freebsd-dev/sys/dev/sound/pcm/vchan.c

991 lines
22 KiB
C
Raw Normal View History

/*-
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
* Copyright (c) 2006-2009 Ariff Abdullah <ariff@FreeBSD.org>
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
* Copyright (c) 2001 Cameron Grant <cg@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* Almost entirely rewritten to add multi-format/channels mixing support. */
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_snd.h"
#endif
#include <dev/sound/pcm/sound.h>
#include <dev/sound/pcm/vchan.h>
SND_DECLARE_FILE("$FreeBSD$");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
/*
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
* [ac3 , dts , linear , 0, linear, 0]
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
*/
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
#define FMTLIST_MAX 6
#define FMTLIST_OFFSET 4
#define DIGFMTS_MAX 2
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
#ifdef SND_DEBUG
static int snd_passthrough_verbose = 0;
SYSCTL_INT(_hw_snd, OID_AUTO, passthrough_verbose, CTLFLAG_RW,
&snd_passthrough_verbose, 0, "passthrough verbosity");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
#endif
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct vchan_info {
struct pcm_channel *channel;
struct pcmchan_caps caps;
uint32_t fmtlist[FMTLIST_MAX];
int trigger;
};
static void *
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
vchan_init(kobj_t obj, void *devinfo, struct snd_dbuf *b,
struct pcm_channel *c, int dir)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct vchan_info *info;
struct pcm_channel *p;
uint32_t i, j, *fmtlist;
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
KASSERT(dir == PCMDIR_PLAY || dir == PCMDIR_REC,
("vchan_init: bad direction"));
KASSERT(c != NULL && c->parentchannel != NULL,
("vchan_init: bad channels"));
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
info = malloc(sizeof(*info), M_DEVBUF, M_WAITOK | M_ZERO);
info->channel = c;
info->trigger = PCMTRIG_STOP;
p = c->parentchannel;
CHN_LOCK(p);
fmtlist = chn_getcaps(p)->fmtlist;
for (i = 0, j = 0; fmtlist[i] != 0 && j < DIGFMTS_MAX; i++) {
if (fmtlist[i] & AFMT_PASSTHROUGH)
info->fmtlist[j++] = fmtlist[i];
}
if (p->format & AFMT_VCHAN)
info->fmtlist[j] = p->format;
else
info->fmtlist[j] = VCHAN_DEFAULT_FORMAT;
info->caps.fmtlist = info->fmtlist +
((p->flags & CHN_F_VCHAN_DYNAMIC) ? 0 : FMTLIST_OFFSET);
CHN_UNLOCK(p);
c->flags |= CHN_F_VIRTUAL;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (info);
}
static int
vchan_free(kobj_t obj, void *data)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
free(data, M_DEVBUF);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (0);
}
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
vchan_setformat(kobj_t obj, void *data, uint32_t format)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct vchan_info *info;
info = data;
CHN_LOCKASSERT(info->channel);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (!snd_fmtvalid(format, info->caps.fmtlist))
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (-1);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (0);
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
static uint32_t
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
vchan_setspeed(kobj_t obj, void *data, uint32_t speed)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct vchan_info *info;
info = data;
CHN_LOCKASSERT(info->channel);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (info->caps.maxspeed);
}
static int
vchan_trigger(kobj_t obj, void *data, int go)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct vchan_info *info;
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
struct pcm_channel *c, *p;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
int ret, otrigger;
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
info = data;
if (!PCMTRIG_COMMON(go) || go == info->trigger)
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (0);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
c = info->channel;
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
p = c->parentchannel;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
otrigger = info->trigger;
info->trigger = go;
CHN_LOCKASSERT(c);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
CHN_UNLOCK(c);
CHN_LOCK(p);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
switch (go) {
case PCMTRIG_START:
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (otrigger != PCMTRIG_START)
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
CHN_INSERT_HEAD(p, c, children.busy);
break;
case PCMTRIG_STOP:
case PCMTRIG_ABORT:
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (otrigger == PCMTRIG_START)
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
CHN_REMOVE(p, c, children.busy);
break;
default:
break;
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
ret = chn_notify(p, CHN_N_TRIGGER);
CHN_LOCK(c);
if (ret == 0 && go == PCMTRIG_START && VCHAN_SYNC_REQUIRED(c))
ret = vchan_sync(c);
CHN_UNLOCK(c);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
CHN_UNLOCK(p);
CHN_LOCK(c);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (ret);
}
static struct pcmchan_caps *
vchan_getcaps(kobj_t obj, void *data)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct vchan_info *info;
struct pcm_channel *c;
uint32_t pformat, pspeed, pflags, i;
info = data;
c = info->channel;
pformat = c->parentchannel->format;
pspeed = c->parentchannel->speed;
pflags = c->parentchannel->flags;
CHN_LOCKASSERT(c);
if (pflags & CHN_F_VCHAN_DYNAMIC) {
info->caps.fmtlist = info->fmtlist;
if (pformat & AFMT_VCHAN) {
for (i = 0; info->caps.fmtlist[i] != 0; i++) {
if (info->caps.fmtlist[i] & AFMT_PASSTHROUGH)
continue;
break;
}
info->caps.fmtlist[i] = pformat;
}
if (c->format & AFMT_PASSTHROUGH)
info->caps.minspeed = c->speed;
else
info->caps.minspeed = pspeed;
info->caps.maxspeed = info->caps.minspeed;
} else {
info->caps.fmtlist = info->fmtlist + FMTLIST_OFFSET;
if (pformat & AFMT_VCHAN)
info->caps.fmtlist[0] = pformat;
else {
device_printf(c->dev,
"%s(): invalid vchan format 0x%08x",
__func__, pformat);
info->caps.fmtlist[0] = VCHAN_DEFAULT_FORMAT;
}
info->caps.minspeed = pspeed;
info->caps.maxspeed = info->caps.minspeed;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (&info->caps);
}
static struct pcmchan_matrix *
vchan_getmatrix(kobj_t obj, void *data, uint32_t format)
{
return (feeder_matrix_format_map(format));
}
static kobj_method_t vchan_methods[] = {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(channel_init, vchan_init),
KOBJMETHOD(channel_free, vchan_free),
KOBJMETHOD(channel_setformat, vchan_setformat),
KOBJMETHOD(channel_setspeed, vchan_setspeed),
KOBJMETHOD(channel_trigger, vchan_trigger),
KOBJMETHOD(channel_getcaps, vchan_getcaps),
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
KOBJMETHOD(channel_getmatrix, vchan_getmatrix),
KOBJMETHOD_END
};
CHANNEL_DECLARE(vchan);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
static void
pcm_getparentchannel(struct snddev_info *d,
struct pcm_channel **wrch, struct pcm_channel **rdch)
{
struct pcm_channel **ch, *wch, *rch, *c;
KASSERT(d != NULL, ("%s(): NULL snddev_info", __func__));
PCM_BUSYASSERT(d);
PCM_UNLOCKASSERT(d);
wch = NULL;
rch = NULL;
CHN_FOREACH(c, d, channels.pcm) {
CHN_LOCK(c);
ch = (c->direction == PCMDIR_PLAY) ? &wch : &rch;
if (c->flags & CHN_F_VIRTUAL) {
/* Sanity check */
if (*ch != NULL && *ch != c->parentchannel) {
CHN_UNLOCK(c);
*ch = NULL;
break;
}
} else if (c->flags & CHN_F_HAS_VCHAN) {
/* No way!! */
if (*ch != NULL) {
CHN_UNLOCK(c);
*ch = NULL;
break;
}
*ch = c;
}
CHN_UNLOCK(c);
}
if (wrch != NULL)
*wrch = wch;
if (rdch != NULL)
*rdch = rch;
}
static int
sysctl_dev_pcm_vchans(SYSCTL_HANDLER_ARGS)
{
struct snddev_info *d;
int direction, vchancount;
int err, cnt;
d = devclass_get_softc(pcm_devclass, VCHAN_SYSCTL_UNIT(oidp->oid_arg1));
if (!PCM_REGISTERED(d) || !(d->flags & SD_F_AUTOVCHAN))
return (EINVAL);
PCM_LOCK(d);
PCM_WAIT(d);
switch (VCHAN_SYSCTL_DIR(oidp->oid_arg1)) {
case VCHAN_PLAY:
direction = PCMDIR_PLAY;
vchancount = d->pvchancount;
cnt = d->playcount;
break;
case VCHAN_REC:
direction = PCMDIR_REC;
vchancount = d->rvchancount;
cnt = d->reccount;
break;
default:
PCM_UNLOCK(d);
return (EINVAL);
break;
}
if (cnt < 1) {
PCM_UNLOCK(d);
return (ENODEV);
}
PCM_ACQUIRE(d);
PCM_UNLOCK(d);
cnt = vchancount;
err = sysctl_handle_int(oidp, &cnt, 0, req);
if (err == 0 && req->newptr != NULL && vchancount != cnt) {
if (cnt < 0)
cnt = 0;
if (cnt > SND_MAXVCHANS)
cnt = SND_MAXVCHANS;
err = pcm_setvchans(d, direction, cnt, -1);
}
PCM_RELEASE_QUICK(d);
return err;
}
static int
sysctl_dev_pcm_vchanmode(SYSCTL_HANDLER_ARGS)
{
struct snddev_info *d;
struct pcm_channel *c;
uint32_t dflags;
int direction, ret;
char dtype[16];
d = devclass_get_softc(pcm_devclass, VCHAN_SYSCTL_UNIT(oidp->oid_arg1));
if (!PCM_REGISTERED(d) || !(d->flags & SD_F_AUTOVCHAN))
return (EINVAL);
PCM_LOCK(d);
PCM_WAIT(d);
switch (VCHAN_SYSCTL_DIR(oidp->oid_arg1)) {
case VCHAN_PLAY:
direction = PCMDIR_PLAY;
break;
case VCHAN_REC:
direction = PCMDIR_REC;
break;
default:
PCM_UNLOCK(d);
return (EINVAL);
break;
}
PCM_ACQUIRE(d);
PCM_UNLOCK(d);
if (direction == PCMDIR_PLAY)
pcm_getparentchannel(d, &c, NULL);
else
pcm_getparentchannel(d, NULL, &c);
if (c == NULL) {
PCM_RELEASE_QUICK(d);
return (EINVAL);
}
KASSERT(direction == c->direction, ("%s(): invalid direction %d/%d",
__func__, direction, c->direction));
CHN_LOCK(c);
if (c->flags & CHN_F_VCHAN_PASSTHROUGH)
strlcpy(dtype, "passthrough", sizeof(dtype));
else if (c->flags & CHN_F_VCHAN_ADAPTIVE)
strlcpy(dtype, "adaptive", sizeof(dtype));
else
strlcpy(dtype, "fixed", sizeof(dtype));
CHN_UNLOCK(c);
ret = sysctl_handle_string(oidp, dtype, sizeof(dtype), req);
if (ret == 0 && req->newptr != NULL) {
if (strcasecmp(dtype, "passthrough") == 0 ||
strcmp(dtype, "1") == 0)
dflags = CHN_F_VCHAN_PASSTHROUGH;
else if (strcasecmp(dtype, "adaptive") == 0 ||
strcmp(dtype, "2") == 0)
dflags = CHN_F_VCHAN_ADAPTIVE;
else if (strcasecmp(dtype, "fixed") == 0 ||
strcmp(dtype, "0") == 0)
dflags = 0;
else {
PCM_RELEASE_QUICK(d);
return (EINVAL);
}
CHN_LOCK(c);
if (dflags == (c->flags & CHN_F_VCHAN_DYNAMIC) ||
(c->flags & CHN_F_PASSTHROUGH)) {
CHN_UNLOCK(c);
PCM_RELEASE_QUICK(d);
return (0);
}
c->flags &= ~CHN_F_VCHAN_DYNAMIC;
c->flags |= dflags;
CHN_UNLOCK(c);
}
PCM_RELEASE_QUICK(d);
return (ret);
}
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
/*
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
* On the fly vchan rate/format settings
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
*/
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
#define VCHAN_ACCESSIBLE(c) (!((c)->flags & (CHN_F_PASSTHROUGH | \
CHN_F_EXCLUSIVE)) && \
(((c)->flags & CHN_F_VCHAN_DYNAMIC) || \
CHN_STOPPED(c)))
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
static int
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchanrate(SYSCTL_HANDLER_ARGS)
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
{
struct snddev_info *d;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct pcm_channel *c, *ch;
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
struct pcmchan_caps *caps;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
int *vchanrate, vchancount, direction, ret, newspd, restart;
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
d = devclass_get_softc(pcm_devclass, VCHAN_SYSCTL_UNIT(oidp->oid_arg1));
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
if (!PCM_REGISTERED(d) || !(d->flags & SD_F_AUTOVCHAN))
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_LOCK(d);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_WAIT(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
switch (VCHAN_SYSCTL_DIR(oidp->oid_arg1)) {
case VCHAN_PLAY:
direction = PCMDIR_PLAY;
vchancount = d->pvchancount;
vchanrate = &d->pvchanrate;
break;
case VCHAN_REC:
direction = PCMDIR_REC;
vchancount = d->rvchancount;
vchanrate = &d->rvchanrate;
break;
default:
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
break;
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
if (vchancount < 1) {
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_ACQUIRE(d);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (direction == PCMDIR_PLAY)
pcm_getparentchannel(d, &c, NULL);
else
pcm_getparentchannel(d, NULL, &c);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (c == NULL) {
PCM_RELEASE_QUICK(d);
return (EINVAL);
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
KASSERT(direction == c->direction, ("%s(): invalid direction %d/%d",
__func__, direction, c->direction));
CHN_LOCK(c);
newspd = c->speed;
CHN_UNLOCK(c);
ret = sysctl_handle_int(oidp, &newspd, 0, req);
if (ret != 0 || req->newptr == NULL) {
PCM_RELEASE_QUICK(d);
return (ret);
}
if (newspd < 1 || newspd < feeder_rate_min ||
newspd > feeder_rate_max) {
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_RELEASE_QUICK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_LOCK(c);
if (newspd != c->speed && VCHAN_ACCESSIBLE(c)) {
if (CHN_STARTED(c)) {
chn_abort(c);
restart = 1;
} else
restart = 0;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (feeder_rate_round) {
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
caps = chn_getcaps(c);
RANGE(newspd, caps->minspeed, caps->maxspeed);
newspd = CHANNEL_SETSPEED(c->methods,
c->devinfo, newspd);
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
ret = chn_reset(c, c->format, newspd);
if (ret == 0) {
*vchanrate = c->speed;
if (restart != 0) {
CHN_FOREACH(ch, c, children.busy) {
CHN_LOCK(ch);
if (VCHAN_SYNC_REQUIRED(ch))
vchan_sync(ch);
CHN_UNLOCK(ch);
}
c->flags |= CHN_F_DIRTY;
ret = chn_start(c, 1);
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
}
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_UNLOCK(c);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_RELEASE_QUICK(d);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (ret);
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static int
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchanformat(SYSCTL_HANDLER_ARGS)
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
{
struct snddev_info *d;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct pcm_channel *c, *ch;
uint32_t newfmt;
int *vchanformat, vchancount, direction, ret, restart;
char fmtstr[AFMTSTR_LEN];
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
d = devclass_get_softc(pcm_devclass, VCHAN_SYSCTL_UNIT(oidp->oid_arg1));
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
if (!PCM_REGISTERED(d) || !(d->flags & SD_F_AUTOVCHAN))
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_LOCK(d);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_WAIT(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
switch (VCHAN_SYSCTL_DIR(oidp->oid_arg1)) {
case VCHAN_PLAY:
direction = PCMDIR_PLAY;
vchancount = d->pvchancount;
vchanformat = &d->pvchanformat;
break;
case VCHAN_REC:
direction = PCMDIR_REC;
vchancount = d->rvchancount;
vchanformat = &d->rvchanformat;
break;
default:
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
break;
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
if (vchancount < 1) {
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_ACQUIRE(d);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (direction == PCMDIR_PLAY)
pcm_getparentchannel(d, &c, NULL);
else
pcm_getparentchannel(d, NULL, &c);
if (c == NULL) {
PCM_RELEASE_QUICK(d);
return (EINVAL);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
KASSERT(direction == c->direction, ("%s(): invalid direction %d/%d",
__func__, direction, c->direction));
CHN_LOCK(c);
bzero(fmtstr, sizeof(fmtstr));
if (snd_afmt2str(c->format, fmtstr, sizeof(fmtstr)) != c->format)
strlcpy(fmtstr, "<ERROR>", sizeof(fmtstr));
CHN_UNLOCK(c);
ret = sysctl_handle_string(oidp, fmtstr, sizeof(fmtstr), req);
if (ret != 0 || req->newptr == NULL) {
PCM_RELEASE_QUICK(d);
return (ret);
}
newfmt = snd_str2afmt(fmtstr);
if (newfmt == 0 || !(newfmt & AFMT_VCHAN)) {
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_RELEASE_QUICK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_LOCK(c);
if (newfmt != c->format && VCHAN_ACCESSIBLE(c)) {
if (CHN_STARTED(c)) {
chn_abort(c);
restart = 1;
} else
restart = 0;
ret = chn_reset(c, newfmt, c->speed);
if (ret == 0) {
*vchanformat = c->format;
if (restart != 0) {
CHN_FOREACH(ch, c, children.busy) {
CHN_LOCK(ch);
if (VCHAN_SYNC_REQUIRED(ch))
vchan_sync(ch);
CHN_UNLOCK(ch);
}
c->flags |= CHN_F_DIRTY;
ret = chn_start(c, 1);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
}
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_UNLOCK(c);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_RELEASE_QUICK(d);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (ret);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
/* virtual channel interface */
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
#define VCHAN_FMT_HINT(x) ((x) == PCMDIR_PLAY_VIRTUAL) ? \
"play.vchanformat" : "rec.vchanformat"
#define VCHAN_SPD_HINT(x) ((x) == PCMDIR_PLAY_VIRTUAL) ? \
"play.vchanrate" : "rec.vchanrate"
int
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
vchan_create(struct pcm_channel *parent, int num)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct snddev_info *d;
struct pcm_channel *ch;
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
struct pcmchan_caps *parent_caps;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
uint32_t vchanfmt, vchanspd;
int ret, direction, r, save;
d = parent->parentsnddev;
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_BUSYASSERT(d);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_LOCKASSERT(parent);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
if (!(parent->flags & CHN_F_BUSY))
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EBUSY);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (!(parent->direction == PCMDIR_PLAY ||
parent->direction == PCMDIR_REC))
return (EINVAL);
d = parent->parentsnddev;
CHN_UNLOCK(parent);
PCM_LOCK(d);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
if (parent->direction == PCMDIR_PLAY) {
direction = PCMDIR_PLAY_VIRTUAL;
vchanfmt = d->pvchanformat;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
vchanspd = d->pvchanrate;
} else {
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
direction = PCMDIR_REC_VIRTUAL;
vchanfmt = d->rvchanformat;
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
vchanspd = d->rvchanrate;
}
Change KASSERT() in feed_vchan16() into an explicit test and call to panic() so that the buffer overflow just beyond this point is always caught, even when the code is not compiled with INVARIANTS. Change chn_setblocksize() buffer reallocation code to attempt to avoid the feed_vchan16() buffer overflow by attempting to always keep the bufsoft buffer at least as large as the bufhard buffer. Print a diagnositic message Danger! %s bufsoft size increasing from %d to %d after CHANNEL_SETBLOCKSIZE() if our best attempts fail. If feed_vchan16() were to be called by the interrupt handler while locks are dropped in chn_setblocksize() to increase the size bufsoft to match the size of bufhard, the panic() code in feed_vchan16() will be triggered. If the diagnostic message is printed, it is a warning that a panic is possible if the system were to see events in an "unlucky" order. Change the locking code to avoid the need for MTX_RECURSIVE mutexes. Add the MTX_DUPOK option to the channel mutexes and change the locking sequence to always lock the parent channel before its children to avoid the possibility of deadlock. Actually implement locking assertions for the channel mutexes and fix the problems found by the resulting assertion violations. Clean up the locking code in dsp_ioctl(). Allocate the channel buffers using the malloc() M_WAITOK option instead of M_NOWAIT so that buffer allocation won't fail. Drop locks across the malloc() calls. Add/modify KASSERTS() in attempt to detect problems early. Abuse layering by adding a pointer to the snd_dbuf structure that points back to the pcm_channel that owns it. This allows sndbuf_resize() to do proper locking without having to change the its API, which is used by the hardware drivers. Don't dereference a NULL pointer when setting hw.snd.maxautovchans if a hardware driver is not loaded. Noticed by Ryan Sommers <ryans at gamersimpact.com>. Tested by: Stefan Ehmann <shoesoft AT gmx.net> Tested by: matk (Mathew Kanner) Tested by: Gordon Bergling <gbergling AT 0xfce3.net>
2004-01-28 08:02:15 +00:00
/* create a new playback channel */
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
ch = pcm_chn_create(d, parent, &vchan_class, direction, num, parent);
if (ch == NULL) {
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_UNLOCK(d);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
CHN_LOCK(parent);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (ENODEV);
}
/* add us to our grandparent's channel list */
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
ret = pcm_chn_add(d, ch);
PCM_UNLOCK(d);
if (ret != 0) {
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
pcm_chn_destroy(ch);
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
CHN_LOCK(parent);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (ret);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
CHN_LOCK(parent);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
/*
* Add us to our parent channel's children in reverse order
* so future destruction will pick the last (biggest number)
* channel.
*/
CHN_INSERT_SORT_DESCEND(parent, ch, children);
if (parent->flags & CHN_F_HAS_VCHAN)
return (0);
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
parent->flags |= CHN_F_HAS_VCHAN;
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
parent_caps = chn_getcaps(parent);
if (parent_caps == NULL)
ret = EINVAL;
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
save = 0;
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (ret == 0 && vchanfmt == 0) {
const char *vfmt;
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_UNLOCK(parent);
r = resource_string_value(device_get_name(parent->dev),
device_get_unit(parent->dev), VCHAN_FMT_HINT(direction),
&vfmt);
CHN_LOCK(parent);
if (r != 0)
vfmt = NULL;
if (vfmt != NULL) {
vchanfmt = snd_str2afmt(vfmt);
if (vchanfmt != 0 && !(vchanfmt & AFMT_VCHAN))
vchanfmt = 0;
}
if (vchanfmt == 0)
vchanfmt = VCHAN_DEFAULT_FORMAT;
save = 1;
}
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (ret == 0 && vchanspd == 0) {
/*
* This is very sad. Few soundcards advertised as being
* able to do (insanely) higher/lower speed, but in
* reality, they simply can't. At least, we give user chance
* to set sane value via kernel hints or sysctl.
*/
CHN_UNLOCK(parent);
r = resource_int_value(device_get_name(parent->dev),
device_get_unit(parent->dev), VCHAN_SPD_HINT(direction),
&vchanspd);
CHN_LOCK(parent);
if (r != 0) {
/*
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
* No saved value, no hint, NOTHING.
*
* Workaround for sb16 running
* poorly at 45k / 49k.
*/
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
switch (parent_caps->maxspeed) {
case 45000:
case 49000:
vchanspd = 44100;
break;
default:
vchanspd = VCHAN_DEFAULT_RATE;
if (vchanspd > parent_caps->maxspeed)
vchanspd = parent_caps->maxspeed;
break;
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (vchanspd < parent_caps->minspeed)
vchanspd = parent_caps->minspeed;
}
save = 1;
}
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (ret == 0) {
/*
* Limit the speed between feeder_rate_min <-> feeder_rate_max.
*/
if (vchanspd < feeder_rate_min)
vchanspd = feeder_rate_min;
if (vchanspd > feeder_rate_max)
vchanspd = feeder_rate_max;
if (feeder_rate_round) {
RANGE(vchanspd, parent_caps->minspeed,
parent_caps->maxspeed);
vchanspd = CHANNEL_SETSPEED(parent->methods,
parent->devinfo, vchanspd);
Whats New: 1. Support wide range sampling rate, as low as 1hz up to int32 max (which is, insane) through new feeder_rate, multiple precisions choice (32/64 bit converter). This is indeed, quite insane, but it does give us more room and flexibility. Plenty sysctl options to adjust resampling characteristics. 2. Support 24/32 bit pcm format conversion through new, much improved, simplified and optimized feeder_fmt. Changes: 1. buffer.c / dsp.c / sound.h * Support for 24/32 AFMT. 2. feeder_rate.c * New implementation of sampling rate conversion with 32/64 bit precision, 1 - int32max hz (which is, ridiculous, yet very addictive). Much improved / smarter buffer management to not cause any missing samples at the end of conversion process * Tunable sysctls for various aspect: hw.snd.feeder_rate_ratemin - minimum allowable sampling rate (default to 4000) hw.snd.feeder_rate_ratemax - maximum allowable sampling rate (default to 1102500) hw.snd.feeder_rate_buffersize - conversion buffer size (default to 8192) hw.snd.feeder_rate_scaling - scaling / conversion method (please refer to the source for explaination). Default to previous implementation type. 3. feeder_fmt.c / sound.h * New implementation, support for 24/32bit conversion, optimized, and simplified. Few routines has been removed (8 to xlaw, 16 to 8). It just doesn't make sense. 4. channel.c * Support for 24/32 AFMT * Fix wrong xruns increment, causing incorrect underruns statistic while using vchans. 5. vchan.c * Support for 24/32 AFMT * Proper speed / rate detection especially for fixed rate ac97. User can override it using kernel hint: hint.pcm.<unit>.vchanrate="xxxx". Notes / Issues: * Virtual Channels (vchans) Enabling vchans can really, really help to solve overrun issues. This is quite understandable, because it operates entirely within its own buffering system without relying on hardware interrupt / state. Even if you don't need vchan, just enable single channel can help much. Few soundcards (notably via8233x, sblive, possibly others) have their own hardware multi channel, and this is unfortunately beyond vchan reachability. * The arrival of 24/32 also come with a price. Applications that can do 24/32bit playback need to be recompiled (notably mplayer). Use (recompiled) mplayer to experiment / test / debug this various format using -af format=fmt. Note that 24bit seeking in mplayer is a little bit broken, sometimes can cause silence or loud static noise. Pausing / seeking few times can solve this problem. You don't have to rebuild world entirely for this. Simply copy /usr/src/sys/sys/soundcard.h to /usr/include/sys/soundcard.h would suffice. Few drivers also need recompilation, and this can be done via /usr/src/sys/modules/sound/. Support for 24bit hardware playback is beyond the scope of this changes. That would require spessific hardware driver changes. * Don't expect playing 9999999999hz is a wise decision. Be reasonable. The new feeder_rate implemention provide flexibility, not insanity. You can easily chew up your CPU with this kind of mind instability. Please use proper mosquito repellent device for this obvious cracked brain attempt. As for testing purposes, you can use (again) mplayer to generate / play with different sampling rate. Use something like "mplayer -af resample=192000:0:0 <files>". Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> Tested by: multimedia@
2005-07-31 16:16:22 +00:00
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
ret = chn_reset(parent, vchanfmt, vchanspd);
}
if (ret == 0 && save) {
/*
* Save new value.
*/
if (direction == PCMDIR_PLAY_VIRTUAL) {
d->pvchanformat = parent->format;
d->pvchanrate = parent->speed;
} else {
d->rvchanformat = parent->format;
d->rvchanrate = parent->speed;
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
}
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
/*
* If the parent channel supports digital format,
* enable passthrough mode.
*/
if (ret == 0 && snd_fmtvalid(AFMT_PASSTHROUGH, parent_caps->fmtlist)) {
parent->flags &= ~CHN_F_VCHAN_DYNAMIC;
parent->flags |= CHN_F_VCHAN_PASSTHROUGH;
}
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (ret != 0) {
CHN_REMOVE(parent, ch, children);
parent->flags &= ~CHN_F_HAS_VCHAN;
CHN_UNLOCK(parent);
PCM_LOCK(d);
if (pcm_chn_remove(d, ch) == 0) {
PCM_UNLOCK(d);
pcm_chn_destroy(ch);
} else
PCM_UNLOCK(d);
CHN_LOCK(parent);
}
return (ret);
}
int
vchan_destroy(struct pcm_channel *c)
{
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
struct pcm_channel *parent;
struct snddev_info *d;
int ret;
KASSERT(c != NULL && c->parentchannel != NULL &&
c->parentsnddev != NULL, ("%s(): invalid channel=%p",
__func__, c));
CHN_LOCKASSERT(c);
d = c->parentsnddev;
parent = c->parentchannel;
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_BUSYASSERT(d);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_LOCKASSERT(parent);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
CHN_UNLOCK(c);
if (!(parent->flags & CHN_F_BUSY))
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EBUSY);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (CHN_EMPTY(parent, children))
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
return (EINVAL);
/* remove us from our parent's children list */
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
CHN_REMOVE(parent, c, children);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
if (CHN_EMPTY(parent, children)) {
parent->flags &= ~(CHN_F_BUSY | CHN_F_HAS_VCHAN);
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
chn_reset(parent, parent->format, parent->speed);
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
}
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
CHN_UNLOCK(parent);
/* remove us from our grandparent's channel list */
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
PCM_LOCK(d);
ret = pcm_chn_remove(d, c);
PCM_UNLOCK(d);
/* destroy ourselves */
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
if (ret == 0)
ret = pcm_chn_destroy(c);
CHN_LOCK(parent);
- channel.h * New definition CHN_F_HAS_VCHAN. - channel.c * Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead of relying on SLIST_EMPTY(&channel->children) == true for better clarification and future possible usages of children (like 'slave' channel). * Various fixes, including blocksize / format bps allignment, better 24bit seeking (mplayer, others). * Improve format chain building, it's now possible to record something to a format non-native to the soundcard through various feeder format converters or to higher sampling rate. This also gains another feature, like doing vchan mixing on non s16le soundcard such as sb8. - sound.c * Increase robustness within various function that handle vchan creation / termination (these function need a total rewrite, but that would cause other major rewrite within various places too!). As far as its robustness can be guaranteed, leave it as is. * Optimize channel ordering, prefer *real* hardware playback channels over virtual channels. cat /dev/sndstat should look better. * Increase sndstat verbosity to include bufsoft/bufhard allocation. - vchan.c * Fix LOR 119. - http://sources.zabbadoz.net/freebsd/lor.html#119 * Reorder / increase robustness of vchan_create() / destroy(). Enforce destroy_dev() during destroy operation, fix possible panic / dangling character device. - http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html * Tolerate a little bit more during mixing process, this should help non s16le soundcards. Note: Recoring in a non-native rate/format may result in overruns. A friendly application is wavrec from audio/wavplay. The problem is under investigation. Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
2005-09-10 18:10:31 +00:00
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
return (ret);
}
int
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
#ifdef SND_DEBUG
vchan_passthrough(struct pcm_channel *c, const char *caller)
#else
vchan_sync(struct pcm_channel *c)
#endif
{
int ret;
KASSERT(c != NULL && c->parentchannel != NULL &&
(c->flags & CHN_F_VIRTUAL),
("%s(): invalid passthrough", __func__));
CHN_LOCKASSERT(c);
CHN_LOCKASSERT(c->parentchannel);
sndbuf_setspd(c->bufhard, c->parentchannel->speed);
c->flags |= CHN_F_PASSTHROUGH;
ret = feeder_chain(c);
c->flags &= ~(CHN_F_DIRTY | CHN_F_PASSTHROUGH);
if (ret != 0)
c->flags |= CHN_F_DIRTY;
#ifdef SND_DEBUG
if (snd_passthrough_verbose != 0) {
char *devname, buf[CHN_NAMELEN];
devname = dsp_unit2name(buf, sizeof(buf), c->unit);
device_printf(c->dev,
"%s(%s/%s) %s() -> re-sync err=%d\n",
__func__, (devname != NULL) ? devname : "dspX", c->comm,
caller, ret);
}
#endif
return (ret);
}
void
vchan_initsys(device_t dev)
{
struct snddev_info *d;
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
int unit;
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
unit = device_get_unit(dev);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
d = device_get_softc(dev);
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
/* Play */
SYSCTL_ADD_PROC(&d->play_sysctl_ctx,
SYSCTL_CHILDREN(d->play_sysctl_tree),
OID_AUTO, "vchans", CTLTYPE_INT | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, PLAY), VCHAN_SYSCTL_DATA_SIZE,
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchans, "I", "total allocated virtual channel");
SYSCTL_ADD_PROC(&d->play_sysctl_ctx,
SYSCTL_CHILDREN(d->play_sysctl_tree),
OID_AUTO, "vchanmode", CTLTYPE_STRING | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, PLAY), VCHAN_SYSCTL_DATA_SIZE,
sysctl_dev_pcm_vchanmode, "A",
"vchan format/rate selection: 0=fixed, 1=passthrough, 2=adaptive");
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
SYSCTL_ADD_PROC(&d->play_sysctl_ctx,
SYSCTL_CHILDREN(d->play_sysctl_tree),
OID_AUTO, "vchanrate", CTLTYPE_INT | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, PLAY), VCHAN_SYSCTL_DATA_SIZE,
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchanrate, "I", "virtual channel mixing speed/rate");
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
SYSCTL_ADD_PROC(&d->play_sysctl_ctx,
SYSCTL_CHILDREN(d->play_sysctl_tree),
OID_AUTO, "vchanformat", CTLTYPE_STRING | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, PLAY), VCHAN_SYSCTL_DATA_SIZE,
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchanformat, "A", "virtual channel mixing format");
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
/* Rec */
SYSCTL_ADD_PROC(&d->rec_sysctl_ctx,
SYSCTL_CHILDREN(d->rec_sysctl_tree),
OID_AUTO, "vchans", CTLTYPE_INT | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, REC), VCHAN_SYSCTL_DATA_SIZE,
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchans, "I", "total allocated virtual channel");
SYSCTL_ADD_PROC(&d->rec_sysctl_ctx,
SYSCTL_CHILDREN(d->rec_sysctl_tree),
OID_AUTO, "vchanmode", CTLTYPE_STRING | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, REC), VCHAN_SYSCTL_DATA_SIZE,
sysctl_dev_pcm_vchanmode, "A",
"vchan format/rate selection: 0=fixed, 1=passthrough, 2=adaptive");
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
SYSCTL_ADD_PROC(&d->rec_sysctl_ctx,
SYSCTL_CHILDREN(d->rec_sysctl_tree),
OID_AUTO, "vchanrate", CTLTYPE_INT | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, REC), VCHAN_SYSCTL_DATA_SIZE,
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchanrate, "I", "virtual channel mixing speed/rate");
Last major commit and updates for RELENG_7: - Rework the entire pcm_channel structure: * Remove rarely used link placeholder, instead, make each pcm_channel as head/link of each own/each other. Unlock - Lock sequence due to sleep malloc has been reduced. * Implement "busy" queue which will contain list of busy/active channels. This greatly reduce locking contention for example while servicing interrupt for hardware with many channels or when virtual channels reach its 256 peak channels. - So I heard you like v chan ... O RLY? Welcome to Virtual **Record** Channels (vrec, rec vchans, vchans for recording, Rec-Chan, you decide), the ultimate solutions for your nagging O_RDWR full-duplex wannabe (note: flash plugins) monopolizing single record channel causing EBUSY. Vrec works exactly like Vchans (or, should I rename it to "Vplay" :) , except that it operates on the opposite direction (recording). Up to 256 vrecs (like vchans) are possible. Notes: * Relocate dev.pcm.%d.{vchans,vchanformat,vchanrate} to each of its respective node/direction: dev.pcm.%d.play.* for "play" (cdev = dsp%d.vp%d) dev.pcm.%d.rec.* for "record" (cdev = dsp%d.vr%d) * Don't expect that it will magically give you ability to split "recording source" (eg: 1 channel for cdrom, 1 channel for mic, etc). Just admit that you only have a *single* recording source / channel. Please bug your hardware vendor instead :) - Bump maxautovchans from 4 to 16. For a full-fledged multimedia desktop/workstation with too many soundservers installed (esound, artsd, jackd, pulse/polypaudio, ding-dong pling plong mudkip fuh fuh, etc), 4 seems inadequate. There will be no memory penalty here, since virtual channels are allocate only by demand. - Nuke/Rework the entire statically created cdev entries. Everything is clonable through snd own clone manager which designed to withstand many kind of abusive devfs droids such as: * while : ; do /bin/test -e /dev/dsp ; done * jot 16777216 0 | while read x ; do ls /dev/dsp0.$x ; done * hundreds (could be thousands) concurrent threads/process opening "/dev/dsp" (previously, this might result EBUSY even with just 3 contesting threads/procs). o Reusable clone objects (instead of creating new one like there's no tomorrow) after certain expiration deadline. The clone allocator will decide whether to reuse, share, or creating new clone. o Automatic garbage collector. - Dynamic unit magic allocator. Maximum attached soundcards can be tuned using tunable "hw.snd.maxunit" (Default to 512). Minimum is 16, and maximum is 2048. - ..other fixes, mostly related to concurrency issues. joel@ will do the manpage updates on sound(4). Have fun.
2007-05-31 18:43:33 +00:00
SYSCTL_ADD_PROC(&d->rec_sysctl_ctx,
SYSCTL_CHILDREN(d->rec_sysctl_tree),
OID_AUTO, "vchanformat", CTLTYPE_STRING | CTLFLAG_RW,
VCHAN_SYSCTL_DATA(unit, REC), VCHAN_SYSCTL_DATA_SIZE,
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
sysctl_dev_pcm_vchanformat, "A", "virtual channel mixing format");
}