freebsd-dev/sys/net/if_media.h

683 lines
24 KiB
C
Raw Normal View History

/* $NetBSD: if_media.h,v 1.3 1997/03/26 01:19:27 thorpej Exp $ */
1999-08-28 01:08:13 +00:00
/* $FreeBSD$ */
/*-
* Copyright (c) 1997
* Jonathan Stone and Jason R. Thorpe. All rights reserved.
*
* This software is derived from information provided by Matt Thomas.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Jonathan Stone
* and Jason R. Thorpe for the NetBSD Project.
* 4. The names of the authors may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _NET_IF_MEDIA_H_
#define _NET_IF_MEDIA_H_
/*
* Prototypes and definitions for BSD/OS-compatible network interface
* media selection.
*
* Where it is safe to do so, this code strays slightly from the BSD/OS
* design. Software which uses the API (device drivers, basically)
* shouldn't notice any difference.
*
* Many thanks to Matt Thomas for providing the information necessary
* to implement this interface.
*/
#ifdef _KERNEL
#include <sys/queue.h>
/*
* Driver callbacks for media status and change requests.
*/
2002-03-19 21:54:18 +00:00
typedef int (*ifm_change_cb_t)(struct ifnet *ifp);
typedef void (*ifm_stat_cb_t)(struct ifnet *ifp, struct ifmediareq *req);
/*
* In-kernel representation of a single supported media type.
*/
struct ifmedia_entry {
LIST_ENTRY(ifmedia_entry) ifm_list;
int ifm_media; /* description of this media attachment */
int ifm_data; /* for driver-specific use */
void *ifm_aux; /* for driver-specific use */
};
/*
* One of these goes into a network interface's softc structure.
* It is used to keep general media state.
*/
struct ifmedia {
int ifm_mask; /* mask of changes we don't care about */
int ifm_media; /* current user-set media word */
struct ifmedia_entry *ifm_cur; /* currently selected media */
LIST_HEAD(, ifmedia_entry) ifm_list; /* list of all supported media */
ifm_change_cb_t ifm_change; /* media change driver callback */
ifm_stat_cb_t ifm_status; /* media status driver callback */
};
/* Initialize an interface's struct if_media field. */
2002-03-19 21:54:18 +00:00
void ifmedia_init(struct ifmedia *ifm, int dontcare_mask,
ifm_change_cb_t change_callback, ifm_stat_cb_t status_callback);
/* Remove all mediums from a struct ifmedia. */
2002-03-19 21:54:18 +00:00
void ifmedia_removeall( struct ifmedia *ifm);
/* Add one supported medium to a struct ifmedia. */
2002-03-19 21:54:18 +00:00
void ifmedia_add(struct ifmedia *ifm, int mword, int data, void *aux);
/* Add an array (of ifmedia_entry) media to a struct ifmedia. */
void ifmedia_list_add(struct ifmedia *mp, struct ifmedia_entry *lp,
int count);
/* Set default media type on initialization. */
2002-03-19 21:54:18 +00:00
void ifmedia_set(struct ifmedia *ifm, int mword);
/* Common ioctl function for getting/setting media, called by driver. */
2002-03-19 21:54:18 +00:00
int ifmedia_ioctl(struct ifnet *ifp, struct ifreq *ifr,
struct ifmedia *ifm, u_long cmd);
/* Compute baudrate for a given media. */
uint64_t ifmedia_baudrate(int);
#endif /*_KERNEL */
/*
* if_media Options word:
* Bits Use
* ---- -------
* 0-4 Media variant
* 5-7 Media type
* 8-15 Type specific options
* 16-18 Mode (for multi-mode devices)
* 19 RFU
* 20-27 Shared (global) options
* 28-31 Instance
*/
/*
* Ethernet
*/
#define IFM_ETHER 0x00000020
#define IFM_10_T 3 /* 10BaseT - RJ45 */
#define IFM_10_2 4 /* 10Base2 - Thinnet */
#define IFM_10_5 5 /* 10Base5 - AUI */
#define IFM_100_TX 6 /* 100BaseTX - RJ45 */
#define IFM_100_FX 7 /* 100BaseFX - Fiber */
#define IFM_100_T4 8 /* 100BaseT4 - 4 pair cat 3 */
#define IFM_100_VG 9 /* 100VG-AnyLAN */
#define IFM_100_T2 10 /* 100BaseT2 */
#define IFM_1000_SX 11 /* 1000BaseSX - multi-mode fiber */
#define IFM_10_STP 12 /* 10BaseT over shielded TP */
#define IFM_10_FL 13 /* 10BaseFL - Fiber */
#define IFM_1000_LX 14 /* 1000baseLX - single-mode fiber */
#define IFM_1000_CX 15 /* 1000baseCX - 150ohm STP */
#define IFM_1000_T 16 /* 1000baseT - 4 pair cat 5 */
#define IFM_HPNA_1 17 /* HomePNA 1.0 (1Mb/s) */
#define IFM_10G_LR 18 /* 10GBase-LR 1310nm Single-mode */
#define IFM_10G_SR 19 /* 10GBase-SR 850nm Multi-mode */
#define IFM_10G_CX4 20 /* 10GBase CX4 copper */
#define IFM_2500_SX 21 /* 2500BaseSX - multi-mode fiber */
#define IFM_10G_TWINAX 22 /* 10GBase Twinax copper */
#define IFM_10G_TWINAX_LONG 23 /* 10GBase Twinax Long copper */
#define IFM_10G_LRM 24 /* 10GBase-LRM 850nm Multi-mode */
#define IFM_UNKNOWN 25 /* media types not defined yet */
#define IFM_10G_T 26 /* 10GBase-T - RJ45 */
/* note 31 is the max! */
#define IFM_ETH_MASTER 0x00000100 /* master mode (1000baseT) */
/*
* Token ring
*/
#define IFM_TOKEN 0x00000040
#define IFM_TOK_STP4 3 /* Shielded twisted pair 4m - DB9 */
#define IFM_TOK_STP16 4 /* Shielded twisted pair 16m - DB9 */
#define IFM_TOK_UTP4 5 /* Unshielded twisted pair 4m - RJ45 */
#define IFM_TOK_UTP16 6 /* Unshielded twisted pair 16m - RJ45 */
#define IFM_TOK_STP100 7 /* Shielded twisted pair 100m - DB9 */
#define IFM_TOK_UTP100 8 /* Unshielded twisted pair 100m - RJ45 */
#define IFM_TOK_ETR 0x00000200 /* Early token release */
#define IFM_TOK_SRCRT 0x00000400 /* Enable source routing features */
#define IFM_TOK_ALLR 0x00000800 /* All routes / Single route bcast */
#define IFM_TOK_DTR 0x00002000 /* Dedicated token ring */
#define IFM_TOK_CLASSIC 0x00004000 /* Classic token ring */
#define IFM_TOK_AUTO 0x00008000 /* Automatic Dedicate/Classic token ring */
/*
* FDDI
*/
#define IFM_FDDI 0x00000060
#define IFM_FDDI_SMF 3 /* Single-mode fiber */
#define IFM_FDDI_MMF 4 /* Multi-mode fiber */
#define IFM_FDDI_UTP 5 /* CDDI / UTP */
#define IFM_FDDI_DA 0x00000100 /* Dual attach / single attach */
/*
* IEEE 802.11 Wireless
*/
#define IFM_IEEE80211 0x00000080
/* NB: 0,1,2 are auto, manual, none defined below */
#define IFM_IEEE80211_FH1 3 /* Frequency Hopping 1Mbps */
#define IFM_IEEE80211_FH2 4 /* Frequency Hopping 2Mbps */
#define IFM_IEEE80211_DS1 5 /* Direct Sequence 1Mbps */
#define IFM_IEEE80211_DS2 6 /* Direct Sequence 2Mbps */
#define IFM_IEEE80211_DS5 7 /* Direct Sequence 5.5Mbps */
#define IFM_IEEE80211_DS11 8 /* Direct Sequence 11Mbps */
#define IFM_IEEE80211_DS22 9 /* Direct Sequence 22Mbps */
#define IFM_IEEE80211_OFDM6 10 /* OFDM 6Mbps */
#define IFM_IEEE80211_OFDM9 11 /* OFDM 9Mbps */
#define IFM_IEEE80211_OFDM12 12 /* OFDM 12Mbps */
#define IFM_IEEE80211_OFDM18 13 /* OFDM 18Mbps */
#define IFM_IEEE80211_OFDM24 14 /* OFDM 24Mbps */
#define IFM_IEEE80211_OFDM36 15 /* OFDM 36Mbps */
#define IFM_IEEE80211_OFDM48 16 /* OFDM 48Mbps */
#define IFM_IEEE80211_OFDM54 17 /* OFDM 54Mbps */
#define IFM_IEEE80211_OFDM72 18 /* OFDM 72Mbps */
#define IFM_IEEE80211_DS354k 19 /* Direct Sequence 354Kbps */
#define IFM_IEEE80211_DS512k 20 /* Direct Sequence 512Kbps */
#define IFM_IEEE80211_OFDM3 21 /* OFDM 3Mbps */
#define IFM_IEEE80211_OFDM4 22 /* OFDM 4.5Mbps */
#define IFM_IEEE80211_OFDM27 23 /* OFDM 27Mbps */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/* NB: not enough bits to express MCS fully */
#define IFM_IEEE80211_MCS 24 /* HT MCS rate */
#define IFM_IEEE80211_ADHOC 0x00000100 /* Operate in Adhoc mode */
#define IFM_IEEE80211_HOSTAP 0x00000200 /* Operate in Host AP mode */
#define IFM_IEEE80211_IBSS 0x00000400 /* Operate in IBSS mode */
#define IFM_IEEE80211_WDS 0x00000800 /* Operate in WDS mode */
#define IFM_IEEE80211_TURBO 0x00001000 /* Operate in turbo mode */
2003-07-21 02:49:42 +00:00
#define IFM_IEEE80211_MONITOR 0x00002000 /* Operate in monitor mode */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#define IFM_IEEE80211_MBSS 0x00004000 /* Operate in MBSS mode */
/* operating mode for multi-mode devices */
#define IFM_IEEE80211_11A 0x00010000 /* 5Ghz, OFDM mode */
#define IFM_IEEE80211_11B 0x00020000 /* Direct Sequence mode */
#define IFM_IEEE80211_11G 0x00030000 /* 2Ghz, CCK mode */
#define IFM_IEEE80211_FH 0x00040000 /* 2Ghz, GFSK mode */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#define IFM_IEEE80211_11NA 0x00050000 /* 5Ghz, HT mode */
#define IFM_IEEE80211_11NG 0x00060000 /* 2Ghz, HT mode */
/*
* ATM
*/
#define IFM_ATM 0x000000a0
#define IFM_ATM_UNKNOWN 3
#define IFM_ATM_UTP_25 4
#define IFM_ATM_TAXI_100 5
#define IFM_ATM_TAXI_140 6
#define IFM_ATM_MM_155 7
#define IFM_ATM_SM_155 8
#define IFM_ATM_UTP_155 9
#define IFM_ATM_MM_622 10
#define IFM_ATM_SM_622 11
#define IFM_ATM_VIRTUAL 12
#define IFM_ATM_SDH 0x00000100 /* SDH instead of SONET */
#define IFM_ATM_NOSCRAMB 0x00000200 /* no scrambling */
#define IFM_ATM_UNASSIGNED 0x00000400 /* unassigned cells */
/*
* CARP Common Address Redundancy Protocol
*/
#define IFM_CARP 0x000000c0
/*
* Shared media sub-types
*/
#define IFM_AUTO 0 /* Autoselect best media */
#define IFM_MANUAL 1 /* Jumper/dipswitch selects media */
#define IFM_NONE 2 /* Deselect all media */
/*
* Shared options
*/
#define IFM_FDX 0x00100000 /* Force full duplex */
#define IFM_HDX 0x00200000 /* Force half duplex */
#define IFM_FLAG0 0x01000000 /* Driver defined flag */
#define IFM_FLAG1 0x02000000 /* Driver defined flag */
#define IFM_FLAG2 0x04000000 /* Driver defined flag */
#define IFM_LOOP 0x08000000 /* Put hardware in loopback */
/*
* Masks
*/
#define IFM_NMASK 0x000000e0 /* Network type */
#define IFM_TMASK 0x0000001f /* Media sub-type */
#define IFM_IMASK 0xf0000000 /* Instance */
#define IFM_ISHIFT 28 /* Instance shift */
#define IFM_OMASK 0x0000ff00 /* Type specific options */
#define IFM_MMASK 0x00070000 /* Mode */
#define IFM_MSHIFT 16 /* Mode shift */
#define IFM_GMASK 0x0ff00000 /* Global options */
/*
* Status bits
*/
#define IFM_AVALID 0x00000001 /* Active bit valid */
#define IFM_ACTIVE 0x00000002 /* Interface attached to working net */
/* Mask of "status valid" bits, for ifconfig(8). */
#define IFM_STATUS_VALID IFM_AVALID
/* List of "status valid" bits, for ifconfig(8). */
#define IFM_STATUS_VALID_LIST { \
IFM_AVALID, \
0 \
}
/*
* Macros to extract various bits of information from the media word.
*/
#define IFM_TYPE(x) ((x) & IFM_NMASK)
#define IFM_SUBTYPE(x) ((x) & IFM_TMASK)
#define IFM_TYPE_OPTIONS(x) ((x) & IFM_OMASK)
#define IFM_INST(x) (((x) & IFM_IMASK) >> IFM_ISHIFT)
#define IFM_OPTIONS(x) ((x) & (IFM_OMASK|IFM_GMASK))
#define IFM_MODE(x) ((x) & IFM_MMASK)
#define IFM_INST_MAX IFM_INST(IFM_IMASK)
/*
* Macro to create a media word.
*/
#define IFM_MAKEWORD(type, subtype, options, instance) \
((type) | (subtype) | (options) | ((instance) << IFM_ISHIFT))
#define IFM_MAKEMODE(mode) \
(((mode) << IFM_MSHIFT) & IFM_MMASK)
/*
* NetBSD extension not defined in the BSDI API. This is used in various
* places to get the canonical description for a given type/subtype.
*
* NOTE: all but the top-level type descriptions must contain NO whitespace!
* Otherwise, parsing these in ifconfig(8) would be a nightmare.
*/
struct ifmedia_description {
int ifmt_word; /* word value; may be masked */
const char *ifmt_string; /* description */
};
#define IFM_TYPE_DESCRIPTIONS { \
{ IFM_ETHER, "Ethernet" }, \
{ IFM_TOKEN, "Token ring" }, \
{ IFM_FDDI, "FDDI" }, \
{ IFM_IEEE80211, "IEEE 802.11 Wireless Ethernet" }, \
{ IFM_ATM, "ATM" }, \
{ IFM_CARP, "Common Address Redundancy Protocol" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_ETHERNET_DESCRIPTIONS { \
{ IFM_10_T, "10baseT/UTP" }, \
{ IFM_10_2, "10base2/BNC" }, \
{ IFM_10_5, "10base5/AUI" }, \
{ IFM_100_TX, "100baseTX" }, \
{ IFM_100_FX, "100baseFX" }, \
{ IFM_100_T4, "100baseT4" }, \
{ IFM_100_VG, "100baseVG" }, \
{ IFM_100_T2, "100baseT2" }, \
{ IFM_10_STP, "10baseSTP" }, \
{ IFM_10_FL, "10baseFL" }, \
{ IFM_1000_SX, "1000baseSX" }, \
{ IFM_1000_LX, "1000baseLX" }, \
{ IFM_1000_CX, "1000baseCX" }, \
{ IFM_1000_T, "1000baseT" }, \
{ IFM_HPNA_1, "homePNA" }, \
2006-02-15 08:25:40 +00:00
{ IFM_10G_LR, "10Gbase-LR" }, \
{ IFM_10G_SR, "10Gbase-SR" }, \
{ IFM_10G_CX4, "10Gbase-CX4" }, \
{ IFM_2500_SX, "2500BaseSX" }, \
{ IFM_10G_LRM, "10Gbase-LRM" }, \
{ IFM_10G_TWINAX, "10Gbase-Twinax" }, \
{ IFM_10G_TWINAX_LONG, "10Gbase-Twinax-Long" }, \
{ IFM_UNKNOWN, "Unknown" }, \
{ IFM_10G_T, "10Gbase-T" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_ETHERNET_ALIASES { \
{ IFM_10_T, "UTP" }, \
{ IFM_10_T, "10UTP" }, \
{ IFM_10_2, "BNC" }, \
{ IFM_10_2, "10BNC" }, \
{ IFM_10_5, "AUI" }, \
{ IFM_10_5, "10AUI" }, \
{ IFM_100_TX, "100TX" }, \
{ IFM_100_T4, "100T4" }, \
{ IFM_100_VG, "100VG" }, \
{ IFM_100_T2, "100T2" }, \
{ IFM_10_STP, "10STP" }, \
{ IFM_10_FL, "10FL" }, \
{ IFM_1000_SX, "1000SX" }, \
{ IFM_1000_LX, "1000LX" }, \
{ IFM_1000_CX, "1000CX" }, \
{ IFM_1000_T, "1000baseTX" }, \
{ IFM_1000_T, "1000TX" }, \
{ IFM_1000_T, "1000T" }, \
{ IFM_2500_SX, "2500SX" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS { \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_TOKENRING_DESCRIPTIONS { \
{ IFM_TOK_STP4, "DB9/4Mbit" }, \
{ IFM_TOK_STP16, "DB9/16Mbit" }, \
{ IFM_TOK_UTP4, "UTP/4Mbit" }, \
{ IFM_TOK_UTP16, "UTP/16Mbit" }, \
{ IFM_TOK_STP100, "STP/100Mbit" }, \
{ IFM_TOK_UTP100, "UTP/100Mbit" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_TOKENRING_ALIASES { \
{ IFM_TOK_STP4, "4STP" }, \
{ IFM_TOK_STP16, "16STP" }, \
{ IFM_TOK_UTP4, "4UTP" }, \
{ IFM_TOK_UTP16, "16UTP" }, \
{ IFM_TOK_STP100, "100STP" }, \
{ IFM_TOK_UTP100, "100UTP" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_TOKENRING_OPTION_DESCRIPTIONS { \
{ IFM_TOK_ETR, "EarlyTokenRelease" }, \
{ IFM_TOK_SRCRT, "SourceRouting" }, \
{ IFM_TOK_ALLR, "AllRoutes" }, \
{ IFM_TOK_DTR, "Dedicated" }, \
{ IFM_TOK_CLASSIC,"Classic" }, \
{ IFM_TOK_AUTO, " " }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_FDDI_DESCRIPTIONS { \
{ IFM_FDDI_SMF, "Single-mode" }, \
{ IFM_FDDI_MMF, "Multi-mode" }, \
{ IFM_FDDI_UTP, "UTP" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_FDDI_ALIASES { \
{ IFM_FDDI_SMF, "SMF" }, \
{ IFM_FDDI_MMF, "MMF" }, \
{ IFM_FDDI_UTP, "CDDI" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_FDDI_OPTION_DESCRIPTIONS { \
{ IFM_FDDI_DA, "Dual-attach" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_IEEE80211_DESCRIPTIONS { \
{ IFM_IEEE80211_FH1, "FH/1Mbps" }, \
{ IFM_IEEE80211_FH2, "FH/2Mbps" }, \
{ IFM_IEEE80211_DS1, "DS/1Mbps" }, \
{ IFM_IEEE80211_DS2, "DS/2Mbps" }, \
{ IFM_IEEE80211_DS5, "DS/5.5Mbps" }, \
{ IFM_IEEE80211_DS11, "DS/11Mbps" }, \
{ IFM_IEEE80211_DS22, "DS/22Mbps" }, \
{ IFM_IEEE80211_OFDM6, "OFDM/6Mbps" }, \
{ IFM_IEEE80211_OFDM9, "OFDM/9Mbps" }, \
{ IFM_IEEE80211_OFDM12, "OFDM/12Mbps" }, \
{ IFM_IEEE80211_OFDM18, "OFDM/18Mbps" }, \
{ IFM_IEEE80211_OFDM24, "OFDM/24Mbps" }, \
{ IFM_IEEE80211_OFDM36, "OFDM/36Mbps" }, \
{ IFM_IEEE80211_OFDM48, "OFDM/48Mbps" }, \
{ IFM_IEEE80211_OFDM54, "OFDM/54Mbps" }, \
{ IFM_IEEE80211_OFDM72, "OFDM/72Mbps" }, \
{ IFM_IEEE80211_DS354k, "DS/354Kbps" }, \
{ IFM_IEEE80211_DS512k, "DS/512Kbps" }, \
{ IFM_IEEE80211_OFDM3, "OFDM/3Mbps" }, \
{ IFM_IEEE80211_OFDM4, "OFDM/4.5Mbps" }, \
{ IFM_IEEE80211_OFDM27, "OFDM/27Mbps" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_IEEE80211_ALIASES { \
{ IFM_IEEE80211_FH1, "FH1" }, \
{ IFM_IEEE80211_FH2, "FH2" }, \
{ IFM_IEEE80211_FH1, "FrequencyHopping/1Mbps" }, \
{ IFM_IEEE80211_FH2, "FrequencyHopping/2Mbps" }, \
{ IFM_IEEE80211_DS1, "DS1" }, \
{ IFM_IEEE80211_DS2, "DS2" }, \
{ IFM_IEEE80211_DS5, "DS5.5" }, \
{ IFM_IEEE80211_DS11, "DS11" }, \
{ IFM_IEEE80211_DS22, "DS22" }, \
{ IFM_IEEE80211_DS1, "DirectSequence/1Mbps" }, \
{ IFM_IEEE80211_DS2, "DirectSequence/2Mbps" }, \
{ IFM_IEEE80211_DS5, "DirectSequence/5.5Mbps" }, \
{ IFM_IEEE80211_DS11, "DirectSequence/11Mbps" }, \
{ IFM_IEEE80211_DS22, "DirectSequence/22Mbps" }, \
{ IFM_IEEE80211_OFDM6, "OFDM6" }, \
{ IFM_IEEE80211_OFDM9, "OFDM9" }, \
{ IFM_IEEE80211_OFDM12, "OFDM12" }, \
{ IFM_IEEE80211_OFDM18, "OFDM18" }, \
{ IFM_IEEE80211_OFDM24, "OFDM24" }, \
{ IFM_IEEE80211_OFDM36, "OFDM36" }, \
{ IFM_IEEE80211_OFDM48, "OFDM48" }, \
{ IFM_IEEE80211_OFDM54, "OFDM54" }, \
{ IFM_IEEE80211_OFDM72, "OFDM72" }, \
{ IFM_IEEE80211_DS1, "CCK1" }, \
{ IFM_IEEE80211_DS2, "CCK2" }, \
{ IFM_IEEE80211_DS5, "CCK5.5" }, \
{ IFM_IEEE80211_DS11, "CCK11" }, \
{ IFM_IEEE80211_DS354k, "DS354K" }, \
{ IFM_IEEE80211_DS354k, "DirectSequence/354Kbps" }, \
{ IFM_IEEE80211_DS512k, "DS512K" }, \
{ IFM_IEEE80211_DS512k, "DirectSequence/512Kbps" }, \
{ IFM_IEEE80211_OFDM3, "OFDM3" }, \
{ IFM_IEEE80211_OFDM4, "OFDM4.5" }, \
{ IFM_IEEE80211_OFDM27, "OFDM27" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_IEEE80211_OPTION_DESCRIPTIONS { \
{ IFM_IEEE80211_ADHOC, "adhoc" }, \
{ IFM_IEEE80211_HOSTAP, "hostap" }, \
{ IFM_IEEE80211_IBSS, "ibss" }, \
{ IFM_IEEE80211_WDS, "wds" }, \
{ IFM_IEEE80211_TURBO, "turbo" }, \
2003-07-21 02:49:42 +00:00
{ IFM_IEEE80211_MONITOR, "monitor" }, \
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
{ IFM_IEEE80211_MBSS, "mesh" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_IEEE80211_MODE_DESCRIPTIONS { \
{ IFM_AUTO, "autoselect" }, \
{ IFM_IEEE80211_11A, "11a" }, \
{ IFM_IEEE80211_11B, "11b" }, \
{ IFM_IEEE80211_11G, "11g" }, \
{ IFM_IEEE80211_FH, "fh" }, \
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
{ IFM_IEEE80211_11NA, "11na" }, \
{ IFM_IEEE80211_11NG, "11ng" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_IEEE80211_MODE_ALIASES { \
{ IFM_AUTO, "auto" }, \
{ 0, NULL }, \
}
# define IFM_SUBTYPE_ATM_DESCRIPTIONS { \
{ IFM_ATM_UNKNOWN, "Unknown" }, \
{ IFM_ATM_UTP_25, "UTP/25.6MBit" }, \
{ IFM_ATM_TAXI_100, "Taxi/100MBit" }, \
{ IFM_ATM_TAXI_140, "Taxi/140MBit" }, \
{ IFM_ATM_MM_155, "Multi-mode/155MBit" }, \
{ IFM_ATM_SM_155, "Single-mode/155MBit" }, \
{ IFM_ATM_UTP_155, "UTP/155MBit" }, \
{ IFM_ATM_MM_622, "Multi-mode/622MBit" }, \
{ IFM_ATM_SM_622, "Single-mode/622MBit" }, \
{ IFM_ATM_VIRTUAL, "Virtual" }, \
{ 0, NULL }, \
}
# define IFM_SUBTYPE_ATM_ALIASES { \
{ IFM_ATM_UNKNOWN, "UNKNOWN" }, \
{ IFM_ATM_UTP_25, "UTP-25" }, \
{ IFM_ATM_TAXI_100, "TAXI-100" }, \
{ IFM_ATM_TAXI_140, "TAXI-140" }, \
{ IFM_ATM_MM_155, "MM-155" }, \
{ IFM_ATM_SM_155, "SM-155" }, \
{ IFM_ATM_UTP_155, "UTP-155" }, \
{ IFM_ATM_MM_622, "MM-622" }, \
{ IFM_ATM_SM_622, "SM-622" }, \
{ IFM_ATM_VIRTUAL, "VIRTUAL" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_ATM_OPTION_DESCRIPTIONS { \
{ IFM_ATM_SDH, "SDH" }, \
{ IFM_ATM_NOSCRAMB, "Noscramb" }, \
{ IFM_ATM_UNASSIGNED, "Unassigned" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_SHARED_DESCRIPTIONS { \
{ IFM_AUTO, "autoselect" }, \
{ IFM_MANUAL, "manual" }, \
{ IFM_NONE, "none" }, \
{ 0, NULL }, \
}
#define IFM_SUBTYPE_SHARED_ALIASES { \
{ IFM_AUTO, "auto" }, \
{ 0, NULL }, \
}
#define IFM_SHARED_OPTION_DESCRIPTIONS { \
{ IFM_FDX, "full-duplex" }, \
{ IFM_HDX, "half-duplex" }, \
{ IFM_FLAG0, "flag0" }, \
{ IFM_FLAG1, "flag1" }, \
{ IFM_FLAG2, "flag2" }, \
{ IFM_LOOP, "hw-loopback" }, \
{ 0, NULL }, \
}
/*
* Baudrate descriptions for the various media types.
*/
struct ifmedia_baudrate {
int ifmb_word; /* media word */
uint64_t ifmb_baudrate; /* corresponding baudrate */
};
#define IFM_BAUDRATE_DESCRIPTIONS { \
{ IFM_ETHER | IFM_10_T, IF_Mbps(10) }, \
{ IFM_ETHER | IFM_10_2, IF_Mbps(10) }, \
{ IFM_ETHER | IFM_10_5, IF_Mbps(10) }, \
{ IFM_ETHER | IFM_100_TX, IF_Mbps(100) }, \
{ IFM_ETHER | IFM_100_FX, IF_Mbps(100) }, \
{ IFM_ETHER | IFM_100_T4, IF_Mbps(100) }, \
{ IFM_ETHER | IFM_100_VG, IF_Mbps(100) }, \
{ IFM_ETHER | IFM_100_T2, IF_Mbps(100) }, \
{ IFM_ETHER | IFM_1000_SX, IF_Mbps(1000) }, \
{ IFM_ETHER | IFM_10_STP, IF_Mbps(10) }, \
{ IFM_ETHER | IFM_10_FL, IF_Mbps(10) }, \
{ IFM_ETHER | IFM_1000_LX, IF_Mbps(1000) }, \
{ IFM_ETHER | IFM_1000_CX, IF_Mbps(1000) }, \
{ IFM_ETHER | IFM_1000_T, IF_Mbps(1000) }, \
{ IFM_ETHER | IFM_HPNA_1, IF_Mbps(1) }, \
{ IFM_ETHER | IFM_10G_LR, IF_Gbps(10ULL) }, \
{ IFM_ETHER | IFM_10G_SR, IF_Gbps(10ULL) }, \
{ IFM_ETHER | IFM_10G_CX4, IF_Gbps(10ULL) }, \
{ IFM_ETHER | IFM_2500_SX, IF_Mbps(2500ULL) }, \
{ IFM_ETHER | IFM_10G_TWINAX, IF_Gbps(10ULL) }, \
{ IFM_ETHER | IFM_10G_TWINAX_LONG, IF_Gbps(10ULL) }, \
{ IFM_ETHER | IFM_10G_LRM, IF_Gbps(10ULL) }, \
{ IFM_ETHER | IFM_10G_T, IF_Gbps(10ULL) }, \
\
{ IFM_TOKEN | IFM_TOK_STP4, IF_Mbps(4) }, \
{ IFM_TOKEN | IFM_TOK_STP16, IF_Mbps(16) }, \
{ IFM_TOKEN | IFM_TOK_UTP4, IF_Mbps(4) }, \
{ IFM_TOKEN | IFM_TOK_UTP16, IF_Mbps(16) }, \
\
{ IFM_FDDI | IFM_FDDI_SMF, IF_Mbps(100) }, \
{ IFM_FDDI | IFM_FDDI_MMF, IF_Mbps(100) }, \
{ IFM_FDDI | IFM_FDDI_UTP, IF_Mbps(100) }, \
\
{ IFM_IEEE80211 | IFM_IEEE80211_FH1, IF_Mbps(1) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_FH2, IF_Mbps(2) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_DS2, IF_Mbps(2) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_DS5, IF_Kbps(5500) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_DS11, IF_Mbps(11) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_DS1, IF_Mbps(1) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_DS22, IF_Mbps(22) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM6, IF_Mbps(6) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM9, IF_Mbps(9) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM12, IF_Mbps(12) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM18, IF_Mbps(18) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM24, IF_Mbps(24) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM36, IF_Mbps(36) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM48, IF_Mbps(48) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM54, IF_Mbps(54) }, \
{ IFM_IEEE80211 | IFM_IEEE80211_OFDM72, IF_Mbps(72) }, \
\
{ 0, 0 }, \
}
/*
* Status descriptions for the various media types.
*/
struct ifmedia_status_description {
int ifms_type;
int ifms_valid;
int ifms_bit;
const char *ifms_string[2];
};
#define IFM_STATUS_DESC(ifms, bit) \
(ifms)->ifms_string[((ifms)->ifms_bit & (bit)) ? 1 : 0]
#define IFM_STATUS_DESCRIPTIONS { \
{ IFM_ETHER, IFM_AVALID, IFM_ACTIVE, \
{ "no carrier", "active" } }, \
{ IFM_FDDI, IFM_AVALID, IFM_ACTIVE, \
{ "no ring", "inserted" } }, \
{ IFM_TOKEN, IFM_AVALID, IFM_ACTIVE, \
{ "no ring", "inserted" } }, \
{ IFM_IEEE80211, IFM_AVALID, IFM_ACTIVE, \
{ "no network", "active" } }, \
{ IFM_ATM, IFM_AVALID, IFM_ACTIVE, \
{ "no network", "active" } }, \
{ IFM_CARP, IFM_AVALID, IFM_ACTIVE, \
{ "backup", "master" } }, \
{ 0, 0, 0, \
{ NULL, NULL } } \
}
#endif /* _NET_IF_MEDIA_H_ */