S, 0x18, 4, 0,
Add an entry for the VScom (Titan?) PCI-800L 8-port serial multiport card. Thanks to bde for his help in configuring the undocumented bars in this driver... MFC after: 1 month
2003-09-19 19:55:08 +00:00
},
Support the Titan VScom PCI-200HV2 2 port serial card. MFC after: 3 days
2003-08-02 13:25:31 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x131f, 0x1032, 0xffff, 0,
"SIIG Cyber Serial Dual PCI 16C850 (10x family)",
DEFAULT_RCLK,
PUC_PORT_2S, 0x18, 4, 0,
},
{ 0x131f, 0x1034, 0xffff, 0, /* XXX really? */
"SIIG Cyber 2S1P PCI 16C550 (10x family)",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x18, 4, 0,
},
{ 0x131f, 0x1035, 0xffff, 0, /* XXX really? */
"SIIG Cyber 2S1P PCI 16C650 (10x family)",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x18, 4, 0,
},
{ 0x131f, 0x1036, 0xffff, 0, /* XXX really? */
"SIIG Cyber 2S1P PCI 16C850 (10x family)",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x18, 4, 0,
},
{ 0x131f, 0x1050, 0xffff, 0,
"SIIG Cyber 4S PCI 16C550 (10x family)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x18, 4, 0,
},
{ 0x131f, 0x1051, 0xffff, 0,
"SIIG Cyber 4S PCI 16C650 (10x family)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x18, 4, 0,
},
{ 0x131f, 0x1052, 0xffff, 0,
"SIIG Cyber 4S PCI 16C850 (10x family)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x18, 4, 0,
},
{ 0x131f, 0x2010, 0xffff, 0,
"SIIG Cyber I/O PCI 16C550 (20x family)",
DEFAULT_RCLK,
PUC_PORT_1S1P, 0x10, 4, 0,
},
{ 0x131f, 0x2011, 0xffff, 0,
"SIIG Cyber I/O PCI 16C650 (20x family)",
DEFAULT_RCLK,
PUC_PORT_1S1P, 0x10, 4, 0,
},
{ 0x131f, 0x2012, 0xffff, 0,
"SIIG Cyber I/O PCI 16C850 (20x family)",
DEFAULT_RCLK,
PUC_PORT_1S1P, 0x10, 4, 0,
},
{ 0x131f, 0x2021, 0xffff, 0,
"SIIG Cyber Parallel Dual PCI (20x family)",
0,
PUC_PORT_2P, 0x10, 8, 0,
},
{ 0x131f, 0x2030, 0xffff, 0,
"SIIG Cyber Serial Dual PCI 16C550 (20x family)",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x131f, 0x2031, 0xffff, 0,
"SIIG Cyber Serial Dual PCI 16C650 (20x family)",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x131f, 0x2032, 0xffff, 0,
"SIIG Cyber Serial Dual PCI 16C850 (20x family)",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x131f, 0x2040, 0xffff, 0,
"SIIG Cyber 2P1S PCI 16C550 (20x family)",
DEFAULT_RCLK,
PUC_PORT_1S2P, 0x10, -1, 0,
.config_function = puc_config_siig
},
{ 0x131f, 0x2041, 0xffff, 0,
"SIIG Cyber 2P1S PCI 16C650 (20x family)",
DEFAULT_RCLK,
PUC_PORT_1S2P, 0x10, -1, 0,
.config_function = puc_config_siig
},
{ 0x131f, 0x2042, 0xffff, 0,
"SIIG Cyber 2P1S PCI 16C850 (20x family)",
DEFAULT_RCLK,
PUC_PORT_1S2P, 0x10, -1, 0,
.config_function = puc_config_siig
},
{ 0x131f, 0x2050, 0xffff, 0,
"SIIG Cyber 4S PCI 16C550 (20x family)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
},
{ 0x131f, 0x2051, 0xffff, 0,
"SIIG Cyber 4S PCI 16C650 (20x family)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
},
{ 0x131f, 0x2052, 0xffff, 0,
"SIIG Cyber 4S PCI 16C850 (20x family)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
},
{ 0x131f, 0x2060, 0xffff, 0,
"SIIG Cyber 2S1P PCI 16C550 (20x family)",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x10, 4, 0,
},
{ 0x131f, 0x2061, 0xffff, 0,
"SIIG Cyber 2S1P PCI 16C650 (20x family)",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x10, 4, 0,
},
{ 0x131f, 0x2062, 0xffff, 0,
"SIIG Cyber 2S1P PCI 16C850 (20x family)",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x10, 4, 0,
},
{ 0x131f, 0x2081, 0xffff, 0,
"SIIG PS8000 8S PCI 16C650 (20x family)",
DEFAULT_RCLK,
PUC_PORT_8S, 0x10, -1, -1,
.config_function = puc_config_siig
},
{ 0x135c, 0x0010, 0xffff, 0,
"Quatech QSC-100",
-3, /* max 8x clock rate */
PUC_PORT_4S, 0x14, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0020, 0xffff, 0,
"Quatech DSC-100",
-1, /* max 2x clock rate */
PUC_PORT_2S, 0x14, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0030, 0xffff, 0,
"Quatech DSC-200/300",
-1, /* max 2x clock rate */
PUC_PORT_2S, 0x14, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0040, 0xffff, 0,
"Quatech QSC-200/300",
-3, /* max 8x clock rate */
PUC_PORT_4S, 0x14, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0050, 0xffff, 0,
"Quatech ESC-100D",
-3, /* max 8x clock rate */
PUC_PORT_8S, 0x14, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0060, 0xffff, 0,
"Quatech ESC-100M",
-3, /* max 8x clock rate */
PUC_PORT_8S, 0x14, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0170, 0xffff, 0,
"Quatech QSCLP-100",
-1, /* max 2x clock rate */
PUC_PORT_4S, 0x18, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x0180, 0xffff, 0,
"Quatech DSCLP-100",
-1, /* max 3x clock rate */
PUC_PORT_2S, 0x18, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x01b0, 0xffff, 0,
"Quatech DSCLP-200/300",
-1, /* max 2x clock rate */
PUC_PORT_2S, 0x18, 0, 8,
.config_function = puc_config_quatech
},
{ 0x135c, 0x01e0, 0xffff, 0,
"Quatech ESCLP-100",
-3, /* max 8x clock rate */
PUC_PORT_8S, 0x10, 0, 8,
.config_function = puc_config_quatech
},
{ 0x1393, 0x1040, 0xffff, 0,
"Moxa Technologies, Smartio C104H/PCI",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x18, 0, 8,
},
{ 0x1393, 0x1041, 0xffff, 0,
"Moxa Technologies, Smartio CP-104UL/PCI",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x18, 0, 8,
},
o Add Moxa Technologies CP-104EL PCI Express 4 port Serial card. PR: kern/119515 Submitted by: Gavin Stone-Tolcher MFC after: 1 month
2008-01-12 19:14:29 +00:00
{ 0x1393, 0x1043, 0xffff, 0,
"Moxa Technologies, Smartio CP-104EL/PCIe",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x18, 0, 8,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x1393, 0x1141, 0xffff, 0,
"Moxa Technologies, Industio CP-114",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x18, 0, 8,
},
{ 0x1393, 0x1680, 0xffff, 0,
"Moxa Technologies, C168H/PCI",
DEFAULT_RCLK * 8,
PUC_PORT_8S, 0x18, 0, 8,
},
{ 0x1393, 0x1681, 0xffff, 0,
"Moxa Technologies, C168U/PCI",
DEFAULT_RCLK * 8,
PUC_PORT_8S, 0x18, 0, 8,
},
- Add support for Moxa Technologies CP-168EL/PCIe card. Submitted by: dmarck MFC after: 1 week
2009-01-27 09:38:44 +00:00
{ 0x1393, 0x1682, 0xffff, 0,
"Moxa Technologies, CP-168EL/PCIe",
DEFAULT_RCLK * 8,
PUC_PORT_8S, 0x18, 0, 8,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x13a8, 0x0158, 0xffff, 0,
"Cronyx Omega2-PCI",
DEFAULT_RCLK * 8,
PUC_PORT_8S, 0x10, 0, -1,
.config_function = puc_config_cronyx
},
{ 0x1407, 0x0100, 0xffff, 0,
"Lava Computers Dual Serial",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x1407, 0x0101, 0xffff, 0,
"Lava Computers Quatro A",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x1407, 0x0102, 0xffff, 0,
"Lava Computers Quatro B",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x1407, 0x0120, 0xffff, 0,
"Lava Computers Quattro-PCI A",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x1407, 0x0121, 0xffff, 0,
"Lava Computers Quattro-PCI B",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x1407, 0x0180, 0xffff, 0,
"Lava Computers Octo A",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
},
{ 0x1407, 0x0181, 0xffff, 0,
"Lava Computers Octo B",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
},
Add support for the Sunix SUN1889-based dual parallel port card. PR: kern/128219 Submitted by: Thinker K.F. Li <thinker at branda dot to>
2009-02-12 10:39:19 +00:00
{ 0x1409, 0x7268, 0xffff, 0,
"Sunix SUN1888",
0,
PUC_PORT_2P, 0x10, 0, 8,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x1409, 0x7168, 0xffff, 0,
NULL,
DEFAULT_RCLK * 8,
PUC_PORT_NONSTANDARD, 0x10, -1, -1,
.config_function = puc_config_timedia
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
},
/*
* Boards with an Oxford Semiconductor chip.
*
* Oxford Semiconductor provides documentation for their chip at:
* <URL:http://www.oxsemi.com/products/uarts/index.html>
*
* As sold by Kouwell <URL:http://www.kouwell.com/>.
* I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports.
*/
Add an entry for the "SIIG Cyber 4 PCI 16550", which is a four-port card based on the OX16PCI954 chip with a non-standard clock. MFC after: 3 days
2008-10-25 10:55:49 +00:00
{ 0x1415, 0x9501, 0x131f, 0x2050,
"SIIG Cyber 4 PCI 16550",
DEFAULT_RCLK * 10,
PUC_PORT_4S, 0x10, 0, 8,
},
Add SIIG 4 port serial card based on the Oxford OX16PCI954.
2006-09-04 18:27:14 +00:00
{ 0x1415, 0x9501, 0x131f, 0x2051,
"SIIG Cyber 4S PCI 16C650 (20x family)",
DEFAULT_RCLK * 10,
PUC_PORT_4S, 0x10, 0, 8,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x1415, 0x9501, 0xffff, 0,
Revert r179409; it breaks all OX16PCI954-based cards except the SIIG 4. MFC after: 3 days
2008-10-13 12:28:33 +00:00
"Oxford Semiconductor OX16PCI954 UARTs",
DEFAULT_RCLK,
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
PUC_PORT_4S, 0x10, 0, 8,
Add in a missing device entry that I thought was already in there. This is from the same PR. Prompted by the reporter of the PR. PR: 38372
2003-08-21 03:54:20 +00:00
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x1415, 0x950a, 0xffff, 0,
Revert r179409; it breaks all OX16PCI954-based cards except the SIIG 4. MFC after: 3 days
2008-10-13 12:28:33 +00:00
"Oxford Semiconductor OX16PCI954 UARTs",
DEFAULT_RCLK,
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
PUC_PORT_4S, 0x10, 0, 8,
},
add support for NetMos NM9805 1284 Printer port Submitted by: Willy Offermans <W.K.Offermans@TUe.nl> MFC after: 2 weeks
2005-02-09 18:38:28 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x1415, 0x9511, 0xffff, 0,
"Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x1415, 0x9521, 0xffff, 0,
"Oxford Semiconductor OX16PCI952 UARTs",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
Add support for the Oxford OX16PCI958-based card. Note, that the patch provided with this card for the Linux states that the card uses DEFAULT_RCLK * 2, while in fact it is '* 10'. So probably we should also use the subdevice/subvendord here. For now just ignore that fact. PR: kern/129665 Submitted by: bsam Obtained from: united efforst with bsam
2008-12-27 15:22:22 +00:00
{ 0x1415, 0x9538, 0xffff, 0,
"Oxford Semiconductor OX16PCI958 UARTs",
DEFAULT_RCLK * 10,
PUC_PORT_8S, 0x18, 0, 8,
},
Add the VScom PCI-100L card. PR: kern/72352 Submitted by: Thomas Nystrom
2008-08-22 00:12:08 +00:00
{ 0x14d2, 0x8010, 0xffff, 0,
"VScom PCI-100L",
DEFAULT_RCLK * 8,
PUC_PORT_1S, 0x14, 0, 0,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x14d2, 0x8020, 0xffff, 0,
"VScom PCI-200L",
DEFAULT_RCLK * 8,
PUC_PORT_2S, 0x14, 4, 0,
},
{ 0x14d2, 0x8028, 0xffff, 0,
"VScom 200Li",
DEFAULT_RCLK,
PUC_PORT_2S, 0x20, 0, 8,
Add description of Cronyx Omega2-PCI (8x port serial adapter).
2004-05-17 12:57:30 +00:00
},
Add support for Chase/Perle PCI FAST-4 4 port serial cards which appear to be the same as Boca Research Turbo Serial 654 (4 serial port). While add the 8 port variants as well. Submitted by: sten@blinkenlights.nl PR: kern/75793 MFC after: 1 week
2005-01-05 20:06:04 +00:00
/*
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* VScom (Titan?) PCI-800L. More modern variant of the
* PCI-800. Uses 6 discrete 16550 UARTs, plus another
* two of them obviously implemented as macro cells in
* the ASIC. This causes the weird port access pattern
* below, where two of the IO port ranges each access
* one of the ASIC UARTs, and a block of IO addresses
* access the external UARTs.
Add support for Chase/Perle PCI FAST-4 4 port serial cards which appear to be the same as Boca Research Turbo Serial 654 (4 serial port). While add the 8 port variants as well. Submitted by: sten@blinkenlights.nl PR: kern/75793 MFC after: 1 week
2005-01-05 20:06:04 +00:00
*/
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x14d2, 0x8080, 0xffff, 0,
"Titan VScom PCI-800L",
DEFAULT_RCLK * 8,
PUC_PORT_8S, 0x14, -1, -1,
.config_function = puc_config_titan
Add support for Chase/Perle PCI FAST-4 4 port serial cards which appear to be the same as Boca Research Turbo Serial 654 (4 serial port). While add the 8 port variants as well. Submitted by: sten@blinkenlights.nl PR: kern/75793 MFC after: 1 week
2005-01-05 20:06:04 +00:00
},
/*
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers
* 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has
* device ID 3 and PCI device 1 device ID 4.
Add support for Chase/Perle PCI FAST-4 4 port serial cards which appear to be the same as Boca Research Turbo Serial 654 (4 serial port). While add the 8 port variants as well. Submitted by: sten@blinkenlights.nl PR: kern/75793 MFC after: 1 week
2005-01-05 20:06:04 +00:00
*/
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x14d2, 0xa003, 0xffff, 0,
"Titan PCI-800H",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x14d2, 0xa004, 0xffff, 0,
"Titan PCI-800H",
DEFAULT_RCLK * 8,
PUC_PORT_4S, 0x10, 0, 8,
},
{ 0x14d2, 0xa005, 0xffff, 0,
"Titan PCI-200H",
DEFAULT_RCLK * 8,
PUC_PORT_2S, 0x10, 0, 8,
},
{ 0x14d2, 0xe020, 0xffff, 0,
"Titan VScom PCI-200HV2",
DEFAULT_RCLK * 8,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x14db, 0x2130, 0xffff, 0,
"Avlab Technology, PCI IO 2S",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
{ 0x14db, 0x2150, 0xffff, 0,
"Avlab Low Profile PCI 4 Serial",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
Add yet another entry to the list.
2005-11-05 21:04:26 +00:00
},
Add PCI ID for Dell RAC IV/ERA Virtual UART (PowerEdge 1850). Trim name of existing Dell RAC devices. Trim comments. With help from: dpk at dpk dot net MFC after: 1 week
2005-01-27 01:17:32 +00:00
Add the Avlab Technology PCI IO 4S-850 4 port serial card. PR: kern/110797 Submitted by: Trevor Roydhouse
2008-08-21 23:22:32 +00:00
{ 0x14db, 0x2152, 0xffff, 0,
"Avlab Low Profile PCI 4 Serial",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 4, 0,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x1592, 0x0781, 0xffff, 0,
"Syba Tech Ltd. PCI-4S2P-550-ECP",
DEFAULT_RCLK,
PUC_PORT_4S1P, 0x10, 0, -1,
.config_function = puc_config_syba
},
{ 0x6666, 0x0001, 0xffff, 0,
"Decision Computer Inc, PCCOM 4-port serial",
DEFAULT_RCLK,
PUC_PORT_4S, 0x1c, 0, 8,
},
Add the Decision Computer Inc, PCCOM 8-port serial card. PR: kern/69730 Submitted by: Darrin Smith
2008-08-22 00:13:17 +00:00
{ 0x6666, 0x0002, 0xffff, 0,
"Decision Computer Inc, PCCOM 8-port serial",
DEFAULT_RCLK,
PUC_PORT_8S, 0x1c, 0, 8,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x6666, 0x0004, 0xffff, 0,
"PCCOM dual port RS232/422/485",
DEFAULT_RCLK,
PUC_PORT_2S, 0x1c, 0, 8,
},
{ 0x9710, 0x9815, 0xffff, 0,
"NetMos NM9815 Dual 1284 Printer port",
0,
PUC_PORT_2P, 0x10, 8, 0,
},
Add support for the single-port NetMos NM9835 serial adapter. The puc(4) entry is a specific entry to override the generic NetMos entry so that puc(4) will leave this device alone and let uart(4) claim it. Submitted by: Navdeep Parhar nparhar @ gmail Reviewed by: marcel MFC after: 1 week
2009-03-05 16:43:33 +00:00
/*
* This is more specific than the generic NM9835 entry that follows, and
* is placed here to _prevent_ puc from claiming this single port card.
*
* uart(4) will claim this device.
*/
{ 0x9710, 0x9835, 0x1000, 1,
"NetMos NM9835 based 1-port serial",
DEFAULT_RCLK,
PUC_PORT_1S, 0x10, 4, 0,
},
Make puc(4) aware of this 2 port serial card based on NetMos 9835: puc0@pci0:4:1:0: class=0x070002 card=0x00021000 chip=0x98359710 rev=0x01 hdr=0x00 Reviewed by: marcel@ Approved by: gnn (mentor)
2009-06-20 00:04:48 +00:00
{ 0x9710, 0x9835, 0x1000, 2,
"NetMos NM9835 based 2-port serial",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 4, 0,
},
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
{ 0x9710, 0x9835, 0xffff, 0,
"NetMos NM9835 Dual UART and 1284 Printer port",
DEFAULT_RCLK,
PUC_PORT_2S1P, 0x10, 4, 0,
},
{ 0x9710, 0x9845, 0x1000, 0x0006,
"NetMos NM9845 6 Port UART",
DEFAULT_RCLK,
PUC_PORT_6S, 0x10, 4, 0,
},
{ 0x9710, 0x9845, 0xffff, 0,
"NetMos NM9845 Quad UART and 1284 Printer port",
DEFAULT_RCLK,
PUC_PORT_4S1P, 0x10, 4, 0,
},
{ 0xb00c, 0x021c, 0xffff, 0,
"IC Book Labs Gunboat x4 Lite",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xb00c, 0x031c, 0xffff, 0,
"IC Book Labs Gunboat x4 Pro",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xb00c, 0x041c, 0xffff, 0,
"IC Book Labs Ironclad x8 Lite",
DEFAULT_RCLK,
PUC_PORT_8S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xb00c, 0x051c, 0xffff, 0,
"IC Book Labs Ironclad x8 Pro",
DEFAULT_RCLK,
PUC_PORT_8S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xb00c, 0x081c, 0xffff, 0,
"IC Book Labs Dreadnought x16 Pro",
DEFAULT_RCLK * 8,
PUC_PORT_16S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xb00c, 0x091c, 0xffff, 0,
"IC Book Labs Dreadnought x16 Lite",
DEFAULT_RCLK,
PUC_PORT_16S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xb00c, 0x0a1c, 0xffff, 0,
"IC Book Labs Gunboat x2 Low Profile",
DEFAULT_RCLK,
PUC_PORT_2S, 0x10, 0, 8,
},
{ 0xb00c, 0x0b1c, 0xffff, 0,
"IC Book Labs Gunboat x4 Low Profile",
DEFAULT_RCLK,
PUC_PORT_4S, 0x10, 0, 8,
.config_function = puc_config_icbook
},
{ 0xffff, 0, 0xffff, 0, NULL, 0 }
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
};
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
static int
puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
switch (cmd) {
case PUC_CFG_GET_OFS:
*res = 8 * (port & 1);
return (0);
case PUC_CFG_GET_RID:
*res = 0x14 + (port >> 1) * 4;
return (0);
default:
break;
}
return (ENXIO);
}
static int
puc_config_cronyx(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
if (cmd == PUC_CFG_GET_OFS) {
*res = port * 0x200;
return (0);
}
return (ENXIO);
}
static int
puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
const struct puc_cfg *cfg = sc->sc_cfg;
if (cmd == PUC_CFG_GET_OFS) {
if (cfg->subdevice == 0x1282) /* Everest SP */
port <<= 1;
else if (cfg->subdevice == 0x104b) /* Maestro SP2 */
port = (port == 3) ? 4 : port;
*res = port * 8 + ((port > 2) ? 0x18 : 0);
return (0);
}
return (ENXIO);
}
static int
puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
if (cmd == PUC_CFG_GET_ILR) {
*res = PUC_ILR_DIGI;
return (0);
}
return (ENXIO);
}
static int
puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
const struct puc_cfg *cfg = sc->sc_cfg;
struct puc_bar *bar;
uint8_t v0, v1;
switch (cmd) {
case PUC_CFG_SETUP:
/*
* Check if the scratchpad register is enabled or if the
* interrupt status and options registers are active.
*/
bar = puc_get_bar(sc, cfg->rid);
if (bar == NULL)
return (ENXIO);
/* Set DLAB in the LCR register of UART 0. */
bus_write_1(bar->b_res, 3, 0x80);
/* Write 0 to the SPR register of UART 0. */
bus_write_1(bar->b_res, 7, 0);
/* Read back the contents of the SPR register of UART 0. */
v0 = bus_read_1(bar->b_res, 7);
/* Write a specific value to the SPR register of UART 0. */
bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock);
/* Read back the contents of the SPR register of UART 0. */
v1 = bus_read_1(bar->b_res, 7);
/* Clear DLAB in the LCR register of UART 0. */
bus_write_1(bar->b_res, 3, 0);
/* Save the two values read-back from the SPR register. */
sc->sc_cfg_data = (v0 << 8) | v1;
if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
/*
* The SPR register echoed the two values written
* by us. This means that the SPAD jumper is set.
*/
device_printf(sc->sc_dev, "warning: extra features "
"not usable -- SPAD compatibility enabled\n");
return (0);
}
if (v0 != 0) {
/*
* The first value doesn't match. This can only mean
* that the SPAD jumper is not set and that a non-
* standard fixed clock multiplier jumper is set.
*/
if (bootverbose)
device_printf(sc->sc_dev, "fixed clock rate "
"multiplier of %d\n", 1 << v0);
if (v0 < -cfg->clock)
device_printf(sc->sc_dev, "warning: "
"suboptimal fixed clock rate multiplier "
"setting\n");
return (0);
}
/*
* The first value matched, but the second didn't. We know
* that the SPAD jumper is not set. We also know that the
* clock rate multiplier is software controlled *and* that
* we just programmed it to the maximum allowed.
*/
if (bootverbose)
device_printf(sc->sc_dev, "clock rate multiplier of "
"%d selected\n", 1 << -cfg->clock);
return (0);
case PUC_CFG_GET_CLOCK:
v0 = (sc->sc_cfg_data >> 8) & 0xff;
v1 = sc->sc_cfg_data & 0xff;
if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
/*
* XXX With the SPAD jumper applied, there's no
* easy way of knowing if there's also a clock
* rate multiplier jumper installed. Let's hope
* not...
*/
*res = DEFAULT_RCLK;
} else if (v0 == 0) {
/*
* No clock rate multiplier jumper installed,
* so we programmed the board with the maximum
* multiplier allowed as given to us in the
* clock field of the config record (negated).
*/
*res = DEFAULT_RCLK << -cfg->clock;
} else
*res = DEFAULT_RCLK << v0;
return (0);
case PUC_CFG_GET_ILR:
v0 = (sc->sc_cfg_data >> 8) & 0xff;
v1 = sc->sc_cfg_data & 0xff;
*res = (v0 == 0 && v1 == 0x80 + -cfg->clock)
? PUC_ILR_NONE : PUC_ILR_QUATECH;
return (0);
default:
break;
}
return (ENXIO);
}
static int
puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
static int base[] = { 0x251, 0x3f0, 0 };
const struct puc_cfg *cfg = sc->sc_cfg;
struct puc_bar *bar;
int efir, idx, ofs;
uint8_t v;
switch (cmd) {
case PUC_CFG_SETUP:
bar = puc_get_bar(sc, cfg->rid);
if (bar == NULL)
return (ENXIO);
/* configure both W83877TFs */
bus_write_1(bar->b_res, 0x250, 0x89);
bus_write_1(bar->b_res, 0x3f0, 0x87);
bus_write_1(bar->b_res, 0x3f0, 0x87);
idx = 0;
while (base[idx] != 0) {
efir = base[idx];
bus_write_1(bar->b_res, efir, 0x09);
v = bus_read_1(bar->b_res, efir + 1);
if ((v & 0x0f) != 0x0c)
return (ENXIO);
bus_write_1(bar->b_res, efir, 0x16);
v = bus_read_1(bar->b_res, efir + 1);
bus_write_1(bar->b_res, efir, 0x16);
bus_write_1(bar->b_res, efir + 1, v | 0x04);
bus_write_1(bar->b_res, efir, 0x16);
bus_write_1(bar->b_res, efir + 1, v & ~0x04);
ofs = base[idx] & 0x300;
bus_write_1(bar->b_res, efir, 0x23);
bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2);
bus_write_1(bar->b_res, efir, 0x24);
bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2);
bus_write_1(bar->b_res, efir, 0x25);
bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2);
bus_write_1(bar->b_res, efir, 0x17);
bus_write_1(bar->b_res, efir + 1, 0x03);
bus_write_1(bar->b_res, efir, 0x28);
bus_write_1(bar->b_res, efir + 1, 0x43);
idx++;
}
bus_write_1(bar->b_res, 0x250, 0xaa);
bus_write_1(bar->b_res, 0x3f0, 0xaa);
return (0);
case PUC_CFG_GET_OFS:
switch (port) {
case 0:
*res = 0x2f8;
return (0);
case 1:
*res = 0x2e8;
return (0);
case 2:
*res = 0x3f8;
return (0);
case 3:
*res = 0x3e8;
return (0);
case 4:
*res = 0x278;
return (0);
}
break;
default:
break;
}
return (ENXIO);
}
static int
puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
const struct puc_cfg *cfg = sc->sc_cfg;
switch (cmd) {
case PUC_CFG_GET_OFS:
if (cfg->ports == PUC_PORT_8S) {
*res = (port > 4) ? 8 * (port - 4) : 0;
return (0);
}
break;
case PUC_CFG_GET_RID:
if (cfg->ports == PUC_PORT_8S) {
*res = 0x10 + ((port > 4) ? 0x10 : 4 * port);
return (0);
}
if (cfg->ports == PUC_PORT_2S1P) {
switch (port) {
case 0: *res = 0x10; return (0);
case 1: *res = 0x14; return (0);
case 2: *res = 0x1c; return (0);
}
}
break;
default:
break;
}
return (ENXIO);
}
static int
puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
static uint16_t dual[] = {
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
0xD079, 0
};
static uint16_t quad[] = {
0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
0xB157, 0
};
static uint16_t octa[] = {
0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
};
static struct {
int ports;
uint16_t *ids;
} subdevs[] = {
{ 2, dual },
{ 4, quad },
{ 8, octa },
{ 0, NULL }
};
static char desc[64];
int dev, id;
uint16_t subdev;
switch (cmd) {
case PUC_CFG_GET_DESC:
snprintf(desc, sizeof(desc),
"Timedia technology %d Port Serial", (int)sc->sc_cfg_data);
*res = (intptr_t)desc;
return (0);
case PUC_CFG_GET_NPORTS:
subdev = pci_get_subdevice(sc->sc_dev);
dev = 0;
while (subdevs[dev].ports != 0) {
id = 0;
while (subdevs[dev].ids[id] != 0) {
if (subdev == subdevs[dev].ids[id]) {
sc->sc_cfg_data = subdevs[dev].ports;
*res = sc->sc_cfg_data;
return (0);
}
id++;
}
dev++;
}
return (ENXIO);
case PUC_CFG_GET_OFS:
*res = (port == 1 || port == 3) ? 8 : 0;
return (0);
case PUC_CFG_GET_RID:
Fix RID calculation. The RID is really the BAR for PCI cards, so the index needs to be translated into an offset. While we did add the offset (0x10), we forgot to account for the width. Tested by: Thomas Vogt MFC after: 3 days
2008-05-16 14:57:48 +00:00
*res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (0);
case PUC_CFG_GET_TYPE:
*res = PUC_TYPE_SERIAL;
return (0);
default:
break;
}
return (ENXIO);
}
static int
puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
switch (cmd) {
case PUC_CFG_GET_OFS:
*res = (port < 3) ? 0 : (port - 2) << 3;
return (0);
case PUC_CFG_GET_RID:
*res = 0x14 + ((port >= 2) ? 0x0c : port << 2);
return (0);
default:
break;
}
return (ENXIO);
}
Reference in New Issue Copy Permalink