d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3e7865bcfc
freebsd-dev/sys/dev/acpica/acpi_pcib_acpi.c

377 lines
12 KiB
C
Raw Normal View History

Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Fix SCM ID's.
2005-03-02 09:22:34 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
#include <sys/kernel.h>
Style fixes.
2004-05-28 16:38:37 +00:00
#include <sys/malloc.h>
Add missing <sys/module.h> includes
2004-05-30 20:08:47 +00:00
#include <sys/module.h>
Make the lower range of the memory area 0x80000000 again. Also introduce hw.{pci,acpi}.host_mem_start tunable to change this. MFC: ASAP
2004-10-11 21:10:23 +00:00
#include <sys/sysctl.h>
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
Import ACPICA 20090521.
2009-06-05 18:44:36 +00:00
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
#include <dev/acpica/acpivar.h>
#include <machine/pci_cfgreg.h>
Prefer new location of pci include files (which have only been in the tree for two or more years now), except in a few places where there's code to be compatible with older versions of FreeBSD.
2003-08-22 06:06:16 +00:00
#include <dev/pci/pcivar.h>
#include <dev/pci/pcib_private.h>
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
#include "pcib_if.h"
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
#include <dev/acpica/acpi_pcibvar.h>
Style fixes.
2004-05-28 16:38:37 +00:00
/* Hooks for the ACPI CA debugging infrastructure. */
Update for new debug layer constant names in the ACPI CA 20010615 import.
2001-06-29 20:32:29 +00:00
#define _COMPONENT ACPI_BUS
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
ACPI_MODULE_NAME("PCI_ACPI")
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc {
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
device_t ap_dev;
ACPI_HANDLE ap_handle;
Move flags into a private ivar so it can't collide with device flags. Unify the code to disable GPEs with the enable code. Shutdown is handled the same way. ACPI now does all wake/sleep prep for child devices so now they no longer need to call external functions in the suspend/resume path. Add the flags to non-ACPI busses (i.e., pci).
2004-06-30 16:08:03 +00:00
int ap_flags;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
int ap_segment; /* analagous to Alpha 'hose' */
int ap_bus; /* bios-assigned bus number */
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
ACPI_BUFFER ap_prt; /* interrupt routing table */
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
};
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static int acpi_pcib_acpi_probe(device_t bus);
static int acpi_pcib_acpi_attach(device_t bus);
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
static int acpi_pcib_acpi_resume(device_t bus);
Style fixes.
2004-05-28 16:38:37 +00:00
static int acpi_pcib_read_ivar(device_t dev, device_t child,
int which, uintptr_t *result);
static int acpi_pcib_write_ivar(device_t dev, device_t child,
int which, uintptr_t value);
pcib_read_config and pcib_write_config take u_int params.
2009-02-05 18:40:42 +00:00
static uint32_t acpi_pcib_read_config(device_t dev, u_int bus,
u_int slot, u_int func, u_int reg, int bytes);
static void acpi_pcib_write_config(device_t dev, u_int bus,
u_int slot, u_int func, u_int reg, uint32_t data,
int bytes);
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static int acpi_pcib_acpi_route_interrupt(device_t pcib,
Style fixes.
2004-05-28 16:38:37 +00:00
device_t dev, int pin);
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
static int acpi_pcib_alloc_msi(device_t pcib, device_t dev,
int count, int maxcount, int *irqs);
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
static int acpi_pcib_map_msi(device_t pcib, device_t dev,
int irq, uint64_t *addr, uint32_t *data);
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
static int acpi_pcib_alloc_msix(device_t pcib, device_t dev,
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
int *irq);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
static struct resource *acpi_pcib_acpi_alloc_resource(device_t dev,
Whitespace cleanup
2004-10-31 15:02:53 +00:00
device_t child, int type, int *rid,
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
u_long start, u_long end, u_long count,
u_int flags);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static device_method_t acpi_pcib_acpi_methods[] = {
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/* Device interface */
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DEVMETHOD(device_probe, acpi_pcib_acpi_probe),
DEVMETHOD(device_attach, acpi_pcib_acpi_attach),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
DEVMETHOD(device_resume, acpi_pcib_acpi_resume),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar),
DEVMETHOD(bus_write_ivar, acpi_pcib_write_ivar),
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
DEVMETHOD(bus_alloc_resource, acpi_pcib_acpi_alloc_resource),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
Whitespace cleanup
2004-10-31 15:02:53 +00:00
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* pcib interface */
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DEVMETHOD(pcib_maxslots, pcib_maxslots),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
DEVMETHOD(pcib_read_config, acpi_pcib_read_config),
DEVMETHOD(pcib_write_config, acpi_pcib_write_config),
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DEVMETHOD(pcib_route_interrupt, acpi_pcib_acpi_route_interrupt),
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
DEVMETHOD(pcib_alloc_msi, acpi_pcib_alloc_msi),
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
DEVMETHOD(pcib_release_msi, pcib_release_msi),
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
DEVMETHOD(pcib_alloc_msix, acpi_pcib_alloc_msix),
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
DEVMETHOD(pcib_release_msix, pcib_release_msix),
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
DEVMETHOD(pcib_map_msi, acpi_pcib_map_msi),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{0, 0}
};
- Make pcib_devclass private to sys/dev/pci/pci_pci.c and change all the various pcib drivers to use their own private devclass_t variables for their modules. - Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib drivers while I'm here.
2006-01-06 19:22:19 +00:00
static devclass_t pcib_devclass;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
- Make pcib_devclass private to sys/dev/pci/pci_pci.c and change all the various pcib drivers to use their own private devclass_t variables for their modules. - Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib drivers while I'm here.
2006-01-06 19:22:19 +00:00
DEFINE_CLASS_0(pcib, acpi_pcib_acpi_driver, acpi_pcib_acpi_methods,
sizeof(struct acpi_hpcib_softc));
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DRIVER_MODULE(acpi_pcib, acpi, acpi_pcib_acpi_driver, pcib_devclass, 0, 0);
Add MODULE_DEPEND entries so some of these drivers can eventually be loaded separately from ACPI (i.e., embedded use).
2004-04-09 18:14:32 +00:00
MODULE_DEPEND(acpi_pcib, acpi, 1, 1, 1);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
static int
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
acpi_pcib_acpi_probe(device_t dev)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
Use the acpi_id_probe() method instead of acpi_MatchHid(), which is now static.
2004-06-29 19:02:27 +00:00
static char *pcib_ids[] = { "PNP0A03", NULL };
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
Use the acpi_id_probe() method instead of acpi_MatchHid(), which is now static.
2004-06-29 19:02:27 +00:00
if (acpi_disabled("pcib") ||
ACPI_ID_PROBE(device_get_parent(dev), dev, pcib_ids) == NULL)
return (ENXIO);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
Use the acpi_id_probe() method instead of acpi_MatchHid(), which is now static.
2004-06-29 19:02:27 +00:00
if (pci_cfgregopen() == 0)
return (ENXIO);
device_set_desc(dev, "ACPI Host-PCI bridge");
return (0);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
static int
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
acpi_pcib_acpi_attach(device_t dev)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc *sc;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
ACPI_STATUS status;
Consistently use the BSD u_int and u_short instead of the SYSV uint and ushort. In most of these files, there was a mixture of both styles and this change just makes them self-consistent. Requested by: bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
u_int addr, slot, func, busok;
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
uint8_t busno;
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
Brutally deal with __func__ being 'const char *' on gcc-3.1.
2002-05-19 06:16:47 +00:00
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
sc = device_get_softc(dev);
sc->ap_dev = dev;
sc->ap_handle = acpi_get_handle(dev);
/*
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
* Get our base bus number by evaluating _BBN.
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
* If this doesn't work, we assume we're bus number 0.
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*
Whitespace cleanup
2004-10-31 15:02:53 +00:00
* XXX note that it may also not exist in the case where we are
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
* meant to use a private configuration space mechanism for this bus,
* so we should dig out our resources and check to see if we have
* anything like that. How do we do this?
Update to work with the new ACPI CA snapshot. - Use ACPI_PHYSICAL_ADDRESS - RSDT -> XSDT - FACP -> FADT - No APIC table support - Don't install a global EC handler; this has bad side-effects (it invokes _REG in *all* EC spaces in the namespace!) - Check for PCI bus instances already existing before adding them
2000-12-01 10:18:57 +00:00
* XXX If we have the requisite information, and if we don't think the
* default PCI configuration space handlers can deal with this bus,
* we should attach our own handler.
* XXX invoke _REG on this for the PCI config space address space?
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
* XXX It seems many BIOS's with multiple Host-PCI bridges do not set
* _BBN correctly. They set _BBN to zero for all bridges. Thus,
* if _BBN is zero and pcib0 already exists, we try to read our
* bus number from the configuration registers at address _ADR.
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*/
Change to acpi_{Get,Set}Integer to provide both methods. Convert all callers to the new API. Submitted by: Mark Santcroos <marks@ripe.net>
2004-03-03 18:34:42 +00:00
status = acpi_GetInteger(sc->ap_handle, "_BBN", &sc->ap_bus);
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
if (ACPI_FAILURE(status)) {
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
if (status != AE_NOT_FOUND) {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
device_printf(dev, "could not evaluate _BBN - %s\n",
AcpiFormatException(status));
Style fixes.
2004-05-28 16:38:37 +00:00
return_VALUE (ENXIO);
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
} else {
Style fixes.
2004-05-28 16:38:37 +00:00
/* If it's not found, assume 0. */
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
sc->ap_bus = 0;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
}
/*
* If the bus is zero and pcib0 already exists, read the bus number
* via PCI config space.
*/
busok = 1;
if (sc->ap_bus == 0 && devclass_get_device(pcib_devclass, 0) != dev) {
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
busok = 0;
Change to acpi_{Get,Set}Integer to provide both methods. Convert all callers to the new API. Submitted by: Mark Santcroos <marks@ripe.net>
2004-03-03 18:34:42 +00:00
status = acpi_GetInteger(sc->ap_handle, "_ADR", &addr);
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
if (ACPI_FAILURE(status)) {
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
if (status != AE_NOT_FOUND) {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
device_printf(dev, "could not evaluate _ADR - %s\n",
AcpiFormatException(status));
Style fixes.
2004-05-28 16:38:37 +00:00
return_VALUE (ENXIO);
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
} else
Style fixes.
2004-05-28 16:38:37 +00:00
device_printf(dev, "couldn't find _ADR\n");
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
} else {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
/* XXX: We assume bus 0. */
Add a couple of macros to extract the PCI slot (device) and function from an ACPI _ADR value and use that rather than inlining the same shifts and masks everywhere.
2004-09-22 15:46:16 +00:00
slot = ACPI_ADR_PCI_SLOT(addr);
func = ACPI_ADR_PCI_FUNC(addr);
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
if (bootverbose)
device_printf(dev, "reading config registers from 0:%d:%d\n",
slot, func);
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
if (host_pcib_get_busno(pci_cfgregread, 0, slot, func, &busno) == 0)
Style fixes.
2004-05-28 16:38:37 +00:00
device_printf(dev, "couldn't read bus number from cfg space\n");
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
else {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
sc->ap_bus = busno;
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
busok = 1;
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
}
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
}
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
/*
* If nothing else worked, hope that ACPI at least lays out the
* host-PCI bridges in order and that as a result our unit number
* is actually our bus number. There are several reasons this
* might not be true.
*/
if (busok == 0) {
sc->ap_bus = device_get_unit(dev);
device_printf(dev, "trying bus number %d\n", sc->ap_bus);
}
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/*
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
* Get our segment number by evaluating _SEG
* It's OK for this to not exist.
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*/
Style fixes.
2004-05-28 16:38:37 +00:00
status = acpi_GetInteger(sc->ap_handle, "_SEG", &sc->ap_segment);
if (ACPI_FAILURE(status)) {
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
if (status != AE_NOT_FOUND) {
Style fixes.
2004-05-28 16:38:37 +00:00
device_printf(dev, "could not evaluate _SEG - %s\n",
AcpiFormatException(status));
return_VALUE (ENXIO);
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
}
Style fixes.
2004-05-28 16:38:37 +00:00
/* If it's not found, assume 0. */
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
sc->ap_segment = 0;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_bus));
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
static int
acpi_pcib_acpi_resume(device_t dev)
{
Re-work ACPI PCI IRQ routing (_PRT, link devices). The old approach was incomplete in that the PRT routing was not aware of link programming. Fix this by doing all routing through the link devices. The new algorithm for setting up links is: 1. Read _CRS to get current setting. If invalid (not in _PRS), then set to 0. 2. Attempt to call _DIS on the link. If successful, mark the link as not routed. Otherwise, assume it still is. Then when a routing request occurs: 3. Update weights for all IRQs 4. Attempt to route the initial IRQ if valid 5. If that fails, walk through the sorted list, attempting to route IRQs. 6. Configure the trigger/polarity based on _PRS. Other changes: * Add acpi_pci_find_prt() to look up the PRT entry for a given device and acpi_pci_link_route() to select/route the best IRQ for it. * Remove duplicated code in acpi_pcib_route_interrupt() that picked the first IRQ from _PRS. * Remove unneeded arguments from acpi_pcib_resume() and friends. * Ignore _STA on link devices but report if it seems strange. * Add a prt_source handle to the PRT structure since the ACPI struct ACPI_PCI_ROUTING_TABLE uses a fixed-size entry for it. We'll need to dynamically size this object if we want to use it the same way ACPI-CA does. Null-terminate the source. Tested by: Luo Hong <luohong99_at_mails.tsinghua.edu.cn>, Jeffrey Katcher <jmkatcher_at_yahoo.com> Info from: jhb, Len Brown (Intel)
2004-08-11 14:52:50 +00:00
return (acpi_pcib_resume(dev));
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
}
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
/*
* Support for standard PCI bridge ivars.
*/
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
static int
acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc *sc = device_get_softc(dev);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
switch (which) {
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
case PCIB_IVAR_DOMAIN:
*result = 0;
return (0);
Style fixes.
2004-05-28 16:38:37 +00:00
case PCIB_IVAR_BUS:
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*result = sc->ap_bus;
Style fixes.
2004-05-28 16:38:37 +00:00
return (0);
case ACPI_IVAR_HANDLE:
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
*result = (uintptr_t)sc->ap_handle;
Style fixes.
2004-05-28 16:38:37 +00:00
return (0);
Move flags into a private ivar so it can't collide with device flags. Unify the code to disable GPEs with the enable code. Shutdown is handled the same way. ACPI now does all wake/sleep prep for child devices so now they no longer need to call external functions in the suspend/resume path. Add the flags to non-ACPI busses (i.e., pci).
2004-06-30 16:08:03 +00:00
case ACPI_IVAR_FLAGS:
*result = (uintptr_t)sc->ap_flags;
return (0);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Style fixes.
2004-05-28 16:38:37 +00:00
return (ENOENT);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
static int
acpi_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
Whitespace cleanup
2004-10-31 15:02:53 +00:00
struct acpi_hpcib_softc *sc = device_get_softc(dev);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
switch (which) {
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
case PCIB_IVAR_DOMAIN:
return (EINVAL);
Style fixes.
2004-05-28 16:38:37 +00:00
case PCIB_IVAR_BUS:
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
sc->ap_bus = value;
Style fixes.
2004-05-28 16:38:37 +00:00
return (0);
Move flags into a private ivar so it can't collide with device flags. Unify the code to disable GPEs with the enable code. Shutdown is handled the same way. ACPI now does all wake/sleep prep for child devices so now they no longer need to call external functions in the suspend/resume path. Add the flags to non-ACPI busses (i.e., pci).
2004-06-30 16:08:03 +00:00
case ACPI_IVAR_HANDLE:
sc->ap_handle = (ACPI_HANDLE)value;
return (0);
case ACPI_IVAR_FLAGS:
sc->ap_flags = (int)value;
return (0);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Style fixes.
2004-05-28 16:38:37 +00:00
return (ENOENT);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Style fixes.
2004-05-28 16:38:37 +00:00
static uint32_t
pcib_read_config and pcib_write_config take u_int params.
2009-02-05 18:40:42 +00:00
acpi_pcib_read_config(device_t dev, u_int bus, u_int slot, u_int func,
u_int reg, int bytes)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
Style fixes.
2004-05-28 16:38:37 +00:00
return (pci_cfgregread(bus, slot, func, reg, bytes));
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
static void
pcib_read_config and pcib_write_config take u_int params.
2009-02-05 18:40:42 +00:00
acpi_pcib_write_config(device_t dev, u_int bus, u_int slot, u_int func,
u_int reg, uint32_t data, int bytes)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
pci_cfgregwrite(bus, slot, func, reg, data, bytes);
}
static int
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
acpi_pcib_acpi_route_interrupt(device_t pcib, device_t dev, int pin)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
Rework the ACPI PCI link code. - Use a new-bus device driver for the ACPI PCI link devices. The devices are called pci_linkX. The driver includes suspend/resume support so that the ACPI bridge drivers no longer have to poke the links to get them to handle suspend/resume. Also, the code to handle which IRQs a link is routed to and choosing an IRQ when a link is not already routed is all contained in the link driver. The PCI bridge drivers now ask the link driver which IRQ to use once they determine that a _PRT entry does not use a hardwired interrupt number. - The new link driver includes support for multiple IRQ resources per link device as well as preserving any non-IRQ resources when adjusting the IRQ that a link is routed to. - The entire approach to routing when using a link device is now link-centric rather than pci bus/device/pin specific. Thus, when using a tunable to override the default IRQ settings, one now uses a single tunable to route an entire link rather than routing a single device that uses the link (which has great foot-shooting potential if the user tries to route the same link to two different IRQs using two different pci bus/device/pin hints). For example, to adjust the IRQ that \_SB_.LNKA uses, one would set 'hw.pci.link.LNKA.irq=10' from the loader. - As a side effect of having the link driver, unused link devices will now be disabled when they are probed. - The algorithm for choosing an IRQ for a link that doesn't already have an IRQ assigned is now much closer to the one used in $PIR routing. When a link is routed via an ISA IRQ, only known-good IRQs that the BIOS has already used are used for routing instead of using probabilities to guess at which IRQs are probably not used by an ISA device. One change from $PIR is that the SCI is always considered a viable ISA IRQ, so that if the BIOS does not setup any IRQs the kernel will degenerate to routing all interrupts over the SCI. For non ISA IRQs, interrupts are picked from the possible pool using a simplistic weighting algorithm. Tested by: ru, scottl, others on acpi@ Reviewed by: njl
2004-11-23 22:26:44 +00:00
struct acpi_hpcib_softc *sc = device_get_softc(pcib);
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
Rework the ACPI PCI link code. - Use a new-bus device driver for the ACPI PCI link devices. The devices are called pci_linkX. The driver includes suspend/resume support so that the ACPI bridge drivers no longer have to poke the links to get them to handle suspend/resume. Also, the code to handle which IRQs a link is routed to and choosing an IRQ when a link is not already routed is all contained in the link driver. The PCI bridge drivers now ask the link driver which IRQ to use once they determine that a _PRT entry does not use a hardwired interrupt number. - The new link driver includes support for multiple IRQ resources per link device as well as preserving any non-IRQ resources when adjusting the IRQ that a link is routed to. - The entire approach to routing when using a link device is now link-centric rather than pci bus/device/pin specific. Thus, when using a tunable to override the default IRQ settings, one now uses a single tunable to route an entire link rather than routing a single device that uses the link (which has great foot-shooting potential if the user tries to route the same link to two different IRQs using two different pci bus/device/pin hints). For example, to adjust the IRQ that \_SB_.LNKA uses, one would set 'hw.pci.link.LNKA.irq=10' from the loader. - As a side effect of having the link driver, unused link devices will now be disabled when they are probed. - The algorithm for choosing an IRQ for a link that doesn't already have an IRQ assigned is now much closer to the one used in $PIR routing. When a link is routed via an ISA IRQ, only known-good IRQs that the BIOS has already used are used for routing instead of using probabilities to guess at which IRQs are probably not used by an ISA device. One change from $PIR is that the SCI is always considered a viable ISA IRQ, so that if the BIOS does not setup any IRQs the kernel will degenerate to routing all interrupts over the SCI. For non ISA IRQs, interrupts are picked from the possible pool using a simplistic weighting algorithm. Tested by: ru, scottl, others on acpi@ Reviewed by: njl
2004-11-23 22:26:44 +00:00
return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt));
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
static int
acpi_pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount,
int *irqs)
{
device_t bus;
bus = device_get_parent(pcib);
return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount,
irqs));
}
static int
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
acpi_pcib_alloc_msix(device_t pcib, device_t dev, int *irq)
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
{
device_t bus;
bus = device_get_parent(pcib);
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq));
}
static int
acpi_pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr,
uint32_t *data)
{
device_t bus;
bus = device_get_parent(pcib);
return (PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data));
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
2006-12-12 19:27:01 +00:00
}
unsigned long -> u_long
2004-11-09 07:02:33 +00:00
static u_long acpi_host_mem_start = 0x80000000;
Add TUNABLE_LONG and TUNABLE_ULONG, and use the latter for the hw.pci.host_mem_start tunable. Add comments to TUNABLE_INT and TUNABLE_QUAD recommending against their use. MFC after: 3 weeks
2004-10-31 15:50:33 +00:00
TUNABLE_ULONG("hw.acpi.host_mem_start", &acpi_host_mem_start);
Make the lower range of the memory area 0x80000000 again. Also introduce hw.{pci,acpi}.host_mem_start tunable to change this. MFC: ASAP
2004-10-11 21:10:23 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
struct resource *
acpi_pcib_acpi_alloc_resource(device_t dev, device_t child, int type, int *rid,
Style fixes.
2004-05-28 16:38:37 +00:00
u_long start, u_long end, u_long count, u_int flags)
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
{
Style fixes.
2004-05-28 16:38:37 +00:00
/*
For older systems with ACPI which don't have a pci <-> pci bridge, allocate unallocated memory resources from the top 32MB of the address space rather than the top 2GB. While the latter works on some chipsets, it fails badly on others. 32MB is more conservative and matches what cheap harware from this era is hardwired to pass.
2004-10-06 07:26:52 +00:00
* If no memory preference is given, use upper 32MB slot most
Style fixes.
2004-05-28 16:38:37 +00:00
* bioses use for their memory window. Typically other bridges
* before us get in the way to assert their preferences on memory.
* Hardcoding like this sucks, so a more MD/MI way needs to be
Make the default memory range in the top 2GB of ram in the hopes that this more accurately reflects what the underlying hardware of most acpi machines that don't have children pci busses. We still need a better way to get this information from acpi/hardware.
2004-07-04 16:23:25 +00:00
* found to do it. This is typically only used on older laptops
For older systems with ACPI which don't have a pci <-> pci bridge, allocate unallocated memory resources from the top 32MB of the address space rather than the top 2GB. While the latter works on some chipsets, it fails badly on others. 32MB is more conservative and matches what cheap harware from this era is hardwired to pass.
2004-10-06 07:26:52 +00:00
* that don't have pci busses behind pci bridge, so assuming > 32MB
Make the default memory range in the top 2GB of ram in the hopes that this more accurately reflects what the underlying hardware of most acpi machines that don't have children pci busses. We still need a better way to get this information from acpi/hardware.
2004-07-04 16:23:25 +00:00
* is liekly OK.
Style fixes.
2004-05-28 16:38:37 +00:00
*/
if (type == SYS_RES_MEMORY && start == 0UL && end == ~0UL)
Make the lower range of the memory area 0x80000000 again. Also introduce hw.{pci,acpi}.host_mem_start tunable to change this. MFC: ASAP
2004-10-11 21:10:23 +00:00
start = acpi_host_mem_start;
Commit a workaround to a problem with resource allocation. This helps with some Dell servers that booted w/o a problem[*] on 5.4, but failed with 6.0-BETA. On the PCI bus, when we do lazy resource allocation, we narrow the range requested as we pass through bridges to reflect how the bridges are programmed and what addresses they pass. However, when we're doing an allocation on a bus that's directly connected to a host bridge, no such translation can take place. We already had a fallback range for memory requests, but none for ioports. As such, provide a fallback for I/O ports so we don't allocate location 0, which will have undesired side effects when the resources are actually used. This fixes a problem with booting a Dell server with usb in the kernel. However, it is an unsatisfying solution. I don't like the hard coded value, and I think we should start narrowing the resources returned to not be in the so-called isa alias area (where the ranage & 0x0300 must be 0 iirc). Doing such filtering will have to wait for another day. This may be a good 6 candidate, maybe after its had a chance to be refined. Tested by: glebius@
2005-09-16 07:02:29 +00:00
if (type == SYS_RES_IOPORT && start == 0UL && end == ~0UL)
start = 0x1000;
Style fixes.
2004-05-28 16:38:37 +00:00
return (bus_generic_alloc_resource(dev, child, type, rid, start, end,
count, flags));
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
}
Reference in New Issue Copy Permalink