freebsd-dev/sys/dev/iicbus/sy8106a.c

303 lines
7.0 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Silergy Corp. SY8106A buck regulator
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/kernel.h>
#include <sys/reboot.h>
#include <sys/module.h>
#include <dev/iicbus/iicbus.h>
#include <dev/iicbus/iiconf.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/extres/regulator/regulator.h>
#include "iicbus_if.h"
#include "regdev_if.h"
#define VOUT1_SEL 0x01
#define SEL_GO (1 << 7)
#define SEL_VOLTAGE_MASK 0x7f
#define SEL_VOLTAGE_BASE 680000 /* uV */
#define SEL_VOLTAGE_STEP 10000 /* uV */
#define VOUT_COM 0x02
#define COM_DISABLE (1 << 0)
#define SYS_STATUS 0x06
static struct ofw_compat_data compat_data[] = {
{ "silergy,sy8106a", 1 },
{ NULL, 0 }
};
struct sy8106a_reg_sc {
struct regnode *regnode;
device_t base_dev;
phandle_t xref;
struct regnode_std_param *param;
};
struct sy8106a_softc {
uint16_t addr;
/* Regulator */
struct sy8106a_reg_sc *reg;
};
static int
sy8106a_read(device_t dev, uint8_t reg, uint8_t *data, uint8_t size)
{
struct sy8106a_softc *sc;
struct iic_msg msg[2];
sc = device_get_softc(dev);
msg[0].slave = sc->addr;
msg[0].flags = IIC_M_WR;
msg[0].len = 1;
msg[0].buf = &reg;
msg[1].slave = sc->addr;
msg[1].flags = IIC_M_RD;
msg[1].len = size;
msg[1].buf = data;
return (iicbus_transfer(dev, msg, 2));
}
static int
sy8106a_write(device_t dev, uint8_t reg, uint8_t val)
{
struct sy8106a_softc *sc;
struct iic_msg msg;
uint8_t buffer[2];
sc = device_get_softc(dev);
buffer[0] = reg;
buffer[1] = val;
msg.slave = sc->addr;
msg.flags = IIC_M_WR;
msg.len = 2;
msg.buf = buffer;
return (iicbus_transfer(dev, &msg, 1));
}
static int
sy8106a_regnode_init(struct regnode *regnode)
{
return (0);
}
static int
sy8106a_regnode_enable(struct regnode *regnode, bool enable, int *udelay)
{
struct sy8106a_reg_sc *sc;
uint8_t val;
sc = regnode_get_softc(regnode);
sy8106a_read(sc->base_dev, VOUT_COM, &val, 1);
if (enable)
val &= ~COM_DISABLE;
else
val |= COM_DISABLE;
sy8106a_write(sc->base_dev, VOUT_COM, val);
*udelay = sc->param->ramp_delay;
return (0);
}
static int
sy8106a_regnode_set_voltage(struct regnode *regnode, int min_uvolt,
int max_uvolt, int *udelay)
{
struct sy8106a_reg_sc *sc;
int cur_uvolt;
uint8_t val, oval;
sc = regnode_get_softc(regnode);
/* Get current voltage */
sy8106a_read(sc->base_dev, VOUT1_SEL, &oval, 1);
cur_uvolt = (oval & SEL_VOLTAGE_MASK) * SEL_VOLTAGE_STEP +
SEL_VOLTAGE_BASE;
/* Set new voltage */
val = SEL_GO | ((min_uvolt - SEL_VOLTAGE_BASE) / SEL_VOLTAGE_STEP);
sy8106a_write(sc->base_dev, VOUT1_SEL, val);
/* Time to delay is based on the number of voltage steps */
*udelay = sc->param->ramp_delay *
(abs(cur_uvolt - min_uvolt) / SEL_VOLTAGE_STEP);
return (0);
}
static int
sy8106a_regnode_get_voltage(struct regnode *regnode, int *uvolt)
{
struct sy8106a_reg_sc *sc;
uint8_t val;
sc = regnode_get_softc(regnode);
sy8106a_read(sc->base_dev, VOUT1_SEL, &val, 1);
*uvolt = (val & SEL_VOLTAGE_MASK) * SEL_VOLTAGE_STEP +
SEL_VOLTAGE_BASE;
return (0);
}
static regnode_method_t sy8106a_regnode_methods[] = {
/* Regulator interface */
REGNODEMETHOD(regnode_init, sy8106a_regnode_init),
REGNODEMETHOD(regnode_enable, sy8106a_regnode_enable),
REGNODEMETHOD(regnode_set_voltage, sy8106a_regnode_set_voltage),
REGNODEMETHOD(regnode_get_voltage, sy8106a_regnode_get_voltage),
REGNODEMETHOD_END
};
DEFINE_CLASS_1(sy8106a_regnode, sy8106a_regnode_class, sy8106a_regnode_methods,
sizeof(struct sy8106a_reg_sc), regnode_class);
static struct sy8106a_reg_sc *
sy8106a_reg_attach(device_t dev, phandle_t node)
{
struct sy8106a_reg_sc *reg_sc;
struct regnode_init_def initdef;
struct regnode *regnode;
memset(&initdef, 0, sizeof(initdef));
regulator_parse_ofw_stdparam(dev, node, &initdef);
initdef.id = 0;
initdef.ofw_node = node;
regnode = regnode_create(dev, &sy8106a_regnode_class, &initdef);
if (regnode == NULL) {
device_printf(dev, "cannot create regulator\n");
return (NULL);
}
reg_sc = regnode_get_softc(regnode);
reg_sc->regnode = regnode;
reg_sc->base_dev = dev;
reg_sc->xref = OF_xref_from_node(node);
reg_sc->param = regnode_get_stdparam(regnode);
regnode_register(regnode);
return (reg_sc);
}
static int
sy8106a_regdev_map(device_t dev, phandle_t xref, int ncells, pcell_t *cells,
intptr_t *num)
{
struct sy8106a_softc *sc;
sc = device_get_softc(dev);
if (sc->reg->xref != xref)
return (ENXIO);
*num = 0;
return (0);
}
static int
sy8106a_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
device_set_desc(dev, "Silergy SY8106A regulator");
return (BUS_PROBE_DEFAULT);
}
static int
sy8106a_attach(device_t dev)
{
struct sy8106a_softc *sc;
phandle_t node;
sc = device_get_softc(dev);
node = ofw_bus_get_node(dev);
sc->addr = iicbus_get_addr(dev);
sc->reg = sy8106a_reg_attach(dev, node);
if (sc->reg == NULL) {
device_printf(dev, "cannot attach regulator\n");
return (ENXIO);
}
return (0);
}
static device_method_t sy8106a_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sy8106a_probe),
DEVMETHOD(device_attach, sy8106a_attach),
/* Regdev interface */
DEVMETHOD(regdev_map, sy8106a_regdev_map),
DEVMETHOD_END
};
static driver_t sy8106a_driver = {
"sy8106a",
sy8106a_methods,
sizeof(struct sy8106a_softc),
};
static devclass_t sy8106a_devclass;
EARLY_DRIVER_MODULE(sy8106a, iicbus, sy8106a_driver, sy8106a_devclass, 0, 0,
BUS_PASS_RESOURCE);
MODULE_VERSION(sy8106a, 1);
MODULE_DEPEND(sy8106a, iicbus, 1, 1, 1);
IICBUS_FDT_PNP_INFO(compat_data);