freebsd-dev/sys/dev/usb2/include/usb2_standard.h

/* $FreeBSD$ */
/*-
 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
 * Copyright (c) 1998 Lennart Augustsson. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifndef _USB2_STANDARD_H_
#define	_USB2_STANDARD_H_

#include <dev/usb2/include/usb2_endian.h>

/*
 * Minimum time a device needs to be powered down to go through a
 * power cycle. These values are not in the USB specification.
 */
#define	USB_POWER_DOWN_TIME	200	/* ms */
#define	USB_PORT_POWER_DOWN_TIME	100	/* ms */

#if 0
/* These are the values from the USB specification. */
#define	USB_PORT_RESET_DELAY	10	/* ms */
#define	USB_PORT_ROOT_RESET_DELAY 50	/* ms */
#define	USB_PORT_RESET_RECOVERY	10	/* ms */
#define	USB_PORT_POWERUP_DELAY	100	/* ms */
#define	USB_SET_ADDRESS_SETTLE	2	/* ms */
#define	USB_RESUME_DELAY	(20*5)	/* ms */
#define	USB_RESUME_WAIT		10	/* ms */
#define	USB_RESUME_RECOVERY	10	/* ms */
#define	USB_EXTRA_POWER_UP_TIME	0	/* ms */
#else
/* Allow for marginal and non-conforming devices. */
#define	USB_PORT_RESET_DELAY	50	/* ms */
#define	USB_PORT_ROOT_RESET_DELAY 250	/* ms */
#define	USB_PORT_RESET_RECOVERY	250	/* ms */
#define	USB_PORT_POWERUP_DELAY	300	/* ms */
#define	USB_SET_ADDRESS_SETTLE	10	/* ms */
#define	USB_RESUME_DELAY	(50*5)	/* ms */
#define	USB_RESUME_WAIT		50	/* ms */
#define	USB_RESUME_RECOVERY	50	/* ms */
#define	USB_EXTRA_POWER_UP_TIME	20	/* ms */
#endif

#define	USB_MIN_POWER		100	/* mA */
#define	USB_MAX_POWER		500	/* mA */

#define	USB_BUS_RESET_DELAY	100	/* ms */

/*
 * USB record layout in memory:
 *
 * - USB config 0
 *   - USB interfaces
 *     - USB alternative interfaces
 *       - USB pipes
 *
 * - USB config 1
 *   - USB interfaces
 *     - USB alternative interfaces
 *       - USB pipes
 */

/* Declaration of USB records */

struct usb2_device_request {
	uByte	bmRequestType;
	uByte	bRequest;
	uWord	wValue;
	uWord	wIndex;
	uWord	wLength;
} __packed;

#define	UT_WRITE		0x00
#define	UT_READ			0x80
#define	UT_STANDARD		0x00
#define	UT_CLASS		0x20
#define	UT_VENDOR		0x40
#define	UT_DEVICE		0x00
#define	UT_INTERFACE		0x01
#define	UT_ENDPOINT		0x02
#define	UT_OTHER		0x03

#define	UT_READ_DEVICE		(UT_READ  | UT_STANDARD | UT_DEVICE)
#define	UT_READ_INTERFACE	(UT_READ  | UT_STANDARD | UT_INTERFACE)
#define	UT_READ_ENDPOINT	(UT_READ  | UT_STANDARD | UT_ENDPOINT)
#define	UT_WRITE_DEVICE		(UT_WRITE | UT_STANDARD | UT_DEVICE)
#define	UT_WRITE_INTERFACE	(UT_WRITE | UT_STANDARD | UT_INTERFACE)
#define	UT_WRITE_ENDPOINT	(UT_WRITE | UT_STANDARD | UT_ENDPOINT)
#define	UT_READ_CLASS_DEVICE	(UT_READ  | UT_CLASS | UT_DEVICE)
#define	UT_READ_CLASS_INTERFACE	(UT_READ  | UT_CLASS | UT_INTERFACE)
#define	UT_READ_CLASS_OTHER	(UT_READ  | UT_CLASS | UT_OTHER)
#define	UT_READ_CLASS_ENDPOINT	(UT_READ  | UT_CLASS | UT_ENDPOINT)
#define	UT_WRITE_CLASS_DEVICE	(UT_WRITE | UT_CLASS | UT_DEVICE)
#define	UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
#define	UT_WRITE_CLASS_OTHER	(UT_WRITE | UT_CLASS | UT_OTHER)
#define	UT_WRITE_CLASS_ENDPOINT	(UT_WRITE | UT_CLASS | UT_ENDPOINT)
#define	UT_READ_VENDOR_DEVICE	(UT_READ  | UT_VENDOR | UT_DEVICE)
#define	UT_READ_VENDOR_INTERFACE (UT_READ  | UT_VENDOR | UT_INTERFACE)
#define	UT_READ_VENDOR_OTHER	(UT_READ  | UT_VENDOR | UT_OTHER)
#define	UT_READ_VENDOR_ENDPOINT	(UT_READ  | UT_VENDOR | UT_ENDPOINT)
#define	UT_WRITE_VENDOR_DEVICE	(UT_WRITE | UT_VENDOR | UT_DEVICE)
#define	UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
#define	UT_WRITE_VENDOR_OTHER	(UT_WRITE | UT_VENDOR | UT_OTHER)
#define	UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)

/* Requests */
#define	UR_GET_STATUS		0x00
#define	UR_CLEAR_FEATURE	0x01
#define	UR_SET_FEATURE		0x03
#define	UR_SET_ADDRESS		0x05
#define	UR_GET_DESCRIPTOR	0x06
#define	UDESC_DEVICE		0x01
#define	UDESC_CONFIG		0x02
#define	UDESC_STRING		0x03
#define	USB_LANGUAGE_TABLE 0x00		/* Index of the language ID table
					 * string */
#define	UDESC_INTERFACE	0x04
#define	UDESC_ENDPOINT		0x05
#define	UDESC_DEVICE_QUALIFIER	0x06
#define	UDESC_OTHER_SPEED_CONFIGURATION 0x07
#define	UDESC_INTERFACE_POWER	0x08
#define	UDESC_OTG		0x09
#define	UDESC_CS_DEVICE	0x21		/* class specific */
#define	UDESC_CS_CONFIG	0x22
#define	UDESC_CS_STRING	0x23
#define	UDESC_CS_INTERFACE	0x24
#define	UDESC_CS_ENDPOINT	0x25
#define	UDESC_HUB		0x29
#define	UR_SET_DESCRIPTOR	0x07
#define	UR_GET_CONFIG		0x08
#define	UR_SET_CONFIG		0x09
#define	UR_GET_INTERFACE	0x0a
#define	UR_SET_INTERFACE	0x0b
#define	UR_SYNCH_FRAME		0x0c

/* HUB specific request */
#define	UR_GET_BUS_STATE	0x02
#define	UR_CLEAR_TT_BUFFER	0x08
#define	UR_RESET_TT		0x09
#define	UR_GET_TT_STATE		0x0a
#define	UR_STOP_TT		0x0b

/* Feature numbers */
#define	UF_ENDPOINT_HALT	0
#define	UF_DEVICE_REMOTE_WAKEUP	1
#define	UF_TEST_MODE		2

/* HUB specific features */
#define	UHF_C_HUB_LOCAL_POWER	0
#define	UHF_C_HUB_OVER_CURRENT	1
#define	UHF_PORT_CONNECTION	0
#define	UHF_PORT_ENABLE		1
#define	UHF_PORT_SUSPEND	2
#define	UHF_PORT_OVER_CURRENT	3
#define	UHF_PORT_RESET		4
#define	UHF_PORT_POWER		8
#define	UHF_PORT_LOW_SPEED	9
#define	UHF_C_PORT_CONNECTION	16
#define	UHF_C_PORT_ENABLE	17
#define	UHF_C_PORT_SUSPEND	18
#define	UHF_C_PORT_OVER_CURRENT	19
#define	UHF_C_PORT_RESET	20
#define	UHF_PORT_TEST		21
#define	UHF_PORT_INDICATOR	22

struct usb2_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uByte	bDescriptorSubtype;
} __packed;

struct usb2_device_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uWord	bcdUSB;
#define	UD_USB_2_0		0x0200
#define	UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0)
	uByte	bDeviceClass;
	uByte	bDeviceSubClass;
	uByte	bDeviceProtocol;
	uByte	bMaxPacketSize;
	/* The fields below are not part of the initial descriptor. */
	uWord	idVendor;
	uWord	idProduct;
	uWord	bcdDevice;
	uByte	iManufacturer;
	uByte	iProduct;
	uByte	iSerialNumber;
	uByte	bNumConfigurations;
} __packed;

/* Device class codes */
#define	UDCLASS_IN_INTERFACE	0x00
#define	UDCLASS_COMM		0x02
#define	UDCLASS_HUB		0x09
#define	UDSUBCLASS_HUB		0x00
#define	UDPROTO_FSHUB		0x00
#define	UDPROTO_HSHUBSTT	0x01
#define	UDPROTO_HSHUBMTT	0x02
#define	UDCLASS_DIAGNOSTIC	0xdc
#define	UDCLASS_WIRELESS	0xe0
#define	UDSUBCLASS_RF		0x01
#define	UDPROTO_BLUETOOTH	0x01
#define	UDCLASS_VENDOR		0xff

struct usb2_config_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uWord	wTotalLength;
	uByte	bNumInterface;
	uByte	bConfigurationValue;
#define	USB_UNCONFIG_NO 0
	uByte	iConfiguration;
	uByte	bmAttributes;
#define	UC_BUS_POWERED		0x80
#define	UC_SELF_POWERED		0x40
#define	UC_REMOTE_WAKEUP	0x20
	uByte	bMaxPower;		/* max current in 2 mA units */
#define	UC_POWER_FACTOR 2
} __packed;

struct usb2_interface_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uByte	bInterfaceNumber;
	uByte	bAlternateSetting;
	uByte	bNumEndpoints;
	uByte	bInterfaceClass;
	uByte	bInterfaceSubClass;
	uByte	bInterfaceProtocol;
	uByte	iInterface;
} __packed;

/* Interface class codes */
#define	UICLASS_UNSPEC		0x00
#define	UICLASS_AUDIO		0x01	/* audio */
#define	UISUBCLASS_AUDIOCONTROL	1
#define	UISUBCLASS_AUDIOSTREAM		2
#define	UISUBCLASS_MIDISTREAM		3

#define	UICLASS_CDC		0x02	/* communication */
#define	UISUBCLASS_DIRECT_LINE_CONTROL_MODEL	1
#define	UISUBCLASS_ABSTRACT_CONTROL_MODEL	2
#define	UISUBCLASS_TELEPHONE_CONTROL_MODEL	3
#define	UISUBCLASS_MULTICHANNEL_CONTROL_MODEL	4
#define	UISUBCLASS_CAPI_CONTROLMODEL		5
#define	UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
#define	UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
#define	UISUBCLASS_WIRELESS_HANDSET_CM 8
#define	UISUBCLASS_DEVICE_MGMT 9
#define	UISUBCLASS_MOBILE_DIRECT_LINE_MODEL 10
#define	UISUBCLASS_OBEX 11
#define	UISUBCLASS_ETHERNET_EMULATION_MODEL 12

#define	UIPROTO_CDC_AT			1
#define	UIPROTO_CDC_ETH_512X4 0x76	/* FreeBSD specific */

#define	UICLASS_HID		0x03
#define	UISUBCLASS_BOOT		1
#define	UIPROTO_BOOT_KEYBOARD	1
#define	UIPROTO_MOUSE		2

#define	UICLASS_PHYSICAL	0x05
#define	UICLASS_IMAGE		0x06
#define	UISUBCLASS_SIC		1	/* still image class */
#define	UICLASS_PRINTER		0x07
#define	UISUBCLASS_PRINTER	1
#define	UIPROTO_PRINTER_UNI	1
#define	UIPROTO_PRINTER_BI	2
#define	UIPROTO_PRINTER_1284	3

#define	UICLASS_MASS		0x08
#define	UISUBCLASS_RBC		1
#define	UISUBCLASS_SFF8020I	2
#define	UISUBCLASS_QIC157	3
#define	UISUBCLASS_UFI		4
#define	UISUBCLASS_SFF8070I	5
#define	UISUBCLASS_SCSI		6
#define	UIPROTO_MASS_CBI_I	0
#define	UIPROTO_MASS_CBI	1
#define	UIPROTO_MASS_BBB_OLD	2	/* Not in the spec anymore */
#define	UIPROTO_MASS_BBB	80	/* 'P' for the Iomega Zip drive */

#define	UICLASS_HUB		0x09
#define	UISUBCLASS_HUB		0
#define	UIPROTO_FSHUB		0
#define	UIPROTO_HSHUBSTT	0	/* Yes, same as previous */
#define	UIPROTO_HSHUBMTT	1

#define	UICLASS_CDC_DATA	0x0a
#define	UISUBCLASS_DATA		0
#define	UIPROTO_DATA_ISDNBRI		0x30	/* Physical iface */
#define	UIPROTO_DATA_HDLC		0x31	/* HDLC */
#define	UIPROTO_DATA_TRANSPARENT	0x32	/* Transparent */
#define	UIPROTO_DATA_Q921M		0x50	/* Management for Q921 */
#define	UIPROTO_DATA_Q921		0x51	/* Data for Q921 */
#define	UIPROTO_DATA_Q921TM		0x52	/* TEI multiplexer for Q921 */
#define	UIPROTO_DATA_V42BIS		0x90	/* Data compression */
#define	UIPROTO_DATA_Q931		0x91	/* Euro-ISDN */
#define	UIPROTO_DATA_V120		0x92	/* V.24 rate adaption */
#define	UIPROTO_DATA_CAPI		0x93	/* CAPI 2.0 commands */
#define	UIPROTO_DATA_HOST_BASED		0xfd	/* Host based driver */
#define	UIPROTO_DATA_PUF		0xfe	/* see Prot. Unit Func. Desc. */
#define	UIPROTO_DATA_VENDOR		0xff	/* Vendor specific */

#define	UICLASS_SMARTCARD	0x0b
#define	UICLASS_FIRM_UPD	0x0c
#define	UICLASS_SECURITY	0x0d
#define	UICLASS_DIAGNOSTIC	0xdc
#define	UICLASS_WIRELESS	0xe0
#define	UISUBCLASS_RF			0x01
#define	UIPROTO_BLUETOOTH		0x01

#define	UICLASS_APPL_SPEC	0xfe
#define	UISUBCLASS_FIRMWARE_DOWNLOAD	1
#define	UISUBCLASS_IRDA			2
#define	UIPROTO_IRDA			0

#define	UICLASS_VENDOR		0xff
#define	UISUBCLASS_XBOX360_CONTROLLER	0x5d
#define	UIPROTO_XBOX360_GAMEPAD	0x01

struct usb2_endpoint_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uByte	bEndpointAddress;
#define	UE_GET_DIR(a)	((a) & 0x80)
#define	UE_SET_DIR(a,d)	((a) | (((d)&1) << 7))
#define	UE_DIR_IN	0x80
#define	UE_DIR_OUT	0x00
#define	UE_DIR_ANY	0xff		/* for internal use only! */
#define	UE_ADDR		0x0f
#define	UE_ADDR_ANY	0xff		/* for internal use only! */
#define	UE_GET_ADDR(a)	((a) & UE_ADDR)
	uByte	bmAttributes;
#define	UE_XFERTYPE	0x03
#define	UE_CONTROL	0x00
#define	UE_ISOCHRONOUS	0x01
#define	UE_BULK	0x02
#define	UE_INTERRUPT	0x03
#define	UE_BULK_INTR	0xfe		/* for internal use only! */
#define	UE_TYPE_ANY	0xff		/* for internal use only! */
#define	UE_GET_XFERTYPE(a)	((a) & UE_XFERTYPE)
#define	UE_ISO_TYPE	0x0c
#define	UE_ISO_ASYNC	0x04
#define	UE_ISO_ADAPT	0x08
#define	UE_ISO_SYNC	0x0c
#define	UE_GET_ISO_TYPE(a)	((a) & UE_ISO_TYPE)
	uWord	wMaxPacketSize;
#define	UE_ZERO_MPS 0xFFFF		/* for internal use only */
	uByte	bInterval;
} __packed;

struct usb2_string_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uWord	bString[126];
	uByte	bUnused;
} __packed;

#define	USB_MAKE_STRING_DESC(m,name)	\
struct name {				\
  uByte bLength;			\
  uByte bDescriptorType;		\
  uByte bData[sizeof((uint8_t []){m})];	\
} __packed;				\
static const struct name name = {	\
  .bLength = sizeof(struct name),	\
  .bDescriptorType = UDESC_STRING,	\
  .bData = { m },			\
}

struct usb2_hub_descriptor {
	uByte	bDescLength;
	uByte	bDescriptorType;
	uByte	bNbrPorts;
	uWord	wHubCharacteristics;
#define	UHD_PWR			0x0003
#define	UHD_PWR_GANGED		0x0000
#define	UHD_PWR_INDIVIDUAL	0x0001
#define	UHD_PWR_NO_SWITCH	0x0002
#define	UHD_COMPOUND		0x0004
#define	UHD_OC			0x0018
#define	UHD_OC_GLOBAL		0x0000
#define	UHD_OC_INDIVIDUAL	0x0008
#define	UHD_OC_NONE		0x0010
#define	UHD_TT_THINK		0x0060
#define	UHD_TT_THINK_8		0x0000
#define	UHD_TT_THINK_16		0x0020
#define	UHD_TT_THINK_24		0x0040
#define	UHD_TT_THINK_32		0x0060
#define	UHD_PORT_IND		0x0080
	uByte	bPwrOn2PwrGood;		/* delay in 2 ms units */
#define	UHD_PWRON_FACTOR 2
	uByte	bHubContrCurrent;
	uByte	DeviceRemovable[32];	/* max 255 ports */
#define	UHD_NOT_REMOV(desc, i) \
    (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
	 /* deprecated */ uByte PortPowerCtrlMask[1];
} __packed;

/* minimum HUB descriptor (8-ports maximum) */
struct usb2_hub_descriptor_min {
	uByte	bDescLength;
	uByte	bDescriptorType;
	uByte	bNbrPorts;
	uWord	wHubCharacteristics;
	uByte	bPwrOn2PwrGood;
	uByte	bHubContrCurrent;
	uByte	DeviceRemovable[1];
	uByte	PortPowerCtrlMask[1];
} __packed;

struct usb2_device_qualifier {
	uByte	bLength;
	uByte	bDescriptorType;
	uWord	bcdUSB;
	uByte	bDeviceClass;
	uByte	bDeviceSubClass;
	uByte	bDeviceProtocol;
	uByte	bMaxPacketSize0;
	uByte	bNumConfigurations;
	uByte	bReserved;
} __packed;

struct usb2_otg_descriptor {
	uByte	bLength;
	uByte	bDescriptorType;
	uByte	bmAttributes;
#define	UOTG_SRP	0x01
#define	UOTG_HNP	0x02
} __packed;

/* OTG feature selectors */
#define	UOTG_B_HNP_ENABLE	3
#define	UOTG_A_HNP_SUPPORT	4
#define	UOTG_A_ALT_HNP_SUPPORT	5

struct usb2_status {
	uWord	wStatus;
/* Device status flags */
#define	UDS_SELF_POWERED		0x0001
#define	UDS_REMOTE_WAKEUP		0x0002
/* Endpoint status flags */
#define	UES_HALT			0x0001
} __packed;

struct usb2_hub_status {
	uWord	wHubStatus;
#define	UHS_LOCAL_POWER			0x0001
#define	UHS_OVER_CURRENT		0x0002
	uWord	wHubChange;
} __packed;

struct usb2_port_status {
	uWord	wPortStatus;
#define	UPS_CURRENT_CONNECT_STATUS	0x0001
#define	UPS_PORT_ENABLED		0x0002
#define	UPS_SUSPEND			0x0004
#define	UPS_OVERCURRENT_INDICATOR	0x0008
#define	UPS_RESET			0x0010
#define	UPS_PORT_MODE_DEVICE		0x0020	/* currently FreeBSD specific */
#define	UPS_PORT_POWER			0x0100
#define	UPS_LOW_SPEED			0x0200
#define	UPS_HIGH_SPEED			0x0400
#define	UPS_PORT_TEST			0x0800
#define	UPS_PORT_INDICATOR		0x1000
	uWord	wPortChange;
#define	UPS_C_CONNECT_STATUS		0x0001
#define	UPS_C_PORT_ENABLED		0x0002
#define	UPS_C_SUSPEND			0x0004
#define	UPS_C_OVERCURRENT_INDICATOR	0x0008
#define	UPS_C_PORT_RESET		0x0010
} __packed;

#endif					/* _USB2_STANDARD_H_ */