freebsd-dev/sys/dev/mlx/mlx_disk.c

289 lines
7.2 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Jonathan Lemon
* Copyright (c) 1999 Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Disk driver for Mylex DAC960 RAID adapters.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/devicestat.h>
#include <sys/disk.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <dev/mlx/mlx_compat.h>
#include <dev/mlx/mlxio.h>
#include <dev/mlx/mlxvar.h>
#include <dev/mlx/mlxreg.h>
/* prototypes */
static int mlxd_probe(device_t dev);
static int mlxd_attach(device_t dev);
static int mlxd_detach(device_t dev);
static d_open_t mlxd_open;
static d_close_t mlxd_close;
static d_strategy_t mlxd_strategy;
static d_ioctl_t mlxd_ioctl;
#define MLXD_CDEV_MAJOR 131
static struct cdevsw mlxd_cdevsw = {
/* open */ mlxd_open,
/* close */ mlxd_close,
/* read */ physread,
/* write */ physwrite,
/* ioctl */ mlxd_ioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ mlxd_strategy,
/* name */ "mlxd",
/* maj */ MLXD_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ D_DISK,
};
devclass_t mlxd_devclass;
static struct cdevsw mlxddisk_cdevsw;
static device_method_t mlxd_methods[] = {
DEVMETHOD(device_probe, mlxd_probe),
DEVMETHOD(device_attach, mlxd_attach),
DEVMETHOD(device_detach, mlxd_detach),
{ 0, 0 }
};
static driver_t mlxd_driver = {
"mlxd",
mlxd_methods,
sizeof(struct mlxd_softc)
};
DRIVER_MODULE(mlxd, mlx, mlxd_driver, mlxd_devclass, 0, 0);
static int
mlxd_open(dev_t dev, int flags, int fmt, struct thread *td)
{
struct mlxd_softc *sc = (struct mlxd_softc *)dev->si_drv1;
struct disklabel *label;
debug_called(1);
if (sc == NULL)
return (ENXIO);
/* controller not active? */
if (sc->mlxd_controller->mlx_state & MLX_STATE_SHUTDOWN)
return(ENXIO);
label = &sc->mlxd_disk.d_label;
bzero(label, sizeof(*label));
label->d_type = DTYPE_SCSI;
label->d_secsize = MLX_BLKSIZE;
label->d_nsectors = sc->mlxd_drive->ms_sectors;
label->d_ntracks = sc->mlxd_drive->ms_heads;
label->d_ncylinders = sc->mlxd_drive->ms_cylinders;
label->d_secpercyl = sc->mlxd_drive->ms_sectors * sc->mlxd_drive->ms_heads;
label->d_secperunit = sc->mlxd_drive->ms_size;
sc->mlxd_flags |= MLXD_OPEN;
return (0);
}
static int
mlxd_close(dev_t dev, int flags, int fmt, struct thread *td)
{
struct mlxd_softc *sc = (struct mlxd_softc *)dev->si_drv1;
debug_called(1);
if (sc == NULL)
return (ENXIO);
sc->mlxd_flags &= ~MLXD_OPEN;
return (0);
}
static int
mlxd_ioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, struct thread *td)
{
struct mlxd_softc *sc = (struct mlxd_softc *)dev->si_drv1;
int error;
debug_called(1);
if (sc == NULL)
return (ENXIO);
if ((error = mlx_submit_ioctl(sc->mlxd_controller, sc->mlxd_drive, cmd, addr, flag, td)) != ENOIOCTL) {
debug(0, "mlx_submit_ioctl returned %d\n", error);
return(error);
}
return (ENOTTY);
}
/*
* Read/write routine for a buffer. Finds the proper unit, range checks
* arguments, and schedules the transfer. Does not wait for the transfer
* to complete. Multi-page transfers are supported. All I/O requests must
* be a multiple of a sector in length.
*/
static void
mlxd_strategy(mlx_bio *bp)
{
struct mlxd_softc *sc = (struct mlxd_softc *)MLX_BIO_SOFTC(bp);
debug_called(1);
/* bogus disk? */
if (sc == NULL) {
MLX_BIO_SET_ERROR(bp, EINVAL);
goto bad;
}
/* XXX may only be temporarily offline - sleep? */
if (sc->mlxd_drive->ms_state == MLX_SYSD_OFFLINE) {
MLX_BIO_SET_ERROR(bp, ENXIO);
goto bad;
}
MLX_BIO_STATS_START(bp);
mlx_submit_buf(sc->mlxd_controller, bp);
return;
bad:
/*
* Correctly set the bio to indicate a failed tranfer.
*/
MLX_BIO_RESID(bp) = MLX_BIO_LENGTH(bp);
MLX_BIO_DONE(bp);
return;
}
void
mlxd_intr(void *data)
{
mlx_bio *bp = (mlx_bio *)data;
debug_called(1);
if (MLX_BIO_HAS_ERROR(bp))
MLX_BIO_SET_ERROR(bp, EIO);
else
MLX_BIO_RESID(bp) = 0;
MLX_BIO_STATS_END(bp);
MLX_BIO_DONE(bp);
}
static int
mlxd_probe(device_t dev)
{
debug_called(1);
device_set_desc(dev, "Mylex System Drive");
return (0);
}
static int
mlxd_attach(device_t dev)
{
struct mlxd_softc *sc = (struct mlxd_softc *)device_get_softc(dev);
device_t parent;
char *state;
dev_t dsk;
int s1, s2;
debug_called(1);
parent = device_get_parent(dev);
sc->mlxd_controller = (struct mlx_softc *)device_get_softc(parent);
sc->mlxd_unit = device_get_unit(dev);
sc->mlxd_drive = device_get_ivars(dev);
sc->mlxd_dev = dev;
switch(sc->mlxd_drive->ms_state) {
case MLX_SYSD_ONLINE:
state = "online";
break;
case MLX_SYSD_CRITICAL:
state = "critical";
break;
case MLX_SYSD_OFFLINE:
state = "offline";
break;
default:
state = "unknown state";
}
device_printf(dev, "%uMB (%u sectors) RAID %d (%s)\n",
sc->mlxd_drive->ms_size / ((1024 * 1024) / MLX_BLKSIZE),
sc->mlxd_drive->ms_size, sc->mlxd_drive->ms_raidlevel, state);
devstat_add_entry(&sc->mlxd_stats, "mlxd", sc->mlxd_unit, MLX_BLKSIZE,
DEVSTAT_NO_ORDERED_TAGS,
DEVSTAT_TYPE_STORARRAY | DEVSTAT_TYPE_IF_OTHER,
DEVSTAT_PRIORITY_ARRAY);
dsk = disk_create(sc->mlxd_unit, &sc->mlxd_disk, 0, &mlxd_cdevsw, &mlxddisk_cdevsw);
Major update to the Mylex DAC960 driver adding new hardware support and fixing some major bugs. - Add support for the v5 firmware interface, used by the DAC1164P (tested) and AcceleRAID 352 (untested but should work). We now cover all of the Mylex family's protocols except for v2 (used by EISA and Alpha-compatible cards). - Fix an accounting bug which resulted in endless 'poll still busy' messages. In situations of high controller load the count of poll commands could be incremented without actually successfully launching a command. This totally removes the accounting for status poll commnads; it was its own worst enemy. - Add some simple reentry prevention locks to processing of the waiting and completed command queues to prevent races which could result in I/O being done or completed twice (both are fatal). This highlights a need for simple locking primitives in both the UP and SMP kernels. - Streamline the handling of command completion to reduce the amount of redundant work being done. Remove the code which tests for commands that have gone missing in action; nobody has ever seen one of these and it wouldn't have worked properly anyhow. - Handle disconnection of drives from the controller in the detach, not shutdown method. This avoids problems flushing the cache in a panic when a drive is mounted. - Don't call bus_generic_detach when disconnecting drives; it doesn't actually do anything useful. - Increment the log message index regardless of whether we actually retrieved one or not. If we run into a message that we can't fetch, we don't want to spin endlessly complaining about the fact. - Don't assume that interrupts will work when we're flushing the controller. We may think they are enabled, but in eg. a panic situation the controller may not be able to deliver an interrupt.
1999-12-11 00:00:13 +00:00
dsk->si_drv1 = sc;
sc->mlxd_dev_t = dsk;
/*
* Set maximum I/O size to the lesser of the recommended maximum and the practical
* maximum.
*/
s1 = sc->mlxd_controller->mlx_enq2->me_maxblk * MLX_BLKSIZE;
s2 = (sc->mlxd_controller->mlx_enq2->me_max_sg - 1) * PAGE_SIZE;
dsk->si_iosize_max = imin(s1, s2);
return (0);
}
static int
mlxd_detach(device_t dev)
{
struct mlxd_softc *sc = (struct mlxd_softc *)device_get_softc(dev);
debug_called(1);
devstat_remove_entry(&sc->mlxd_stats);
disk_destroy(sc->mlxd_dev_t);
return(0);
}