freebsd-dev/lib/libarchive/archive_read_support_format_tar.c

1647 lines
45 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2003-2004 Tim Kientzle
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "archive_platform.h"
__FBSDID("$FreeBSD$");
#include <sys/stat.h>
#include <errno.h>
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* #include <stdint.h> */ /* See archive_platform.h */
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <wchar.h>
#include "archive.h"
#include "archive_entry.h"
#include "archive_private.h"
/*
* Layout of POSIX 'ustar' tar header.
*/
struct archive_entry_header_ustar {
char name[100];
char mode[8];
char uid[8];
char gid[8];
char size[12];
char mtime[12];
char checksum[8];
char typeflag[1];
char linkname[100]; /* "old format" header ends here */
char magic[6]; /* For POSIX: "ustar\0" */
char version[2]; /* For POSIX: "00" */
char uname[32];
char gname[32];
char rdevmajor[8];
char rdevminor[8];
char prefix[155];
};
/*
* Structure of GNU tar header
*/
struct gnu_sparse {
char offset[12];
char numbytes[12];
};
struct archive_entry_header_gnutar {
char name[100];
char mode[8];
char uid[8];
char gid[8];
char size[12];
char mtime[12];
char checksum[8];
char typeflag[1];
char linkname[100];
char magic[8]; /* "ustar \0" (note blank/blank/null at end) */
char uname[32];
char gname[32];
char rdevmajor[8];
char rdevminor[8];
char atime[12];
char ctime[12];
char offset[12];
char longnames[4];
char unused[1];
struct gnu_sparse sparse[4];
char isextended[1];
char realsize[12];
/*
* GNU doesn't use POSIX 'prefix' field; they use the 'L' (longname)
* entry instead.
*/
};
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/*
* Data specific to this format.
*/
struct sparse_block {
struct sparse_block *next;
off_t offset;
off_t remaining;
};
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
struct tar {
struct archive_string acl_text;
struct archive_string entry_name;
struct archive_string entry_linkname;
struct archive_string entry_uname;
struct archive_string entry_gname;
struct archive_string longlink;
struct archive_string longname;
struct archive_string pax_header;
struct archive_string pax_global;
wchar_t *pax_entry;
size_t pax_entry_length;
int header_recursion_depth;
off_t entry_bytes_remaining;
off_t entry_offset;
off_t entry_padding;
struct sparse_block *sparse_list;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
};
static size_t UTF8_mbrtowc(wchar_t *pwc, const char *s, size_t n);
static int archive_block_is_null(const unsigned char *p);
int gnu_read_sparse_data(struct archive *, struct tar *,
const struct archive_entry_header_gnutar *header);
void gnu_parse_sparse_data(struct archive *, struct tar *,
const struct gnu_sparse *sparse, int length);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int header_Solaris_ACL(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *);
static int header_common(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int header_old_tar(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int header_pax_extensions(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *);
static int header_pax_global(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *h);
static int header_longlink(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *h);
static int header_longname(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *h);
static int header_volume(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *h);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int header_ustar(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *h);
static int header_gnutar(struct archive *, struct tar *,
struct archive_entry *, struct stat *, const void *h);
static int archive_read_format_tar_bid(struct archive *);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int archive_read_format_tar_cleanup(struct archive *);
static int archive_read_format_tar_read_data(struct archive *a,
const void **buff, size_t *size, off_t *offset);
static int archive_read_format_tar_read_header(struct archive *,
struct archive_entry *);
static int checksum(struct archive *, const void *);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int pax_attribute(struct archive_entry *, struct stat *,
wchar_t *key, wchar_t *value);
static int pax_header(struct archive *, struct tar *,
struct archive_entry *, struct stat *, char *attr);
static void pax_time(const wchar_t *, int64_t *sec, long *nanos);
static int read_body_to_string(struct archive *, struct tar *,
struct archive_string *, const void *h);
static int64_t tar_atol(const char *, unsigned);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int64_t tar_atol10(const wchar_t *, unsigned);
static int64_t tar_atol256(const char *, unsigned);
static int64_t tar_atol8(const char *, unsigned);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int tar_read_header(struct archive *, struct tar *,
struct archive_entry *, struct stat *);
static int utf8_decode(wchar_t *, const char *, size_t length);
/*
* ANSI C99 defines constants for these, but not everyone supports
* those constants, so I define a couple of static variables here and
* compute the values. These calculations should be portable to any
* 2s-complement architecture.
*/
#ifdef UINT64_MAX
static const uint64_t max_uint64 = UINT64_MAX;
#else
static const uint64_t max_uint64 = ~(uint64_t)0;
#endif
#ifdef INT64_MAX
static const int64_t max_int64 = INT64_MAX;
#else
static const int64_t max_int64 = (int64_t)((~(uint64_t)0) >> 1);
#endif
#ifdef INT64_MIN
static const int64_t min_int64 = INT64_MIN;
#else
static const int64_t min_int64 = (int64_t)(~((~(uint64_t)0) >> 1));
#endif
int
archive_read_support_format_gnutar(struct archive *a)
{
return (archive_read_support_format_tar(a));
}
int
archive_read_support_format_tar(struct archive *a)
{
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
struct tar *tar;
int r;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
tar = malloc(sizeof(*tar));
memset(tar, 0, sizeof(*tar));
r = __archive_read_register_format(a, tar,
archive_read_format_tar_bid,
archive_read_format_tar_read_header,
archive_read_format_tar_read_data,
NULL,
archive_read_format_tar_cleanup);
if (r != ARCHIVE_OK)
free(tar);
return (ARCHIVE_OK);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
}
static int
archive_read_format_tar_cleanup(struct archive *a)
{
struct tar *tar;
tar = *(a->pformat_data);
archive_string_free(&tar->acl_text);
archive_string_free(&tar->entry_name);
archive_string_free(&tar->entry_linkname);
archive_string_free(&tar->entry_uname);
archive_string_free(&tar->entry_gname);
archive_string_free(&tar->pax_global);
archive_string_free(&tar->pax_header);
if (tar->pax_entry != NULL)
free(tar->pax_entry);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
free(tar);
*(a->pformat_data) = NULL;
return (ARCHIVE_OK);
}
static int
archive_read_format_tar_bid(struct archive *a)
{
int bid;
ssize_t bytes_read;
const void *h;
const struct archive_entry_header_ustar *header;
/*
* If we're already reading a non-tar file, don't
* bother to bid.
*/
if (a->archive_format != 0 &&
(a->archive_format & ARCHIVE_FORMAT_BASE_MASK) !=
ARCHIVE_FORMAT_TAR)
return (0);
bid = 0;
/*
* If we're already reading a tar format, start the bid at 1 as
* a failsafe.
*/
if ((a->archive_format & ARCHIVE_FORMAT_BASE_MASK) ==
ARCHIVE_FORMAT_TAR)
bid++;
/* Now let's look at the actual header and see if it matches. */
if (a->compression_read_ahead != NULL)
bytes_read = (a->compression_read_ahead)(a, &h, 512);
else
bytes_read = 0; /* Empty file. */
if (bytes_read < 0)
return (ARCHIVE_FATAL);
if (bytes_read == 0 && bid > 0) {
/* An archive without a proper end-of-archive marker. */
/* Hold our nose and bid 1 anyway. */
return (1);
}
if (bytes_read < 512) {
/* If it's a new archive, then just return a zero bid. */
if (bid == 0)
return (0);
/*
* If we already know this is a tar archive,
* then we have a problem.
*/
archive_set_error(a, ARCHIVE_ERRNO_FILE_FORMAT,
"Truncated tar archive");
return (ARCHIVE_FATAL);
}
/* If it's an end-of-archive mark, we can handle it. */
if ((*(const char *)h) == 0 && archive_block_is_null(h)) {
/* If it's a known tar file, end-of-archive is definite. */
if ((a->archive_format & ARCHIVE_FORMAT_BASE_MASK) ==
ARCHIVE_FORMAT_TAR)
return (512);
/* Empty archive? */
return (1);
}
/* If it's not an end-of-archive mark, it must have a valid checksum.*/
if (!checksum(a, h))
return (0);
bid += 48; /* Checksum is usually 6 octal digits. */
header = h;
/* Recognize POSIX formats. */
if ((memcmp(header->magic, "ustar\0", 6) == 0)
&&(memcmp(header->version, "00", 2)==0))
bid += 56;
/* Recognize GNU tar format. */
if ((memcmp(header->magic, "ustar ", 6) == 0)
&&(memcmp(header->version, " \0", 2)==0))
bid += 56;
/* Type flag must be null, digit or A-Z, a-z. */
if (header->typeflag[0] != 0 &&
!( header->typeflag[0] >= '0' && header->typeflag[0] <= '9') &&
!( header->typeflag[0] >= 'A' && header->typeflag[0] <= 'Z') &&
!( header->typeflag[0] >= 'a' && header->typeflag[0] <= 'z') )
return (0);
bid += 2; /* 6 bits of variation in an 8-bit field leaves 2 bits. */
/* Sanity check: Look at first byte of mode field. */
switch (255 & (unsigned)header->mode[0]) {
case 0: case 255:
/* Base-256 value: No further verification possible! */
break;
case ' ': /* Not recommended, but not illegal, either. */
break;
case '0': case '1': case '2': case '3':
case '4': case '5': case '6': case '7':
/* Octal Value. */
/* TODO: Check format of remainder of this field. */
break;
default:
/* Not a valid mode; bail out here. */
return (0);
}
/* TODO: Sanity test uid/gid/size/mtime/rdevmajor/rdevminor fields. */
return (bid);
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/*
* The function invoked by archive_read_header(). This
* just sets up a few things and then calls the internal
* tar_read_header() function below.
*/
static int
archive_read_format_tar_read_header(struct archive *a,
struct archive_entry *entry)
{
struct stat st;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
struct tar *tar;
const char *p;
int r;
size_t l;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
memset(&st, 0, sizeof(st));
tar = *(a->pformat_data);
tar->entry_offset = 0;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
r = tar_read_header(a, tar, entry, &st);
if (r == ARCHIVE_OK) {
/*
* "Regular" entry with trailing '/' is really
* directory: This is needed for certain old tar
* variants and even for some broken newer ones.
*/
p = archive_entry_pathname(entry);
l = strlen(p);
if (S_ISREG(st.st_mode) && p[l-1] == '/') {
st.st_mode &= ~S_IFMT;
st.st_mode |= S_IFDIR;
}
/* Copy the final stat data into the entry. */
archive_entry_copy_stat(entry, &st);
}
return (r);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
}
static int
archive_read_format_tar_read_data(struct archive *a,
const void **buff, size_t *size, off_t *offset)
{
ssize_t bytes_read;
struct tar *tar;
struct sparse_block *p;
tar = *(a->pformat_data);
if (tar->entry_bytes_remaining > 0) {
bytes_read = (a->compression_read_ahead)(a, buff, 1);
if (bytes_read <= 0)
return (ARCHIVE_FATAL);
if (bytes_read > tar->entry_bytes_remaining)
bytes_read = tar->entry_bytes_remaining;
while (tar->sparse_list != NULL &&
tar->sparse_list->remaining == 0) {
p = tar->sparse_list;
tar->sparse_list = p->next;
free(p);
if (tar->sparse_list != NULL)
tar->entry_offset = tar->sparse_list->offset;
}
if (tar->sparse_list != NULL) {
if (tar->sparse_list->remaining < bytes_read)
bytes_read = tar->sparse_list->remaining;
tar->sparse_list->remaining -= bytes_read;
}
*size = bytes_read;
*offset = tar->entry_offset;
tar->entry_offset += bytes_read;
tar->entry_bytes_remaining -= bytes_read;
(a->compression_read_consume)(a, bytes_read);
return (ARCHIVE_OK);
} else {
while (tar->entry_padding > 0) {
bytes_read = (a->compression_read_ahead)(a, buff, 1);
if (bytes_read <= 0)
return (ARCHIVE_FATAL);
if (bytes_read > tar->entry_padding)
bytes_read = tar->entry_padding;
(a->compression_read_consume)(a, bytes_read);
tar->entry_padding -= bytes_read;
}
*buff = NULL;
*size = 0;
*offset = tar->entry_offset;
return (ARCHIVE_EOF);
}
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/*
* This function recursively interprets all of the headers associated
* with a single entry.
*/
static int
tar_read_header(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st)
{
ssize_t bytes;
int err;
const void *h;
const struct archive_entry_header_ustar *header;
/* Read 512-byte header record */
bytes = (a->compression_read_ahead)(a, &h, 512);
if (bytes < 512) {
/*
* If we're here, it's becase the _bid function accepted
* this file. So just call a short read end-of-archive
* and be done with it.
*/
return (ARCHIVE_EOF);
}
(a->compression_read_consume)(a, 512);
/* Check for end-of-archive mark. */
if (((*(const char *)h)==0) && archive_block_is_null(h)) {
/* Try to consume a second all-null record, as well. */
bytes = (a->compression_read_ahead)(a, &h, 512);
if (bytes > 0)
(a->compression_read_consume)(a, bytes);
archive_set_error(a, 0, NULL);
return (ARCHIVE_EOF);
}
/*
* Note: If the checksum fails and we return ARCHIVE_RETRY,
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
* then the client is likely to just retry. This is a very
* crude way to search for the next valid header!
*
* TODO: Improve this by implementing a real header scan.
*/
if (!checksum(a, h)) {
archive_set_error(a, EINVAL, "Damaged tar archive");
return (ARCHIVE_RETRY); /* Retryable: Invalid header */
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (++tar->header_recursion_depth > 32) {
archive_set_error(a, EINVAL, "Too many special headers");
return (ARCHIVE_WARN);
}
/* Determine the format variant. */
header = h;
switch(header->typeflag[0]) {
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
case 'A': /* Solaris tar ACL */
a->archive_format = ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
a->archive_format_name = "Solaris tar";
err = header_Solaris_ACL(a, tar, entry, st, h);
break;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
case 'g': /* POSIX-standard 'g' header. */
a->archive_format = ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE;
a->archive_format_name = "POSIX pax interchange format";
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err = header_pax_global(a, tar, entry, st, h);
break;
case 'K': /* Long link name (GNU tar, others) */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err = header_longlink(a, tar, entry, st, h);
break;
case 'L': /* Long filename (GNU tar, others) */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err = header_longname(a, tar, entry, st, h);
break;
case 'V': /* GNU volume header */
err = header_volume(a, tar, entry, st, h);
break;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
case 'X': /* Used by SUN tar; same as 'x'. */
a->archive_format = ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE;
a->archive_format_name =
"POSIX pax interchange format (Sun variant)";
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err = header_pax_extensions(a, tar, entry, st, h);
break;
case 'x': /* POSIX-standard 'x' header. */
a->archive_format = ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE;
a->archive_format_name = "POSIX pax interchange format";
err = header_pax_extensions(a, tar, entry, st, h);
break;
default:
if (memcmp(header->magic, "ustar \0", 8) == 0) {
a->archive_format = ARCHIVE_FORMAT_TAR_GNUTAR;
a->archive_format_name = "GNU tar format";
err = header_gnutar(a, tar, entry, st, h);
} else if (memcmp(header->magic, "ustar", 5) == 0) {
if (a->archive_format != ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE) {
a->archive_format = ARCHIVE_FORMAT_TAR_USTAR;
a->archive_format_name = "POSIX ustar format";
}
err = header_ustar(a, tar, entry, st, h);
} else {
a->archive_format = ARCHIVE_FORMAT_TAR;
a->archive_format_name = "tar (non-POSIX)";
err = header_old_tar(a, tar, entry, st, h);
}
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
--tar->header_recursion_depth;
return (err);
}
/*
* Return true if block checksum is correct.
*/
static int
checksum(struct archive *a, const void *h)
{
const unsigned char *bytes;
const struct archive_entry_header_ustar *header;
int check, i, sum;
(void)a; /* UNUSED */
bytes = h;
header = h;
/*
* Test the checksum. Note that POSIX specifies _unsigned_
* bytes for this calculation.
*/
sum = tar_atol(header->checksum, sizeof(header->checksum));
check = 0;
for (i = 0; i < 148; i++)
check += (unsigned char)bytes[i];
for (; i < 156; i++)
check += 32;
for (; i < 512; i++)
check += (unsigned char)bytes[i];
if (sum == check)
return (1);
/*
* Repeat test with _signed_ bytes, just in case this archive
* was created by an old BSD, Solaris, or HP-UX tar with a
* broken checksum calculation.
*/
check = 0;
for (i = 0; i < 148; i++)
check += (signed char)bytes[i];
for (; i < 156; i++)
check += 32;
for (; i < 512; i++)
check += (signed char)bytes[i];
if (sum == check)
return (1);
return (0);
}
/*
* Return true if this block contains only nulls.
*/
static int
archive_block_is_null(const unsigned char *p)
{
unsigned i;
for (i = 0; i < ARCHIVE_BYTES_PER_RECORD / sizeof(*p); i++)
if (*p++)
return (0);
return (1);
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/*
* Interpret 'A' Solaris ACL header
*/
static int
header_Solaris_ACL(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st, const void *h)
{
int err, err2;
char *p;
wchar_t *wp;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err = read_body_to_string(a, tar, &(tar->acl_text), h);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err2 = tar_read_header(a, tar, entry, st);
err = err_combine(err, err2);
/* XXX Ensure p doesn't overrun acl_text */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Skip leading octal number. */
/* XXX TODO: Parse the octal number and sanity-check it. */
p = tar->acl_text.s;
while (*p != '\0')
p++;
p++;
wp = malloc((strlen(p) + 1) * sizeof(wchar_t));
if (wp != NULL) {
utf8_decode(wp, p, strlen(p));
err2 = __archive_entry_acl_parse_w(entry, wp,
ARCHIVE_ENTRY_ACL_TYPE_ACCESS);
err = err_combine(err, err2);
free(wp);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
}
return (err);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
}
/*
* Interpret 'K' long linkname header.
*/
static int
header_longlink(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st, const void *h)
{
int err, err2;
err = read_body_to_string(a, tar, &(tar->longlink), h);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err2 = tar_read_header(a, tar, entry, st);
if (err == ARCHIVE_OK && err2 == ARCHIVE_OK) {
/* Set symlink if symlink already set, else hardlink. */
archive_entry_set_link(entry, tar->longlink.s);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
}
return (err_combine(err, err2));
}
/*
* Interpret 'L' long filename header.
*/
static int
header_longname(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st, const void *h)
{
int err, err2;
err = read_body_to_string(a, tar, &(tar->longname), h);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Read and parse "real" header, then override name. */
err2 = tar_read_header(a, tar, entry, st);
if (err == ARCHIVE_OK && err2 == ARCHIVE_OK)
archive_entry_set_pathname(entry, tar->longname.s);
return (err_combine(err, err2));
}
/*
* Interpret 'V' GNU tar volume header.
*/
static int
header_volume(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st, const void *h)
{
(void)h;
/* Just skip this and read the next header. */
return (tar_read_header(a, tar, entry, st));
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/*
* Read body of an archive entry into an archive_string object.
*/
static int
read_body_to_string(struct archive *a, struct tar *tar,
struct archive_string *as, const void *h)
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
{
off_t size, padded_size;
ssize_t bytes_read, bytes_to_copy;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
const struct archive_entry_header_ustar *header;
const void *src;
char *dest;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
(void)tar; /* UNUSED */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header = h;
size = tar_atol(header->size, sizeof(header->size));
/* Read the body into the string. */
archive_string_ensure(as, size+1);
padded_size = (size + 511) & ~ 511;
dest = as->s;
while (padded_size > 0) {
bytes_read = (a->compression_read_ahead)(a, &src, padded_size);
if (bytes_read < 0)
return (ARCHIVE_FATAL);
if (bytes_read > padded_size)
bytes_read = padded_size;
(a->compression_read_consume)(a, bytes_read);
bytes_to_copy = bytes_read;
if ((off_t)bytes_to_copy > size)
bytes_to_copy = (ssize_t)size;
memcpy(dest, src, bytes_to_copy);
dest += bytes_to_copy;
size -= bytes_to_copy;
padded_size -= bytes_read;
}
*dest = '\0';
return (ARCHIVE_OK);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
}
/*
* Parse out common header elements.
*
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
* This would be the same as header_old_tar, except that the
* filename is handled slightly differently for old and POSIX
* entries (POSIX entries support a 'prefix'). This factoring
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
* allows header_old_tar and header_ustar
* to handle filenames differently, while still putting most of the
* common parsing into one place.
*/
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_common(struct archive *a, struct tar *tar, struct archive_entry *entry,
struct stat *st, const void *h)
{
const struct archive_entry_header_ustar *header;
char tartype;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
(void)a; /* UNUSED */
header = h;
if (header->linkname[0])
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_strncpy(&(tar->entry_linkname), header->linkname,
sizeof(header->linkname));
else
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_string_empty(&(tar->entry_linkname));
/* Parse out the numeric fields (all are octal) */
st->st_mode = tar_atol(header->mode, sizeof(header->mode));
st->st_uid = tar_atol(header->uid, sizeof(header->uid));
st->st_gid = tar_atol(header->gid, sizeof(header->gid));
st->st_size = tar_atol(header->size, sizeof(header->size));
st->st_mtime = tar_atol(header->mtime, sizeof(header->mtime));
/* Handle the tar type flag appropriately. */
tartype = header->typeflag[0];
st->st_mode &= ~S_IFMT;
switch (tartype) {
case '1': /* Hard link */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_entry_set_hardlink(entry, tar->entry_linkname.s);
/*
* The following may seem odd, but: Technically, tar
* does not store the file type for a "hard link"
* entry, only the fact that it is a hard link. So, I
* leave the type zero normally. But, pax interchange
* format allows hard links to have data, which
* implies that the underlying entry is a regular
* file.
*/
if (st->st_size > 0)
st->st_mode |= S_IFREG;
/*
* A tricky point: Traditionally, tar readers have
* ignored the size field when reading hardlink
* entries, and some writers put non-zero sizes even
* though the body is empty. POSIX.1-2001 broke with
* this tradition by permitting hardlink entries to
* store valid bodies in pax interchange format, but
* not in ustar format. Since there is no hard and
* fast way to distinguish pax interchange from
* earlier archives (the 'x' and 'g' entries are
* optional, after all), we need a heuristic. Here, I
* use the bid function to test whether or not there's
* a valid header following. Of course, if we know
* this is pax interchange format, then we must obey
* the size.
*
* This heuristic will only fail for a pax interchange
* archive that is storing hardlink bodies, no pax
* extended attribute entries have yet occurred, and
* we encounter a hardlink entry for a file that is
* itself an uncompressed tar archive.
*/
if (st->st_size > 0 &&
a->archive_format != ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE &&
archive_read_format_tar_bid(a) > 50)
st->st_size = 0;
break;
case '2': /* Symlink */
st->st_mode |= S_IFLNK;
st->st_size = 0;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_entry_set_symlink(entry, tar->entry_linkname.s);
break;
case '3': /* Character device */
st->st_mode |= S_IFCHR;
st->st_size = 0;
break;
case '4': /* Block device */
st->st_mode |= S_IFBLK;
st->st_size = 0;
break;
case '5': /* Dir */
st->st_mode |= S_IFDIR;
st->st_size = 0;
break;
case '6': /* FIFO device */
st->st_mode |= S_IFIFO;
st->st_size = 0;
break;
case 'D': /* GNU incremental directory type */
/*
* No special handling is actually required here.
* It might be nice someday to preprocess the file list and
* provide it to the client, though.
*/
st->st_mode |= S_IFDIR;
break;
case 'M': /* GNU "Multi-volume" (remainder of file from last archive)*/
/*
* As far as I can tell, this is just like a regular file
* entry, except that the contents should be _appended_ to
* the indicated file at the indicated offset. This may
* require some API work to fully support.
*/
break;
case 'N': /* Old GNU "long filename" entry. */
/* The body of this entry is a script for renaming
* previously-extracted entries. Ugh. It will never
* be supported by libarchive. */
st->st_mode |= S_IFREG;
break;
case 'S': /* GNU sparse files */
/*
* Sparse files are really just regular files with
* sparse information in the extended area.
*/
/* FALL THROUGH */
default: /* Regular file and non-standard types */
/*
* Per POSIX: non-recognized types should always be
* treated as regular files.
*/
st->st_mode |= S_IFREG;
break;
}
return (0);
}
/*
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
* Parse out header elements for "old-style" tar archives.
*/
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_old_tar(struct archive *a, struct tar *tar, struct archive_entry *entry,
struct stat *st, const void *h)
{
const struct archive_entry_header_ustar *header;
/* Copy filename over (to ensure null termination). */
header = h;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_strncpy(&(tar->entry_name), header->name, sizeof(header->name));
archive_entry_set_pathname(entry, tar->entry_name.s);
/* Grab rest of common fields */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_common(a, tar, entry, st, h);
tar->entry_bytes_remaining = st->st_size;
tar->entry_padding = 0x1ff & (-tar->entry_bytes_remaining);
return (0);
}
/*
* Parse a file header for a pax extended archive entry.
*/
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_pax_global(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st, const void *h)
{
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
int err, err2;
err = read_body_to_string(a, tar, &(tar->pax_global), h);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err2 = tar_read_header(a, tar, entry, st);
return (err_combine(err, err2));
}
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_pax_extensions(struct archive *a, struct tar *tar,
struct archive_entry *entry, struct stat *st, const void *h)
{
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
int err, err2;
read_body_to_string(a, tar, &(tar->pax_header), h);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Parse the next header. */
err = tar_read_header(a, tar, entry, st);
/*
* TODO: Parse global/default options into 'entry' struct here
* before handling file-specific options.
*
* This design (parse standard header, then overwrite with pax
* extended attribute data) usually works well, but isn't ideal;
* it would be better to parse the pax extended attributes first
* and then skip any fields in the standard header that were
* defined in the pax header.
*/
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
err2 = pax_header(a, tar, entry, st, tar->pax_header.s);
err = err_combine(err, err2);
tar->entry_bytes_remaining = st->st_size;
tar->entry_padding = 0x1ff & (-tar->entry_bytes_remaining);
return (err);
}
/*
* Parse a file header for a Posix "ustar" archive entry. This also
* handles "pax" or "extended ustar" entries.
*/
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_ustar(struct archive *a, struct tar *tar, struct archive_entry *entry,
struct stat *st, const void *h)
{
const struct archive_entry_header_ustar *header;
struct archive_string *as;
header = h;
/* Copy name into an internal buffer to ensure null-termination. */
as = &(tar->entry_name);
if (header->prefix[0]) {
archive_strncpy(as, header->prefix, sizeof(header->prefix));
if (as->s[archive_strlen(as) - 1] != '/')
archive_strappend_char(as, '/');
archive_strncat(as, header->name, sizeof(header->name));
} else
archive_strncpy(as, header->name, sizeof(header->name));
archive_entry_set_pathname(entry, as->s);
/* Handle rest of common fields. */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
header_common(a, tar, entry, st, h);
/* Handle POSIX ustar fields. */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_strncpy(&(tar->entry_uname), header->uname,
sizeof(header->uname));
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_entry_set_uname(entry, tar->entry_uname.s);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_strncpy(&(tar->entry_gname), header->gname,
sizeof(header->gname));
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_entry_set_gname(entry, tar->entry_gname.s);
/* Parse out device numbers only for char and block specials. */
if (header->typeflag[0] == '3' || header->typeflag[0] == '4') {
st->st_rdev = makedev(
tar_atol(header->rdevmajor, sizeof(header->rdevmajor)),
tar_atol(header->rdevminor, sizeof(header->rdevminor)));
}
tar->entry_bytes_remaining = st->st_size;
tar->entry_padding = 0x1ff & (-tar->entry_bytes_remaining);
return (0);
}
/*
* Parse the pax extended attributes record.
*
* Returns non-zero if there's an error in the data.
*/
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
pax_header(struct archive *a, struct tar *tar, struct archive_entry *entry,
struct stat *st, char *attr)
{
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
size_t attr_length, l, line_length;
char *line, *p;
wchar_t *key, *wp, *value;
int err, err2;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
attr_length = strlen(attr);
err = ARCHIVE_OK;
while (attr_length > 0) {
/* Parse decimal length field at start of line. */
line_length = 0;
l = attr_length;
line = p = attr; /* Record start of line. */
while (l>0) {
if (*p == ' ') {
p++;
l--;
break;
}
if (*p < '0' || *p > '9')
return (-1);
line_length *= 10;
line_length += *p - '0';
if (line_length > 999999) {
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Rejecting pax extended attribute > 1MB");
return (ARCHIVE_WARN);
}
p++;
l--;
}
if (line_length > attr_length)
return (0);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Ensure pax_entry buffer is big enough. */
if (tar->pax_entry_length <= line_length) {
if (tar->pax_entry_length <= 0)
tar->pax_entry_length = 1024;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
while (tar->pax_entry_length <= line_length + 1)
tar->pax_entry_length *= 2;
/* XXX Error handling here */
tar->pax_entry = realloc(tar->pax_entry,
tar->pax_entry_length * sizeof(wchar_t));
}
/* Decode UTF-8 to wchar_t, null-terminate result. */
if (utf8_decode(tar->pax_entry, p,
line_length - (p - attr) - 1)) {
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Invalid UTF8 character in pax extended attribute");
err = err_combine(err, ARCHIVE_WARN);
}
/* Null-terminate 'key' value. */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
key = tar->pax_entry;
if (key[0] == L'=')
return (-1);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
wp = wcschr(key, L'=');
if (wp == NULL) {
archive_set_error(a, ARCHIVE_ERRNO_MISC,
"Invalid pax extended attributes");
return (ARCHIVE_WARN);
}
*wp = 0;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Identify null-terminated 'value' portion. */
value = wp + 1;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Identify this attribute and set it in the entry. */
err2 = pax_attribute(entry, st, key, value);
err = err_combine(err, err2);
/* Skip to next line */
attr += line_length;
attr_length -= line_length;
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
return (err);
}
/*
* Parse a single key=value attribute. key/value pointers are
* assumed to point into reasonably long-lived storage.
*
* Note that POSIX reserves all-lowercase keywords. Vendor-specific
* extensions should always have keywords of the form "VENDOR.attribute"
* In particular, it's quite feasible to support many different
* vendor extensions here. I'm using "LIBARCHIVE" for extensions
* unique to this library (currently, there are none).
*
* Investigate other vendor-specific extensions, as well and see if
* any of them look useful.
*/
static int
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
pax_attribute(struct archive_entry *entry, struct stat *st,
wchar_t *key, wchar_t *value)
{
int64_t s;
long n;
switch (key[0]) {
case 'L':
/* Our extensions */
/* TODO: Handle arbitrary extended attributes... */
/*
if (strcmp(key, "LIBARCHIVE.xxxxxxx")==0)
archive_entry_set_xxxxxx(entry, value);
*/
break;
case 'S':
/* We support some keys used by the "star" archiver */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (wcscmp(key, L"SCHILY.acl.access")==0)
__archive_entry_acl_parse_w(entry, value,
ARCHIVE_ENTRY_ACL_TYPE_ACCESS);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
else if (wcscmp(key, L"SCHILY.acl.default")==0)
__archive_entry_acl_parse_w(entry, value,
ARCHIVE_ENTRY_ACL_TYPE_DEFAULT);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
else if (wcscmp(key, L"SCHILY.devmajor")==0)
st->st_rdev = makedev(tar_atol10(value, wcslen(value)),
minor(st->st_rdev));
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
else if (wcscmp(key, L"SCHILY.devminor")==0)
st->st_rdev = makedev(major(st->st_rdev),
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
tar_atol10(value, wcslen(value)));
else if (wcscmp(key, L"SCHILY.fflags")==0)
archive_entry_copy_fflags_text_w(entry, value);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
else if (wcscmp(key, L"SCHILY.nlink")==0)
st->st_nlink = tar_atol10(value, wcslen(value));
break;
case 'a':
if (wcscmp(key, L"atime")==0) {
pax_time(value, &s, &n);
st->st_atime = s;
ARCHIVE_STAT_SET_ATIME_NANOS(st, n);
}
break;
case 'c':
if (wcscmp(key, L"ctime")==0) {
pax_time(value, &s, &n);
st->st_ctime = s;
ARCHIVE_STAT_SET_CTIME_NANOS(st, n);
} else if (wcscmp(key, L"charset")==0) {
/* TODO: Publish charset information in entry. */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
} else if (wcscmp(key, L"comment")==0) {
/* TODO: Publish comment in entry. */
}
break;
case 'g':
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (wcscmp(key, L"gid")==0)
st->st_gid = tar_atol10(value, wcslen(value));
else if (wcscmp(key, L"gname")==0)
archive_entry_copy_gname_w(entry, value);
break;
case 'l':
/* pax interchange doesn't distinguish hardlink vs. symlink. */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (wcscmp(key, L"linkpath")==0) {
if (archive_entry_hardlink(entry))
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_entry_copy_hardlink_w(entry, value);
else
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
archive_entry_copy_symlink_w(entry, value);
}
break;
case 'm':
if (wcscmp(key, L"mtime")==0) {
pax_time(value, &s, &n);
st->st_mtime = s;
ARCHIVE_STAT_SET_MTIME_NANOS(st, n);
}
break;
case 'p':
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (wcscmp(key, L"path")==0)
archive_entry_copy_pathname_w(entry, value);
break;
case 'r':
/* POSIX has reserved 'realtime.*' */
break;
case 's':
/* POSIX has reserved 'security.*' */
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
/* Someday: if (wcscmp(key, L"security.acl")==0) { ... } */
if (wcscmp(key, L"size")==0)
st->st_size = tar_atol10(value, wcslen(value));
break;
case 'u':
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (wcscmp(key, L"uid")==0)
st->st_uid = tar_atol10(value, wcslen(value));
else if (wcscmp(key, L"uname")==0)
archive_entry_copy_uname_w(entry, value);
break;
}
return (0);
}
/*
* parse a decimal time value, which may include a fractional portion
*/
static void
pax_time(const wchar_t *p, int64_t *ps, long *pn)
{
char digit;
int64_t s;
unsigned long l;
int sign;
int64_t limit, last_digit_limit;
limit = max_int64 / 10;
last_digit_limit = max_int64 % 10;
s = 0;
sign = 1;
if (*p == '-') {
sign = -1;
p++;
}
while (*p >= '0' && *p <= '9') {
digit = *p - '0';
if (s > limit ||
(s == limit && digit > last_digit_limit)) {
s = max_uint64;
break;
}
s = (s * 10) + digit;
++p;
}
*ps = s * sign;
/* Calculate nanoseconds. */
*pn = 0;
if (*p != '.')
return;
l = 100000000UL;
do {
++p;
if (*p >= '0' && *p <= '9')
*pn += (*p - '0') * l;
else
break;
} while (l /= 10);
}
/*
* Parse GNU tar header
*/
static int
header_gnutar(struct archive *a, struct tar *tar, struct archive_entry *entry,
struct stat *st, const void *h)
{
const struct archive_entry_header_gnutar *header;
(void)a;
/*
* GNU header is like POSIX ustar, except 'prefix' is
* replaced with some other fields. This also means the
* filename is stored as in old-style archives.
*/
/* Grab fields common to all tar variants. */
header_common(a, tar, entry, st, h);
/* Copy filename over (to ensure null termination). */
header = h;
archive_strncpy(&(tar->entry_name), header->name,
sizeof(header->name));
archive_entry_set_pathname(entry, tar->entry_name.s);
/* Fields common to ustar and GNU */
/* XXX Can the following be factored out since it's common
* to ustar and gnu tar? Is it okay to move it down into
* header_common, perhaps? */
archive_strncpy(&(tar->entry_uname),
header->uname, sizeof(header->uname));
archive_entry_set_uname(entry, tar->entry_uname.s);
archive_strncpy(&(tar->entry_gname),
header->gname, sizeof(header->gname));
archive_entry_set_gname(entry, tar->entry_gname.s);
/* Parse out device numbers only for char and block specials */
if (header->typeflag[0] == '3' || header->typeflag[0] == '4')
st->st_rdev = makedev (
tar_atol(header->rdevmajor, sizeof(header->rdevmajor)),
tar_atol(header->rdevminor, sizeof(header->rdevminor)));
else
st->st_rdev = 0;
tar->entry_bytes_remaining = st->st_size;
tar->entry_padding = 0x1ff & (-tar->entry_bytes_remaining);
/* Grab GNU-specific fields. */
st->st_atime = tar_atol(header->atime, sizeof(header->atime));
st->st_ctime = tar_atol(header->ctime, sizeof(header->ctime));
if (header->realsize[0] != 0) {
st->st_size = tar_atol(header->realsize,
sizeof(header->realsize));
}
if (header->sparse[0].offset[0] != 0) {
gnu_read_sparse_data(a, tar, header);
} else {
if (header->isextended[0] != 0) {
/* XXX WTF? XXX */
}
}
return (0);
}
int
gnu_read_sparse_data(struct archive *a, struct tar *tar,
const struct archive_entry_header_gnutar *header)
{
ssize_t bytes_read;
const void *data;
struct extended {
struct gnu_sparse sparse[21];
char isextended[1];
char padding[7];
};
const struct extended *ext;
gnu_parse_sparse_data(a, tar, header->sparse, 4);
if (header->isextended[0] == 0)
return (ARCHIVE_OK);
do {
bytes_read = (a->compression_read_ahead)(a, &data, 512);
if (bytes_read < 0)
return (ARCHIVE_FATAL);
if (bytes_read < 512) {
archive_set_error(a, ARCHIVE_ERRNO_FILE_FORMAT,
"Truncated tar archive "
"detected while reading sparse file data");
return (ARCHIVE_FATAL);
}
(a->compression_read_consume)(a, 512);
ext = (const struct extended *)data;
gnu_parse_sparse_data(a, tar, ext->sparse, 21);
} while (ext->isextended[0] != 0);
if (tar->sparse_list != NULL)
tar->entry_offset = tar->sparse_list->offset;
return (ARCHIVE_OK);
}
void
gnu_parse_sparse_data(struct archive *a, struct tar *tar,
const struct gnu_sparse *sparse, int length)
{
struct sparse_block *last;
struct sparse_block *p;
(void)a; /* UNUSED */
last = tar->sparse_list;
while (last != NULL && last->next != NULL)
last = last->next;
while (length > 0 && sparse->offset[0] != 0) {
p = malloc(sizeof(*p));
memset(p, 0, sizeof(*p));
if (last != NULL)
last->next = p;
else
tar->sparse_list = p;
last = p;
p->offset = tar_atol(sparse->offset, sizeof(sparse->offset));
p->remaining =
tar_atol(sparse->numbytes, sizeof(sparse->numbytes));
sparse++;
length--;
}
}
/*-
* Convert text->integer.
*
* Traditional tar formats (including POSIX) specify base-8 for
* all of the standard numeric fields. This is a significant limitation
* in practice:
* = file size is limited to 8GB
* = rdevmajor and rdevminor are limited to 21 bits
* = uid/gid are limited to 21 bits
*
* There are two workarounds for this:
* = pax extended headers, which use variable-length string fields
* = GNU tar and STAR both allow either base-8 or base-256 in
* most fields. The high bit is set to indicate base-256.
*
* On read, this implementation supports both extensions.
*/
static int64_t
tar_atol(const char *p, unsigned char_cnt)
{
/*
* Technically, GNU tar considers a field to be in base-256
* only if the first byte is 0xff or 0x80.
*/
if (*p & 0x80)
return (tar_atol256(p, char_cnt));
return (tar_atol8(p, char_cnt));
}
/*
* Note that this implementation does not (and should not!) obey
* locale settings; you cannot simply substitute strtol here, since
* it does obey locale.
*/
static int64_t
tar_atol8(const char *p, unsigned char_cnt)
{
int64_t l, limit, last_digit_limit;
int digit, sign, base;
base = 8;
limit = max_int64 / base;
last_digit_limit = max_int64 % base;
while (*p == ' ' || *p == '\t')
p++;
if (*p == '-') {
sign = -1;
p++;
} else
sign = 1;
l = 0;
digit = *p - '0';
while (digit >= 0 && digit < base && char_cnt-- > 0) {
if (l>limit || (l == limit && digit > last_digit_limit)) {
l = max_uint64; /* Truncate on overflow. */
break;
}
l = (l * base) + digit;
digit = *++p - '0';
}
return (sign < 0) ? -l : l;
}
/*
* Note that this implementation does not (and should not!) obey
* locale settings; you cannot simply substitute strtol here, since
* it does obey locale.
*/
static int64_t
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
tar_atol10(const wchar_t *p, unsigned char_cnt)
{
int64_t l, limit, last_digit_limit;
int base, digit, sign;
base = 10;
limit = max_int64 / base;
last_digit_limit = max_int64 % base;
while (*p == ' ' || *p == '\t')
p++;
if (*p == '-') {
sign = -1;
p++;
} else
sign = 1;
l = 0;
digit = *p - '0';
while (digit >= 0 && digit < base && char_cnt-- > 0) {
if (l > limit || (l == limit && digit > last_digit_limit)) {
l = max_uint64; /* Truncate on overflow. */
break;
}
l = (l * base) + digit;
digit = *++p - '0';
}
return (sign < 0) ? -l : l;
}
/*
* Parse a base-256 integer. This is just a straight signed binary
* value in big-endian order, except that the high-order bit is
* ignored. Remember that "int64_t" may or may not be exactly 64
* bits; the implementation here tries to avoid making any assumptions
* about the actual size of an int64_t. It does assume we're using
* twos-complement arithmetic, though.
*/
static int64_t
tar_atol256(const char *_p, unsigned char_cnt)
{
int64_t l, upper_limit, lower_limit;
const unsigned char *p = _p;
upper_limit = max_int64 / 256;
lower_limit = min_int64 / 256;
/* Pad with 1 or 0 bits, depending on sign. */
if ((0x40 & *p) == 0x40)
l = (int64_t)-1;
else
l = 0;
l = (l << 6) | (0x3f & *p++);
while (--char_cnt > 0) {
if (l > upper_limit) {
l = max_int64; /* Truncate on overflow */
break;
} else if (l < lower_limit) {
l = min_int64;
break;
}
l = (l << 8) | (0xff & (int64_t)*p++);
}
return (l);
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
static int
utf8_decode(wchar_t *dest, const char *src, size_t length)
{
size_t n;
int err;
err = 0;
while(length > 0) {
n = UTF8_mbrtowc(dest, src, length);
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (n == 0)
break;
if (n > 8) {
/* Invalid byte encountered; try to keep going. */
*dest = L'?';
n = 1;
err = 1;
}
dest++;
src += n;
length -= n;
}
*dest++ = L'\0';
return (err);
}
/*
* Copied from FreeBSD libc/locale.
*/
static size_t
UTF8_mbrtowc(wchar_t *pwc, const char *s, size_t n)
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
{
int ch, i, len, mask;
unsigned long lbound, wch;
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
if (s == NULL)
/* Reset to initial shift state (no-op) */
return (0);
if (n == 0)
/* Incomplete multibyte sequence */
return ((size_t)-2);
/*
* Determine the number of octets that make up this character from
* the first octet, and a mask that extracts the interesting bits of
* the first octet.
*
* We also specify a lower bound for the character code to detect
* redundant, non-"shortest form" encodings. For example, the
* sequence C0 80 is _not_ a legal representation of the null
* character. This enforces a 1-to-1 mapping between character
* codes and their multibyte representations.
*/
ch = (unsigned char)*s;
if ((ch & 0x80) == 0) {
mask = 0x7f;
len = 1;
lbound = 0;
} else if ((ch & 0xe0) == 0xc0) {
mask = 0x1f;
len = 2;
lbound = 0x80;
} else if ((ch & 0xf0) == 0xe0) {
mask = 0x0f;
len = 3;
lbound = 0x800;
} else if ((ch & 0xf8) == 0xf0) {
mask = 0x07;
len = 4;
lbound = 0x10000;
} else if ((ch & 0xfc) == 0xf8) {
mask = 0x03;
len = 5;
lbound = 0x200000;
} else if ((ch & 0xfc) == 0xfc) {
mask = 0x01;
len = 6;
lbound = 0x4000000;
} else {
/*
* Malformed input; input is not UTF-8.
*/
errno = EILSEQ;
return ((size_t)-1);
}
if (n < (size_t)len)
/* Incomplete multibyte sequence */
return ((size_t)-2);
/*
* Decode the octet sequence representing the character in chunks
* of 6 bits, most significant first.
*/
wch = (unsigned char)*s++ & mask;
i = len;
while (--i != 0) {
if ((*s & 0xc0) != 0x80) {
/*
* Malformed input; bad characters in the middle
* of a character.
*/
errno = EILSEQ;
return ((size_t)-1);
}
wch <<= 6;
wch |= *s++ & 0x3f;
}
if (wch < lbound) {
/*
* Malformed input; redundant encoding.
*/
errno = EILSEQ;
return ((size_t)-1);
}
if (pwc != NULL) {
/* Assign the value to the output; out-of-range values
* just get truncated. */
*pwc = (wchar_t)wch;
#ifdef WCHAR_MAX
/*
* If platform has WCHAR_MAX, we can do something
* more sensible with out-of-range values.
*/
if (wch >= WCHAR_MAX)
*pwc = '?';
#endif
}
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
return (wch == L'\0' ? 0 : len);
}