d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3feffbd796
freebsd-dev/usr.bin/netstat/netstat.h

170 lines
6.2 KiB
C
Raw Normal View History

style(9) + kread is not a boolean, so check it as such + fix $FreeBSD$ Ids + denote copyrights with /*- + misc whitespace changes.
2008-01-02 23:26:11 +00:00
/*-
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
* Copyright (c) 1992, 1993
* Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)netstat.h 8.2 (Berkeley) 1/4/94
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
* $FreeBSD$
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
*/
#include <sys/cdefs.h>
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern int Aflag; /* show addresses of protocol control block */
extern int aflag; /* show all sockets (including servers) */
extern int bflag; /* show i/f total bytes in/out */
extern int dflag; /* show i/f dropped packets */
extern int gflag; /* show group (multicast) routing or stats */
Add a new switch -h for interface stats mode, which prints all interface statistics in human readable form. In collaboration with: vsevolod Reviewed by: cperciva
2005-08-18 21:04:12 +00:00
extern int hflag; /* show counters in human readable format */
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern int iflag; /* show interfaces */
extern int Lflag; /* show size of listen queues */
extern int mflag; /* show memory stats */
Add a new option, -q howmany, which when used in conjuction with -w, exits netstat after _howmany_ outputs. Requested by: thomasa Reviewed by: freebsd-net (bms, old version in early 2007) MFC after: 1 month
2010-01-11 03:00:17 +00:00
extern int noutputs; /* how much outputs before we exit */
add the option -S for printing port numbers symbolically but addresses numerically. clean up the CFLAGS in Makefile.
2001-06-15 00:25:44 +00:00
extern int numeric_addr; /* show addresses numerically */
extern int numeric_port; /* show ports numerically */
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern int rflag; /* show routing tables (or routing stats) */
extern int sflag; /* show protocol statistics */
Add new, per connection, statistics for TCP, including: Retransmitted Packets Zero Window Advertisements Out of Order Receives These statistics are available via the -T argument to netstat(1). MFC after: 2 weeks
2010-11-17 18:55:12 +00:00
extern int Tflag; /* show TCP control block info */
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern int Wflag; /* wide display */
Minimize changes CURRENT<->releng7.
2008-09-01 15:04:38 +00:00
extern int xflag; /* extended display, includes all socket buffer info */
Add netstat(1) knob to reset net.inet.{ip|icmp|tcp|udp|igmp}.stats. For example, ``netstat -s -p ip -z'' will show and reset IP stats. PR: bin/17338
2001-06-23 17:17:59 +00:00
extern int zflag; /* zero stats */
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern int interval; /* repeat interval for i/f stats */
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern char *interface; /* desired i/f for stats, or NULL for all i/fs */
extern int unit; /* unit number for above */
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
Add a -W flag that tells netstat not to truncate addresses even if they are too long for the column they're printed in. Move variable definitions out of netstat.h and into main.c. Clean up some warnings.
2001-03-15 20:46:04 +00:00
extern int af; /* address family */
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
extern int live; /* true if we are examining a live system */
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
int kread(u_long addr, void *buf, size_t size);
Achieve WARNS=2 by using uintmax_t to pass around 64-bit quantities, including to printf(). Using uintmax_t is also robust to further extensions in both the C language and the bitwidth of kernel counters. Tested on: i386 amd64 ia64
2006-07-28 16:09:19 +00:00
const char *plural(uintmax_t);
const char *plurales(uintmax_t);
const char *pluralies(uintmax_t);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
Teach netstat(1) to print out netisr statistics when given the -Q argument. Currently supports only reporting on live systems via sysctl, kmem support needs to be edded. MFC after: 1 week Sponsored by: Juniper Networks
2010-02-22 15:57:36 +00:00
struct sockaddr;
struct socket;
struct xsocket;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
int sotoxsocket(struct socket *, struct xsocket *);
void protopr(u_long, const char *, int, int);
void tcp_stats(u_long, const char *, int, int);
void udp_stats(u_long, const char *, int, int);
Adds support for SCTP.
2007-06-09 13:44:09 +00:00
#ifdef SCTP
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void sctp_protopr(u_long, const char *, int, int);
void sctp_stats(u_long, const char *, int, int);
Adds support for SCTP.
2007-06-09 13:44:09 +00:00
#endif
Add ARP statistics to the kernel and netstat. New counters now exist for: requests sent replies sent requests received replies received packets received total packets dropped due to no ARP entry entrys timed out Duplicate IPs seen The new statistics are seen in the netstat command when it is given the -s command line switch. MFC after: 2 weeks In collaboration with: bz
2009-09-03 21:10:57 +00:00
void arp_stats(u_long, const char *, int, int);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void ip_stats(u_long, const char *, int, int);
void icmp_stats(u_long, const char *, int, int);
void igmp_stats(u_long, const char *, int, int);
void pim_stats(u_long, const char *, int, int);
style(9) + kread is not a boolean, so check it as such + fix $FreeBSD$ Ids + denote copyrights with /*- + misc whitespace changes.
2008-01-02 23:26:11 +00:00
void carp_stats(u_long, const char *, int, int);
void pfsync_stats(u_long, const char *, int, int);
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
#ifdef IPSEC
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void ipsec_stats(u_long, const char *, int, int);
style(9) + kread is not a boolean, so check it as such + fix $FreeBSD$ Ids + denote copyrights with /*- + misc whitespace changes.
2008-01-02 23:26:11 +00:00
void esp_stats(u_long, const char *, int, int);
void ah_stats(u_long, const char *, int, int);
void ipcomp_stats(u_long, const char *, int, int);
Add support for printing IPSEC protocol stats if the kernel was compiled with FAST_IPSEC rather than the KAME IPSEC stack. Note that the output of "netstat -s -p ipsec" differs depending on which stack is compiled into the kernel since they each keep different stats. This delta also adds the "esp", "ah", and "ipcomp" protocol stats, which are also available when the kernel is compiled with the FAST_IPSEC stack (e.g. "netstat -s -p esp"). Submitted by: Matt Titus <titus at nttmcl dot com> MFC after: 3 days
2005-12-28 20:36:55 +00:00
#endif
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
#ifdef INET6
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void ip6_stats(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void ip6_ifstats(char *);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void icmp6_stats(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void icmp6_ifstats(char *);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void pim6_stats(u_long, const char *, int, int);
void rip6_stats(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void mroute6pr(u_long, u_long);
void mrt6_stats(u_long);
sync with latest kame netstat. basically, more statistics
2000-07-04 16:26:46 +00:00
struct sockaddr_in6;
struct in6_addr;
- Hide the internal scope address representation of the KAME IPv6 stack from the output of `netstat -ani'. - The node-local multicast address in the output of `netstat -rn' should be handled as well. Spotted by: Bernd Walter <ticso__at__cicely7.cicely.de>
2011-01-20 15:22:01 +00:00
void in6_fillscopeid(struct sockaddr_in6 *);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
char *routename6(struct sockaddr_in6 *);
const char *netname6(struct sockaddr_in6 *, struct in6_addr *);
void inet6print(struct in6_addr *, int, const char *, int);
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
#endif /*INET6*/
add pfkeystat. sync with kame
2000-07-05 02:02:54 +00:00
#ifdef IPSEC
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void pfkey_stats(u_long, const char *, int, int);
add pfkeystat. sync with kame
2000-07-05 02:02:54 +00:00
#endif
Modify netstat -mb to use libmemstat when accessing a core dump or live kernel memory and not using sysctl. Previously, libmemstat was used only for the live kernel via sysctl paths. This results in netstat output becoming both more consistent between core dumps and the live kernel, and also more information in the core dump case than previously (i.e., mbuf cache information). Statistics relating to sfbufs still rely on a kvm descriptor as they are not currently exposed via libmemstat. netstat -m operating on a core is still unable to print certain sfbuf stats available on the live kernel. MFC after: 1 week
2005-11-13 14:06:01 +00:00
void mbpr(void *, u_long);
BSD 4.4 Lite Usr.bin Sources
1994-05-27 12:33:43 +00:00
Teach netstat -Q to work with -N and -M by adding libkvm versions of data query routines. This code is necessarily more fragile in the presence of kernel changes than querying the kernel via sysctl (the default), but useful when investigating crashes or live kernel state via firewire. MFC after: 1 week Sponsored by: Juniper Networks
2010-03-01 00:46:45 +00:00
void netisr_stats(void *);
Teach netstat(1) to print out netisr statistics when given the -Q argument. Currently supports only reporting on live systems via sysctl, kmem support needs to be edded. MFC after: 1 week Sponsored by: Juniper Networks
2010-02-22 15:57:36 +00:00
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void hostpr(u_long, u_long);
void impstats(u_long, u_long);
void intpr(int, u_long, void (*)(char *));
void pr_rthdr(int);
void pr_family(int);
void rt_stats(u_long, u_long);
char *ipx_pnet(struct sockaddr *);
char *ipx_phost(struct sockaddr *);
char *ns_phost(struct sockaddr *);
void upHex(char *);
Fix netname() [1] and routename() on big-endian LP64 archs. Submitted by: Yuri Pankov [1] MFC after: 3 days
2008-02-07 23:00:40 +00:00
char *routename(in_addr_t);
char *netname(in_addr_t, u_long);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
char *atalk_print(struct sockaddr *, int);
char *atalk_print2(struct sockaddr *, struct sockaddr *, int);
char *ipx_print(struct sockaddr *);
char *ns_print(struct sockaddr *);
void routepr(u_long);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void ipxprotopr(u_long, const char *, int, int);
void spx_stats(u_long, const char *, int, int);
void ipx_stats(u_long, const char *, int, int);
void ipxerr_stats(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void nsprotopr(u_long, const char *, int, int);
void spp_stats(u_long, const char *, int, int);
void idp_stats(u_long, const char *, int, int);
void nserr_stats(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void atalkprotopr(u_long, const char *, int, int);
void ddp_stats(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
add new build knobs and jigger some existing controls to improve control over the result of buildworld and installworld; this especially helps packaging systems such as nanobsd Reviewed by: various (posted to arch) MFC after: 1 month
2008-09-21 22:02:26 +00:00
#ifdef NETGRAPH
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void netgraphprotopr(u_long, const char *, int, int);
add new build knobs and jigger some existing controls to improve control over the result of buildworld and installworld; this especially helps packaging systems such as nanobsd Reviewed by: various (posted to arch) MFC after: 1 month
2008-09-21 22:02:26 +00:00
#endif
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
netstat(1) support for UNIX SOCK_SEQPACKET sockets -- changes were required only for the kvm case, as we supported SOCK_SEQPACKET via sysctl already. Sponsored by: Google MFC after: 3 months
2009-10-05 15:06:14 +00:00
void unixpr(u_long, u_long, u_long, u_long, u_long);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void esis_stats(u_long, const char *, int, int);
void clnp_stats(u_long, const char *, int, int);
void cltp_stats(u_long, const char *, int, int);
void iso_protopr(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void iso_protopr1(u_long, int);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void tp_protopr(u_long, const char *, int, int);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void tp_inproto(u_long);
void tp_stats(caddr_t, caddr_t);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
void mroutepr(u_long, u_long, u_long);
Fixed style bugs created in rev.1.27 by removing "__P(" and its closing ")" without removing the space before it.
2003-12-29 04:34:36 +00:00
void mrt_stats(u_long);
Merge bpfstat's functionality into the netstat(1) utility. This adds a -B option which causes bpf peers to be printed. This option can be used in conjunction with -I if information about specific interfaces is desired. This is similar to what NetBSD added to their version of netstat. $ netstat -B Pid Netif Flags Recv Drop Match Sblen Hblen Command 1137 lo0 p--s-- 0 0 0 0 0 tcpdump 205 sis0 -ifs-l 37331 0 1 0 0 dhclient $ $ netstat -I lo0 -B Pid Netif Flags Recv Drop Match Sblen Hblen Command 1174 lo0 p--s-- 0 0 0 0 0 tcpdump $ -Add bpf.c which stores all the code for retrieving and parsing bpf related statistics. -Modify main.c to add support for the -B option and hook it into the program logic. -Add bpf.c to the build. -Document this new functionality in the man page and bump the revision date. -Add prototype for bpf_stats function.
2005-09-07 17:35:16 +00:00
void bpf_stats(char *);
Reference in New Issue Copy Permalink