2003-02-20 20:02:32 +00:00
|
|
|
|
/*-
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
* Copyright (c) 2003 - 2005 S<EFBFBD>ren Schmidt <sos@FreeBSD.org>
|
2003-02-20 20:02:32 +00:00
|
|
|
|
* All rights reserved.
|
|
|
|
|
|
*
|
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
|
* are met:
|
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
|
* notice, this list of conditions and the following disclaimer,
|
|
|
|
|
|
* without modification, immediately at the beginning of the file.
|
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
|
*
|
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
|
*
|
|
|
|
|
|
* $FreeBSD$
|
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
/* structure holding chipset config info */
|
|
|
|
|
|
struct ata_chip_id {
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
u_int32_t chipid;
|
|
|
|
|
|
u_int8_t chiprev;
|
|
|
|
|
|
int cfg1;
|
|
|
|
|
|
int cfg2;
|
|
|
|
|
|
u_int8_t max_dma;
|
|
|
|
|
|
char *text;
|
2003-02-20 20:02:32 +00:00
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/* structure describing a PCI ATA controller */
|
|
|
|
|
|
struct ata_pci_controller {
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
device_t dev;
|
|
|
|
|
|
int r_type1;
|
|
|
|
|
|
int r_rid1;
|
|
|
|
|
|
struct resource *r_res1;
|
|
|
|
|
|
int r_type2;
|
|
|
|
|
|
int r_rid2;
|
|
|
|
|
|
struct resource *r_res2;
|
|
|
|
|
|
struct resource *r_irq;
|
|
|
|
|
|
void *handle;
|
|
|
|
|
|
struct ata_chip_id *chip;
|
|
|
|
|
|
int channels;
|
|
|
|
|
|
int (*chipinit)(device_t);
|
2005-04-05 14:51:43 +00:00
|
|
|
|
int (*allocate)(device_t);
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
int (*locking)(struct ata_channel *, int);
|
|
|
|
|
|
void (*reset)(struct ata_channel *);
|
|
|
|
|
|
void (*dmainit)(struct ata_channel *);
|
|
|
|
|
|
void (*setmode)(struct ata_device *, int);
|
2003-02-20 20:02:32 +00:00
|
|
|
|
struct {
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
void (*function)(void *);
|
|
|
|
|
|
void *argument;
|
|
|
|
|
|
} interrupt[8]; /* SOS max ch# for now XXX */
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/* structure for SATA connection update hotplug/hotswap support */
|
|
|
|
|
|
struct ata_connect_task {
|
|
|
|
|
|
struct task task;
|
|
|
|
|
|
device_t dev;
|
|
|
|
|
|
int action;
|
|
|
|
|
|
#define ATA_C_ATTACH 1
|
|
|
|
|
|
#define ATA_C_DETACH 2
|
2003-02-20 20:02:32 +00:00
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/* defines for known chipset PCI id's */
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
#define ATA_ACARD_ID 0x1191
|
|
|
|
|
|
#define ATA_ATP850 0x00021191
|
|
|
|
|
|
#define ATA_ATP850A 0x00041191
|
|
|
|
|
|
#define ATA_ATP850R 0x00051191
|
|
|
|
|
|
#define ATA_ATP860A 0x00061191
|
|
|
|
|
|
#define ATA_ATP860R 0x00071191
|
|
|
|
|
|
#define ATA_ATP865A 0x00081191
|
|
|
|
|
|
#define ATA_ATP865R 0x00091191
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_AMD_ID 0x1022
|
|
|
|
|
|
#define ATA_AMD755 0x74011022
|
|
|
|
|
|
#define ATA_AMD756 0x74091022
|
|
|
|
|
|
#define ATA_AMD766 0x74111022
|
|
|
|
|
|
#define ATA_AMD768 0x74411022
|
|
|
|
|
|
#define ATA_AMD8111 0x74691022
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_ACER_LABS_ID 0x10b9
|
|
|
|
|
|
#define ATA_ALI_5229 0x522910b9
|
2005-04-05 14:51:43 +00:00
|
|
|
|
#define ATA_ALI_5281 0x528110b9
|
|
|
|
|
|
#define ATA_ALI_5287 0x528710b9
|
|
|
|
|
|
#define ATA_ALI_5289 0x528910b9
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
|
|
|
|
|
|
#define ATA_CENATEK_ID 0x16ca
|
|
|
|
|
|
#define ATA_CENATEK_ROCKET 0x000116ca
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_CYRIX_ID 0x1078
|
|
|
|
|
|
#define ATA_CYRIX_5530 0x01021078
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_CYPRESS_ID 0x1080
|
|
|
|
|
|
#define ATA_CYPRESS_82C693 0xc6931080
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_DEC_21150 0x00221011
|
|
|
|
|
|
#define ATA_DEC_21150_1 0x00231011
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_HIGHPOINT_ID 0x1103
|
|
|
|
|
|
#define ATA_HPT366 0x00041103
|
|
|
|
|
|
#define ATA_HPT372 0x00051103
|
|
|
|
|
|
#define ATA_HPT302 0x00061103
|
|
|
|
|
|
#define ATA_HPT371 0x00071103
|
|
|
|
|
|
#define ATA_HPT374 0x00081103
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_INTEL_ID 0x8086
|
|
|
|
|
|
#define ATA_I960RM 0x09628086
|
|
|
|
|
|
#define ATA_I82371FB 0x12308086
|
|
|
|
|
|
#define ATA_I82371SB 0x70108086
|
|
|
|
|
|
#define ATA_I82371AB 0x71118086
|
|
|
|
|
|
#define ATA_I82443MX 0x71998086
|
|
|
|
|
|
#define ATA_I82451NX 0x84ca8086
|
|
|
|
|
|
#define ATA_I82372FB 0x76018086
|
|
|
|
|
|
#define ATA_I82801AB 0x24218086
|
|
|
|
|
|
#define ATA_I82801AA 0x24118086
|
|
|
|
|
|
#define ATA_I82801BA 0x244a8086
|
|
|
|
|
|
#define ATA_I82801BA_1 0x244b8086
|
|
|
|
|
|
#define ATA_I82801CA 0x248a8086
|
|
|
|
|
|
#define ATA_I82801CA_1 0x248b8086
|
|
|
|
|
|
#define ATA_I82801DB 0x24cb8086
|
|
|
|
|
|
#define ATA_I82801DB_1 0x24ca8086
|
|
|
|
|
|
#define ATA_I82801EB 0x24db8086
|
|
|
|
|
|
#define ATA_I82801EB_S1 0x24d18086
|
|
|
|
|
|
#define ATA_I82801EB_R1 0x24df8086
|
|
|
|
|
|
#define ATA_I6300ESB 0x25a28086
|
|
|
|
|
|
#define ATA_I6300ESB_S1 0x25a38086
|
|
|
|
|
|
#define ATA_I6300ESB_R1 0x25b08086
|
|
|
|
|
|
#define ATA_I82801FB 0x266f8086
|
|
|
|
|
|
#define ATA_I82801FB_S1 0x26518086
|
|
|
|
|
|
#define ATA_I82801FB_R1 0x26528086
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_ITE_ID 0x1283
|
|
|
|
|
|
#define ATA_IT8212F 0x82121283
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_MICRON_ID 0x1042
|
|
|
|
|
|
#define ATA_MICRON_RZ1000 0x10001042
|
|
|
|
|
|
#define ATA_MICRON_RZ1001 0x10011042
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_NATIONAL_ID 0x100b
|
|
|
|
|
|
#define ATA_SC1100 0x0502100b
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_NVIDIA_ID 0x10de
|
|
|
|
|
|
#define ATA_NFORCE1 0x01bc10de
|
|
|
|
|
|
#define ATA_NFORCE2 0x006510de
|
|
|
|
|
|
#define ATA_NFORCE2_MCP 0x008510de
|
|
|
|
|
|
#define ATA_NFORCE3 0x00d510de
|
|
|
|
|
|
#define ATA_NFORCE3_PRO 0x00e510de
|
|
|
|
|
|
#define ATA_NFORCE3_PRO_S1 0x00e310de
|
|
|
|
|
|
#define ATA_NFORCE3_PRO_S2 0x00ee10de
|
|
|
|
|
|
#define ATA_NFORCE3_MCP 0x003510de
|
|
|
|
|
|
#define ATA_NFORCE3_MCP_S1 0x003610de
|
|
|
|
|
|
#define ATA_NFORCE3_MCP_S2 0x003e10de
|
|
|
|
|
|
#define ATA_NFORCE4 0x005310de
|
|
|
|
|
|
#define ATA_NFORCE4_S1 0x005410de
|
|
|
|
|
|
#define ATA_NFORCE4_S2 0x005510de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_PROMISE_ID 0x105a
|
|
|
|
|
|
#define ATA_PDC20246 0x4d33105a
|
|
|
|
|
|
#define ATA_PDC20262 0x4d38105a
|
|
|
|
|
|
#define ATA_PDC20263 0x0d38105a
|
|
|
|
|
|
#define ATA_PDC20265 0x0d30105a
|
|
|
|
|
|
#define ATA_PDC20267 0x4d30105a
|
|
|
|
|
|
#define ATA_PDC20268 0x4d68105a
|
|
|
|
|
|
#define ATA_PDC20269 0x4d69105a
|
|
|
|
|
|
#define ATA_PDC20270 0x6268105a
|
|
|
|
|
|
#define ATA_PDC20271 0x6269105a
|
|
|
|
|
|
#define ATA_PDC20275 0x1275105a
|
|
|
|
|
|
#define ATA_PDC20276 0x5275105a
|
|
|
|
|
|
#define ATA_PDC20277 0x7275105a
|
|
|
|
|
|
#define ATA_PDC20318 0x3318105a
|
|
|
|
|
|
#define ATA_PDC20319 0x3319105a
|
|
|
|
|
|
#define ATA_PDC20371 0x3371105a
|
|
|
|
|
|
#define ATA_PDC20375 0x3375105a
|
|
|
|
|
|
#define ATA_PDC20376 0x3376105a
|
|
|
|
|
|
#define ATA_PDC20377 0x3377105a
|
|
|
|
|
|
#define ATA_PDC20378 0x3373105a
|
|
|
|
|
|
#define ATA_PDC20379 0x3372105a
|
|
|
|
|
|
#define ATA_PDC20571 0x3571105a
|
|
|
|
|
|
#define ATA_PDC20575 0x3d75105a
|
|
|
|
|
|
#define ATA_PDC20579 0x3574105a
|
|
|
|
|
|
#define ATA_PDC20580 0x3570105a
|
|
|
|
|
|
#define ATA_PDC40518 0x3d18105a
|
|
|
|
|
|
#define ATA_PDC20617 0x6617105a
|
|
|
|
|
|
#define ATA_PDC20618 0x6626105a
|
|
|
|
|
|
#define ATA_PDC20619 0x6629105a
|
|
|
|
|
|
#define ATA_PDC20620 0x6620105a
|
|
|
|
|
|
#define ATA_PDC20621 0x6621105a
|
|
|
|
|
|
#define ATA_PDC20622 0x6622105a
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_SERVERWORKS_ID 0x1166
|
|
|
|
|
|
#define ATA_ROSB4_ISA 0x02001166
|
|
|
|
|
|
#define ATA_ROSB4 0x02111166
|
|
|
|
|
|
#define ATA_CSB5 0x02121166
|
|
|
|
|
|
#define ATA_CSB6 0x02131166
|
|
|
|
|
|
#define ATA_CSB6_1 0x02171166
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_SILICON_IMAGE_ID 0x1095
|
|
|
|
|
|
#define ATA_SII3114 0x31141095
|
|
|
|
|
|
#define ATA_SII3512 0x35121095
|
|
|
|
|
|
#define ATA_SII3112 0x31121095
|
|
|
|
|
|
#define ATA_SII3112_1 0x02401095
|
|
|
|
|
|
#define ATA_SII0680 0x06801095
|
|
|
|
|
|
#define ATA_CMD646 0x06461095
|
|
|
|
|
|
#define ATA_CMD648 0x06481095
|
|
|
|
|
|
#define ATA_CMD649 0x06491095
|
|
|
|
|
|
|
|
|
|
|
|
#define ATA_SIS_ID 0x1039
|
|
|
|
|
|
#define ATA_SISSOUTH 0x00081039
|
|
|
|
|
|
#define ATA_SIS5511 0x55111039
|
|
|
|
|
|
#define ATA_SIS5513 0x55131039
|
|
|
|
|
|
#define ATA_SIS5517 0x55171039
|
|
|
|
|
|
#define ATA_SIS5518 0x55181039
|
|
|
|
|
|
#define ATA_SIS5571 0x55711039
|
|
|
|
|
|
#define ATA_SIS5591 0x55911039
|
|
|
|
|
|
#define ATA_SIS5596 0x55961039
|
|
|
|
|
|
#define ATA_SIS5597 0x55971039
|
|
|
|
|
|
#define ATA_SIS5598 0x55981039
|
|
|
|
|
|
#define ATA_SIS5600 0x56001039
|
|
|
|
|
|
#define ATA_SIS530 0x05301039
|
|
|
|
|
|
#define ATA_SIS540 0x05401039
|
|
|
|
|
|
#define ATA_SIS550 0x05501039
|
|
|
|
|
|
#define ATA_SIS620 0x06201039
|
|
|
|
|
|
#define ATA_SIS630 0x06301039
|
|
|
|
|
|
#define ATA_SIS635 0x06351039
|
|
|
|
|
|
#define ATA_SIS633 0x06331039
|
|
|
|
|
|
#define ATA_SIS640 0x06401039
|
|
|
|
|
|
#define ATA_SIS645 0x06451039
|
|
|
|
|
|
#define ATA_SIS646 0x06461039
|
|
|
|
|
|
#define ATA_SIS648 0x06481039
|
|
|
|
|
|
#define ATA_SIS650 0x06501039
|
|
|
|
|
|
#define ATA_SIS651 0x06511039
|
|
|
|
|
|
#define ATA_SIS652 0x06521039
|
|
|
|
|
|
#define ATA_SIS655 0x06551039
|
|
|
|
|
|
#define ATA_SIS658 0x06581039
|
|
|
|
|
|
#define ATA_SIS661 0x06611039
|
|
|
|
|
|
#define ATA_SIS730 0x07301039
|
|
|
|
|
|
#define ATA_SIS733 0x07331039
|
|
|
|
|
|
#define ATA_SIS735 0x07351039
|
|
|
|
|
|
#define ATA_SIS740 0x07401039
|
|
|
|
|
|
#define ATA_SIS745 0x07451039
|
|
|
|
|
|
#define ATA_SIS746 0x07461039
|
|
|
|
|
|
#define ATA_SIS748 0x07481039
|
|
|
|
|
|
#define ATA_SIS750 0x07501039
|
|
|
|
|
|
#define ATA_SIS751 0x07511039
|
|
|
|
|
|
#define ATA_SIS752 0x07521039
|
|
|
|
|
|
#define ATA_SIS755 0x07551039
|
|
|
|
|
|
#define ATA_SIS961 0x09611039
|
|
|
|
|
|
#define ATA_SIS962 0x09621039
|
|
|
|
|
|
#define ATA_SIS963 0x09631039
|
|
|
|
|
|
#define ATA_SIS964 0x09641039
|
2005-03-31 06:25:14 +00:00
|
|
|
|
#define ATA_SIS965 0x09651039
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
#define ATA_SIS180 0x01801039
|
|
|
|
|
|
#define ATA_SIS181 0x01811039
|
2005-03-31 06:25:14 +00:00
|
|
|
|
#define ATA_SIS182 0x01821039
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
|
|
|
|
|
|
#define ATA_VIA_ID 0x1106
|
|
|
|
|
|
#define ATA_VIA82C571 0x05711106
|
|
|
|
|
|
#define ATA_VIA82C586 0x05861106
|
|
|
|
|
|
#define ATA_VIA82C596 0x05961106
|
|
|
|
|
|
#define ATA_VIA82C686 0x06861106
|
|
|
|
|
|
#define ATA_VIA8231 0x82311106
|
|
|
|
|
|
#define ATA_VIA8233 0x30741106
|
|
|
|
|
|
#define ATA_VIA8233A 0x31471106
|
|
|
|
|
|
#define ATA_VIA8233C 0x31091106
|
|
|
|
|
|
#define ATA_VIA8235 0x31771106
|
|
|
|
|
|
#define ATA_VIA8237 0x32271106
|
|
|
|
|
|
#define ATA_VIA8361 0x31121106
|
|
|
|
|
|
#define ATA_VIA8363 0x03051106
|
|
|
|
|
|
#define ATA_VIA8371 0x03911106
|
|
|
|
|
|
#define ATA_VIA8662 0x31021106
|
|
|
|
|
|
#define ATA_VIA6410 0x31641106
|
|
|
|
|
|
#define ATA_VIA6420 0x31491106
|
2003-02-20 20:02:32 +00:00
|
|
|
|
|
|
|
|
|
|
/* chipset setup related defines */
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
#define ATPOLD 1
|
2004-04-21 20:03:26 +00:00
|
|
|
|
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
#define ALIOLD 0x01
|
|
|
|
|
|
#define ALINEW 0x02
|
2005-04-05 14:51:43 +00:00
|
|
|
|
#define ALISATA 0x04
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
|
|
|
|
|
|
#define HPT366 0
|
|
|
|
|
|
#define HPT370 1
|
|
|
|
|
|
#define HPT372 2
|
|
|
|
|
|
#define HPT374 3
|
|
|
|
|
|
#define HPTOLD 0x01
|
|
|
|
|
|
|
|
|
|
|
|
#define PROLD 0
|
|
|
|
|
|
#define PRNEW 1
|
|
|
|
|
|
#define PRTX 2
|
|
|
|
|
|
#define PRMIO 3
|
|
|
|
|
|
#define PRTX4 0x01
|
|
|
|
|
|
#define PRSX4X 0x02
|
|
|
|
|
|
#define PRSX6K 0x04
|
|
|
|
|
|
#define PRPATA 0x08
|
|
|
|
|
|
#define PRCMBO 0x10
|
|
|
|
|
|
#define PRCMBO2 0x20
|
|
|
|
|
|
#define PRSATA 0x40
|
|
|
|
|
|
#define PRSATA2 0x80
|
2003-02-20 20:02:32 +00:00
|
|
|
|
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
#define SWKS33 0
|
|
|
|
|
|
#define SWKS66 1
|
|
|
|
|
|
#define SWKS100 2
|
|
|
|
|
|
|
|
|
|
|
|
#define SIIMEMIO 1
|
|
|
|
|
|
#define SIIINTR 0x01
|
|
|
|
|
|
#define SIISETCLK 0x02
|
|
|
|
|
|
#define SIIBUG 0x04
|
|
|
|
|
|
#define SII4CH 0x08
|
|
|
|
|
|
|
|
|
|
|
|
#define SIS_SOUTH 1
|
|
|
|
|
|
#define SISSATA 2
|
|
|
|
|
|
#define SIS133NEW 3
|
|
|
|
|
|
#define SIS133OLD 4
|
|
|
|
|
|
#define SIS100NEW 5
|
|
|
|
|
|
#define SIS100OLD 6
|
|
|
|
|
|
#define SIS66 7
|
|
|
|
|
|
#define SIS33 8
|
|
|
|
|
|
|
|
|
|
|
|
#define VIA33 0
|
|
|
|
|
|
#define VIA66 1
|
|
|
|
|
|
#define VIA100 2
|
|
|
|
|
|
#define VIA133 3
|
|
|
|
|
|
#define AMDNVIDIA 4
|
|
|
|
|
|
#define AMDCABLE 0x01
|
|
|
|
|
|
#define AMDBUG 0x02
|
|
|
|
|
|
#define NVIDIA 0x04
|
|
|
|
|
|
#define VIACLK 0x08
|
|
|
|
|
|
#define VIABUG 0x10
|
|
|
|
|
|
|
|
|
|
|
|
/* global prototypes ata-pci.c */
|
|
|
|
|
|
int ata_pci_probe(device_t dev);
|
|
|
|
|
|
int ata_pci_attach(device_t dev);
|
|
|
|
|
|
int ata_pci_detach(device_t dev);
|
|
|
|
|
|
struct resource * ata_pci_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags);
|
|
|
|
|
|
int ata_pci_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r);
|
|
|
|
|
|
int ata_pci_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_intr_t *function, void *argument, void **cookiep);
|
|
|
|
|
|
int ata_pci_teardown_intr(device_t dev, device_t child, struct resource *irq, void *cookie);
|
|
|
|
|
|
extern driver_t ata_channel_driver;
|
|
|
|
|
|
|
|
|
|
|
|
/* global prototypes ata-chipset.c */
|
2003-02-20 20:02:32 +00:00
|
|
|
|
int ata_generic_ident(device_t);
|
|
|
|
|
|
int ata_acard_ident(device_t);
|
|
|
|
|
|
int ata_ali_ident(device_t);
|
|
|
|
|
|
int ata_amd_ident(device_t);
|
|
|
|
|
|
int ata_cyrix_ident(device_t);
|
|
|
|
|
|
int ata_cypress_ident(device_t);
|
|
|
|
|
|
int ata_highpoint_ident(device_t);
|
|
|
|
|
|
int ata_intel_ident(device_t);
|
2004-12-08 11:17:38 +00:00
|
|
|
|
int ata_ite_ident(device_t);
|
2003-08-24 09:22:26 +00:00
|
|
|
|
int ata_national_ident(device_t);
|
2003-02-20 20:02:32 +00:00
|
|
|
|
int ata_nvidia_ident(device_t);
|
|
|
|
|
|
int ata_promise_ident(device_t);
|
|
|
|
|
|
int ata_serverworks_ident(device_t);
|
|
|
|
|
|
int ata_sii_ident(device_t);
|
|
|
|
|
|
int ata_sis_ident(device_t);
|
|
|
|
|
|
int ata_via_ident(device_t);
|
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
|
|
|
|
int ata_legacy(device_t);
|
|
|
|
|
|
struct ata_chip_id *ata_match_chip(device_t, struct ata_chip_id *);
|
|
|
|
|
|
|
|
|
|
|
|
/* global prototypes ata-dma.c */
|
|
|
|
|
|
void ata_dmainit(struct ata_channel *);
|