d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3b36f8319d
freebsd-dev/include/linux/blkdev_compat.h

347 lines
11 KiB
C
Raw Normal View History

Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
/*
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
* Copyright (C) 2011 Lawrence Livermore National Security, LLC.
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* LLNL-CODE-403049.
*/
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#ifndef _ZFS_BLKDEV_H
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define _ZFS_BLKDEV_H
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#include <linux/blkdev.h>
#include <linux/elevator.h>
#ifndef HAVE_FMODE_T
typedef unsigned __bitwise__ fmode_t;
#endif /* HAVE_FMODE_T */
Fix synchronicity for ZVOLs. zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 09:11:38 +00:00
/*
* 2.6.36 API change,
* The blk_queue_flush() interface has replaced blk_queue_ordered()
* interface. However, while the old interface was available to all the
* new one is GPL-only. Thus if the GPL-only version is detected we
* implement our own trivial helper compatibility funcion. The hope is
* that long term this function will be opened up.
*/
#if defined(HAVE_BLK_QUEUE_FLUSH) && defined(HAVE_BLK_QUEUE_FLUSH_GPL_ONLY)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_flush __blk_queue_flush
Fix synchronicity for ZVOLs. zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 09:11:38 +00:00
static inline void
__blk_queue_flush(struct request_queue *q, unsigned int flags)
{
q->flush_flags = flags & (REQ_FLUSH | REQ_FUA);
}
#endif /* HAVE_BLK_QUEUE_FLUSH && HAVE_BLK_QUEUE_FLUSH_GPL_ONLY */
Linux 2.6.36 compat, blk_* macros removed Most of the blk_* macros were removed in 2.6.36. Ostensibly this was done to improve readability and allow easier grepping. However, from a portability stand point the macros are helpful. Therefore the needed macros are redefined here if they are missing from the kernel.
2010-11-11 00:38:14 +00:00
/*
* Most of the blk_* macros were removed in 2.6.36. Ostensibly this was
* done to improve readability and allow easier grepping. However, from
* a portability stand point the macros are helpful. Therefore the needed
* macros are redefined here if they are missing from the kernel.
*/
#ifndef blk_fs_request
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
Linux 2.6.36 compat, blk_* macros removed Most of the blk_* macros were removed in 2.6.36. Ostensibly this was done to improve readability and allow easier grepping. However, from a portability stand point the macros are helpful. Therefore the needed macros are redefined here if they are missing from the kernel.
2010-11-11 00:38:14 +00:00
#endif
Linux 2.6.27 compat, blk_queue_stackable() The blk_queue_stackable() queue flag was added in 2.6.27 to handle dm stacking drivers. Prior to this request stacking drivers were detected by checking (q->request_fn == NULL), for earlier kernels we revert to this legacy behavior.
2011-03-22 16:26:38 +00:00
/*
* 2.6.27 API change,
* The blk_queue_stackable() queue flag was added in 2.6.27 to handle dm
* stacking drivers. Prior to this request stacking drivers were detected
* by checking (q->request_fn == NULL), for earlier kernels we revert to
* this legacy behavior.
*/
#ifndef blk_queue_stackable
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_stackable(q) ((q)->request_fn == NULL)
Linux 2.6.27 compat, blk_queue_stackable() The blk_queue_stackable() queue flag was added in 2.6.27 to handle dm stacking drivers. Prior to this request stacking drivers were detected by checking (q->request_fn == NULL), for earlier kernels we revert to this legacy behavior.
2011-03-22 16:26:38 +00:00
#endif
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
/*
* 2.6.34 API change,
* The blk_queue_max_hw_sectors() function replaces blk_queue_max_sectors().
*/
#ifndef HAVE_BLK_QUEUE_MAX_HW_SECTORS
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_max_hw_sectors __blk_queue_max_hw_sectors
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
static inline void
__blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
blk_queue_max_sectors(q, max_hw_sectors);
}
#endif
/*
* 2.6.34 API change,
* The blk_queue_max_segments() function consolidates
* blk_queue_max_hw_segments() and blk_queue_max_phys_segments().
*/
#ifndef HAVE_BLK_QUEUE_MAX_SEGMENTS
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_max_segments __blk_queue_max_segments
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
static inline void
__blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
{
blk_queue_max_phys_segments(q, max_segments);
blk_queue_max_hw_segments(q, max_segments);
}
#endif
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#ifndef HAVE_GET_DISK_RO
static inline int
get_disk_ro(struct gendisk *disk)
{
int policy = 0;
if (disk->part[0])
policy = disk->part[0]->policy;
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
return (policy);
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
}
#endif /* HAVE_GET_DISK_RO */
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter. This patch creates BIO_BI_*(bio) macros to hide the differences. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 07:08:21 +00:00
#ifdef HAVE_BIO_BVEC_ITER
#define BIO_BI_SECTOR(bio) (bio)->bi_iter.bi_sector
#define BIO_BI_SIZE(bio) (bio)->bi_iter.bi_size
#define BIO_BI_IDX(bio) (bio)->bi_iter.bi_idx
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#define bio_for_each_segment4(bv, bvp, b, i) \
bio_for_each_segment((bv), (b), (i))
typedef struct bvec_iter bvec_iterator_t;
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter. This patch creates BIO_BI_*(bio) macros to hide the differences. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 07:08:21 +00:00
#else
#define BIO_BI_SECTOR(bio) (bio)->bi_sector
#define BIO_BI_SIZE(bio) (bio)->bi_size
#define BIO_BI_IDX(bio) (bio)->bi_idx
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#define bio_for_each_segment4(bv, bvp, b, i) \
bio_for_each_segment((bvp), (b), (i))
typedef int bvec_iterator_t;
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter. This patch creates BIO_BI_*(bio) macros to hide the differences. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 07:08:21 +00:00
#endif
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* Portable helper for correctly setting the FAILFAST flags. The
* correct usage has changed 3 times from 2.6.12 to 2.6.38.
*/
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
static inline void
bio_set_flags_failfast(struct block_device *bdev, int *flags)
{
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
#ifdef CONFIG_BUG
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
/*
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
* Disable FAILFAST for loopback devices because of the
* following incorrect BUG_ON() in loop_make_request().
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
* This support is also disabled for md devices because the
* test suite layers md devices on top of loopback devices.
* This may be removed when the loopback driver is fixed.
*
* BUG_ON(!lo || (rw != READ && rw != WRITE));
*/
if ((MAJOR(bdev->bd_dev) == LOOP_MAJOR) ||
(MAJOR(bdev->bd_dev) == MD_MAJOR))
return;
#ifdef BLOCK_EXT_MAJOR
if (MAJOR(bdev->bd_dev) == BLOCK_EXT_MAJOR)
return;
#endif /* BLOCK_EXT_MAJOR */
#endif /* CONFIG_BUG */
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <tim@onlight.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3386
2015-05-08 20:49:56 +00:00
#if defined(HAVE_BIO_RW_FAILFAST_DTD)
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
/* BIO_RW_FAILFAST_* preferred interface from 2.6.28 - 2.6.35 */
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
*flags |= (
(1 << BIO_RW_FAILFAST_DEV) |
(1 << BIO_RW_FAILFAST_TRANSPORT) |
(1 << BIO_RW_FAILFAST_DRIVER));
Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <tim@onlight.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3386
2015-05-08 20:49:56 +00:00
#elif defined(HAVE_REQ_FAILFAST_MASK)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
/*
* REQ_FAILFAST_* preferred interface from 2.6.36 - 2.6.xx,
* the BIO_* and REQ_* flags were unified under REQ_* flags.
*/
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
*flags |= REQ_FAILFAST_MASK;
Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <tim@onlight.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3386
2015-05-08 20:49:56 +00:00
#else
#error "Undefined block IO FAILFAST interface."
#endif
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
}
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* Maximum disk label length, it may be undefined for some kernels.
*/
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#ifndef DISK_NAME_LEN
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define DISK_NAME_LEN 32
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#endif /* DISK_NAME_LEN */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* 2.6.24 API change,
* The bio_end_io() prototype changed slightly. These are helper
* macro's to ensure the prototype and return value are handled.
*/
#ifdef HAVE_2ARGS_BIO_END_IO_T
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define BIO_END_IO_PROTO(fn, x, y, z) static void fn(struct bio *x, int z)
#define BIO_END_IO_RETURN(rc) return
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define BIO_END_IO_PROTO(fn, x, y, z) static int fn( \
struct bio *x, \
unsigned int y, \
int z)
#define BIO_END_IO_RETURN(rc) return rc
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#endif /* HAVE_2ARGS_BIO_END_IO_T */
/*
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
* 2.6.38 - 2.6.x API,
* blkdev_get_by_path()
* blkdev_put()
*
* 2.6.28 - 2.6.37 API,
* open_bdev_exclusive()
* close_bdev_exclusive()
*
* 2.6.12 - 2.6.27 API,
* open_bdev_excl()
* close_bdev_excl()
*
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
* Used to exclusively open a block device from within the kernel.
*/
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
#if defined(HAVE_BLKDEV_GET_BY_PATH)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_open(path, md, hld) blkdev_get_by_path(path, \
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
(md) | FMODE_EXCL, hld)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_close(bdev, md) blkdev_put(bdev, (md) | FMODE_EXCL)
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
#elif defined(HAVE_OPEN_BDEV_EXCLUSIVE)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_open(path, md, hld) open_bdev_exclusive(path, md, hld)
#define vdev_bdev_close(bdev, md) close_bdev_exclusive(bdev, md)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_open(path, md, hld) open_bdev_excl(path, md, hld)
#define vdev_bdev_close(bdev, md) close_bdev_excl(bdev)
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
#endif /* HAVE_BLKDEV_GET_BY_PATH | HAVE_OPEN_BDEV_EXCLUSIVE */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* 2.6.22 API change
* The function invalidate_bdev() lost it's second argument because
* it was unused.
*/
#ifdef HAVE_1ARG_INVALIDATE_BDEV
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_invalidate(bdev) invalidate_bdev(bdev)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_invalidate(bdev) invalidate_bdev(bdev, 1)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#endif /* HAVE_1ARG_INVALIDATE_BDEV */
Linux 2.6.26 compat, lookup_bdev() It's doubtful many people were impacted by this but commit 6c28567 accidentally broke ZFS builds for 2.6.26 and earlier kernels. This commit depends on the lookup_bdev() function which exists in 2.6.26 but wasn't exported until 2.6.27. The availability of the function isn't critical so a wrapper is introduced which returns ERR_PTR(-ENOTSUP) when the function isn't defined. This will have the effect of causing zvol_is_zvol() to always fail for 2.6.26 kernels. This in turn means vdevs will always get opened concurrently which is good for normal usage. This will only become an issue if your using a zvol as a vdev in another pool. In which case you really should be using a newer kernel anyway. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1205
2013-01-28 22:15:39 +00:00
/*
* 2.6.27 API change
* The function was exported for use, prior to this it existed by the
* symbol was not exported.
*/
#ifndef HAVE_LOOKUP_BDEV
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define lookup_bdev(path) ERR_PTR(-ENOTSUP)
Linux 2.6.26 compat, lookup_bdev() It's doubtful many people were impacted by this but commit 6c28567 accidentally broke ZFS builds for 2.6.26 and earlier kernels. This commit depends on the lookup_bdev() function which exists in 2.6.26 but wasn't exported until 2.6.27. The availability of the function isn't critical so a wrapper is introduced which returns ERR_PTR(-ENOTSUP) when the function isn't defined. This will have the effect of causing zvol_is_zvol() to always fail for 2.6.26 kernels. This in turn means vdevs will always get opened concurrently which is good for normal usage. This will only become an issue if your using a zvol as a vdev in another pool. In which case you really should be using a newer kernel anyway. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1205
2013-01-28 22:15:39 +00:00
#endif
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* 2.6.30 API change
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
* To ensure good performance preferentially use the physical block size
* for proper alignment. The physical size is supposed to be the internal
* sector size used by the device. This is often 4096 byte for AF devices,
* while a smaller 512 byte logical size is supported for compatibility.
*
* Unfortunately, many drives still misreport their physical sector size.
* For devices which are known to lie you may need to manually set this
* at pool creation time with 'zpool create -o ashift=12 ...'.
*
* When the physical block size interface isn't available, we fall back to
* the logical block size interface and then the older hard sector size.
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
*/
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
#ifdef HAVE_BDEV_PHYSICAL_BLOCK_SIZE
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_block_size(bdev) bdev_physical_block_size(bdev)
#else
#ifdef HAVE_BDEV_LOGICAL_BLOCK_SIZE
#define vdev_bdev_block_size(bdev) bdev_logical_block_size(bdev)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_block_size(bdev) bdev_hardsect_size(bdev)
#endif /* HAVE_BDEV_LOGICAL_BLOCK_SIZE */
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
#endif /* HAVE_BDEV_PHYSICAL_BLOCK_SIZE */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
/*
* 2.6.37 API change
* The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been
* introduced as a replacement for WRITE_BARRIER. This was done to
* allow richer semantics to be expressed to the block layer. It is
* the block layers responsibility to choose the correct way to
* implement these semantics.
Fix synchronicity for ZVOLs. zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 09:11:38 +00:00
*
* The existence of these flags implies that REQ_FLUSH an REQ_FUA are
* defined. Thus we can safely define VDEV_REQ_FLUSH and VDEV_REQ_FUA
* compatibility macros.
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
*/
#ifdef WRITE_FLUSH_FUA
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define VDEV_WRITE_FLUSH_FUA WRITE_FLUSH_FUA
#define VDEV_REQ_FLUSH REQ_FLUSH
#define VDEV_REQ_FUA REQ_FUA
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define VDEV_WRITE_FLUSH_FUA WRITE_BARRIER
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#ifdef HAVE_BIO_RW_BARRIER
#define VDEV_REQ_FLUSH (1 << BIO_RW_BARRIER)
#define VDEV_REQ_FUA (1 << BIO_RW_BARRIER)
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define VDEV_REQ_FLUSH REQ_HARDBARRIER
VDEV_REQ_FUA should be mapped to REQ_FUA Pre-2.6.37 kernels support REQ_FUA in request flags, but not in BIO flags. zvols are the only consumer of VDEV_REQ_FUA and since they are passed requests, they should be obey the REQ_FUA flag like later kernels. This optimization will only matter on 2.6.36 and 2.6.37 because the zvol rework changes things to use bio, where we no longer are able to distinguish on earlier kernels Signed-off-by: Richard Yao <ryao@gentoo.org>
2015-08-31 15:36:32 +00:00
#define VDEV_REQ_FUA REQ_FUA
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
#endif
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#endif
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
/*
* 2.6.32 API change
* Use the normal I/O patch for discards.
*/
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#ifdef QUEUE_FLAG_DISCARD
#ifdef HAVE_BIO_RW_DISCARD
#define VDEV_REQ_DISCARD (1 << BIO_RW_DISCARD)
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define VDEV_REQ_DISCARD REQ_DISCARD
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
#endif
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#else
#error "Allowing the build will cause discard requests to become writes "
"potentially triggering the DMU_MAX_ACCESS assertion. Please file a "
"an issue report at: https://github.com/zfsonlinux/zfs/issues/new"
#endif
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
Set zvol discard_granularity to the volblocksize. Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #862
2012-08-01 08:29:59 +00:00
/*
* 2.6.33 API change
* Discard granularity and alignment restrictions may now be set. For
* older kernels which do not support this it is safe to skip it.
*/
#ifdef HAVE_DISCARD_GRANULARITY
static inline void
blk_queue_discard_granularity(struct request_queue *q, unsigned int dg)
{
q->limits.discard_granularity = dg;
}
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_discard_granularity(x, dg) ((void)0)
Set zvol discard_granularity to the volblocksize. Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #862
2012-08-01 08:29:59 +00:00
#endif /* HAVE_DISCARD_GRANULARITY */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* Default Linux IO Scheduler,
* Setting the scheduler to noop will allow the Linux IO scheduler to
* still perform front and back merging, while leaving the request
* ordering and prioritization to the ZFS IO scheduler.
*/
#define VDEV_SCHEDULER "noop"
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
Fix hot spares The issue with hot spares in ZoL is because it opens all leaf vdevs exclusively (O_EXCL). On Linux, exclusive opens cause subsequent exclusive opens to fail with EBUSY. This could be resolved by not opening any of the devices exclusively, which is what Illumos does, but the additional protection offered by exclusive opens is desirable. It cleanly prevents you from accidentally adding an in-use non-ZFS device to your pool. To fix this we very slightly relaxed the usage of O_EXCL in the following ways. 1) Functions which open the device but only read had the O_EXCL flag removed and were updated to use O_RDONLY. 2) A common holder was added to the vdev disk code. This allow the ZFS code to internally open the device multiple times but non-ZFS callers may not. 3) An exception was added to make_disks() for hot spare when creating partition tables. For hot spare devices which are already opened exclusively we skip creating the partition table because this must already have been done when the disk was originally added as a hot spare. Additional minor changes include fixing check_in_use() to use a partition instead of a slice suffix. And is_spare() was moved above make_disks() to avoid adding a forward reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #250
2013-02-27 01:02:27 +00:00
/*
* A common holder for vdev_bdev_open() is used to relax the exclusive open
* semantics slightly. Internal vdev disk callers may pass VDEV_HOLDER to
* allow them to open the device multiple times. Other kernel callers and
* user space processes which don't pass this value will get EBUSY. This is
* currently required for the correct operation of hot spares.
*/
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define VDEV_HOLDER ((void *)0x2401de7)
Fix hot spares The issue with hot spares in ZoL is because it opens all leaf vdevs exclusively (O_EXCL). On Linux, exclusive opens cause subsequent exclusive opens to fail with EBUSY. This could be resolved by not opening any of the devices exclusively, which is what Illumos does, but the additional protection offered by exclusive opens is desirable. It cleanly prevents you from accidentally adding an in-use non-ZFS device to your pool. To fix this we very slightly relaxed the usage of O_EXCL in the following ways. 1) Functions which open the device but only read had the O_EXCL flag removed and were updated to use O_RDONLY. 2) A common holder was added to the vdev disk code. This allow the ZFS code to internally open the device multiple times but non-ZFS callers may not. 3) An exception was added to make_disks() for hot spare when creating partition tables. For hot spare devices which are already opened exclusively we skip creating the partition table because this must already have been done when the disk was originally added as a hot spare. Additional minor changes include fixing check_in_use() to use a partition instead of a slice suffix. And is_spare() was moved above make_disks() to avoid adding a forward reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #250
2013-02-27 01:02:27 +00:00
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#endif /* _ZFS_BLKDEV_H */
Reference in New Issue Copy Permalink