freebsd-dev/sys/dev/iicbus/syr827.c

327 lines
7.7 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
* Copyright (c) 2018 Emmanuel Vadot <manu@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/kernel.h>
#include <sys/reboot.h>
#include <sys/module.h>
#include <dev/iicbus/iicbus.h>
#include <dev/iicbus/iiconf.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/extres/regulator/regulator.h>
#include "iicbus_if.h"
#include "regdev_if.h"
#define VSEL0 0x00
#define VSEL1 0x01
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_NSEL_MASK 0x3F
#define VSEL_VOLTAGE_BASE 712500 /* uV */
#define VSEL_VOLTAGE_STEP 12500 /* uV */
#define ID1 0x03
#define ID1_VENDOR_MASK 0xE0
#define ID1_VENDOR_SHIFT 5
#define ID1_DIE_MASK 0xF
#define ID2 0x4
#define ID2_DIE_REV_MASK 0xF
static struct ofw_compat_data compat_data[] = {
{ "silergy,syr827", 1 },
{ NULL, 0 }
};
struct syr827_reg_sc {
struct regnode *regnode;
device_t base_dev;
phandle_t xref;
struct regnode_std_param *param;
int volt_reg;
int suspend_reg;
};
struct syr827_softc {
uint16_t addr;
struct intr_config_hook intr_hook;
/* Regulator */
struct syr827_reg_sc *reg;
};
static int
syr827_read(device_t dev, uint8_t reg, uint8_t *data, uint8_t size)
{
return (iicdev_readfrom(dev, reg, data, size, IIC_INTRWAIT));
}
static int
syr827_write(device_t dev, uint8_t reg, uint8_t val)
{
return (iicdev_writeto(dev, reg, &val, 1, IIC_INTRWAIT));
}
static int
syr827_regnode_init(struct regnode *regnode)
{
return (0);
}
static int
syr827_regnode_enable(struct regnode *regnode, bool enable, int *udelay)
{
struct syr827_reg_sc *sc;
uint8_t val;
sc = regnode_get_softc(regnode);
syr827_read(sc->base_dev, sc->volt_reg, &val, 1);
if (enable)
val &= ~VSEL_BUCK_EN;
else
val |= VSEL_BUCK_EN;
syr827_write(sc->base_dev, sc->volt_reg, val);
*udelay = sc->param->ramp_delay;
return (0);
}
static int
syr827_regnode_set_voltage(struct regnode *regnode, int min_uvolt,
int max_uvolt, int *udelay)
{
struct syr827_reg_sc *sc;
int cur_uvolt;
uint8_t val;
sc = regnode_get_softc(regnode);
/* Get current voltage */
syr827_read(sc->base_dev, sc->volt_reg, &val, 1);
cur_uvolt = (val & VSEL_NSEL_MASK) * VSEL_VOLTAGE_STEP +
VSEL_VOLTAGE_BASE;
/* Set new voltage */
val &= ~VSEL_NSEL_MASK;
val |= ((min_uvolt - VSEL_VOLTAGE_BASE) / VSEL_VOLTAGE_STEP);
syr827_write(sc->base_dev, sc->volt_reg, val);
/* Time to delay is based on the number of voltage steps */
*udelay = sc->param->ramp_delay *
(abs(cur_uvolt - min_uvolt) / VSEL_VOLTAGE_STEP);
return (0);
}
static int
syr827_regnode_get_voltage(struct regnode *regnode, int *uvolt)
{
struct syr827_reg_sc *sc;
uint8_t val;
sc = regnode_get_softc(regnode);
syr827_read(sc->base_dev, sc->volt_reg, &val, 1);
*uvolt = (val & VSEL_NSEL_MASK) * VSEL_VOLTAGE_STEP +
VSEL_VOLTAGE_BASE;
return (0);
}
static regnode_method_t syr827_regnode_methods[] = {
/* Regulator interface */
REGNODEMETHOD(regnode_init, syr827_regnode_init),
REGNODEMETHOD(regnode_enable, syr827_regnode_enable),
REGNODEMETHOD(regnode_set_voltage, syr827_regnode_set_voltage),
REGNODEMETHOD(regnode_get_voltage, syr827_regnode_get_voltage),
REGNODEMETHOD_END
};
DEFINE_CLASS_1(syr827_regnode, syr827_regnode_class, syr827_regnode_methods,
sizeof(struct syr827_reg_sc), regnode_class);
static struct syr827_reg_sc *
syr827_reg_attach(device_t dev, phandle_t node)
{
struct syr827_reg_sc *reg_sc;
struct regnode_init_def initdef;
struct regnode *regnode;
int suspend_reg;
memset(&initdef, 0, sizeof(initdef));
regulator_parse_ofw_stdparam(dev, node, &initdef);
initdef.id = 0;
initdef.ofw_node = node;
regnode = regnode_create(dev, &syr827_regnode_class, &initdef);
if (regnode == NULL) {
device_printf(dev, "cannot create regulator\n");
return (NULL);
}
reg_sc = regnode_get_softc(regnode);
reg_sc->regnode = regnode;
reg_sc->base_dev = dev;
reg_sc->xref = OF_xref_from_node(node);
reg_sc->param = regnode_get_stdparam(regnode);
if (OF_getencprop(node, "fcs,suspend-voltage-selector", &suspend_reg,
sizeof(uint32_t)) <= 0)
suspend_reg = 0;
switch (suspend_reg) {
case 0:
reg_sc->suspend_reg = VSEL0;
reg_sc->volt_reg = VSEL1;
break;
case 1:
reg_sc->suspend_reg = VSEL1;
reg_sc->volt_reg = VSEL0;
break;
}
regnode_register(regnode);
return (reg_sc);
}
static int
syr827_regdev_map(device_t dev, phandle_t xref, int ncells, pcell_t *cells,
intptr_t *num)
{
struct syr827_softc *sc;
sc = device_get_softc(dev);
if (sc->reg->xref != xref)
return (ENXIO);
*num = 0;
return (0);
}
static int
syr827_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
device_set_desc(dev, "Silergy SYR827 regulator");
return (BUS_PROBE_DEFAULT);
}
static void
syr827_start(void *pdev)
{
struct syr827_softc *sc;
device_t dev;
uint8_t val;
dev = pdev;
sc = device_get_softc(dev);
if (bootverbose) {
syr827_read(dev, ID1, &val, 1);
device_printf(dev, "Vendor ID: %x, DIE ID: %x\n",
(val & ID1_VENDOR_MASK) >> ID1_VENDOR_SHIFT,
val & ID1_DIE_MASK);
syr827_read(dev, ID2, &val, 1);
device_printf(dev, "DIE Rev: %x\n", val & ID2_DIE_REV_MASK);
}
config_intrhook_disestablish(&sc->intr_hook);
}
static int
syr827_attach(device_t dev)
{
struct syr827_softc *sc;
phandle_t node;
sc = device_get_softc(dev);
node = ofw_bus_get_node(dev);
sc->addr = iicbus_get_addr(dev);
sc->intr_hook.ich_func = syr827_start;
sc->intr_hook.ich_arg = dev;
if (config_intrhook_establish(&sc->intr_hook) != 0)
return (ENOMEM);
sc->reg = syr827_reg_attach(dev, node);
if (sc->reg == NULL) {
device_printf(dev, "cannot attach regulator\n");
return (ENXIO);
}
return (0);
}
static device_method_t syr827_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, syr827_probe),
DEVMETHOD(device_attach, syr827_attach),
/* Regdev interface */
DEVMETHOD(regdev_map, syr827_regdev_map),
DEVMETHOD_END
};
static driver_t syr827_driver = {
"syr827",
syr827_methods,
sizeof(struct syr827_softc),
};
static devclass_t syr827_devclass;
EARLY_DRIVER_MODULE(syr827, iicbus, syr827_driver, syr827_devclass, 0, 0,
BUS_PASS_RESOURCE);
MODULE_VERSION(syr827, 1);
MODULE_DEPEND(syr827, iicbus, 1, 1, 1);
IICBUS_FDT_PNP_INFO(compat_data);