d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3e78e98337
freebsd-dev/sys/conf/kern.opts.mk

165 lines
4.2 KiB
Makefile
Raw Normal View History

Introduce kern.opts.mk to hold all the options for kernel module builds. Include this in the right places. Make src.opts.mk optional so that modules can be built outside of the tree in the ports system. PR: 189520
2014-05-09 21:11:27 +00:00
# $FreeBSD$
# Options set in the build system that affect the kernel somehow.
#
# Define MK_* variables (which are either "yes" or "no") for users
# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the
# make(1) environment.
# These should be tested with `== "no"' or `!= "no"' in makefiles.
# The NO_* variables should only be set by makefiles for variables
# that haven't been converted over.
#
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
# Note: bsd.own.mk must be included before the rest of kern.opts.mk to make
# building on 10.x and earlier work. This should be removed when that's no
# longer supported since it confounds the defaults (since it uses the host's
# notion of defaults rather than what's default in current when building
# within sys/modules).
.include <bsd.own.mk>
Introduce kern.opts.mk to hold all the options for kernel module builds. Include this in the right places. Make src.opts.mk optional so that modules can be built outside of the tree in the ports system. PR: 189520
2014-05-09 21:11:27 +00:00
# These options are used by the kernel build process (kern.mk and kmod.mk)
# They have to be listed here so we can build modules outside of the
# src tree.
__DEFAULT_YES_OPTIONS = \
Add MK_AUTOFS knob for building and installing autofs(4), et al MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-26 07:15:49 +00:00
AUTOFS \
Add MK_BHYVE knob for building and installing bhyve(4), et al MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-26 06:44:48 +00:00
BHYVE \
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
BLUETOOTH \
Add MK_CCD knob for building and installing ccd(4), ccdconfig, etc MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:52:48 +00:00
CCD \
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
CDDL \
CRYPT \
Build cuse(4) if MK_CUSE != no MFC after: 1 week Sponsored by: EMC / Isilon Storage Division
2015-01-25 05:13:15 +00:00
CUSE \
Fix typo in FORMAT_EXTENSIONS which breaks universe.
2014-05-10 00:42:43 +00:00
FORMAT_EXTENSIONS \
Move most of the 15 variations on generating opt_inet.h and opt_inet6.h into kmod.mk by forcing almost everybody to eat the same dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h targets here too.
2014-08-04 22:37:02 +00:00
INET \
INET6 \
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
IPFILTER \
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
IPSEC_SUPPORT \
Add MK_ISCSI knob for building the iscsi initiator, iscsi daemon, kernel modules, etc MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:20:11 +00:00
ISCSI \
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
KERNEL_SYMBOLS \
NETGRAPH \
PF \
SOURCELESS_HOST \
SOURCELESS_UCODE \
Add MK_TESTS to kern.opts.mk to support r31800 MFC after: 3 weeks MFC with: r318008 Pointyhat to: ngie Sponsored by: Dell EMC Isilon
2017-05-09 05:03:35 +00:00
TESTS \
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
USB_GADGET_EXAMPLES \
ZFS
__DEFAULT_NO_OPTIONS = \
Change the default build behavior so we don't compile extra TCP modules by default. At least initially, the feature to support multiple TCP stacks is aimed at supporting advanced use cases and TCP development, but it is not necessarily aimed at a wide audience. Therefore, there is no need to build and install the extra TCP stacks by default. Instead, the people who are using or developing this functionality can add the extra option to build/ install the extra TCP stacks. However, we do want to build the extra TCP stacks as part of test builds (e.g. LINT or tinderbox) to ensure that developers who are testing their changes will know that their changes do not break the additional TCP stack modules. After this change, a user will need to add WITH_EXTRA_TCP_STACKS=1 to make.conf or the kernel config in order to build the extra TCP modules. Differential Revision: https://reviews.freebsd.org/D6795 Reviewed by: sjg Approved by: re (kib)
2016-06-10 19:06:11 +00:00
EXTRA_TCP_STACKS \
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
NAND \
Add WITH_REPRODUCIBLE_BUILD src.conf(5) knob to disable kernel metadata The kernel builds reproducibly, except for the time, date, user, and hostname baked into the kernel (reported at startup and via the kern.version sysctl for uname). Add a build knob to disable the inclusion of this metadata. Reviewed by: jhb MFC after: 1 month Relnotes: Yes Sponsored by: Reproducible Builds World Summit 2, Berlin Differential Revision: https://reviews.freebsd.org/D8809
2016-12-15 21:26:58 +00:00
OFED \
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
RATELIMIT \
Add WITH_REPRODUCIBLE_BUILD src.conf(5) knob to disable kernel metadata The kernel builds reproducibly, except for the time, date, user, and hostname baked into the kernel (reported at startup and via the kern.version sysctl for uname). Add a build knob to disable the inclusion of this metadata. Reviewed by: jhb MFC after: 1 month Relnotes: Yes Sponsored by: Reproducible Builds World Summit 2, Berlin Differential Revision: https://reviews.freebsd.org/D8809
2016-12-15 21:26:58 +00:00
REPRODUCIBLE_BUILD
Introduce kern.opts.mk to hold all the options for kernel module builds. Include this in the right places. Make src.opts.mk optional so that modules can be built outside of the tree in the ports system. PR: 189520
2014-05-09 21:11:27 +00:00
Categorize certain kernel builds as being broken in certain places. Differential Revision: https://reviews.freebsd.org/D2010
2015-03-12 03:57:19 +00:00
# Some options are totally broken on some architectures. We disable
# them. If you need to enable them on an experimental basis, you
# must change this code.
Add a note of clarification. MK_* variables only control what modules are built by default. You can still override that with MODULES_EXTRA for experimental features like ZFS and dtrace on some architectures. Also note that kernel config files are not affected by MK_ options listed, though some targets might be.
2015-03-27 17:36:22 +00:00
# Note: These only apply to the list of modules we build by default
# and sometimes what is in the opt_*.h files by default.
# Kernel config files are unaffected, though some targets can be
# affected by KERNEL_SYMBOLS, FORMAT_EXTENSIONS, CTF and SSP.
Categorize certain kernel builds as being broken in certain places. Differential Revision: https://reviews.freebsd.org/D2010
2015-03-12 03:57:19 +00:00
# Things that don't work based on the CPU
.if ${MACHINE_CPUARCH} == "arm"
DTrace is known to work on armv6, enable building it as a module. Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D4221
2015-11-20 16:18:27 +00:00
. if ${MACHINE_ARCH:Marmv6*} == ""
Build the zfs module on armv6, but not on older arm. There have been reports in the past that zfs works on armv6, and now people are wanting to test it again, so let's give them something to work with.
2016-03-21 23:32:13 +00:00
BROKEN_OPTIONS+= CDDL ZFS
DTrace is known to work on armv6, enable building it as a module. Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D4221
2015-11-20 16:18:27 +00:00
. endif
Categorize certain kernel builds as being broken in certain places. Differential Revision: https://reviews.freebsd.org/D2010
2015-03-12 03:57:19 +00:00
.endif
.if ${MACHINE_CPUARCH} == "mips"
Keep in-sync MK_SSP=no option both with kernel and userspace. Pointed out by: emaste Sponsored by: DARPA, AFRL Sponsored by: HEIF5
2016-10-12 13:51:41 +00:00
BROKEN_OPTIONS+= CDDL ZFS SSP
Categorize certain kernel builds as being broken in certain places. Differential Revision: https://reviews.freebsd.org/D2010
2015-03-12 03:57:19 +00:00
.endif
.if ${MACHINE_CPUARCH} == "powerpc" && ${MACHINE_ARCH} == "powerpc"
BROKEN_OPTIONS+= ZFS
.endif
Disable fformat-extensions for RISC-V target as GCC 6.1 external compiler has no support for that. Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D10348
2017-04-12 10:40:30 +00:00
.if ${MACHINE_CPUARCH} == "riscv"
BROKEN_OPTIONS+= FORMAT_EXTENSIONS
.endif
Categorize certain kernel builds as being broken in certain places. Differential Revision: https://reviews.freebsd.org/D2010
2015-03-12 03:57:19 +00:00
# Things that don't work because the kernel doesn't have the support
# for them.
.if ${MACHINE} != "i386" && ${MACHINE} != "amd64"
BROKEN_OPTIONS+= OFED
.endif
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
# expanded inline from bsd.mkopt.mk to avoid share/mk dependency
Introduce kern.opts.mk to hold all the options for kernel module builds. Include this in the right places. Make src.opts.mk optional so that modules can be built outside of the tree in the ports system. PR: 189520
2014-05-09 21:11:27 +00:00
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
# Those that default to yes
The time is not yet ripe to break the lack of dependencies between src/sys and the rest of the tree for builds. o eliminate including bsd.mkopts.mk for the moment in kern.opts.mk o No need to include src.opts.mk at all anymore. The reasons for it are now coverted in sys.mk and src.sys.mk.
2014-05-17 20:31:34 +00:00
.for var in ${__DEFAULT_YES_OPTIONS}
.if !defined(MK_${var})
.if defined(WITHOUT_${var}) # WITHOUT always wins
MK_${var}:= no
Attempt to walk a fine line between current usage (/usr/ports which does an out-of-tree build without setting MAKESYSPATH) and recently added requirements (JIRA's building the modules in a non-standard layout). So, when MAKESYSPATH is defined, trust that it will do the right thing (to catch the JIRA use case). When it isn't defined, assume a standard FreeBSD tree and reach over to grab bsd.mkopt.mk (to fix the /usr/ports use case). Both camps cannot be appeased otherwise, so we have this kludge until it can be sorted out.
2014-05-11 23:22:32 +00:00
.else
The time is not yet ripe to break the lack of dependencies between src/sys and the rest of the tree for builds. o eliminate including bsd.mkopts.mk for the moment in kern.opts.mk o No need to include src.opts.mk at all anymore. The reasons for it are now coverted in sys.mk and src.sys.mk.
2014-05-17 20:31:34 +00:00
MK_${var}:= yes
Attempt to walk a fine line between current usage (/usr/ports which does an out-of-tree build without setting MAKESYSPATH) and recently added requirements (JIRA's building the modules in a non-standard layout). So, when MAKESYSPATH is defined, trust that it will do the right thing (to catch the JIRA use case). When it isn't defined, assume a standard FreeBSD tree and reach over to grab bsd.mkopt.mk (to fix the /usr/ports use case). Both camps cannot be appeased otherwise, so we have this kludge until it can be sorted out.
2014-05-11 23:22:32 +00:00
.endif
Enforce that MK_foo options shall be either "yes" or "no" and nothing else.
2015-02-09 16:03:55 +00:00
.else
.if ${MK_${var}} != "yes" && ${MK_${var}} != "no"
.error "Illegal value for MK_${var}: ${MK_${var}}"
The time is not yet ripe to break the lack of dependencies between src/sys and the rest of the tree for builds. o eliminate including bsd.mkopts.mk for the moment in kern.opts.mk o No need to include src.opts.mk at all anymore. The reasons for it are now coverted in sys.mk and src.sys.mk.
2014-05-17 20:31:34 +00:00
.endif
Enforce that MK_foo options shall be either "yes" or "no" and nothing else.
2015-02-09 16:03:55 +00:00
.endif # !defined(MK_${var})
The time is not yet ripe to break the lack of dependencies between src/sys and the rest of the tree for builds. o eliminate including bsd.mkopts.mk for the moment in kern.opts.mk o No need to include src.opts.mk at all anymore. The reasons for it are now coverted in sys.mk and src.sys.mk.
2014-05-17 20:31:34 +00:00
.endfor
.undef __DEFAULT_YES_OPTIONS
Move most of the 15 variations on generating opt_inet.h and opt_inet6.h into kmod.mk by forcing almost everybody to eat the same dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h targets here too.
2014-08-04 22:37:02 +00:00
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
# Those that default to no
.for var in ${__DEFAULT_NO_OPTIONS}
.if !defined(MK_${var})
.if defined(WITH_${var}) && !defined(WITHOUT_${var}) # WITHOUT always wins
MK_${var}:= yes
.else
MK_${var}:= no
.endif
Enforce that MK_foo options shall be either "yes" or "no" and nothing else.
2015-02-09 16:03:55 +00:00
.else
.if ${MK_${var}} != "yes" && ${MK_${var}} != "no"
.error "Illegal value for MK_${var}: ${MK_${var}}"
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
.endif
Enforce that MK_foo options shall be either "yes" or "no" and nothing else.
2015-02-09 16:03:55 +00:00
.endif # !defined(MK_${var})
Remove dependence on source tree options. Move all kernel module options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529
2014-08-11 14:50:49 +00:00
.endfor
.undef __DEFAULT_NO_OPTIONS
Add support for specifying unsupported / broken options that override any defaults or user specified actions on the command line. This would be useful for specifying features that are always broken or that cannot make sense on a specific architecture, like ACPI on pc98 or EISA on !i386 (!x86 usage of EISA is broken and there's no supported hardware that could have it in any event). Any items in BROKEN_OPTIONS are forced to "no" regardless of other settings. Clients are expected change BROKEN_OPTIONS with +=. It will not be unset, so other parts of the build system can have visibility into the options that are broken on this platform, though this should be very rare. Differential Revision: https://reviews.freebsd.org/D2009
2015-03-12 03:57:00 +00:00
#
# MK_* options which are always no, usually because they are
# unsupported/badly broken on this architecture.
#
.for var in ${BROKEN_OPTIONS}
MK_${var}:= no
.endfor
.undef BROKEN_OPTIONS
#end of bsd.mkopt.mk expanded inline.
Move most of the 15 variations on generating opt_inet.h and opt_inet6.h into kmod.mk by forcing almost everybody to eat the same dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h targets here too.
2014-08-04 22:37:02 +00:00
#
# MK_*_SUPPORT options which default to "yes" unless their corresponding
# MK_* variable is set to "no".
#
.for var in \
INET \
INET6
.if defined(WITHOUT_${var}_SUPPORT) || ${MK_${var}} == "no"
MK_${var}_SUPPORT:= no
.else
Automate options INET/INET6 turning into MK_$opt_SUPPORT correctly. Fixes if_gfe when building without INET6 and simplifies if_gif's Makefile. Sponsored by: Netflix, Inc
2014-11-14 21:10:45 +00:00
.if defined(KERNBUILDDIR) # See if there's an opt_foo.h
Stop looking up these values in every subdir on install. This was slowing down installkernel since it was rerunning this in every module directory. Sponsored by: EMC / Isilon Storage Division
2016-03-12 22:21:02 +00:00
.if !defined(OPT_${var})
Automate options INET/INET6 turning into MK_$opt_SUPPORT correctly. Fixes if_gfe when building without INET6 and simplifies if_gif's Makefile. Sponsored by: Netflix, Inc
2014-11-14 21:10:45 +00:00
OPT_${var}!= cat ${KERNBUILDDIR}/opt_${var:tl}.h; echo
Stop looking up these values in every subdir on install. This was slowing down installkernel since it was rerunning this in every module directory. Sponsored by: EMC / Isilon Storage Division
2016-03-12 22:21:02 +00:00
.export OPT_${var}
.endif
Automate options INET/INET6 turning into MK_$opt_SUPPORT correctly. Fixes if_gfe when building without INET6 and simplifies if_gif's Makefile. Sponsored by: Netflix, Inc
2014-11-14 21:10:45 +00:00
.if ${OPT_${var}} == "" # nothing -> no
MK_${var}_SUPPORT:= no
.else
MK_${var}_SUPPORT:= yes
.endif
.else # otherwise, yes
Move most of the 15 variations on generating opt_inet.h and opt_inet6.h into kmod.mk by forcing almost everybody to eat the same dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h targets here too.
2014-08-04 22:37:02 +00:00
MK_${var}_SUPPORT:= yes
.endif
Automate options INET/INET6 turning into MK_$opt_SUPPORT correctly. Fixes if_gfe when building without INET6 and simplifies if_gif's Makefile. Sponsored by: Netflix, Inc
2014-11-14 21:10:45 +00:00
.endif
Move most of the 15 variations on generating opt_inet.h and opt_inet6.h into kmod.mk by forcing almost everybody to eat the same dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h targets here too.
2014-08-04 22:37:02 +00:00
.endfor
When building modules, define make variable OPT_FDT if the kernel config includes the FDT option. Use OPT_FDT to conditionally compile modules that require FDT support. In the past we've gotten away with using the arch name as a proxy for FDT support in makefile conditional logic, but now mips has some platforms with fdt support and some without and we need a more direct test.
2016-05-27 17:40:29 +00:00
# Some modules only compile successfully if option FDT is set, due to #ifdef FDT
# wrapped around declarations. Module makefiles can optionally compile such
# things using .if !empty(OPT_FDT)
.if !defined(OPT_FDT) && defined(KERNBUILDDIR)
OPT_FDT!= sed -n '/FDT/p' ${KERNBUILDDIR}/opt_platform.h
.export OPT_FDT
.endif
Reference in New Issue Copy Permalink